This code is not being built as a module by anyone:
drivers/pci/host/Kconfig:config PCI_IMX6
drivers/pci/host/Kconfig: bool "Freescale i.MX6 PCIe controller"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Richard Zhu <Richard.Zhu@freescale.com>
CC: Lucas Stach <l.stach@pengutronix.de>
I.MX6+ has a dedicated bit for resetting PCIe core, which should be used
instead of a regular reset sequence since using the latter will hang the
SoC.
This commit is based on c34068d48273e24d392d9a49a38be807954420ed from
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Use enumerated type instead of a boolean flag to specify the variant of
the PCIe IP block (6Q, 6SX, etc). This patch has zero functional impact,
however it makes the code easier to extend for the case of more than 2
possible variants of an IP block (of which there are).
[bhelgaas: rewrap comment, remove extra blank line]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Freescale has stated [1] that the LVDS clock source of the IMX6 does not
pass the PCI Gen2 clock jitter test, therefore unless an external Gen2
compliant external clock source is present and supplied back to the IMX6
PCIe core via LVDS CLK1/CLK2 you can not claim Gen2 compliance.
Add a DT property to specify Gen1 vs Gen2 and check this before allowing a
Gen2 link.
We default to Gen1 if the property is not present because at this time
there are no IMX6 boards in mainline that 'input' a clock on LVDS
CLK1/CLK2.
In order to be Gen2 compliant on IMX6 you need to:
- Have a Gen2 compliant external clock generator and route that clock back
to either LVDS CLK1 or LVDS CLK2 as an input (see IMX6SX-SabreSD
reference design).
- Specify this clock in the PCIe node in the DT (i.e.,
IMX6QDL_CLK_LVDS1_IN or IMX6QDL_CLK_LVDS2_IN instead of
IMX6QDL_CLK_LVDS1_GATE which configures it as a CLK output).
[1] https://community.freescale.com/message/453209
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Zhu Richard <Richard.Zhu@freescale.com>
CC: Akshay Bhat <akshay.bhat@timesys.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Shawn Guo <shawnguo@kernel.org>
Currently the reset-gpio DT property which controls the PCI bus device
reset signal defaults to active-low reset sequence (L=reset state,
H=operation state) plus the code in reset function isn't GPIO polarity
aware - it doesn't matter if the defined reset-gpio is active-low or
active-high, it will always result into active-low reset sequence.
I've tried to fix it properly and change the reset-gpio reset sequence to
be polarity-aware, but this patch has been accepted and then reverted as it
has introduced few backward incompatible issues:
1. Some DTBs, for example, imx6qdl-sabresd, don't define reset-gpio
polarity correctly:
reset-gpio = <&gpio7 12 0>;
which means that it's defined as active-high, but in reality it's
active-low; thus it wouldn't work without a DTS fix.
2. The logic in the reset function is inverted:
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0)
msleep(100);
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
so even if some of the i.MX6 boards had reset-gpio polarity defined
correctly in their DTSes, they would stop working.
As we can't break old DTBs, we can't fix them, so we need to introduce this
new DT reset-gpio-active-high boolean property so we can support boards
with active-high reset sequence.
This active-high reset sequence is for example needed on Apalis SoMs, where
GPIO1_IO28, used to PCIe reset is not connected directly to PERST# PCIe
signal, but it's ORed with RESETBMCU coming off the PMIC, and thus is
inverted, active-high.
Tested-by: Tim Harvey <tharvey@gateworks.com> # Gateworks Ventana boards (which have active-low PERST#)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Add initial PCIe support for the imx6 SoC derivate imx6sx. PCI MSI support
is untested as the necessary suspend/resume quirk is not included in this
patch.
This patch is heavily based on patches by Richard Zhu.
[bhelgaas: factor out refclk enable, fix adjacent typos in imx6q-pcie.txt]
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Factor out ref clock enable to make it cleaner to add imx6sx support. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Commit 5c5fb40de8 ("PCI: imx6: Add support for active-low reset GPIO")
cause regressions on some boards like MX6 Gateworks Ventana, for example.
The reason for the breakage is that this commit sets the GPIO polarity in
the wrong logic level.
Also, the commit log is wrong because active-low reset GPIO is what the
driver used to support since the beginning.
So keep the old behavior that ignores the GPIO polarity specified in the
device tree and treat the PCI reset GPIO as active-low.
Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Tim Harvey <tharvey@gateworks.com> # Gateworks Ventana
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
CC: stable@vger.kernel.org # v4.5+
* pci/host-designware:
PCI: designware: Add driver for prototyping kits based on ARC SDP
PCI: designware: Add default link up check if sub-driver doesn't override
PCI: designware: Add generic dw_pcie_wait_for_link()
ARC: Add PCI support
Several DesignWare-based drivers (dra7xx, exynos, imx6, keystone, qcom, and
spear13xx) had similar loops waiting for the link to come up.
Add a generic dw_pcie_wait_for_link() for use by all these drivers so the
waiting is done consistently, e.g., always using usleep_range() rather than
mdelay() and using similar timeouts and retry counts.
Note that this changes the Keystone link training/wait for link strategy,
so we initiate link training, then wait longer for the link to come up
before re-initiating link training.
[bhelgaas: changelog, split into its own patch, update pci-keystone.c, pcie-qcom.c]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
The settings in GPR8 are dependent upon the particular layout of the
hardware platform. As such, they should be configurable via the device
tree.
Look up PHY Tx driver settings from the device tree. Fall back to the
original hard-coded values if they are not specified in the device tree.
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
imx6_pcie_link_up() previously used usleep_range() to wait for the link to
come up. Since it may be called while holding the config spinlock, the
sleep causes a "BUG: scheduling while atomic" error.
Instead of waiting for the link to come up in imx6_pcie_link_up(), do the
waiting in imx6_pcie_wait_for_link(), where we're not holding a lock and
sleeping is allowed.
[bhelgaas: changelog, references to bugzilla and f95d3ae771]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100031
Fixes: f95d3ae771 ("PCI: imx6: Wait for retraining")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove the remnants of the workaround for erratum ERR005184 which was never
completely implemented. The checks alone don't carry any value as we don't
act properly on the result.
A workaround should be added to the lane speed change in establish_link
later.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This adds the PHY reset into a common error path of
imx6_pcie_establish_link(), deduplicating some of the debug prints. Also
reduce the severity of the "no-link" message in the one place where it is
expected to be hit when no peripheral is attached.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move imx6_pcie_reset_phy() near the other PHY related functions in the
file. This is a cosmetic change, but also allows to do the following
changes without introducing needless forward declarations.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/trivial:
PCI: shpchp: Constify hpc_ops structure
PCI: Use kobj_to_dev() instead of open-coding it
PCI: Use to_pci_dev() instead of open-coding it
PCI: Fix all whitespace issues
PCI/MSI: Fix typos in <linux/msi.h>
Fix all whitespace issues (missing or needed whitespace) in all files in
drivers/pci. Code is compiled with allyesconfig before and after code
changes and objects are recorded and checked with objdiff and they are not
changed after this commit.
Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On -RT and if kernel is booting with "threadirqs" cmd line parameter,
PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler())
will be forced threaded and, as result, will generate warnings like this:
WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174()
irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts
Backtrace:
(warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40)
(warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174)
(handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8)
(handle_irq_event) from (handle_simple_irq+0x90/0x118)
(handle_simple_irq) from (generic_handle_irq+0x30/0x44)
(generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c)
(dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c)
(irq_forced_thread_fn) from (irq_thread+0x128/0x204)
This happens because all of them invoke generic_handle_irq() from the
requested handler. generic_handle_irq() grabs raw_locks and thus needs to
run in raw-IRQ context.
This issue was originally reproduced on TI dra7-evem, but, as was
identified during discussion [1], other hosts can also suffer from this
issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers
IRQF_NO_THREAD explicitly.
[1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com
[bhelgaas: add stable tag, fix typos]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6)
CC: stable@vger.kernel.org
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Kukjin Kim <kgene@kernel.org>
CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Richard Zhu <Richard.Zhu@freescale.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: Simon Horman <horms@verge.net.au>
CC: Pratyush Anand <pratyush.anand@gmail.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We previously used of_get_named_gpio(), which ignores the OF flags cell, so
the reset GPIO defaulted to "active high." This doesn't work on the Toradex
Apalis SoM with Ixora base board, which has an active-low reset GPIO.
Use devm_gpiod_get_optional() instead so we pay attention to the active
high/low flag. This also adds support for GPIOs described via ACPI.
[bhelgaas: changelog]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
We are in a context where we can sleep, and the PCIe reset gpio may be on
an I2C expander. Use the cansleep() variant when setting the GPIO value.
Based on a patch from Russell King for pci-mvebu.c.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Add a #define for PCIE_PHY_RX_ASIC_OUT_VALID and use it instead of a
hardcoded value.
[bhelgaas: drop PCIE_PHY_DEBUG_R0_LTSSM_MASK; updated in future patch]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
When devm_request_irq() fails, imx6_add_pcie_port() should return the real
error code instead of always returning -ENODEV.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Simplify a trivial if-return sequence by combining it with a preceding
function call.
The semantic patch that makes this change is available in
scripts/coccinelle/misc/simple_return.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Lucas Stach <l.stach@pengutronix.de>
Use "u32", not "uint32_t", for consistency. Use "tmp", not "temp", for
consistency within the driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
Currently, the timeout is never detected as count has a value of -1 if a
timeout happens, but the code is checking for 0. Also, this patch removes
the unneeded final wait if a timeout occurs.
[bhelgaas: reworked starting from http://lkml.kernel.org/r/1433543864-7252-1-git-send-email-troy.kisky@boundarydevices.com]
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
All the DesignWare-based host drivers loop waiting for the link to come up,
but they do it several ways that are needlessly different.
Wait for the link to come up in a consistent style across all the
DesignWare drivers. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Rename imx6_pcie_start_link() to imx6_pcie_establish_link() to follow the
convention of other DesignWare-based host drivers. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
This patch fixes the following checkpatch error:
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For boards without a reset GPIO we skip the delay between enabling the
pcie_ref_clk and touching the RC registers for configuration. This hangs
the system if there isn't a proper delay to ensure the clocks are settled
in the DW PCIe core.
Also iMX6Q always needs an additional 10us delay to make sure the reset is
propagated through the core, as we don't have an explicitly controlled
reset input on this SoC.
This fixes a problem with 3fce0e882f ("PCI: imx6: Delay enabling
reference clock for SS until it stabilizes"): the kernel doesn't boot on
systems that don't pass the PCI GPIO reset in the DTB. This regression
affects mx6 nitrogen boards.
[bhelgaas: add regression info in changelog]
Fixes: 3fce0e882f ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes")
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Richard Zhu <richard.zhu@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable
for SS function) must remain deasserted until the reference clock is
running at the appropriate frequency.
Delay enabling the reference clock for the SS function until it has
stabilized. This prevents a high link failure rate (>5%) on certain IMX6
boards at various temperatures.
[bhelgaas: reword changelog slightly]
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
This effectively reverts f216f57ffe ("PCI: imx6: Probe the PCIe in
fs_initcall()") as the resource allocation issue that prevented the driver
from working properly at module_initcall level is now fixed in
pcie-designware.c.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
This fixes a boot hang observed when the bootloader already enabled the
PCIe link for its own use. The fundamental problem is that Freescale
forgot to wire up the core reset, so software doesn't have a sane way to
get the core into a defined state.
According to the DW PCIe core reference manual, configuration of the core
may only happen when the LTSSM is disabled, so this is one of the first
things we need to do. Apparently this isn't safe to do when the LTSSM is in
any state other than "detect" as we observe an instant machine hang when
trying to do so while the link is already up.
As a workaround, force LTSSM into detect state right before hitting the
disable switch. There is still a race window because the LTSSM may
transition out of "detect" before we can disable it, but it's the best
we can do for now.
[bhelgaas: mention race window]
Link: http://lkml.kernel.org/r/1406830565-23450-3-git-send-email-l.stach@pengutronix.de
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
* pci/host-designware:
PCI: designware: Remove unnecessary use of 'conf_lock' spinlock
PCI: designware: Use new OF interrupt mapping when possible
PCI: designware: Fix iATU programming for cfg1, io and mem viewport
PCI: designware: Fix comment for setting number of lanes
* pci/host-imx6:
PCI: designware: Split Exynos and i.MX bindings
* pci/host-mvebu:
PCI: mvebu: Use '%pa' for printing 'phys_addr_t' type
PCI: mvebu: Remove unnecessary use of 'conf_lock' spinlock
PCI: mvebu: split PCIe BARs into multiple MBus windows when needed
bus: mvebu-mbus: allow several windows with the same target/attribute
bus: mvebu-mbus: Avoid setting an undefined window size
PCI: mvebu: fix off-by-one in the computed size of the mbus windows
* pci/host-tegra:
PCI: tegra: Use new OF interrupt mapping when possible
This patch adds support for Message Signaled Interrupts in the imx6-pcie
driver.
Signed-off-by: Harro Haan <hrhaan@gmail.com>
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
They are dropped with the new binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
We don't need this anymore. The IRQs are now properly mapped through the
DT.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
As defined in the new binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
imx6_add_pcie_port() is called only from from imx6_pcie_probe() which is
annotated with __init. Thus it makes sense to annotate
imx6_add_pcie_port() with __init to avoid section mismatch warnings.
[bhelgaas: changelog]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sean Cross <xobs@kosagi.com>
Serialization of configuration accesses is provided by 'pci_lock' in
drivers/pci/access.c thus making the driver's 'conf_lock' superfluous.
Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Richard Zhu <r65037@freescale.com>
This patch handles the case where the PCIe link is up and running, yet
drops into the LTSSM training mode. The link spends short time in the LTSSM
training mode, but the current code can misinterpret it as the link being
stalled. Waiting for the LTSSM training to complete fixes the issue.
Quoting Sascha:
This is broken since commit 7f9f40c01c ('PCI: imx6: Report "link up"
only after link training completes').
The designware driver changes the PORT_LOGIC_SPEED_CHANGE bit in
dw_pcie_host_init() which causes the link to be retrained. During the
next call to dw_pcie_rd_conf() the link is then reported being down and
the function returns PCIBIOS_DEVICE_NOT_FOUND resulting in nonfunctioning
PCIe.
Fixes: 7f9f40c01c (PCI: imx6: Report "link up" only after link training completes)
Tested-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
This patch first forces the link into Gen1 mode before starting up the link
and, only after the link is up, start negotiating possible Gen2 mode
operation. This is because without such sequence, some PCIe switches are
not detected at all.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Frank Li <lznuaa@gmail.com>
Cc: Harro Haan <hrhaan@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Siva Reddy Kallam <siva.kallam@samsung.com>
Cc: Srikanth T Shivanand <ts.srikanth@samsung.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Split the function that waits for the PCIe link to come up from the rest if
the host init function. We will find this change useful in the subsequent
patch, since this will be called twice then.
No functional change.
[bhelgaas: remove useless "return;"]
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Frank Li <lznuaa@gmail.com>
Cc: Harro Haan <hrhaan@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Siva Reddy Kallam <siva.kallam@samsung.com>
Cc: Srikanth T Shivanand <ts.srikanth@samsung.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Paul Gortmaker