Commit Graph

266 Commits

Author SHA1 Message Date
Dave Airlie 8229c885fe drm: Merge tag 'v3.3-rc7' into drm-core-next
Merge the fixes so far into core-next, needed to test
intel driver.

Conflicts:
	drivers/gpu/drm/i915/intel_ringbuffer.c
2012-03-15 10:24:32 +00:00
Christian König 0be70439f2 drm/radeon: fix a semaphore deadlock on pre cayman asics
The out of order execution of semaphore commands on
pre cayman asics doesn't work correctly and can
cause deadlocks, so turn it off for now.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-07 14:07:29 +00:00
Alex Deucher f712812e1b drm/radeon/kms: make ring_start, ring_test, and ib_test per ring
Each ring type may need a different variant.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König<christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 10:14:47 +00:00
Alex Deucher 27cd77694b drm/radeon/kms: reorganize copy callbacks
tidy up the radeon_asic struct, handle multiple
rings better.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König<christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 10:14:14 +00:00
Christian König 442f7cfa04 drm/radeon/kms: no need to align IB like this
So don't confuse devs by doing so.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alex.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 10:10:53 +00:00
Jerome Glisse 6b7746e876 drm/radeon/kms: properly set accel working flag and bailout when false
If accel is not working many subsystem such as the ib pool might not be
initialized properly that can lead to segfault inside kernel when cs
ioctl is call with non working acceleration. To avoid this make sure
the accel working flag is false when an error in GPU startup happen and
return EBUSY from cs ioctl if accel is not working.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-22 10:30:02 +00:00
Jerome Glisse 69e130a6a4 drm/radeon: make ib size variable
This avoid to waste ib pool size and avoid a bunch of wait for
previous ib to finish.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05 10:03:33 +00:00
Jerome Glisse b15ba51207 drm/radeon: introduce a sub allocator and convert ib pool to it v4
Somewhat specializaed sub-allocator designed to perform sub-allocation
for command buffer not only for current cs ioctl but for future command
submission ioctl as well. Patch also convert current ib pool to use
the sub allocator. Idea is that ib poll buffer can be share with other
command buffer submission not having 64K granularity.

v2 Harmonize pool handling and add suspend/resume callback to pin/unpin
sa bo (tested on rv280, rv370, r420, rv515, rv610, rv710, redwood, cayman,
rs480, rs690, rs880)
v3 Simplify allocator
v4 Fix radeon_ib_get error path to properly free fence

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:52:12 +00:00
Alex Deucher 1b37078b7d drm/radeon/kms: add support for per-ring fence interrupts
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:52:03 +00:00
Alex Deucher 78c5560a08 drm/radeon/kms: add some new ring params to better handle other ring types
Some rptr/wptrs fields have different offsets and not all rings are pm4
so add a new nop field.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:51:46 +00:00
Jerome Glisse 30eb77f4e6 drm/radeon: precompute fence cpu/gpu addr once v3
Add a start fence driver helper function which will be call
once for each ring and will compute cpu/gpu addr for fence
depending on wether to use wb buffer or scratch reg.

This patch replace initialize fence driver separately which
was broken in regard of GPU lockup. The fence list for created,
emited, signaled must be initialize once and only from the
asic init callback not from the startup call back which is
call from the gpu reset.

v2: With this in place we no longer need to know the number of
    rings in fence_driver_init, also writing to the scratch reg
    before knowing its offset is a bad idea.

v3: rebase on top of change to previous patch in the serie

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:51:19 +00:00
Christian König af9720f490 drm/radeon: move ring debugfs into radeon_ring.c
Those debugfs files aren't r600 specific, so they
shouldn't be in r600.c. Move them to radeon_ring.c
and also add functionality to dump CP1 & CP2 ring
informations.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:51:04 +00:00
Christian König e32eb50dbe drm/radeon: rename struct radeon_cp to radeon_ring
That naming seems to make more sense, since we not
only want to run PM4 rings with it.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:50:56 +00:00
Christian König bf85279958 drm/radeon: make cp variable an array
Replace cp, cp1 and cp2 members with just an array
of radeon_cp structs.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:50:10 +00:00
Christian König 5596a9db15 drm/radeon: make ring rptr and wptr register offsets variable
Every ring seems to have the concept of read and
write pointers. Make the register offset variable
so we can use the functions for different types of rings.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:49:56 +00:00
Christian König 7b1f2485db drm/radeon: make all functions work with multiple rings.
Give all asic and radeon_ring_* functions a
radeon_cp parameter, so they know the ring to work with.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:49:46 +00:00
Christian König 15d3332f31 drm/radeon/kms: add support for semaphores v3
They are used to sync between rings, while fences
sync between a ring and the cpu.

v2 Fix radeon_semaphore_driver_fini when no semaphore were
allocated.

v3 Initialize list early on to avoid issue in case or early
error

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:49:36 +00:00
Alex Deucher 7465280c07 drm/radeon/kms: add support for multiple fence queues v2
For supporting multiple CP ring buffers, async DMA
engines and UVD.  We still need a way to synchronize
between engines.

v2 initialize unused fence driver ring to avoid issue in
   suspend/unload

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:49:28 +00:00
Alex Deucher bbe26ffe9f drm/radeon/kms: optimize r600_pm_profile_init
Avoid a lot of extra loops through the pm state array.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11 14:15:40 +00:00
Alex Deucher a4c9e2eed1 drm/radeon/kms/pm: add a proper pm profile init function for fusion
The new power tables need to be handled differently when setting
up the profiles.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11 14:15:37 +00:00
Linus Torvalds 83dbb15e9c Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits)
  vmwgfx: Snoop DMA transfers with non-covering sizes
  vmwgfx: Move the prefered mode first in the list
  vmwgfx: Unreference surface on cursor error path
  vmwgfx: Free prefered mode on error path
  vmwgfx: Use pointer return error codes
  vmwgfx: Fix hw cursor position
  vmwgfx: Infrastructure for explicit placement
  vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh
  vmwgfx: Remove screen object active list
  vmwgfx: Screen object cleanups
  drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2
  drm/radeon/kms: don't poll forever if MC GDDR link training fails
  drm/radeon/kms: fix DP setup on TRAVIS bridges
  drm/radeon/kms: set HPD polarity in hpd_init()
  drm/radeon/kms: add MSI module parameter
  drm/radeon/kms: Add MSI quirk for Dell RS690
  drm/radeon/kms: Add MSI quirk for HP RS690
  drm/radeon/kms: split MSI check into a separate function
  vmwgfx: Reinstate the update_layout ioctl
  drm/radeon/kms: always do extended edid probe
  ...
2011-11-07 10:01:56 -08:00
Jerome Glisse c9a1be9627 drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2
After GPU lockup VRAM gart table is unpinned and thus its pointer
becomes unvalid. This patch move the unpin code to a common helper
function and set pointer to NULL so that page update code can check
if it should update GPU page table or not. That way bo still bound
to GART can be unbound (pci_unmap_page for all there page) properly
while there is no need to update the GPU page table.

V2 move the test for null gart out of the loop, small optimization

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-04 10:39:51 +00:00
Alex Deucher 64912e997f drm/radeon/kms: set HPD polarity in hpd_init()
Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up in hpd_init() so first hotplug works
reliably no matter what is the initial set of connector. hpd_init()
also covers resume so HPD will work correctly after resume as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-03 17:53:18 +00:00
Alex Deucher 16cdf04d30 drm/radeon/kms: allocate vram scratch page on 6xx+
The vram scratch was originally only used on some 7xx asics
to work around a hw bug.  Allocate the scratch page on all 6xx+
radeons and set the MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR to point
to it.  We shouldn't ever hit it since we limit the system
aperture to vram or vram and AGP, but better safe than sorry.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-01 16:05:02 +00:00
Jerome Glisse 77b1bad423 drm/radeon: flush read cache for gtt with fence on r6xx and newer GPU V3
Cayman seems to be particularly sensitive to read cache returning
old data after bind/unbind to GTT. Flush read cache for GTT range
with each fences for all new hw. Should fix several rendering glitches.
Like

V2 flush whole address space
V3 also flush shader read cache

https://bugs.freedesktop.org/show_bug.cgi?id=40221
https://bugs.freedesktop.org/show_bug.cgi?id=38022
https://bugzilla.redhat.com/show_bug.cgi?id=738790

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-01 16:02:07 +00:00
Paul Gortmaker e0cd360813 gpu: add module.h to drivers/gpu files as required.
So that we don't get build failures once the implicit module.h
presence is removed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:03 -04:00
Dave Airlie 017ed8012e Merge tag 'v3.1-rc10' into drm-core-next
There are a number of fixes in mainline required for code in -next,
also there was a few conflicts I'd rather resolve myself.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Conflicts:
	drivers/gpu/drm/radeon/evergreen.c
	drivers/gpu/drm/radeon/r600.c
	drivers/gpu/drm/radeon/radeon_asic.h
2011-10-18 10:54:30 +01:00
Alex Deucher 6ddddfe734 drm/radeon/kms: make r600-NI blit suspend code common
r600-NI shared the same blit suspend code.  Clean it up
and make it a shared function.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18 10:12:51 +01:00
Alex Deucher 7dbf41db32 drm/radeon/kms: simplify r6xx blit code
Covert 4k pages to multiples of 64x64x4 tiles.
This is also more efficient than a scanline based
approach from the MC's perspective.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18 10:06:22 +01:00
Andi Kleen ce580fab73 drm/radeon: Move more code out of line
With this patch I'm only about 50k larger with DRM debugging
enables (why is that enabled by default?!?), and slightly
smaller without.

[airlied: moved r100.c additions to radeon_ring.c]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18 09:53:05 +01:00
Alex Deucher 003cefe0c2 drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2)
The BO blit code inconsistenly handled the page size.  This wasn't
an issue on system with 4k pages since the GPU's page size is 4k as
well.  Switch the driver blit callbacks to take num pages in GPU
page units.

Fixes lemote mipsel systems using AMD rs780/rs880 chipsets.

v2: incorporate suggestions from Michel.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-18 19:44:36 +01:00
Michel Dänzer 87463ff83b drm/radeon: Don't read from CP ring write pointer registers.
Apparently this doesn't always work reliably, e.g. at resume time.

Just initialize to 0, so the ring is considered empty.

Tested with hibernation on Sumo and Cayman cards.

Should fix https://bugs.launchpad.net/ubuntu/+source/linux/+bug/820746/ .

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14 13:35:35 +01:00
Tormod Volden fcf4de5acf drm/radeon: Print gart initialization details on all chipsets
This was previously done for r300 only. Use %016llX instead of %08X for
printing the table address.

Also fix typos in gart warning messages.

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-06 11:55:08 +01:00
Benjamin Herrenschmidt 964f664520 drm/radeon: Add a rmb() in IH processing
We should have a read memory barrier between reading the WPTR from
memory and reading ring entries based on that value (ie, we need to
ensure both loads are done in order by the CPU).

It could be argued that the MMIO reads in r600_ack_irq() might be
enough to get that barrier but I prefer keeping an explicit one just
in case.

[airlied: fix evergreen + r/w mixup]

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-25 12:42:39 +01:00
Benjamin Herrenschmidt f6a5693976 drm/radeon: Do an MMIO read on interrupts when not uisng MSIs
When not using MSIs, there is no guarantee that DMA from the device
has been fully flushed to point where it's visible to the CPU when
taking an interrupt. To get this guarantee, we need to perform an
MMIO read from the device, which will flush all outstanding DMAs
from bridges between the device and the system.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-25 12:16:25 +01:00
Benjamin Herrenschmidt df07d6999e drm/radeon: Writeback endian fixes
The writeback ring pointer and IH ring pointer are read using le32_to_cpu
so we do not want the chip to byteswap them on big-endian.

We still want to byteswap the ring itself and the IBs, so we don't touch
that but we remove setting of the byteswap bits in CP_RB_RPTR_ADDR and
IH_CNTL.

In general, for things like that where we control all the accessors easily,
we are better off doing the swap in SW rather than HW. Paradoxally, it does
keep the code closer to x86 and avoid using poorly tested HW features.

I also changed the use of RADEON_ to R600_ in a couple of cases to be more
consistent with the surrounding code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-25 12:14:56 +01:00
Alex Deucher e55b9422e1 drm/radeon/kms: add info query for backend map
The 3D driver need to get the pipe to backend
map to certain things.  Add a query to get the
info.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-18 08:13:08 +01:00
Jerome Glisse ccd6895d40 drm/radeon/kms: free ib pool on module unloading
ib pool weren't free for various newer asic on module unload.
This doesn't cause much arm but still could be candidate for
stable.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:48:27 +10:00
Alex Deucher a377e187df drm/radeon/kms/r6xx+: voltage fixes
0xff01 is not an actual voltage value, but a flag
for the driver.  If the power state as that value,
skip setting the voltage.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-21 09:38:25 +10:00
Dave Airlie 682f1a54a0 drm/radeon: avoid warnings from r600/eg irq handlers on powered off card.
Since we were calling the wptr function before checking if the IH was
even enabled, or the GPU wasn't shutdown, we'd get spam in the logs when
the GPU readback 0xffffffff. This reorders things so we return early
in the no IH and GPU shutdown cases.

Reported-and-tested-by: ManDay on #radeon
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20 12:01:43 +10:00
Ilija Hadzic 303c805cb4 drm/radeon: fix GUI idle IH debug statements
debug statement for GUI idle interrupt is wrong and incorrectly
reports CP EOP interrupt; trivial issue, but confusing for
someone trying to distinguish interrupt sources while debugging
... fixed

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09 14:36:48 +10:00
Alex Deucher d5c5a72f2a drm/radeon/kms: add support for Llano Fusion APUs
- add gpu init support
- add blit support
- add ucode loader

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02 10:47:40 +10:00
Cédric Cano 204ae24dc7 drm/radeon/kms: fix IH writeback on r6xx+ on big endian machines
agd5f: fix commit message.

Signed-off-by: Cedric Cano <ccano@interfaceconcept.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-20 10:45:21 +10:00
Alex Deucher 8a83ec5ee8 drm/radeon/kms: add voltage type to atom set voltage function
This is needed for setting voltages other than vddc.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:42 +10:00
Alex Deucher 92656d707e drm/radeon/kms: clean up gart dummy page handling
As per Konrad's original patch, the dummy page used
by the gart code and allocated in radeon_gart_init()
was not freed properly in radeon_gart_fini().

At the same time r6xx and newer allocated and freed the
dummy page on their own.  So to do Konrad's patch one
better, just remove the allocation and freeing of the
dummy page in the r6xx, 7xx, evergreen, and ni code and
allocate and free in the gart_init/fini() functions for
all asics.

Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:09:22 +10:00
Linus Torvalds e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Dave Airlie 38f1cff086 Merge commit '5359533801e3dd3abca5b7d3d985b0b33fd9fe8b' into drm-core-next
This commit changed an internal radeon structure, that meant a new driver
in -next had to be fixed up, merge in the commit and fix up the driver.

Also fixes a trivial nouveau merge.

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_mem.c
2011-03-16 11:34:41 +10:00
Dave Airlie 34db18abd3 Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-core-next
* 'intel/drm-intel-next' of ../drm-next: (755 commits)
  drm/i915: Only wait on a pending flip if we intend to write to the buffer
  drm/i915/dp: Sanity check eDP existence
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
  drm/i915: Don't save/restore hardware status page address register
  drm/i915: don't store the reg value for HWS_PGA
  drm/i915: fix memory corruption with GM965 and >4GB RAM
  Linux 2.6.38-rc7
  Revert "TPM: Long default timeout fix"
  drm/i915: Re-enable GPU semaphores for SandyBridge mobile
  drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#"
  Revert "drm/i915: Use PM QoS to prevent C-State starvation of gen3 GPU"
  drm/i915: Allow relocation deltas outside of target bo
  drm/i915: Silence an innocuous compiler warning for an unused variable
  fs/block_dev.c: fix new kernel-doc warning
  ACPI: Fix build for CONFIG_NET unset
  mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
  x86: Use u32 instead of long to set reset vector back to 0
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
2011-03-14 14:15:13 +10:00
Dave Airlie 5359533801 drm/radeon: fix problem with changing active VRAM size. (v2)
So we used to use lpfn directly to restrict VRAM when we couldn't
access the unmappable area, however this was removed in
93225b0d7b as it also restricted
the gtt placements. However it was only later noticed that this
broke on some hw.

This removes the active_vram_size, and just explicitly sets it
when it changes, TTM/drm_mm will always use the real_vram_size,
and the active vram size will change the TTM size used for lpfn
setting.

We should re-work the fpfn/lpfn to per-placement at some point
I suspect, but that is too late for this kernel.

Hopefully this addresses:
https://bugs.freedesktop.org/show_bug.cgi?id=35254

v2: fix reported useful VRAM size to userspace to be correct.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-14 12:51:04 +10:00
Alex Deucher 127278099f drm/radeon/kms: add support for cayman irqs
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-03 11:51:17 +10:00
Daniel Vetter 441921d530 drm/radeon: embed struct drm_gem_object
Unconditionally initialize the drm gem object - it's not
worth the trouble not to for the few kernel objects.

This patch only changes the place of the drm gem object,
access is still done via pointers.

v2: Uncoditionally align the size in radeon_bo_create. At
least the r600/evergreen blit code didn't to this, angering
the paranoid gem code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:33:03 +10:00
Paul Bolle ec4f2ac471 drm: Fix printk typo 'failled'
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 16:52:46 +01:00
Cédric Cano 4eace7fdfa drm/radeon/kms: 6xx/7xx big endian fixes
agd5f: minor cleanups

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14 09:23:38 +10:00
Alex Deucher 20d391d725 drm/radeon/kms: rv6xx+ thermal sensor fixes
Some fixes to the thermal sensor code:
- handle negative numbers
- properly handle temp calculation on different asics

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02 11:40:31 +10:00
Alex Deucher 8d96fe9381 drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics
Don't reset if the engine isn't busy.  This matches the behavior of
previous asics.  Reseting a non-hung block can lead to a hang.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33272

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24 11:05:25 +10:00
Alex Deucher fd909c3718 drm/radeon/kms: remove duplicate card_posted() functions
Use the common one for all asics.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17 12:21:38 +10:00
Alex Deucher d42dd579ac drm/radeon/kms: add module option for pcie gen2
Switching to pcie gen2 causes problems on some
boards.  Add a module option to turn it on/off.

There are gen2 compatability issues with some
motherboards it seems.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33027

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17 12:21:34 +10:00
Alex Deucher 9e46a48df2 drm/radeon/kms: add support for gen2 pcie link speeds
Supported on rv6xx/r7xx/evergreen.  Cards come up in gen1 mode.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:14 +10:00
Alex Deucher 3313e3d433 drm/radeon/kms: add pcie get/set lane support for r6xx/r7xx/evergreen
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:13 +10:00
Tejun Heo 32c87fca2f drm/radeon: use system_wq instead of dev_priv->wq
With cmwq, there's no reason for radeon to use a dedicated workqueue.
Drop dev_priv->wq and use system_wq instead.

Because radeon_driver_irq_uninstall_kms() may be called from
unsleepable context, the work items can't be flushed from there.
Instead, init and flush from radeon_irq_kms_init/fini().

While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work.
Always initialize and sync cancel instead of being unnecessarily smart
about it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06 14:32:16 +10:00
Dave Airlie 4f125010d2 Merge branch 'master' of /home/airlied/kernel/linux-2.6 into drm-core-next 2011-01-05 08:31:08 +10:00
Alex Deucher e29ff7290e drm/radeon/kms: fix bug in r600_gpu_is_lockup
We were using the lockup struct from the wrong union.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-22 08:30:57 +10:00
Chris Wilson d8c58fabd7 Merge remote branch 'airlied/drm-core-next' into drm-intel-next 2010-12-16 21:02:15 +00:00
Alex Deucher f3886f85cf drm/radeon/kms: don't apply 7xx HDP flush workaround on AGP
It should be required for all 7xx asics, but seems to cause
problems on some AGP 7xx chips.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=19002

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Reported-and-Tested-by: Duncan <1i5t5.duncan@cox.net>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-09 17:59:24 +10:00
Alex Deucher 8961d52d4c drm/radeon/kms: fix vram base calculation on rs780/rs880
Avoid overflowing a 32 bit value.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-08 09:35:05 +10:00
Dave Airlie f7eb0c5541 Merge branch 'drm-radeon-fusion' of ../drm-radeon-next into drm-core-next
* 'drm-radeon-fusion' of ../drm-radeon-next:
  drm/radeon/kms: add Ontario APU ucode loading support
  drm/radeon/kms: add Ontario Fusion APU pci ids
  drm/radeon/kms: enable MSIs on fusion APUs
  drm/radeon/kms: add power table parsing support for Ontario fusion APUs
  drm/radeon/kms: refactor atombios power state fetching
  drm/radeon/kms: add bo blit support for Ontario fusion APUs
  drm/radeon/kms: add thermal sensor support for fusion APUs
  drm/radeon/kms: fill in GPU init for AMD Ontario Fusion APUs
  drm/radeon/kms: add radeon_asic struct for AMD Ontario fusion APUs
  drm/radeon/kms: evergreen.c updates for fusion
  drm/radeon/kms: MC setup changes for fusion APUs
  drm/radeon/kms: move r7xx/evergreen to its own vram_gtt setup function
  drm/radeon/kms: add support for ss overrides on Fusion APUs
  drm/radeon/kms: Add support for external encoders on fusion APUs
  drm/radeon/kms: atom changes for DCE4.1 devices
  drm/radeon/kms: add new family id for AMD Ontario APUs
  drm/radeon/kms: upstream power table updates
  drm/radeon/kms: upstream atombios.h updates
  drm/radeon/kms: upstream ObjectID.h updates
  drm/radeon/kms: setup mc chremap properly on r7xx/evergreen
2010-12-03 14:01:08 +10:00
Alex Deucher 439bd6cde4 drm/radeon/kms: add Ontario APU ucode loading support
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23 09:23:35 +10:00
Alex Deucher 0ef0c1f734 drm/radeon/kms: move r7xx/evergreen to its own vram_gtt setup function
MC_VM_FB_LOCATION is at a different offset between r6xx and r7xx/evergreen.
The location is needed for vram setup on fusion chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23 09:23:23 +10:00
Mario Kleiner 3e4ea7421f drm/kms/radeon: Reorder vblank and pageflip interrupt handling.
In the vblank irq handler, calls to actual vblank handling,
or at least drm_handle_vblank(), need to happen before
calls to radeon_crtc_handle_flip().

Reason: The high precision pageflip timestamping
and some other pageflip optimizations will need the updated
vblank count and timestamps for the current vblank interval.

These are calculated in drm_handle_vblank(), therefore it
must go first.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 11:51:27 +10:00
Alex Deucher 6f34be50bd drm/radeon/kms: add pageflip ioctl support (v3)
This adds support for dri2 pageflipping.

v2: precision updates from Mario Kleiner.
v3: Multihead fixes from Mario Kleiner; missing crtc offset
    add note about update pending bit on pre-avivo chips

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22 11:51:08 +10:00
Alex Deucher 268b2510de drm/radeon/kms: fix alignment when allocating buffers
We were previously dropping alignment requests on the floor
when allocating buffers so we always ended up page aligned.
Certain tiling modes on 6xx+ require larger alignment which
wasn't happening before.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18 14:56:53 +10:00
Alex Deucher b2298fd271 drm/radeon/kms: fix thermal sensor reporting on rv6xx
Temperature is not shifted as on newer asics.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09 13:44:18 +10:00
Joe Perches fce7d61be0 drivers/gpu/drm: Update WARN uses
Coalesce long formats.
Align arguments.
Add missing newlines.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09 13:37:15 +10:00
Alex Deucher 881fe6c1d0 drm/radeon/kms: properly compute group_size on 6xx/7xx
Needed for tiled surfaces.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-26 14:47:54 +10:00
Dave Airlie b7ae5056c9 Merge branch 'drm-fixes' of /home/airlied/kernel/linux-2.6 into drm-core-next
Conflicts:
	drivers/gpu/drm/i915/intel_fb.c
	drivers/gpu/drm/radeon/r600_blit_kms.c
	drivers/gpu/drm/ttm/ttm_bo.c
2010-10-19 09:48:34 +10:00
Alex Deucher 3555e53b5b drm/radeon/kms: leave certain CP int bits enabled
These bits are used for internal communication and should
be left enabled.  This may fix s/r issues on some systems.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12 20:18:04 +10:00
Jerome Glisse c919b371cb drm/radeon/kms: avoid corner case issue with unmappable vram V2
We should not allocate any object into unmappable vram if we
have no means to access them which on all GPU means having the
CP running and on newer GPU having the blit utility working.

This patch limit the vram allocation to visible vram until
we have acceleration up and running.

Note that it's more than unlikely that we run into any issue
related to that as when acceleration is not woring userspace
should allocate any object in vram beside front buffer which
should fit in visible vram.

V2 use real_vram_size as mc_vram_size could be bigger than
   the actual amount of vram

[airlied: fixup r700_cp_stop case]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12 20:17:43 +10:00
Alex Deucher d0f8a854c3 drm/radeon/kms/r6xx+: use new style fencing (v3)
On r6xx+ a newer fence mechanism was implemented to replace
the old wait_until plus scratch regs setup.  A single EOP event
will flush the destination caches, write a fence value, and generate
an interrupt.  This is the recommended fence mechanism on r6xx+ asics.

This requires my previous writeback patch.

v2: fix typo that enabled event fence checking on all asics
rather than just r6xx+.

v3: properly enable EOP interrupts
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=29972

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:38:08 +10:00
Alex Deucher 724c80e1d6 drm/radeon/kms: enable writeback (v2)
When writeback is enabled, the GPU shadows writes to certain
registers into a buffer in memory.  The driver can then read
the values from the shadow rather than reading back from the
register across the bus.  Writeback can be disabled by setting
the no_wb module param to 1.

On r6xx/r7xx/evergreen, the following registers are shadowed:
- CP scratch registers
- CP read pointer
- IH write pointer
On r1xx-rr5xx, the following registers are shadowed:
- CP scratch registers
- CP read pointer

v2:
- Combine wb patches for r6xx-evergreen and r1xx-r5xx
- Writeback is disabled on AGP boards since it tends to be
unreliable on AGP using the gart.
- Check radeon_wb_init return values properly.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:38:08 +10:00
Alex Deucher b70d6bb3f6 drm/radeon/kms: clean up r6xx/r7xx blit init (v2)
Move common code to init function.

v2: make sure the bo is pinned after init as well.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:38:07 +10:00
Alex Deucher e488459a0e drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idle
radeon_gem_wait_idle_ioctl can apparently get called prior to
the vram page being set up or even if accel if false, so make
sure it's valid before using it.

Should fix:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636
https://bugs.freedesktop.org/show_bug.cgi?id=29834

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28 09:16:05 +10:00
Daniel J Blueman 4417d7f602 drm: radeon cleanup fixes...
Fix string interpreted as trigraph and typo.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:12:49 +10:00
Alex Deucher 7e7b41d2ff drm/radeon/kms/evergreen: fix gpu hangs in userspace accel code
These VGT regs need to be programmed via the ring rather than
MMIO as on previous asics (r6xx/r7xx).

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-07 08:00:35 +10:00
Alex Deucher 0b3b4fea0a drm/radeon/kms: remove useless clock code
This code was originally for forcing some clocks on certain asics.
However, this code was later moved to asic specific functions
for all of the affected asics.  The only users of the original
code at this point were r600, rv770, and evergreen and the code
was not relevant for those asics.  So, remove it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02 11:28:52 +10:00
Alex Deucher 87cbf8f2c5 drm/radeon/kms: fix a regression on r7xx AGP due to the HDP flush fix
commit: 812d046915
drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush
breaks on AGP boards since there is no VRAM gart table.

This patch fixes the issue by creating a VRAM scratch page so that
can be used on both AGP and PCIE.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29834

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30 09:51:57 +10:00
Dave Airlie d9fdaafbe9 drm/radeon/kms: move a bunch of modesetting debug to correct debug usage.
This migrates a bunch of DRM_DEBUG->DRM_DEBUG_KMS so we can get more modesetting related info without all the other ioctl handling easily.

Also the PM code moves to DRM_DEBUG_DRIVER mostly.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:47:07 +10:00
Alex Deucher 812d046915 drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations.  Add workaround.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:06:18 +10:00
Dave Airlie d656ae53f6 Merge tag 'v2.6.35-rc6' into drm-radeon-next
Need this to avoid conflicts with future radeon fixes
2010-08-02 10:05:24 +10:00
Alex Deucher e7aeeba6a8 drm/radeon/kms/r6xx+: add query for tile config (v2)
Userspace needs this information to access tiled
buffers via the CPU.

v2: rebased on evergreen accel changes

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:00:05 +10:00
Alex Deucher 21a8122ad3 drm/radeon/kms: add support for internal thermal sensors (v3)
rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:00:00 +10:00
Alex Deucher 8d369bb196 drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics
The asics in question have the following requirements with regard to
their gart setups:

1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31
2. The GART aperture MC base has to be aligned to a boundary equal to the size of the
aperture.
3. The GART page table has to be aligned to the boundary equal to the size of the table.
4. The GART page table size is: table_entry_size * (aperture_size / page_size)
5. The GART page table has to be allocated in non-paged, non-cached, contiguous system
memory.

This patch takes care 2.  The rest should already be handled properly.

This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com>

Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-16 11:27:01 +10:00
Dave Airlie db8cc27b80 Merge branch 'drm-platform' into drm-testing
* drm-platform:
  drm: Make sure the DRM offset matches the CPU
  drm: Add __arm defines to DRM
  drm: Add support for platform devices to register as DRM devices
  drm: Remove drm_resource wrappers
2010-07-07 18:37:35 +10:00
Alex Deucher 773c3fa3a0 drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28745

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01 11:59:46 +10:00
Alex Deucher f892034a8c drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)
Some IGP systems specify the system memory clock in the Firmware
table rather than the IGP info table.  Check both and make sure
we have a value system memory clock value.

v2: make sure rs690_pm_info is called on rs780/rs880 as well.

fixes a regression since 07d4190327b02ab3aaad25a2d168f79d92e8f8c2.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01 11:59:42 +10:00
Jerome Glisse 46fcd2b3db drm/radeon/kms: Force HDP_NONSURF to maximum size
HDP non surface should cover the whole VRAM but we were misscomputing
the size and we endup in some case not covering the VRAM at all (if
VRAM size were > 1G). Covering more than the VRAM size shouldn't be
an issue.

Fix : https://bugs.freedesktop.org/show_bug.cgi?id=28016

[airlied: add evergreen fix]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01 11:59:33 +10:00
Rafał Miłecki 0fcbe9473a drm/radeon/kms: add trivial debugging for voltage
agd5f: rebased

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:36:09 +10:00
Rafał Miłecki a081a9d6f5 drm/radeon/kms/r600+: use voltage from requested clock mode (v3)
This fixes FDO bug #28375, it's kind of regression, so quite important to have
it for .35.

V2: Fix on RV770+ as well. All other chipsets have only one clock mode per
state.

V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen.

agd5f: rebased

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:36:03 +10:00
Alex Deucher 4d60173fc1 drm/radeon/kms/pm: track current voltage (v2)
track the current voltage level and avoid setting it
if the requested voltage is already set.

v2: check voltage type before checking current voltage

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:53 +10:00
Alex Deucher c9e75b2125 drm/radeon/kms/pm: add mid profile
This adds an additional profile, mid, to the pm profile
code which takes the place of the old low profile.  The default
behavior remains the same, e.g., auto profile now selects between
mid and high profiles based on power source, however, you can now
manually force the low profile which was previously only available
as a dpms off state.  Enabling the low profile when the displays
are on has been known to cause display corruption in some cases.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:19 +10:00
Alex Deucher 7ac9aa5a1f drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
- This enables voltage adjustment on r6xx+ and certain
r5xx asics.
- Voltage drop support is already available for most
r1xx-r5xx asics.

V2: endian fix for voltage table.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:24 +10:00