Clean up: The generic rq_connect_cookie is sufficient to detect RPC
Call retransmission.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: We need to check only that the value does not exceed the
range of the u8 field it's going into.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
With v4.15, on one of my NFS/RDMA clients I measured a nearly
doubling in the latency of small read and write system calls. There
was no change in server round trip time. The extra latency appears
in the whole RPC execution path.
"git bisect" settled on commit ccede75985 ("xprtrdma: Spread reply
processing over more CPUs") .
After some experimentation, I found that leaving the WQ bound and
allowing the scheduler to pick the dispatch CPU seems to eliminate
the long latencies, and it does not introduce any new regressions.
The fix is implemented by reverting only the part of
commit ccede75985 ("xprtrdma: Spread reply processing over more
CPUs") that dispatches RPC replies specifically on the CPU where the
matching RPC call was made.
Interestingly, saving the CPU number and later queuing reply
processing there was effective _only_ for a NFS READ and WRITE
request. On my NUMA client, in-kernel RPC reply processing for
asynchronous RPCs was dispatched on the same CPU where the RPC call
was made, as expected. However synchronous RPCs seem to get their
reply dispatched on some other CPU than where the call was placed,
every time.
Fixes: ccede75985 ("xprtrdma: Spread reply processing over ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
server xdr decoding (with an eye towards eliminating a data copy in the
RDMA case).
I did some refactoring of the delegation code in preparation for
eliminating some delegation self-conflicts and implementing write
delegations.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaxi5LAAoJECebzXlCjuG+deAQAL9NHsv6bIydkE6wX305c/bR
gm73yryF1kfOuHmiLq15mrljiKyCEbRSPqzzM8k2TkywHhyvOLEjxHbhZnwDyQec
DaZUzWLKNkK64UFXEvTKyNwfGObwsGQ+QLkV7N9mF3Ps9M9/u2vMHKQypvA9hJ7z
DGN7MO7Ud7N0Viu03vp4m+p7gypoWGFj6Sh1QAkR/7TE/supcS+qqOWU4vLpYFhu
/l2gJym59FWqHajwqs0Qu9LpHfsEx5HySZbj7GczbGRMka3y/AnjgnngcriP+63B
ZcPpqSdD4Yeq1OJklU5Wicy+u54rFkA9VE1EArrC9RAEwav6iMhhhaESpRH2JFJE
SO7cgUSCb2+65XgeSBfDygn+09PcN+eRF3sxXkQpHKsozQOH+qdyr7F4/ePunwi8
Ah7pIkczRUrj7gMmlNOg97wpHbffO4YnpRESA934qf7MMHRQwDsEkl512kFAyadZ
g1DI3iByfUpBQvRWJSLasyjyWUqRZDMmyO3yi3i/08sMI3XE1IOWpNkJAooNYC1X
1FCDn1VXlTdcmC8yw6Da1L05PCVf25tSjpYQZ6r25KtrVi9iBOGV741vmyVMvDEw
OwUuVatRd+AY+YJ6iUraNH4SlnHWZ/qKDFJECWbrG/4uUHyo8FIXGAgL8RgtbS8+
fQeRjaDyhHD0XH7TJ10x
=fJI1
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Chuck Lever did a bunch of work on nfsd tracepoints, on RDMA, and on
server xdr decoding (with an eye towards eliminating a data copy in
the RDMA case).
I did some refactoring of the delegation code in preparation for
eliminating some delegation self-conflicts and implementing write
delegations"
* tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linux: (40 commits)
nfsd: fix incorrect umasks
sunrpc: remove incorrect HMAC request initialization
NFSD: Clean up legacy NFS SYMLINK argument XDR decoders
NFSD: Clean up legacy NFS WRITE argument XDR decoders
nfsd: Trace NFSv4 COMPOUND execution
nfsd: Add I/O trace points in the NFSv4 read proc
nfsd: Add I/O trace points in the NFSv4 write path
nfsd: Add "nfsd_" to trace point names
nfsd: Record request byte count, not count of vectors
nfsd: Fix NFSD trace points
svc: Report xprt dequeue latency
sunrpc: Report per-RPC execution stats
sunrpc: Re-purpose trace_svc_process
sunrpc: Save remote presentation address in svc_xprt for trace events
sunrpc: Simplify trace_svc_recv
sunrpc: Simplify do_enqueue tracing
sunrpc: Move trace_svc_xprt_dequeue()
sunrpc: Update show_svc_xprt_flags() to include recently added flags
svc: Simplify ->xpo_secure_port
sunrpc: Remove unneeded pointer dereference
...
make_checksum_hmac_md5() is allocating an HMAC transform and doing
crypto API calls in the following order:
crypto_ahash_init()
crypto_ahash_setkey()
crypto_ahash_digest()
This is wrong because it makes no sense to init() the request before a
key has been set, given that the initial state depends on the key. And
digest() is short for init() + update() + final(), so in this case
there's no need to explicitly call init() at all.
Before commit 9fa68f6200 ("crypto: hash - prevent using keyed hashes
without setting key") the extra init() had no real effect, at least for
the software HMAC implementation. (There are also hardware drivers that
implement HMAC-MD5, and it's not immediately obvious how gracefully they
handle init() before setkey().) But now the crypto API detects this
incorrect initialization and returns -ENOKEY. This is breaking NFS
mounts in some cases.
Fix it by removing the incorrect call to crypto_ahash_init().
Reported-by: Michael Young <m.a.young@durham.ac.uk>
Fixes: 9fa68f6200 ("crypto: hash - prevent using keyed hashes without setting key")
Fixes: fffdaef2eb ("gss_krb5: Add support for rc4-hmac encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move common code in NFSD's legacy SYMLINK decoders into a helper.
The immediate benefits include:
- one fewer data copies on transports that support DDP
- consistent error checking across all versions
- reduction of code duplication
- support for both legal forms of SYMLINK requests on RDMA
transports for all versions of NFS (in particular, NFSv2, for
completeness)
In the long term, this helper is an appropriate spot to perform a
per-transport call-out to fill the pathname argument using, say,
RDMA Reads.
Filling the pathname in the proc function also means that eventually
the incoming filehandle can be interpreted so that filesystem-
specific memory can be allocated as a sink for the pathname
argument, rather than using anonymous pages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move common code in NFSD's legacy NFS WRITE decoders into a helper.
The immediate benefit is reduction of code duplication and some nice
micro-optimizations (see below).
In the long term, this helper can perform a per-transport call-out
to fill the rq_vec (say, using RDMA Reads).
The legacy WRITE decoders and procs are changed to work like NFSv4,
which constructs the rq_vec just before it is about to call
vfs_writev.
Why? Calling a transport call-out from the proc instead of the XDR
decoder means that the incoming FH can be resolved to a particular
filesystem and file. This would allow pages from the backing file to
be presented to the transport to be filled, rather than presenting
anonymous pages and copying or flipping them into the file's page
cache later.
I also prefer using the pages in rq_arg.pages, instead of pulling
the data pages directly out of the rqstp::rq_pages array. This is
currently the way the NFSv3 write decoder works, but the other two
do not seem to take this approach. Fixing this removes the only
reference to rq_pages found in NFSD, eliminating an NFSD assumption
about how transports use the pages in rq_pages.
Lastly, avoid setting up the first element of rq_vec as a zero-
length buffer. This happens with an RDMA transport when a normal
Read chunk is present because the data payload is in rq_arg's
page list (none of it is in the head buffer).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Record the time between when a rqstp is enqueued on a transport
and when it is dequeued. This includes how long the rqstp waits on
the queue and how long it takes the kernel scheduler to wake a
nfsd thread to service it.
The svc_xprt_dequeue trace point is altered to include the number
of microseconds between xprt_enqueue and xprt_dequeue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Introduce a mechanism to report the server-side execution latency of
each RPC. The goal is to enable user space to filter the trace
record for latency outliers, build histograms, etc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, trace_svc_process has two call sites:
1. Just after a call to svc_send. svc_send already invokes
trace_svc_send with the same arguments just before returning
2. Just before a call to svc_drop. svc_drop already invokes
trace_svc_drop with the same arguments just after it is called
Therefore trace_svc_process does not provide any additional
information not already provided by these other trace points.
However, it would be useful to record the incoming RPC procedure.
So reuse trace_svc_process for this purpose.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
TP_printk defines a format string that is passed to user space for
converting raw trace event records to something human-readable.
My user space's printf (Oracle Linux 7), however, does not have a
%pI format specifier. The result is that what is supposed to be an
IP address in the output of "trace-cmd report" is just a string that
says the field couldn't be displayed.
To fix this, adopt the same approach as the client: maintain a pre-
formated presentation address for occasions when %pI is not
available.
The location of the trace_svc_send trace point is adjusted so that
rqst->rq_xprt is not NULL when the trace event is recorded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be a lot of value in calling trace_svc_recv
in the failing case.
1. There are two very common cases: one is the transport is not
ready, and the other is shutdown. Neither is terribly interesting.
2. The trace record for the failing case contains nothing but
the status code.
Therefore the trace point call site in the error exit is removed.
Since the trace point is now recording a length instead of a
status, rename the status field and remove the case that records a
zero XID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are three cases where svc_xprt_do_enqueue() returns without
waking an nfsd thread:
1. There is no work to do
2. The transport is already busy
3. There are no available nfsd threads
Only 3. is truly interesting. Move the trace point so it records
that there was work to do and either an nfsd thread was awoken, or
a free one could not found.
As an additional clean up, remove a redundant comment and a couple
of dprintk call sites.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reduce the amount of noise generated by trace_svc_xprt_dequeue by
moving it to the end of svc_get_next_xprt. This generates exactly
one trace event when a ready xprt is found, rather than spurious
events when there is no work to do. The empty events contain no
information that can't be obtained simply by tracing function calls
to svc_xprt_dequeue.
A small additional benefit is simplification of the svc_xprt_event
trace class, which no longer has to handle the case when the @xprt
parameter is NULL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Instead of returning a value that is used to set or clear
a bit, just make ->xpo_secure_port mangle that bit, and return void.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Noticed during code inspection that there is already a
local automatic variable "xprt" so dereferencing rqst->rq_xprt
again is unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations look similar to rpcsec_gss_net_ops,
they just create and destroy another caches. So, they also
can be async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations initialize and destroy sunrpc_net_id
refered per-net items. Only used global list is cache_list,
and accesses already serialized.
sunrpc_destroy_cache_detail() check for list_empty() without
cache_list_lock, but when it's called from unregister_pernet_subsys(),
there can't be callers in parallel, so we won't miss list_empty()
in this case.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prefer the direct use of octal for permissions.
Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.
Miscellanea:
o Whitespace neatening around these conversions.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up: The value of the byte_count parameter is already passed
to rdma_build_arg_xdr as part of the svc_rdma_op_ctxt structure.
Further, without the parameter called "byte_count" there is no need
to have the abbreviated "bc" automatic variable. "bc" can now be
called something more intuitive.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The target needs to return the lesser of the client's Inbound RDMA
Read Queue Depth (IRD), provided in the connection parameters, and
the local device's Outbound RDMA Read Queue Depth (ORD). The latter
limit is max_qp_init_rd_atom, not max_qp_rd_atom.
The svcrdma_ord value caps the ORD value for iWARP transports, which
do not exchange ORD/IRD values at connection time. Since no other
Linux kernel RDMA-enabled storage target sees fit to provide this
cap, I'm removing it here too.
initiator_depth is a u8, so ensure the computed ORD value does not
overflow that field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Other completion handlers use pr_err, not pr_warn.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The interface for flushing the sunrpc auth cache was poorly
designed and has caused problems a number of times.
The design is that you write a timestamp, and all entries
created before that time are discarded.
The most obvious problem is that this is not what people
actually want. They want to just flush the whole cache.
The 1-second granularity can be a problem, as can the use
of wall-clock time.
A current problem is that code will write the current time to
this file - expecting it to clear everything - and if the
seconds number ticks over before this timestamp is checked,
the test "then >= now" fails, and a full flush isn't forced.
So lets just drop the subtleties and always flush the whole
cache. The worst this could do is impose an extra cost
refilling it, but that would require someone to be using
non-standard tools.
We still report an error if the string written is not a number,
but we cause any valid number to flush the whole cache.
Reported-by: "Wang, Alan 1. (NSB - CN/Hangzhou)" <alan.1.wang@nokia-sbell.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix unaligned access in gss_{get,verify}_mic_v2() on sparc64
Signed-off-by: James Ettle <james@ettle.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Changes since v1:
Added changes in these files:
drivers/infiniband/hw/usnic/usnic_transport.c
drivers/staging/lustre/lnet/lnet/lib-socket.c
drivers/target/iscsi/iscsi_target_login.c
drivers/vhost/net.c
fs/dlm/lowcomms.c
fs/ocfs2/cluster/tcp.c
security/tomoyo/network.c
Before:
All these functions either return a negative error indicator,
or store length of sockaddr into "int *socklen" parameter
and return zero on success.
"int *socklen" parameter is awkward. For example, if caller does not
care, it still needs to provide on-stack storage for the value
it does not need.
None of the many FOO_getname() functions of various protocols
ever used old value of *socklen. They always just overwrite it.
This change drops this parameter, and makes all these functions, on success,
return length of sockaddr. It's always >= 0 and can be differentiated
from an error.
Tests in callers are changed from "if (err)" to "if (err < 0)", where needed.
rpc_sockname() lost "int buflen" parameter, since its only use was
to be passed to kernel_getsockname() as &buflen and subsequently
not used in any way.
Userspace API is not changed.
text data bss dec hex filename
30108430 2633624 873672 33615726 200ef6e vmlinux.before.o
30108109 2633612 873672 33615393 200ee21 vmlinux.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: David S. Miller <davem@davemloft.net>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-decnet-user@lists.sourceforge.net
CC: linux-wireless@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: linux-sctp@vger.kernel.org
CC: linux-nfs@vger.kernel.org
CC: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hightlights include:
Stable fixes:
- Fix an incorrect calculation of the RDMA send scatter gather element limit
- Fix an Oops when attempting to free resources after RDMA device removal
Bugfixes:
- SUNRPC: Ensure we always release the TCP socket in a timely fashion when
the connection is shut down.
- SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
Latency/Performance:
- SUNRPC: Queue latency sensitive socket tasks to the less contended
xprtiod queue
- SUNRPC: Make the xprtiod workqueue unbounded.
- SUNRPC: Make the rpciod workqueue unbounded
-----BEGIN PGP SIGNATURE-----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=KST7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull more NFS client updates from Trond Myklebust:
"A few bugfixes and some small sunrpc latency/performance improvements
before the merge window closes:
Stable fixes:
- fix an incorrect calculation of the RDMA send scatter gather
element limit
- fix an Oops when attempting to free resources after RDMA device
removal
Bugfixes:
- SUNRPC: Ensure we always release the TCP socket in a timely fashion
when the connection is shut down.
- SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
Latency/Performance:
- SUNRPC: Queue latency sensitive socket tasks to the less contended
xprtiod queue
- SUNRPC: Make the xprtiod workqueue unbounded.
- SUNRPC: Make the rpciod workqueue unbounded"
* tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
fix parallelism for rpc tasks
Make the xprtiod workqueue unbounded.
SUNRPC: Queue latency-sensitive socket tasks to xprtiod
SUNRPC: Ensure we always close the socket after a connection shuts down
xprtrdma: Fix BUG after a device removal
xprtrdma: Fix calculation of ri_max_send_sges
Calling __UDPX_INC_STATS() from a preemptible context leads to a
warning of the form:
BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u5:0/31
caller is xs_udp_data_receive_workfn+0x194/0x270
CPU: 1 PID: 31 Comm: kworker/u5:0 Not tainted 4.15.0-rc8-00076-g90ea9f1 #2
Workqueue: xprtiod xs_udp_data_receive_workfn
Call Trace:
dump_stack+0x85/0xc1
check_preemption_disabled+0xce/0xe0
xs_udp_data_receive_workfn+0x194/0x270
process_one_work+0x318/0x620
worker_thread+0x20a/0x390
? process_one_work+0x620/0x620
kthread+0x120/0x130
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x24/0x30
Since we're taking a spinlock in those functions anyway, let's fix the
issue by moving the call so that it occurs under the spinlock.
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
But it's also a fairly small update this time around. Some cleanup,
RDMA fixes, overlayfs fixes, and a fix for an NFSv4 state bug.
The bigger deal for nfsd this time around is Jeff Layton's
already-merged i_version patches. This series has a minor conflict with
that one, and the resolution should be obvious. (Stephen Rothwell has
been carrying it in linux-next for what it's worth.)
-----BEGIN PGP SIGNATURE-----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=icEX
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd update from Bruce Fields:
"A fairly small update this time around. Some cleanup, RDMA fixes,
overlayfs fixes, and a fix for an NFSv4 state bug.
The bigger deal for nfsd this time around was Jeff Layton's
already-merged i_version patches"
* tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux:
svcrdma: Fix Read chunk round-up
NFSD: hide unused svcxdr_dupstr()
nfsd: store stat times in fill_pre_wcc() instead of inode times
nfsd: encode stat->mtime for getattr instead of inode->i_mtime
nfsd: return RESOURCE not GARBAGE_ARGS on too many ops
nfsd4: don't set lock stateid's sc_type to CLOSED
nfsd: Detect unhashed stids in nfsd4_verify_open_stid()
sunrpc: remove dead code in svc_sock_setbufsize
svcrdma: Post Receives in the Receive completion handler
nfsd4: permit layoutget of executable-only files
lockd: convert nlm_rqst.a_count from atomic_t to refcount_t
lockd: convert nlm_lockowner.count from atomic_t to refcount_t
lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
Hi folks,
On a multi-core machine, is it expected that we can have parallel RPCs
handled by each of the per-core workqueue?
In testing a read workload, observing via "top" command that a single
"kworker" thread is running servicing the requests (no parallelism).
It's more prominent while doing these operations over krb5p mount.
What has been suggested by Bruce is to try this and in my testing I
see then the read workload spread among all the kworker threads.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A single NFSv4 WRITE compound can often have three operations:
PUTFH, WRITE, then GETATTR.
When the WRITE payload is sent in a Read chunk, the client places
the GETATTR in the inline part of the RPC/RDMA message, just after
the WRITE operation (sans payload). The position value in the Read
chunk enables the receiver to insert the Read chunk at the correct
place in the received XDR stream; that is between the WRITE and
GETATTR.
According to RFC 8166, an NFS/RDMA client does not have to add XDR
round-up to the Read chunk that carries the WRITE payload. The
receiver adds XDR round-up padding if it is absent and the
receiver's XDR decoder requires it to be present.
Commit 193bcb7b37 ("svcrdma: Populate tail iovec when receiving")
attempted to add support for receiving such a compound so that just
the WRITE payload appears in rq_arg's page list, and the trailing
GETATTR is placed in rq_arg's tail iovec. (TCP just strings the
whole compound into the head iovec and page list, without regard
to the alignment of the WRITE payload).
The server transport logic also had to accommodate the optional XDR
round-up of the Read chunk, which it did simply by lengthening the
tail iovec when round-up was needed. This approach is adequate for
the NFSv2 and NFSv3 WRITE decoders.
Unfortunately it is not sufficient for nfsd4_decode_write. When the
Read chunk length is a couple of bytes less than PAGE_SIZE, the
computation at the end of nfsd4_decode_write allows argp->pagelen to
go negative, which breaks the logic in read_buf that looks for the
tail iovec.
The result is that a WRITE operation whose payload length is just
less than a multiple of a page succeeds, but the subsequent GETATTR
in the same compound fails with NFS4ERR_OP_ILLEGAL because the XDR
decoder can't find it. Clients ignore the error, but they must
update their attribute cache via a separate round trip.
As nfsd4_decode_write appears to expect the payload itself to always
have appropriate XDR round-up, have svc_rdma_build_normal_read_chunk
add the Read chunk XDR round-up to the page_len rather than
lengthening the tail iovec.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 193bcb7b37 ("svcrdma: Populate tail iovec when receiving")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The response to a write_space notification is very latency sensitive,
so we should queue it to the lower latency xprtiod_workqueue. This
is something we already do for the other cases where an rpc task
holds the transport XPRT_LOCKED bitlock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Stable fixes:
- Fix calculating ri_max_send_sges, which can oops if max_sge is too small
- Fix a BUG after device removal if freed resources haven't been allocated yet
-----BEGIN PGP SIGNATURE-----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=eXee
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.16-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client fixes for Linux 4.16 #2
Stable fixes:
- Fix calculating ri_max_send_sges, which can oops if max_sge is too small
- Fix a BUG after device removal if freed resources haven't been allocated yet
Ensure that we release the TCP socket once it is in the TCP_CLOSE or
TCP_TIME_WAIT state (and only then) so that we don't confuse rkhunter
and its ilk.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Setting values in struct sock directly is the usual method. Remove
the long dead code using set_fs() and the related comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Michal Kalderon reports a BUG that occurs just after device removal:
[ 169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049
[ 169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma]
The RPC/RDMA client transport attempts to allocate some resources
on demand. Registered buffers are one such resource. These are
allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call
and Reply messages. A hardware resource is associated with each of
these buffers, as they can be used for a Send or Receive Work
Request.
If a device is removed from under an NFS/RDMA mount, the transport
layer is responsible for releasing all hardware resources before
the device can be finally unplugged. A BUG results when the NFS
mount hasn't yet seen much activity: the transport tries to release
resources that haven't yet been allocated.
rpcrdma_free_regbuf() already checks for this case, so just move
that check to cover the DEVICE_REMOVAL case as well.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866 ("xprtrdma: Support unplugging an HCA ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 16f906d66c ("xprtrdma: Reduce required number of send
SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes
a problem where xprtrdma would not work if the device's max_sge
capability was small (low single digits).
At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of
each RPC. ri_max_send_sges is set to this value:
ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;
Then when marshaling each RPC, rpcrdma_args_inline uses that value
to determine whether the device has enough Send SGEs to convey an
NFS WRITE payload inline, or whether instead a Read chunk is
required.
More recently, commit ae72950abf ("xprtrdma: Add data structure to
manage RDMA Send arguments") used the ri_max_send_sges value to
calculate the size of an array, but that commit erroneously assumed
ri_max_send_sges contains a value similar to the device's max_sge,
and not one that was reduced by the minimum SGE count.
This assumption results in the calculated size of the sendctx's
Send SGE array to be too small. When the array is used to marshal
an RPC, the code can write Send SGEs into the following sendctx
element in that array, corrupting it. When the device's max_sge is
large, this issue is entirely harmless; but it results in an oops
in the provider's post_send method, if dev.attrs.max_sge is small.
So let's straighten this out: ri_max_send_sges will now contain a
value with the same meaning as dev.attrs.max_sge, which makes
the code easier to understand, and enables rpcrdma_sendctx_create
to calculate the size of the SGE array correctly.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: 16f906d66c ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the NFSv4
LOOKUPP operation.
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall() due to
nfs_idmap_legacy_upcall() being called without an 'aux' parameter.
- Fix a refcount leak in the standard O_DIRECT error path.
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path.
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type.
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations when
the user is requesting only attributes that are already up to date in
the inode cache, or is specifying the AT_STATX_DONT_SYNC flag.
- Add a module alias for the SCSI pNFS layout type.
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the RDMA
transport protocol settings.
- Various other RDMA bugfixes from Chuck.
- pNFS block layout fixes.
- Always set NFS_LOCK_LOST when a lock is lost.
-----BEGIN PGP SIGNATURE-----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=5Vv2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the
NFSv4 LOOKUPP operation
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall()
due to nfs_idmap_legacy_upcall() being called without an 'aux'
parameter
- Fix a refcount leak in the standard O_DIRECT error path
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations
when the user is requesting only attributes that are already up to
date in the inode cache, or is specifying the AT_STATX_DONT_SYNC
flag
- Add a module alias for the SCSI pNFS layout type
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the
RDMA transport protocol settings
- Various other RDMA bugfixes from Chuck
- pNFS block layout fixes
- Always set NFS_LOCK_LOST when a lock is lost"
* tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Fix a race between mmap() and O_DIRECT
NFS: Remove a redundant call to unmap_mapping_range()
pnfs/blocklayout: Ensure disk address in block device map
pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors
lockd: Fix server refcounting
SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint
SUNRPC: Micro-optimize __rpc_execute
SUNRPC: task_run_action should display tk_callback
sunrpc: Format RPC events consistently for display
SUNRPC: Trace xprt_timer events
xprtrdma: Correct some documenting comments
xprtrdma: Fix "bytes registered" accounting
xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects
xprtrdma: Add trace points to instrument QP and CQ access upcalls
xprtrdma: Add trace points in the client-side backchannel code paths
xprtrdma: Add trace points for connect events
xprtrdma: Add trace points to instrument MR allocation and recovery
xprtrdma: Add trace points to instrument memory invalidation
xprtrdma: Add trace points in reply decoder path
xprtrdma: Add trace points to instrument memory registration
..
Pull kern_recvmsg reduction from Al Viro:
"kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In
all but one case that is not needed - use of ITER_KVEC for ->msg_iter
takes care of the data and does not care about set_fs(). The only
exception is svc_udp_recvfrom() where we want cmsg to be store into
kernel object; everything else can just use sock_recvmsg() and be done
with that.
A followup converting svc_udp_recvfrom() away from set_fs() (and
killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what
netdev folks think of the approach proposed in that followup)"
* 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tipc: switch to sock_recvmsg()
smc: switch to sock_recvmsg()
ipvs: switch to sock_recvmsg()
mISDN: switch to sock_recvmsg()
drbd: switch to sock_recvmsg()
lustre lnet_sock_read(): switch to sock_recvmsg()
cfs2: switch to sock_recvmsg()
ncpfs: switch to sock_recvmsg()
dlm: switch to sock_recvmsg()
svc_recvfrom(): switch to sock_recvmsg()
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
-----BEGIN PGP SIGNATURE-----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=67UR
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client updates for Linux 4.16
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
The common case: There are 13 to 14 actions per RPC, and tk_callback
is non-NULL in only one of them. There's no need to store a NULL in
the tk_callback field during each FSM step.
This slightly improves throughput results in dbench and other multi-
threaded benchmarks on my two-socket client on 56Gb InfiniBand, but
will probably be inconsequential on slower systems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This shows up in every RPC:
kworker/4:1-19772 [004] 3467.373443: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status
kworker/4:1-19772 [004] 3467.373444: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status
What's actually going on is that the first iteration of the RPC
scheduler is invoking the function in tk_callback (in this case,
xprt_timer), then invoking call_status on the next iteration.
Feeding do_action, rather than tk_action, to the "task_run_action"
trace point will now always display the correct FSM step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix kernel-doc warnings in net/sunrpc/xprtrdma/ .
net/sunrpc/xprtrdma/verbs.c:1575: warning: No description found for parameter 'count'
net/sunrpc/xprtrdma/verbs.c:1575: warning: Excess function parameter 'min_reqs' description in 'rpcrdma_ep_post_extra_recv'
net/sunrpc/xprtrdma/backchannel.c:288: warning: No description found for parameter 'r_xprt'
net/sunrpc/xprtrdma/backchannel.c:288: warning: Excess function parameter 'xprt' description in 'rpcrdma_bc_receive_call'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The contents of seg->mr_len changed when ->ro_map stopped returning
the full chunk length in the first segment. Count the full length of
each Write chunk, not the length of the first segment (which now can
only be as large as a page).
Fixes: 9d6b040978 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This change improves Receive efficiency by posting Receives only
on the same CPU that handles Receive completion. Improved latency
and throughput has been noted with this change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Code review suggested that a common bit of code can be
placed into a helper function, and this gives us fewer places to
stick an "I DMA unmapped something" trace point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: struct rpcrdma_mw was named after Memory Windows, but
xprtrdma no longer supports a Memory Window registration mode.
Rename rpcrdma_mw and its fields to reduce confusion and make
the code more sensible to read.
Renaming "mw" was suggested by Tom Talpey, the author of the
original xprtrdma implementation. It's a good idea, but I haven't
done this until now because it's a huge diffstat for no benefit
other than code readability.
However, I'm about to introduce static trace points that expose
a few of xprtrdma's internal data structures. They should make sense
in the trace report, and it's reasonable to treat trace points as a
kernel API contract which might be difficult to change later.
While I'm churning things up, two additional changes:
- rename variables unhelpfully called "r" to "mr", to improve code
clarity, and
- rename the MR-related helper functions using the form
"rpcrdma_mr_<verb>", to be consistent with other areas of the
code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Over time, the industry has adopted the term "frwr"
instead of "frmr". The term "frwr" is now more widely recognized.
For the past couple of years I've attempted to add new code using
"frwr" , but there still remains plenty of older code that still
uses "frmr". Replace all usage of "frmr" to avoid confusion.
While we're churning code, rename variables unhelpfully called "f"
to "frwr", to improve code clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need for the overhead of atomically setting and clearing this bit
flag for every use of a pre-allocated backchannel rpc_rqst. These
are a distinct pool of rpc_rqsts that are used only for callback
operations, so it is safe to simply leave the bit set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. @rqst is set up differently for backchannel Replies. For
example, rqst->rq_task and task->tk_client are both NULL. So it is
easier to understand and maintain this code path if it is separated.
Also, we can get rid of the confusing rl_connect_cookie hack in
rpcrdma_bc_receive_call.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 5a6d1db455 ("SUNRPC: Add a transport-specific private
field in rpc_rqst"), the rpc_rqst's for RPC-over-RDMA backchannel
operations leave rq_buffer set to NULL.
xprt_release does not invoke ->op->buf_free when rq_buffer is NULL.
The RPCRDMA_REQ_F_BACKCHANNEL check in xprt_rdma_free is therefore
redundant because xprt_rdma_free is not invoked for backchannel
requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. This logic is related to marshaling the request, and I'd
like to keep everything that touches req->rl_registered close
together, for CPU cache efficiency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up a harmless oversight. xprtrdma's ->set_port method has
never properly supported IPv6.
This issue has never been a problem because NFS/RDMA mounts have
always required "port=20049", thus so far, rpcbind is not invoked
for these mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Save more space in struct rpcrdma_xprt by removing the redundant
"addr" field from struct rpcrdma_create_data_internal. Wherever
we have rpcrdma_xprt, we also have the rpc_xprt, which has a
sockaddr_storage field with the same content.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This makes the address strings available for debugging messages in
earlier stages of transport set up.
The first benefit is to get rid of the single-use rep_remote_addr
field, saving 128+ bytes in struct rpcrdma_ep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. Remove fields that should have been removed by
commit b3221d6a53 ("xprtrdma: Remove logic that constructs
RDMA_MSGP type calls").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit b5f0afbea4 ("xprtrdma: Per-connection pad optimization")
should have removed this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactoring change: Remote Invalidation is particular to the memory
registration mode that is use. Use a callout instead of a generic
function to handle Remote Invalidation.
This gets rid of the 8-byte flags field in struct rpcrdma_mw, of
which only a single bit flag has been allocated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The rpcrdma_req is not shared yet, and its associated Send hasn't
been posted, thus RMW should be safe. There's no need for the
expense of a lock cycle here.
Fixes: 0ba6f37012 ("xprtrdma: Refactor rpcrdma_deferred_completion")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The backchannel code uses rpcrdma_recv_buffer_put to add new reps
to the free rep list. This also decrements rb_recv_count, which
spoofs the receive overrun logic in rpcrdma_buffer_get_rep.
Commit 9b06688bc3 ("xprtrdma: Fix additional uses of
spin_lock_irqsave(rb_lock)") replaced the original open-coded
list_add with a call to rpcrdma_recv_buffer_put(), but then a year
later, commit 05c974669e ("xprtrdma: Fix receive buffer
accounting") added rep accounting to rpcrdma_recv_buffer_put.
It was an oversight to let the backchannel continue to use this
function.
The fix this, let's combine the "add to free list" logic with
rpcrdma_create_rep.
Also, do not allocate RPCRDMA_MAX_BC_REQUESTS rpcrdma_reps in
rpcrdma_buffer_create and then allocate additional rpcrdma_reps in
rpcrdma_bc_setup_reps. Allocating the extra reps during backchannel
set-up is sufficient.
Fixes: 05c974669e ("xprtrdma: Fix receive buffer accounting")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This leak has been around forever, and is exceptionally rare.
EINVAL causes mount to fail with "an incorrect mount option was
specified" although it's not likely that one of the mount
options is incorrect. Instead, return ENODEV in this case, as this
appears to be an issue with system or device configuration rather
than a specific mount option.
Some obsolete comments are also removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When reading the reply from the server, insert an explicit
cond_resched() to avoid starving higher priority tasks.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Since nfs4_create_referral_server was the only call site of
rpc_protocol, rpc_protocol can now be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Stable bugfixes:
- NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
commit in the case that there were no commit requests.
- SUNRPC: Fix a race in the receive code path
Other fixes:
- NFS: Fix a deadlock in nfs client initialization
- xprtrdma: Fix a performance regression for small IOs
-----BEGIN PGP SIGNATURE-----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=XhEC
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"This has two stable bugfixes, one to fix a BUG_ON() when
nfs_commit_inode() is called with no outstanding commit requests and
another to fix a race in the SUNRPC receive codepath.
Additionally, there are also fixes for an NFS client deadlock and an
xprtrdma performance regression.
Summary:
Stable bugfixes:
- NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
commit in the case that there were no commit requests.
- SUNRPC: Fix a race in the receive code path
Other fixes:
- NFS: Fix a deadlock in nfs client initialization
- xprtrdma: Fix a performance regression for small IOs"
* tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a race in the receive code path
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
xprtrdma: Spread reply processing over more CPUs
nfs: fix a deadlock in nfs client initialization
We must ensure that the call to rpc_sleep_on() in xprt_transmit() cannot
race with the call to xprt_complete_rqst().
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=317
Fixes: ce7c252a8c ("SUNRPC: Add a separate spinlock to protect..")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit d8f532d20e ("xprtrdma: Invoke rpcrdma_reply_handler
directly from RECV completion") introduced a performance regression
for NFS I/O small enough to not need memory registration. In multi-
threaded benchmarks that generate primarily small I/O requests,
IOPS throughput is reduced by nearly a third. This patch restores
the previous level of throughput.
Because workqueues are typically BOUND (in particular ib_comp_wq,
nfsiod_workqueue, and rpciod_workqueue), NFS/RDMA workloads tend
to aggregate on the CPU that is handling Receive completions.
The usual approach to addressing this problem is to create a QP
and CQ for each CPU, and then schedule transactions on the QP
for the CPU where you want the transaction to complete. The
transaction then does not require an extra context switch during
completion to end up on the same CPU where the transaction was
started.
This approach doesn't work for the Linux NFS/RDMA client because
currently the Linux NFS client does not support multiple connections
per client-server pair, and the RDMA core API does not make it
straightforward for ULPs to determine which CPU is responsible for
handling Receive completions for a CQ.
So for the moment, record the CPU number in the rpcrdma_req before
the transport sends each RPC Call. Then during Receive completion,
queue the RPC completion on that same CPU.
Additionally, move all RPC completion processing to the deferred
handler so that even RPCs with simple small replies complete on
the CPU that sent the corresponding RPC Call.
Fixes: d8f532d20e ("xprtrdma: Invoke rpcrdma_reply_handler ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.
This patch:
- Make groups_sort globally visible.
- Move the call to groups_sort to the modifiers of group_info
- Remove the call to groups_sort from set_groups
Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker <thiago.becker@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bugfixes:
- NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"
- SUNRPC: Allow connect to return EHOSTUNREACH
- SUNRPC: Handle ENETDOWN errors
-----BEGIN PGP SIGNATURE-----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=eQyi
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These patches fix a problem with compiling using an old version of
gcc, and also fix up error handling in the SUNRPC layer.
- NFSv4: Ensure gcc 4.4.4 can compile initialiser for
"invalid_stateid"
- SUNRPC: Allow connect to return EHOSTUNREACH
- SUNRPC: Handle ENETDOWN errors"
* tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Handle ENETDOWN errors
SUNRPC: Allow connect to return EHOSTUNREACH
NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"
Make these const as they are only getting passed to the function
cache_create_net having the argument as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Make the struct cache_detail *tmpl argument of the function
cache_create_net as const as it is only getting passed to kmemup having
the argument as const void *.
Add const to the prototype too.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
- fix a number of races in the NFSv4+ state code.
- fix some shutdown crashes in multiple-network-namespace cases.
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading.
-----BEGIN PGP SIGNATURE-----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=PBs+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Lots of good bugfixes, including:
- fix a number of races in the NFSv4+ state code
- fix some shutdown crashes in multiple-network-namespace cases
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading"
* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
SUNRPC: Improve ordering of transport processing
nfsd: deal with revoked delegations appropriately
svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
nfsd: use nfs->ns.inum as net ID
rpc: remove some BUG()s
svcrdma: Preserve CB send buffer across retransmits
nfds: avoid gettimeofday for nfssvc_boot time
fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
lockd: double unregister of inetaddr notifiers
nfsd4: catch some false session retries
nfsd4: fix cached replies to solo SEQUENCE compounds
sunrcp: make function _svc_create_xprt static
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
nfsd: use ARRAY_SIZE
nfsd: give out fewer session slots as limit approaches
nfsd: increase DRC cache limit
nfsd: remove unnecessary nofilehandle checks
nfs_common: convert int to bool
...
Stable bugfixes:
- Revalidate "." and ".." correctly on open
- Avoid RCU usage in tracepoints
- Fix ugly referral attributes
- Fix a typo in nomigration mount option
- Revert "NFS: Move the flock open mode check into nfs_flock()"
Features:
- Implement a stronger send queue accounting system for NFS over RDMA
- Switch some atomics to the new refcount_t type
Other bugfixes and cleanups:
- Clean up access mode bits
- Remove special-case revalidations in nfs_opendir()
- Improve invalidating NFS over RDMA memory for async operations that time out
- Handle NFS over RDMA replies with a worqueue
- Handle NFS over RDMA sends with a workqueue
- Fix up replaying interrupted requests
- Remove dead NFS over RDMA definitions
- Update NFS over RDMA copyright information
- Be more consistent with bool initialization and comparisons
- Mark expected switch fall throughs
- Various sunrpc tracepoint cleanups
- Fix various OPEN races
- Fix a typo in nfs_rename()
- Use common error handling code in nfs_lock_and_join_request()
- Check that some structures are properly cleaned up during net_exit()
- Remove net pointer from dprintk()s
-----BEGIN PGP SIGNATURE-----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=2Zc1
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Revalidate "." and ".." correctly on open
- Avoid RCU usage in tracepoints
- Fix ugly referral attributes
- Fix a typo in nomigration mount option
- Revert "NFS: Move the flock open mode check into nfs_flock()"
Features:
- Implement a stronger send queue accounting system for NFS over RDMA
- Switch some atomics to the new refcount_t type
Other bugfixes and cleanups:
- Clean up access mode bits
- Remove special-case revalidations in nfs_opendir()
- Improve invalidating NFS over RDMA memory for async operations that
time out
- Handle NFS over RDMA replies with a worqueue
- Handle NFS over RDMA sends with a workqueue
- Fix up replaying interrupted requests
- Remove dead NFS over RDMA definitions
- Update NFS over RDMA copyright information
- Be more consistent with bool initialization and comparisons
- Mark expected switch fall throughs
- Various sunrpc tracepoint cleanups
- Fix various OPEN races
- Fix a typo in nfs_rename()
- Use common error handling code in nfs_lock_and_join_request()
- Check that some structures are properly cleaned up during
net_exit()
- Remove net pointer from dprintk()s"
* tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits)
NFS: Revert "NFS: Move the flock open mode check into nfs_flock()"
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
NFS: super: mark expected switch fall-throughs
sunrpc: remove net pointer from messages
nfs: remove net pointer from messages
sunrpc: exit_net cleanup check added
nfs client: exit_net cleanup check added
nfs/write: Use common error handling code in nfs_lock_and_join_requests()
NFSv4: Replace closed stateids with the "invalid special stateid"
NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state
NFSv4: Check the open stateid when searching for expired state
NFSv4: Clean up nfs4_delegreturn_done
NFSv4: cleanup nfs4_close_done
NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn
pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close
NFSv4: Don't try to CLOSE if the stateid 'other' field has changed
NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.
NFS: Fix a typo in nfs_rename()
NFSv4: Fix open create exclusive when the server reboots
...
Publishing of net pointer is not safe, use net->ns.inum as net ID
[ 171.391947] RPC: created new rpcb local clients
(rpcb_local_clnt: ..., rpcb_local_clnt4: ...) for net f00001e7
[ 171.767188] NFSD: starting 90-second grace period (net f00001e7)
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Be sure that all_clients list initialized in net_init hook was return
to initial state.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Display information about the RPC procedure being requested in the
trace log. This sometimes critical information cannot always be
derived from other RPC trace entries.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The rpc_task_begin trace point always display a task ID of zero.
Move the trace point call site so that it picks up the new task ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Credit work contributed by Oracle engineers since 2014.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. This include should have been removed by
commit 23826c7aea ("xprtrdma: Serialize credit accounting again").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: C-structure style XDR encoding and decoding logic has
been replaced over the past several merge windows on both the
client and server. These data structures are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Lift the Send and LocalInv completion handlers out of soft IRQ mode
to make room for other work. Also, move the Send CQ to a different
CPU than the CPU where the Receive CQ is running, for improved
scalability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The sendctx circular queue now guarantees that xprtrdma cannot
overflow the Send Queue, so remove the remaining bits of the
original Send WQE counting mechanism.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When an RPC Call includes a file data payload, that payload can come
from pages in the page cache, or a user buffer (for direct I/O).
If the payload can fit inline, xprtrdma includes it in the Send
using a scatter-gather technique. xprtrdma mustn't allow the RPC
consumer to re-use the memory where that payload resides before the
Send completes. Otherwise, the new contents of that memory would be
exposed by an HCA retransmit of the Send operation.
So, block RPC completion on Send completion, but only in the case
where a separate file data payload is part of the Send. This
prevents the reuse of that memory while it is still part of a Send
operation without an undue cost to other cases.
Waiting is avoided in the common case because typically the Send
will have completed long before the RPC Reply arrives.
These days, an RPC timeout will trigger a disconnect, which tears
down the QP. The disconnect flushes all waiting Sends. This bounds
the amount of time the reply handler has to wait for a Send
completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Invoke a common routine for releasing hardware resources (for
example, invalidating MRs). This needs to be done whether an
RPC Reply has arrived or the RPC was terminated early.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We have one boolean flag in rpcrdma_req today. I'd like to add more
flags, so convert that boolean to a bit flag.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Problem statement:
Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA-
enabled storage initiators don't handle delayed Send completion
correctly. If Send completion is delayed beyond the end of a ULP
transaction, the ULP may release resources that are still being used
by the HCA to complete a long-running Send operation.
This is a common design trait amongst our initiators. Most Send
operations are faster than the ULP transaction they are part of.
Waiting for a completion for these is typically unnecessary.
Infrequently, a network partition or some other problem crops up
where an ordering problem can occur. In NFS parlance, the RPC Reply
arrives and completes the RPC, but the HCA is still retrying the
Send WR that conveyed the RPC Call. In this case, the HCA can try
to use memory that has been invalidated or DMA unmapped, and the
connection is lost. If that memory has been re-used for something
else (possibly not related to NFS), and the Send retransmission
exposes that data on the wire.
Thus we cannot assume that it is safe to release Send-related
resources just because a ULP reply has arrived.
After some analysis, we have determined that the completion
housekeeping will not be difficult for xprtrdma:
- Inline Send buffers are registered via the local DMA key, and
are already left DMA mapped for the lifetime of a transport
connection, thus no additional handling is necessary for those
- Gathered Sends involving page cache pages _will_ need to
DMA unmap those pages after the Send completes. But like
inline send buffers, they are registered via the local DMA key,
and thus will not need to be invalidated
In addition, RPC completion will need to wait for Send completion
in the latter case. However, nearly always, the Send that conveys
the RPC Call will have completed long before the RPC Reply
arrives, and thus no additional latency will be accrued.
Design notes:
In this patch, the rpcrdma_sendctx object is introduced, and a
lock-free circular queue is added to manage a set of them per
transport.
The RPC client's send path already prevents sending more than one
RPC Call at the same time. This allows us to treat the consumer
side of the queue (rpcrdma_sendctx_get_locked) as if there is a
single consumer thread.
The producer side of the queue (rpcrdma_sendctx_put_locked) is
invoked only from the Send completion handler, which is a single
thread of execution (soft IRQ).
The only care that needs to be taken is with the tail index, which
is shared between the producer and consumer. Only the producer
updates the tail index. The consumer compares the head with the
tail to ensure that the a sendctx that is in use is never handed
out again (or, expressed more conventionally, the queue is empty).
When the sendctx queue empties completely, there are enough Sends
outstanding that posting more Send operations can result in a Send
Queue overflow. In this case, the ULP is told to wait and try again.
This introduces strong Send Queue accounting to xprtrdma.
As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
suggested a mechanism that does not require signaling every Send.
We signal once every N Sends, and perform SGE unmapping of N Send
operations during that one completion.
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 655fec6987 ("xprtrdma: Use gathered Send for large inline
messages") assumed that, since the zeroeth element of the Send SGE
array always pointed to req->rl_rdmabuf, it needed to be initialized
just once. This was a valid assumption because the Send SGE array
and rl_rdmabuf both live in the same rpcrdma_req.
In a subsequent patch, the Send SGE array will be separated from the
rpcrdma_req, so the zeroeth element of the SGE array needs to be
initialized every time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Make rpcrdma_prepare_send_sges() return a negative errno
instead of a bool. Soon callers will want distinct treatments of
different types of failures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When this function fails, it needs to undo the DMA mappings it's
done so far. Otherwise these are leaked.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. rpcrdma_prepare_hdr_sge() sets num_sge to one, then
rpcrdma_prepare_msg_sges() sets num_sge again to the count of SGEs
it added, plus one for the header SGE just mapped in
rpcrdma_prepare_hdr_sge(). This is confusing, and nails in an
assumption about when these functions are called.
Instead, maintain a running count that both functions can update
with just the number of SGEs they have added to the SGE array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to decode and save the incoming rdma_credits field _after_
we know that the direction of the message is "forward direction
Reply". Otherwise, the credits value in reverse direction Calls is
also used to update the forward direction credits.
It is safe to decode the rdma_credits field in rpcrdma_reply_handler
now that rpcrdma_reply_handler is single-threaded. Receives complete
in the same order as they were sent on the NFS server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed that the soft IRQ thread looked pretty busy under heavy
I/O workloads. perf suggested one area that was expensive was the
queue_work() call in rpcrdma_wc_receive. That gave me some ideas.
Instead of scheduling a separate worker to process RPC Replies,
promote the Receive completion handler to IB_POLL_WORKQUEUE, and
invoke rpcrdma_reply_handler directly.
Note that the poll workqueue is single-threaded. In order to keep
memory invalidation from serializing all RPC Replies, handle any
necessary invalidation tasks in a separate multi-threaded workqueue.
This provides a two-tier scheme, similar to OS I/O interrupt
handlers: A fast interrupt handler that schedules the slow handler
and re-enables the interrupt, and a slower handler that is invoked
for any needed heavy lifting.
Benefits include:
- One less context switch for RPCs that don't register memory
- Receive completion handling is moved out of soft IRQ context to
make room for other users of soft IRQ
- The same CPU core now DMA syncs and XDR decodes the Receive buffer
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: I'd like to be able to invoke the tail of
rpcrdma_reply_handler in two different places. Split the tail out
into its own helper function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Make it easier to pass the decoded XID, vers, credits, and
proc fields around by moving these variables into struct rpcrdma_rep.
Note: the credits field will be handled in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A reply with an unrecognized value in the version field means the
transport header is potentially garbled and therefore all the fields
are untrustworthy.
Fixes: 59aa1f9a3c ("xprtrdma: Properly handle RDMA_ERROR ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Since it can take a while before a specific thread gets scheduled, it
is better to just implement a first come first served queue mechanism.
That way, if a thread is already scheduled and is idle, it can pick up
the work to do from the queue.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I noticed the server was sometimes not closing the connection after
a flushed Send. For example, if the client responds with an RNR NAK
to a Reply from the server, that client might be deadlocked, and
thus wouldn't send any more traffic. Thus the server wouldn't have
any opportunity to notice the XPT_CLOSE bit has been set.
Enqueue the transport so that svcxprt notices the bit even if there
is no more transport activity after a flushed completion, QP access
error, or device removal event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It would be kinder to WARN() and recover in several spots here instead
of BUG()ing.
Also, it looks like the read_u32_from_xdr_buf() call could actually
fail, though it might require a broken (or malicious) client, so convert
that to just an error return.
Reported-by: Weston Andros Adamson <dros@monkey.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The function _svc_create_xprt is local to the source and
does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol '_svc_create_xprt' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
The transport may need to flush transport connect and receive tasks
that are running on rpciod. In order to do so safely, we need to
ensure that the caller of cancel_work_sync() etc is not itself
running on rpciod.
Do so by running the destroy task from the system workqueue.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up: There are no remaining callers of this method.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The "safe" version of ro_unmap is used here to avoid waiting
unnecessarily. However:
- It is safe to wait. After all, we have to wait anyway when using
FMR to register memory.
- This case is rare: it occurs only after a reconnect.
By switching this call site to ro_unmap_sync, the final use of
ro_unmap_safe is removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In current kernels, waiting in xprt_release appears to be safe to
do. I had erroneously believed that for ASYNC RPCs, waiting of any
kind in xprt_release->xprt_rdma_free would result in deadlock. I've
done injection testing and consulted with Trond to confirm that
waiting in the RPC release path is safe.
For the very few times where RPC resources haven't yet been released
earlier by the reply handler, it is safe to wait synchronously in
xprt_rdma_free for invalidation rather than defering it to MR
recovery.
Note: When the QP is error state, posting a LocalInvalidate should
flush and mark the MR as bad. There is no way the remote HCA can
access that MR via a QP in error state, so it is effectively already
inaccessible and thus safe for the Upper Layer to access. The next
time the MR is used it should be recognized and cleaned up properly
by frwr_op_map.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We remove the request from the receive list before we call
xprt_wait_on_pinned_rqst(), and so we need to use list_del_init().
Otherwise, we will see list corruption when xprt_complete_rqst()
is called.
Reported-by: Emre Celebi <emre@primarydata.com>
Fixes: ce7c252a8c ("SUNRPC: Add a separate spinlock to protect...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
sock is being initialized and then being almost immediately updated
hence the initialized value is not being used and is redundant. Remove
the initialization. Cleans up clang warning:
warning: Value stored to 'sock' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The ib_mr->length represents the length of the MR in bytes as per
the IBTA spec 1.3 section 11.2.10.3 (REGISTER PHYSICAL MEMORY REGION).
Currently ib_mr->length field is defined as only 32-bits field.
This might result into truncation and failed WRs of consumers who
registers more than 4GB bytes memory regions and whose WRs accessing
such MRs.
This patch makes the length 64-bit to avoid such truncation.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Fixes: 4c67e2bfc8 ("IB/core: Introduce new fast registration API")
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Hightlights include:
Stable bugfixes:
- Fix mirror allocation in the writeback code to avoid a use after free
- Fix the O_DSYNC writes to use the correct byte range
- Fix 2 use after free issues in the I/O code
Features:
- Writeback fixes to split up the inode->i_lock in order to reduce contention
- RPC client receive fixes to reduce the amount of time the
xprt->transport_lock is held when receiving data from a socket into am
XDR buffer.
- Ditto fixes to reduce contention between call side users of the rdma
rb_lock, and its use in rpcrdma_reply_handler.
- Re-arrange rdma stats to reduce false cacheline sharing.
- Various rdma cleanups and optimisations.
- Refactor the NFSv4.1 exchange id code and clean up the code.
- Const-ify all instances of struct rpc_xprt_ops
Bugfixes:
- Fix the NFSv2 'sec=' mount option.
- NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
- Fix the NFSv3 GRANT callback when the port changes on the server.
- Fix livelock issues with COMMIT
- NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when doing
and NFSv4.1 open by filehandle.
-----BEGIN PGP SIGNATURE-----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=1Ssl
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Hightlights include:
Stable bugfixes:
- Fix mirror allocation in the writeback code to avoid a use after
free
- Fix the O_DSYNC writes to use the correct byte range
- Fix 2 use after free issues in the I/O code
Features:
- Writeback fixes to split up the inode->i_lock in order to reduce
contention
- RPC client receive fixes to reduce the amount of time the
xprt->transport_lock is held when receiving data from a socket into
am XDR buffer.
- Ditto fixes to reduce contention between call side users of the
rdma rb_lock, and its use in rpcrdma_reply_handler.
- Re-arrange rdma stats to reduce false cacheline sharing.
- Various rdma cleanups and optimisations.
- Refactor the NFSv4.1 exchange id code and clean up the code.
- Const-ify all instances of struct rpc_xprt_ops
Bugfixes:
- Fix the NFSv2 'sec=' mount option.
- NFSv4.1: don't use machine credentials for CLOSE when using
'sec=sys'
- Fix the NFSv3 GRANT callback when the port changes on the server.
- Fix livelock issues with COMMIT
- NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when
doing and NFSv4.1 open by filehandle"
* tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Count the bytes of skipped subrequests in nfs_lock_and_join_requests()
NFS: Don't hold the group lock when calling nfs_release_request()
NFS: Remove pnfs_generic_transfer_commit_list()
NFS: nfs_lock_and_join_requests and nfs_scan_commit_list can deadlock
NFS: Fix 2 use after free issues in the I/O code
NFS: Sync the correct byte range during synchronous writes
lockd: Delete an error message for a failed memory allocation in reclaimer()
NFS: remove jiffies field from access cache
NFS: flush data when locking a file to ensure cache coherence for mmap.
SUNRPC: remove some dead code.
NFS: don't expect errors from mempool_alloc().
xprtrdma: Use xprt_pin_rqst in rpcrdma_reply_handler
xprtrdma: Re-arrange struct rx_stats
NFS: Fix NFSv2 security settings
NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
SUNRPC: ECONNREFUSED should cause a rebind.
NFS: Remove unused parameter gfp_flags from nfs_pageio_init()
NFSv4: Fix up mirror allocation
SUNRPC: Add a separate spinlock to protect the RPC request receive list
SUNRPC: Cleanup xs_tcp_read_common()
...
RPC_TASK_NO_RETRANS_TIMEOUT is set when cl_noretranstimeo
is set, which happens when RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT is set,
which happens when NFS_CS_NO_RETRANS_TIMEOUT is set.
This flag means "don't resend on a timeout, only resend if the
connection gets broken for some reason".
cl_discrtry is set when RPC_CLNT_CREATE_DISCRTRY is set, which
happens when NFS_CS_DISCRTRY is set.
This flag means "always disconnect before resending".
NFS_CS_NO_RETRANS_TIMEOUT and NFS_CS_DISCRTRY are both only set
in nfs4_init_client(), and it always sets both.
So we will never have a situation where only one of the flags is set.
So this code, which tests if timeout retransmits are allowed, and
disconnection is required, will never run.
So it makes sense to remove this code as it cannot be tested and
could confuse people reading the code (like me).
(alternately we could leave it there with a comment saying
it is never actually used).
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Adopt the use of xprt_pin_rqst to eliminate contention between
Call-side users of rb_lock and the use of rb_lock in
rpcrdma_reply_handler.
This replaces the mechanism introduced in 431af645cf ("xprtrdma:
Fix client lock-up after application signal fires").
Use recv_lock to quickly find the completing rqst, pin it, then
drop the lock. At that point invalidation and pull-up of the Reply
XDR can be done. Both are often expensive operations.
Finally, take recv_lock again to signal completion to the RPC
layer. It also protects adjustment of "cwnd".
This greatly reduces the amount of time a lock is held by the
reply handler. Comparing lock_stat results shows a marked decrease
in contention on rb_lock and recv_lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[trond.myklebust@primarydata.com: Remove call to rpcrdma_buffer_put() from
the "out_norqst:" path in rpcrdma_reply_handler.]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The rdma_rw API adjusts max_send_wr upwards during the
rdma_create_qp() call. If the ULP actually wants to take advantage
of these extra resources, it must increase the size of its send
completion queue (created before rdma_create_qp is called) and
increase its send queue accounting limit.
Use the new rdma_rw_mr_factor API to figure out the correct value
to use for the Send Queue and Send Completion Queue depths.
And, ensure that the chosen Send Queue depth for a newly created
transport does not overrun the QP WR limit of the underlying device.
Lastly, there's no longer a need to carry the Send Queue depth in
struct svcxprt_rdma, since the value is used only in the
svc_rdma_accept() path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the chosen Receive Queue depth for a newly created
transport does not overrun the QP WR limit of the underlying device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
So that NFS WRITE payloads can eventually be placed directly into a
file's page cache, enable the RPC-over-RDMA transport to present
these payloads in the xdr_buf's page list, while placing trailing
content (such as a GETATTR operation) in the xdr_buf's tail.
After this change, the RPC-over-RDMA's "copy tail" hack, added by
commit a97c331f9a ("svcrdma: Handle additional inline content"),
is no longer needed and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Dan Carpenter <dan.carpenter@oracle.com> observed that the while()
loop in svc_rdma_build_read_chunk() does not document the assumption
that the loop interior is always executed at least once.
Defensive: the function now returns -EINVAL if this assumption
fails.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Close an attack vector by moving the arrays of per-server methods to
read-only memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Close an attack vector by moving the arrays of server-side transport
methods to read-only memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To reduce false cacheline sharing, separate counters that are likely
to be accessed in the Call path from those accessed in the Reply
path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If you
- mount and NFSv3 filesystem
- do some file locking which requires the server
to make a GRANT call back
- unmount
- mount again and do the same locking
then the second attempt at locking suffers a 30 second delay.
Unmounting and remounting causes lockd to stop and restart,
which causes it to bind to a new port.
The server still thinks the old port is valid and gets ECONNREFUSED
when trying to contact it.
ECONNREFUSED should be seen as a hard error that is not worth
retrying. Rebinding is the only reasonable response.
This patch forces a rebind if that makes sense.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This further reduces contention with the transport_lock, and allows us
to convert to using a non-bh-safe spinlock, since the list is now never
accessed from a bh context.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The backchannel request has no associated task, so it is going nowhere
until we call xprt_complete_bc_request().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead add a mechanism to ensure that the request doesn't disappear
from underneath us while copying from the socket. We do this by
preventing xprt_release() from freeing the XDR buffers until the
flag RPC_TASK_MSG_RECV has been cleared from the request.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Re-arrange the pointer arithmetic in the chunk list encoders to
eliminate several more integer multiplication instructions during
Transport Header encoding.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Re-arrange the pointer arithmetic in rpcrdma_convert_iovs() to
eliminate several integer multiplication instructions during
Transport Header encoding.
Also, array overflow does not occur outside development
environments, so replace overflow checking with one spot check
at the end. This reduces the number of conditional branches in
the common case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Same changes as in rpcrdma_marshal_req(). This removes
C-structure style encoding from the backchannel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While marshaling chunk lists which are variable-length XDR objects,
check for XDR buffer overflow at every step. Measurements show no
significant changes in CPU utilization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Initialize an xdr_stream at the top of rpcrdma_marshal_req(), and
use it to encode the fixed transport header fields. This xdr_stream
will be used to encode the chunk lists in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Remove a variable whose result is no longer used.
Commit 655fec6987 ("xprtrdma: Use gathered Send for large inline
messages") should have removed it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The caller already has rpcrdma_xprt, so pass that directly
instead. And provide a documenting comment for this critical
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace C-structure based XDR decoding for consistency
with other areas.
struct rpcrdma_rep is rearranged slightly so that the relevant fields
are in cache when the Receive completion handler is invoked.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This field is no longer used outside the Receive completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The opcode check is no longer necessary, because since
commit 2fa8f88d88 ("xprtrdma: Use new CQ API for RPC-over-RDMA
client send CQs"), this completion handler is invoked only for
RECV work requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up chunk list decoding by using the xdr_stream set up in
rpcrdma_reply_handler. This hardens decoding by checking for buffer
overflow at every step while unmarshaling variable-length XDR
objects.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor the reply handler's transport header decoding logic to make
it easier to understand and update.
Convert some of the handler to use xdr_streams, which will enable
stricter validation of input data and enable the eventual addition
of support for new combinations of chunks, such as "Write + Reply"
or "PZRC + normal Read".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Transport header decoding deals with untrusted input data, therefore
decoding this header needs to be hardened.
Adopt the same infrastructure that is used when XDR decoding NFS
replies. This is slightly more CPU-intensive than the replaced code,
but we're not adding new atomics, locking, or context switches. The
cost is manageable.
Start by initializing an xdr_stream in rpcrdma_reply_handler().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After transport instance creation, these function pointers never
change. Mark them as constant to prevent their use as an attack
vector for code injections.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 3d4762639d ("tcp: remove poll() flakes when receiving
RST") in v4.12 changed the order in which ->sk_state_change()
and ->sk_error_report() are called when a socket is shut
down - sk_state_change() is now called first.
This causes xs_tcp_state_change() -> xs_sock_mark_closed() ->
xprt_disconnect_done() to wake all pending tasked with -EAGAIN.
When the ->sk_error_report() callback arrives, it is too late to
pass the error on, and it is lost.
As easy way to demonstrate the problem caused is to try to start
rpc.nfsd while rcpbind isn't running.
nfsd will attempt a tcp connection to rpcbind. A ECONNREFUSED
error is returned, but sunrpc code loses the error and keeps
retrying. If it saw the ECONNREFUSED, it would abort.
To fix this, handle the sk->sk_err in the TCP_CLOSE branch of
xs_tcp_state_change().
Fixes: 3d4762639d ("tcp: remove poll() flakes when receiving RST")
Cc: stable@vger.kernel.org (v4.12)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable bugfixes:
- Fix -EACCESS on commit to DS handling
- Fix initialization of nfs_page_array->npages
- Only invalidate dentries that are actually invalid
Features:
- Enable NFSoRDMA transparent state migration
- Add support for lookup-by-filehandle
- Add support for nfs re-exporting
Other bugfixes and cleanups:
- Christoph cleaned up the way we declare NFS operations
- Clean up various internal structures
- Various cleanups to commits
- Various improvements to error handling
- Set the dt_type of . and .. entries in NFS v4
- Make slot allocation more reliable
- Fix fscache stat printing
- Fix uninitialized variable warnings
- Fix potential list overrun in nfs_atomic_open()
- Fix a race in NFSoRDMA RPC reply handler
- Fix return size for nfs42_proc_copy()
- Fix against MAC forgery timing attacks
-----BEGIN PGP SIGNATURE-----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=OpLj
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.13-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Fix -EACCESS on commit to DS handling
- Fix initialization of nfs_page_array->npages
- Only invalidate dentries that are actually invalid
Features:
- Enable NFSoRDMA transparent state migration
- Add support for lookup-by-filehandle
- Add support for nfs re-exporting
Other bugfixes and cleanups:
- Christoph cleaned up the way we declare NFS operations
- Clean up various internal structures
- Various cleanups to commits
- Various improvements to error handling
- Set the dt_type of . and .. entries in NFS v4
- Make slot allocation more reliable
- Fix fscache stat printing
- Fix uninitialized variable warnings
- Fix potential list overrun in nfs_atomic_open()
- Fix a race in NFSoRDMA RPC reply handler
- Fix return size for nfs42_proc_copy()
- Fix against MAC forgery timing attacks"
* tag 'nfs-for-4.13-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (68 commits)
NFS: Don't run wake_up_bit() when nobody is waiting...
nfs: add export operations
nfs4: add NFSv4 LOOKUPP handlers
nfs: add a nfs_ilookup helper
nfs: replace d_add with d_splice_alias in atomic_open
sunrpc: use constant time memory comparison for mac
NFSv4.2 fix size storage for nfs42_proc_copy
xprtrdma: Fix documenting comments in frwr_ops.c
xprtrdma: Replace PAGE_MASK with offset_in_page()
xprtrdma: FMR does not need list_del_init()
xprtrdma: Demote "connect" log messages
NFSv4.1: Use seqid returned by EXCHANGE_ID after state migration
NFSv4.1: Handle EXCHGID4_FLAG_CONFIRMED_R during NFSv4.1 migration
xprtrdma: Don't defer MR recovery if ro_map fails
xprtrdma: Fix FRWR invalidation error recovery
xprtrdma: Fix client lock-up after application signal fires
xprtrdma: Rename rpcrdma_req::rl_free
xprtrdma: Pass only the list of registered MRs to ro_unmap_sync
xprtrdma: Pre-mark remotely invalidated MRs
xprtrdma: On invalidation failure, remove MWs from rl_registered
...
RPC-over-RDMA transport to use the new rdma_rw API.
Christoph cleaned the way nfs operations are declared, removing a bunch
of function-pointer casts and declaring the operation vectors as const.
Christoph's changes touch both client and server, and both client and
server pulls this time around should be based on the same commits from
Christoph.
(Note: Anna and I initially didn't coordinate this well and we realized
our pull requests were going to leave you with Christoph's 33 patches
duplicated between our two trees. We decided a last-minute rebase was
the lesser of two evils, so her pull request will show that last-minute
rebase. Yell if that was the wrong choice, and we'll know better for
next time....)
-----BEGIN PGP SIGNATURE-----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=mR/a
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.13' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Chuck's RDMA update overhauls the "call receive" side of the
RPC-over-RDMA transport to use the new rdma_rw API.
Christoph cleaned the way nfs operations are declared, removing a
bunch of function-pointer casts and declaring the operation vectors as
const.
Christoph's changes touch both client and server, and both client and
server pulls this time around should be based on the same commits from
Christoph"
* tag 'nfsd-4.13' of git://linux-nfs.org/~bfields/linux: (53 commits)
svcrdma: fix an incorrect check on -E2BIG and -EINVAL
nfsd4: factor ctime into change attribute
svcrdma: Remove svc_rdma_chunk_ctxt::cc_dir field
svcrdma: use offset_in_page() macro
svcrdma: Clean up after converting svc_rdma_recvfrom to rdma_rw API
svcrdma: Clean-up svc_rdma_unmap_dma
svcrdma: Remove frmr cache
svcrdma: Remove unused Read completion handlers
svcrdma: Properly compute .len and .buflen for received RPC Calls
svcrdma: Use generic RDMA R/W API in RPC Call path
svcrdma: Add recvfrom helpers to svc_rdma_rw.c
sunrpc: Allocate up to RPCSVC_MAXPAGES per svc_rqst
svcrdma: Don't account for Receive queue "starvation"
svcrdma: Improve Reply chunk sanity checking
svcrdma: Improve Write chunk sanity checking
svcrdma: Improve Read chunk sanity checking
svcrdma: Remove svc_rdma_marshal.c
svcrdma: Avoid Send Queue overflow
svcrdma: Squelch disconnection messages
sunrpc: Disable splice for krb5i
...
Otherwise, we enable a MAC forgery via timing attack.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
FASTREG and LOCAL_INV WRs are typically not signaled. localinv_wake
is used for the last LOCAL_INV WR in a chain, which is always
signaled. The documenting comments should reflect that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit 38f1932e60 ("xprtrdma: Remove FMRs from the unmap list
after unmapping") utilized list_del_init() to try to prevent some
list corruption. The corruption was actually caused by the reply
handler racing with a signal. Now that MR invalidation is properly
serialized, list_del_init() can safely be replaced.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some have complained about the log messages generated when xprtrdma
opens or closes a connection to a server. When an NFS mount is
mostly idle these can appear every few minutes as the client idles
out the connection and reconnects.
Connection and disconnection is a normal part of operation, and not
exceptional, so change these to dprintk's for now. At some point
all of these will be converted to tracepoints, but that's for
another day.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Deferred MR recovery does a DMA-unmapping of the MW. However, ro_map
invokes rpcrdma_defer_mr_recovery in some error cases where the MW
has not even been DMA-mapped yet.
Avoid a DMA-unmapping error replacing rpcrdma_defer_mr_recovery.
Also note that if ib_dma_map_sg is asked to map 0 nents, it will
return 0. So the extra "if (i == 0)" check is no longer needed.
Fixes: 42fe28f607 ("xprtrdma: Do not leak an MW during a DMA ...")
Fixes: 505bbe64dd ("xprtrdma: Refactor MR recovery work queues")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When ib_post_send() fails, all LOCAL_INV WRs past @bad_wr have to be
examined, and the MRs reset by hand.
I'm not sure how the existing code can work by comparing R_keys.
Restructure the logic so that instead it walks the chain of WRs,
starting from the first bad one.
Make sure to wait for completion if at least one WR was actually
posted. Otherwise, if the ib_post_send fails, we can end up
DMA-unmapping the MR while LOCAL_INV operations are in flight.
Commit 7a89f9c626 ("xprtrdma: Honor ->send_request API contract")
added the rdma_disconnect() call site. The disconnect actually
causes more problems than it solves, and SQ overruns happen only as
a result of software bugs. So remove it.
Fixes: d7a21c1bed ("xprtrdma: Reset MRs in frwr_op_unmap_sync()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After a signal, the RPC client aborts synchronous RPCs running on
behalf of the signaled application.
The server is still executing those RPCs, and will write the results
back into the client's memory when it's done. By the time the server
writes the results, that memory is likely being used for other
purposes. Therefore xprtrdma has to immediately invalidate all
memory regions used by those aborted RPCs to prevent the server's
writes from clobbering that re-used memory.
With FMR memory registration, invalidation takes a relatively long
time. In fact, the invalidation is often still running when the
server tries to write the results into the memory regions that are
being invalidated.
This sets up a race between two processes:
1. After the signal, xprt_rdma_free calls ro_unmap_safe.
2. While ro_unmap_safe is still running, the server replies and
rpcrdma_reply_handler runs, calling ro_unmap_sync.
Both processes invoke ib_unmap_fmr on the same FMR.
The mlx4 driver allows two ib_unmap_fmr calls on the same FMR at
the same time, but HCAs generally don't tolerate this. Sometimes
this can result in a system crash.
If the HCA happens to survive, rpcrdma_reply_handler continues. It
removes the rpc_rqst from rq_list and releases the transport_lock.
This enables xprt_rdma_free to run in another process, and the
rpc_rqst is released while rpcrdma_reply_handler is still waiting
for the ib_unmap_fmr call to finish.
But further down in rpcrdma_reply_handler, the transport_lock is
taken again, and "rqst" is dereferenced. If "rqst" has already been
released, this triggers a general protection fault. Since bottom-
halves are disabled, the system locks up.
Address both issues by reversing the order of the xprt_lookup_rqst
call and the ro_unmap_sync call. Introduce a separate lookup
mechanism for rpcrdma_req's to enable calling ro_unmap_sync before
xprt_lookup_rqst. Now the handler takes the transport_lock once
and holds it for the XID lookup and RPC completion.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: I'm about to use the rl_free field for purposes other than
a free list. So use a more generic name.
This is a refactoring change only.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are rare cases where an rpcrdma_req can be re-used (via
rpcrdma_buffer_put) while the RPC reply handler is still running.
This is due to a signal firing at just the wrong instant.
Since commit 9d6b040978 ("xprtrdma: Place registered MWs on a
per-req list"), rpcrdma_mws are self-contained; ie., they fully
describe an MR and scatterlist, and no part of that information is
stored in struct rpcrdma_req.
As part of closing the above race window, pass only the req's list
of registered MRs to ro_unmap_sync, rather than the rpcrdma_req
itself.
Some extra transport header sanity checking is removed. Since the
client depends on its own recollection of what memory had been
registered, there doesn't seem to be a way to abuse this change.
And, the check was not terribly effective. If the client had sent
Read chunks, the "list_empty" test is negative in both of the
removed cases, which are actually looking for Write or Reply
chunks.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are rare cases where an rpcrdma_req and its matched
rpcrdma_rep can be re-used, via rpcrdma_buffer_put, while the RPC
reply handler is still using that req. This is typically due to a
signal firing at just the wrong instant.
As part of closing this race window, avoid using the wrong
rpcrdma_rep to detect remotely invalidated MRs. Mark MRs as
invalidated while we are sure the rep is still OK to use.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Callers assume the ro_unmap_sync and ro_unmap_safe methods empty
the list of registered MRs. Ensure that all paths through
fmr_op_unmap_sync() remove MWs from that list.
Fixes: 9d6b040978 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In xprt_alloc_slot(), the spin lock is only needed to provide atomicity
between the atomic_add_unless() failure and the call to xprt_add_backlog().
We do not actually need to hold it across the memory allocation itself.
By dropping the lock, we can use a more resilient GFP_NOFS allocation,
just as we now do in the rest of the RPC client code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
pc_count is the only writeable memeber of struct svc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct svc_procinfo, and into a
separate writable array that is pointed to by struct svc_version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the resp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Drop the argp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the p and resp arguments as they are always NULL or can trivially
be derived from the rqstp argument. With that all functions now have the
same prototype, and we can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument. With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
struct rpc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
p_count is the only writeable memeber of struct rpc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct rpc_procinfo, and into a
separate writable array that is pointed to by struct rpc_version and
indexed by p_statidx.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Pass struct rpc_request as the first argument instead of an untyped blob.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pass struct rpc_request as the first argument instead of an untyped blob,
and mark the data object as const.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
The current check will always be true and will always jump to
err1, this looks dubious to me. I believe && should be used
instead of ||.
Detected by CoverityScan, CID#1450120 ("Logically Dead Code")
Fixes: 107c1d0a99 ("svcrdma: Avoid Send Queue overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: No need to save the I/O direction. The functions that
release svc_rdma_chunk_ctxt already know what direction to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Use offset_in_page() macro instead of open-coding.
Reported-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Registration mode details are now handled by the rdma_rw
API, and thus can be removed from svcrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no longer a need to compare each SGE's lkey with the PD's
local_dma_lkey. Now that FRWR is gone, all DMA mappings are for
pages that were registered with this key.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Now that the svc_rdma_recvfrom path uses the rdma_rw API,
the details of Read sink buffer registration are dealt with by the
kernel's RDMA core. This cache is no longer used, and can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up:
The generic RDMA R/W API conversion of svc_rdma_recvfrom replaced
the Register, Read, and Invalidate completion handlers. Remove the
old ones, which are no longer used.
These handlers shared some helper code with svc_rdma_wc_send. Fold
the wc_common helper back into the one remaining completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When an RPC-over-RDMA request is received, the Receive buffer
contains a Transport Header possibly followed by an RPC message.
Even though rq_arg.head[0] (as passed to NFSD) does not contain the
Transport Header header, currently rq_arg.len includes the size of
the Transport Header.
That violates the intent of the xdr_buf API contract. .buflen should
include everything, but .len should be exactly the length of the RPC
message in the buffer.
The rq_arg fields are summed together at the end of
svc_rdma_recvfrom to obtain the correct return value. rq_arg.len
really ought to contain the correct number of bytes already, but it
currently doesn't due to the above misbehavior.
Let's instead ensure that .buflen includes the length of the
transport header, and that .len is always equal to head.iov_len +
.page_len + tail.iov_len .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current svcrdma recvfrom code path has a lot of detail about
registration mode and the type of port (iWARP, IB, etc).
Instead, use the RDMA core's generic R/W API. This shares code with
other RDMA-enabled ULPs that manages the gory details of buffer
registration and the posting of RDMA Read Work Requests.
Since the Read list marshaling code is being replaced, I took the
opportunity to replace C structure-based XDR encoding code with more
portable code that uses pointer arithmetic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_rw.c already contains helpers for the sendto path.
Introduce helpers for the recvfrom path.
The plan is to replace the local NFSD bespoke code that constructs
and posts RDMA Read Work Requests with calls to the rdma_rw API.
This shares code with other RDMA-enabled ULPs that manages the gory
details of buffer registration and posting Work Requests.
This new code also puts all RDMA_NOMSG-specific logic in one place.
Lastly, the use of rqstp->rq_arg.pages is deprecated in favor of
using rqstp->rq_pages directly, for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svcrdma needs 259 pages allocated to receive 1MB NFSv4.0 WRITE requests:
- 1 page for the transport header and head iovec
- 256 pages for the data payload
- 1 page for the trailing GETATTR request (since NFSD XDR decoding
does not look for a tail iovec, the GETATTR is stuck at the end
of the rqstp->rq_arg.pages list)
- 1 page for building the reply xdr_buf
But RPCSVC_MAXPAGES is already 259 (on x86_64). The problem is that
svc_alloc_arg never allocates that many pages. To address this:
1. The final element of rq_pages always points to NULL. To
accommodate up to 259 pages in rq_pages, add an extra element
to rq_pages for the array termination sentinel.
2. Adjust the calculation of "pages" to match how RPCSVC_MAXPAGES
is calculated, so it can go up to 259. Bruce noted that the
calculation assumes sv_max_mesg is a multiple of PAGE_SIZE,
which might not always be true. I didn't change this assumption.
3. Change the loop boundaries to allow 259 pages to be allocated.
Additional clean-up: WARN_ON_ONCE adds an extra conditional branch,
which is basically never taken. And there's no need to dump the
stack here because svc_alloc_arg has only one caller.
Keeping that NULL "array termination sentinel"; there doesn't appear to
be any code that depends on it, only code in nfsd_splice_actor() which
needs the 259th element to be initialized to *something*. So it's
possible we could just keep the array at 259 elements and drop that
final NULL, but we're being conservative for now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
>From what I can tell, calling ->recvfrom when there is no work to do
is a normal part of operation. This is the only way svc_recv can
tell when there is no more data ready to receive on the transport.
Neither the TCP nor the UDP transport implementations have a
"starve" metric.
The cost of receive starvation accounting is bumping an atomic, which
results in extra (IMO unnecessary) bus traffic between CPU sockets,
while holding a spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Ensure that segment lengths are not crazy.
- Ensure that the Reply chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Write
chunk, since this implementation does not support more than one per
message.
- Ensure that segment lengths are not crazy.
- Ensure that the chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Read chunk,
since this implementation currently does not support more than one
per RPC transaction.
- Ensure that segment lengths are not crazy.
- Remove the segment count check. With a 1KB inline threshold, the
largest number of Read segments that can be conveyed is about 40
(for a RDMA_NOMSG Call message). This is nowhere near
RPCSVC_MAXPAGES. As far as I can tell, that was just a sanity
check and does not enforce an implementation limit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_marshal.c has one remaining exported function --
svc_rdma_xdr_decode_req -- and it has a single call site. Take
the same approach as the sendto path, and move this function
into the source file where it is called.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Sanity case: Catch the case where more Work Requests are being
posted to the Send Queue than there are Send Queue Entries.
This might happen if a client sends a chunk with more segments than
there are SQEs for the transport. The server can't send that reply,
so the transport will deadlock unless the client drops the RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server displays "svcrdma: failed to post Send WR (-107)" in the
kernel log when the client disconnects. This could flood the server's
log, so remove the message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into nfsd tree
Update to get f0c3192cee "virtio_net: lower limit on buffer size".
That bug was interfering with my nfsd testing.
If you attempt a TCP mount from an host that is unreachable in a way
that triggers an immediate error from kernel_connect(), that error
does not propagate up, instead EAGAIN is reported.
This results in call_connect_status receiving the wrong error.
A case that it easy to demonstrate is to attempt to mount from an
address that results in ENETUNREACH, but first deleting any default
route.
Without this patch, the mount.nfs process is persistently runnable
and is hard to kill. With this patch it exits as it should.
The problem is caused by the fact that xs_tcp_force_close() eventually
calls
xprt_wake_pending_tasks(xprt, -EAGAIN);
which causes an error return of -EAGAIN. so when xs_tcp_setup_sock()
calls
xprt_wake_pending_tasks(xprt, status);
the status is ignored.
Fixes: 4efdd92c92 ("SUNRPC: Remove TCP client connection reset hack")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
pc_count is the only writeable memeber of struct svc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct svc_procinfo, and into a
separate writable array that is pointed to by struct svc_version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the resp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Drop the argp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the p and resp arguments as they are always NULL or can trivially
be derived from the rqstp argument. With that all functions now have the
same prototype, and we can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument. With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
struct rpc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
p_count is the only writeable memeber of struct rpc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct rpc_procinfo, and into a
separate writable array that is pointed to by struct rpc_version and
indexed by p_statidx.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Pass struct rpc_request as the first argument instead of an untyped blob.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pass struct rpc_request as the first argument instead of an untyped blob,
and mark the data object as const.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
bugfixes.
-----BEGIN PGP SIGNATURE-----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=Rtl/
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
We want to use kthread_stop() in order to ensure the threads are
shut down before we tear down the nfs_callback_info in nfs_callback_down.
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: bb6aeba736 ("NFSv4.x: Switch to using svc_set_num_threads()...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Refactor to separate out the functions of starting and stopping threads
so that they can be used in other helpers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
New Features:
- Break RDMA connections after a connection timeout
- Support for unloading the underlying device driver
Bugfixes and cleanups:
- Mark the receive workqueue as "read-mostly"
- Silence warnings caused by ENOBUFS
- Update a comment in xdr_init_decode_pages()
- Remove rpcrdma_buffer->rb_pool.
-----BEGIN PGP SIGNATURE-----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=F9zg
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-4.12-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFS over RDMA Client Side Changes
New Features:
- Break RDMA connections after a connection timeout
- Support for unloading the underlying device driver
Bugfixes and cleanups:
- Mark the receive workqueue as "read-mostly"
- Silence warnings caused by ENOBUFS
- Update a comment in xdr_init_decode_pages()
- Remove rpcrdma_buffer->rb_pool.
Clean up: These have been replaced and are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
req_maps are no longer used by the send path and can thus be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up. All RDMA Write completions are now handled by
svc_rdma_wc_write_ctx.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The sge array in struct svc_rdma_op_ctxt is no longer used for
sending RDMA Write WRs. It need only accommodate the construction of
Send and Receive WRs. The maximum inline size is the largest payload
it needs to handle now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace C structure-based XDR decoding with pointer arithmetic.
Pointer arithmetic is considered more portable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever