- struct thread_info moved off-stack (also touching
include/linux/thread_info.h and include/linux/restart_block.h)
- cpus_have_cap() reworked to avoid __builtin_constant_p() for static
key use (also touching drivers/irqchip/irq-gic-v3.c)
- Uprobes support (currently only for native 64-bit tasks)
- Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1
switching to a reserved page table
- CPU capacity information passing via DT or sysfs (used by the
scheduler)
- Support for systems without FP/SIMD (IOW, kernel avoids touching these
registers; there is no soft-float ABI, nor kernel emulation for
AArch64 FP/SIMD)
- Handling of hardware watchpoint with unaligned addresses, varied
lengths and offsets from base
- Use of the page table contiguous hint for kernel mappings
- Hugetlb fixes for sizes involving the contiguous hint
- Remove unnecessary I-cache invalidation in flush_cache_range()
- CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1)
- Boot-time checks for writable+executable kernel mappings
- Simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart
and make the arm64 kernel headers self-consistent (Xen headers patch
merged separately)
- Workaround for broken .inst support in certain binutils versions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8Uk9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- struct thread_info moved off-stack (also touching
include/linux/thread_info.h and include/linux/restart_block.h)
- cpus_have_cap() reworked to avoid __builtin_constant_p() for static
key use (also touching drivers/irqchip/irq-gic-v3.c)
- uprobes support (currently only for native 64-bit tasks)
- Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1
switching to a reserved page table
- CPU capacity information passing via DT or sysfs (used by the
scheduler)
- support for systems without FP/SIMD (IOW, kernel avoids touching
these registers; there is no soft-float ABI, nor kernel emulation for
AArch64 FP/SIMD)
- handling of hardware watchpoint with unaligned addresses, varied
lengths and offsets from base
- use of the page table contiguous hint for kernel mappings
- hugetlb fixes for sizes involving the contiguous hint
- remove unnecessary I-cache invalidation in flush_cache_range()
- CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1)
- boot-time checks for writable+executable kernel mappings
- simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart
and make the arm64 kernel headers self-consistent (Xen headers patch
merged separately)
- Workaround for broken .inst support in certain binutils versions
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits)
arm64: Disable PAN on uaccess_enable()
arm64: Work around broken .inst when defective gas is detected
arm64: Add detection code for broken .inst support in binutils
arm64: Remove reference to asm/opcodes.h
arm64: Get rid of asm/opcodes.h
arm64: smp: Prevent raw_smp_processor_id() recursion
arm64: head.S: Fix CNTHCTL_EL2 access on VHE system
arm64: Remove I-cache invalidation from flush_cache_range()
arm64: Enable HIBERNATION in defconfig
arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
arm64: xen: Enable user access before a privcmd hvc call
arm64: Handle faults caused by inadvertent user access with PAN enabled
arm64: Disable TTBR0_EL1 during normal kernel execution
arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
arm64: Update the synchronous external abort fault description
selftests: arm64: add test for unaligned/inexact watchpoint handling
arm64: Allow hw watchpoint of length 3,5,6 and 7
arm64: hw_breakpoint: Handle inexact watchpoint addresses
...
to basically boot.
-----BEGIN PGP SIGNATURE-----
iQEtBAABCAAXBQJYNvxvEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYH13Af9
GN3Rx9JrPOKxmp8yQrjf2IvtbRCNcyJsYAcT2C33KFrT+jZE087i+BdMZ9cniwr/
Y3w2JLyi6DS2aeoEZnYDsSQiBNudKKOeyDih5uI+oFDPQfmmfPfjuJUW5NrnpHSd
SLmXADAwjkB46o7Z1gFwquhXB+LcxjsYE5eu7Eda4pSHuBw2ZtNMMrZNDujJx/vU
zu36utDBWYFx6yMx32U1TYz3pf9cbi784j/Y5wr1zSCmuOgS2AZpl8KFC//92ZtU
Wi8T3sRBupun99/pVj+xvWtB9aHdWr8QxeVkRIUhx5XpM7njy9rX7QcJIDMm4kBf
uSbKZCh/uAjRjT/TpQiOsw==
=Fv2o
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rockchip-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/arm64
Pull "Rockchip defconfig64 changes for 4.10" from Heiko Stübner:
64bit defconfig changes to allow arm64 Rockchip socs
to basically boot.
* tag 'v4.10-rockchip-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb
arm64: defconfig: enable RK808 components
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
The sysfs ABI to GPIO is marked obsolete and should not be
encouraged. Users should be encouraged to switch to using the
character device.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following changes:
- Eric updates the ARMv8 defconfig to contain everything that is needed to run
a 64-bit kernel on the Raspberry Pi 3
- Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig
- Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig
-----BEGIN PGP SIGNATURE-----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=mWnY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.10/defconfig-arm64' of http://github.com/Broadcom/stblinux into next/arm64
Pull "Broadcom defconfig-arm64 changes for 4.10" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10,
please pull the following changes:
- Eric updates the ARMv8 defconfig to contain everything that is needed to run
a 64-bit kernel on the Raspberry Pi 3
- Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig
- Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig
* tag 'arm-soc/for-4.10/defconfig-arm64' of http://github.com/Broadcom/stblinux:
ARM64: bcm2835: add thermal driver to default config
arm64: defconfig: enable EEPROM_AT25 config option
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
The default value of 17 for CONFIG_LOG_BUF_SHIFT is much more suitable
than 14. The latter easily leads to lost kernel messages on systems with
only one CPU core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Enable additional options necessary to boot rk3399-based boards to
boot from either emmc or usb devices, like the arasan sdhci and its phy
as well as the usb2 phy and general rockchip power-domain support.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[added rk808-rtc as module and rk808-clk output built in]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C and MMC are very basic modules for a board to bootup, as I2C always
used to configure PMIC and MMC devices often used to store filesytem.
So enable them here to let the rockchip based arm64 boards can bootup.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Given the mimimal hardware support for msm899(2/4) currently.
A few config options are needed to allow for continued
development and booting.
The following are needed for continued development and
booting:
-8994 pinctrl for serial support
-Enable Global Glock Controller (gcc)
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the thermal driver for bcm2837 to list of compiled modules
in the default config.
Changelog:
V7 -> V8: rebased
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
* Enable R-Car DU and related drivers as modules in defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ztt2
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Renesas ARM64 Based SoC Defconfig Updates for v4.10
* Enable R-Car DU and related drivers as modules in defconfig
* tag 'renesas-arm64-defconfig-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable support for on board SPI EEPROM by setting
CONFIG_EEPROM_AT25=m
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch adds CONFIG_HIBERNATION to the arm64 defconfig.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Extend the ARM64 defconfig to enable the DU DRM device as module
together with required dependencies of V4L2 FCP and VSP modules.
This enables VGA output on the r8a7795 Salvator-X board.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable MMC related defaults configs for MMC, PWM and PWM clock.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Most of the drivers are included as modules, except for serial (needed
for early console), WDT (required for reboot), and the dependency
chain of RASPBERRYPI_POWER (which is currently not buildable as a
module, but should be changed).
Signed-off-by: Eric Anholt <eric@anholt.net>
Enable CONFIG_GPIO_XGENE_SB.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Enable ZTE ZX family support in arm64 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX25FiAAoJEFBXWFqHsHzOzJ4IAKAxI7W3Ubnhdxdu8akLYm6a
VHtnqSyr43kKCUEbg05+oTmPzXVF7YdnYmZpyy2mhA9+wpGC6vSwtSDM6Tj8KN8H
ZGzR5Op94GPN3RnLRyGlplltMEbH4I8l6A7SsiJ5VB4Uab2x4bmBagW/vG0O+XuP
exzGQoqlrI5N2gmiSf6P+2Y1oEM+JvClvWPdb9zkMb0B4i8kNJgh+efyNaCv7m/R
v0s9f9AhhK3Saj2TSaJuGuZNHw9vZpDUiOuyTOvnc35bJLjy0AsWqw4BfK8NegQE
4tgXiyVdZxOHvUtAQgw7b2Wkcxo+407zDJE1q6HxR2uudpuTHm0hyWxN62MuXm8=
=zgWs
-----END PGP SIGNATURE-----
Merge tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64
Pull "ZTE arm64 defconfig updates for 4.9" from Shawn Guo:
- Enable ZTE ZX family support in arm64 defconfig
* tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable ZTE ZX related config
Enable common modules for power management; one is to enable
CPUFREQ_DT driver; the driver is used by many platforms by passing OPP
table from device tree.
Also enables thermal related drivers. Firstly we need enable
configuration CPU_THERMAL for CPU cooling device driver, this will bind
thermal zone with CPU cooling device; and enable 'power allocator'
thermal governor.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add PCIe driver for Aardvark for Armada 3700
- enable xhci-platform for A7K/A8K
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQewACgkQCwYYjhRyO9WrKgCeJWuHOFUlMYoZqEYKkdA5aJ9G
iPsAoIFQivT7yCn9p7rJKzKt2NI4skoy
=jIwM
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu into next/arm64
Pull "mvebu defconfig64 for 4.9 (part 1)" from Gregory CLEMENT:
- add PCIe driver for Aardvark for Armada 3700
- enable xhci-platform for A7K/A8K
* tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: enable PCIe driver for Aardvark
arm64: defconfig: enable xhci-platform
drivers/char/hw_random/Kconfig has 'default m', so
simply removing this entry from the defconfig will
enable building HW random drivers as modules.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y80h
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi into next/arm64
Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu:
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
* tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi:
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs
and already enabled in the DT of the r8a7795/salvator-x (H3).
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables the driver for the PCIe host controller found on the
Marvell Armada 3700 ARM64 SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable the following items for bluetooth mouse and speaker which base
on HCIUART.
a) CONFIG_BT_HCIUART
b) CONFIG_BT_HCIUART_LL
c) CONFIG_BT_HIDP
Enable bluetooth LED support.
d) CONFIG_BT_LEDS
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN
Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511
Build these components as modules.
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Now that ACPI is on in the defconfig, the time seems right to enable
drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI
tables of the QDF2432 server platform.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is
just a tag name (or with a '+' appended if HEAD is not a tagged
commit).
During the development (and especially when git-bisecting), longer
version string would be helpful to identify the commit we are running.
This is a default y option, so drop the unset to enable it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable options commonly needed by popular virtualization
and container applications. Use modules when possible to
avoid too much overhead for users not interested.
- add namespace and cgroup options needed
- add seccomp - optional, but enhances Qemu etc
- bridge, nat, veth, macvtap and multicast for routing
guests and containers
- btfrs and overlayfs modules for container COW backends
- while near it, make fuse a module instead of built-in.
Generated with make saveconfig and dropping unrelated spurious
change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:
add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
....
Total: Before=10515408, After=10604060, chg +0.84%
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some ARM64 platforms (for example the Marvell Armada 7K/8K) use the
generic XHCI platform driver, so it makes sense to enable
CONFIG_USB_XHCI_PLATFORM=y in the defconfig to support XHCI on such
platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes to platform code for 64-bit ARM platforms.
Nearlt all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Added platforms for this release are:
- Broadcom BCM2837
- Renesas R8A7796
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vsam
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull 64-bit ARM SoC updates from Olof Johansson:
"Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Added platforms for this release are:
- Broadcom BCM2837
- Renesas R8A7796"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: remove duplicate PWM entry in defconfig
arm64: Update default configuration
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433
arm64: amlogic: select gxbb clk driver
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
arm64: marvell: enable Armada 3700 clock drivers
arm64: defconfig: enable msm8996 pinctrl support
arm64: defconfig: Enable qcom msm8996 clk drivers
arm: defconfig: Enable PM8941 pwr key
arm64: defconfig: enable stmmac and realtek PHY as modules
arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS
arm64: defconfig: enable SENSORS_ARM_SCPI
arm64: defconfig: enable Generic on-chip SRAM driver
arm64: configs: enable PCIe driver for Armada 7K/8K
arm64: Add platform selection for BCM2835.
arm64: defconfig: disable plain NEON implementation of AES
arm64: Allow for different DMA and CPU bus offsets
arm64: defconfig: enable Renesas R8A7796 SoC
arm64: defconfig: Enable Cadence MACB/GEM support
ARM64: Kconfig: Select the Amlogic Meson pin controller driver
...
We merged two patches that both enabled CONFIG_PWM, leading to a harmless
warning:
arch/arm64/configs/defconfig:352:warning: override: reassigning to symbol PWM
This removes one of the two identical lines to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable a bunch of configuration options to enable PMIC, regulators, DSI,
HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that
are now functional on the Google Pixel C.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=483Z
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/arm64
Merge "arm64: tegra: Default configuration updates for v4.8-rc1" from Thierry Reding:
Enable a bunch of configuration options to enable PMIC, regulators, DSI,
HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that
are now functional on the Google Pixel C.
* tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: Update default configuration
Enable a couple of drivers that are used on Jetson TX1:
* GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO
expander are used on Jetson TX1 to expand the number of usable GPIOs
on the I/O board. Enable the driver for this expander along with IRQ
support.
* MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620,
RTC_DRV_MAX77686: Enable support for the PMIC and various of its
components found on the Jetson TX1 processor module (p2180).
* RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on
boards, but it can be useful as a wakeup source from suspend to RAM.
* REGULATOR_PWM: The GPU is supplied by a regulator controlled via one
of the Tegra's PWM channels.
* DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an
optional DSI panel on Jetson TX1 as well as the GPU.
* BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if
shipped with a display module, is driver by an LP8557.
* PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on
Jetson TX1.
* PWM, PWM_TEGRA: One of the PWM channels is used to control the
voltage supplied to the GPU.
* NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol
to increase compatibility with distributions.
* MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable
the ChromeOS Embedded Controller and the I2C tunnel that allows the
EC to function as an I2C bridge.
* BATTERY_BQ27XXX: Support the battery charger and monitor found on
the Google Pixel C.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable more drivers for IP blocks for existing Exynos7 and upcoming
Exynos5433:
1. SPI,
2. Watchdog,
3. USB: DWC3, Exynos EHCI and OHCI,
4. Exynos ADC,
5. Samsung PWM.
These are already used by Exynos7 Espresso board or will be used by
Exynos5433 based board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
The S3C RTC controller on Exynos7 platform uses RTC source clock
from S2MPS11 PMIC. This patch enables the required drivers to make
RTC work on Exynos7 Espresso board.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
1. Enable support for SCPI based sensors(temperature, voltage,
current and power)
2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based
communication with SCP on Juno
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r5Ie
-----END PGP SIGNATURE-----
Merge tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/arm64
ARMv8 Juno/Vexpress defconfig updates for v4.8
1. Enable support for SCPI based sensors(temperature, voltage,
current and power)
2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based
communication with SCP on Juno
* tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: defconfig: enable SENSORS_ARM_SCPI
arm64: defconfig: enable Generic on-chip SRAM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the PCIe host controller found on the Armada 7K/8K SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAldpA7YACgkQCwYYjhRyO9UpFwCgoVM2L6jaF0AU9Yg+aR8xeHrF
5xUAnRCe8B0TYqE0Bucj+MwmKXbWTLU7
=sEoy
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu defconfig64 for 4.8 (part 1)
- Enable the PCIe host controller found on the Armada 7K/8K SoCs
* tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: enable PCIe driver for Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables pinctrl support required to boot msm8996/apq8096
boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the clk drivers on msm8996. This allows us to boot and
test most device drivers on this SoC.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Some Amlogic GXBB boards use the stmmac ethernet driver. Also, enable
the realtek PHY used on meson-gxbb-odroidc2. The micrel PHY used on the
meson-gxbb-p20x boards is already enabled.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
ARM SCPI Sensors were merged for v4.4 and they are defined in the Juno
dts. Enable it in the defconfig to get them registered automatically in
Juno by default.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most of the ARM SoCs have small SRAM memory used for various purposes
that require faster access to data compared to normal DDR.
This patch enables the Generic on-chip SRAM driver on ARM64.
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch enables the driver for the PCIe host controller found on
the Marvell Armada 7K/8K ARM64 SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The plain NEON implementation of AES is only suited for v8 cores that lack
the ARMv8 Crypto Extensions but have an implementation of the NEON tbl/tbx
instruction that is not pathetically slow. Unfortunately, this is currently
the empty set, so there is no point in including this implementation by
default. So disable it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables the Renesas R8A7796 SoC in the arm64 defconfig.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables the cadence MACB/GEM support that is needed
by lg1k SoCs.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull watchdog updates from Wim Van Sebroeck:
- add support for Fintek F81865 Super-IO chip
- add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based
SoCs from Renesas
- octeon: Handle the FROZEN hot plug notifier actions
- f71808e_wdt fixes and cleanups
- some small improvements in code and documentation
* git://www.linux-watchdog.org/linux-watchdog:
MAINTAINERS: Add file patterns for watchdog device tree bindings
Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
watchdog: shwdt: Use setup_timer()
watchdog: cpwd: Use setup_timer()
arm64: defconfig: enable Renesas Watchdog Timer
watchdog: renesas-wdt: add driver
watchdog: remove error message when unable to allocate watchdog device
watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
watchdog: f71808e_wdt: Fix typo
watchdog: f71808e_wdt: Add F81865 support
watchdog: sp5100_tco: properly check for new register layouts
watchdog: core: Fix circular locking dependency
watchdog: core: fix trivial typo in a comment
watchdog: hpwdt: Adjust documentation to match latest kernel module parameters.
watchdog: imx2_wdt: add external reset support via dt prop
watchdog: octeon: Handle the FROZEN hot plug notifier actions.
watchdog: qcom: Report reboot reason
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol
that got renamed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ecJp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol that
got renamed"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
ARM: u8500_defconfig: update sensor config
ARM: u8500_defconfig: remove staging from defconfig
ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
ARM: at91: sama5: Update defconfig
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
ARM: multi_v7_defconfig: add Atmel watchdog timers
ARM: multi_v7_defconfig: add HLCDC drivers as modules
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
...
One new platform gets added this time: The Cortex-A53 based LG Electronics
LG1K platform used in digital TVs.
The other changes are mostly smaller updates to the defconfig files, to
enable additional platform specific drivers, as they get merged through
the subsystem trees.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ISkf
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"One new platform gets added this time: The Cortex-A53 based LG
Electronics LG1K platform used in digital TVs.
The other changes are mostly smaller updates to the defconfig files,
to enable additional platform specific drivers, as they get merged
through the subsystem trees"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: configs: add options useful for Armada 7K/8K support
arm64: defconfig: Add Juno SATA controller
arm64: defconfig: enable freescale/nxp config options
arm64: defconfig: enable 48-bit virtual addresses
arm64: defconfig: cleanup the defconfig
MAINTAINERS: update entry for Marvell ARM platform maintainers
arm64: marvell: enable AP806 and CP110 syscon driver
arm64: Kconfig: select sp804 timer for ARCH_HISI
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
arm64: defconfig: enable several common USB network adapters
arm64: defconfig: add CONFIG_SPI_SPIDEV as module
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
arm64: defconfig: Add Renesas R-Car USB 3.0 driver support
MAINTAINERS: add Chanho Min as ARM/LG1K maintainer
arm64: defconfig: enable ARCH_LG1K
arm64: add Kconfig entry for LG1K SoC family
arm64: defconfig: Enable PL330 DMA controller
arm64: defconfig: enable basic boot for Amlogic meson
- update arm64 defconfig with options useful for Armada 7K/8K support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcx85oACgkQCwYYjhRyO9VvdACfZUGxgpLlq3bpu0TymeLZfbfn
4qYAmwT6iwH3Vnu/mYeXRUP81EsBUNyk
=hgwZ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.7-1' of git://git.infradead.org/linux-mvebu into next/arm64
Merge "mvebu defconfig for arm64 for 4.7" from Gregory CLEMENT:
- update arm64 defconfig with options useful for Armada 7K/8K support
* tag 'mvebu-defconfig64-4.7-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: add options useful for Armada 7K/8K support
This commit updates the ARM64 defconfig to include additional options
useful to support the Armada 7K/8K platforms:
- the SPI controller driver, spi-orion
- the support for SPI flashes
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The ARM Juno (r1 and r2) boards feature a SATA controller soldered
on the board and connected to the PCI bus.
Add the respective driver to defconfig to get hard disks supported out
of the box on the Junos.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Clean up defconfig with savedefconfig
- Enable 48-bit virtual address support
- Enable driver support for various Freescale/NXP devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXKL+fAAoJEFBXWFqHsHzOLcIH/26qqItBXLZ8k/wMVjvRTpud
7jmZbZTBtl9p+q3CnMyOSoBSWK7ov45SQBDYH0PCNiYgMlRIGA0vli8WGBt/BGo5
NS0p81aCPf7QmE1t4A3HPiteTY4iJOkFwiguC+UOwXlmJ3CmK+07MqaTiUDW+fHV
EVftBG+LHF555JO4vxXXVqF+jHM89ZzLI2G3jjIbn9qjPdmzEF/WYd+H8qVnLTwv
geZ7C9/E3KqsRS1xyBdkK0TbjNPGadu0HrbyRaOTXICD27DxiwipOPa7ScriVYrd
+1mvG85Zwn8lVi4Vrl4A9FSwYSEcDzLqr2vG8Wnbffn0OtpLvp/f+60EOAaK2uM=
=CiZ+
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64
Merge "The arm64 defconfig update for Freescale/NXP support" from Shawn Guo:
- Clean up defconfig with savedefconfig
- Enable 48-bit virtual address support
- Enable driver support for various Freescale/NXP devices
* tag 'imx-defconfig64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable freescale/nxp config options
arm64: defconfig: enable 48-bit virtual addresses
arm64: defconfig: cleanup the defconfig
* Add Renesas R-Car USB 3.0 driver support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MGPx
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Merge "Renesas ARM64 Based SoC Defconfig Updates for v4.7" from Simon Horman:
* Add Renesas R-Car USB 3.0 driver support
* tag 'renesas-arm64-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Add Renesas R-Car USB 3.0 driver support
Some armv8 SoCs (e.g. ls2080a) have physical memory maps with discontiguous
DDR regions that require 48-bit VA to have the linear map cover the entire
range of DDR.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When doing:
make defconfig
make savedefconfig
...without making any changes, the newly saved defconfig does
not match arch/arm64/configs/defconfig, and the diff looks
like:
$ diff defconfig arch/arm64/configs/defconfig
3a4
> CONFIG_FHANDLE=y
Clean that up by committing the output of savedefconfig.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable ACPI by default to support testing of ACPI only systems and
ensure that defconfig will boot on anything, for arm64 this is not done
in Kconfig since a very large proportion of arm64 systems have no ACPI
at all.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Roy Franz <roy.franz@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HTRw
-----END PGP SIGNATURE-----
Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman:
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
* tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
PCI: rcar-pcie: Remove Gen2 designation from Kconfig
- Enable Hi655x PMIC and regulator
- Enable SPI_SPIDEV as module
- Enable several common USB-Ethernet dongles
- Enable configs for WLAN and TI WL1835 as modules
- Enable ARM SP804 for ARCH_HISI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Q1Jq
-----END PGP SIGNATURE-----
Merge tag 'hi6220-config-for-4.7v3' of git://github.com/hisilicon/linux-hisi into next/arm64
Merge "ARM64: Hi6220: configure updates for 4.7 based on rc3" from Wei Xu:
- Enable Hi655x PMIC and regulator
- Enable SPI_SPIDEV as module
- Enable several common USB-Ethernet dongles
- Enable configs for WLAN and TI WL1835 as modules
- Enable ARM SP804 for ARCH_HISI
* tag 'hi6220-config-for-4.7v3' of git://github.com/hisilicon/linux-hisi:
arm64: Kconfig: select sp804 timer for ARCH_HISI
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
arm64: defconfig: enable several common USB network adapters
arm64: defconfig: add CONFIG_SPI_SPIDEV as module
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
This patch enables TI WL1835 and builds as module. It also enables
CFG80211, MAC80211, RFKILL and several CRYPTOs which are required
by WLAN.
96boards HiKey uses TI WLAN/BT combo module WL1835MOD.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The arm64 system is likely to be used as a host computer instead of
embedded devices and adding USB-Ethernet dongles to make it behave as
host PC is mandatory.
Changelog:
v2: Changed drivers to be as modules instead of built-in.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch enables a number of devices currently supported by the Hi6220
and 96boards HiKey. These include
a) Hi655x PMIC and regulator
b) Hi6220 I2C, USB, MMC, mailbox, and reset
c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO
Since b) and c) are already in the 4.6-rc3, so kept a) only in this
patch and updated subject as well.
v2:
- rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
- set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.
Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables PL330 DMA controller found on exynos7 SoCs.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enables basic arch and serial console support for Amlogic meson family
SoCs.
Tested with Amlogic P200 and Hardkernel ODROID-C2 boards.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
A few defconfig updates got dropped on the floor during the merge window,
so I've rounded up the remainder here:
* Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for
msm8916
* CPUFreq support for the Juno platform, using the MHU/SCPI interface
* Removal of the default command line, which assumed a console called
ttyAMA0
* Bits and pieces for the Hi6220 (96Boards HiKey)
Signed-off-by: Will Deacon <will.deacon@arm.com>
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XcED
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung Exynos ARM64 improvements for v4.6:
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
* tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
clk: samsung: Enable COMPILE_TEST for Samsung clocks
clk: Move vendor's Kconfig into CCF menu section
clk: mediatek: Fix memory leak on clock init fail
clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h
clk: xgene: Remove return from void function
clk: xgene: Add SoC and PMD PLL clocks with v2 hardware
Documentation: Update APM X-Gene clock binding for v2 hardware
clk: s2mps11: remove redundant code
clk: s2mps11: remove redundant static variables declaration
clk: s2mps11: allocate only one structure for clock init
clk: s2mps11: merge two for loops in one
clk-divider: make sure read-only dividers do not write to their register
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
clk: mvebu: Mark ioremapped memory as __iomem
Signed-off-by: Olof Johansson <olof@lixom.net>
Increase the block minors from the default 8 to 16. The db410c board
by default has eMMC rootfs on the 10th partition.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable sdhci and restart functionality for devices based on msm8916 platform.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T9z9
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski:
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
* tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung MFD and related configs
arm64: defconfig: Enable exynos thermal config
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Exynos7 based espresso board uses S2MPS15, a multifunction device.
This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by
the same.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Not a lot of changes for this kernel release, just a new Kconfig option and
some changes to the arm64 defconfig to add Allwinner drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xgyy
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/arm64
Merge "Allwinner configuration changes for ARM64, 4.6 edition" from Maxime Ripard:
Not a lot of changes for this kernel release, just a new Kconfig option and
some changes to the arm64 defconfig to add Allwinner drivers
* tag 'sunxi-config64-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
arm64: add defconfig options for Allwinner SoCs
arm64: Introduce Allwinner SoC config option
* Enable Renesas R-Car Gen3 USB 2.0 phy driver
which is used on the r8a7795/salvator-x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q6w4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Merge "Renesas ARM64 Based SoC Defconfig Updates for v4.6" from Simon Horman:
* Enable Renesas R-Car Gen3 USB 2.0 phy driver
which is used on the r8a7795/salvator-x
* tag 'renesas-arm64-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
Merge "Broadcom defconfig-arm64 changes for 4.6" from Florian Fainelli:
This pull request contains ARM64 defconfig changes for Broadcom SoCs:
- Jayachandran C enables the newly introduced Broadcom Vulcan SoC to the ARM64
defconfig
* tag 'arm-soc/for-4.6/defconfig-arm64' of http://github.com/Broadcom/stblinux:
arm64: defconfig: Add Broadcom Vulcan to defconfig
Enable the Alpine SoC family in the arm64 defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch enables Exynos thermal and related configs for the
TMU found on Exynos7 SoC. This also enables thermal emulation
mode to test trip points.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
With the Allwinner platform now supported, enable it in the defconfig
and add some options to give some decent out-of-the-box experience on
those SoCs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Synopsys DesignWare APB GPIO controller is used by several vender's socs,
like apm/marvell/altera/hisilicon, enable it by default.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Non dt part of the Armada 3700 support:
- Kconfig update
- defconfig update
- documentation update (including MAINTAINERS:)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEUEABECAAYFAlbElN0ACgkQCwYYjhRyO9XkzgCfaYJggCHzsLpMvnTK1bMNgPCY
jYkAmOIRjMJskq40RBXSXpyoJboqyZs=
=tAva
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu arm64 for 4.6 (part 1)
Non dt part of the Armada 3700 support:
- Kconfig update
- defconfig update
- documentation update (including MAINTAINERS:)
* tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable Armada 3700 related config
Documentation: arm: update supported Marvell EBU processors
MAINTAINERS: Extend dts entry for ARM64 mvebu files
arm64: add mvebu architecture entry
irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selected
ARM: mvebu: Use the ARMADA_370_XP_IRQ option
irqchip/armada-370-xp: Allow allocation of multiple MSIs
irqchip/armada-370-xp: Use shorter names for irq_chip
irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriate
irqchip/armada-370-xp: Use the generic MSI infrastructure
irqchip/armada-370-xp: Add Kconfig option for the driver
Signed-off-by: Olof Johansson <olof@lixom.net>
The ARMv8 Exynos family SoCs in Linux kernel are currently:
- Exynos5433 (controlled by ARCH_EXYNOS),
- Exynos7 (controlled by ARCH_EXYNOS7).
It duplicates Kconfig symbols unnecessarily, so consolidate them into
one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS
symbol.
The commit should not bring any visible functional change.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Enable Broadcom Vulcan support in arm64 default configuration. This will
build the device tree needed to boot on a Broadcom Vulcan board.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch enables the configuration for the Armada 3700 family and for
the related driver it uses.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds kconfigs for spmi bus support, pinctrl drivers and usb
related to get USB working on Qualcomm DB410C board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Based on requests, update our defconfig so that:
- We don't build any modules
- PL031 is enabled (RTC emulated by qemu)
- Xen guest support is enabled
- The Uniphier built-in I2C controller is enabled
- PCI host controller drivers for the various arm64 SoCs are enabled
- Device passthrough works on Seattle using SMMU and VFIO
- The Hisilicon IRQ controller (mbigen) is enabled
Signed-off-by: Will Deacon <will.deacon@arm.com>
* Enable CS2000 and Renesas R-Car SATA driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9272
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/config64
Third Round of Renesas ARM64 Based SoC Defconfig Updates for v4.5
* Enable CS2000 and Renesas R-Car SATA driver
* tag 'renesas-arm64-defconfig3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: add CS2000 support
arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of patches enable various drivers and features required by
64-bit Tegra SoCs (Tegra132 and Tegra210).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=e72e
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/config64
ARM: tegra: Default configuration updates for v4.5-rc1
This set of patches enable various drivers and features required by
64-bit Tegra SoCs (Tegra132 and Tegra210).
* tag 'tegra-for-4.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable printk timestamps
arm64: defconfig: Enable squashfs support
arm64: defconfig: Enable sdhci-tegra driver
arm64: defconfig: Enable serial-tegra driver
arm64: defconfig: Enable tegra-apbdma driver
arm64: defconfig: Do not disable Tegra AHB driver
arm64: defconfig: Enable Tegra210 support
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds Renesas sata_rcar driver to defconfig.
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is present on the Renesas r8a7795 SoC and may be
used by the Salvator-X board.
Also enable MICREL_PHY which is used on the Salvator-X board.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch enables the Renesas R-Car H3 SoC together with the
SCIF driver in the arm64 defconfig.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Timestamps in the kernel log can be useful to quickly determine where
time is spent during boot. There are tools that can generate charts of
the boot time, but it's sometimes convenient to see this live and
without the need to go through scripts to parse the logs first.
Also, this option is enabled on a large number of configurations, not
enabling it is confusing because the boot log looks very different from
what one is used to.
Signed-off-by: Thierry Reding <treding@nvidia.com>
squashfs can be a convenient way to use a root filesystem stored as a
file on some other root filesystem.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver is used to service the SDHCI interfaces found on NVIDIA
tegra SoCs. Enabling it allows SD and eMMC cards to be used for the
root filesystem.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver enables the use of the DMA engine from several of the
peripherals found on NVIDIA Tegra SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver is enabled by default on Tegra because it is needed by the
drivers for a number of peripherals.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- __cmpxchg_double*() return type fix to avoid truncation of a long to
int and subsequent logical "not" in cmpxchg_double() misinterpreting
the operation success/failure
- BPF fixes for mod and div by zero
- Fix compilation with STRICT_MM_TYPECHECKS enabled
- VDSO build fix without libgcov
- Some static and __maybe_unused annotations
- Kconfig clean-up (FRAME_POINTER)
- defconfig update for CRYPTO_CRC32_ARM64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ApkD
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes and clean-ups from Catalin Marinas:
"Here's a second pull request for this merging window with some
fixes/clean-ups:
- __cmpxchg_double*() return type fix to avoid truncation of a long
to int and subsequent logical "not" in cmpxchg_double()
misinterpreting the operation success/failure
- BPF fixes for mod and div by zero
- Fix compilation with STRICT_MM_TYPECHECKS enabled
- VDSO build fix without libgcov
- Some static and __maybe_unused annotations
- Kconfig clean-up (FRAME_POINTER)
- defconfig update for CRYPTO_CRC32_ARM64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: suspend: make hw_breakpoint_restore static
arm64: mmu: make split_pud and fixup_executable static
arm64: smp: make of_parse_and_init_cpus static
arm64: use linux/types.h in kvm.h
arm64: build vdso without libgcov
arm64: mark cpus_have_hwcap as __maybe_unused
arm64: remove redundant FRAME_POINTER kconfig option and force to select it
arm64: fix R/O permissions of FDT mapping
arm64: fix STRICT_MM_TYPECHECKS issue in PTE_CONT manipulation
arm64: bpf: fix mod-by-zero case
arm64: bpf: fix div-by-zero case
arm64: Enable CRYPTO_CRC32_ARM64 in defconfig
arm64: cmpxchg_dbl: fix return value type
Defconfig updates are kept separate from other branches mostly to avoid
conflicts between the different categories (driver branch enabling something
that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware platforms.
multi_v7_defconfig, our "generic" config for most 32-bit platforms has
been gone through by Marvell Berlin maintainers and added most options
they need to run on their hardware. Broadcom NSP is also added there,
and the new Atmel SAMA5D2 (added last release). Rockchip also has display
and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KsDh
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig updates are kept separate from other branches mostly to
avoid conflicts between the different categories (driver branch
enabling something that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware
platforms. multi_v7_defconfig, our "generic" config for most 32-bit
platforms has been gone through by Marvell Berlin maintainers and
added most options they need to run on their hardware. Broadcom NSP
is also added there, and the new Atmel SAMA5D2 (added last release).
Rockchip also has display and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: multi_v7_defconfig: enable UniPhier I2C drivers
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
ARM: exynos_defconfig: Disable simplefb support
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable USB Video Class support
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin
ARM: tegra: Update multi_v7_defconfig
ARM: multi_v7_defconfig: Add Atmel SDHCI device
ARM: multi_v7_defconfig: Add Atmel Flexcom device
ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig
ARM: at91/defconfig: update at91_dt defconfig
ARM: at91/defconfig: update sama5 defconfig
ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
ARM: configs: update lpc18xx defconfig
ARM: socfpga_defconfig: enable fpga manager
...
As usual, this is the massive branch we have for each release. Lots of
various updates and additions of hardware descriptions on existing hardware,
as well as the usual additions of new boards and SoCs.
This is also the first release where we've started mixing 64- and 32-bit
DT updates in one branch.
(Specific details on what's actually here and new is pretty easy to tell
from the diffstat, so there's little point in duplicating listing it here.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qY1q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"As usual, this is the massive branch we have for each release. Lots
of various updates and additions of hardware descriptions on existing
hardware, as well as the usual additions of new boards and SoCs.
This is also the first release where we've started mixing 64- and
32-bit DT updates in one branch.
(Specific details on what's actually here and new is pretty easy to
tell from the diffstat, so there's little point in duplicating listing
it here)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
ARM: dts: uniphier: add system-bus-controller nodes
ARM64: juno: disable NOR flash node by default
ARM: dts: uniphier: add outer cache controller nodes
arm64: defconfig: Enable PCI generic host bridge by default
arm64: Juno: Add support for the PCIe host bridge on Juno R1
Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
dts/ls2080a: Update Simulator DTS to add support of various peripherals
dts/ls2080a: Remove text about writing to Free Software Foundation
dts/ls2080a: Update DTSI to add support of various peripherals
doc: DTS: Update DWC3 binding to provide reference to generic bindings
doc/bindings: Update GPIO devicetree binding documentation for LS2080A
Documentation/dts: Move FSL board-specific bindings out of /powerpc
Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
arm64: Rename FSL LS2085A SoC support code to LS2080A
arm64: Use generic Layerscape SoC family naming
ARM: dts: uniphier: add ProXstream2 Vodka board support
ARM: dts: uniphier: add ProXstream2 Gentil board support
...
Merging in the few patches I had kept separate from main next/dt, since others
got merged here directly.
* next/arm64:
arm64: defconfig: Enable PCI generic host bridge by default
arm64: Juno: Add support for the PCIe host bridge on Juno R1
Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
arm64: dts: mt8173: Add clocks for SCPSYS unit
arm64: dts: mt8173: Add subsystem clock controller device nodes
+ Linux 4.3-rc5
CONFIG_CRYPTO_CRC32_ARM64 has been around since commit f6f203faa3
("crypto: crc32 - Add ARM64 CRC32 hw accelerated module") but defconfig
did not automatically enable it.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Make sure that the task scheduler domain hierarchy is set-up correctly
on systems with single or multi-cluster topology.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that pci-host-generic can be used under arm64, enable it by
default so that SBSA compliant systems can use it.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Freescale will be a spinning-out a set of ARMv8 based SoCs which
will be based on a similar overall SoC architecture. So, this patch
converts the existing infrastructure in the arm64/dts, arm64/Kconfig
and arm64/configs to use the generic convention ARCH_LAYERSCAPE
in place of the more specific FSL_LS2085A, to save code duplication
later-on.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch enables a number of devices currently supported by the MSM8916
boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch update defconfig, adds samsung serial and
Synopsys Designware MMC configs related to exynos SoC
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the base DTS for Altera's SoCFPGA Stratix 10 platform.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v4: Add a non-zero ranges property for /soc node
v3: change #address-cells and #size-cells to <2>
change the GIC address to 0xfffc1000
update the GIC virtual CPU reg length to 0x2000
v2: use interrupt-affinity for pmu node
Enable Marvell Berlin SoC family in arm64 defconfig.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds support to Broadcom's iProc family of arm64 based SoCs
in the arm64 Kconfig and defconfig files
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Ceva ahci controller is available on the Xilinx Zynq UltraScale+
MPSoC.
Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[catalin.marinas@arm.com: removed unnecessary defconfig changes]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q6ks
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Kevin Hilman:
"We keep collecting defconfig updates in a separate branch mostly to
encourage people to handle them separately and avoid conflicts between
different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
ARM: multi_v7_defconfig: remove duplicate CONFIG_COMMON_CLK_QCOM=y
ARM: multi_v7_defconfig: Enable display on Trats2 board
ARM64: add GPIO keys to the defconfig
ARM: keystone: defconfig: enable netcp driver by default
ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3
ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR
ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module
ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig
ARM: lpc18xx: remove DEBUG_LL_UART_8250 from defconfig
ARM: multi_v7_defconfig: Make media support modular
ARM: multi_v7_defconfig: Make sound support modular
ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform
ARM: exynos_defconfig: savedefconfig
ARM: exynos_defconfig: Enable display on Trats2 board
ARM: multi_v7_defconfig: Enable OHCI on exynos SoCs
ARM: multi_v7_defconfig: Enable TMU for exynos SoCs
ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos
ARM: multi_v7_defconfig: Enable CPU idle for exynos SoCs
ARM: multi_v7_defconfig: Enable Cypress APA I2C Trackpad support
...
Some of these are for drivers/soc, where we're now putting
SoC-specific drivers these days. Some are for other driver subsystems
where we have received acks from the appropriate maintainers.
Some highlights:
- simple-mfd: document DT bindings and misc updates
- migrate mach-berlin to simple-mfd for clock, pinctrl and reset
- memory: support for Tegra132 SoC
- memory: introduce tegra EMC driver for scaling memory frequency
- misc. updates for ARM CCI and CCN busses
Conflicts:
arch/arm64/boot/dts/arm/juno-motherboard.dtsi
Trivial add/add conflict with our dt branch.
Resolution: take both sides.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=02Gm
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Kevin Hilman:
"Some of these are for drivers/soc, where we're now putting
SoC-specific drivers these days. Some are for other driver subsystems
where we have received acks from the appropriate maintainers.
Some highlights:
- simple-mfd: document DT bindings and misc updates
- migrate mach-berlin to simple-mfd for clock, pinctrl and reset
- memory: support for Tegra132 SoC
- memory: introduce tegra EMC driver for scaling memory frequency
- misc. updates for ARM CCI and CCN busses"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
drivers: soc: sunxi: Introduce SoC driver to map SRAMs
arm-cci: Add aliases for PMU events
arm-cci: Add CCI-500 PMU support
arm-cci: Sanitise CCI400 PMU driver specific code
arm-cci: Abstract handling for CCI events
arm-cci: Abstract out the PMU counter details
arm-cci: Cleanup PMU driver code
arm-cci: Do not enable CCI-400 PMU by default
firmware: qcom: scm: Add HDCP Support
ARM: berlin: add an ADC node for the BG2Q
ARM: berlin: remove useless chip and system ctrl compatibles
clk: berlin: drop direct of_iomap of nodes reg property
ARM: berlin: move BG2Q clock node
ARM: berlin: move BG2CD clock node
ARM: berlin: move BG2 clock node
clk: berlin: prepare simple-mfd conversion
pinctrl: berlin: drop SoC stub provided regmap
ARM: berlin: move pinctrl to simple-mfd nodes
pinctrl: berlin: prepare to use regmap provided by syscon
reset: berlin: drop arch_initcall initialization
...
Our SoC branch usually contains expanded support for new SoCs and
other core platform code. Some highlights from this round:
- sunxi: SMP support for A23 SoC
- socpga: big-endian support
- pxa: conversion to common clock framework
- bcm: SMP support for BCM63138
- imx: support new I.MX7D SoC
- zte: basic support for ZX296702 SoC
Conflicts:
arch/arm/mach-socfpga/core.h
Trivial remove/remove conflict with our cleanup branch.
Resolution: remove both sides
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZtPK
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform support updates from Kevin Hilman:
"Our SoC branch usually contains expanded support for new SoCs and
other core platform code. Some highlights from this round:
- sunxi: SMP support for A23 SoC
- socpga: big-endian support
- pxa: conversion to common clock framework
- bcm: SMP support for BCM63138
- imx: support new I.MX7D SoC
- zte: basic support for ZX296702 SoC"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits)
ARM: zx: Add basic defconfig support for ZX296702
ARM: dts: zx: add an initial zx296702 dts and doc
clk: zx: add clock support to zx296702
dt-bindings: Add #defines for ZTE ZX296702 clocks
ARM: socfpga: fix build error due to secondary_startup
MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS
ARM: ep93xx: simone: support for SPI-based MMC/SD cards
MAINTAINERS: update Shawn's email to use kernel.org one
ARM: socfpga: support suspend to ram
ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10
ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5
ARM: EXYNOS: register power domain driver from core_initcall
ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs
ARM: SAMSUNG: Constify platform_device_id
ARM: EXYNOS: Constify irq_domain_ops
ARM: EXYNOS: add coupled cpuidle support for Exynos3250
ARM: EXYNOS: add exynos_get_boot_addr() helper
ARM: EXYNOS: add exynos_set_boot_addr() helper
ARM: EXYNOS: make exynos_core_restart() less verbose
ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout
...
The kernel memtest utility is incredibly useful for detecting memory
problems, but sadly isn't in defconfig.
The memtest itself is only run when the user has explicitly passed a
memtest option on the kernel command line, so simply enabling the option
should not have a negative impact.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Juno board, and likely many other boards, likes to use simple
GPIO keys for input events. Enabled this in the default
ARM64 defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
This patch introduces ARCH_HISI to enable Hisilicon SoC family in
Kconfig and defconfig.
Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Since many boards for ARM, experimental or server alike, will
feature LEDs, let's include LED class and trigger support for
heartbeat and CPU in the defconfig. Many systems (such as the
ARM Juno) will use a system controller "syscon" to access the
LED registers, so include support for this as well.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The main change here is a significant head.S rework that allows us to
boot on machines with physical memory at a really high address without
having to increase our mapped VA range. Other changes include:
- AES performance boost for Cortex-A57
- AArch32 (compat) userspace with 64k pages
- Cortex-A53 erratum workaround for #845719
- defconfig updates (new platforms, PCI, ...)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJVLnQpAAoJELescNyEwWM03RIH/iwcDc0MBZgkwfD5cnY+29p4
m89lMDo3SyGQT4NynHSw7P3R7c3zULmI+9hmJMw/yfjjjL6m7X+vVAF3xj1Am4Al
OzCqYLHyFnlRktzJ6dWeF1Ese7tWqPpxn+OCXgYNpz/r5MfF/HhlyX/qNzAQPKrw
ZpDvnt44DgUfweqjTbwQUg2wkyCRjmz57MQYxDcmJStdpHIu24jWOvDIo3OJGjyS
L49I9DU6DGUhkISZmmBE0T7vmKMD1BcgI7OIzX2WIqn521QT+GSLMhRxaHmK1s1V
A8gaMTwpo0xFhTAt7sbw/5+2663WmfRdZI+FtduvORsoxX6KdDn7DH1NQixIm8s=
=+F0I
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Here are the core arm64 updates for 4.1.
Highlights include a significant rework to head.S (allowing us to boot
on machines with physical memory at a really high address), an AES
performance boost on Cortex-A57 and the ability to run a 32-bit
userspace with 64k pages (although this requires said userspace to be
built with a recent binutils).
The head.S rework spilt over into KVM, so there are some changes under
arch/arm/ which have been acked by Marc Zyngier (KVM co-maintainer).
In particular, the linker script changes caused us some issues in
-next, so there are a few merge commits where we had to apply fixes on
top of a stable branch.
Other changes include:
- AES performance boost for Cortex-A57
- AArch32 (compat) userspace with 64k pages
- Cortex-A53 erratum workaround for #845719
- defconfig updates (new platforms, PCI, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (39 commits)
arm64: fix midr range for Cortex-A57 erratum 832075
arm64: errata: add workaround for cortex-a53 erratum #845719
arm64: Use bool function return values of true/false not 1/0
arm64: defconfig: updates for 4.1
arm64: Extract feature parsing code from cpu_errata.c
arm64: alternative: Allow immediate branch as alternative instruction
arm64: insn: Add aarch64_insn_decode_immediate
ARM: kvm: round HYP section to page size instead of log2 upper bound
ARM: kvm: assert on HYP section boundaries not actual code size
arm64: head.S: ensure idmap_t0sz is visible
arm64: pmu: add support for interrupt-affinity property
dt: pmu: extend ARM PMU binding to allow for explicit interrupt affinity
arm64: head.S: ensure visibility of page tables
arm64: KVM: use ID map with increased VA range if required
arm64: mm: increase VA range of identity map
ARM: kvm: implement replacement for ld's LOG2CEIL()
arm64: proc: remove unused cpu_get_pgd macro
arm64: enforce x1|x2|x3 == 0 upon kernel entry as per boot protocol
arm64: remove __calc_phys_offset
arm64: merge __enable_mmu and __turn_mmu_on
...
Enable a few useful options in our defconfig:
- New platform support (exynos7, seattle, tegra132)
- SKY2 (ethernet in newer revisions of Juno)
- Xgene reboot support
- Virtio-pci for kvmtool and qemu
- EFIVAR_FS (previously selected as a module)
- NFSv4
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARM32 and ARM64 have the same DT definitions and the same approaches.
The generic ARM cpuidle driver can be put in common for those two
architectures.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Rob Herring <robherring2@gmail.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Adds support for Spreadtrum's SoC Platform in the arm64 Kconfig and
defconfig files.
Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig.
Enable MSM8916 clock, pin control, and MSM serial driver utilized by
MSM8916 and Qualcomm SoCs in general.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
The 64-bit set of updates this release cycle adds support for three new platforms:
- Samsunc Exynos 7
- Freescale LS2085a
- Mediatek MT8173
For all these, the changes mostly consititude additions of DT contents,
but also some Kconfig entries to allow dependency/selection of drivers
per-platform, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FuwP
-----END PGP SIGNATURE-----
Merge tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes and additions from Olof Johansson:
"The 64-bit set of updates this release cycle adds support for three
new platforms:
- Samsunc Exynos 7
- Freescale LS2085a
- Mediatek MT8173
For all these, the changes mostly consititude additions of DT
contents, but also some Kconfig entries to allow dependency/selection
of drivers per-platform, etc"
* tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: Kconfig: clean up two no-op Kconfig options from CONFIG_ARCH_TEGRA*
arm64: Fix sort of platform Kconfig entries
arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig
arm64: Add DTS support for FSL's LS2085A SoC
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig
arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile
Document: DT: Add bindings for mediatek MT8173 SoC Platform
arm64: Add Tegra132 support
arm64: Enable ARMv8 based exynos7 SoC support
arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7
arm64: dts: Add PMU DT node for exynos7 SoC
arm64: dts: Add initial pinctrl support to exynos7
arm64: dts: Add initial device tree support for exynos7
This patch adds support for FSL's LS2085A SoC in the arm64 Kconfig
and defconfig files.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnab Basu <arnab_basu@rocketmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The usual defconfig tweaks, this time:
- FHANDLE and AUTOFS4_FS to keep systemd happy
- PID_NS, QUOTA and KEYS to keep LTP happy
- Disable DEBUG_PREEMPT, as this *really* hurts performance
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch enables a few things missing from our defconfig:
- PCI and MSI, including support for the x-gene host controller
- BPF JIT
- SPI, GPIO and MMC for Seattle
- GPIO for x-gene
- USB for Juno
- RTC
It also removes HMC_DRV, which was being built as a module for some
reason.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch enables CLCD support for the VE platform emulated by the
ARMv8 software model (DT bindings are based on Pawel's vexpress
patches) together with defconfig entries for SERIO_AMBAKMI and
FB_ARMCLCD.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Starting with 3.18, we are merging SoC-specific changes for arm64 through
the arm-soc tree, like we have been doing for arm32.
This time, there is only one set of changes, adding support for the
Cavium "Thunder" Soc family. Since the changes are relatively small,
this includes Kconfig, defconfig and DT changes.
If all goes well, we will never require adding actual C source code
for platform support in arm64, given that the architecture is more
clearly defined and we have moved out a lot of the platform specifics
into device drivers for arm32 already.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=sqqq
-----END PGP SIGNATURE-----
Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM64 SoC changes from Arnd Bergmann:
"Starting with 3.18, we are merging SoC-specific changes for arm64
through the arm-soc tree, like we have been doing for arm32.
This time, there is only one set of changes, adding support for the
Cavium "Thunder" Soc family. Since the changes are relatively small,
this includes Kconfig, defconfig and DT changes.
If all goes well, we will never require adding actual C source code
for platform support in arm64, given that the architecture is more
clearly defined and we have moved out a lot of the platform specifics
into device drivers for arm32 already"
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64, defconfig: Enable Cavium Thunder SoC in defconfig
arm64, thunder: Add Kconfig option for Cavium Thunder SoC Family
arm64, thunder: Document devicetree bindings for Cavium Thunder SoC
arm64, thunder: Add initial dts for Cavium Thunder SoC
This patch enables Thunder SoCs in the arm64 defconfig. This is
esp. useful to add Thunder platforms to automated builds based on
arm64 defconfig.
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently when run on an APM platform the ARMv8 defconfig has no viable
options for rootfs other than ramdisk which is rather limiting. Since
we already have both SATA and the bits needed for NFS root enabled we just
need to enable the relevant drivers so do that, helping enable direct
testing of upstream.
If the configuration ends up becoming too big we can consider modularising
some of the drivers and asking people to use an initramfs but for now this
is not an issue.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Matching x86 and making it more convenient to run the arm64 default
kernel as distros like Ubuntu need this option.
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When running as a kvm guest on a para-virtualised platform, it is useful
to have virtio implementations of console, 9pfs and network.
This adds these options to the arm64 defconfig, so we can easily run a
defconfig kernel build as both host and as a kvm guest.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Whilst our defconfig is certainly usable, there are a few extra features
we can enable to make it considerably more useful, particularly if
people are using it for testing:
- KVM
- SWAP
- Hugepages
- ARMv8 crypto
This patch enables these options in our defconfig. Note that the ordering
has changed slightly, since this is the result of a new savedefconfig
make target.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
FPGA implementations of the Cortex-A57 and Cortex-A53 are now available
in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for
Versatile Express. As these attach to a Motherboard Express V2M-P1 it
would be useful to have support for some V2M-P1 peripherals enabled by
default.
Additionally a couple of of features have been introduced since the last
defconfig update (CMA, jump labels) that would be good to have enabled
by default to ensure they are build and boot tested.
This patch updates the arm64 defconfig to enable support for these
devices and features. The arm64 Kconfig is modified to select
HAVE_PATA_PLATFORM, which is required to enable support for the
CompactFlash controller on the V2M-P1.
A few options which don't need to appear in defconfig are trimmed:
* BLK_DEV - selected by default
* EXPERIMENTAL - otherwise gone from the kernel
* MII - selected by drivers which require it
* USB_SUPPORT - selected by default
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, development on arm64 is aided by a Foundation_v8 emulator
distributed by ARM [1]. To run their kernels, users will execute:
$ ./Foundation_v8 --image linux-system.axf --block-device raring-rootfs
To mount the raring-rootfs filesystem, the kernel parameter should
typically include:
root=/dev/vda
For this device to be present, the kernel must be compiled with
VIRTIO_{MMIO,BLK}. To make this work out-of-the-box, make it part of the
default configuration.
[1]: https://silver.arm.com/browse/FM00A
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Most readily available root filesystems are formatted as EXT4 these
days. For example, see the raring rootfs that the Debian folk is
preparing [1].
[1]: http://people.debian.org/~wookey/bootstrap/rootfs/
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family.
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds the necessary Kconfig entries to enable support for the
ARMv8 software model (Versatile Express platform) together with the
defconfig update.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm
entry for that symbol. It got removed in v2.6.39 because it wasn't
actually used anywhere. There are still no users of DEBUG_ERRORS so
remove this entry too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[catalin.marinas@arm.com: removed option from defconfig]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds Makefile and Kconfig files required for building an
AArch64 kernel.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds