mirror of https://gitee.com/openkylin/linux.git
32637 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
David S. Miller
|
3e394ef2df |
Merge branch 'ieee802154-for-davem-2017-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says: ==================== pull-request: ieee802154-next 2017-12-04 Some update from ieee802154 to *net-next* Jian-Hong Pan updated our docs to match the APIs in code. Michael Hennerichs enhanced the adf7242 driver to work with adf7241 devices and reworked the IRQ and packet handling in the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Sergei Shtylyov
|
bafbdd527d |
phylib: Add device reset GPIO support
The PHY devices sometimes do have their reset signal (maybe even power supply?) tied to some GPIO and sometimes it also does happen that a boot loader does not leave it deasserted. So far this issue has been attacked from (as I believe) a wrong angle: by teaching the MAC driver to manipulate the GPIO in question; that solution, when applied to the device trees, led to adding the PHY reset GPIO properties to the MAC device node, with one exception: Cadence MACB driver which could handle the "reset-gpios" prop in a PHY device subnode. I believe that the correct approach is to teach the 'phylib' to get the MDIO device reset GPIO from the device tree node corresponding to this device -- which this patch is doing... Note that I had to modify the AT803x PHY driver as it would stop working otherwise -- it made use of the reset GPIO for its own purposes... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Propagate actual errors from fwnode_get_named_gpiod()] [geert: Avoid destroying initial setup] [geert: Consolidate GPIO descriptor acquiring code] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Russell King
|
0a6fcd3fc1 |
sfp: add documentation for kernel APIs
Add kernel-doc documentation for sfp kernel APIs, and link it into the networking kapi documentation under "Network device support". Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Russell King
|
8796c8923d |
phylink: add documentation for kernel APIs
Add kernel-doc documentation for phylink kernel APIs, and link it into the networking kapi documentation under "Network device support". Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
David S. Miller
|
7cda4cee13 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Small overlapping change conflict ('net' changed a line,
'net-next' added a line right afterwards) in flexcan.c
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Linus Torvalds
|
49a418d783 |
hwmon fixes for v4.15-rc2
Drop reference to obsolete maintainer tree Fix overflow bug in pmbus driver Fix SMBUS timeout problem in jc42 driver For the SMBUS timeout handling, we had a brief discussion if this should be considered a bug fix or a feature. Peter says "it fixes real problems where the application misbehave due to faulty content when reading from an eeprom", and he needs the patch in his company's v4.14 images. This is good enough for me and warrants backport to stable kernels. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaItAeAAoJEMsfJm/On5mBYrQQAJz+Ukg8blLKg1bqb01nZxEY 4vOxqZySpqR5icW6KP0zn/ws8eKyFjGQQsRxoRePo9Zfj2Y9RKRKVOoRrs7McZ6s mO12KJBf13cGiB+Msm8JsjJv81E15RnDwsWw39+SPms3ueKiBDAl4xaH6PSeGKTZ zB8teDk7MLLwCplRuNbB3qrc0BCj4AgeAu3omHO7PpKClOCHRieJPLaFE2Fpzsu/ P4RxUn4CFY0urgWJ5b9g5A3FdH8lOz8nfkiWPPnEb/IF+8tR9M3GYzwOp5r2uVul uKszDMKKx3Q+Hi+67/Ou2uLhCDnaxYtFHiN+REB9dRi33BHSuIsc4riCqa1ZMz8c XWQLbQq3u0bS1XgiegD4nihF2iNrj0fMcy2dcnUVWJNFKrfHjGAIodY0cKZJsZKW RqzWlX/aUVIpCSKxtJm0xDNPJS5FqKXLCV0xsNMF2Mz2JosT8o4IARZNlY7Ap0Be kRiQMXA/3y2RyeOUi82YHM0MorMt4icmTT3ztRrJpVbM1MBiiX2SefZquai5RLgp o/qTOrJ0gD8XzBhwP8wQYP5BvpPX2UX3V0sjLcRDNakqaOaDuslAMtzZ0sNn37Ng R+sAJNuFkLZkzhsa8IZSidngWMLvGS3Zjh2N75v6HcEaLrVoK2p6rBJM82Dg8cmp 0GwZkjd72bdXIXuRLpri =5rYP -----END PGP SIGNATURE----- Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes: - Drop reference to obsolete maintainer tree - Fix overflow bug in pmbus driver - Fix SMBUS timeout problem in jc42 driver For the SMBUS timeout handling, we had a brief discussion if this should be considered a bug fix or a feature. Peter says "it fixes real problems where the application misbehave due to faulty content when reading from an eeprom", and he needs the patch in his company's v4.14 images. This is good enough for me and warrants backport to stable kernels" * tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) optionally try to disable the SMBUS timeout hwmon: (pmbus) Use 64bit math for DIRECT format values hwmon: Drop reference to Jean's tree |
|
|
Pankaj Bansal
|
525d70a939 |
Documentation: can: flexcan: Add big-endian property to device tree
The FlexCAN controller can be modelled as little or big endian depending on SOC design. This device tree property identifies the controller endianness and the driver reads/writes controller registers based on that. This is optional property. i.e. if this property is not present in device tree node then controller is assumed to be little endian. if this property is present then controller is assumed to be big endian. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> |
|
|
Peter Rosin
|
68615eb01f |
hwmon: (jc42) optionally try to disable the SMBUS timeout
With a nxp,se97 chip on an atmel sama5d31 board, the I2C adapter driver is not always capable of avoiding the 25-35 ms timeout as specified by the SMBUS protocol. This may cause silent corruption of the last bit of any transfer, e.g. a one is read instead of a zero if the sensor chip times out. This also affects the eeprom half of the nxp-se97 chip, where this silent corruption was originally noticed. Other I2C adapters probably suffer similar issues, e.g. bit-banging comes to mind as risky... The SMBUS register in the nxp chip is not a standard Jedec register, but it is not special to the nxp chips either, at least the atmel chips have the same mechanism. Therefore, do not special case this on the manufacturer, it is opt-in via the device property anyway. Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Linus Walleij
|
0fc66ddfaf |
Documentation: net: dsa: Cut set_addr() documentation
This is not supported anymore, devices needing a MAC address just assign one at random, it's just a driver pecularity. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Linus Torvalds
|
a0908a1b7d |
Merge branch 'akpm' (patches from Andrew)
Mergr misc fixes from Andrew Morton: "28 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits) fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate() mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored" autofs: revert "autofs: take more care to not update last_used on path walk" fs/fat/inode.c: fix sb_rdonly() change mm, memcg: fix mem_cgroup_swapout() for THPs mm: migrate: fix an incorrect call of prep_transhuge_page() kmemleak: add scheduling point to kmemleak_scan() scripts/bloat-o-meter: don't fail with division by 0 fs/mbcache.c: make count_objects() more robust Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical" mm/madvise.c: fix madvise() infinite loop under special circumstances exec: avoid RLIMIT_STACK races with prlimit() IB/core: disable memory registration of filesystem-dax vmas v4l2: disable filesystem-dax mapping support mm: fail get_vaddr_frames() for filesystem-dax mappings mm: introduce get_user_pages_longterm device-dax: implement ->split() to catch invalid munmap attempts mm, hugetlbfs: introduce ->split() to vm_operations_struct scripts/faddr2line: extend usage on generic arch ... |
|
|
Michal Hocko
|
90daf3062f |
Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical"
This reverts commit |
|
|
Michael Hennerich
|
44fde7bbcc |
net: ieee802154: adf7242: Add support for ADF7241 devices
This adds support for ADF7241 Low Power IEEE 802.15.4 Zero-IF 2.4 GHz Transceivers Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> |
|
|
Jian-Hong Pan
|
5c7f2accdb |
doc: linux-wpan: Fulfill the description of missed 802.15.4 APIs
There are more functions and operations which must be used or implemented in each IEEE 802.15.4 device driver, but are not mentioned in the Device drivers API section of Documentation/networking/ieee802154.txt. Therefore, I want to fulfill the missed part into the documentation with this patch. Signed-off-by: Jian-Hong Pan <starnight@g.ncu.edu.tw> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> |
|
|
Tobin C. Harding
|
7b1924a1d9 |
vsprintf: add printk specifier %px
printk specifier %p now hashes all addresses before printing. Sometimes we need to see the actual unmodified address. This can be achieved using %lx but then we face the risk that if in future we want to change the way the Kernel handles printing of pointers we will have to grep through the already existent 50 000 %lx call sites. Let's add specifier %px as a clear, opt-in, way to print a pointer and maintain some level of isolation from all the other hex integer output within the Kernel. Add printk specifier %px to print the actual unmodified address. Signed-off-by: Tobin C. Harding <me@tobin.cc> |
|
|
Tobin C. Harding
|
ad67b74d24 |
printk: hash addresses printed with %p
Currently there exist approximately 14 000 places in the kernel where
addresses are being printed using an unadorned %p. This potentially
leaks sensitive information regarding the Kernel layout in memory. Many
of these calls are stale, instead of fixing every call lets hash the
address by default before printing. This will of course break some
users, forcing code printing needed addresses to be updated.
Code that _really_ needs the address will soon be able to use the new
printk specifier %px to print the address.
For what it's worth, usage of unadorned %p can be broken down as
follows (thanks to Joe Perches).
$ git grep -E '%p[^A-Za-z0-9]' | cut -f1 -d"/" | sort | uniq -c
1084 arch
20 block
10 crypto
32 Documentation
8121 drivers
1221 fs
143 include
101 kernel
69 lib
100 mm
1510 net
40 samples
7 scripts
11 security
166 sound
152 tools
2 virt
Add function ptr_to_id() to map an address to a 32 bit unique
identifier. Hash any unadorned usage of specifier %p and any malformed
specifiers.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
|
|
|
Tobin C. Harding
|
553d8e8b10 |
docs: correct documentation for %pK
Current documentation indicates that %pK prints a leading '0x'. This is not the case. Correct documentation for printk specifier %pK. Signed-off-by: Tobin C. Harding <me@tobin.cc> |
|
|
Linus Torvalds
|
02fc87b117 |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar: - topology enumeration fixes - KASAN fix - two entry fixes (not yet the big series related to KASLR) - remove obsolete code - instruction decoder fix - better /dev/mem sanity checks, hopefully working better this time - pkeys fixes - two ACPI fixes - 5-level paging related fixes - UMIP fixes that should make application visible faults more debuggable - boot fix for weird virtualization environment * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable x86/entry/64: Add missing irqflags tracing to native_load_gs_index() x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing x86/pkeys/selftests: Fix protection keys write() warning x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey' x86/mpx/selftests: Fix up weird arrays x86/pkeys: Update documentation about availability x86/umip: Print a warning into the syslog if UMIP-protected instructions are used x86/smpboot: Fix __max_logical_packages estimate x86/topology: Avoid wasting 128k for package id array perf/x86/intel/uncore: Cache logical pkg id in uncore driver x86/acpi: Reduce code duplication in mp_override_legacy_irq() x86/acpi: Handle SCI interrupts above legacy space gracefully x86/boot: Fix boot failure when SMP MP-table is based at 0 x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/selftests: Add test for mapping placement for 5-level paging ... |
|
|
Linus Torvalds
|
6830c8db58 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "Misc fixes: a documentation fix, a Sparse warning fix and a debugging fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix task state recording/printout sched/deadline: Don't use dubious signed bitfields sched/deadline: Fix the description of runtime accounting in the documentation |
|
|
Linus Torvalds
|
844056fd74 |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ... |
|
|
Linus Torvalds
|
5e2fda4776 |
Kbuild updates for v4.15 (2nd)
- Use pwd instead of /bin/pwd for portability - Clean up Makefiles - Fix ld-option for clang - Fix malloc'ed data size in Kconfig - Fix parallel building along with coccicheck - Fix a minor issue of package building - Prompt to use "rpm-pkg" instead of "rpm" - Clean up *.i and *.lst patterns by "make clean" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaGEuYAAoJED2LAQed4NsG1H8P/1cKSZk7G9tA1L7DndvoTNLz oc+wM7dUQ3NBndBsyymGe3/cvmlPoB6tam5otAyHaDjBsiGL6pQAeCi1RjJ24aMO BHb3vUWLh7GiGnIpe9uMNYIghuRpHdK53rkh9uPaKXmLZBSHtOdd81wHlZGsUdyY 6U2HHUM6c6KiueTYuULiP2wXE6u0YhREjb5MUL6SThAoME0tDaf7JnWguo7sKJAv CUlw9196LoDtj/2VRN3Rd9baGefqDw05PYqUZ9RWfCcl/h8gm7Xo9jW8THRLTIj5 hRbqNRDHEBjN0QY1FFghrfQf8Iud7zyZC2bzD+0PeUHtIMsb2zA+0zNzdOLN8y9f VC34LcQjpG4k9jgrRabAt5xJKcKPLA3rBfkZdB36NKnyj0EFndGoR5YaYsINFBrd Asg58Es6OQVINvLdinInpp2GAZAz30zNuF1VivjKgDIUpMw1yU7x5h+Sea3+b5n2 hO439hlQj4Hb5yNrKeDVaOUJ8eY4yIUtGAUm1vFXODdC4y5FcH7aNf5GiY5bxC7n warleTm/DxCV9CI2MANOJmJgC2XgdE7/JNMNvWQnjcmOvhFywyYE65c26QMLIQSM k2L0b26FtlES3aCUUKaAmBvAGEZznturBg0fmpnuIULHvYWf2aLndzWDv6C5LhiQ mC3FAJc1rzDfQR7UsPrs =a2Td -----END PGP SIGNATURE----- Merge tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - use 'pwd' instead of '/bin/pwd' for portability - clean up Makefiles - fix ld-option for clang - fix malloc'ed data size in Kconfig - fix parallel building along with coccicheck - fix a minor issue of package building - prompt to use "rpm-pkg" instead of "rpm" - clean up *.i and *.lst patterns by "make clean" * tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: drop $(extra-y) from real-objs-y kbuild: clean up *.i and *.lst patterns by make clean kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used kbuild: pkg: use --transform option to prefix paths in tar coccinelle: fix parallel build with CHECK=scripts/coccicheck kconfig/symbol.c: use correct pointer type argument for sizeof kbuild: Set KBUILD_CFLAGS before incl. arch Makefile kbuild: remove all dummy assignments to obj- kbuild: create built-in.o automatically if parent directory wants it kbuild: /bin/pwd -> pwd |
|
|
Linus Torvalds
|
7753ea0964 |
Trimmed second batch of KVM changes for Linux 4.15
* GICv4 Support for KVM/ARM
All ARM patches were in next-20171113. I have postponed most x86 fixes
to 4.15-rc2 and UMIP to 4.16, but there are fixes that would be good to
have already in 4.15-rc1:
* re-introduce support for CPUs without virtual NMI (cc stable)
and allow testing of KVM without virtual NMI on available CPUs
* fix long-standing performance issues with assigned devices on AMD
(cc stable)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaGECGAAoJEED/6hsPKofoT08H/AuaMi8qprw2BNpVBbQxWRWM
O4WPk7yz1zB4SkdRNrPzCMBy+qoK7FcV/3BpsFPuQS4NHQ+GvQ87N/7tUbouVyl6
CuPGJMCnNzMQ8GvLOJgB1/sz+uW5W/ph3y8kv1UP3/hNCZU4fqukoUeLroOH/wr6
N3bSY8bok7ycdpgybHmbUHY0Yk4IUk3m0RXWY9U5Jl3sjoNEwCw3pWdrq9Swfs/6
W8QJRdE4Z6KHPqW5sRnPj24IpoUpCxu+IT+gPuGlDUCN/h3sfhYvMS6GgDrCjiiZ
2z1TwaIAo+wGjlBQzGmyTUjUPjbGew+f3ixBlf2BtmNutX+tX2qsVfl1NKXYTto=
=GGge
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"Trimmed second batch of KVM changes for Linux 4.15:
- GICv4 Support for KVM/ARM
- re-introduce support for CPUs without virtual NMI (cc stable) and
allow testing of KVM without virtual NMI on available CPUs
- fix long-standing performance issues with assigned devices on AMD
(cc stable)"
* tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
kvm: vmx: Allow disabling virtual NMI support
kvm: vmx: Reinstate support for CPUs without virtual NMI
KVM: SVM: obey guest PAT
KVM: arm/arm64: Don't queue VLPIs on INV/INVALL
KVM: arm/arm64: Fix GICv4 ITS initialization issues
KVM: arm/arm64: GICv4: Theory of operations
KVM: arm/arm64: GICv4: Enable VLPI support
KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity
KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved
KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source
KVM: arm/arm64: GICv4: Add doorbell interrupt handling
KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS
KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
...
|
|
|
Linus Torvalds
|
c353bfc6eb |
fixes/cleanups for rc1, non-desktop flags for VR
-----BEGIN PGP SIGNATURE-----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=P4O6
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux
Pull more drm updates from Dave Airlie:
"Fixes/cleanups for rc1, non-desktop flags for VR
- remove the MSM dt-bindings file Rob managed to push in the previous
pull.
- add a property/edid quirk to denote HMD devices, I had these
hanging around for a few weeks and Keith had done some work on
them, they are fairly self contained and small, and only affect
people using HTC Vive VR headsets so far.
- amdgpu, tegra, tilcdc, fsl fixes
- some imx-drm cleanups I missed, these seemed pretty small, and no
reason to hold off.
I have one TTM regression fix (fixes bochs-vga in qemu) sitting
locally awaiting review I'll probably send that in a separate pull
request tomorrow"
* tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits)
dt-bindings: remove file that was added accidentally
drm/edid: quirk HTC vive headset as non-desktop. [v2]
drm/fb: add support for not enabling fbcon on non-desktop displays [v2]
drm: add connector info/property for non-desktop displays [v2]
drm/amdgpu: fix rmmod KCQ disable failed error
drm/amdgpu: fix kernel hang when starting VNC server
drm/amdgpu: don't skip attributes when powerplay is enabled
drm/amd/pp: fix typecast error in powerplay.
drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support
drm/tegra: sor: Reimplement pad clock
Revert "drm/radeon: dont switch vt on suspend"
drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence
drm/amd/powerplay: fix unfreeze level smc message for smu7
drm/amdgpu:fix memleak
drm/amdgpu:fix memleak in takedown
drm/amd/pp: fix dpm randomly failed on Vega10
drm/amdgpu: set f_mapping on exported DMA-bufs
drm/amdgpu: Properly allocate VM invalidate eng v2
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
drm/fsl-dcu: avoid disabling pixel clock twice on suspend
...
|
|
|
Linus Torvalds
|
1d3bc6363a |
A few late-arriving docs updates that have no real reason to wait. There's
a new "Co-Developed-by" tag described by Greg, and a build enhancement from Willy to generate docs warnings during a kernel build (but only when additional warnings have been requested in general). -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaFaXjAAoJEI3ONVYwIuV6AXAQAMDinEQQBxNJmO/PkQrIxT4t sgbLfI+Sd9zD/lEb9aC5e99XYqw+SH0H9xtEcOrhwx+fjuzkKa6NKLPWjopGzVxH CM+N7lCE3AFuzbBCmcQvQyEelQg+p7rsY+2MGLYxMZINnaHFgTa1lvamcE/wKu5d CSXs1K2TwFQEpippYlzTmiWU1Rt3gWKGwtBFgLtikSBqiS3HVr4yn7dgm1WTEpVo IZPQYoglHjb8vL/vnVDDsfu1PW6Q1uE1aBSgTFBgFIv3UXJBBSlfWQJ7MQsD12Ww ZkkAxssFm6TRa87mtgd68Du0Ebg4wZQJG9fizCSy6yIh1ExYxvG0rUmqGrZ1rRYu 4F+hukXINn7OK5L2laKNQT8ZWCPP+RoN6YUQpz2dhXC3nULZbd5GI9y8pQTdZjmK p39SIovicQltlw8ap9MkzTKxm4mvLo/wjFWhQT4qH2QENKO8uSqA9BpLt5a1gJU5 dSLKDElph5EhliQAQfN/wXdPnTzSaGovele23zTTOLu2vr2JUSnBWWwiaOwuTHRQ OEdzxQceoINnc/iqC1qt8F/57E8BT76YedAlmsn77umTXq3mq28wkd1RCRFcjqz5 KeqrvC5WMSbWZXZDxow7Pr+CPONUy4WpqVbHbwcQ4V8zlFfGjtQdR6zKN88Mb364 4oJpUwUMz36HchZpi1Tx =ydAe -----END PGP SIGNATURE----- Merge tag 'docs-4.15-2' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A few late-arriving docs updates that have no real reason to wait. There's a new "Co-Developed-by" tag described by Greg, and a build enhancement from Willy to generate docs warnings during a kernel build (but only when additional warnings have been requested in general)" * tag 'docs-4.15-2' of git://git.lwn.net/linux: Add optional check for bad kernel-doc comments Documentation: fix profile= options in kernel-parameters.txt documentation/svga.txt: update outdated file kokr/memory-barriers.txt: Fix typo in paring example kokr/memory-barriers/txt: Replace uses of "transitive" Documentation/process: add Co-Developed-by: tag for patches with multiple authors |
|
|
James Morris
|
ce44cd8dfc |
Keys devel
-----BEGIN PGP SIGNATURE----- iQIVAwUAWhc/3fSw1s6N8H32AQLJxQ/9Gw5ns9bipLQ5VeXjgQjY6U39lHWD7z0e cz1jYsqOGvWXqoHZumK6fB0NorYZ3EEiWTVqNkpTv1p5ZIJe612G3oe5SOTn2gA5 1X4qb/QMCr12TIv/R40mXuEsBUZZaUvxK5G7L7/Ty8a9iC+Pp3Tr009ThPvhfDMc RRP5MHxPghat+jwRcBjMz3ndQCkoTIlR9qichzQcndv5yywASQFxQsHEeG0tK48j NvicJawsr+0kZ2xqpRjRRJ/aQ+lMpI3SLsaUJBbIf6IYFs+i++OUkwAv0WYG0RZa xGjQBaaSmXPp48akIeModsp3SgNwBFpbTiXJR8hdGYjJNaaMNGD5HGQ539Ij+Wpf YHTIsdqw3xfFH/FoHMOesF/h/uMoA1NAMFAy/gGHxRRGNIk0wERHdTpdFUODIx9E NJk2fwBYpO+uRntgcmt9F3S9+YBzxACHYNmjvtbvUwjkr/hnl6jincTmlkmR9Fgl HYy+RcBb9A19wRYnZ5wDFOyk3sua7iq4ZBq0dbpYtSOtR9q4RtFw9wfsT8OoQMKz aBBn8AiV2ak+Qu00MFCyqj3jUoWa/8qzy6/57nWNsqoJTBMD0uI5UY4liTBGeq3g m02uVqtZgwjeBxUmMh8IxZDntVRZChGgvmifwOzb/BUV8oaOiy4aiQjONSdQBeP6 j9SDBLRH/PY= =wuVV -----END PGP SIGNATURE----- Merge tag 'keys-next-20171123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next-keys Merge keys subsystem changes from David Howells, for v4.15. |
|
|
Linus Torvalds
|
5a787756b8 |
pwm: Changes for v4.15-rc1
The changes for this release include power management improvements for the pwm-img driver, support for the backup mode on pwm-atmel-tcb as well as support for more hardware with the R-Car and Mediatek drivers. To round things off there's a bit of cleanup for sunxi and stm32-lp. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAloVVScZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoYitD/9e9MWl5VW4Bz6FHfh1uKNB cwdgTHj4JE/7LA/p2hP7Zzs5xx1Blyf3TDjr2LFB/C6tWVRfve8TN6y4L3Md6Rv/ gdV2Sy9Hg02kMCiLyPihpFKx4aMoiiB3g0nygG5pC/etX6PB+mmH4XocnjpuHOGf s1f2JULEm2C1nfYqzmhGBTiiwSOAPMfPdhvGvS2ydrW5HoCYJ+tK3hnWXBJjYUyk R5zHr7blqT5f7FzA9Rx+5UY5vQlISwUfvdi/EHT7ighgF/dggaBWKuK+R0sCEhq1 AdyrgEEJsXeh9XcCdfKveEJKu8I6zROYeBfrxeZr2Kzl2mTx6a3U0vviI0hLZSPh IrLyo3MnIVcTuZyII07jjM9KePnOYuDjjMc9qDP5QrNJHZI66Qf0f3wzg1QIIW5D +3LXFnlWH59fHwvb80vpSVgI0S9T76W2tLqQfM/pKdOiwYs+A10cQvTwvUHMTerl zHJ4DdEugLoZzJaZto29ilP7DygMjmDkFPh4z9f92d94JskXFfsEU3oSclggMXFy 2xzAm5bNwLibBgwThXUVmP/rR3AFQXDGvjPPK1DIhQxjJb6gjgQNLOvPfgN+kx65 kjc20jEpJxpnXk7y6kecLEEdxO/o/GdysfGfdk/BlOsBMV/BmVX0igpaal9fOqQp 34P+xRbpnmuKU4E8TpT43w== =HLrm -----END PGP SIGNATURE----- Merge tag 'pwm/for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this release include power management improvements for the pwm-img driver, support for the backup mode on pwm-atmel-tcb as well as support for more hardware with the R-Car and Mediatek drivers. To round things off there's a bit of cleanup for sunxi and stm32-lp" * tag 'pwm/for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: stm32-lp: Remove pwm_is_enabled() check before calling pwm_disable() pwm: mediatek: Add MT2712/MT7622 support pwm: sunxi: Use of_device_get_match_data() pwm: atmel-tcb: Support backup mode dt-bindings: pwm: Add R-Car D3 device tree bindings pwm: img: Add runtime PM pwm: img: Add suspend / resume handling |
|
|
Linus Torvalds
|
1b8c5cd890 |
RTC for 4.15
Subsystem:
- Fix setting the alarm to the next expiring timer
New driver:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers:
- Use generic nvmem to expose the Non volatile ram for ds1305, ds1511,
m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume
-----BEGIN PGP SIGNATURE-----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=tRVi
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is nothing scary this cycle, mostly driver fixes and updates.
The core fix has been in for a while and has been tested on multiple
kernel revisions by multiple teams.
Core:
- Fix setting the alarm to the next expiring timer
New drivers:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers updates:
- Use generic nvmem to expose the Non volatile ram for ds1305,
ds1511, m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume"
* tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
dt-bindings: rtc: imxdi: Improve the bindings text
rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
rtc: at91rm9200: fix reading alarm value
rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
rtc: sysfs: Use time64_t variables to set time/alarm
rtc: xgene: mark PM functions as __maybe_unused
rtc: xgene: Fix suspend/resume
rtc: pcf8563: don't alway enable the alarm
rtc: pcf8563: fix output clock rate
rtc: rx8010: Fix for incorrect return value
rtc: rx8010: Specify correct address for RX8010_RESV31
rtc: rx8010: Remove duplicate define
rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
rtc: m41t80: fix m41t80_sqw_round_rate return value
rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
rtc: add support for NXP PCF85363 real-time clock
rtc: omap: Support scratch registers
...
|
|
|
Linus Torvalds
|
14b661ebb6 |
This pull request contains the following core changes:
General changes:
* Unconfuse get_unmapped_area and point/unpoint driver methods
* New partition parser: sharpslpart
* Kill GENERIC_IO
* Various fixes
NAND changes:
* Add a flag to mark NANDs that require 3 address cycles to encode a
page address
* Set a default ECC/free layout when NAND_ECC_NONE is requested
* Fix a bug in panic_nand_write()
* Another batch of cleanups for the denali driver
* Fix PM support in the atmel driver
* Remove support for platform data in the omap driver
* Fix subpage write in the omap driver
* Fix irq handling in the mtk driver
* Change link order of mtk_ecc and mtk_nand drivers to speed up boot
time
* Change log level of ECC error messages in the mxc driver
* Patch the pxa3xx driver to support Armada 8k platforms
* Add BAM DMA support to the qcom driver
* Convert gpio-nand to the GPIO desc API
* Fix ECC handling in the mt29f driver
SPI-NOR changes:
* Introduce system power management support
* New mechanism to select the proper .quad_enable() hook by JEDEC ID,
when needed, instead of only by manufacturer ID
* Add support to new memory parts from Gigadevice, Winbond, Macronix and
Everspin
* Maintainance for Cadence, Intel, Mediatek and STM32 drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wVm7
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd
Pull MTD updates from Richard Weinberger:
"General changes:
- Unconfuse get_unmapped_area and point/unpoint driver methods
- New partition parser: sharpslpart
- Kill GENERIC_IO
- Various fixes
NAND changes:
- Add a flag to mark NANDs that require 3 address cycles to encode a
page address
- Set a default ECC/free layout when NAND_ECC_NONE is requested
- Fix a bug in panic_nand_write()
- Another batch of cleanups for the denali driver
- Fix PM support in the atmel driver
- Remove support for platform data in the omap driver
- Fix subpage write in the omap driver
- Fix irq handling in the mtk driver
- Change link order of mtk_ecc and mtk_nand drivers to speed up boot
time
- Change log level of ECC error messages in the mxc driver
- Patch the pxa3xx driver to support Armada 8k platforms
- Add BAM DMA support to the qcom driver
- Convert gpio-nand to the GPIO desc API
- Fix ECC handling in the mt29f driver
SPI-NOR changes:
- Introduce system power management support
- New mechanism to select the proper .quad_enable() hook by JEDEC
ID, when needed, instead of only by manufacturer ID
- Add support to new memory parts from Gigadevice, Winbond, Macronix
and Everspin
- Maintainance for Cadence, Intel, Mediatek and STM32 drivers"
* tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits)
mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid
mtd: sharpslpart: Add sharpslpart partition parser
mtd: Add sanity checks in mtd_write/read_oob()
mtd: remove the get_unmapped_area method
mtd: implement mtd_get_unmapped_area() using the point method
mtd: chips/map_rom.c: implement point and unpoint methods
mtd: chips/map_ram.c: implement point and unpoint methods
mtd: mtdram: properly handle the phys argument in the point method
mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD'
mtd: slram: use memremap() instead of ioremap()
kconfig: kill off GENERIC_IO option
mtd: Fix C++ comment in include/linux/mtd/mtd.h
mtd: constify mtd_partition
mtd: plat-ram: Replace manual resource management by devm
mtd: nand: Fix writing mtdoops to nand flash.
mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID
mtd: nand: mtk: fix infinite ECC decode IRQ issue
mtd: spi-nor: Add support for mr25h128
mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o
mtd: spi-nor: enable 4B opcodes for mx66l51235l
...
|
|
|
Dave Airlie
|
af5ecb53c8 |
drm/imx: various cleanups
- Switch to drm_*_get/put() helpers - Use correct parallel-display connector enum: DPI instead of VGA - Remove incorrect unit name from device tree binding documentation example - Remove an unused variable -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlnnhI0XHHAuemFiZWxA cGVuZ3V0cm9uaXguZGUACgkQUMKIHHCeYOv1jg/+MuctN8+p4gV82HIuiOPUjSjd KFppcnRkrw16t7phX1QzbZnWLuR5mtq8/cLJa5QcRDuHOUeArSaUX2c9q+Fb6Wl5 +qWwDnEIdtXA3VJ0OI7hKQBjed0vqs95gJU/EZQ8pxo6ppZdLO6r92esS0Rx5lBO Rks9QvxgzDdoCRsuG2i6sCAnszA8Gyll8iSVKcD6o/+01Sy10T2IpxQmfZ0oZf4f NITPEWspMsZxlnkZV1FczpWW6CLvvIenYnCE8uoWRRUTrDb6lw2HI8IOcLD8YTw/ Y0hLakje9YFgchQCoufky+W8W5cdfqx5JDklQvPQqm8uZK9Nc46Qlcl4pueTJGQn Y7YTrvcZndNKrdi/Pgv1q0MPrNZWWGewPMcK478oUoUoHcETmoOVgjOWoacG3J01 8Wgak3C8yAGcQZyLK79xqiSL+drP0rcc5+C2jraknvvVTuxqoXPdYxmcNd/Nia9K rHL+JpL5HTyXl4WSL+AEOdycfett+bqknlpi7wCmiYCHz6GgZMzPKaxhDQFSWctb 9O1N1P5/MYBF4Ms4jr2vpb3kSHdaiGlTLW3v3r4rZrnAuzyQGlzW5keoqKCEMOhG DA6/pxZJbtpdrr+ESniygyrAgR/sUbV8ANaDYj043/1LuVkXzxg2RFPXCINlndgF meVkzK+H3I9lZRVPIy4= =3q2o -----END PGP SIGNATURE----- Merge tag 'imx-drm-next-2017-10-18' of git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: various cleanups - Switch to drm_*_get/put() helpers - Use correct parallel-display connector enum: DPI instead of VGA - Remove incorrect unit name from device tree binding documentation example - Remove an unused variable * tag 'imx-drm-next-2017-10-18' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: ipu-dc: Remove unused 'di' variable dt-bindings: fsl-imx-drm: Remove incorrect "@di0" usage drm/imx: parallel-display: use correct connector enum drm/imx: switch to drm_*_get(), drm_*_put() helpers |
|
|
Kees Cook
|
7eeb6b893b |
timer: Remove init_timer() interface
All users of init_timer() have been updated. Remove the ancient interface. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
Dave Hansen
|
c51ff2c7fc |
x86/pkeys: Update documentation about availability
Now that CPUs that implement Memory Protection Keys are publicly available we can be a bit less oblique about where it is available. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171111001228.DC748A10@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Linus Torvalds
|
e1d1ea549b |
fbdev changes for v4.15:
- convert timers to use timer_setup() (Kees Cook, Thierry Reding)
- fix panels support on iMX boards in mxsfb driver (Stefan Agner)
- fix timeout on EDID read in udlfb driver (Ladislav Michl)
- add missing modes to fix out of bounds access in controlfb driver
(Geert Uytterhoeven)
- update initialisation paths in sa1100fb driver to be more robust
(Russell King)
- fix error handling path of ->probe method in au1200fb driver
(Christophe JAILLET)
- fix handling of cases when either panel or crt is defined in sm501fb
driver (Sudip Mukherjee, Colin Ian King)
- add ability to the Goldfish FB driver to be recognized by OS via DT
(Aleksandar Markovic)
- structures constifications (Bhumika Goyal)
- misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)
- misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)
- remove dead igafb driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=afFm
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.15' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here (though removal of the dead igafb
driver stands out in diffstat).
Summary:
- convert timers to use timer_setup() (Kees Cook, Thierry Reding)
- fix panels support on iMX boards in mxsfb driver (Stefan Agner)
- fix timeout on EDID read in udlfb driver (Ladislav Michl)
- add missing modes to fix out of bounds access in controlfb driver
(Geert Uytterhoeven)
- update initialisation paths in sa1100fb driver to be more robust
(Russell King)
- fix error handling path of ->probe method in au1200fb driver
(Christophe JAILLET)
- fix handling of cases when either panel or crt is defined in
sm501fb driver (Sudip Mukherjee, Colin Ian King)
- add ability to the Goldfish FB driver to be recognized by OS via DT
(Aleksandar Markovic)
- structures constifications (Bhumika Goyal)
- misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)
- misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)
- remove dead igafb driver"
* tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits)
OMAPFB: prevent buffer underflow in omapfb_parse_vram_param()
video: fbdev: sm501fb: fix potential null pointer dereference on fbi
fbcon: Initialize ops->info early
video: fbdev: Convert timers to use timer_setup()
video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
fbdev: controlfb: Add missing modes to fix out of bounds access
video: fbdev: sis_main: mark expected switch fall-throughs
video: fbdev: cirrusfb: mark expected switch fall-throughs
video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
video: fbdev: intelfb: remove redundant variables
video/fbdev/dnfb: Use common error handling code in dnfb_probe()
sm501fb: suspend and resume fb if it exists
sm501fb: unregister framebuffer only if registered
sm501fb: deallocate colormap only if allocated
video: goldfishfb: Add support for device tree bindings
Documentation: Add device tree binding for Goldfish FB driver
video: udlfb: Fix read EDID timeout
video: fbdev: remove dead igafb driver
video: fbdev: mxsfb: fix pixelclock polarity
...
|
|
|
Linus Torvalds
|
c633e898bd |
DeviceTree fixes for 4.15:
- Remove mc13892 as a trivial device - Improve of_find_node_by_name() documentation - Fix unit test dtc warnings - Clean-ups of USB binding documentation - Fix potential NULL deref in of_pci_map_rid -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJaEx6REBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOnnRAA kP/o4X2Zo2VCZMHkLunDIwXXmNAn+Eh6WzbzWROn/J8A3sBH2jMJWzQrfBQqdUTC KXtJkDxmIFqtaUI6aD5ZekLZ/dE/iDAwzYtHMwmcw73g2An1+mxeLnv7GGTD3V9Y kiAeLqD3d1dS1ee+d/+g4t8Lj5W+8ClFyZk/CJ5oBRtWfyh/53vZsw/PuCSooXFY gFn/5YRctQyk5x/F/ELGRSuN54Lz9+wHG2pJc83+hRSbpvPJWiisXdGH/dhGO+V8 YhbSldtjfUZBNgFwdJJQISYw/6jA7iETwIy69cIHkJ674/dkyyw4IzgvjVocQN5e Q7egpeh/3YXNSSZe+gSqj6LjERrX8RIlHFhS28qgliA3UrtnPgw3RbhEaO2CSBHz /MoYK/ZjTwXYgDjjSP05WQ+MsnogiAYUhMx4GNcAq092BDOd9f0pzIiapLwrzje3 rWHixC4lMsU97X5jJhu+Er6d8AKl2mDoI2J3UCOsxlM0sIsTTk10qCpXwIes2TKk qMSCUZfwTO239w2DUG/TokXi8Q1v28TiKT1JE6yaQe6VDXHPRfxnGrJ57b4HZYPr 139jXxJ6Zs+qOpfKI8c11VpYHxxR4uSMIXECyCUEpdASNP5TmcRnMj9c3RtxsK3o CB4/Pjk5BA4svnzi2Aec/49ubkoSl0YKrmFyG7xDY+w= =pnqr -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Remove mc13892 as a trivial device - Improve of_find_node_by_name() documentation - Fix unit test dtc warnings - Clean-ups of USB binding documentation - Fix potential NULL deref in of_pci_map_rid * tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: trivial-devices: Remove fsl,mc13892 of: Document exactly what of_find_node_by_name() puts of: unittest: disable interrupts_property warning of: unittest: let dtc generate __local_fixups__ dt-bindings: usb: document hub and host-controller properties dt-bindings: usb: clean up compatible property dt-bindings: usb: fix reg-property port-number range dt-bindings: usb: fix example hub node name of/pci: Fix theoretical NULL dereference |
|
|
Fabio Estevam
|
87c9fd8182 |
dt-bindings: rtc: imxdi: Improve the bindings text
Improve the bindings text by doing the following changes: - Remove the i.MX53 reference, as the RTC on i.MX53 is a different hardware - Add 'clocks' to the list of required properties - Explain that the optional security violation irq is the second entry - Use the real unit address and irq numbers for i.MX25 Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
|
|
Jonathan Neuschäfer
|
def4db33e6 |
dt-bindings: trivial-devices: Remove fsl,mc13892
This device's bindings are not trivial: Additional properties are documented in in Documentation/devicetree/bindings/mfd/mc13xxx.txt. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Randy Dunlap
|
e7e61fc0ba |
Documentation: fix profile= options in kernel-parameters.txt
Correctly the formatting of several additions to the profile= option that have been added by using <profiletype> and listing the choices for it. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
|
|
Randy Dunlap
|
0cf9bb67f5 |
documentation/svga.txt: update outdated file
Drop CONFIG_VIDEO_400_HACK info completely. Drop CONFIG_VIDEO_RETAIN and CONFIG_VIDEO_LOCAL completely. Drop CONFIG_VIDEO_COMPACT and CONFIG_VIDEO_VESA info completely. Drop CONFIG_VIDEO_SVGA info since it has been removed. Drop chapter number & section number references since they are wrong. Drop (bad) ftp URL for 800x600 Thinkpad XF86Config. Rename CONFIG_VIDEO_GFX_HACK to VIDEO_GFX_HACK since it is not a Kconfig symbol. And to match the source code. Build options are controlled by the kernel kconfig utility. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-By: Martin Mares <mj@ucw.cz> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
|
|
SeongJae Park
|
80416fb43e |
kokr/memory-barriers.txt: Fix typo in paring example
This commit applies an upstream change, commit
|
|
|
SeongJae Park
|
578152da87 |
kokr/memory-barriers/txt: Replace uses of "transitive"
This commit applies two upstream change, commit |
|
|
Greg Kroah-Hartman
|
8ee25f6fcf |
Documentation/process: add Co-Developed-by: tag for patches with multiple authors
Sometimes a single patch is the result of multiple authors. As git only can have one "author" of a patch, it is still good to properly give credit to the other developers of a commit. To address this, document the "Co-Developed-by:" tag which can be used to show other authors of the patch. Note, these other authors must also provide a Signed-off-by: tag as it is their work that is being submitted here. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
|
|
Linus Torvalds
|
c8a0739b18 |
Support for the switchtec ntb and related changes. Also, a couple of
bug fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaEObnAAoJEG5mS6x6i9IjJD0P/jaJixjXVVPsA6pK31iykVad 7GIe0GHWDo/f9kHgR9sJQ27RvX/xLmr4IgQwZCWMT3YM2WPKk1i6eUwGycLRzgIq E4S3ehtqqryD/p1tvYXc8JXjaO2E99BjA9BtIT2TzXV8clUjl64K8D6XW0F2ilzM x1Ctmgf+c7z4In+gf/lazQOSIPE0qTAEVcQRwASg3GSQIuI6T3Iy40j3kCEys5IX MVdHTidUK92YUSyp7tCmAzj2Ffts60+b7gZhzv92eBtrZof8BZ/58UIJOR2CMcAp M4b/DxJLHGwvAajX+RyIHSJhXocMf2Wc1EuctVFOmBZt2lZuo4Y0ddVhggQKAOjc g26Lou4pPlZrAvcslzK1y2mzWpKRWB6HkUS9j8Tar1mj5oWyokCNSPYsZQhuUDJx nFIIbQsbVqkhZ5tAdBz/Fs4afkA0EWDLepXdBNT0Z4BnhFI/vWNDwsKksHV++T4W fg+H/xcKtqbzpxPdu75/rcXjnzhDtGvyFAp+2Z7CFTBK8Di/cB4y+FewGVfqa8wm GPN/cTEOP6siJawow5sviE4fEbWHGHxHvji07QsYHZa1BEH78cPi4svGmJLmpHgA UcCB3UqwudOOCALNbXz1nHlzwgBarXLeHZuHiRhOEaYRZUbLkJ9K56dn7RCxV1Ws /EntY8CCBNRAKl79y1kJ =svG8 -----END PGP SIGNATURE----- Merge tag 'ntb-4.15' of git://github.com/jonmason/ntb Pull ntb updates from Jon Mason: "Support for the switchtec ntb and related changes. Also, a couple of bug fixes" [ The timing isn't great. I had asked people to send me pull requests before my family vacation, and this code has not even been in linux-next as far as I can tell. But Logan Gunthorpe pleaded for its inclusion because the Switchtec driver has apparently been around for a while, just never in linux-next - Linus ] * tag 'ntb-4.15' of git://github.com/jonmason/ntb: ntb: intel: remove b2b memory window workaround for Skylake NTB NTB: make idt_89hpes_cfg const NTB: switchtec_ntb: Update switchtec documentation with notes for NTB NTB: switchtec_ntb: Add memory window support NTB: switchtec_ntb: Implement scratchpad registers NTB: switchtec_ntb: Implement doorbell registers NTB: switchtec_ntb: Add link management NTB: switchtec_ntb: Add skeleton NTB driver NTB: switchtec_ntb: Initialize hardware for doorbells and messages NTB: switchtec_ntb: Initialize hardware for memory windows NTB: switchtec_ntb: Introduce initial NTB driver NTB: Add check and comment for link up to mw_count() and mw_get_align() NTB: Ensure ntb_mw_get_align() is only called when the link is up NTB: switchtec: Add link event notifier callback NTB: switchtec: Add NTB hardware register definitions NTB: switchtec: Export class symbol for use in upper layer driver NTB: switchtec: Move structure definitions into a common header ntb: update maintainer list for Intel NTB driver |
|
|
Logan Gunthorpe
|
d0450244a4 |
NTB: switchtec_ntb: Update switchtec documentation with notes for NTB
The switchtec_ntb driver has a couple requirements on the switchec's hardware configuration so we add these notes to the documentation. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> |
|
|
Linus Torvalds
|
07c455ee22 |
platform-drivers-x86 for v4.15-1
For this cycle we have quite an update for the Dell SMBIOS driver including WMI work to provide an interface for SMBIOS tokens via sysfs and WMI support for 2017+ Dell laptop models. SMM dispatcher code is split into a separate driver followed by a new WMI dispatcher. The latter provides a character device interface to user space. The pull request contains a merge of immutable branch from Wolfram Sang in order to apply a dependent fix to the Intel CherryTrail Battery Management driver. Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0 support is added for Intel Skylake. Peaq WMI hotkeys driver gets its own maintainer and white list of supported models. Silead DMI is expanded to support few additional platforms. Tablet mode via GMMS ACPI method is added to support some ThinkPad tablets. Two commits appear here which were previously merged during the v4.14-rcX cycle: - |
|
|
Linus Torvalds
|
4f88bd23ba |
remoteproc updates for v4.15
This adds an interface for configuring Qualcomm's "secure SMMU" and adds support for booting the modem Hexagon on MSM8996. Two new debugfs entries are added in the remoteproc core to introspect the list of memory carveouts and the loaded resource table. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaD26iAAoJEAsfOT8Nma3FUp0QAL/WZhL8QsvVFbAlv/Aa6NKm z8blXscD0GKdQWDWGaGPtpbnpOWOYhJs9WxstiB2q9ooSa9brIdjG5ukr4DTgtRs 12If5tfkVFIjlBhAdYYK+biNSQtZE+37jb7aJ+j4N3Po3O72pxekcLMLhAdvY6yk zHnhDZ8N7KBxAa0eOg7PJz7AGRF6BHhPxkqgJm0FzBj4HLQ/lwrv6iYJRrZgw6CT OhIHgPwCSHmt2fTO2QDLOWJtbVMSFhunHbuYlzPwvhMAGCT87VmXCIkW8iVhcD24 uJMrFbQoBoWVMB68JgGUKd7SSs8pV7DMrGfJll1kBEQfMLynn8Omre7WDAfwjUEn ACasSDWdWEPABJoIRVkGhS+2BnfCehdvDC7QxFFPAf8oc49O3t6DyXcCQdcVkzzE f1r/G2JKsoNQxjklFJewU5r0EjWgvV/78Dmpi7tuUtjgMSyEqkYORmInbbFIqZrU 9bHCqrmlxuRFSklxoG2u7F2SVYgMVlqM4rmj8QqR85SeIfyZtcCx5i5yAj8dZsI1 JVjucOCROHFqs/3SYFKlo6x4XHIchJD4p64QOXPCVhw7R1NXTPRTFBCQ75PKdiD1 d7kcGhdaz2cMeN1WRhIQ00lh/uiDNd4Ez7sDuU8MnWiEcIs1/ZP1LCHZTNttoljH rWZp4XlrhT+Vx91zV5u5 =lnNj -----END PGP SIGNATURE----- Merge tag 'rproc-v4.15' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This adds an interface for configuring Qualcomm's "secure SMMU" and adds support for booting the modem Hexagon on MSM8996. Two new debugfs entries are added in the remoteproc core to introspect the list of memory carveouts and the loaded resource table" * tag 'rproc-v4.15' of git://github.com/andersson/remoteproc: remoteproc: qcom: Fix error handling paths in order to avoid memory leaks remoteproc: qcom: Drop pr_err in q6v5_xfer_mem_ownership() remoteproc: debug: add carveouts list dump feature remoteproc: debug: add resource table dump feature remoteproc: qcom: Add support for mss remoteproc on msm8996 remoteproc: qcom: Make secure world call for mem ownership switch remoteproc: qcom: refactor mss fw image loading sequence firmware: scm: Add new SCM call API for switching memory ownership |
|
|
Linus Torvalds
|
bedf571986 |
rpmsg updates for v4.15
This turn RPMSG_VIRTIO into a user selectable config, fixes a few bugs in GLINK and provides the support for specifying initial buffer sizes for GLINK channels. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaD2r+AAoJEAsfOT8Nma3F/tMP/24c6KyWfmkhRYXA5gJmEjnD PpzhfNonTYl225ZRutR6M4+gpOt6Ljtu8gvGzqXuPRNBf4CNCMqTRvQt0nF+jZnw QciY3dtDMKdCGC3hZoxCX6d1GjjtqvPL4SJW4zkcgYw4SnN5nISFw9iHpdDcX5bx RoCcCzq7rPRBRs4HNQ7wDSFTh9UAr5tAY5i4HwsAAoGejlhhioduDWoLp4dgGV5j Nc7wOU8KQZzPivN/i9ma8WdjZDzy9oSz0PRF6nbGnvFp/NOlxA3rj1DVIB7ONaV0 Ttod4Fs5Mj1GrsBKQ4rf2qVwjTIM2x721wJDBAzqJ6fRtHwCFim2THMZPx0s7pa9 SqX+ZUmV9WD8TBz+mQcLYG3mHqZIlpE4f+uAc8XWruISyij7j9QVoqzZxtGRI1H/ SFu21ovlZieuBRS3g8soxkjFmHzlvvyzrv8p/+t4KqAtb1csTVPAxEsT8PddHzPR +c8mUKgFlcJnmi4ILg3rIo7Z3BLfz7C7jIZpRBXEe2Z2JA1aHbUrUWDpw/QhHoEy rlASk0f4h4uhAYlsxJDYx+Wg5b3DV0H/ouy5qzDdxlB78Gvw+6/2RUPSeummu2Mt 5rKg0anw1GtAGYlXx14HVX427HY3y6mrmNERlfPnwkwfQfTbYVQ6vMp1op+8XF0H KbxkyufQlZnimLJjwD6W =jirb -----END PGP SIGNATURE----- Merge tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: - turn RPMSG_VIRTIO into a user selectable config - fix few bugs in GLINK - provide the support for specifying initial buffer sizes for GLINK channels. * tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc: rpmsg: glink: The mbox client knows_txdone rpmsg: glink: Add missing MODULE_LICENSE rpmsg: glink: Use best fit intent during tx rpmsg: glink: Add support to preallocate intents dt-bindings: soc: qcom: Support GLINK intents rpmsg: glink: Initialize the "intent_req_comp" completion variable rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfig |
|
|
Linus Torvalds
|
fc35c1966e |
We have two changes to the core framework this time around. The first being a
large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Core: - Runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - Runtime PM support for Samsung exynos5433/exynos4412 providers - Removal of clkdev aliases on Samsung SoCs - Convert clk-gpio to use gpio descriptors - Various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - Sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - Support for the second display unit clock on Renesas RZ/G1E - Suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - New clock ids for Rockchip rk3188 and rk3368 SoCs - Various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJaD3qRAAoJEK0CiJfG5JUlOLgQAKWekgG/IYgcPzPWDYfg8Hwr sVVUK7+q7TVfbHsbYVikJuUaxutKZ0onnrYmOalTTyyxqL2E1/rYScnxdYHfcwX8 cyfHebRHsbh/Xg45ktwjzBkO49nwuppkpXd/V80GSBUZ+lsIVl5DUrrFAZdRUEdr CEsAsF9tEWIl+0gqXYNuiKBV7QAYv5BUPrbJQf0PwL6jX0OAhLv+ukfN8BdmYsOb rdoqhdgmyHkTuIMqsC/H2yP59aAKBse7wxIYebDiTdbPWfTkC9q927fTs4A02F6L sHfLvCpfuB4rOjXy6LSd1gMGWIcjotZai+idHBqtNLLVz6exF1QpUCp+pZjEULbA /Sx9lk8A3cYoa8pTu1NrrZbZX17iHkFswqMF3T20nhUN9+Ti597ZEbRcWDcoEZtw v2NznOTJ7Mm2SrNHOvDklstggNIGcwiAEePGMo7rJNEQZChpDjQj/gJWKzn0UwL4 zfk+0EzoejPdvZ5FJUfmlr8Tqk53uw+y7/0xQ6gf8lDviTrzzoeXtJUyumGBiuGx RxFywf8n02oLYRJm5hu+0NkC+/bX0Lxg/kwiR6FLBFbBFgkWyp7FGcxhlm6ZiBfe 0KkPciWslNavn5KhljIkZDbXymbvhhSr9uBEFsyeJueA5q7sSghWloL8Ag1cac3W e6swD1ngXtM/t5gjOLhR =hC7z -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ... |
|
|
Bjørn Forsman
|
16f8259ca7 |
kbuild: /bin/pwd -> pwd
Most places use pwd and rely on $PATH lookup. Moving the remaining
absolute path /bin/pwd users over for consistency.
Also, a reason for doing /bin/pwd -> pwd instead of the other way around
is because I believe build systems should make little assumptions on
host filesystem layout. Case in point, we do this kind of patching
already in NixOS.
Ref. commit
|
|
|
Linus Torvalds
|
2ce079f04d |
Kbuild misc updates for v4.15
- Clean up and fix RPM package build
- Fix a warning in DEB package build
- Improve coccicheck script
- Improve some semantic patches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7aYW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild misc updates from Masahiro Yamada:
- Clean up and fix RPM package build
- Fix a warning in DEB package build
- Improve coccicheck script
- Improve some semantic patches
* tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
docs: dev-tools: coccinelle: delete out of date wiki reference
coccinelle: orplus: reorganize to improve performance
coccinelle: use exists to improve efficiency
builddeb: Pass the kernel:debarch substvar to dpkg-genchanges
Coccinelle: use false positive annotation
coccinelle: fix verbose message about .cocci file being run
coccinelle: grep Options and Requires fields more precisely
Coccinelle: make DEBUG_FILE option more useful
coccinelle: api: detect identical chip data arrays
coccinelle: Improve setup_timer.cocci matching
Coccinelle: setup_timer: improve messages from setup_timer
kbuild: rpm-pkg: do not force -jN in submake
kbuild: rpm-pkg: keep spec file until make mrproper
kbuild: rpm-pkg: fix jobserver unavailable warning
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot}
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled
kbuild: rpm-pkg: refactor mkspec with here doc
kbuild: rpm-pkg: clean up mkspec
kbuild: rpm-pkg: install vmlinux.bz2 unconditionally
kbuild: rpm-pkg: remove ppc64 specific image handling
|
|
|
Linus Torvalds
|
fa7f578076 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ... |
|
|
Victor Chibotaru
|
c512ac01d8 |
kcov: update documentation
The updated documentation describes new KCOV mode for collecting comparison operands. Link: http://lkml.kernel.org/r/20171011095459.70721-3-glider@google.com Signed-off-by: Victor Chibotaru <tchibo@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: <syzkaller@googlegroups.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Kangmin Park
|
2743232c0c |
Documentation/sysctl/vm.txt: fix typo
Link: http://lkml.kernel.org/r/CAKW4uUyCi=PnKf3epgFVz8z=1tMtHSOHNm+fdNxrNw3-THvRCA@mail.gmail.com Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |