Commit Graph

3403 Commits

Author SHA1 Message Date
Linus Torvalds 45763bf4bc Char/Misc driver patches for 5.1-rc1
Here is the big char/misc driver patch pull request for 5.1-rc1.
 
 The largest thing by far is the new habanalabs driver for their AI
 accelerator chip.  For now it is in the drivers/misc directory but will
 probably move to a new directory soon along with other drivers of this
 type.
 
 Other than that, just the usual set of individual driver updates and
 fixes.  There's an "odd" merge in here from the DRM tree that they asked
 me to do as the MEI driver is starting to interact with the i915 driver,
 and it needed some coordination.  All of those patches have been
 properly acked by the relevant subsystem maintainers.
 
 All of these have been in linux-next with no reported issues, most for
 quite some time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
 9e3l7H76oe33o96Qjhor
 =8A2k
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...
2019-03-06 14:18:59 -08:00
Christian Oder b98dc493e7 platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
Add  touchscreen info for the CHUWUI Hi10 Air tablet.

Signed-off-by: Christian Oder <me@myself5.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-03-05 15:51:20 +02:00
Kai-Heng Feng faf9650130 platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
This platform doesn't have hardware switch for rfkill, so add it to
no_hw_rfkill list to prevent wireless gets hard-blocked.

BugLink: https://bugs.launchpad.net/bugs/1818204
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-03-05 15:51:20 +02:00
Hugo Trovao 67133c6d99 platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
Lenovo Yoga C930 does not have a physical hw radio switch which
makes ideapad_laptop to incorrectly disable radio while it should
be working fine.  Adding it to the no_hw_rfkill_list makes
wireless available again without having to unload the module.

Signed-off-by: Hugo Trovao <htrovao@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-03-05 12:44:47 +02:00
Arnd Bergmann 2794449576 platform/chrome: fix wilco-ec dependencies
When CROS_EC_LPC is set to =m, we get a link failure for a
builtin wilco-ec module:

drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_remove':
core.c:(.text+0x26): undefined reference to `cros_ec_lpc_mec_destroy'
drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_probe':
core.c:(.text+0x18c): undefined reference to `cros_ec_lpc_mec_init'
core.c:(.text+0x224): undefined reference to `cros_ec_lpc_mec_destroy'
drivers/platform/chrome/wilco_ec/mailbox.o: In function `wilco_ec_mailbox':
mailbox.c:(.text+0x104): undefined reference to `cros_ec_lpc_io_bytes_mec'

The problem with the existing CROS_EC_LPC_MEC dependency is that this
is only for a 'bool' symbol, so the information about the exported
functions being in a module is lost on the way, and we actually have
to depend on both CROS_EC_LPC and CROS_EC_LPC_MEC.

Fixes: 7b3d4f44ab ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-03-05 11:35:46 +01:00
Rafael J. Wysocki 7db52b5ace Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20190215
  ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
  ACPICA: ACPI 6.3: add GTDT Revision 3 support
  ACPICA: ACPI 6.3: HMAT updates
  ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
  ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
  ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
  ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
  ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
  ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
  ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
  ACPICA: Update/clarify messages for control method failures
  ACPICA: Debugger: Fix possible fault with the "test objects" command
  ACPICA: Interpreter: Emit warning for creation of a zero-length op region
  ACPICA: Remove legacy module-level code support
  ACPICA: Get rid of acpi_sleep_dispatch()
  ACPICA: Update version to 20190108
  ACPICA: All acpica: Update copyrights to 2019
  ACPICA: acpiexec: Add option to dump extra info for memory leaks
  ACPICA: Convert more ACPI errors to firmware errors
2019-03-04 11:15:30 +01:00
Erik Schmauss c163f90cc8 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:01 +01:00
Rajneesh Bhardwaj 238f9c1135 platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
On some platforms such as HP Elite-x2-1013-g3, the platform BIOS
enforces XTAL to remain off before S0ix state can be achieved. This may
not be optimum when we want to enable use cases like Low Power Audio,
Wake on Voice etc which always need 24mhz clock.

This introduces a new quirk to allow S0ix entry when all other
conditions except for XTAL clock are good on a given platform. The extra
power consumed by XTAL clock is about 2mw but it saves much more
platform power compared to the system that remains in just PC10.

Link: https://bit.ly/2UmnrFf
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201579
Tested-by: "David E. Box" <david.e.box@linux.intel.com>
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:21:22 -08:00
Rajneesh Bhardwaj 8aba056a4e platform/x86: intel_pmc_core: Add Package cstates residency info
This patch introduces a new debugfs entry to read current Package
cstate residency counters. A similar variant of this patch was discussed
earlier "https://patchwork.kernel.org/patch/9908563/" but didn't make it
into mainline for various reasons. Current version only adds debugfs
entry which is quite useful for S0ix debug but excludes the exported API
that was there in initial version. Though there are tools like turbostat
and socwatch which can also show this info but sometimes its more
practical to have it here as it's hard to switch between various tools for
S0ix debug when pmc_core driver is the primary debug tool. Internal and
external customers have requested for this patch to be included in the
PMC driver on many occasions and Google Chrome OS team has already included
it in their builds. This becomes handy when requesting logs from external
customers who may not always have above mentioned tools in their integrated
kernel builds.

Package cstate residency MSRs provide useful debug information about
system idle states. In idle states system must enter deeper Package
cstates. Package cstates depend not only on Core cstates but also on
various IP block's power gating status and LTR values.

For Intel Core SoCs Package C10 entry is a must for deeper sleep states
such as S0ix. "Suspend-to-idle"  should ideally take this path:
PC0 -> PC10 -> S0ix. For S0ix debug, its logical to check for
Package C10 residency first if for some reason system fails to enter S0ix.

Please refer to this link for MSR details:
https://software.intel.com/sites/default/files/managed/22/0d/335592-sdm-vol-4.pdf

Usage:
cat /sys/kernel/debug/pmc_core/package_cstate_show
Package C2       : 0xec2e21735f
Package C3       : 0xc30113ba4
Package C6       : 0x9ef4be15c5
Package C7       : 0x1e011904
Package C8       : 0x3c5653cfe5a
Package C9       : 0x0
Package C10      : 0x16fff4289

Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:21:16 -08:00
Rajneesh Bhardwaj 6769fdbe27 platform/x86: intel_pmc_core: Add ICL platform support
Icelake can resue most of the CNL PCH IPs as they are mostly similar.
This patch enables the PMC Core driver for ICL family.

It also addresses few other minor issues like upper case conversions and
some tab alignments.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:21:13 -08:00
Rajneesh Bhardwaj cfb55af9ad platform/x86: intel_pmc_core: Convert to INTEL_CPU_FAM6 macro
INTEL_CPU_FAM6() macro provides better abstraction and reduces code size
so use it instead of custom grown ICPU().

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:21:10 -08:00
Rajat Jain 4a5861f714 platform/x86: intel_pmc_core: Avoid a u32 overflow
The register (SLP_S0_RES) at offset slp_s0_offset is a 32 bit register.
The pmc_core_adjust_slp_s0_step() could overflow the u32 value while
returning it after adjusting the step. Thus change to u64, this is
already accounted for in debugfs attribute (that wants to output a
64 bit value).

Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:21:02 -08:00
Christoph Hellwig f27e1d1826 platform/x86: dell_rbu: fix lock imbalance in img_update_realloc
We need to ensure rbu_data.lock is always held on return.

Fixes: 289790a3ea94 ("platform/x86: dell_rbu: stop abusing the DMA API")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:56 -08:00
Mark Levedahl b753185973 platform/x86: ideapad-laptop: Add Y530-I5ICH-1060 to no_hw_rfkill list
Commit 0252894f53 added the Legion Y530 to the no_hw_rfkill
list, but missed a Y530 variant using the nvidia 1060 graphics card.
I have had to blacklist ideapad-laptop as a result to get Wi-Fi working.

dmidecode info:

Handle 0x0001, DMI type 1, 27 bytes
System Information
    Manufacturer: LENOVO
    Product Name: 81LB
    Version: Lenovo Legion Y530-15ICH-1060
    Serial Number: <snip>
    UUID: <snip>
    Wake-up Type: Power Switch
    SKU Number: LENOVO_MT_81LB_BU_idea_FM_Legion Y530-15ICH-1060
    Family: Legion Y530-15ICH-1060

Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:49 -08:00
Vadim Pasternak e4c275f776 platform/mellanox: mlxreg-hotplug: Fix KASAN warning
Fix the following KASAN warning produced when booting a 64-bit kernel:
[   13.334750] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
[   13.342166] Read of size 8 at addr ffff880235067178 by task kworker/2:1/42
[   13.342176] CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 4.20.0-rc1+ #106
[   13.342179] Hardware name: Mellanox Technologies Ltd. MSN2740/Mellanox x86 SFF board, BIOS 5.6.5 06/07/2016
[   13.342190] Workqueue: events deferred_probe_work_func
[   13.342194] Call Trace:
[   13.342206]  dump_stack+0xc7/0x15b
[   13.342214]  ? show_regs_print_info+0x5/0x5
[   13.342220]  ? kmsg_dump_rewind_nolock+0x59/0x59
[   13.342234]  ? _raw_write_lock_irqsave+0x100/0x100
[   13.351593]  print_address_description+0x73/0x260
[   13.351603]  kasan_report+0x260/0x380
[   13.351611]  ? find_first_bit+0x19/0x70
[   13.351619]  find_first_bit+0x19/0x70
[   13.351630]  mlxreg_hotplug_work_handler+0x73c/0x920 [mlxreg_hotplug]
[   13.351639]  ? __lock_text_start+0x8/0x8
[   13.351646]  ? _raw_write_lock_irqsave+0x80/0x100
[   13.351656]  ? mlxreg_hotplug_remove+0x1e0/0x1e0 [mlxreg_hotplug]
[   13.351663]  ? regmap_volatile+0x40/0xb0
[   13.351668]  ? regcache_write+0x4c/0x90
[   13.351676]  ? mlxplat_mlxcpld_reg_write+0x24/0x30 [mlx_platform]
[   13.351681]  ? _regmap_write+0xea/0x220
[   13.351688]  ? __mutex_lock_slowpath+0x10/0x10
[   13.351696]  ? devm_add_action+0x70/0x70
[   13.351701]  ? mutex_unlock+0x1d/0x40
[   13.351710]  mlxreg_hotplug_probe+0x82e/0x989 [mlxreg_hotplug]
[   13.351723]  ? mlxreg_hotplug_work_handler+0x920/0x920 [mlxreg_hotplug]
[   13.351731]  ? sysfs_do_create_link_sd.isra.2+0xf4/0x190
[   13.351737]  ? sysfs_rename_link_ns+0xf0/0xf0
[   13.351743]  ? devres_close_group+0x2b0/0x2b0
[   13.351749]  ? pinctrl_put+0x20/0x20
[   13.351755]  ? acpi_dev_pm_attach+0x2c/0xd0
[   13.351763]  platform_drv_probe+0x70/0xd0
[   13.351771]  really_probe+0x480/0x6e0
[   13.351778]  ? device_attach+0x10/0x10
[   13.351784]  ? __lock_text_start+0x8/0x8
[   13.351790]  ? _raw_write_lock_irqsave+0x80/0x100
[   13.351797]  ? _raw_write_lock_irqsave+0x80/0x100
[   13.351806]  ? __driver_attach+0x190/0x190
[   13.351812]  driver_probe_device+0x17d/0x1a0
[   13.351819]  ? __driver_attach+0x190/0x190
[   13.351825]  bus_for_each_drv+0xd6/0x130
[   13.351831]  ? bus_rescan_devices+0x20/0x20
[   13.351837]  ? __mutex_lock_slowpath+0x10/0x10
[   13.351845]  __device_attach+0x18c/0x230
[   13.351852]  ? device_bind_driver+0x70/0x70
[   13.351859]  ? __mutex_lock_slowpath+0x10/0x10
[   13.351866]  bus_probe_device+0xea/0x110
[   13.351874]  deferred_probe_work_func+0x1c9/0x290
[   13.351882]  ? driver_deferred_probe_add+0x1d0/0x1d0
[   13.351889]  ? preempt_notifier_dec+0x20/0x20
[   13.351897]  ? read_word_at_a_time+0xe/0x20
[   13.351904]  ? strscpy+0x151/0x290
[   13.351912]  ? set_work_pool_and_clear_pending+0x9c/0xf0
[   13.351918]  ? __switch_to_asm+0x34/0x70
[   13.351924]  ? __switch_to_asm+0x40/0x70
[   13.351929]  ? __switch_to_asm+0x34/0x70
[   13.351935]  ? __switch_to_asm+0x40/0x70
[   13.351942]  process_one_work+0x5cc/0xa00
[   13.351952]  ? pwq_dec_nr_in_flight+0x1e0/0x1e0
[   13.351960]  ? pci_mmcfg_check_reserved+0x80/0xb8
[   13.351967]  ? run_rebalance_domains+0x250/0x250
[   13.351980]  ? stack_access_ok+0x35/0x80
[   13.351986]  ? deref_stack_reg+0xa1/0xe0
[   13.351994]  ? schedule+0xcd/0x250
[   13.352000]  ? worker_enter_idle+0x2d6/0x330
[   13.352006]  ? __schedule+0xeb0/0xeb0
[   13.352014]  ? fork_usermode_blob+0x130/0x130
[   13.352019]  ? mutex_lock+0xa7/0x100
[   13.352026]  ? _raw_spin_lock_irq+0x98/0xf0
[   13.352032]  ? _raw_read_unlock_irqrestore+0x30/0x30
[   13.352037] i2c i2c-2: Added multiplexed i2c bus 11
[   13.352043]  worker_thread+0x181/0xa80
[   13.352052]  ? __switch_to_asm+0x34/0x70
[   13.352058]  ? __switch_to_asm+0x40/0x70
[   13.352064]  ? process_one_work+0xa00/0xa00
[   13.352070]  ? __switch_to_asm+0x34/0x70
[   13.352076]  ? __switch_to_asm+0x40/0x70
[   13.352081]  ? __switch_to_asm+0x34/0x70
[   13.352086]  ? __switch_to_asm+0x40/0x70
[   13.352092]  ? __switch_to_asm+0x34/0x70
[   13.352097]  ? __switch_to_asm+0x40/0x70
[   13.352105]  ? __schedule+0x3d6/0xeb0
[   13.352112]  ? migrate_swap_stop+0x470/0x470
[   13.352119]  ? save_stack+0x89/0xb0
[   13.352127]  ? kmem_cache_alloc_trace+0xe5/0x570
[   13.352132]  ? kthread+0x59/0x1d0
[   13.352138]  ? ret_from_fork+0x35/0x40
[   13.352154]  ? __schedule+0xeb0/0xeb0
[   13.352161]  ? remove_wait_queue+0x150/0x150
[   13.352169]  ? _raw_write_lock_irqsave+0x80/0x100
[   13.352175]  ? __lock_text_start+0x8/0x8
[   13.352183]  ? process_one_work+0xa00/0xa00
[   13.352188]  kthread+0x1a4/0x1d0
[   13.352195]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[   13.352202]  ret_from_fork+0x35/0x40

[   13.353879] The buggy address belongs to the page:
[   13.353885] page:ffffea0008d419c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[   13.353890] flags: 0x2ffff8000000000()
[   13.353897] raw: 02ffff8000000000 ffffea0008d419c8 ffffea0008d419c8 0000000000000000
[   13.353903] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[   13.353905] page dumped because: kasan: bad access detected

[   13.353908] Memory state around the buggy address:
[   13.353912]  ffff880235067000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.353917]  ffff880235067080: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04
[   13.353921] >ffff880235067100: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 f2 f2 f2 f2 04
[   13.353923]                                                                 ^
[   13.353927]  ffff880235067180: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 00 00 00 00 00
[   13.353931]  ffff880235067200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   13.353933] ==================================================================

The warning is caused by the below loop:
	for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
while "asserted" is declared as 'unsigned'.

The casting of 32-bit unsigned integer pointer to a 64-bit unsigned long
pointer. There are two problems here.
It causes the access of four extra byte, which can corrupt memory
The 32-bit pointer address may not be 64-bit aligned.

The fix changes variable "asserted" to "unsigned long".

Fixes: 1f976f6978 ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:32 -08:00
Mattias Jacobsson c355ec651a platform/x86: wmi: fix potential null pointer dereference
In the function wmi_dev_match() the variable id is dereferenced without
first performing a NULL check. The variable can for example be NULL if
a WMI driver is registered without specifying the id_table field in
struct wmi_driver.

Add a NULL check and return that the driver can't handle the device if
the variable is NULL.

Fixes: 844af950da ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:29 -08:00
Christoph Hellwig fd47a36fba platform/x86: dell_rbu: stop abusing the DMA API
For some odd reason dell_rbu actually seems to want the physical and
not a bus address for the allocated buffer.  Lets assume that actually
is correct given that it is BIOS-related and that is a good source
of insanity.  In that case we should not use dma_alloc_coherent with
a NULL device to allocate memory, but use GFP_DMA32 to stay under
the 32-bit BIOS limit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:25 -08:00
Yang Fan 4d9b2864a4 platform/x86: ideapad-laptop: Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
Commit ae7c8cba32 ("platform/x86: ideapad-laptop: add lenovo RESCUER
R720-15IKBN to no_hw_rfkill_list") added
    DMI_MATCH(DMI_BOARD_NAME, "80WW")
for Lenovo RESCUER R720-15IKBN.

But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN,
thus cause Wireless LAN still be hard blocked.

On Lenovo RESCUER R720-15IKBN:
    ~$ cat /sys/class/dmi/id/sys_vendor
    LENOVO
    ~$ cat /sys/class/dmi/id/board_name
    Provence-5R3
    ~$ cat /sys/class/dmi/id/product_name
    80WW
    ~$ cat /sys/class/dmi/id/product_version
    Lenovo R720-15IKBN

So on Lenovo RESCUER R720-15IKBN:
    DMI_SYS_VENDOR should match "LENOVO",
    DMI_BOARD_NAME should match "Provence-5R3",
    DMI_PRODUCT_NAME should match "80WW",
    DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN".

Fix it, and in according with other entries in no_hw_rfkill_list,
use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME.

Fixes: ae7c8cba32 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list")
Signed-off-by: Yang Fan <nullptr.cpp@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:20 -08:00
Hans de Goede c994611aca platform/x86: asus-wmi: Allow loading on systems without the Asus Management GUID
hid-asus depends on asus-wmi through the asus_wmi_evaluate_method. Before
this commit asus-wmi, and thus hid-asus, could not be loaded on non-Asus
systems. This breaks using Asus bluetooth keyboards such as the Asus
T100CHI keyboard with non Asus systems.

This commit fixes this by allowing asus-wmi to load on systems without the
Asus Management GUID.

This is safe to do since all asus-wmi sub drivers use
asus_wmi_register_driver which also checks for the GUID.

This commit also improves the error messages in asus_wmi_register_driver
to include "ASUS" in their description to make them more clear. This is
important since we now rely on those errors when loaded on systems without
the Asus Management GUID.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:14 -08:00
Enrico Weigelt, metux IT consult f8eb0235f6 x86: pcengines apuv2 gpio/leds/keys platform driver
Driver for PCengines APUv2 board's front LEDs and Button,
which are attached to AMD PCH GPIOs. Due to lack of dedicated
ACPI entry, detecting the board via DMI.

Cc: linux-gpio@vger.kernel.org
Cc: linus.walleij@linaro.org
Cc: bgolaszewski@baylibre.com
Cc: dvhart@infradead.org
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22 17:28:08 +01:00
Nick Crews 0d2f2a3da1 platform/chrome: wilco_ec: Add RTC driver
This Embedded Controller has an internal RTC that is exposed
as a standard RTC class driver with read/write functionality.

The driver is added to the drivers/rtc/ so that the maintainer of that
directory will be able to comment on this change, as that maintainer is
the expert on this system. In addition, the driver code is called
indirectly after a corresponding device is registered from core.c,
as opposed to core.c registering the driver callbacks directly.

To test:
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00

> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21 21:36:53 +01:00
Nick Crews b787bb126c platform/chrome: wilco_ec: Add support for raw commands in debugfs
Add a debugfs attribute that allows sending raw commands to the EC.
This is useful for development and debug but should not be enabled
in a production environment.

To test:
Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00  .12/21/18.......

Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00  .12/21/18.......

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix off-by-one error in wilco_ec/debugfs.c]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21 21:36:21 +01:00
Nick Crews 7b3d4f44ab platform/chrome: Add new driver for Wilco EC
This EC is an incompatible variant of the typical Chrome OS embedded
controller.  It uses the same low-level communication and a similar
protocol with some significant differences.  The EC firmware does
not support the same mailbox commands so it is not registered as a
cros_ec device type.  This commit exports the wilco_ec_mailbox()
function so that other modules can use it to communicate with the EC.

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix the sparse warning: symbol 'wilco_ec_transfer' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[Fix Kconfig dependencies for wilco_ec]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21 21:35:59 +01:00
Rajneesh Bhardwaj 2a13096ac7 platform/x86: intel_pmc_core: Include Reserved IP for LTR
Recently introduced commit "platform/x86: intel_pmc_core: Show Latency
Tolerance info <51337cd94d18184601ac0fb4cf1a02b8bbabc3d7> skipped the
LTR from a reserved IP. Though this doesn't cause any functional issue
but it is needed for the consumers of "ltr_ignore" as the index printing
for "ltr_show" is missing. For example, w/o this change, a user that wants
to ignore LTR from ME would do something like

echo 5 > ltr_ignore

but the index for ME is 6. Printing a reserved IP helps to properly
calculate LTR ignore offsets.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-21 15:40:49 +02:00
Rajneesh Bhardwaj cd89e92b73 platform/x86: intel_pmc_core: Fix file permissions for ltr_show
File permissions for ltr_show attribute should be similar to other
debugfs attributes created by this driver. '0644' should be used only
when there is a write operation desired such as for ltr_ignore.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2eb150558b ("platform/x86: intel_pmc_core: Show Latency Tolerance info")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-21 15:39:52 +02:00
Heikki Krogerus 393cd68d0d platform/x86: intel_cht_int33fe: Remove old style mux connections
The new mux connection naming scheme is now in use, so
dropping the connections still using the old names. From now
on the same connection description named "mode-switch" is
used with both the port and the alternate modes, so on CHT
the DP alt mode will use the same connection as the port to
get a handle to the mux device.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14 10:52:25 +01:00
Heikki Krogerus 7875732848 platform/x86: intel_cht_int33fe: Prepare for better mux naming scheme
Adding new connections with for the muxes with new
identifiers. The old connection are left in for now.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14 10:52:25 +01:00
Nick Crews 6b7cb2227d platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
In order to allow this code to be re-used, remove the dependency
on the rest of the cros_ec code from the cros_ec_lpc_mec functions.

Instead of using a hardcoded register base address of 0x800 have
this be passed in to cros_ec_lpc_mec_init().  The existing cros_ec
use case now passes in the 0x800 base address this way.

There are some error checks that happen in cros_ec_lpc_mec_in_range()
that probably shouldn't be there, as they are checking kernel-space
callers and not user-space input. However, we'll just do the refactor in
this patch, and in a future patch might remove this error checking and
fix all the instances of code that calls this.

There's a similar problem in cros_ec_lpc_read_bytes(), where we return a
checksum, but on error just return 0. This should probably be changed so
that it returns int, but we don't want to have to mess with all the
calling code for this fix. Maybe we'll come back through later and fix
this.

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-11 10:07:40 +01:00
Greg Kroah-Hartman 5c07488d99 Merge 5.0-rc6 into char-misc-next
We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11 09:05:58 +01:00
Rajneesh Bhardwaj d6827015e6 platform/x86: intel_pmc_core: Fix PCH IP name
For Cannonlake and Icelake, the IP name for Res_6 should be SPF i.e.
South Port F. No functional change is intended other than just renaming
the IP appropriately.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 291101f6a7 ("platform/x86: intel_pmc_core: Add CannonLake PCH support")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:55 +02:00
Rajneesh Bhardwaj 0e68eeea98 platform/x86: intel_pmc_core: Fix PCH IP sts reading
A previous commit "platform/x86: intel_pmc_core: Make the driver PCH
family agnostic <c977b98bbef5898ed3d30b08ea67622e9e82082a>" provided
better abstraction to this driver but has some fundamental issues.

e.g. the following condition

for (index = 0; index < pmcdev->map->ppfear_buckets &&
	index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)

is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which
is _wrong_ and even though ppfear_buckets is 8, the loop fails to read
all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This
patch refactors the pfear show logic to correctly read PCH IP power
gating status for Cannonlake and beyond.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: c977b98bbe ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:55 +02:00
Rajneesh Bhardwaj e50af83327 platform/x86: intel_pmc_core: Handle CFL regmap properly
Only Coffeelake should use Cannonlake regmap other than Cannonlake
platform. This allows Coffeelake special handling only when there is no
matching PCI device and default reg map selected as per CPUID is for
Sunrisepoint PCH. This change is needed to enable support for newer SoCs
such as Icelake.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 661405bd81 ("platform/x86: intel_pmc_core: Special case for Coffeelake")
Acked-by: "David E. Box" <david.e.box@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:55 +02:00
Hans de Goede 871f1f2bcb platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail
Commit c3b8e884de ("platform/x86: intel_int0002_vgpio: Implement irq_set_wake"),
was written to fix some wakeup issues on Bay Trail (BYT) devices.

We've received a bug report that this causes a suspend regression on some
Cherry Trail (CHT) based devices.

To fix the issues this causes on CHT devices, this commit modifies the
irq_set_wake support so that we only implement irq_set_wake on BYT devices,

Fixes: c3b8e884de ("platform/x86: intel_int0002_vgpio: ... irq_set_wake")
Reported-and-tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:54 +02:00
Anthony Wong 0bbbe97f2f platform/x86: ideapad: Add ideapad 330-15ICH to no_hw_rfkill
Lenovo ideapad 330-15ICH does not have hardware radio switch
but driver wrongly reports all radios as hard-blocked, add
it to no_hw_rfkill to fix it.

BugLink: https://bugs.launchpad.net/bugs/1811815
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:54 +02:00
Kai Renzig bbb97d728f platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet
Add touchscreen platform data for the Chuwi Hi8 Air tablet.

Signed-off-by: Kai Renzig <k.renzig@gmail.com>
[andy: fixed driver name and rewrote subject]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:18 +02:00
Hans de Goede 8335ebc1e9 platform/x86: touchscreen_dmi: Add info for the PoV Wintab P1006w (v1.0) tablet
Add touchscreen info for the Point of View Wintab P1006w (v1.0) tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 19:38:20 +02:00
Kai-Heng Feng 38f250b7d4 platform/x86: dell-wmi: Ignore new keyboard backlight change event
There's a new wmi event generated by dell-wmi when pressing keyboard
backlight hotkey:
[ 3285.474172] dell_wmi: Unknown key with type 0x0010 and code 0x003f pressed

This event is for notification purpose, let's ignore it. The keyboard
backlight hotkey uses another event so it still works without event
0x3f.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 19:38:20 +02:00
Hans de Goede 96f984d312 ACPI / scan: Create platform device for BSG2150 ACPI nodes
The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with
a HID of BSG2150 describing the 2 Bosch sensors used in the device a
BMC150 compatible accelerometer and a BMC150 compatible magnetometer.

The ACPI firmware node actually contains 3 I2cSerialBusV2 resources,
but this seems to be a copy and paste job from the BSG1160 firmware node
on other devices, since there is no i2c-client listening to the 0x68
address listed in the third resource and the 0x68 address is identical
to the address of the third resource in the BSG1160 nodes, where as the
other 2 addresses are different.

Add the ID to the I2C multi instantiate list, so that the
i2c-multi-instantiate.c driver can handle it;

And add the necessary info to the i2c-multi-instantiate.c driver to
enumerate all I2C slaves correctly.

To avoid triggering the:

        if (i < multi->num_clients) {
                dev_err(dev, "Error finding driver, idx %d\n", i);

Error this commit lists the 3th device in the i2c_inst_data with a
type of "bsg2150_dummy_dev".

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 19:38:20 +02:00
Enric Balletbo i Serra 73c935de7f platform/chrome: cros_ec_sysfs: remove pr_fmt() define
This driver no longer has any pr_{level} messages. Remove the pr_fmt().

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra d6c7901ba8 platform/chrome: cros_ec_lightbar: remove pr_fmt() define
This driver no longer has any pr_{level} messages. Remove the pr_fmt().

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra 0e27a11f32 platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management. Also change the term 'Chrome OS' for 'ChromeOS' to be
coherent with other drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra 30fc9147ae platform/chrome: cros_ec_spi: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management. Also change the description for one more appropriate.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra b861297cf3 platform/chrome: cros_ec_proto: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra 1058ca940e platform/chrome: cros_ec_lpc: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management. Also remove the license boiler-plate and redundant driver
description.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra f0c70b9bdb platform/chrome: cros_ec_i2c: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management. Also fix the module license mismatch and change the
description for a more descriptive phrase.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra 27755cf709 platform/chrome: cros_ec_vbc: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:06 +01:00
Enric Balletbo i Serra 8d4d794832 platform/chrome: cros_ec_sysfs: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management. Also change the description for one more appropriate.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:05 +01:00
Enric Balletbo i Serra 5414dd14aa platform/chrome: cros_ec_lightbar: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:05 +01:00
Enric Balletbo i Serra cc2db0756f platform/chrome: cros_ec_debugfs: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:05 +01:00
Enric Balletbo i Serra ac8c1a2e50 platform/chrome: cromeos_pstore: switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management. Also fix the module license mismatch and change the term
'Chrome OS' for 'ChromeOS' to be coherent with other drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2019-02-01 10:13:05 +01:00
Enric Balletbo i Serra fd68bd0f5d platform/chrome: cros_ec_lightbar: Instantiate only if the EC has a lightbar
Due to the way attribute groups visibility work, the function
cros_ec_lightbar_attrs_are_visible is called multiple times, once per
attribute, and each of these calls makes an EC transaction. For what is
worth the EC log reports multiple errors on boot when the lightbar is
not available. Instead, check if the EC has a lightbar in the probe
function and only instantiate the device.

Ideally we should have instantiate the driver only if the
EC_FEATURE_LIGHTBAR is defined, but that's not possible because that flag
is not in the very first Pixel Chromebook (Link), only on Samus. So, the
driver is instantiated by his parent always.

This patch changes a bit the actual behaviour. Before the patch if an EC
doesn't have a lightbar an empty lightbar folder is created in
/sys/class/chromeos/<ec-device-name>, after the patch the empty folder is
not created, so, the folder is only created if the lightbar exists.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra 0545625baa mfd / platform: cros_ec_vbc: Instantiate only if the EC has a VBC NVRAM
The cros-ec-vbc driver is DT-only and there is a DT property that
indicates if the EC has the VCB NVRAM, in such case instantiate the
driver but don't instantiate on the other cases.

To do this move the check code to its parent instead of play with the
attribute group visibility. This changes a bit the actual behaviour.
Before the patch if an EC doesn't have a VBC NVRAM an empty vbc folder
is created in /sys/class/chromeos/<ec-device-name>, after the patch the
empty folder is not created, so, the folder is only created if the vbc
is set.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra 6fd7f2bbd4 mfd / platform: cros_ec: Move device sysfs attributes to its own driver
The entire way how cros debugfs attibutes are created is broken.
cros_ec_sysfs should be its own driver and its attributes should be
associated with the sysfs driver not the mfd driver.

The patch also adds the sysfs documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra 6fce0a2cf5 mfd / platform: cros_ec: Move debugfs attributes to its own driver
The entire way how cros debugfs attibutes are created is broken.
cros_ec_debugfs should be its own driver and its attributes should be
associated with a debugfs driver not the mfd driver.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra acb9900f9e mfd / platform: cros_ec: Move vbc attributes to its own driver
The entire way how cros sysfs attibutes are created is broken.
cros_ec_vbc should be its own driver and its attributes should be
associated with a vbc driver not the mfd driver. In order to retain
the path, the vbc attributes are attached to the cros_class.

The patch also adds the sysfs documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra ecf8a6cd94 mfd / platform: cros_ec: Move lightbar attributes to its own driver
The entire way how cros sysfs attibutes are created is broken.
cros_ec_lightbar should be its own driver and its attributes should be
associated with a lightbar driver not the mfd driver. In order to retain
the path, the lightbar attributes are attached to the cros_class.

The patch also adds the sysfs documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra 4bc59c2f7e mfd / platform: cros_ec: Use devm_mfd_add_devices
Use devm_mfd_add_devices() for adding cros-ec core MFD child devices. This
reduces the need of remove callback from platform/chrome for removing the
MFD child devices.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Sinan Kaya 0ee4b5f801 platform/x86: Fix unmet dependency warning for SAMSUNG_Q10
Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix:

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
  Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
  Selected by [y]:
  - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y]

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-29 10:59:07 +01:00
Sinan Kaya d58bf90a32 platform/x86: Fix unmet dependency warning for ACPI_CMPC
Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
  Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
  Selected by [y]:
  - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n)

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-29 10:59:07 +01:00
Greg Kroah-Hartman fdddcfd9c9 Merge 5.0-rc4 into char-misc-next
We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28 08:13:52 +01:00
Vadim Pasternak e7706a4359 platform/x86: mlx-platform: Add support for new VMOD0007 board name
Add support for new Mellanox system type MSN3700C, which is
a cost reduced flavor of the MSN37 system class.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-01-26 11:08:25 -08:00
Vadim Pasternak 83cdb2c111 platform/x86: mlx-platform: Add support for fan capability registers
Provide support for the fan capability registers for the next generation
systems of types MQM87xx, MSN34xx, MSN37xx. These new registers provide
configuration for tachometers and fan drawers connectivity.  Use these
registers for next generation led, fan and hotplug structures in order
to distinguish between the systems which have minor configuration
differences. This reduces the amount of code used to describe such
systems.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-01-26 11:08:25 -08:00
Vadim Pasternak aff475804f platform/x86: mlx-platform: Add support for fan direction register
Provide support for the fan direction register.
This register shows configuration for system fans direction, which could
be forward or reversed.
For forward direction - relevant bit is set 0;
For reversed direction - relevant bit is set 1.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-01-26 11:08:25 -08:00
Jérôme de Bretagne e97a34563d platform/x86: intel-hid: Missing power button release on some Dell models
Power button suspend for some Dell models was added in:

commit 821b853662 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275")

by checking against the power button press notification (0xCE) to report
the power button press event. The corresponding power button release
notification (0xCF) was caught and ignored to stop it from being reported
as an "unknown event" in the logs.

The missing button release event is creating issues on Android-x86, as
reported on the project mailing list for a Dell Latitude 5175 model, since
the events are expected in down/up pairs.

Report the power button release event to fix this issue.

Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9Ro
Tested-by: Tristian Celestin <tristian.celestin@outlook.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: corrected commit reference format per checkpatch]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-01-26 11:07:34 -08:00
Roman Kiryanov dcf9b50e21 drivers: platform: goldfish: fix the checkpatch complain in Kconfig
prefer 'help' over '---help---' for new help texts

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 11:58:33 +01:00
Sinan Kaya 7934d76c88 platform/x86: apple-gmux: Make PCI dependency explicit
After commit 5d32a66541 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set) dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.

This driver depends on the PCI infrastructure but the dependency has
not been called out explicitly yet.

Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-15 23:17:16 +01:00
Sinan Kaya 737ee5824d platform/x86: intel_pmc: Make PCI dependency explicit
After commit 5d32a66541 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set) dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.

Some code in intel_pmc relies on PCI for execution. Specify this
in the Kconfig.

[ Andy S: For sake of a quick fix this introduces a new mandatory
  dependency to the driver which may survive without it. Otherwise
  we need to revisit the driver architecture to address this
  properly. ]

Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-15 23:17:05 +01:00
Sinan Kaya 63680e0d62 platform/x86: intel_ips: make PCI dependency explicit
After commit 5d32a66541 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set) dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.

intel_ips is a PCI device driver but this has not been mentioned
anywhere in Kconfig.

Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-15 23:16:57 +01:00
Linus Torvalds 12133258d7 chrome platform changes for v4.21
Changes for EC_MKBP_EVENT_SENSOR_FIFO handling.
 Also, maintainership changes. Olofj out, Enric balletbo in.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlwucOAACgkQHwn1ewov
 5lhuzA//VHzRpU+9DntQ1N8PWBzEH4+AX1nJSUh18CQ0h9dkHP/34vd5b5ZKZogY
 kwBAvfylxJnMYyTEoLa6y+Cvdy+YqGg5ltx41ZTxIF3nMKTvgLCKIxjWurrg9+Ip
 DLJ6NuhSyJfXnKigJW/E5j/1J8fL9xpJDvzQh0psfK37NZiHeQb6tDaKJ8gWNm0O
 KLrz+PWaKWJICoJIJtdTE/bplxneQNySVoA7xWKC++2cJMrbjCOg4PomHH20sGqR
 sCQNmpJU/ntVqPNnRuuOpW4tcF+Ua1gZnkdp6QXaJNFrgtG0JNwyiQk9Q5PA3Mhd
 /6GEv1TZWJK0b4T9urDQOypbN0t9VWBp/12SaGKbGOhC9MQEYiihOGzVBxJljKml
 KuWke6AoKr3JVAjItoSaplJy2u47sZ4sYlkqxSDrklGatP58l2i72Un3Z+xO9b1z
 9tz6X2hSRJHWZ/DwE7l9v63cHlSkEVEHuZRS2bDv23VRCLEwFmX43346ACCCRJFQ
 Ei+/npGQB0bBjHgpBUHMt5YpHt0dlzqRTLoGrUgTmxKR9KiinPmM/0Ks0/G0ZRGg
 Kygv71y9lL1Npf2rERLCdMgsp0cOaQ+ykv1JsfNIlbAWeSjhEDre5G0DS6cOZmT4
 dZ7D4nh9ERBHv/5jiqvGaU5HWyU9LFhYFXe882KF9BV9wgFLrXk=
 =fyvk
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:

 - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling.

 - Also, maintainership changes. Olofj out, Enric balletbo in.

* tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  MAINTAINERS: platform/chrome: Add Enric as a maintainer
  MAINTAINERS: platform/chrome: remove myself as maintainer
  platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
  platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
2019-01-06 11:40:06 -08:00
Linus Torvalds 96d4f267e4 Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
Linus Torvalds 457fa3469a Char/Misc driver patches for 4.21-rc1
Here is the big set of char and misc driver patches for 4.21-rc1.
 
 Lots of different types of driver things in here, as this tree seems to
 be the "collection of various driver subsystems not big enough to have
 their own git tree" lately.
 
 Anyway, some highlights of the changes in here:
   - binderfs: is it a rule that all driver subsystems will eventually
     grow to have their own filesystem?  Binder now has one to handle the
     use of it in containerized systems.  This was discussed at the
     Plumbers conference a few months ago and knocked into mergable shape
     very fast by Christian Brauner.  Who also has signed up to be
     another binder maintainer, showing a distinct lack of good judgement :)
   - binder updates and fixes
   - mei driver updates
   - fpga driver updates and additions
   - thunderbolt driver updates
   - soundwire driver updates
   - extcon driver updates
   - nvmem driver updates
   - hyper-v driver updates
   - coresight driver updates
   - pvpanic driver additions and reworking for more device support
   - lp driver updates.  Yes really, it's _finally_ moved to the proper
     parallal port driver model, something I never thought I would see
     happen.  Good stuff.
   - other tiny driver updates and fixes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCZCUA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymF9QCgx/Z8Fj1qzGVGrIE4flXOi7pxOrgAoMqJEWtU
 ywwL8M9suKDz7cZT9fWQ
 =xxr6
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc driver patches for 4.21-rc1.

  Lots of different types of driver things in here, as this tree seems
  to be the "collection of various driver subsystems not big enough to
  have their own git tree" lately.

  Anyway, some highlights of the changes in here:

   - binderfs: is it a rule that all driver subsystems will eventually
     grow to have their own filesystem? Binder now has one to handle the
     use of it in containerized systems.

     This was discussed at the Plumbers conference a few months ago and
     knocked into mergable shape very fast by Christian Brauner. Who
     also has signed up to be another binder maintainer, showing a
     distinct lack of good judgement :)

   - binder updates and fixes

   - mei driver updates

   - fpga driver updates and additions

   - thunderbolt driver updates

   - soundwire driver updates

   - extcon driver updates

   - nvmem driver updates

   - hyper-v driver updates

   - coresight driver updates

   - pvpanic driver additions and reworking for more device support

   - lp driver updates. Yes really, it's _finally_ moved to the proper
     parallal port driver model, something I never thought I would see
     happen. Good stuff.

   - other tiny driver updates and fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
  MAINTAINERS: add another Android binder maintainer
  intel_th: msu: Fix an off-by-one in attribute store
  stm class: Add a reference to the SyS-T document
  stm class: Fix a module refcount leak in policy creation error path
  char: lp: use new parport device model
  char: lp: properly count the lp devices
  char: lp: use first unused lp number while registering
  char: lp: detach the device when parallel port is removed
  char: lp: introduce list to save port number
  bus: qcom: remove duplicated include from qcom-ebi2.c
  VMCI: Use memdup_user() rather than duplicating its implementation
  char/rtc: Use of_node_name_eq for node name comparisons
  misc: mic: fix a DMA pool free failure
  ptp: fix an IS_ERR() vs NULL check
  genwqe: Fix size check
  binder: implement binderfs
  binder: fix use-after-free due to ksys_close() during fdget()
  bus: fsl-mc: remove duplicated include files
  bus: fsl-mc: explicitly define the fsl_mc_command endianness
  misc: ti-st: make array read_ver_cmd static, shrinks object size
  ...
2018-12-28 20:54:57 -08:00
Linus Torvalds c0ea81b4d3 USB/PHY patches for 4.21-rc1
Here is the big set of USB and PHY driver patches for 4.21-rc1.
 
 All of the usual bits are in here:
   - loads of USB gadget driver updates and additions
   - new device ids
   - phy driver updates
   - xhci reworks and new features
   - typec updates
 
 Full details are in the shortlog.
 
 All of these have been in linux-next for a long time with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCYxNA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl4pQCfaQBjMxPpp6TVcHANZ/O+zE3NH/wAoL11p3IB
 KUq8v9pmcHO8sW5TWOJw
 =iYGf
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.21-rc1.

  All of the usual bits are in here:

  - loads of USB gadget driver updates and additions

  - new device ids

  - phy driver updates

  - xhci reworks and new features

  - typec updates

  Full details are in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits)
  USB: serial: option: add Fibocom NL678 series
  cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.
  usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
  usb: typec: tcpm: Extend the matching rules on PPS APDO selection
  usb: typec: Improve Alt Mode documentation
  usb: musb: dsps: fix runtime pm for peripheral mode
  usb: musb: dsps: fix otg state machine
  USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
  usb: renesas_usbhs: add support for RZ/G2E
  usb: ehci-omap: Fix deferred probe for phy handling
  usb: roles: Add a description for the class to Kconfig
  usb: renesas_usbhs: mark PM functions as __maybe_unused
  usb: core: Remove unnecessary memset()
  usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE
  phy: qcom-qmp: Expose provided clocks to DT
  dt-bindings: phy-qcom-qmp: Move #clock-cells to child
  phy: qcom-qmp: Utilize fully-specified DT registers
  dt-bindings: phy-qcom-qmp: Fix register underspecification
  phy: ti: fix semicolon.cocci warnings
  phy: dphy: Add configuration helpers
  ...
2018-12-28 20:30:00 -08:00
Linus Torvalds 89261c5702 Here's the main MIPS pull for Linux 4.21. Core architecture changes
include:
 
  - Syscall tables & definitions for unistd.h are now generated by
    scripts, providing greater consistency with other architectures &
    making it easier to add new syscalls.
 
  - Support for building kernels with no floating point support, upon
    which any userland attempting to use floating point instructions will
    receive a SIGILL. Mostly useful to shrink the kernel & as preparation
    for nanoMIPS support which does not yet include FP.
 
  - MIPS SIMD Architecture (MSA) vector register context is now exposed
    by ptrace via a new NT_MIPS_MSA regset.
 
  - ASIDs are now stored as 64b values even for MIPS32 kernels, expanding
    the ASID version field sufficiently that we don't need to worry about
    overflow & avoiding rare issues with reused ASIDs that have been
    observed in the wild.
 
  - The branch delay slot "emulation" page is now mapped without write
    permission for the user, preventing its use as a nice location for
    attacks to execute malicious code from.
 
  - Support for ioremap_prot(), primarily to allow gdb or other
    ptrace users the ability to view their tracee's memory using the same
    cache coherency attribute.
 
  - Optimizations to more cpu_has_* macros, allowing more to be
    compile-time constant where possible.
 
  - Enable building the whole kernel with UBSAN instrumentation.
 
  - Enable building the kernel with link-time dead code & data
    elimination.
 
 Platform specific changes include:
 
  - The Boston board gains a workaround for DMA prefetching issues with
    the EG20T Platform Controller Hub that it uses.
 
  - Cleanups to Cavium Octeon code removing about 20k lines of redundant
    code, mostly unused or duplicate register definitions in headers.
 
  - defconfig updates for the DECstation machines, including new
    defconfigs for r4k & 64b machines.
 
  - Further work on Loongson 3 support.
 
  - DMA fixes for SiByte machines.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXB+vwBUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN3/EgD9Givei//X2oTd4w8HSe/uPeVkMnbA
 93WMi1cS0EogAaUA/R7poLSnAE74mt+DT4PrGdQezUbXts9vUF/7VX0MvFIF
 =hmtJ
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Here's the main MIPS pull for Linux 4.21. Core architecture changes
  include:

   - Syscall tables & definitions for unistd.h are now generated by
     scripts, providing greater consistency with other architectures &
     making it easier to add new syscalls.

   - Support for building kernels with no floating point support, upon
     which any userland attempting to use floating point instructions
     will receive a SIGILL. Mostly useful to shrink the kernel & as
     preparation for nanoMIPS support which does not yet include FP.

   - MIPS SIMD Architecture (MSA) vector register context is now exposed
     by ptrace via a new NT_MIPS_MSA regset.

   - ASIDs are now stored as 64b values even for MIPS32 kernels,
     expanding the ASID version field sufficiently that we don't need to
     worry about overflow & avoiding rare issues with reused ASIDs that
     have been observed in the wild.

   - The branch delay slot "emulation" page is now mapped without write
     permission for the user, preventing its use as a nice location for
     attacks to execute malicious code from.

   - Support for ioremap_prot(), primarily to allow gdb or other ptrace
     users the ability to view their tracee's memory using the same
     cache coherency attribute.

   - Optimizations to more cpu_has_* macros, allowing more to be
     compile-time constant where possible.

   - Enable building the whole kernel with UBSAN instrumentation.

   - Enable building the kernel with link-time dead code & data
     elimination.

  Platform specific changes include:

   - The Boston board gains a workaround for DMA prefetching issues with
     the EG20T Platform Controller Hub that it uses.

   - Cleanups to Cavium Octeon code removing about 20k lines of
     redundant code, mostly unused or duplicate register definitions in
     headers.

   - defconfig updates for the DECstation machines, including new
     defconfigs for r4k & 64b machines.

   - Further work on Loongson 3 support.

   - DMA fixes for SiByte machines"

* tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (95 commits)
  MIPS: math-emu: Write-protect delay slot emulation pages
  MIPS: Remove struct mm_context_t fp_mode_switching field
  mips: generate uapi header and system call table files
  mips: add system call table generation support
  mips: remove syscall table entries
  mips: add +1 to __NR_syscalls in uapi header
  mips: rename scall64-64.S to scall64-n64.S
  mips: remove unused macros
  mips: add __NR_syscalls along with __NR_Linux_syscalls
  MIPS: Expand MIPS32 ASIDs to 64 bits
  MIPS: OCTEON: delete redundant register definitions
  MIPS: OCTEON: cvmx_gmxx_inf_mode: use oldest forward compatible definition
  MIPS: OCTEON: cvmx_mio_fus_dat3: use oldest forward compatible definition
  MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition
  MIPS: OCTEON: octeon-usb: use common gpio_bit definition
  MIPS: OCTEON: enable all OCTEON drivers in defconfig
  mips: annotate implicit fall throughs
  MIPS: Hardcode cpu_has_mips* where target ISA allows
  MIPS: MT: Remove norps command line parameter
  MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y
  ...
2018-12-26 10:45:33 -08:00
Linus Torvalds 8e61e7b5c4 sound updates for 4.21
There are no intensive changes in both ALSA and ASoC core parts while
 rather most of changes are a bunch of driver fixes and updates.
 A large diff pattern appears in ASoC TI part which now merges both
 OMAP and DaVinci stuff, but the rest spreads allover the places.
 
 Note that this pull request includes also some updates for LED trigger
 and platform drivers for mute LEDs, appearing in the diffstat as well.
 
 Some highlights:
 
 ASoC:
 - Preparatory work for merging the audio-graph and audio-graph-scu
   cards
 - A merge of TI OMAP and DaVinci directories, as both product lines
   get merged together.  Also including a few architecture changes as
   well.
 - Major cleanups of the Maxim MAX9867 driver
 - Small fixes for tablets & co with Intel BYT/CHT chips
 - Lots of rsnd updates as usual
 - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
   RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
   controllers
 
 HD-audio:
 - Introduce audio-mute LED trigger for replacing the former hackish
   dynamic binding
 - Huawei WMI hotkey and mute LED support
 - Refactoring of PM code and display power controls
 - Headset button support in the generic jack code
 - A few updates for Tegra
 - Fixups for HP EliteBook and ASUS UX391UA
 - Lots of updates for Intel ASoC HD-audio, including the improved DSP
   detection and the fallback binding from ASoC SST to legacy HD-audio
   controller drivers
 
 Others:
 - Updates for FireWire TASCAM and Fireface devices, some other fixes
 - A few potential Spectre v1 fixes that are all trivial
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlwbbCIOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE+RoQ//TNKliUP3bOv4BdnSmUHcCSAP3st96Ror5lC+
 RZ103UyjlCsfa7hSPfH7/4WHAjk7wXYdazjA3m2swsxsbcjPMW4uBIBJlegQNM/9
 PmNt4y60UgdgMCT/uu10BlEO8GsqBkRpxFYHtUJ3Lq6h9ECa+VDLazNjK9jABItK
 BVG668/LZp0le94cnJsLICmZ7fwKpAvi58hOsgOJLrPP4gzSGTj1gJXw/yyZ99QC
 MPLVj1PruXq1l8zfxM+MUuOa7hayafx64bCbftlITPonWfEr7OvBCQ7Vf9HqzJIJ
 OzEXAclVSc89R7RQT2omPiRKC7AyL85M9PCkpTtXh2D7DGXw9CFj5IDL6eIC4Ip4
 sycArLOo6LA8ZYu45zCiY3rfh9Hx0Zn2qHz3qJeQtBrv5XYULuf6ZNwq6xJDEUz/
 jxS558wSGHYWAyjv/IaPha1+JD6Us7zkSQgum+/qqnYYnYlDyxXnBatj4HzWZP/M
 Khuhj+k+Y8UXK1MbRiekVCGIwCHGf3cUv4H7tq+qpEzvJZwTFnOBh7/twVL8gN96
 x4ozZogaiaenZwlEZlkzowAMBBYMYb537Y+Y5suxzWGz3HN/Z8raaL8GTkIIB/BO
 bNprJtPR8GJLfdu8NE++dUR2VuHfMnWat+frXk0eAsWutoviRyB4JLCRppfpgrA/
 vDhIreU=
 =SG61
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no intensive changes in both ALSA and ASoC core parts while
  rather most of changes are a bunch of driver fixes and updates. A
  large diff pattern appears in ASoC TI part which now merges both OMAP
  and DaVinci stuff, but the rest spreads allover the places.

  Note that this pull request includes also some updates for LED trigger
  and platform drivers for mute LEDs, appearing in the diffstat as well.

  Some highlights:

  ASoC:
   - Preparatory work for merging the audio-graph and audio-graph-scu
     cards
   - A merge of TI OMAP and DaVinci directories, as both product lines
     get merged together. Also including a few architecture changes as
     well.
   - Major cleanups of the Maxim MAX9867 driver
   - Small fixes for tablets & co with Intel BYT/CHT chips
   - Lots of rsnd updates as usual
   - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
     RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx
     I2S controllers

  HD-audio:
   - Introduce audio-mute LED trigger for replacing the former hackish
     dynamic binding
   - Huawei WMI hotkey and mute LED support
   - Refactoring of PM code and display power controls
   - Headset button support in the generic jack code
   - A few updates for Tegra
   - Fixups for HP EliteBook and ASUS UX391UA
   - Lots of updates for Intel ASoC HD-audio, including the improved DSP
     detection and the fallback binding from ASoC SST to legacy HD-audio
     controller drivers

  Others:
   - Updates for FireWire TASCAM and Fireface devices, some other fixes
   - A few potential Spectre v1 fixes that are all trivial"

* tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection
  ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected
  ALSA: HDA: export process_unsol_events()
  ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294
  ALSA: bebob: fix model-id of unit for Apogee Ensemble
  ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
  ALSA: rme9652: Fix potential Spectre v1 vulnerability
  ASoC: ti: Kconfig: Remove the deprecated options
  ARM: davinci_all_defconfig: Update the audio options
  ARM: omap1_defconfig: Do not select ASoC by default
  ARM: omap2plus_defconfig: Update the audio options
  ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
  ARM: OMAP2: Update for new MCBSP Kconfig option
  ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
  MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
  ASoC: ti: Merge davinci and omap directories
  ALSA: hda: add mute LED support for HP EliteBook 840 G4
  ALSA: fireface: code refactoring to handle model-specific registers
  ALSA: fireface: add support for packet streaming on Fireface 800
  ALSA: fireface: allocate isochronous resources in mode-specific implementation
  ...
2018-12-25 13:19:10 -08:00
Ayman Bagabas bf4fb28c6e platform/x86: add support for Huawei WMI hotkeys
This driver adds support for missing hotkeys on some Huawei laptops.
Laptops such as the Matebook X have non functioning hotkeys. Whereas
newer laptops such as the Matebook X Pro come with working hotkeys out
of the box.

Old laptops, such as the Matebook X, report hotkey events through ACPI
device "\WMI0". However, new laptops, such as the Matebook X Pro, does
not have this WMI device.

All the hotkeys on the Matebook X Pro work fine without this patch
except (micmute, wlan, and huawei key). These keys and the brightness
keys report events to "\AMW0" ACPI device. One problem is that
brightness keys on the Matebook X Pro work without this patch. This
results in reporting two brightness key press events one is captured
by ACPI and another by this driver.

A solution would be to check if such event came from the "\AMW0" WMI
driver then skip reporting event. Another solution would be to leave
this to user-space to handle. Which can be achieved by using "hwdb"
tables and remap those keys to "unknown". This solution seems more
natural to me because it leaves the decision to user-space.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-13 09:23:27 +01:00
Vadim Pasternak fb7255a923 platform/x86: mlx-platform: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:54:42 -08:00
Vadim Pasternak e2883859dd platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems
Allow mlxreg-io platform driver activation for  the next generation
systems, in particular for MQM87xx, MSN34xx, MSN37xx types, which have:
- extended reset causes bits related to ComEx reset, voltage devices
  firmware upgrade, system platform reset;
- additional CPLD device;
- JTAG select capability;

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:54:41 -08:00
Vadim Pasternak 440f343df1 platform/x86: mlx-platform: Fix LED configuration
Exchange LED configuration between msn201x and next generation systems
types.

Bug was introduced when LED driver activation was added to mlx-platform.
LED configuration for the three new system MQMB7, MSN37, MSN34 was
assigned to MSN21 and vice versa. This bug affects MSN21 only and
likely requires backport to v4.19.

Fixes: 1189456b1c ("platform/x86: mlx-platform: Add LED platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:53:18 -08:00
Vadim Pasternak edd45cba5e platform/x86: mlx-platform: Fix tachometer registers
Shift by one the registers for tachometers (7 - 12).

This fix is relevant for the same new systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
This fix is necessary, because register used before for tachometer 7
has been than reserved for the second PWM for newer systems, which are
not supported yet in mlx-platform driver. So registers of tachometers
7-12 have been shifted by one.

Fixes: 0378123c58 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:49:15 -08:00
Vadim Pasternak 3752e5c764 platform/x86: mlx-platform: Rename new systems product names
Rename product names for next generation systems QMB7, SN37, SN34 to
respectively MQMB7, MSN37, MSN34.

All these systems are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
The names have been changed due to marketing decision.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:49:15 -08:00
Vadim Pasternak 59e96ec85e platform/x86: mlx-platform: Add definitions for new registers
Add definitions for new registers:
- CPLD3 version - next generation systems are equipped with three CPLD;
- Two reset cause registers, which store the system reset reason (like
  system failures, upgrade failures and so on;

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-12-10 17:49:15 -08:00
Yangtao Li ef688fc79c platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-10 11:31:00 +02:00
Yangtao Li 3b1f99558d platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-10 11:31:00 +02:00
Jouke Witteveen 599eefffcf platform/x86: thinkpad_acpi: Cleanup quirks macros
- Use generic quirks macros for fan quirks
The fan-specific quirks macros were duplicates of the generic ones.

- Remove useless #undef lines
The referenced macros are not defined anywhere.

Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-10 11:31:00 +02:00
Hans de Goede f25b6302b2 platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11
Add a DMI match for the Mediacom Flexbook Edge 11, this is the same hw
as the Trekstor Primebook C11, so we use the same settings.

Reported-by: rmbg <alexofrichardmilitiabg@hotmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-07 20:04:23 +02:00
Andy Shevchenko 440da5a30e staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
Since we are going to use the same in Designware USB 3 driver,
rename the property to be consistent across the drivers.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05 10:25:43 +01:00
Ville Syrjälä 6a31061833 platform/x86: Fix config space access for intel_atomisp2_pm
We lose even config space access when we power gate the ISP
via the PUNIT. That makes lspci & co. produce gibberish.

To fix that let's try to implement actual runtime pm hooks
and inform the pci core that the device always goes to
D3cold. That will cause the pci core to resume the device
before attempting config space access.

This introduces another annoyance though. We get the
following error every time we try to resume the device:
intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3

The reason being that the pci core tries to put the device
back into D0 via the standard PCI PM mechanism before
calling the driver resume hook. To fix this properly
we'd need to infiltrate the platform pm hooks (could
turn ugly real fast), or use pm domains (which don't
seem to exist on x86), or some extra early resume
hook for the driver (which doesn't exist either).
So maybe we just choose to live with the error?

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:03 +02:00
Ville Syrjälä 8a7d714152 platform/x86: Add the VLV ISP PCI ID to atomisp2_pm
If the ISP is exposed as a PCI device VLV machines need the
same treatment as CHV machines to power gate the ISP. Otherwise
s0ix will not work.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-03 21:40:03 +02:00
Andy Shevchenko e6f5e6c2fb platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-03 21:40:03 +02:00
Andy Shevchenko 1d5caaa853 platform/x86: intel_ips: Remove never happen condition
At ->remove() stage we know that device had been instantiated properly,
so, it can't be an invalid pointer to the driver data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-03 21:40:03 +02:00
Thomas Meyer 0b8a6aeab9 platform/x86: intel_ips: NULL check before some freeing functions is not needed
NULL check before some freeing functions is not needed.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-03 21:40:03 +02:00
YueHaibing 9a92ed29ca platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init
As Greg KH explained in:
https://lkml.org/lkml/2015/8/15/114

There no need to check the return value of debugfs_create_file() and
debugfs_create_dir().

This also fix static code checker warnings:

drivers/platform/x86/intel_ips.c:1314
 ips_debugfs_init() warn: passing zero to 'PTR_ERR'
drivers/platform/x86/intel_ips.c:1328
 ips_debugfs_init() warn: passing zero to 'PTR_ERR'

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-03 21:40:03 +02:00
Andy Shevchenko a3dd034a17 ACPI / scan: Create platform device for INT3515 ACPI nodes
The ACPI device with INT3515 _HID is representing a complex USB PD
hardware infrastructure which includes several I2C slave ICs.

We add an ID to the I2C multi instantiate list to enumerate
all I2C slaves correctly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-03 21:40:03 +02:00
Andy Shevchenko 2336dfadfb platform/x86: i2c-multi-instantiate: Allow to have same slaves
Currently the driver will not enumerate the devices where I2C slaves
are of the same type.

Add an instance number to make them unique.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko 799d3379a6 platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
If ACPI table provides an Interrupt() resource we may consider to use it
instead of GpioInt() one.

Here we leave an error condition, when getting IRQ resource, to the driver
to decide how to proceed, because some drivers may consider IRQ resource
optional.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko 870ab9a379 platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
As a preparatory patch switch the driver to distinguish IRQ resource type.
For now, only GpioInt() is supported.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko a729656697 platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
Instead of relying on hard coded and thus expected number of I2C clients,
count the real amount provided by firmware.

This allows to support non-fixed amount of the slaves.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko 79dd67306f platform/x86: i2c-multi-instantiate: Get rid of obsolete conditional
Now, when i2c_acpi_new_device() never returns NULL, there is no point to check
for it. Besides that, i2c_acpi_new_device() returns -EPROBE_DEFER directly and
caller doesn't need to guess is better.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko 09e568f783 platform/x86: intel_cht_int33fe: Get rid of obsolete conditional
Now, when i2c_acpi_new_device() never returns NULL, there is no point to check
for it. Besides that, i2c_acpi_new_device() returns -EPROBE_DEFER directly and
caller doesn't need to guess is better.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko 1aaeae493a platform/x86: i2c-multi-instantiate: Defer probe when no adapter found
Likewise the rest of the i2c_acpi_new_device() users, defer the probe
of the i2c-multi-intantiate driver in case adapter is not yet found.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:02 +02:00
Andy Shevchenko 41daf98582 platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
In the future i2c_acpi_new_device() will return error pointer in some cases.
Prepare i2c-multi-instantiate driver to support that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:01 +02:00
Andy Shevchenko 5ae9ce1326 platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
In the future i2c_acpi_new_device() will return error pointer in some cases.
Prepare intel_cht_int33fe driver to support that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:01 +02:00
Andy Shevchenko 6734489667 platform/x86: intel_cht_int33fe: Remove duplicate NULL check
Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-12-03 21:40:01 +02:00
Gustavo A. R. Silva 4ecd94b8e1 platform/x86: dell-laptop: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-11-28 16:13:25 -08:00
Takashi Iwai 9e908a180e platform/x86: thinkpad_acpi: Drop superfluous exported function
Since we've switched to the LED trigger for binding with HD-audio,
we can drop the exported function as well as the whole
linux/thinkpad_acpi.h.

The own TPACPI_LED_MUTE and TPACPI_LED_MICMUTE definitions are
replaced with the identical ones for LEDS, i.e. LED_AUDIO_MUTE and
LED_AUDIO_MICMUTE, respectively.  They are no longer needed as
referred only locally.

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 23:26:52 +01:00
Takashi Iwai f783e128a6 platform/x86: dell-laptop: Drop superfluous exported function
Since we've switched to the LED trigger for binding with HD-audio,
we can drop the exported function as well as the whole
linux/dell-led.h.

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 23:25:23 +01:00
Takashi Iwai 4e1d092445 platform/x86: thinkpad_acpi: Add audio mute LED classdev support
In the upcoming change, the binding of audio mute / mic-mute LED
controls will be switched with LED trigger.  This patch is the last
piece of preparation: adding the audio mute / mic-mute LED class
devices to thinkpad_acpi driver.

Two devices, platform::mute and platform::micmute, will be added for
controlling the mute LED and mic-mute LED, respectively.  The new
prefix "platform" is the suggestion by upstream for indicating the
generic laptop attribute.

Also this selects CONFIG_LEDS_TRIGGERS and CONFIG_LEDS_TRIGGERS_AUDIO
unconditionally.  Strictly speaking, these aren't 100% mandatory, but
leaving these manual selections would lead to a functional regression
easily once after converting from the dynamic symbol binding to the
LEDs trigger in a later patch.

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 23:25:10 +01:00
Takashi Iwai d00fa46e0a platform/x86: dell-laptop: Add micmute LED trigger support
This patch adds the LED trigger support for audio mic-mute control.
As of this patch, the LED device isn't tied with the audio driver, and
can be changed via user-space at "platform::micmute" sysfs entry.
(This new prefix "platform" is the agreement among people for
indicating the generic laptop / system-wide attribute.)

The binding with HD-audio is still done via the existing exported
dell_micmute_led_set().  It will be replaced with the LED trigger
binding in later patches.

Also this selects CONFIG_LEDS_TRIGGERS and CONFIG_LEDS_TRIGGERS_AUDIO
unconditionally.  Strictly speaking, these aren't 100% mandatory, but
leaving these manual selections would lead to a functional regression
easily once after converting from the dynamic symbol binding to the
LEDs trigger in a later patch.

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 23:22:25 +01:00
Loic WEI YU NENG 91a7536082 platform/x86: ideapad-laptop: Add Yoga 2 13 to no_hw_rfkill list
Some Lenovo IdeaPad models lack a physical rfkill switch.
On Lenovo models Yoga 2 13, ideapad-laptop would wrongly report all
radios as blocked by hardware which caused wireless network connections
to fail.

Add these models without an rfkill switch to the no_hw_rfkill list.

Signed-off-by: Loic WEI YU NENG <loic.wyn@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-27 17:45:19 +02:00
Huacai Chen f3ade25361
MIPS: Loongson: Add Loongson-3A R2.1 basic support
Loongson-3A R2.1 is the bugfix revision of Loongson-3A R2.

All Loongson-3 CPU family:

Code-name         Brand-name       PRId
Loongson-3A R1    Loongson-3A1000  0x6305
Loongson-3A R2    Loongson-3A2000  0x6308
Loongson-3A R2.1  Loongson-3A2000  0x630c
Loongson-3A R3    Loongson-3A3000  0x6309
Loongson-3A R3.1  Loongson-3A3000  0x630d
Loongson-3B R1    Loongson-3B1000  0x6306
Loongson-3B R2    Loongson-3B1500  0x6307

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21128/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
2018-11-19 15:20:31 -08:00
Brian Norris 6ad16b78a0
platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of
reasons, and there are very few cases in which they should be treated as
wakeup interrupts (particularly, when a certain
MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the
mainline cros_ec_sensor driver yet). Most of the time, they are benign
sensor readings. In any case, the top-level cros_ec device doesn't know
enough to determine that they should wake the system, and so it should
not report the event. This would be the job of the cros_ec_sensors
driver to parse.

This patch adds checks to cros_ec_get_next_event() such that it doesn't
signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO.

This patch is particularly relevant on devices like Scarlet (Rockchip
RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware
reports sensor events much more frequently. This was causing
/sys/power/wakeup_count to increase very frequently, often needlessly
interrupting our ability to suspend the system.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-11-13 21:25:28 -08:00
Brian Norris 475b08734e
platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
cros_ec_get_next_event() is documented to return 0 for success and
negative for errors. It currently returns negative for some errors, and
non-negative (number of bytes received) for success (including some "no
data available" responses as zero). This mostly works out OK, because the
callers were more or less ignoring the documentation, and only treating
positive values as success (and indepdently checking the modification of
'wakeup').

Let's button this up by avoiding pretending to handle event/wakeup
distinctions when no event info was retrieved (i.e., returned 0 bytes).
And fix the documentation of cros_ec_get_host_event() and
cros_ec_get_next_event() to accurately describe their behavior.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-11-13 21:25:14 -08:00
Rajneesh Bhardwaj 8122e7cd80 platform/x86: intel_pmc_core: Decode Snoop / Non Snoop LTR
The LTR values follow PCIE LTR encoding format and can be decoded as per
https://pcisig.com/sites/default/files/specification_documents/ECN_LatencyTolnReporting_14Aug08.pdf

This adds support to translate the raw LTR values as read from the PMC
to meaningful values in nanosecond units of time.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-10 16:28:10 +02:00
Rajneesh Bhardwaj 2d649d972b platform/x86: intel_pmc_core: Fix LTR IGNORE Max offset
Cannonlake PCH allows us to ignore LTR from more IPs than Sunrisepoint
PCH so make the LTR ignore platform specific.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-10 16:28:10 +02:00
Rajneesh Bhardwaj 2eb150558b platform/x86: intel_pmc_core: Show Latency Tolerance info
This adds support to show the Latency Tolerance Reporting for the IPs on
the PCH as reported by the PMC. The format shown here is raw LTR data
payload that can further be decoded as per the PCI specification.

This also fixes some minor alignment issues in the header file by
removing spaces and converting to tabs at some places.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-10 16:28:10 +02:00
João Paulo Rechi Vita 71b12beaf1 platform/x86: asus-nb-wmi: Drop mapping of 0x33 and 0x34 scan codes
According to Asus firmware engineers, the meaning of these codes is only
to notify the OS that the screen brightness has been turned on/off by
the EC. This does not match the meaning of KEY_DISPLAYTOGGLE /
KEY_DISPLAY_OFF, where userspace is expected to change the display
brightness.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-07 15:56:42 +02:00
João Paulo Rechi Vita b3f2f3799a platform/x86: asus-nb-wmi: Map 0x35 to KEY_SCREENLOCK
When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.

The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.

The key that matches this behavior the closest is KEY_SCREENLOCK.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-07 15:56:42 +02:00
João Paulo Rechi Vita 78f3ac76d9 platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey
In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.

Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.

Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.

 Scope (_SB)
 {
     (...)

     Device (ATKD)
     {
         (...)

         Name (_WDG, Buffer (0x28)
         {
             /* 0000 */  0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
             /* 0008 */  0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
             /* 0010 */  0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
             /* 0018 */  0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
             /* 0020 */  0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
         })
         Method (WMNB, 3, Serialized)
         {
             CreateDWordField (Arg2, Zero, IIA0)
             CreateDWordField (Arg2, 0x04, IIA1)
             Local0 = (Arg1 & 0xFFFFFFFF)

             (...)

             If ((Local0 == 0x53564544))
             {
                 (...)

                 If ((IIA0 == 0x00050011))
                 {
                     If ((IIA1 == 0x02))
                     {
                         ^^PCI0.SBRG.EC0.SPIN (0x72, One)
                         ^^PCI0.SBRG.EC0.BLCT = One
                     }

                     Return (One)
                 }
             }
             (...)
         }
         (...)
     }
     (...)
 }
 (...)

 Scope (_SB.PCI0.SBRG.EC0)
 {
     (...)

     Name (BLCT, Zero)

     (...)

     Method (_Q10, 0, NotSerialized)  // _Qxx: EC Query
     {
         If ((BLCT == Zero))
         {
             Local0 = One
             Local0 = RPIN (0x72)
             Local0 ^= One
             SPIN (0x72, Local0)
             If (ATKP)
             {
                 Local0 = (0x34 - Local0)
                 ^^^^ATKD.IANE (Local0)
             }
         }
         ElseIf ((BLCT == One))
         {
             If (ATKP)
             {
                 ^^^^ATKD.IANE (0x35)
             }
         }
     }
     (...)
 }

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-07 15:56:42 +02:00
Zhang Xianwei 8055db3a5b platform/x86: thinkpad_acpi: Change the keymap for Favorites hotkey
The keycode KEY_FAVORITES(0x16c) used in thinkpad_acpi driver is too
big (out of range > 255) for xorg to handle.
xkeyboard-config has already mapped KEY_BOOKMARKS(156) to
XF86Favorites:

keycodes/evdev:
    <I164> = 164;   // #define KEY_BOOKMARKS           156

symbols/inet:
    key <I164>   {      [ XF86Favorites         ]       };

So change the keymap to KEY_BOOKMARKS for Favorites hotkey.

Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-11-07 15:56:42 +02:00
Peng Hao fcb418cd56 pvpanic: move pvpanic to misc as common driver
Move pvpanic.c from drivers/platform/x86 to drivers/misc.
Following patches will use pvpanic device in arm64.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07 13:53:03 +01:00
Linus Torvalds eb7046e9bf platform-drivers-x86 for v4.20-1
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as
 they are closely coupled with other drivers in this location.
 
 Improve _init* usage for acerhdf and fix some usage issues with messages
 and module parameters.
 
 Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
 workqueue overhead, eliminate double reporting of keyboard backlight.
 
 Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
 
 Notify intel_telemetry users when IPC1 device is not enabled.
 
 Update various drivers with new laptop model IDs.
 
 Update several intel drivers to use SPDX identifers and order headers
 alphabetically.
 
 The following is an automated git shortlog grouped by driver:
 
 Add Intel AtomISP2 dummy / power-management driver:
  - Add Intel AtomISP2 dummy / power-management driver
 
 lg-laptop:
  - Add LG Gram laptop special features driver
 
 HID:
  -  asus: only support backlight when it's not driven by WMI
 
 MAINTAINERS:
  -  intel_telemetry: Update maintainers info
  -  intel_pmc_core: Update MAINTAINERS
  -  Update maintainer for dcdbas and dell_rbu
  -  Use my infradead account exclusively for PDx86 work
 
 acerhdf:
  -  restructure to allow large BIOS table be __initconst
  -  mark appropriate content with __init prefix
  -  Add BIOS entry for Gateway LT31 v1.3307
  -  Remove cut-and-paste trap from instructions
  -  Enable ability to list supported systems
  -  clarify modinfo messages for BIOS override
 
 asus-wmi:
  -  export function for evaluating WMI methods
  -  Only notify kbd LED hw_change by fn-key pressed
  -  Simplify the keyboard brightness updating process
 
 firmware:
  -  dcdbas: include linux/io.h
  -  dcdbas: Move dcdbas to drivers/platform/x86
  -  dell_rbu: Move dell_rbu to drivers/platform/x86
  -  dcdbas: Add support for WSMT ACPI table
  -  dell_rbu: Make payload memory uncachable
 
 ideapad-laptop:
  -  Add Y530-15ICH to no_hw_rfkill
  -  Use __func__ instead of read_ec_cmd in pr_err
 
 intel-hid:
  -  Convert to use SPDX identifier
 
 intel-ips:
  -  Convert to use SPDX identifier
 
 intel-rst:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel-smartconnect:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel-wmi-thunderbolt:
  -  Add dynamic debugging
  -  Convert to use SPDX identifier
 
 intel_bxtwc_tmu:
  -  Convert to use SPDX identifier
 
 intel_cht_int33fe:
  -  Convert to use SPDX identifier
 
 intel_chtdc_ti_pwrbtn:
  -  Add SPDX identifier
 
 intel_int0002_vgpio:
  -  Convert to use SPDX identifier
  -  Implement irq_set_wake
  -  Enable the driver on Bay Trail platforms
 
 intel_menlow:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_mid_powerbtn:
  -  Convert to use SPDX identifier
  -  Remove unnecessary init.h inclusion
  -  Get rid of custom ICPU() macro
 
 intel_mid_thermal:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_oaktrail:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_pmc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_punit_ipc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_scu_ipc:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 intel_telemetry:
  -  Get rid of custom macro
  -  report debugfs failure
  -  Convert to use SPDX identifier
 
 intel_turbo_max_3:
  -  Convert to use SPDX identifier
  -  Sort headers alphabetically
 
 mlx-platform:
  -  Properly use mlxplat_mlxcpld_msn201x_items
 
 touchscreen_dmi:
  -  Add min-x and min-y settings for various models
  -  Add info for the Onda V80 Plus v3 tablet
  -  Add info for the Trekstor Primetab T13B tablet
  -  Add info for the Trekstor Primebook C11 convertible
 
 tracing:
  -  Trivia spelling fix containerof() -> container_of()
 
 wmi:
  -  declare device_type structure as constant
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn
 0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74
 c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd
 3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y
 QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8
 pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY=
 =0BDZ
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
   as they are closely coupled with other drivers in this location.

 - Improve _init* usage for acerhdf and fix some usage issues with
   messages and module parameters.

 - Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
   workqueue overhead, eliminate double reporting of keyboard backlight.

 - Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).

 - Notify intel_telemetry users when IPC1 device is not enabled.

 - Update various drivers with new laptop model IDs.

 - Update several intel drivers to use SPDX identifers and order headers
   alphabetically.

* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  HID: asus: only support backlight when it's not driven by WMI
  platform/x86: asus-wmi: export function for evaluating WMI methods
  platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
  platform/x86: wmi: declare device_type structure as constant
  platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
  platform/x86: Add Intel AtomISP2 dummy / power-management driver
  platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
  platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
  platform/x86: intel_telemetry: Get rid of custom macro
  platform/x86: intel_telemetry: report debugfs failure
  MAINTAINERS: intel_telemetry: Update maintainers info
  platform/x86: Add LG Gram laptop special features driver
  platform/x86: asus-wmi: Simplify the keyboard brightness updating process
  platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
  platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
  MAINTAINERS: intel_pmc_core: Update MAINTAINERS
  firmware: dcdbas: include linux/io.h
  platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
  platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
  ...
2018-11-01 08:42:21 -07:00
Linus Torvalds 5b7449810a chrome-platform for v4.20
* Move mfd/cros_ec_lpc* includes to drivers/platform from mfd
 * Adding a new interrupt path for cros_ec_lpc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlvaNx8ACgkQHwn1ewov
 5li9/g//apJnCEFTCNoxsQlqj15io3Osogpm3uPw85u5OzkSgs9aSTTlzjcf6gYO
 nowl2vn009fI0vPEdOqIj1KOw2F2ATHyRFXl4Ap0HOF8eERGKS46SLSy93cUvdxc
 rAeHY23lJ/3/7nrJTMnIbFxpukNR7RgoXPlGRb3Gj6me879nTNr68YU48lvTJIM1
 dS5m19joL/JnR93iPZwf9PTI6C95eYFgalCMfwBYDAhk4sk7Ovk1LMsoLh9vT1i2
 xBW16AaF0CgEJbiCc57ktbN/Fkt/tdcdiZmn+hvXvRFOOu3HDXvoXOJa/IxBgruk
 mgVzvBordNIiSdPN9T4Cof17NJiU58RtcfFe+GuftUJ8S5NSPQbelch+Pfa+cknn
 zvEwv/0rLWvWmu1cmkHCLq2QdHxaNIiGMuIxIDZfhihGn1kTcD/FTgX5nt3hVYRk
 yVSKe/1ed6yCnYvSQ6x3uprBGpMayJCaSco/lQzWX6Iqe6eEXOYxm43YsQmddPLA
 jnzJlmfuAb6lyvdgD5mrGkV/3/GdYp/t5OUUefTnhPWsfS1l/aaqeDvyVNuqsMGp
 EyeYz+9Nilc17G8iuXw272/YZF6JhL7CO7vjxKqyRIaDUjj2HBzMUZ+NrgPg08AJ
 MHRBltRT/LayKg5e/9tKylF1UhstMli7sldX6qRXL1A8q6vYWC4=
 =cmQo
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome-platform updates from Benson Leung:

 - Move mfd/cros_ec_lpc* includes to drivers/platform from mfd

 - Adding a new interrupt path for cros_ec_lpc

* tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: chromeos_tbmc - Remove unneeded const
  platform/chrome: Add a new interrupt path for cros_ec_lpc
  mfd: cros_ec: Fix and improve kerneldoc comments.
  platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
2018-10-31 16:47:55 -07:00
Daniel Drake ffb6ce7086 platform/x86: asus-wmi: export function for evaluating WMI methods
Export asus_wmi_evaluate_method() and related headers for use by other
drivers.

hid-asus is going to use this to avoid advertising that it has a keyboard
backlight when the keyboard backlight is controlled via WMI.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-31 16:11:40 +02:00
Jian-Hong Pan 29f6eb533c platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
Since commit dbb3d78f61 ("platform/x86: asus-wmi: Call led hw_changed
API on kbd brightness change"), asus-wmi directly changes the keyboard
LED brightness when the keyboard brightness keys are pressed,
raising the appropriate notification.

However, this notification was unintentionally also being raised during
boot and resume from suspend. This was resulting in userspace showing
the keyboard LED OSD on resume for no good reason.

Move the keyboard LED brightness changed notification
from kbd_led_update to the new kbd_led_set_by_kbd function which is only
called from the keyboard brightness function keys codepath.

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-31 16:11:40 +02:00
Bhumika Goyal 69372c1dbd platform/x86: wmi: declare device_type structure as constant
The only usage of device_type structure is getting stored as
a reference in the type field of device structure. This type
field is declared const. Therefore, the device_type structure
can never be modified and can be declared as const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-31 16:11:39 +02:00
Misha Komarovskiy 0252894f53 platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
Lenovo Legion Y530-15ICH is another model without
hardware radio switch. Add it to no_hw_rfkill to
enable wireless.

Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-31 16:11:39 +02:00
Hans de Goede 49ad712afa platform/x86: Add Intel AtomISP2 dummy / power-management driver
The Image Signal Processor found on Cherry Trail devices is brought up in
D0 state on devices which have camera sensors attached to it. The ISP will
not enter D3 state again without some massaging of its registers beforehand
and the ISP not being in D3 state blocks the SoC from entering S0ix modes.

There was a driver for the ISP in drivers/staging but that got removed
again because it never worked. It does not seem likely that a real
driver for the ISP will be added to the mainline kernel anytime soon.

This commit adds a dummy driver which contains the necessary magic from
the staging driver to powerdown the ISP, so that Cherry Trail devices where
the ISP is used will properly use S0ix modes when suspended.

Together with other recent S0ix related fixes this allows S0ix modes to
be entered on e.g. a Chuwi Hi8 Pro and a HP x2 210.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196915
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-29 14:02:14 +02:00
Hans de Goede 4104916d8c platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
Add min-x and min-y settings now that we've support for this and for some
models also update the width/height settings with slighly more accurate
values.

This fixes touches along the edges registering at the wrong coordinates.

While at it also set max-fingers to 10 in a couple of cases where the
touchpad can handle 10 fingers (rather then the default 5) and that was
missing.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-29 12:21:57 +02:00
Linus Torvalds 18d0eae30e Char/Misc driver patches for 4.20-rc1
Here is the big set of char/misc patches for 4.20-rc1.
 
 Loads of things here, we have new code in all of these driver
 subsystems:
 	fpga
 	stm
 	extcon
 	nvmem
 	eeprom
 	hyper-v
 	gsmi
 	coresight
 	thunderbolt
 	vmw_balloon
 	goldfish
 	soundwire
 
 along with lots of fixes and minor changes to other small drivers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9Le5A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn+BQCfZ6DtCIgqo0UW3dLV8Fd0wya9kw0AoNglzJJ6
 YRZiaSdRiggARpNdh3ME
 =97BX
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc patches for 4.20-rc1.

  Loads of things here, we have new code in all of these driver
  subsystems:
   - fpga
   - stm
   - extcon
   - nvmem
   - eeprom
   - hyper-v
   - gsmi
   - coresight
   - thunderbolt
   - vmw_balloon
   - goldfish
   - soundwire
  along with lots of fixes and minor changes to other small drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits)
  Documentation/security-bugs: Clarify treatment of embargoed information
  lib: Fix ia64 bootloader linkage
  MAINTAINERS: Clarify UIO vs UIOVEC maintainer
  docs/uio: fix a grammar nitpick
  docs: fpga: document programming fpgas using regions
  fpga: add devm_fpga_region_create
  fpga: bridge: add devm_fpga_bridge_create
  fpga: mgr: add devm_fpga_mgr_create
  hv_balloon: Replace spin_is_locked() with lockdep
  sgi-xp: Replace spin_is_locked() with lockdep
  eeprom: New ee1004 driver for DDR4 memory
  eeprom: at25: remove unneeded 'at25_remove'
  w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).
  misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr'
  misc: mic: fix a DMA pool free failure
  platform: goldfish: pipe: Add a blank line to separate varibles and code
  platform: goldfish: pipe: Remove redundant casting
  platform: goldfish: pipe: Call misc_deregister if init fails
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
  ...
2018-10-26 09:11:43 -07:00
Linus Torvalds 9703fc8caf USB/PHY patches for 4.20-rc1
Here is the big USB/PHY driver patches for 4.20-rc1
 
 Lots of USB changes in here, primarily in these areas:
   - typec updates and new drivers
   - new PHY drivers
   - dwc2 driver updates and additions (this old core keeps getting added
     to new devices.)
   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.
   - USB gadget additions for new features
   - USB gadget configfs updates
   - chipidea driver updates
   - other USB gadget updates
   - USB serial driver updates
   - renesas driver updates
   - xhci driver updates
   - other tiny USB driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9LlHw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymnvwCffYmMWyMG9zSOw1oSzFPl7TVN1hYAoMyJqzLg
 umyLwWxC9ZWWkrpc3iD8
 =ux+Y
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...
2018-10-26 08:14:13 -07:00
Linus Torvalds bd6bf7c104 pci-v4.20-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlvPV7IUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vyaUg//WnCaRIu2oKOp8c/bplZJDW5eT10d
 oYAN9qeyptU9RYrg4KBNbZL9UKGFTk3AoN5AUjrk8njxc/dY2ra/79esOvZyyYQy
 qLXBvrXKg3yZnlNlnyBneGSnUVwv/kl2hZS+kmYby2YOa8AH/mhU0FIFvsnfRK2I
 XvwABFm2ZYvXCqh3e5HXaHhOsR88NQ9In0AXVC7zHGqv1r/bMVn2YzPZHL/zzMrF
 mS79tdBTH+shSvchH9zvfgIs+UEKvvjEJsG2liwMkcQaV41i5dZjSKTdJ3EaD/Y2
 BreLxXRnRYGUkBqfcon16Yx+P6VCefDRLa+RhwYO3dxFF2N4ZpblbkIdBATwKLjL
 npiGc6R8yFjTmZU0/7olMyMCm7igIBmDvWPcsKEE8R4PezwoQv6YKHBMwEaflIbl
 Rv4IUqjJzmQPaA0KkRoAVgAKHxldaNqno/6G1FR2gwz+fr68p5WSYFlQ3axhvTjc
 bBMJpB/fbp9WmpGJieTt6iMOI6V1pnCVjibM5ZON59WCFfytHGGpbYW05gtZEod4
 d/3yRuU53JRSj3jQAQuF1B6qYhyxvv5YEtAQqIFeHaPZ67nL6agw09hE+TlXjWbE
 rTQRShflQ+ydnzIfKicFgy6/53D5hq7iH2l7HwJVXbXRQ104T5DB/XHUUTr+UWQn
 /Nkhov32/n6GjxQ=
 =58I4
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...
2018-10-25 06:50:48 -07:00
Linus Torvalds c05f3642f4 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "The main updates in this cycle were:

   - Lots of perf tooling changes too voluminous to list (big perf trace
     and perf stat improvements, lots of libtraceevent reorganization,
     etc.), so I'll list the authors and refer to the changelog for
     details:

       Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
       Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
       Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
       Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
       Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.

     ... with the bulk of the changes written by Jiri Olsa, Tzvetomir
     Stoyanov and Arnaldo Carvalho de Melo.

   - Continued intel_rdt work with a focus on playing well with perf
     events. This also imported some non-perf RDT work due to
     dependencies. (Reinette Chatre)

   - Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
     This allows to speed up the PMI handler by avoiding unnecessary MSR
     writes and make it more accurate. (Andi Kleen)

   - kprobes cleanups and simplification (Masami Hiramatsu)

   - Intel Goldmont PMU updates (Kan Liang)

   - ... plus misc other fixes and updates"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
  kprobes/x86: Use preempt_enable() in optimized_callback()
  x86/intel_rdt: Prevent pseudo-locking from using stale pointers
  kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
  perf/x86/intel: Export mem events only if there's PEBS support
  x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
  x86/intel_rdt: Fix initial allocation to consider CDP
  x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
  x86/intel_rdt: Introduce utility to obtain CDP peer
  tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
  tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
  perf python: More portable way to make CFLAGS work with clang
  perf python: Make clang_has_option() work on Python 3
  perf tools: Free temporary 'sys' string in read_event_files()
  perf tools: Avoid double free in read_event_file()
  perf tools: Free 'printk' string in parse_ftrace_printk()
  perf tools: Cleanup trace-event-info 'tdata' leak
  perf strbuf: Match va_{add,copy} with va_end
  perf test: S390 does not support watchpoints in test 22
  perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
  tools include: Adopt linux/bits.h
  ...
2018-10-23 13:32:18 +01:00
Hans de Goede 01b6b7e6e0 platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
Add touchscreen platform data for the Onda V80 Plus v3 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-19 19:23:35 +03:00
Marian Cepok 30394a8e8c platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
Add touchscreen info for the Trekstor Primetab T13B tablet.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marian Cepok <marian.cepok@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-19 19:23:34 +03:00
Andy Shevchenko 1a7938a632 platform/x86: intel_telemetry: Get rid of custom macro
Replace custom grown macro with generic INTEL_CPU_FAM6() one.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-19 19:23:34 +03:00
Rajneesh Bhardwaj 8d98b1ef36 platform/x86: intel_telemetry: report debugfs failure
On some Goldmont based systems such as ASRock J3455M the BIOS may not
enable the IPC1 device that provides access to the PMC and PUNIT. In
such scenarios, the IOSS and PSS resources from the platform device can
not be obtained and result in a invalid telemetry_plt_config which is an
internal data structure that holds platform config and is maintained by
the telemetry platform driver.

This is also applicable to the platforms where the BIOS supports IPC1
device under debug configurations but IPC1 is disabled by user or the
policy.

This change allows user to know the reason for not seeing entries under
/sys/kernel/debug/telemetry/* when there is no apparent failure at boot.

Cc: Matt Turner <matt.turner@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779
Acked-by: Matt Turner <matt.turner@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-19 19:23:34 +03:00
Matan Ziv-Av dbf0c5a6b1 platform/x86: Add LG Gram laptop special features driver
A driver for LG Gram laptop supporting features not available through the
standard interfaces:

- Support for the 5 Fn keys that generate ACPI or WMI events.

- Two software controlled LEDs: keyboard backlight (also controlled by
  hardware) and touchpad LED.

- Extra features: reader mode, Fn lock, cooling mode, USB charge mode, and
  maximal battery charging level.

Signed-off-by: Matan Ziv-Av <matan@svgalib.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-19 19:21:57 +03:00
Jian-Hong Pan 9fe44fc98c platform/x86: asus-wmi: Simplify the keyboard brightness updating process
The original asus-wmi queues a work which calls the ACPI/WMI methods to
update the keyboard LED brightness.  Similar drivers - acer-wmi,
dell-wmi-led just call the ACPI/WMI methods directly without workqueues.

This patch simplifies the keyboard brightness updating process which
calls the kbd_led_update function directly without workqueue in
asus-wmi.

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-19 14:50:57 +03:00
Hans de Goede 589edb56b4 ACPI / scan: Create platform device for INT33FE ACPI nodes
Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC
have an ACPI node with a HID of INT33FE which is a "virtual" battery
device implementing a standard ACPI battery interface which depends upon
a proprietary, undocument OpRegion called BMOP. Since we do have docs
for the actual fuel-gauges used on these boards we instead use native
fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which
rely on this INT33FE device for their battery monitoring.

On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS)
describe a non-existing I2C client at address 0x6b with a bus-speed of
100KHz. This is a problem on some boards since there are actual devices
on that same bus which need a speed of 400KHz to function properly.

This commit adds the INT33FE HID to the list of devices with I2C resources
which should be enumerated as a platform-device rather then letting the
i2c-core instantiate an i2c-client matching the first I2C resource,
so that its bus-speed will not influence the max speed of the I2C bus.
This fixes e.g. the touchscreen not working on the Teclast X98 II Plus.

The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special.
Its first I2C resource is for a secondary I2C address of the PMIC itself,
which is already described in an ACPI device with an INT34D3 HID.

But it has 3 more I2C resources describing 3 other chips for which we do
need to instantiate I2C clients and which need device-connections added
between them for things to work properly. This special case is handled by
the drivers/platform/x86/intel_cht_int33fe.c code.

Before this commit that code was binding to the i2c-client instantiated
for the secondary I2C address of the PMIC, since we now instantiate a
platform device for the INT33FE device instead, this commit also changes
the intel_cht_int33fe driver from an i2c driver to a platform driver.

This also brings the intel_cht_int33fe drv inline with how we instantiate
multiple i2c clients from a single ACPI device in other cases, as done
by the drivers/platform/x86/i2c-multi-instantiate.c code.

Reported-and-tested-by: Alexander Meiler <alex.meiler@protonmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18 09:26:37 +02:00
Roman Kiryanov 6d7d725b2e platform: goldfish: pipe: Add a blank line to separate varibles and code
checkpacth: Missing a blank line after declarations

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 20:36:46 +02:00
Roman Kiryanov e6fb319330 platform: goldfish: pipe: Remove redundant casting
This casting is not required.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 20:36:46 +02:00
Roman Kiryanov 60a6e5233f platform: goldfish: pipe: Call misc_deregister if init fails
Undo effects of misc_register if driver's init fails after
misc_register.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 20:36:46 +02:00
Roman Kiryanov 08360e26f2 platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
This is the last patch in the series of patches to move file-scope
variables into the driver state. This change will help to introduce
another version of the pipe driver (with different state) for the
older host interface or having several instances of this device.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 20:36:46 +02:00
Roman Kiryanov 43c2cc2864 platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
This is a series of patches to move mutable file-scope variables
into the driver state. This change will help to introduce another
version of the pipe driver (with different state) for the older
host interface or having several instances of this device.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 20:36:46 +02:00
Roman Kiryanov c394cc3b47 platform: goldfish: pipe: Move the file-scope goldfish_interrupt_tasklet variable into the driver state
This is a series of patches to move mutable file-scope variables
into the driver state. This change will help to introduce another
version of the pipe driver (with different state) for the older
host interface or having several instances of this device.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 20:36:46 +02:00
Nathan Chancellor bc3f4b5c60
platform/chrome: chromeos_tbmc - Remove unneeded const
Clang warns:

drivers/platform/chrome/chromeos_tbmc.c:102:14: warning: duplicate
'const' declaration specifier [-Wduplicate-decl-specifier]
static const SIMPLE_DEV_PM_OPS(chromeos_tbmc_pm_ops, NULL,
             ^
./include/linux/pm.h:365:56: note: expanded from macro
'SIMPLE_DEV_PM_OPS'
                                                       ^
1 warning generated.

SIMPLE_DEV_PM_OPS is already declared as const, this one is unnecessary
so remove it.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09 22:40:12 -07:00
Enrico Granata da1cf5a1cf
platform/chrome: Add a new interrupt path for cros_ec_lpc
This commit allows cros_ec_lpc to register a direct IRQ instead of relying
on the ACPI notification chain to receive MKBP events.

This change is done in the interest of allowing reduced jitter in the
communication path between the CrOS EC and the host for receiving sensor
data.

Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09 21:44:44 -07:00
Benson Leung 2c42dd6e0e
Merge remote-tracking branch 'origin/ib-chrome-platform-mfd-move-cros_ec_lpc' into working-branch-for-4.20 2018-10-09 21:29:51 -07:00
Emil Karlson d4d2313a3c
mfd: cros-ec: copy the whole event in get_next_event_xfer
Commit 57e94c8b97 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.

The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.

Fixes: 57e94c8b97 ("mfd: cros-ec: Increase maximum mkbp event size")

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09 20:57:30 -07:00
Hans de Goede cacad0b2e3 platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
Add touchscreen info for the Trekstor Primebook C11 convertible.

Cc: Alicia Hormann <ahormann@gmx.net>
Suggested-by: Alicia Hormann <ahormann@gmx.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-08 17:47:44 +03:00
Nathan Chancellor 8289c4b6f2 platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
Clang warns that mlxplat_mlxcpld_msn201x_items is not going to be
emitted in the final assembly because it's only used in ARRAY_SIZE right
now, which is a compile time evaluation since the array's size is known.

drivers/platform/x86/mlx-platform.c:555:32: warning: variable
'mlxplat_mlxcpld_msn201x_items' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static struct mlxreg_core_item mlxplat_mlxcpld_msn201x_items[] = {
                               ^
1 warning generated.

It appears this was a copy and paste mistake from when this item was
first added. Use the definition in mlxplat_mlxcpld_msn201x_data so that
Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/141
Fixes: a49a41482f ("platform/x86: mlx-platform: Add support for new msn201x system type")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-08 17:47:43 +03:00
Arnd Bergmann 2991cc2296 firmware: dcdbas: include linux/io.h
memremap() is declared in linux/io.h, not in asm/io.h, so we should
include that header to avoid build errors:

drivers/platform/x86/dcdbas.c: In function 'dcdbas_check_wsmt':
drivers/platform/x86/dcdbas.c:572:15: error: implicit declaration of function 'memremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]
  eps_buffer = memremap(eps->smm_comm_buff_addr, remap_size, MEMREMAP_WB);
               ^~~~~~~~
               ioremap
drivers/platform/x86/dcdbas.c:572:61: error: 'MEMREMAP_WB' undeclared (first use in this function)
  eps_buffer = memremap(eps->smm_comm_buff_addr, remap_size, MEMREMAP_WB);
                                                             ^~~~~~~~~~~
drivers/platform/x86/dcdbas.c:572:61: note: each undeclared identifier is reported only once for each function it appears in
drivers/platform/x86/dcdbas.c: In function 'dcdbas_exit':
drivers/platform/x86/dcdbas.c:748:3: error: implicit declaration of function 'memunmap'; did you mean 'vm_munmap'? [-Werror=implicit-function-declaration]

Fixes: 12c956c4f3 ("firmware: dcdbas: Add support for WSMT ACPI table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-03 11:27:22 +03:00
Peter Zijlstra f2c4db1bd8 x86/cpu: Sanitize FAM6_ATOM naming
Going primarily by:

  https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors

with additional information gleaned from other related pages; notably:

 - Bonnell shrink was called Saltwell
 - Moorefield is the Merriefield refresh which makes it Airmont

The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE

  for i in `git grep -l FAM6_ATOM` ; do
	sed -i  -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g'		\
		-e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/'		\
		-e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g'		\
		-e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g'	\
		-e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g'		\
		-e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g'	\
		-e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g'	\
		-e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g'	\
		-e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g'	\
		-e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g'		\
		-e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i}
  done

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dave.hansen@linux.intel.com
Cc: len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-02 10:14:32 +02:00
Greg Kroah-Hartman 29f79155b9 Merge 4.19-rc6 into usb-next
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-30 08:09:14 -07:00
Greg Kroah-Hartman 29c222d1a9 Merge 4.19-rc6
We want those fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-30 08:06:14 -07:00
Mario Limonciello 7eccb5edba platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
Some users have been reporting issues with thunderbolt being turned off
before fully initialized. This is suspected to be caused by userspace
turning off the Thunderbolt controller using intel-wmi-thunderbolt
prematurely.

Userspace has already made some mitigations for this situation:
https://github.com/hughsie/fwupd/commit/ef6f1d76983c9b66
https://github.com/hughsie/fwupd/commit/c07ce5b4889a5384

To allow easier debugging of this situation add output that can be turned
on with dynamic debugging to better root cause this problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199631
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201227
Suggested-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-09-27 12:18:20 +03:00
Andy Shevchenko a8694eebae platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:20 +03:00
Andy Shevchenko de415deeb6 platform/x86: intel_turbo_max_3: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:20 +03:00
Andy Shevchenko 303211089c platform/x86: intel_turbo_max_3: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:20 +03:00
Andy Shevchenko 917f450aa3 platform/x86: intel_telemetry: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:20 +03:00
Andy Shevchenko 3e57f2648a platform/x86: intel-smartconnect: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, throw away some extra blank lines.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:19 +03:00
Andy Shevchenko 8046f0499c platform/x86: intel-smartconnect: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion and
move MODULE_DEVICE_TABLE() close to the table.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:19 +03:00
Andy Shevchenko 9b748e0efe platform/x86: intel_scu_ipc: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:19 +03:00
Andy Shevchenko 2d0554e8ba platform/x86: intel_scu_ipc: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:19 +03:00
Andy Shevchenko bd7c5866bb platform/x86: intel-rst: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, throw away some extra blank lines.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:19 +03:00
Andy Shevchenko 5f4ad6afe9 platform/x86: intel-rst: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:19 +03:00
Andy Shevchenko bc15757e0c platform/x86: intel_punit_ipc: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:18 +03:00
Andy Shevchenko 5e66d08e6b platform/x86: intel_punit_ipc: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:18 +03:00
Andy Shevchenko ad51f287ff platform/x86: intel_pmc: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:18 +03:00
Andy Shevchenko 9088177200 platform/x86: intel_pmc: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:18 +03:00
Andy Shevchenko 56ca5ec102 platform/x86: intel_oaktrail: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:18 +03:00
Andy Shevchenko bce99455f5 platform/x86: intel_oaktrail: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:18 +03:00
Andy Shevchenko 56df47de25 platform/x86: intel_mid_thermal: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:17 +03:00
Andy Shevchenko e6e69a31dc platform/x86: intel_mid_thermal: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:17 +03:00
Andy Shevchenko f6b27d0907 platform/x86: intel_mid_powerbtn: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:17 +03:00
Andy Shevchenko f7949b185b platform/x86: intel_mid_powerbtn: Remove unnecessary init.h inclusion
No need to include linux/init.h when linux/module.h is.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:17 +03:00
Andy Shevchenko 0b5d9856b6 platform/x86: intel_menlow: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:17 +03:00
Andy Shevchenko 8855ab3b2e platform/x86: intel_menlow: Sort headers alphabetically
Sort headers alphabetically for better maintenance.

No functional change.

While here, remove unneeded linux/init.h inclusion.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:17 +03:00
Andy Shevchenko c4e4c94641 platform/x86: intel-ips: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:16 +03:00
Andy Shevchenko 79c24dbdcb platform/x86: intel_int0002_vgpio: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:16 +03:00
Andy Shevchenko 31daa5dd32 platform/x86: intel-hid: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:16 +03:00
Andy Shevchenko 924931745b platform/x86: intel_chtdc_ti_pwrbtn: Add SPDX identifier
Driver misses the licence text or identifier, thus, append it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:16 +03:00
Andy Shevchenko 83e8ee26cb platform/x86: intel_cht_int33fe: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

While here, correct MODULE_LICENSE() string to be aligned with license text.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:16 +03:00
Andy Shevchenko 24c6f7200b platform/x86: intel_bxtwc_tmu: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:16 +03:00
Stuart Hayes 8e5cddd126 firmware: dcdbas: Move dcdbas to drivers/platform/x86
Move dcdbas to the more appropriate directory drivers/platform/x86.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:15 +03:00
Stuart Hayes c48e2ffd71 firmware: dell_rbu: Move dell_rbu to drivers/platform/x86
Move dell_rbu to the more appropriate directory drivers/platform/x86.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 12:18:15 +03:00
Paul Gortmaker f7eaf3fb9d platform/x86: acerhdf: restructure to allow large BIOS table be __initconst
There is a table of Vendor/Model/Version {control data} in this driver,
but outside of the initial probe, the V/M/V is never used again, and
neither are any of the entries for platforms other than the one which
matches the running target.

By simply storing the {control data} for the matched platform, we can
mark the large table __initconst, which reduces the loaded driver size
by 20 percent.

Before:
	root@gw:~/git/linux-head# lsmod
	Module                  Size  Used by
	acerhdf                20480  0
	root@gw:~/git/linux-head#

After:
	root@gw:~/git/linux-head# lsmod
	Module                  Size  Used by
	acerhdf                16384  0
	root@gw:~/git/linux-head#

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
2018-09-27 12:18:08 +03:00
Paul Gortmaker 1d0c3fd01a platform/x86: acerhdf: mark appropriate content with __init prefix
These three functions are only called from the probe code which is
already marked __init and hence these can be __init as well.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
2018-09-27 12:18:02 +03:00
Paul Gortmaker 684238d79a platform/x86: acerhdf: Add BIOS entry for Gateway LT31 v1.3307
To fix:

  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!

As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
2018-09-27 12:17:56 +03:00
Paul Gortmaker 14c2068829 platform/x86: acerhdf: Remove cut-and-paste trap from instructions
Just like we avoid specifying actual block devices like sda for fdisk
and dd examples, we should not specify specific thermal zones here.

On the platform I was testing on, zone0 was acpitz, and zone1 was for
this acerhdf driver.  Make the printk such that it won't work with a
blind cut-and-paste, and force the user to determine which zone is
correct for this driver.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
2018-09-27 12:17:47 +03:00
Paul Gortmaker 291bd0e460 platform/x86: acerhdf: Enable ability to list supported systems
This driver has two module parameters that allow an override of the
checks for matching model and BIOS version.  However, both parameters
expect you to choose an entry from the existing list of supported
systems, encoded within the driver itself.

Without the source, such as in a binary distribution, the end user
does not have access to this information, thus rendering the two
module parameters essentially useless.

Add a module parameter that allows the end user to dump the list
of make/model/versions so that they can then pick one that most
closely matches their own system.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
2018-09-27 12:17:40 +03:00
Paul Gortmaker 3836b816dd platform/x86: acerhdf: clarify modinfo messages for BIOS override
Normally, a module parameter for a BIOS check override implies "pretend
you support this version" (and the user will enter their local version).

However, this driver uses the model/BIOS module parameters in a way that
is "pretend my system is the supported model XYZ with BIOS version ABC."
which is less common.

Since the help strings don't make such a distinction, one gets this
somewhat frustrating scenario, where the user sees the error, enters
*their* BIOS version and then gets the same error:

  root@gw:~# modprobe acerhdf
  acerhdf: Acer Aspire One Fan driver, v.0.7.0
  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!
  modprobe: ERROR: could not insert 'acerhdf': Invalid argument

  root@gw:~# modprobe acerhdf force_bios=v1.3307
  acerhdf: Acer Aspire One Fan driver, v.0.7.0
  acerhdf: forcing BIOS version: v1.3307
  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!
  modprobe: ERROR: could not insert 'acerhdf': Invalid argument

Clarify the module param help text to make it clear that the driver
expects a choice from existing supported models/versions.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
2018-09-27 12:17:27 +03:00
Andy Shevchenko a8b60e484f platform/x86: intel_mid_powerbtn: Get rid of custom ICPU() macro
Replace custom grown macro with generic INTEL_CPU_FAM6() one.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 11:45:29 +03:00
Hans de Goede c3b8e884de platform/x86: intel_int0002_vgpio: Implement irq_set_wake
We were relying on the interrupt being shared with the ACPI SCI and the
ACPI core calling irq_set_wake. But that does not always happen on
Bay Trail devices, so we should do it ourselves.

This fixes wake from USB not working on various Bay Trail devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 11:45:29 +03:00
Hans de Goede 96402de65a platform/x86: intel_int0002_vgpio: Enable the driver on Bay Trail platforms
The intel_int0002_vgpio driver was added to avoid an IRQ 9 storm on Cherry
Trail platforms.

When originally merged the CPU ID for Bay Trail SoCs was commented out
of the list of valid CPU IDs because we did not have any reports of the
IRQ storm on Bay Trail platforms.

We now have a report of the IRQ 9 storm on the Bay Trail based Thinkpad
Tablet 10 which is fixed by enabling this driver, so lets enable it on
Bay Trail too.

I've tested various other Bay Trail device with this driver enabled
without adverse side-effects.

BugLink: https://www.dpin.de/nf/finally-s0i3-is-there-thinkpad-tablet-10-sleeps-deeply-with-linux-kernel-4-15rc/#comments
Reported-and-tested-by: Nicole Faerber <nicole@id3p.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 11:45:29 +03:00
Zhang Xianwei 31e56f2305 platform/x86: ideapad-laptop: Use __func__ instead of read_ec_cmd in pr_err
Refer to the commit f1395edbce ("platform/x86: ideapad-laptop: Use
__func__ instead of write_ec_cmd in pr_err"), prefer using '"%s...",
__func__' to using 'read_ec_cmd' in read_ec_data.

Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-09-27 11:45:28 +03:00
Wei Yongjun 3790e28cdb platform: goldfish: pipe: Make symbol 'goldfish_pipe_dev' static
Fixes the following sparse warning:

drivers/platform/goldfish/goldfish_pipe.c:214:26: warning:
 symbol 'goldfish_pipe_dev' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25 20:38:57 +02:00
Roman Kiryanov 581ae6b722 platform: goldfish: pipe: Remove redundant header include
No symbols were used from this header.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25 20:25:42 +02:00
Roman Kiryanov 6b979998a0 platform: goldfish: pipe: Remove redundant struct declarations
goldfish_pipe_command is defines just after declaration and
nothing refers to goldfish_pipe before it is defined.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25 20:25:42 +02:00
Roman Kiryanov 77994c69b6 platform: goldfish: pipe: Remove a redundant blank line
The blank line is not required there.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25 20:25:42 +02:00
Roman Kiryanov 48a2d422b5 platform: goldfish: pipe: Prevent memory corruption from several threads writing to the same variable
Move the "pages" buffer into "struct goldfish_pipe". Since we are
locking the mutex on the pipe in transfer_max_buffers, other threads
willnot be able to write into it, but other pipe instances could be
served because they have its own buffer.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25 20:25:42 +02:00
Roman Kiryanov 9b9a4a3f14 platform: goldfish: pipe: Remove license boilerplate
The boilerplate license is not necessary when the SPDX line is
present.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25 20:25:42 +02:00
Heikki Krogerus 148b0aa78e platform: x86: intel_cht_int33fe: Remove the old connections for the muxes
USB Type-C class driver now expects the muxes to be always
assigned to the ports and not controllers, so the
connections for the mux and fusb302 can be removed.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:37:29 +02:00
Heikki Krogerus 495965a100 platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
Assigning the mux to the USB Type-C port on top of fusb302.
That will prepare this driver for the change in the USB
Type-C class code, where the class driver will assume the
muxes to be always assigned to the ports and not the
controllers.

Once the USB Type-C class driver has been updated, the
connections between the mux and fusb302 can be dropped.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:37:29 +02:00
Heikki Krogerus 78d2b54b13 platform: x86: intel_cht_int33fe: Add connection for the DP alt mode
Adding a connection for the DisplayPort alternate mode.
PI3USB30532 is used for muxing the port to DisplayPort on
CHT platforms. The connection allows the alternate mode
device to get handle to the mux, and therefore make it
possible to use the USB Type-C connector as DisplayPort.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:37:29 +02:00
Heikki Krogerus 140a4ec4ad platform: x86: intel_cht_int33fe: Register all connections at once
We can register all device connection descriptors with a
single call to device_connections_add().

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:37:29 +02:00
Heikki Krogerus 50e4991214 platform: x86: intel_cht_int33fe: Add dependency on muxes
The connections create clear dependency on the muxes.
fusb302 fails to probe unless we have the mux drivers
available.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20 13:37:28 +02:00
Lukas Wunner 125450f814 PCI: hotplug: Embed hotplug_slot
When the PCI hotplug core and its first user, cpqphp, were introduced in
February 2002 with historic commit a8a2069f432c, cpqphp allocated a slot
struct for its internal use plus a hotplug_slot struct to be registered
with the hotplug core and linked the two with pointers:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Nowadays, the predominant pattern in the tree is to embed ("subclass")
such structures in one another and cast to the containing struct with
container_of().  But it wasn't until July 2002 that container_of() was
introduced with historic commit ec4f214232cf:
https://git.kernel.org/tglx/history/c/ec4f214232cf

pnv_php, introduced in 2016, did the right thing and embedded struct
hotplug_slot in its internal struct pnv_php_slot, but all other drivers
cargo-culted cpqphp's design and linked separate structs with pointers.

Embedding structs is preferrable to linking them with pointers because
it requires fewer allocations, thereby reducing overhead and simplifying
error paths.  Casting an embedded struct to the containing struct
becomes a cheap subtraction rather than a dereference.  And having fewer
pointers reduces the risk of them pointing nowhere either accidentally
or due to an attack.

Convert all drivers to embed struct hotplug_slot in their internal slot
struct.  The "private" pointer in struct hotplug_slot thereby becomes
unused, so drop it.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>  # drivers/pci/hotplug/rpa*
Acked-by: Sebastian Ott <sebott@linux.ibm.com>        # drivers/pci/hotplug/s390*
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86
Cc: Len Brown <lenb@kernel.org>
Cc: Scott Murray <scott@spiteful.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
2018-09-18 17:52:15 -05:00
Lukas Wunner a7da21613c PCI: hotplug: Drop hotplug_slot_info
Ever since the PCI hotplug core was introduced in 2002, drivers had to
allocate and register a struct hotplug_slot_info for every slot:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Apparently the idea was that drivers furnish the hotplug core with an
up-to-date card presence status, power status, latch status and
attention indicator status as well as notify the hotplug core of changes
thereof.  However only 4 out of 12 hotplug drivers bother to notify the
hotplug core with pci_hp_change_slot_info() and the hotplug core never
made any use of the information:  There is just a single macro in
pci_hotplug_core.c, GET_STATUS(), which uses the hotplug_slot_info if
the driver lacks the corresponding callback in hotplug_slot_ops.  The
macro is called when the user reads the attribute via sysfs.

Now, if the callback isn't defined, the attribute isn't exposed in sysfs
in the first place (see e.g. has_power_file()).  There are only two
situations when the hotplug_slot_info would actually be accessed:

* If the driver defines ->enable_slot or ->disable_slot but not
  ->get_power_status.

* If the driver defines ->set_attention_status but not
  ->get_attention_status.

There is no driver doing the former and just a single driver doing the
latter, namely pnv_php.c.  Amend it with a ->get_attention_status
callback.  With that, the hotplug_slot_info becomes completely unused by
the PCI hotplug core.  But a few drivers use it internally as a cache:

cpcihp uses it to cache the latch_status and adapter_status.
cpqhp uses it to cache the adapter_status.
pnv_php and rpaphp use it to cache the attention_status.
shpchp uses it to cache all four values.

Amend these drivers to cache the information in their private slot
struct.  shpchp's slot struct already contains members to cache the
power_status and adapter_status, so additional members are only needed
for the other two values.  In the case of cpqphp, the cached value is
only accessed in a single place, so instead of caching it, read the
current value from the hardware.

Caution:  acpiphp, cpci, cpqhp, shpchp, asus-wmi and eeepc-laptop
populate the hotplug_slot_info with initial values on probe.  That code
is herewith removed.  There is a theoretical chance that the code has
side effects without which the driver fails to function, e.g. if the
ACPI method to read the adapter status needs to be executed at least
once on probe.  That seems unlikely to me, still maintainers should
review the changes carefully for this possibility.

Rafael adds: "I'm not aware of any case in which it will break anything,
[...] but if that happens, it may be necessary to add the execution of
the control methods in question directly to the initialization part."

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>  # drivers/pci/hotplug/rpa*
Acked-by: Sebastian Ott <sebott@linux.ibm.com>        # drivers/pci/hotplug/s390*
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86
Cc: Len Brown <lenb@kernel.org>
Cc: Scott Murray <scott@spiteful.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
2018-09-18 17:52:15 -05:00
Lukas Wunner 81c4b5bf30 PCI: hotplug: Constify hotplug_slot_ops
Hotplug drivers cannot declare their hotplug_slot_ops const, making them
attractive targets for attackers, because upon registration of a hotplug
slot, __pci_hp_initialize() writes to the "owner" and "mod_name" members
in that struct.

Fix by moving these members to struct hotplug_slot and constify every
driver's hotplug_slot_ops except for pciehp.

pciehp constructs its hotplug_slot_ops at runtime based on the PCIe
port's capabilities, hence cannot declare them const.  It can be
converted to __write_rarely once that's mainlined:
http://www.openwall.com/lists/kernel-hardening/2016/11/16/3

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>  # drivers/pci/hotplug/rpa*
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86
Cc: Len Brown <lenb@kernel.org>
Cc: Scott Murray <scott@spiteful.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
2018-09-18 17:52:15 -05:00
Roman Kiryanov bfb8e83847 platform: goldfish: pipe: Replace "x==NULL" to "!x"
checkpatch: Comparison to NULL could be written "!x"

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:31 +02:00
Roman Kiryanov cc14057f51 platform: goldfish: pipe: Move logical ops to the end of the prev line
checkpatch: Logical continuations should be on the previous line

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:31 +02:00
Roman Kiryanov 52bcc7d942 platform: goldfish: pipe: Fix alignment to match parenthesis
checkpatch: Alignment should match open parenthesis.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:31 +02:00
Roman Kiryanov 562a74de97 platform: goldfish: pipe: Fix lines to not end an opening bracket
checkpatch: Lines should not end with a '(' or '['

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:31 +02:00
Roman Kiryanov 92c320b97e platform: goldfish: pipe: Rename goldfish_x to goldfish_pipe_x
Add "pipe" to the pipe related function names.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov a0739604f4 platform: goldfish: pipe: Remove reduntant casting to (void)
Casting to (void) is no-op.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 61b38f027f platform: goldfish: pipe: Rename 'wakeBit' to 'wake_bit'
checkpatch: Avoid CamelCase

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 1d1021a0f9 platform: goldfish: pipe: Remove a blank line before '}'
checkpatch: Blank lines aren't necessary before a close brace '}'

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 468e62f92e platform: goldfish: pipe: Remove reduntant casting
Casting to u32 is not required here.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 610a72b707 platform: goldfish: pipe: Replace two code blocks with a function call
Two function calls look cleaner because the function introduces
takes case of all bit shifting and casting.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 2ed43e53e3 platform: goldfish: pipe: Remove a redundant variable
The variable was not very useful.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 46928cc6ff platform: goldfish: pipe: Add blank lines to separate struct members
To improve readability and to be consistent with other
struct members.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 25b97d5706 platform: goldfish: pipe: Replace pr_ with dev_ for logging
dev_ is preferred if struct device is available.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 869fd5023a platform: goldfish: pipe: Replace an array of 1 with a variable
There is no reason to have an array of 1.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov d23069a5a5 platform: goldfish: pipe: Fail compilation if structs are too large
Since the driver provides no workaround prevent in cases if structs do
no fit into a memory page, it is better to fail complation to find about
the issue earlt instead of returning errors at runtime.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 84ae527aa5 platform: goldfish: pipe: Update the comment for GFP_ATOMIC
Provide an explanation why GFP_ATOMIC is needed to prevent changing it to
other values.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 95577010a4 platform: goldfish: pipe: Separate the host interface to a separate header
These are several enums that must kept in sync with the host side.
This change explicitly separates them into a dedicated header file.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov 53bdf6686e platform: goldfish: pipe: Move an opening brace to the next line
checkpatch: Function's opening brace has to be at the
beginning of the next line.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov c3c4e307db platform: goldfish: pipe: Update license
goldfish_pipe is distributed under GPL v2.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Roman Kiryanov ed82421565 platform: goldfish: pipe: Fix comments to fit 80 columns
Some comment lines are longer than 80 symbols.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14 15:31:30 +02:00
Mario Limonciello ff0e9f2628 platform/x86: alienware-wmi: Correct a memory leak
An ACPI buffer that was allocated was not being freed after use.

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-09-10 13:45:43 -07:00
Mario Limonciello affab51082 platform/x86: dell-smbios-wmi: Correct a memory leak
ACPI buffers were being allocated but never freed.

Reported-by: Pinzhen Xu <pinzhen.xu@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-09-10 13:45:43 -07:00
Enric Balletbo i Serra cc8a4ea182 platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
The cros-ec-lpc driver lives in drivers/platform because is platform
specific, however there are two includes (cros_ec_lpc_mec.h and
cros_ec_lpc_reg.h) that lives in include/linux/mfd. These two includes
are only used for the platform driver and are not really related to the
MFD subsystem, so move the includes from include/linux/mfd to
drivers/platform/chrome.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-09-07 15:56:36 +08:00
Linus Torvalds 899fbc33fd platform-drivers-x86 for v4.19-1
The driver for Silead touchscreen configurations has been renamed
 from silead_dmi to touchscreen_dmi since it starts supporting other
 touchscreens which require some DMI quirks. At the same release cycle
 it gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
 Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.
 
 Another bunch of changes is related to Mellanox platform code to allow
 user space to communicate with Mellanox for system control and
 monitoring purposes. The driver notifies user on hotplug device signal
 receiving.
 
 ASUS WMI drivers recognize lid flip action on UX360, and correctly
 toggles airplane mode LED. In addition the keyboard backlight toggle
 gets support.
 
 ThinkPad ACPI driver enables support for calculator key (on at least P52).
 It also has been fixed to support three characters model designators,
 which are used for modern laptops. Earlier the battery, marked as BAT1,
 on ThinkPad laptops has not been configured properly, which is fixed.
 On the opposite the multi-battery configurations now probed correctly.
 
 Dell SMBIOS driver starts working on some Dell servers which do not
 support token interface. The regression with backlight detection has
 also been fixed. In order to support dock mode on some laptops,
 Intel virtual button driver has been fixed. The last but not least
 is the fix to Intel HID driver due to changes in Dell systems that
 prevented to use power button.
 
 The following is an automated git shortlog grouped by driver:
 
 acer-wmi:
  -  Silence "unsupported" message a bit
  -  refactor function has_cap
 
 asus-nb-wmi:
  -  Add keymap entry for lid flip action on UX360
 
 asus-wireless:
  -  Fix uninitialized symbol usage
  -  Toggle airplane mode LED
 
 asus-wmi:
  -  Add keyboard backlight toggle support
  -  Call led hw_changed API on kbd brightness change
 
 dell-laptop:
  -  Fix backlight detection
 
 dell-smbios:
  -  make a function and a pointer static
 
 dell-smbios-base:
  -  Support systems without tokens
 
 dell-smbios-wmi:
  -  make function dell_smbios_wmi_call static
 
 ideapad-laptop:
  -  Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
  -  Apply no_hw_rfkill to Y20-15IKBM, too
 
 intel-hid:
  -  Add support for Device Specific Methods
 
 intel_ips:
  -  remove redundant variables slope and offset
 
 intel_pmc_core:
  -  Add CNP SLPS0 debug registers
 
 intel_punit_ipc:
  -  fix build errors
 
 intel-vbtn:
  -  Add support for dock mode detection
 
 mlx-platform:
  -  Fix copy-paste error in mlxplat_init()
  -  Remove unused define
  -  Change mlxreg-io configuration for MSN274x systems
  -  Allow mlxreg-io driver activation for more systems
  -  Add ASIC hotplug device configuration
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Add mlxreg-fan platform driver activation
  -  Add documentation mlxreg-io sysfs interfaces
  -  Add mlxreg-io platform driver activation
 
 platform/mellanox:
  -  mlxreg-hotplug: Add hotplug hwmon uevent notification
  -  mlxreg-hotplug: Improve mechanism of ASIC health discovery
  -  Use 2-factor allocator calls
  -  Introduce support for Mellanox register access driver
 
 thinkpad_acpi:
  -  Fix multi-battery bug
  -  extend battery quirk coverage
  -  Support battery quirk
  -  Proper model/release matching
  -  Add support for calculator hotkey
 
 toshiba_acpi:
  -  Fix defined but not used build warnings
  -  Update KBD backlight LED on second gen laptops
 
 touchscreen_dmi:
  -  Rename silead_dmi to touchscreen_dmi
  -  Add touchscreen info for the Chuwi Vi10 tablet
  -  Sort entries alphabetically
  -  Rename trekstor entries
  -  Add info for the Cube KNote i1101 tablet
  -  Add info for the Onda V820w tablet
  -  Add info for the "Connect Tablet 9" tablet
  -  Add info for the ONDA V891W Dual OS tablet
 
 wmi:
  -  Do not mix pages and kmalloc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAlt9wVgACgkQmT3/83c5
 Sy3Jdg//WnEJZx7+zEsO+3dJnQGN4Fur6xhP79subRhZPFNTZ+D5vMHC9DL8ZQYx
 U8Kz1ilxCC5HuOo2S1BlzRG+h6ztMSYIFo2H8KRdygOqALEH7hoStPEGYdZcQ0qE
 6SKa4MnRw46UcGPij3f6STPiOjicPaLoUSTXZmi2dbmy6sJZMMJamvnRhezgEgJl
 rA6xvg+tKNBK2jwLpAVfLhy4Btd6LCE4EGgkYdnytOM9ByHLDsTWCZxd/9h7WjPa
 L8Zd8rftrazWF6X2tAhpXtUcMPg/D4lfL5HHaMmL9FioycQ88WqDBZN5sEWdIbaP
 OfaMbcbhCIrrHoMNdq0544IgqRQahX+m3VjSkVf3/Aj5AU0nUJMBWSpGHAs7UCSN
 8i8M2jdpVW7CVxA+4OU2l19udKrQzXutfXXhVYX0B3hKCkH7TBKax+m/ev9n2yvZ
 KoTdSJ/4bB6iGhXF8/MA6H72k0g972d4WXozbTusiBO9grqgU1EIe5bYZ4y+FkJL
 9gtK1xgtDJB7J8U14lpGC+zKhcYn1Mn3Iq4i5HD3sfnKsVGGWJIjRZsDtALD2RKT
 OQe7S8xhQWqsUZFGNflWL+8oHyXOHGD5Q8b/YI92ubriyAzh3I3Ybt/atk20vdmG
 QfKU46suOoOUwcAs00v13oo+9s9GatekXEjGgdRJ14vgzdgx3lc=
 =vRud
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - The driver for Silead touchscreen configurations has been renamed
   from silead_dmi to touchscreen_dmi since it starts supporting other
   touchscreens which require some DMI quirks

   It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
   Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.

 - Another bunch of changes is related to Mellanox platform code to
   allow user space to communicate with Mellanox for system control and
   monitoring purposes. The driver notifies user on hotplug device
   signal receiving.

 - ASUS WMI drivers recognize lid flip action on UX360, and correctly
   toggles airplane mode LED. In addition the keyboard backlight toggle
   gets support.

 - ThinkPad ACPI driver enables support for calculator key (on at least
   P52). It also has been fixed to support three characters model
   designators, which are used for modern laptops. Earlier the battery,
   marked as BAT1, on ThinkPad laptops has not been configured properly,
   which is fixed. On the opposite the multi-battery configurations now
   probed correctly.

 - Dell SMBIOS driver starts working on some Dell servers which do not
   support token interface. The regression with backlight detection has
   also been fixed. In order to support dock mode on some laptops, Intel
   virtual button driver has been fixed. The last but not least is the
   fix to Intel HID driver due to changes in Dell systems that prevented
   to use power button.

* tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits)
  platform/x86: acer-wmi: Silence "unsupported" message a bit
  platform/x86: intel_punit_ipc: fix build errors
  platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
  platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360
  platform/x86: acer-wmi: refactor function has_cap
  platform/x86: thinkpad_acpi: Fix multi-battery bug
  platform/x86: thinkpad_acpi: extend battery quirk coverage
  platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet
  platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init()
  platform/x86: mlx-platform: Remove unused define
  platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems
  platform/x86: mlx-platform: Add ASIC hotplug device configuration
  platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification
  platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery
  platform/x86: mlx-platform: Add mlxreg-fan platform driver activation
  platform/x86: dell-laptop: Fix backlight detection
  platform/x86: toshiba_acpi: Fix defined but not used build warnings
  platform/x86: thinkpad_acpi: Support battery quirk
  ...
2018-08-22 14:14:15 -07:00
Benjamin Herrenschmidt 9bd5196e5c platform/x86: acer-wmi: Silence "unsupported" message a bit
This driver prints that "Unsupported machine..." message on every boot on
ThinkPad X1 Carbon laptops (and I assume a number of other systems), which
causes graphical boots to "glitch" a bit and is rather annoying ...

Make it a pr_debug instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-22 13:40:24 +03:00
Linus Torvalds 0214f46b3a Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull core signal handling updates from Eric Biederman:
 "It was observed that a periodic timer in combination with a
  sufficiently expensive fork could prevent fork from every completing.
  This contains the changes to remove the need for that restart.

  This set of changes is split into several parts:

   - The first part makes PIDTYPE_TGID a proper pid type instead
     something only for very special cases. The part starts using
     PIDTYPE_TGID enough so that in __send_signal where signals are
     actually delivered we know if the signal is being sent to a a group
     of processes or just a single process.

   - With that prep work out of the way the logic in fork is modified so
     that fork logically makes signals received while it is running
     appear to be received after the fork completes"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
  signal: Don't send signals to tasks that don't exist
  signal: Don't restart fork when signals come in.
  fork: Have new threads join on-going signal group stops
  fork: Skip setting TIF_SIGPENDING in ptrace_init_task
  signal: Add calculate_sigpending()
  fork: Unconditionally exit if a fatal signal is pending
  fork: Move and describe why the code examines PIDNS_ADDING
  signal: Push pid type down into complete_signal.
  signal: Push pid type down into __send_signal
  signal: Push pid type down into send_signal
  signal: Pass pid type into do_send_sig_info
  signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
  signal: Pass pid type into group_send_sig_info
  signal: Pass pid and pid type into send_sigqueue
  posix-timers: Noralize good_sigevent
  signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
  pid: Implement PIDTYPE_TGID
  pids: Move the pgrp and session pid pointers from task_struct to signal_struct
  kvm: Don't open code task_pid in kvm_vcpu_ioctl
  pids: Compute task_tgid using signal->leader_pid
  ...
2018-08-21 13:47:29 -07:00
Linus Torvalds 40fafdcbcd Minor changes this time around for 4.19.
cros_ec_i2c and cros_ec_spi drivers moved from mfd
 to chrome platform.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlt8XgMACgkQHwn1ewov
 5li8MQ//RiM40heoQL4IaZbivsKlB1gT2zX/NvxfL54OX3eG35IYuyFiNKX35bPq
 suupcZq2tk5btj1Wu5ljXXExc1KS8vCDwCVA9ljZGZ97sr7ttGzwX0oVxmXFjt6J
 2L+RT40rc/H33jIAhWcxi73cwVE9Of8ao+UbnZNWxL30ddX3r6lH2NS1gHta6Mb9
 33qReMT5Z1TB+OCZd+ktkC6fS3p1LESIHY/jfu6okAxbd7auJC7q5hl6ngeGFrkx
 cLs8dKlHFWBcmdjIiY8f93vgokKxbO+vnx/0m+7uPa36vOi2RbEz+Hgy5+v1scZ0
 XOasPnY9AbJLuX+5q6ukYNVD536xlbeThsvxeN4ymjTLnlnRzLw/1+ezSTKYAFPQ
 6lJkudcLLmGDia7wH1mTjyHdU0ZsYWH9SzgUf/panX5fdy7wpPU1D4vfm36jS2wJ
 cvNXPwDZ3Pqbp24IFtFR3phgn4KNr5dXPfiHaItcPb0Fykol5tFw8tAnChWlDyCX
 fJ6U/Xj0tmQ0Awj/SEEuCWALgt8X3czAz/SSUSfLm0zSixm4kJ2gQHV1aP7dXR3f
 osxhISHPxt9+6CrnUodUYpD1QG60O+mdrx7tcs4WVPzT9Fpnp62YgUkey6SLeyhj
 itQtghxlYxJeB1hgU3Ez7KObiujA0UCrRKm5BklRV0gyM7GqSKk=
 =HNMG
 -----END PGP SIGNATURE-----

Merge tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung.

Everything but the SPDX identifier updates actually came in earlier
through the MFD merge.

* tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: chromeos_tbmc - fix SPDX identifier
2018-08-21 13:33:33 -07:00
Linus Torvalds 532c2b926d - New Drivers
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
    - Add ChromeOS EC CEC driver
    - Add ROHM BD71837 PMIC driver
 
  - New Device Support
    - Add support for Dialog Semi DA9063L PMIC variant to DA9063
    - Add support for Intel Ice Lake to Intel-PLSS-PCI
    - Add support for X-Powers AXP806 to AXP20x
 
  - New Functionality
    - Add support for USB Charging to the ChromeOS Embedded Controller
    - Add support for HDMI CEC to the ChromeOS Embedded Controller
    - Add support for HDMI CEC to Intel HDMI
    - Add support for accessory detection to Madera devices
    - Allow individual pins to be configured via DT' wlf,csnaddr-pd
    - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
 
  - Fix-ups
    - Trivial renaming/spelling fixes; cros_ec, da9063-*
    - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
    - Transition to helper macros/functions; da9063-*
    - Constify; kempld-core
    - Improve error path/messages; wm8994-core
    - Disable IRQs locally instead of relying on USB subsystem; dln2
    - Remove unused code; rave-sp
    - New exports; sec-core
 
  - Bug Fixes
    - Fix possible false I2C transaction error; arizona-core
    - Fix declared memory area size; hi655x-pmic
    - Fix checksum type; rave-sp
    - Fix incorrect default serial port configuration: rave-sp
    - Fix incorrect coherent DMA mask for sub-devices; sm501
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlt6fm8ACgkQUa+KL4f8
 d2H8qA/8CLIKKEyc3CiQIF4LqmOPn+P20gSlnNdDFGHV+ZpVryL6qKItDy76nbQS
 +GrPCmhADDn7N224ENlv4TYsB1txr7iZvyNr6W7F0fbdTLq5Fl2+6WIB3NnopPPK
 MGhzR2jikfuYGwEG+BG3efvTnrjoi+NPbNPHDdoegOiy/Q1R8PhjMKh10xWo3pgG
 0TeZVg61ztfewAiebieMixNz+ehzFKK959Lsa7neV2ZsstBbM8B44UpXmLF5JLYe
 SR1ai5etSPBLxEeTXxlE+oG+fnDWk9Eyile7z1Nwg4et9OiXdyqAXBoA+BNDj2N2
 N8vHuU79pSra+XGbka/7Kyz8sXjb4u92mJlc1wDcsCF+hX+wGEmwkEUb0S4YEtOH
 1POi4YuIq0WF1oLSgCla/Pui0OQPIZaT31XhInYLV7rAX+MPgH0cUuLDsmzcg4ut
 C6RvoSzWiGA2JVqlALExSDtAkWUoZLjYkqnPYmZwGs25xsGUqJmiw1E73HI0OWr/
 EJuKQbeq/bOmRPqbbwO7z7peZJHOt6j344VCXBdP/sB7d/lR1sEGpxC03MIogHrA
 BuiPyfDXTF1NB/+ZPBFbSG2Xhcg51yL4ddRa1sMntP6J4Ht1dW7TOpLI21Yu3eRp
 jzKnA9DRa/LPUvoR1y+C2LxDeBcT5qFMg4mZedOgio/C0vCXvus=
 =4Yj4
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...
2018-08-20 15:38:44 -07:00
Linus Torvalds d5acba26bf Char/Misc driver patches for 4.19-rc1
Here is the bit set of char/misc drivers for 4.19-rc1
 
 There is a lot here, much more than normal, seems like everyone is
 writing new driver subsystems these days...  Anyway, major things here
 are:
 	- new FSI driver subsystem, yet-another-powerpc low-level
 	  hardware bus
 	- gnss, finally an in-kernel GPS subsystem to try to tame all of
 	  the crazy out-of-tree drivers that have been floating around
 	  for years, combined with some really hacky userspace
 	  implementations.  This is only for GNSS receivers, but you
 	  have to start somewhere, and this is great to see.
 Other than that, there are new slimbus drivers, new coresight drivers,
 new fpga drivers, and loads of DT bindings for all of these and existing
 drivers.
 
 Full details of everything is in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
 cvW7a+McOoKz/MGmEKsi
 =TNfn
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...
2018-08-18 11:04:51 -07:00
Randy Dunlap 340fd4cff4 platform/x86: intel_punit_ipc: fix build errors
Fix build errors by #including <linux/io.h>.

../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_read_status':
../drivers/platform/x86/intel_punit_ipc.c:55:2: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]
  return readl(ipcdev->base[type][BASE_IFACE]);
../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_write_cmd':
../drivers/platform/x86/intel_punit_ipc.c:60:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
  writel(cmd, ipcdev->base[type][BASE_IFACE]);

Fixes: 447ae31667 ("x86: Don't include linux/irq.h from asm/hardirq.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zha Qipeng <qipeng.zha@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-17 13:55:13 +03:00
Linus Torvalds 4e31843f68 pci-v4.19-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlt1f9AUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxbdhAArnhRvkwOk4m4/LCuKF6HpmlxbBNC
 TjnBCenNf+lFXzWskfDFGFl/Wif4UzGbRTSCNQrwMzj3Ww3f/6R2QIq9rEJvyNC4
 VdxQnaBEZSUgN87q5UGqgdjMTo3zFvlFH6fpb5XDiQ5IX/QZeXeYqoB64w+HvKPU
 M+IsoOvnA5gb7pMcpchrGUnSfS1e6AqQbbTt6tZflore6YCEA4cH5OnpGx8qiZIp
 ut+CMBvQjQB01fHeBc/wGrVte4NwXdONrXqpUb4sHF7HqRNfEh0QVyPhvebBi+k1
 kquqoBQfPFTqgcab31VOcQhg70dEx+1qGm5/YBAwmhCpHR/g2gioFXoROsr+iUOe
 BtF6LZr+Y8cySuhJnkCrJBqWvvBaKbJLg0KMbI+7p4o9MZpod2u7LS5LFrlRDyKW
 3nz3o+b1+v3tCCKVKIhKo0ljolgkweQtR1f6KIHvq93wBODHVQnAOt9NlPfHVyks
 ryGBnOhMjoU5hvfexgIWFk9Ph9MEVQSffkI+TeFPO/tyGBfGfQyGtESiXuEaMQaH
 FGdZHX2RLkY3pWHOtWeMzRHzOnr2XjpDFcAqL3HBGPdJ30K3Umv3WOgoFe2SaocG
 0gaddPjKSwwM4Sa/VP+O5cjGuzi7QnczSDdpYjxIGZzBav32hqx4/rsnLw7bHH8y
 XkEme7cYJc8MGsA=
 =2Dmn
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...
2018-08-16 09:21:54 -07:00
Linus Torvalds 71f3a82fab media updates for v4.19-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbdGisAAoJEAhfPr2O5OEVmXcQAIe+wWHfAFwFDCqRGvG7yHIV
 q3Rf6bqYE/IK++sSX9qrCmPC1jXsw6oXjaYqjtdplLb6GBBkNdKo6neGtARV1phB
 Moj0JVmFwvnq6yMBZl4TFIZIZHIlfXIe/Ac6b9h5aiL1bGUdnukLhSnGVnoWteVv
 F6BRAhH/PDIf7xUpxchEic7HbwnWDWI51ALeDWZQCv5SkNgBUBrLDumWr7b2YCWF
 BcNfC14fNN1Jk4Hi9NpS7VCC4Nxvxn+D3iFsVa10Ur/A8EPApIlj+8nu/CDA8p4c
 cJa8ImvaKhK0PAfciKMi5RBs/5r5BFRlrmLADkyVz8pmz5AQqjHot/TGoC22LqaN
 h0T9lTKEmFAE8CYFQhcOfb6qcR6bfnM6yyVjeCrnAQ3Fw9TgESiPbPE7BpgnxoTU
 i3h7a5WHYs4xjkMByJUYda1GhahPD82eJJp8l4iIQ2IMlTZbrEmLFmg13WNO3950
 a+dy3HqpXUd2EYwFn9CVFzjTzWKE+63obQWIxLFWJWRirqr5XKbTmB7nPLeik6Os
 kPmn8t0eKig76SYiJ2rhKgTMUB1rXjtBYtqP/f02FYN0WSZCEIs7oKMb/SoVfTlP
 2rF6k2ZPTzB2ZJp3RzNRX/+/39f04i26QzeEwwQ6/8daxSna3YlKuLMvHzJ5UuFp
 q28aN8hD5eXU1IEWHtvH
 =ClJZ
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x

 - new sensor drivers: ak7375, ov2680 and rj54n1cb0c

 - an old soc-camera sensor driver converted to the V4L2 framework:
   mt9v111

 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm

 - some cleanups at cx25821, removing legacy unused code

 - some improvements at ddbridge driver

 - new platform driver: vicodec

 - some DVB API cleanups, removing ioctls and compat code for old
   out-of-tree drivers that were never merged upstream

 - improvements at DVB core to support frontents that support both
   Satellite and non-satellite delivery systems

 - got rid of the unused VIDIOC_RESERVED V4L2 ioctl

 - some cleanups/improvements at gl861 ISDB driver

 - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645,
   and smiapp sensor drivers

 - fixes at em28xx to support dual TS devices

 - some cleanups at V4L2/VB2 locking logic

 - some API improvements at media controller

 - some cec core and drivers improvements

 - some uvcvideo improvements

 - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda,
   reneseas-ceu, imx, vsp1, venus, camss

 - lots of other cleanups and fixes

* tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits)
  Revert "media: vivid: shut up warnings due to a non-trivial logic"
  siano: get rid of an unused return code for debugfs register
  media: isp: fix a warning about a wrong struct initializer
  media: radio-wl1273: fix return code for the polling routine
  media: s3c-camif: fix return code for the polling routine
  media: saa7164: fix return codes for the polling routine
  media: exynos-gsc: fix return code if mutex was interrupted
  media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API
  media: xc4000: get rid of uneeded casts
  media: drxj: get rid of uneeded casts
  media: tuner-xc2028: don't use casts for printing sizes
  media: cleanup fall-through comments
  media: vivid: shut up warnings due to a non-trivial logic
  media: rtl28xxu: be sure that it won't go past the array size
  media: mt9v111: avoid going past the buffer
  media: vsp1_dl: add a description for cmdpool field
  media: sta2x11: add a missing parameter description
  media: v4l2-mem2mem: add descriptions to MC fields
  media: i2c: fix warning in Aptina MT9V111
  media: imx: shut up a false positive warning
  ...
2018-08-15 18:29:14 -07:00
Ike Panhc 56c9bba135 platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
Lenovo Y520-15IKBM and Y720-15IKBM are another Lenovo models
without physical radio switch and ideapad-laptop reports it
is hard blocked. Add them into no_hw_rfkill to unlock wireless.

BugLink: https://bugs.launchpad.net/bugs/1723612
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 13:17:48 +03:00
Aleh Filipovich 880b29ac10 platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360
Add entry to WMI keymap for lid flip event on Asus UX360.

On Asus Zenbook ux360 flipping lid from/to tablet mode triggers
keyscan code 0xfa which cannot be handled and results in kernel
log message "Unknown key fa pressed".

Signed-off-by: Aleh Filipovich<aleh@appnexus.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 13:17:48 +03:00
Gustavo A. R. Silva aa7d16bfa3 platform/x86: acer-wmi: refactor function has_cap
Refactor function has_cap in order to avoid returning integer
values, when instead it should return booleans.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 13:17:48 +03:00
Thomas Weißschuh d22296d9c3 platform/x86: thinkpad_acpi: Fix multi-battery bug
The struct containing the supported operations for all batteries is
being zeroed on each battery probe.  This prevents all other batteries
except the lastly probed one from being configured.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 12:55:32 +03:00
Jouke Witteveen 6640ee6289 platform/x86: thinkpad_acpi: extend battery quirk coverage
Based on bug reports and a web search for
    "Thinkpad_acpi: Error probing battery 2"
four more models were found that require the battery quirk:
Lenovo B5400, Thinkpad 11e, Thinkpad 11e gen 3, Thinkpad 13 gen 3.

Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Tested-by: James Cheshire <jermizzey@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 12:55:32 +03:00
youling257 cda5915d15 platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet
Add touchscreen info for the Cube KNote i1101 tablet.

Reported-and-tested-by: lkongl <lkongl@163.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 12:55:32 +03:00
Wei Yongjun 207da7128a platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init()
The return value from platform_device_register_resndata() is not checked
correctly. The test is done against a wrong variable. This patch fix it.

Fixes: 0378123c58 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-08-15 12:55:32 +03:00
Linus Torvalds 2c20443ec2 ACPI updates for 4.19-rc1
- Revert two ACPICA commits that are not needed any more (Erik
    Schmauss).
 
  - Rework property graph support in the ACPI device properties
    framework to make it behave more like the analogous DT code
    and update the documentation of it (Sakari Ailus).
 
  - Change the default ACPI device status after initialization
    to ACPI_STA_DEFAULT instead of 0 (Hans de Goede).
 
  - Add a special platform driver for enumerating multiple I2C devices
    hooked up to the same object in the ACPI tables (Hans de Goede).
 
  - Fix the ACPI battery driver to avoid reporting full capacity on
    systems without support for that and clean it up (Hans de Goede,
    Dmitry Rozhkov, Lucas Rangit Magasweran).
 
  - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma,
    Mika Westerberg).
 
  - Add the touchscreen on Dell Venue Pro 7139 to the list of "always
    present" devices to make it work (Tristian Celestin).
 
  - Revert a special tables handling quirk for Dell XPS 9570 and
    Precision M5530 which is not needed any more (Kai Heng Feng).
 
  - Add support for a new OEM _OSI string to allow system vendors to
    work around issues with NVidia HDMI audio (Alex Hung).
 
  - Prevent the ACPI button driver from reporting excessive system
    wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap).
 
  - Clean up two minor code style issues in the ACPI core and GHES
    handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbcqQyAAoJEILEb/54YlRxpeIP/i+eB9sq+Pwwb6rpvrcx8JkQ
 cWYbjBQPZLsqqHBQDlwVC4I5o0gn6OhRsQlgSQdxheXA+G6kRtbh942oPptIH7NY
 vF0g0OYFZGhahjgkLyBtXlacMi+A+aSFkZ6lc4Ie4x/nFAELumjpYtef4v09Ecme
 p1G5wz5KYv+47t0DHl+Lb1NglIHsLKtiNMiy9QHyXl3oxrcbW7VIG5o8INw6TgIg
 /yaYOAzU8UMjnhcn6gDgrD+OKdux8jt3yAaHW/90/zBp4qbAJ9fp8zhb5LP7M0sE
 r63pC2qUq7NDKAl99sMuX5I2jSub9d2yJcjcOSyt+FnB/ErsBCbJGm5rEkK4sRHv
 wkV8ybHdq+PkOblR1ob5LMvDXcTlsVTMPonS/oPbEH4J7+jbJjU4vxZxblJGyan6
 6GeiOoI6tMyZB7DBiTJH4EgwcNu6GESfPURnyUqRGCUswS7ocQBmRdSbsf6hRgn9
 loOZnYXb+PPIxYHH9deFsej71d6En9bMUyUZmOGeLWZ+NSW69XISgnke0tmtgvlZ
 pj3zJ7Egnw4SBms2gL/VtPEulxJ2MxScju1RbKMpjP86oIDrO4u3pD8tYSTouSSG
 P3AjFXVqpKMTmfVUnbqu/Avg7GsuDHcv8lgUbY8BQGLXaZVni2oJBtcwc8Ca0lJg
 8q0xTvX+YEnuOwgvNoNz
 =5mW8
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These revert two ACPICA commits that are not needed any more, rework
  the property graphs support in ACPI to be more aligned with the
  analogous DT code, add some new quirks and remove one that isn't
  needed any more, add a special platform driver to enumerate multiple
  I2C devices hooked up to the same device object in the ACPI tables and
  update the battery and button drivers.

  Specifics:

   - Revert two ACPICA commits that are not needed any more (Erik
     Schmauss).

   - Rework property graph support in the ACPI device properties
     framework to make it behave more like the analogous DT code and
     update the documentation of it (Sakari Ailus).

   - Change the default ACPI device status after initialization to
     ACPI_STA_DEFAULT instead of 0 (Hans de Goede).

   - Add a special platform driver for enumerating multiple I2C devices
     hooked up to the same object in the ACPI tables (Hans de Goede).

   - Fix the ACPI battery driver to avoid reporting full capacity on
     systems without support for that and clean it up (Hans de Goede,
     Dmitry Rozhkov, Lucas Rangit Magasweran).

   - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika
     Westerberg).

   - Add the touchscreen on Dell Venue Pro 7139 to the list of "always
     present" devices to make it work (Tristian Celestin).

   - Revert a special tables handling quirk for Dell XPS 9570 and
     Precision M5530 which is not needed any more (Kai Heng Feng).

   - Add support for a new OEM _OSI string to allow system vendors to
     work around issues with NVidia HDMI audio (Alex Hung).

   - Prevent the ACPI button driver from reporting excessive system
     wakeup events and clean it up (Ravi Chandra Sadineni, Randy
     Dunlap).

   - Clean up two minor code style issues in the ACPI core and GHES
     handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)"

* tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
  platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
  ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
  ACPI / scan: Create platform device for fwnodes with multiple i2c devices
  ACPI / scan: Initialize status to ACPI_STA_DEFAULT
  ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
  ACPI: bus: Fix a pointer coding style issue
  arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
  ACPI / scan: Add static attribute to indirect_io_hosts[]
  ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
  ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd
  ACPI / battery: get rid of negations in conditions
  ACPI / battery: use specialized print macros
  ACPI / battery: reorder headers alphabetically
  ACPI / battery: drop inclusion of init.h
  ACPI: battery: remove redundant old_present check on insertion
  ACPI: property: graph: Update graph documentation to use generic references
  ACPI: property: graph: Improve graph documentation for port/ep numbering
  ACPI: property: graph: Fix graph documentation
  ACPI: property: Update documentation for hierarchical data extension 1.1
  ACPI: property: Document key numbering for hierarchical data extension refs
  ...
2018-08-14 13:39:52 -07:00