If writeback cache is enabled, then writes might get reordered with
chmod/chown/utimes. The problem with this is that performing the write in
the fuse daemon might itself change some of these attributes. In such case
the following sequence of operations will result in file ending up with the
wrong mode, for example:
int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL);
write (fd, "1", 1);
fchown (fd, 0, 0);
fchmod (fd, 04755);
close (fd);
This patch fixes this by flushing pending writes before performing
chown/chmod/utimes.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 4d99ff8f12 ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ft+G
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes of error handling cleanup of metadata accounting with qgroups
enabled
- fix swapped values for qgroup tracepoints
- fix race when handling full sync flag
- don't start unused worker thread, functionality removed already
* tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: check for the full sync flag while holding the inode lock during fsync
Btrfs: fix qgroup double free after failure to reserve metadata for delalloc
btrfs: tracepoints: Fix bad entry members of qgroup events
btrfs: tracepoints: Fix wrong parameter order for qgroup events
btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()
btrfs: don't needlessly create extent-refs kernel thread
btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()
Btrfs: add missing extents release on file extent cluster relocation error
Fixes gcc '-Wunused-but-set-variable' warning:
fs/fuse/virtio_fs.c: In function virtio_fs_wake_pending_and_unlock:
fs/fuse/virtio_fs.c:983:20: warning: variable fc set but not used [-Wunused-but-set-variable]
It is not used since commit 7ee1e2e631 ("virtiofs: No need to check
fpq->connected state")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Users reported a v5.3 performance regression and inability to establish
huge page mappings. A revised version of the ndctl "dax.sh" huge page
unit test identifies commit 23c84eb783 "dax: Fix missed wakeup with
PMD faults" as the source.
Update get_unlocked_entry() to check for NULL entries before checking
the entry order, otherwise NULL is misinterpreted as a present pte
conflict. The 'order' check needs to happen before the locked check as
an unlocked entry at the wrong order must fallback to lookup the correct
order.
Reported-by: Jeff Smits <jeff.smits@intel.com>
Reported-by: Doug Nelson <doug.nelson@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: 23c84eb783 ("dax: Fix missed wakeup with PMD faults")
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Link: https://lore.kernel.org/r/157167532455.3945484.11971474077040503994.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If regular request queue gets full, currently we sleep for a bit and
retrying submission in submitter's context. This assumes submitter is not
holding any spin lock. But this assumption is not true for background
requests. For background requests, we are called with fc->bg_lock held.
This can lead to deadlock where one thread is trying submission with
fc->bg_lock held while request completion thread has called
fuse_request_end() which tries to acquire fc->bg_lock and gets blocked. As
request completion thread gets blocked, it does not make further progress
and that means queue does not get empty and submitter can't submit more
requests.
To solve this issue, retry submission with the help of a worker, instead of
retrying in submitter's context. We already do this for hiprio/forget
requests.
Reported-by: Chirantan Ekbote <chirantan@chromium.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If virtqueue is full, we put forget requests on a list and these forgets
are dispatched later using a worker. As of now we don't count these forgets
in fsvq->in_flight variable. This means when queue is being drained, we
have to have special logic to first drain these pending requests and then
wait for fsvq->in_flight to go to zero.
By counting pending forgets in fsvq->in_flight, we can get rid of special
logic and just wait for in_flight to go to zero. Worker thread will kick
and drain all the forgets anyway, leading in_flight to zero.
I also need similar logic for normal request queue in next patch where I am
about to defer request submission in the worker context if queue is full.
This simplifies the code a bit.
Also add two helper functions to inc/dec in_flight. Decrement in_flight
helper will later used to call completion when in_flight reaches zero.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FR_SENT flag should be set when request has been sent successfully sent
over virtqueue. This is used by interrupt logic to figure out if interrupt
request should be sent or not.
Also add it to fqp->processing list after sending it successfully.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In virtiofs we keep per queue connected state in virtio_fs_vq->connected
and use that to end request if queue is not connected. And virtiofs does
not even touch fpq->connected state.
We probably need to merge these two at some point of time. For now,
simplify the code a bit and do not worry about checking state of
fpq->connected.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Submission context can hold some locks which end request code tries to hold
again and deadlock can occur. For example, fc->bg_lock. If a background
request is being submitted, it might hold fc->bg_lock and if we could not
submit request (because device went away) and tried to end request, then
deadlock happens. During testing, I also got a warning from deadlock
detection code.
So put requests on a list and end requests from a worker thread.
I got following warning from deadlock detector.
[ 603.137138] WARNING: possible recursive locking detected
[ 603.137142] --------------------------------------------
[ 603.137144] blogbench/2036 is trying to acquire lock:
[ 603.137149] 00000000f0f51107 (&(&fc->bg_lock)->rlock){+.+.}, at: fuse_request_end+0xdf/0x1c0 [fuse]
[ 603.140701]
[ 603.140701] but task is already holding lock:
[ 603.140703] 00000000f0f51107 (&(&fc->bg_lock)->rlock){+.+.}, at: fuse_simple_background+0x92/0x1d0 [fuse]
[ 603.140713]
[ 603.140713] other info that might help us debug this:
[ 603.140714] Possible unsafe locking scenario:
[ 603.140714]
[ 603.140715] CPU0
[ 603.140716] ----
[ 603.140716] lock(&(&fc->bg_lock)->rlock);
[ 603.140718] lock(&(&fc->bg_lock)->rlock);
[ 603.140719]
[ 603.140719] *** DEADLOCK ***
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If the FUSE_READDIRPLUS_AUTO feature is enabled, then lookups on a
directory before/during readdir are used as an indication that READDIRPLUS
should be used instead of READDIR. However if the lookup turns out to be
negative, then selecting READDIRPLUS makes no sense.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move the check for async request after check for the request being already
finished and done with.
Reported-by: syzbot+ae0bb7aae3de6b4594e2@syzkaller.appspotmail.com
Fixes: d49937749f ("fuse: stop copying args to fuse_req")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
cifs_setattr_nounix has two paths which miss free operations
for xid and fullpath.
Use goto cifs_setattr_exit like other paths to fix them.
CC: Stable <stable@vger.kernel.org>
Fixes: aa081859b1 ("cifs: flush before set-info if we have writeable handles")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
According to MS-CIFS specification MID 0xFFFF should not be used by the
CIFS client, but we actually do. Besides, this has proven to cause races
leading to oops between SendReceive2/cifs_demultiplex_thread. On SMB1,
MID is a 2 byte value easy to reach in CurrentMid which may conflict with
an oplock break notification request coming from server
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
It could be confusing why we set granularity to 1 seconds rather
than 2 seconds (1 second is the max the VFS allows) for these
mounts to very old servers ...
Signed-off-by: Steve French <stfrench@microsoft.com>
We only want to avoid blocking in connect when mounting SMB root
filesystems, otherwise bail out from generic_ip_connect() so cifs.ko
can perform any reconnect failover appropriately.
This fixes DFS failover/reconnection tests in upstream buildbot.
Fixes: 8eecd1c2e5 ("cifs: Add support for root file systems")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Merge misc fixes from Andrew Morton:
"Rather a lot of fixes, almost all affecting mm/"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
scripts/gdb: fix debugging modules on s390
kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register
mm/thp: allow dropping THP from page cache
mm/vmscan.c: support removing arbitrary sized pages from mapping
mm/thp: fix node page state in split_huge_page_to_list()
proc/meminfo: fix output alignment
mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch
mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition
mm: include <linux/huge_mm.h> for is_vma_temporary_stack
zram: fix race between backing_dev_show and backing_dev_store
mm/memcontrol: update lruvec counters in mem_cgroup_move_account
ocfs2: fix panic due to ocfs2_wq is null
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()
mm: memblock: do not enforce current limit for memblock_phys* family
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size
mm/gup: fix a misnamed "write" argument, and a related bug
mm/gup_benchmark: add a missing "w" to getopt string
ocfs2: fix error handling in ocfs2_setattr()
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release
mm/memunmap: don't access uninitialized memmap in memunmap_pages()
...
Patch series "Fixes for THP in page cache", v2.
This patch (of 5):
Add extra space for FileHugePages and FilePmdMapped, so the output is
aligned with other rows.
Link: http://lkml.kernel.org/r/20191017164223.2762148-2-songliubraving@fb.com
Fixes: 60fbf0ab5d ("mm,thp: stats for file backed THP")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Should set transfer_to[USRQUOTA/GRPQUOTA] to NULL on error case before
jumping to do dqput().
Link: http://lkml.kernel.org/r/20191010082349.1134-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup
We have initialized memmaps either when the section is online or when the
page was initialized to the ZONE_DEVICE. Uninitialized memmaps contain
garbage and in the worst case trigger kernel BUGs, especially with
CONFIG_PAGE_POISONING.
For example, not onlining a DIMM during boot and calling /proc/kpagecount
with CONFIG_PAGE_POISONING:
:/# cat /proc/kpagecount > tmp.test
BUG: unable to handle page fault for address: fffffffffffffffe
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114616067 P4D 114616067 PUD 114618067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
RIP: 0010:kpagecount_read+0xce/0x1e0
Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202
RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000
RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08
FS: 00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0
Call Trace:
proc_reg_read+0x3c/0x60
vfs_read+0xc5/0x180
ksys_read+0x68/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
For now, let's drop support for ZONE_DEVICE from the three pseudo files
in order to fix this. To distinguish offline memory (with garbage
memmap) from ZONE_DEVICE memory with properly initialized memmaps, we
would have to check get_dev_pagemap() and pfn_zone_device_reserved()
right now. The usage of both (especially, special casing devmem) is
frowned upon and needs to be reworked.
The fundamental issue we have is:
if (pfn_to_online_page(pfn)) {
/* memmap initialized */
} else if (pfn_valid(pfn)) {
/*
* ???
* a) offline memory. memmap garbage.
* b) devmem: memmap initialized to ZONE_DEVICE.
* c) devmem: reserved for driver. memmap garbage.
* (d) devmem: memmap currently initializing - garbage)
*/
}
We'll leave the pfn_zone_device_reserved() check in stable_page_flags()
in place as that function is also used from memory failure. We now no
longer dump information about pages that are not in use anymore -
offline.
Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=rvkw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith that address deadlocks, double resets,
memory leaks, and other regression.
- Fixup elv_support_iosched() for bio based devices (Damien)
- Fixup for the ahci PCS quirk (Dan)
- Socket O_NONBLOCK handling fix for io_uring (me)
- Timeout sequence io_uring fixes (yangerkun)
- MD warning fix for parameter default_layout (Song)
- blkcg activation fixes (Tejun)
- blk-rq-qos node deletion fix (Tejun)
* tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block:
nvme-pci: Set the prp2 correctly when using more than 4k page
io_uring: fix logic error in io_timeout
io_uring: fix up O_NONBLOCK handling for sockets
md/raid0: fix warning message for parameter default_layout
libata/ahci: Fix PCS quirk application
blk-rq-qos: fix first node deletion of rq_qos_del()
blkcg: Fix multiple bugs in blkcg_activate_policy()
io_uring: consider the overflow of sequence for timeout req
nvme-tcp: fix possible leakage during error flow
nvmet-loop: fix possible leakage during error flow
block: Fix elv_support_iosched()
nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
nvme: Wait for reset state when required
nvme: Prevent resets during paused controller state
nvme: Restart request timers in resetting state
nvme: Remove ADMIN_ONLY state
nvme-pci: Free tagset if no IO queues
nvme: retain split access workaround for capability reads
nvme: fix possible deadlock when nvme_update_formats fails
This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.
The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected. So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.
Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com
Fixes: 8a23eb804c ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
a patch for a mostly benign race from Dongsheng.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl2qAEkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4mZB/9HMfEfZ8JC9keyVaJpAyvV8ufTR4qs
4b8NNc0MDM01z1Z23G0o89b5M0WEDcGslh25plCifxyNIMa+L/lYKl8CTr7CLVQS
qCEtNgJ7ibfM26v7rfHOlk6Nnd07/OmjcioaHu/R3bqEQmXpcWQg+aX9C6mPh/2f
yzZTKZdKhTZfUyQQctuhNo9G+wD8K86DYT1XRbubPNQ3VtXKPuNH9rLhvLCZzbVA
6FHW05A4mwSv80MsLgN6qLSKxv/+LjV/voHepH4HygqUKw2+1lwi9BC/4k7sprQs
1jFONZ0p1sv/LdWwJYUyCpwj6d3NliXM0uvYxfyzKveWWCxb3l3gaWUS
=7scd
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A future-proofing decoding fix from Jeff intended for stable and a
patch for a mostly benign race from Dongsheng"
* tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client:
rbd: cancel lock_dwork if the wait is interrupted
ceph: just skip unrecognized info in ceph_reply_info_extra
If ctx->cached_sq_head < nxt_sq_head, we should add UINT_MAX to tmp, not
tmp_nxt.
Fixes: 5da0fb1ab3 ("io_uring: consider the overflow of sequence for timeout req")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got two issues with the non-regular file handling for non-blocking
IO:
1) We don't want to re-do a short read in full for a non-regular file,
as we can't just read the data again.
2) For non-regular files that don't support non-blocking IO attempts,
we need to punt to async context even if the file is opened as
non-blocking. Otherwise the caller always gets -EAGAIN.
Add two new request flags to handle these cases. One is just a cache
of the inode S_ISREG() status, the other tells io_uring that we always
need to punt this request to async context, even if REQ_F_NOWAIT is set.
Cc: stable@vger.kernel.org
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix a timestamp signedness problem in the new bulkstat ioctl.
-----BEGIN PGP SIGNATURE-----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=WVUx
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"The single fix converts the seconds field in the recently added XFS
bulkstat structure to a signed 64-bit quantity.
The structure layout doesn't change and so far there are no users of
the ioctl to break because we only publish xfs ioctl interfaces
through the XFS userspace development libraries, and we're still
working on a 5.3 release"
* tag 'xfs-5.4-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: change the seconds fields in xfs_bulkstat to signed
We were checking for the full fsync flag in the inode before locking the
inode, which is racy, since at that that time it might not be set but
after we acquire the inode lock some other task set it. One case where
this can happen is on a system low on memory and some concurrent task
failed to allocate an extent map and therefore set the full sync flag on
the inode, to force the next fsync to work in full mode.
A consequence of missing the full fsync flag set is hitting the problems
fixed by commit 0c713cbab6 ("Btrfs: fix race between ranged fsync and
writeback of adjacent ranges"), BUG_ON() when dropping extents from a log
tree, hitting assertion failures at tree-log.c:copy_items() or all sorts
of weird inconsistencies after replaying a log due to file extents items
representing ranges that overlap.
So just move the check such that it's done after locking the inode and
before starting writeback again.
Fixes: 0c713cbab6 ("Btrfs: fix race between ranged fsync and writeback of adjacent ranges")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to reserve metadata for delalloc operations we end up releasing
the previously reserved qgroup amount twice, once explicitly under the
'out_qgroup' label by calling btrfs_qgroup_free_meta_prealloc() and once
again, under label 'out_fail', by calling btrfs_inode_rsv_release() with a
value of 'true' for its 'qgroup_free' argument, which results in
btrfs_qgroup_free_meta_prealloc() being called again, so we end up having
a double free.
Also if we fail to reserve the necessary qgroup amount, we jump to the
label 'out_fail', which calls btrfs_inode_rsv_release() and that in turns
calls btrfs_qgroup_free_meta_prealloc(), even though we weren't able to
reserve any qgroup amount. So we freed some amount we never reserved.
So fix this by removing the call to btrfs_inode_rsv_release() in the
failure path, since it's not necessary at all as we haven't changed the
inode's block reserve in any way at this point.
Fixes: c8eaeac7b7 ("btrfs: reserve delalloc metadata differently")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For btrfs:qgroup_meta_reserve event, the trace event can output garbage:
qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2
The diff should always be alinged to sector size (4k), so there is
definitely something wrong.
[CAUSE]
For the wrong @diff, it's caused by wrong parameter order.
The correct parameters are:
struct btrfs_root, s64 diff, int type.
However the parameters used are:
struct btrfs_root, int type, s64 diff.
Fixes: 4ee0d8832c ("btrfs: qgroup: Update trace events for metadata reservation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[Background]
Btrfs qgroup uses two types of reserved space for METADATA space,
PERTRANS and PREALLOC.
PERTRANS is metadata space reserved for each transaction started by
btrfs_start_transaction().
While PREALLOC is for delalloc, where we reserve space before joining a
transaction, and finally it will be converted to PERTRANS after the
writeback is done.
[Inconsistency]
However there is inconsistency in how we handle PREALLOC metadata space.
The most obvious one is:
In btrfs_buffered_write():
btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true);
We always free qgroup PREALLOC meta space.
While in btrfs_truncate_block():
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0));
We only free qgroup PREALLOC meta space when something went wrong.
[The Correct Behavior]
The correct behavior should be the one in btrfs_buffered_write(), we
should always free PREALLOC metadata space.
The reason is, the btrfs_delalloc_* mechanism works by:
- Reserve metadata first, even it's not necessary
In btrfs_delalloc_reserve_metadata()
- Free the unused metadata space
Normally in:
btrfs_delalloc_release_extents()
|- btrfs_inode_rsv_release()
Here we do calculation on whether we should release or not.
E.g. for 64K buffered write, the metadata rsv works like:
/* The first page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=0
total: num_bytes=calc_inode_reservations()
/* The first page caused one outstanding extent, thus needs metadata
rsv */
/* The 2nd page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed
/* The 2nd page doesn't cause new outstanding extent, needs no new meta
rsv, so we free what we have reserved */
/* The 3rd~16th pages */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed (still space for one outstanding extent)
This means, if btrfs_delalloc_release_extents() determines to free some
space, then those space should be freed NOW.
So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other
than btrfs_qgroup_convert_reserved_meta().
The good news is:
- The callers are not that hot
The hottest caller is in btrfs_buffered_write(), which is already
fixed by commit 336a8bb8e3 ("btrfs: Fix wrong
btrfs_delalloc_release_extents parameter"). Thus it's not that
easy to cause false EDQUOT.
- The trans commit in advance for qgroup would hide the bug
Since commit f5fef45936 ("btrfs: qgroup: Make qgroup async transaction
commit more aggressive"), when btrfs qgroup metadata free space is slow,
it will try to commit transaction and free the wrongly converted
PERTRANS space, so it's not that easy to hit such bug.
[FIX]
So to fix the problem, remove the @qgroup_free parameter for
btrfs_delalloc_release_extents(), and always pass true to
btrfs_inode_rsv_release().
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 43b18595d6 ("btrfs: qgroup: Use separate meta reservation type for delalloc")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
64-bit time is a signed quantity in the kernel, so the bulkstat
structure should reflect that. Note that the structure size stays
the same and that we have not yet published userspace headers for this
new ioctl so there are no users to break.
Fixes: 7035f9724f ("xfs: introduce new v5 bulkstat structure")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the future, we're going to want to extend the ceph_reply_info_extra
for create replies. Currently though, the kernel code doesn't accept an
extra blob that is larger than the expected data.
Change the code to skip over any unrecognized fields at the end of the
extra blob, rather than returning -EIO.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Now we recalculate the sequence of timeout with 'req->sequence =
ctx->cached_sq_head + count - 1', judge the right place to insert
for timeout_list by compare the number of request we still expected for
completion. But we have not consider about the situation of overflow:
1. ctx->cached_sq_head + count - 1 may overflow. And a bigger count for
the new timeout req can have a small req->sequence.
2. cached_sq_head of now may overflow compare with before req. And it
will lead the timeout req with small req->sequence.
This overflow will lead to the misorder of timeout_list, which can lead
to the wrong order of the completion of timeout_list. Fix it by reuse
req->submit.sequence to store the count, and change the logic of
inserting sort in io_timeout.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Virtio-fs does not accept any mount options, so it's confusing and wrong to
show any in /proc/mounts.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The patch 32b593bfcb ("Btrfs: remove no longer used function to run
delayed refs asynchronously") removed the async delayed refs but the
thread has been created, without any use. Remove it to avoid resource
consumption.
Fixes: 32b593bfcb ("Btrfs: remove no longer used function to run delayed refs asynchronously")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix kernel-doc warning in fs/libfs.c:
fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'
Link: http://lkml.kernel.org/r/5fc9d70b-e377-0ec9-066a-970d49579041@infradead.org
Fixes: ad2a722f19 ("libfs: Open code simple_commit_write into only user")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Boaz Harrosh <boazh@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warning in fs/direct-io.c:
fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'
Also, don't mark this function as having kernel-doc notation since it is
not exported.
Link: http://lkml.kernel.org/r/97908511-4328-4a56-17fe-f43a1d7aa470@infradead.org
Fixes: 6d544bb4d9 ("dio: centralize completion in dio_complete()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zach Brown <zab@zabbo.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have been calling it virtio_fs and even file name is virtio_fs.c. Module
name is virtio_fs.ko but when registering file system user is supposed to
specify filesystem type as "virtiofs".
Masayoshi Mizuma reported that he specified filesytem type as "virtio_fs"
and got this warning on console.
------------[ cut here ]------------
request_module fs-virtio_fs succeeded, but still no fs?
WARNING: CPU: 1 PID: 1234 at fs/filesystems.c:274 get_fs_type+0x12c/0x138
Modules linked in: ... virtio_fs fuse virtio_net net_failover ...
CPU: 1 PID: 1234 Comm: mount Not tainted 5.4.0-rc1 #1
So looks like kernel could find the module virtio_fs.ko but could not find
filesystem type after that.
It probably is better to rename module name to virtiofs.ko so that above
warning goes away in case user ends up specifying wrong fs name.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
- Removed locked down from tracefs itself and moved it to the trace
directory. Having the open functions there do the lockdown checks.
- Fixed a few races with opening an instance file and the instance being
deleted (Discovered during the locked down updates). Kept separate
from the clean up code such that they can be backported to stable
easier.
- Cleaned up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fixed a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXaNhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quDIAP4v08ARNdIh+r+c4AOBm3xsOuE/d9GB
I56ydnskm+x2JQD6Ap9ivXe9yDBIErFeHNtCoq7pM8YDI4YoYIB30N0GfwM=
=7oAu
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:
- Remove lockdown from tracefs itself and moved it to the trace
directory. Have the open functions there do the lockdown checks.
- Fix a few races with opening an instance file and the instance
being deleted (Discovered during the lockdown updates). Kept
separate from the clean up code such that they can be backported to
stable easier.
- Clean up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fix a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq"
* tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
-----BEGIN PGP SIGNATURE-----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=PUeL
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191012' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Single small fix for a regression in the sequence logic for linked
commands"
* tag 'for-linus-20191012' of git://git.kernel.dk/linux-block:
io_uring: fix sequence logic for timeout requests
If on boot up, lockdown is activated for tracefs, don't even bother creating
the files. This can also prevent instances from being created if lockdown is
in effect.
Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Running the latest kernel through my "make instances" stress tests, I
triggered the following bug (with KASAN and kmemleak enabled):
mkdir invoked oom-killer:
gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0,
oom_score_adj=0
CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
Call Trace:
dump_stack+0x64/0x8c
dump_header+0x43/0x3b7
? trace_hardirqs_on+0x48/0x4a
oom_kill_process+0x68/0x2d5
out_of_memory+0x2aa/0x2d0
__alloc_pages_nodemask+0x96d/0xb67
__alloc_pages_node+0x19/0x1e
alloc_slab_page+0x17/0x45
new_slab+0xd0/0x234
___slab_alloc.constprop.86+0x18f/0x336
? alloc_inode+0x2c/0x74
? irq_trace+0x12/0x1e
? tracer_hardirqs_off+0x1d/0xd7
? __slab_alloc.constprop.85+0x21/0x53
__slab_alloc.constprop.85+0x31/0x53
? __slab_alloc.constprop.85+0x31/0x53
? alloc_inode+0x2c/0x74
kmem_cache_alloc+0x50/0x179
? alloc_inode+0x2c/0x74
alloc_inode+0x2c/0x74
new_inode_pseudo+0xf/0x48
new_inode+0x15/0x25
tracefs_get_inode+0x23/0x7c
? lookup_one_len+0x54/0x6c
tracefs_create_file+0x53/0x11d
trace_create_file+0x15/0x33
event_create_dir+0x2a3/0x34b
__trace_add_new_event+0x1c/0x26
event_trace_add_tracer+0x56/0x86
trace_array_create+0x13e/0x1e1
instance_mkdir+0x8/0x17
tracefs_syscall_mkdir+0x39/0x50
? get_dname+0x31/0x31
vfs_mkdir+0x78/0xa3
do_mkdirat+0x71/0xb0
sys_mkdir+0x19/0x1b
do_fast_syscall_32+0xb0/0xed
I bisected this down to the addition of the proxy_ops into tracefs for
lockdown. It appears that the allocation of the proxy_ops and then freeing
it in the destroy_inode callback, is causing havoc with the memory system.
Reading the documentation about destroy_inode and talking with Linus about
this, this is buggy and wrong. When defining the destroy_inode() method, it
is expected that the destroy_inode() will also free the inode, and not just
the extra allocations done in the creation of the inode. The faulty commit
causes a memory leak of the inode data structure when they are deleted.
Instead of allocating the proxy_ops (and then having to free it) the checks
should be done by the open functions themselves, and not hack into the
tracefs directory. First revert the tracefs updates for locked_down and then
later we can add the locked_down checks in the kernel/trace files.
Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home
Fixes: ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stable bugfixes:
- Fix O_DIRECT accounting of number of bytes read/written # v4.1+
Other fixes:
- Fix nfsi->nrequests count error on nfs_inode_remove_request()
- Remove redundant mirror tracking in O_DIRECT
- Fix leak of clp->cl_acceptor string
- Fix race to sk_err after xs_error_report
-----BEGIN PGP SIGNATURE-----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=XDan
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Stable bugfixes:
- Fix O_DIRECT accounting of number of bytes read/written # v4.1+
Other fixes:
- Fix nfsi->nrequests count error on nfs_inode_remove_request()
- Remove redundant mirror tracking in O_DIRECT
- Fix leak of clp->cl_acceptor string
- Fix race to sk_err after xs_error_report"
* tag 'nfs-for-5.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix race to sk_err after xs_error_report
NFSv4: Fix leak of clp->cl_acceptor string
NFS: Remove redundant mirror tracking in O_DIRECT
NFS: Fix O_DIRECT accounting of number of bytes read/written
nfs: Fix nfsi->nrequests count error on nfs_inode_remove_request
-----BEGIN PGP SIGNATURE-----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=mXpP
-----END PGP SIGNATURE-----
Merge tag '5.4-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Eight small SMB3 fixes, four for stable, and important fix for the
recent regression introduced by filesystem timestamp range patches"
* tag '5.4-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Force reval dentry if LOOKUP_REVAL flag is set
CIFS: Force revalidate inode when dentry is stale
smb3: Fix regression in time handling
smb3: remove noisy debug message and minor cleanup
CIFS: Gracefully handle QueryInfo errors during open
cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic
fs: cifs: mute -Wunused-const-variable message
smb3: cleanup some recent endian errors spotted by updated sparse
In btrfs_read_block_groups(), if we have an invalid block group which
has mixed type (DATA|METADATA) while the fs doesn't have MIXED_GROUPS
feature, we error out without freeing the block group cache.
This patch will add the missing btrfs_put_block_group() to prevent
memory leak.
Note for stable backports: the file to patch in versions <= 5.3 is
fs/btrfs/extent-tree.c
Fixes: 49303381f1 ("Btrfs: bail out if block group has different mixed flag")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we error out when finding a page at relocate_file_extent_cluster(), we
need to release the outstanding extents counter on the relocation inode,
set by the previous call to btrfs_delalloc_reserve_metadata(), otherwise
the inode's block reserve size can never decrease to zero and metadata
space is leaked. Therefore add a call to btrfs_delalloc_release_extents()
in case we can't find the target page.
Fixes: 8b62f87bad ("Btrfs: rework outstanding_extents")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two ways a request can be deferred:
1) It's a regular request that depends on another one
2) It's a timeout that tracks completions
We have a shared helper to determine whether to defer, and that
attempts to make the right decision based on the request. But we
only have some of this information in the caller. Un-share the
two timeout/defer helpers so the caller can use the right one.
Fixes: 5262f56798 ("io_uring: IORING_OP_TIMEOUT support")
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix a rounding error in the fallocate code
- Minor code cleanups
- Make sure to zero memory buffers before formatting metadata blocks
- Fix a few places where we forgot to log an inode metadata update
- Remove broken error handling that tried to clean up after a failure
but still got it wrong
-----BEGIN PGP SIGNATURE-----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=MFMd
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"A couple of small code cleanups and bug fixes for rounding errors,
metadata logging errors, and an extra layer of safeguards against
leaking memory contents.
- Fix a rounding error in the fallocate code
- Minor code cleanups
- Make sure to zero memory buffers before formatting metadata blocks
- Fix a few places where we forgot to log an inode metadata update
- Remove broken error handling that tried to clean up after a failure
but still got it wrong"
* tag 'xfs-5.4-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: move local to extent inode logging into bmap helper
xfs: remove broken error handling on failed attr sf to leaf change
xfs: log the inode on directory sf to block format change
xfs: assure zeroed memory buffers for certain kmem allocations
xfs: removed unused error variable from xchk_refcountbt_rec
xfs: remove unused flags arg from xfs_get_aghdr_buf()
xfs: Fix tail rounding in xfs_alloc_file_space()
-----BEGIN PGP SIGNATURE-----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=zpDj
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stabitly fixes, one build warning fix.
- fix inode allocation under NOFS context
- fix leak in fiemap due to concurrent append writes
- fix log-root tree updates
- fix balance convert of single profile on 32bit architectures
- silence false positive warning on old GCCs (code moved in rc1)"
* tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: silence maybe-uninitialized warning in clone_range
btrfs: fix uninitialized ret in ref-verify
btrfs: allocate new inode in NOFS context
btrfs: fix balance convert to single on 32-bit host CPUs
btrfs: fix incorrect updating of log root tree
Btrfs: fix memory leak due to concurrent append writes with fiemap
Pull dcache_readdir() fixes from Al Viro:
"The couple of patches you'd been OK with; no hlist conversion yet, and
cursors are still in the list of children"
[ Al is referring to future work to avoid some nasty O(n**2) behavior
with the readdir cursors when you have lots of concurrent readdirs.
This is just a fix for a race with a trivial cleanup - Linus ]
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: take cursors out of list when moving past the end of directory
Fix the locking in dcache_readdir() and friends
Pull mount fixes from Al Viro:
"A couple of regressions from the mount series"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add missing blkdev_put() in get_tree_bdev()
shmem: fix LSM options parsing
We should not remove the workqueue, we just need to ensure that the
workqueues are synced. The workqueues are torn down on ctx removal.
Cc: stable@vger.kernel.org
Fixes: 6b06314c47 ("io_uring: add file set registration")
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The callers of xfs_bmap_local_to_extents_empty() log the inode
external to the function, yet this function is where the on-disk
format value is updated. Push the inode logging down into the
function itself to help prevent future mistakes.
Note that internal bmap callers track the inode logging flags
independently and thus may log the inode core twice due to this
change. This is harmless, so leave this code around for consistency
with the other attr fork conversion functions.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_attr_shortform_to_leaf() attempts to put the shortform fork back
together after a failed attempt to convert from shortform to leaf
format. While this code reallocates and copies back the shortform
attr fork data, it never resets the inode format field back to local
format. Further, now that the inode is properly logged after the
initial switch from local format, any error that triggers the
recovery code will eventually abort the transaction and shutdown the
fs. Therefore, remove the broken and unnecessary error handling
code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When a directory changes from shortform (sf) to block format, the sf
format is copied to a temporary buffer, the inode format is modified
and the updated format filled with the dentries from the temporary
buffer. If the inode format is modified and attempt to grow the
inode fails (due to I/O error, for example), it is possible to
return an error while leaving the directory in an inconsistent state
and with an otherwise clean transaction. This results in corruption
of the associated directory and leads to xfs_dabuf_map() errors as
subsequent lookups cannot accurately determine the format of the
directory. This problem is reproduced occasionally by generic/475.
The fundamental problem is that xfs_dir2_sf_to_block() changes the
on-disk inode format without logging the inode. The inode is
eventually logged by the bmapi layer in the common case, but error
checking introduces the possibility of failing the high level
request before this happens.
Update both of the dir2 and attr callers of
xfs_bmap_local_to_extents_empty() to log the inode core as
consistent with the bmap local to extent format change codepath.
This ensures that any subsequent errors after the format has changed
cause the transaction to abort.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We no longer need the extra mirror length tracking in the O_DIRECT code,
as we are able to track the maximum contiguous length in dreq->max_count.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a series of O_DIRECT reads or writes are truncated, either due to
eof or due to an error, then we should return the number of contiguous
bytes that were received/sent starting at the offset specified by the
application.
Currently, we are failing to correctly check contiguity, and so we're
failing the generic/465 in xfstests when the race between the read
and write RPCs causes the file to get extended while the 2 reads are
outstanding. If the first read RPC call wins the race and returns with
eof set, we should treat the second read RPC as being truncated.
Reported-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Fixes: 1ccbad9f9f ("nfs: fix DIO good bytes calculation")
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Mark inode for force revalidation if LOOKUP_REVAL flag is set.
This tells the client to actually send a QueryInfo request to
the server to obtain the latest metadata in case a directory
or a file were changed remotely. Only do that if the client
doesn't have a lease for the file to avoid unneeded round
trips to the server.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently the client indicates that a dentry is stale when inode
numbers or type types between a local inode and a remote file
don't match. If this is the case attributes is not being copied
from remote to local, so, it is already known that the local copy
has stale metadata. That's why the inode needs to be marked for
revalidation in order to tell the VFS to lookup the dentry again
before openning a file. This prevents unexpected stale errors
to be returned to the user space when openning a file.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes: cb7a69e605 ("cifs: Initialize filesystem timestamp ranges")
Only very old servers (e.g. OS/2 and DOS) did not support
DCE TIME (100 nanosecond granularity). Fix the checks used
to set minimum and maximum times.
Fixes xfstest generic/258 (on 5.4-rc1 and later)
CC: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Message was intended only for developer temporary build
In addition cleanup two minor warnings noticed by Coverity
and a trivial change to workaround a sparse warning
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
GCC throws warning message as below:
‘clone_src_i_size’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)
^
fs/btrfs/send.c:5088:6: note: ‘clone_src_i_size’ was declared here
u64 clone_src_i_size;
^
The clone_src_i_size is only used as call-by-reference
in a call to get_inode_info().
Silence the warning by initializing clone_src_i_size to 0.
Note that the warning is a false positive and reported by older versions
of GCC (eg. 7.x) but not eg 9.x. As there have been numerous people, the
patch is applied. Setting clone_src_i_size to 0 does not otherwise make
sense and would not do any action in case the code changes in the future.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Any changes interesting to tasks waiting in io_cqring_wait() are
commited with io_cqring_ev_posted(). However, io_ring_drop_ctx_refs()
also tries to do that but with no reason, that means spurious wakeups
every io_free_req() and io_uring_enter().
Just use percpu_ref_put() instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc fixes from Andrew Morton:
"The usual shower of hotfixes.
Chris's memcg patches aren't actually fixes - they're mature but a few
niggling review issues were late to arrive.
The ocfs2 fixes are quite old - those took some time to get reviewer
attention.
Subsystems affected by this patch series: ocfs2, hotfixes, mm/memcg,
mm/slab-generic"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two)
mm, sl[ou]b: improve memory accounting
mm, memcg: make scan aggression always exclude protection
mm, memcg: make memory.emin the baseline for utilisation determination
mm, memcg: proportional memory.{low,min} reclaim
mm/vmpressure.c: fix a signedness bug in vmpressure_register_event()
mm/page_alloc.c: fix a crash in free_pages_prepare()
mm/z3fold.c: claim page in the beginning of free
kernel/sysctl.c: do not override max_threads provided by userspace
memcg: only record foreign writebacks with dirty pages when memcg is not disabled
mm: fix -Wmissing-prototypes warnings
writeback: fix use-after-free in finish_writeback_work()
mm/memremap: drop unused SECTION_SIZE and SECTION_MASK
panic: ensure preemption is disabled during panic()
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc()
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock()
fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()
ocfs2: clear zero in unaligned direct IO
In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283
to check whether inode_alloc is NULL:
if (inode_alloc)
When inode_alloc is NULL, it is used on line 287:
ocfs2_inode_lock(inode_alloc, &bh, 0);
ocfs2_inode_lock_full_nested(inode, ...)
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
Thus, a possible null-pointer dereference may occur.
To fix this bug, inode_alloc is checked on line 286.
This bug is found by a static analysis tool STCheck written by us.
Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_write_end_nolock(), there are an if statement on lines 1976,
2047 and 2058, to check whether handle is NULL:
if (handle)
When handle is NULL, it is used on line 2045:
ocfs2_update_inode_fsync_trans(handle, inode, 1);
oi->i_sync_tid = handle->h_transaction->t_tid;
Thus, a possible null-pointer dereference may occur.
To fix this bug, handle is checked before calling
ocfs2_update_inode_fsync_trans().
This bug is found by a static analysis tool STCheck written by us.
Link: http://lkml.kernel.org/r/20190726033705.32307-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to
check whether loc->xl_entry is NULL:
if (loc->xl_entry)
When loc->xl_entry is NULL, it is used on line 2158:
ocfs2_xa_add_entry(loc, name_hash);
loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);
and line 2164:
ocfs2_xa_add_namevalue(loc, xi);
loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len);
loc->xl_entry->xe_name_len = xi->xi_name_len;
Thus, possible null-pointer dereferences may occur.
To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry()
abnormally returns with -EINVAL.
These bugs are found by a static analysis tool STCheck written by us.
[akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()]
Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unused portion of a part-written fs-block-sized block is not set to zero
in unaligned append direct write.This can lead to serious data
inconsistencies.
Ocfs2 manage disk with cluster size(for example, 1M), part-written in
one cluster will change the cluster state from UN-WRITTEN to WRITTEN,
VFS(function dio_zero_block) doesn't do the cleaning because bh's state
is not set to NEW in function ocfs2_dio_wr_get_block when we write a
WRITTEN cluster. For example, the cluster size is 1M, file size is 8k
and we direct write from 14k to 15k, then 12k~14k and 15k~16k will
contain dirty data.
We have to deal with two cases:
1.The starting position of direct write is outside the file.
2.The starting position of direct write is located in the file.
We need set bh's state to NEW in the first case. In the second case, we
need mapped twice because bh's state of area out file should be set to
NEW while area in file not.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/5292e287-8f1a-fd4a-1a14-661e555e0bed@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 9f79b78ef7 ("Convert filldir[64]() from __put_user() to
unsafe_put_user()") I made filldir() use unsafe_put_user(), which
improves code generation on x86 enormously.
But because we didn't have a "unsafe_copy_to_user()", the dirent name
copy was also done by hand with unsafe_put_user() in a loop, and it
turns out that a lot of other architectures didn't like that, because
unlike x86, they have various alignment issues.
Most non-x86 architectures trap and fix it up, and some (like xtensa)
will just fail unaligned put_user() accesses unconditionally. Which
makes that "copy using put_user() in a loop" not work for them at all.
I could make that code do explicit alignment etc, but the architectures
that don't like unaligned accesses also don't really use the fancy
"user_access_begin/end()" model, so they might just use the regular old
__copy_to_user() interface.
So this commit takes that looping implementation, turns it into the x86
version of "unsafe_copy_to_user()", and makes other architectures
implement the unsafe copy version as __copy_to_user() (the same way they
do for the other unsafe_xyz() accessor functions).
Note that it only does this for the copying _to_ user space, and we
still don't have a unsafe version of copy_from_user().
That's partly because we have no current users of it, but also partly
because the copy_from_user() case is slightly different and cannot
efficiently be implemented in terms of a unsafe_get_user() loop (because
gcc can't do asm goto with outputs).
It would be trivial to do this using "rep movsb", which would work
really nicely on newer x86 cores, but really badly on some older ones.
Al Viro is looking at cleaning up all our user copy routines to make
this all a non-issue, but for now we have this simple-but-stupid version
for x86 that works fine for the dirent name copy case because those
names are short strings and we simply don't need anything fancier.
Fixes: 9f79b78ef7 ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently if the client identifies problems when processing
metadata returned in CREATE response, the open handle is being
leaked. This causes multiple problems like a file missing a lease
break by that client which causes high latencies to other clients
accessing the file. Another side-effect of this is that the file
can't be deleted.
Fix this by closing the file after the client hits an error after
the file was opened and the open descriptor wasn't returned to
the user space. Also convert -ESTALE to -EOPENSTALE to allow
the VFS to revalidate a dentry and retry the open.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After 'Initial git repository build' commit,
'mapping_table_ERRHRD' variable has not been used.
So 'mapping_table_ERRHRD' const variable could be removed
to mute below warning message:
fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable]
static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
^
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that sparse has been fixed, it spotted a couple recent minor
endian errors (and removed one additional sparse warning).
Thanks to Luc Van Oostenryck for his help fixing sparse.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Guarantee zeroed memory buffers for cases where potential memory
leak to disk can occur. In these cases, kmem_alloc is used and
doesn't zero the buffer, opening the possibility of information
leakage to disk.
Use existing infrastucture (xfs_buf_allocate_memory) to obtain
the already zeroed buffer from kernel memory.
This solution avoids the performance issue that would occur if a
wholesale change to replace kmem_alloc with kmem_zalloc was done.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
[darrick: fix bitwise complaint about kmflag_mask]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Removed unused error variable. Instead of using error variable,
returned the value directly as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags arg is always passed as zero, so remove it.
(xfs_buf_get_uncached takes flags to support XBF_NO_IOACCT for
the sb, but that should never be relevant for xfs_get_aghdr_buf)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
To ensure that all blocks touched by the range [offset, offset + count)
are allocated, we need to calculate the block count from the difference
of the range end (rounded up) and the range start (rounded down).
Before this patch, we just round up the byte count, which may lead to
unaligned ranges not being fully allocated:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..7]: 1396264..1396271
1: [8..15]: hole
There should not be a hole there. Instead, the first two blocks should
be fully allocated.
With this patch applied, the result is something like this:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..15]: 11024..11039
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.
Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac74f ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases. But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.
Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case. End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.
Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.
This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.
Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.
It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.
Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.
In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac74f ("elf: enforce MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space. And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.
I really wanted to do this during the merge window, but didn't have
time. The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.
It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned. But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.
* branch 'readdir':
Make filldir[64]() verify the directory entry filename is valid
Convert filldir[64]() from __put_user() to unsafe_put_user()
This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().
This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.
There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.
There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption. It's really more
"protect user space from bad behavior" as pointed out by Jann. But
since Eric Biederman looked up the POSIX wording, here it is for context:
"From readdir:
The readdir() function shall return a pointer to a structure
representing the directory entry at the current position in the
directory stream specified by the argument dirp, and position the
directory stream at the next entry. It shall return a null pointer
upon reaching the end of the directory stream. The structure dirent
defined in the <dirent.h> header describes a directory entry.
From definitions:
3.129 Directory Entry (or Link)
An object that associates a filename with a file. Several directory
entries can associate names with the same file.
...
3.169 Filename
A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
characters composing the name may be selected from the set of all
character values excluding the slash character and the null byte. The
filenames dot and dot-dot have special meaning. A filename is
sometimes referred to as a 'pathname component'."
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.
We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')
See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.
Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.
Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.
So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface. Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.
This also makes the dirent name copy use unsafe_put_user() with a couple
of macros. We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.
Note that this doesn't bother with the legacy cases. Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=vKVl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Mandate timespec64 for the io_uring timeout ABI (Arnd)
- Set of NVMe changes via Sagi:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John
- Two s390 dasd fixes (Jan, Stefan)
- Have loop change block size in DIO mode (Martijn)
- paride pg header ifdef guard (Masahiro)
- Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
devices and suboptimal performance on others (Ming)
* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
block: sed-opal: fix sparse warning: convert __be64 data
block: sed-opal: fix sparse warning: obsolete array init.
block: pg: add header include guard
Revert "s390/dasd: Add discard support for ESE volumes"
s390/dasd: Fix error handling during online processing
io_uring: use __kernel_timespec in timeout ABI
loop: change queue block size to match when using DIO
blk-mq: apply normal plugging for HDD
blk-mq: honor IO scheduler for multiqueue devices
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
...
Today, put_compat_statfs64() disallows nearly any field value over
2^32 if f_bsize is only 32 bits, but that makes no sense.
compat_statfs64 is there for the explicit purpose of providing 64-bit
fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits.
As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file
counts even with -D_FILE_OFFSET_BITS=64 set.
In reality, only f_bsize and f_frsize can legitimately overflow
(fields like f_type and f_namelen should never be large), so test
only those fields.
This bug was discussed at length some time ago, and this is the proposal
Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get
dropped amid the discussion of other related changes, but this
part seems obviously correct on its own, so I've picked it up and
sent it, for expediency.
Fixes: 64d2ab32ef ("vfs: fix put_compat_statfs64() does not handle errors")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coverity caught a case where we could return with a uninitialized value
in ret in process_leaf. This is actually pretty likely because we could
very easily run into a block group item key and have a garbage value in
ret and think there was an errror. Fix this by initializing ret to 0.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: fd708b81d9 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the command:
btrfs balance start -dconvert=single,soft .
on a Raspberry Pi produces the following kernel message:
BTRFS error (device mmcblk0p2): balance: invalid convert data profile single
This fails because we use is_power_of_2(unsigned long) to validate
the new data profile, the constant for 'single' profile uses bit 48,
and there are only 32 bits in a long on ARM.
Fix by open-coding the check using u64 variables.
Tested by completing the original balance command on several Raspberry
Pis.
Fixes: 818255feec ("btrfs: use common helper instead of open coding a bit test")
CC: stable@vger.kernel.org # 4.20+
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read. Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.
The modification of the individual log root items are serialized on the
per-log root root_mutex. This means that any modification to the
per-subvol log root_item is completely protected.
However we update the root item in the log root tree outside of the log
root tree log_mutex. We do this in order to allow multiple subvolumes
to be updated in each log transaction.
This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information. Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.
This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at. Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.
Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree. This way we do not modify the
log_root_tree while we're committing it, fixing the problem.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have a buffered write that starts at an offset greater than or
equals to the file's size happening concurrently with a full ranged
fiemap, we can end up leaking an extent state structure.
Suppose we have a file with a size of 1Mb, and before the buffered write
and fiemap are performed, it has a single extent state in its io tree
representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set.
The following sequence diagram shows how the memory leak happens if a
fiemap a buffered write, starting at offset 1Mb and with a length of
4Kb, are performed concurrently.
CPU 1 CPU 2
extent_fiemap()
--> it's a full ranged fiemap
range from 0 to LLONG_MAX - 1
(9223372036854775807)
--> locks range in the inode's
io tree
--> after this we have 2 extent
states in the io tree:
--> 1 for range [0, 1Mb[ with
the bits EXTENT_LOCKED and
EXTENT_DELALLOC_BITS set
--> 1 for the range
[1Mb, LLONG_MAX[ with
the EXTENT_LOCKED bit set
--> start buffered write at offset
1Mb with a length of 4Kb
btrfs_file_write_iter()
btrfs_buffered_write()
--> cached_state is NULL
lock_and_cleanup_extent_if_need()
--> returns 0 and does not lock
range because it starts
at current i_size / eof
--> cached_state remains NULL
btrfs_dirty_pages()
btrfs_set_extent_delalloc()
(...)
__set_extent_bit()
--> splits extent state for range
[1Mb, LLONG_MAX[ and now we
have 2 extent states:
--> one for the range
[1Mb, 1Mb + 4Kb[ with
EXTENT_LOCKED set
--> another one for the range
[1Mb + 4Kb, LLONG_MAX[ with
EXTENT_LOCKED set as well
--> sets EXTENT_DELALLOC on the
extent state for the range
[1Mb, 1Mb + 4Kb[
--> caches extent state
[1Mb, 1Mb + 4Kb[ into
@cached_state because it has
the bit EXTENT_LOCKED set
--> btrfs_buffered_write() ends up
with a non-NULL cached_state and
never calls anything to release its
reference on it, resulting in a
memory leak
Fix this by calling free_extent_state() on cached_state if the range was
not locked by lock_and_cleanup_extent_if_need().
The same issue can happen if anything else other than fiemap locks a range
that covers eof and beyond.
This could be triggered, sporadically, by test case generic/561 from the
fstests suite, which makes duperemove run concurrently with fsstress, and
duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set
the leak is reported in dmesg/syslog when removing the btrfs module with
a message like the following:
[77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1
Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak.
CC: stable@vger.kernel.org # 4.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All system calls use struct __kernel_timespec instead of the old struct
timespec, but this one was just added with the old-style ABI. Change it
now to enforce the use of __kernel_timespec, avoiding ABI confusion and
the need for compat handlers on 32-bit architectures.
Any user space caller will have to use __kernel_timespec now, but this
is unambiguous and works for any C library regardless of the time_t
definition. A nicer way to specify the timeout would have been a less
ambiguous 64-bit nanosecond value, but I suppose it's too late now to
change that as this would impact both 32-bit and 64-bit users.
Fixes: 5262f56798 ("io_uring: IORING_OP_TIMEOUT support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a recent cleanup patch. noio (bypass) chain is
handled asynchronously against submit chain, therefore
inplace I/O or pagevec cannot be applied to such pages.
Add detailed comment for this as well.
Fixes: 97e86a858b ("staging: erofs: tidy up decompression frontend")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190922100434.229340-1-gaoxiang25@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
After doing more drop_caches stress test on
our products, I found the mistake introduced by
a very recent cleanup [1].
The current rule is that "erofs_get_meta_page"
should be returned with page locked (although
it's mostly unnecessary for read-only fs after
pages are PG_uptodate), but a fix should be
done for this.
[1] https://lore.kernel.org/r/20190904020912.63925-26-gaoxiang25@huawei.com
Fixes: 618f40ea02 ("erofs: use read_cache_page_gfp for erofs_get_meta_page")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190921184355.149928-1-gaoxiang25@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
In case of error, the function read_mapping_page() returns
ERR_PTR() not NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: fe7c242357 ("erofs: use read_mapping_page instead of sb_bread")
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20190918083033.47780-1-weiyongjun1@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Miklos Szeredi