virtio_ring currently sends the device (usually a hypervisor)
physical addresses of its I/O buffers. This is okay when DMA
addresses and physical addresses are the same thing, but this isn't
always the case. For example, this never works on Xen guests, and
it is likely to fail if a physical "virtio" device ever ends up
behind an IOMMU or swiotlb.
The immediate use case for me is to enable virtio on Xen guests.
For that to work, we need vring to support DMA address translation
as well as a corresponding change to virtio_pci or to another
driver.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-input is basically evdev-events-over-virtio, so this driver isn't
much more than reading configuration from config space and forwarding
incoming events to the linux input layer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for testing device virtio 1 compatibility.
Based on patch by Rusty - couldn't resist putting
that flying car joke in there!
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The ABI *is* stable, and has been for a while now.
Drop Kconfig warning saying that it's not guaranteed
to work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Always mark pages with PageBalloon even if balloon compaction is disabled
and expose this mark in /proc/kpageflags as KPF_BALLOON.
Also this patch adds three counters into /proc/vmstat: "balloon_inflate",
"balloon_deflate" and "balloon_migrate". They accumulate balloon
activity. Current size of balloon is (balloon_inflate - balloon_deflate)
pages.
All generic balloon code now gathered under option CONFIG_MEMORY_BALLOON.
It should be selected by ballooning driver which wants use this feature.
Currently virtio-balloon is the only user.
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Everyone who selects VIRTIO is also made to select VIRTIO_RING; just make
them synonymous, since we removed the indirection layer some time ago.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Trying to enable a virtio driver (eg CONFIG_VIRTIO_BLK) is painful
because it depends on CONFIG_VIRTIO. CONFIG_VIRTIO doesn't tell you
how to turn it on (it's selected from anything which provides a virtio
bus).
This patch at least adds some documentation, visible in menuconfig, as
a hint.
Reported-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It is not experimental in any vaguely-sane sense.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Devices should depend on virtio, not select it. It's supposed to be
selected by the particular driver, e.g. VIRTIO_PCI.
Make balloon depend on VIRTIO and EXPERIMENTAL
(to match description).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch adds an option to instantiate guest virtio-mmio devices
basing on a kernel command line (or module) parameter, for example:
virtio_mmio.devices=0x100@0x100b0000:48
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fix this compile error on s390:
CC [M] drivers/virtio/virtio_mmio.o
drivers/virtio/virtio_mmio.c: In function 'vm_get_features':
drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel'
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch, based on virtio PCI driver, adds support for memory
mapped (platform) virtio device. This should allow environments
like qemu to use virtio-based block & network devices even on
platforms without PCI support.
One can define and register a platform device which resources
will describe memory mapped control registers and "mailbox"
interrupt. Such device can be also instantiated using the Device
Tree node with compatible property equal "virtio,mmio".
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Michael S.Tsirkin <mst@redhat.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.
Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.
Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.
The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.
This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.
Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After discussions with Anthony Liguori, it seems that the virtio
balloon can be made even simpler. Here's my attempt.
The device configuration tells the driver how much memory it should
take from the guest (ie. balloon size). The guest feeds the page
numbers it has taken via one virtqueue.
A second virtqueue feeds the page numbers the driver wants back: if
the device has the VIRTIO_BALLOON_F_MUST_TELL_HOST bit, then this
queue is compulsory, otherwise it's advisory (and the guest can simply
fault the pages back in).
This driver can be enhanced later to deflate the balloon via a
shrinker, oom callback or we could even go for a complete set of
in-guest regulators.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a PCI device that implements a transport for virtio. It allows virtio
devices to be used by QEMU based VMMs like KVM or Xen.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is needed for the virtio PCI device to be compiled as a module.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These helper routines supply most of the virtqueue_ops for hypervisors
which want to use a ring for virtio. Unlike the previous lguest
implementation:
1) The rings are variable sized (2^n-1 elements).
2) They have an unfortunate limit of 65535 bytes per sg element.
3) The page numbers are always 64 bit (PAE anyone?)
4) They no longer place used[] on a separate page, just a separate
cacheline.
5) We do a modulo on a variable. We could be tricky if we cared.
6) Interrupts and notifies are suppressed using flags within the rings.
Users need only get the ring pages and provide a notify hook (KVM
wants the guest to allocate the rings, lguest does it sanely).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms. It will no-doubt need further enhancement.
The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.
There is also a generic implementation of config space which drivers can query
to get setup information from the host.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Andy Lutomirski