Commit Graph

25 Commits

Author SHA1 Message Date
Vijaya Mohan Guvva 36ec9712d5 [SCSI] bfa: Fix bug_on condition in RPSC rsp handling
Fix bug_on condition check in RPSC (Report Port Speed Capabilities)
response processing.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26 16:47:36 -07:00
Vijaya Mohan Guvva bbe37a67d9 [SCSI] bfa: Support for FC BB credit recovery
This patch includes changes to  1) Enable/disable fc credit recovery on
Brocade FC adapter port operating at max supported speed. 2) Get credit
recovery status and stats related to credit loss and recovered credits

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26 11:40:12 -07:00
Vijay Mohan Guvva 07cdc0464f [SCSI] bfa: fix for FC Direct Attach LUN discovery failure
Resending the patch as it didn't make the linux-scsi list.

This patch fixes fcs rport state machine to address ocassional Brocade
FC Direct Attach LUN discovery failure due to not sending PLOGI accept
to the target.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04 11:16:27 -07:00
Krishna Gudipati 7ace27ae28 [SCSI] bfa: Add support for IO throttling at port level
Add capability to limit the number of exchanges on a port to
avoid queue-full conditions from the target side.

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@brocade.com>
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:21:29 +01:00
Krishna Gudipati bc0e2c2a97 [SCSI] bfa: Add support for FC Arbitrated Loop topology.
- Add private loop topology support at 2G/4G/8G speeds with following
  limitations
  1. No support for multiple initiators in the loop
  2. No public loop support. If attached to a loop with an FL_Port,
     device continues to work as a private NL_Port in the loop
  3. No auto topology detection. User has to manually set the
     configured topology to loop if attaching to loop.
- When loop topology is configured, enabling FC port features
  QoS/Trunk/TRL are not allowed and vice versa.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:03:50 +01:00
Krishna Gudipati 61ba43947e [SCSI] bfa: Add support for max target ports discovery
- Changes to avoid discovering NPIV port as remote port by the other
  NPIV ports created on same physical port when all the NPIV ports are
  part of the same zone in a fabric.
- Provided mechanism to support maximum number of target ports for a
  given initiator port (physical port + NPIV ports) irrespective of the
  way in which the initiator and target ports are zoned in the fabric.
- Introduced module_parameter max_rport_logins to restrict number of
  remote ports discovery which includes target and initiator remote ports.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24 12:10:57 +04:00
Krishna Gudipati c3f1b123d0 [SCSI] bfa: Make changes to FCXP resource management.
- Made changes to split FCXP resources as request and response resources.
- The split will reduce the contention for FCXP resources in an open zone
  config.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24 12:10:56 +04:00
Krishna Gudipati ee1a4a42f6 [SCSI] bfa: FCS remote port enhancements.
- Introduced rport qualifier structure and modified design to
  export remote ports with valid pid or valid pwwn to the user space.
- Introduced old_pid field in the rport structure and made changes to
  prevent re-creating a new remote port for an already existing rport
  that is transitioning to a delete state. (Happens if we receive a RSCN
  on the existing remote port that is getting deleted).

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24 12:10:56 +04:00
Krishna Gudipati bd5a026019 [SCSI] bfa: BSG and User interface fixes.
Made changes to set the rport maxfrsize param to use a value that is
equal to or less than the Buffer-to-Buffer Receive Data_Field size
specified in the Common Service Parameters.
Increased the diag memtest timeout for the Brocade-1860 adapters.
Made changes to enable valid port speed configuration check for all adapters.
Made changes to increase the max hw segments in a request, in order to
support larger data transfers from user space.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28 09:57:58 +01:00
Krishna Gudipati 7826f304b1 [SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.
- Added support to post vendor unique events on fc_host.
- Supports adapter, port, ioc, flash and remote port based AEN events.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27 14:41:24 +04:00
Krishna Gudipati 601380669b [SCSI] bfa: Extend BSG interface.
- Added support to collect driver/fw stats.
- Added support to perform adapter/ioc enable, disable operations.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 17:16:54 -05:00
Krishna Gudipati d7be54cc5c [SCSI] bfa: FCS bug fixes.
- Added logic to initiate a PLOGI to the target, while processing a LOGO
  from the same target in Direct attach mode.
- Added logic to generate a FCCT Reject indicating unsupported command,
  upon receiving FCCT/FCGS requests.
- Added logic to set the fcpim in offline state and avoid any PRLI retries
  if a PRLI response is a reject with a reason Command Not Supported.
- Updated the FDMI Supported/Current speeds.
- Added logic to wait for the response  from the firmware before sending
  ACC to PLOGI and transitioning to subsequent states - while processing an
  Incoming PLOGI in online state.
- Added a wait state in the fcs_vport state machine - For case where
  FDISC is in progress and we get a vport delete request we wait for
  fdisc response and will transition to the appropriate state based on
  rsp status, else its causing both driver/fw resources to be not
  freed.
- Remove the fc_credit_recovery module param.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 17:12:11 -05:00
Krishna Gudipati be540a991e [SCSI] bfa: FC credit recovery and misc bug fixes.
- Introduce FC credit recovery.
- Added module parameter to enable/disable credit recovery.

Bug Fixes:
- Removed check for ignoring plogi from initiator in switched fabric mode.
- The ABTS for PLOGI is going out few millisecs earlier due to FW
  timer calibration (around 300 miilisecs earlier). So there is a
  window if an accept comes during this time HBA would have initiated
  an ABORT.
- Added 1 to FC_ELS_TOV for compensating for FW timer.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 15:52:21 -05:00
Jing Huang d4b671c58e [SCSI] bfa: replace bfa_assert with WARN_ON
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-31 09:36:53 -06:00
Maggie Zhang da99dcc98d [SCSI] bfa: remove unused functions and misc cleanups
Remove unused functions and fix checkpatch errors. Misc cleanups in
comment and formatting.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:32:58 -06:00
Maggie Zhang f16a17507b [SCSI] bfa: remove all OS wrappers
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:32:56 -06:00
Maggie Zhang f7f73812e9 [SCSI] bfa: clean up one line functions
Cleaned up one line functions.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:32:43 -06:00
Maggie Zhang df0f1933eb [SCSI] bfa: remove unused and empty functions
Removed unused and empty functions.

Signed-off-by: Maggie Zhang <xmzhang@brocade.com>
Signed-off-by: Jing Huang <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:50 -06:00
Maggie 50444a3400 [SCSI] bfa: fix endianess sparse check warnings
First round of fix for the endianess check warnings from make C=2 CF="-D__CHECK_ENDIAN__".

Signed-off-by: Maggie <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:17 -06:00
Maggie 52f94b6fd0 [SCSI] bfa: fix regular sparse check warnings.
Fix all sparse check warnings from make C=2.

Signed-off-by: Maggie <xmzhang@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:16 -06:00
Jing Huang 8816624222 [SCSI] bfa: rename log_level to bfa_log_level
Rename log_level to bfa_log_level to make the global variable more bfa
specific and avoid clashes with other drivers which was causing a
build failure.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-20 12:28:34 -06:00
Jing Huang 5fbe25c7a6 [SCSI] bfa: fix comments for c files
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com)
regarding comment blocks that begining with "/**". bfa driver comments
currently do not follow kernel-doc convention, we hence replace all
/** with /* and **/ with */.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:28:09 -05:00
Jing Huang ba816ea8e2 [SCSI] bfa: replace endian swap macros with the ones provided by linux
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:17:14 -05:00
Jing Huang 6a18b1675f [SCSI] bfa: remove os wrapper and unused functions
This patch removes os wrapper and unused functions.
bfa_os_assign(), bfa_os_memset(), bfa_os_memcpy(), bfa_os_udelay()
bfa_os_vsprintf(), bfa_os_snprintf(), and bfa_os_get_clock() are replaced with
direct assignment or native linux functions. Some unused functions related to VF
(Vitual fabric) are also removed.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:15:58 -05:00
Krishna Gudipati a36c61f902 [SCSI] bfa: cleanup driver
We have flattened the BFA hierarchy and also reduced the number of
source and header files we used to have earlier.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16 22:54:24 -04:00