There's bunch of macros in mlme_s.h that aren't used for anything. Kill them
off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The scan_s.h header is not actually used for anything so just kill it off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes remaining typedef declarations from the w35und driver. Most
of them were unused so I just killed them off completely.
Cc: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixes an uninitialized variable access in _rx_iq_calibration_loop_winbond():
CC [M] drivers/staging/winbond/phy_calibration.o
drivers/staging/winbond/phy_calibration.c: In function ‘_rx_iq_calibration_loop_winbond’:
drivers/staging/winbond/phy_calibration.c:1138: warning: ‘val’ is used uninitialized in this function
Cc: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also remove no unused precision attr.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This has been replaced by a separate _index attribute
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also fixes a missing NULL to terminate one of the attribute arrays.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As Manuel Stahl observed, putting data into the naming of an attribute
(beyond what it is for) breaks the one value per attribute rule (in spirit
at least). Hence we introduce a separate _index attribute for each scan
element to tell userspace the ordering in output from the buffer.
This will generate a lot of sparse warnings as all drivers will have unused
iio_const_attrs created. The rest of the set will clean these up.
The final patch will remove the old indexing method. It is not here so
as to maintain one or other interface for all devices as this set
progresses.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The job this was intended to do (never implemented) is now done
by explicit definition of _type attributes in all drivers
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The bit depth of 14 for the supply adc on the datasheet is highly
suspicious. Confirmation requested from Analog.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Note some of the in driver type specifications do not match the
data sheet. I am assuming the datasheet is correct. This bug
would not have been apparent in the driver as these values were
unusued.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As both signed and unsigned in attributes exist, each element must
be fully specified.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also, adds a macro to make defining such attributes simple.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch to the existing bcm80211 directory in the staging tree adds fullmac
driver support for the BCM4329 SDIO chip from Broadcom. Configuration of the
mac80211 driver or the fullmac driver can be done through menuconfig.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
move all the header information to ti_wilink_st.h.
This header would then not only serve the local modules like the st_core.c,
st_kim.c and st_ll.c but also the external modules/protocol drivers that are
dependent on the shared transport driver.
Modify the source files to include the new header ti_wilink_st.h,
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
replace uint and family by a much more proper u8/u16 types.
This is required specifically for data members of structures coming
in from the chip and data members parsed from the binary firmware file.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The commit fixes a race condition in the initialization portion of the
driver. The problem was observed while testing with the kernel in the
staging-next tree. The wait on the ready event is signalled prematurely
before setting the arVersion.wlan_ver and arVersion.abi_ver. The code
waiting on this semaphore checks for the validity of these values and
hence may proceed with an un-updated values of these fields. The wakeup
signal is now sent after these values are set.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The commit fixes a compilation error that was encountered while using
a specific kernel configuration file. The problem was the use of some
functions defined in <linux/semaphore.h> without including the header
file explicitly. It was probably working before because of the
dependency getting implicitly satisfied via some other header file.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminating the inclusion of the same header file more than once.
The files being removed are already included by osapi_linux.h.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the adl_pci9111.c file that fixes all, printk() should
include KERN-facility level, warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
set_primary_if is currently misused to update the mac address in vis
packets. This unneeded and introduces overhead due to other operations
which must be done when updating the primary interface.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
set_primary_if exchanges the current primary interfaces with a new one.
This is a new reference and thus we have to count it and decrease the
count of the old primary interface.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The return of get_batman_if_by_netdev and get_active_batman_if leaks a
pointer from the rcu protected list of interfaces. We must protect it to
prevent a too early release of the memory. Those functions must increase
the reference counter before rcu_read_unlock or it may be to late to
prevent a free.
hardif_add_interface must also increase the reference count for the
returned batman_if to make the behaviour consistent.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
get_batman_if_by_netdev and get_active_batman_if may leak data from the
rcu protected list of interfaces. The rcu protected list of all gateway
nodes leaks the actual data outside the read-side critical area. This is
not valid as we may free the data using a call_rcu created callback
after we unlock using rcu_read_unlock. A workaround is to provide a
reference count to be sure that the memory isn't freed to early.
It is currently only to implement the already existing functionality and
doesn't provide the full tracking of all usage cases.
Additionally, we must hardif_hold inside the
rcu_read_lock()..rcu_read_unlock() before we attach to the structure
which "leaks" it. When another function now removed it from its usage
context (primary_if, usage on stack, ...) then we must hardif_put it. If
it is decremented to zero then we can issue the call_rcu to the freeing
function. So "put" is not allowed inside an rcu_read_lock.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is recommended [1] to use synchronize_rcu to simplify the code -
especially when otherwise extra locking is needed to protect other code
from picking stale elements. It also protects us for emitting to many
callbacks which may results in OOM conditions.
The only reason not to use it, would be in performance critical sections
or when we are not allowed to block.
[1] Documentation/RCU/checklist.txt
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Regions which do not use rcu functions don't need to protected by
rcu_read_lock. If we want to protect data from being freed than it must
be covered by the same read-side critical section or otherwise the grace
period may already ended and freed the memory before we called
rcu_read_lock again.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
receive_bat_packet is not called with rcu_read_lock so we must ensure by
ourself that we protect list_for_each_entry_rcu using the correct RCU
locks.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The update critical sections of if_list must be protected by a locking
primitive other than RCU. The iterator must also be protected by the
chosen locking mechanism.
The rtnl_lock in hardif_remove_interfaces must also be moved outside the
iterator primitive to ensure that we don't deadlock the kernel due to
differently nested locks in hardif_remove_interfaces and hard_if_event.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
synchronize_rcu respective synchronize_net only waits for the rcu grace
period to elapse and we may fail to finish the calls which were made to
call_rcu in that time. In result the module could be unloaded during the
execution of the RCU callbacks.
rcu_barrier[1] will now wait for all outstanding RCU callbacks to finish
before continuing.
[1] Documentation/RCU/rcubarrier.txt
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't allow to seek in the debugfs socket and log files. Thus we
should mark the file descriptor as nonseekable.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The official mailing list is run on lists.open-mesh.org and it should be
avoided to sent them to lists.open-mesh.net to reduce the number of
receipents and double posts.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
checkpatch now detects the start of a comment and warns about usage of
multiple spaces at the beginning of a line. We have to replace the ' '
in multiple lines comments by ' * ' to fix it.
Checkpatch also wants a comment after a definition of a spinlock_t which
describes what it protects. It is currently not possible to add it
before the actual struct which includes the spinlock.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Platform devices tend to have id as -1 when only 1 device exist and
a value >=0 when multiple devices exist, since we plan to store all
these platform devices if multiple exist, there was a requirement to
have id to be >=0.
The patch fixes this problem.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keucr lost the disconnect,
so keucr crash when plug-in and then plug-out SD-card quickly.
unmark the part of usb disconnect
Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed the last 5 lines, indented with spaces, replacing spaces with tabs.
Signed-off-by: Clelia V. Korol <cvkorol@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I remove parenthesis for a return variable, and also delete a space and tab the code line
Signed-off-by: matias <munozmatiasn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added an space after the definition of the variable MSG_LEVEL_INFO on line 43
Signed-off-by: Emanuel Mariano Ravera <ravera.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed not required parentheses in return statements.
Signed-off-by: Diego H. Iglesias <diegohi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ai_count and ao_counter are unsigned, check for < 0 doesn't make sense.
Cast them to int.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
chd_dec_major is unsigned, so check chd_dec_major < 0 doesn't make sense.
Since it is used as signed, declare it as int.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
video_nr is unsigned, so check video_nr >= 0 doesn't make sense.
The only "negative" value may be -1, so explicitly check for it.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Handle build case of CONFIG_PM not being enabled.
drivers/staging/bcm/InterfaceInit.c:280: error: 'struct usb_device' has no member named 'autosuspend_delay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix lots of printk format warnings in bcm. Here is a sample of them:
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keucr driver has a build error when CONFIG_PM is not enabled, so fix that.
drivers/staging/keucr/usb.c:42: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:43: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:64: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:65: error: 'struct us_data' has no member named 'suspend_resume_hook'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update keucr TODO with additional work items.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are many locations where MAC or BSSID is printed. The plain format
is used in such places. *printf() in kernel recognizes
%pM, %pMF and %pm format parameters to print out 6-byte array as MAC
address. This patch changes plain format to custom %pM which is widely
used in kernel.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch includes changing some defines, necessary for compilation
with the linux-next tree.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch remove file system specific (fat_get_block) and vfs calls
from the cyasgadget driver. The current implementation expects user
space to write the file (open, seek to end, 1 byte write), followed by a
call to clear the dirty pages from the the page cache.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch contains an update for cyasblkdev_queue.c which is needed for
the kernel update from 2.6.35 to 2.6.36.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the currently broken Kconfig for west bridge by
introducing a dependency on a valid HAL Layer for the driver build.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch that fixes up, macros with multiple statements should be enclosed in a do - while loop, coding style issue in the adl_pci9111.c file found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kmalloc() may fail, if so drop current packet.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Removed new introduced deadlock]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Paul E. McKenney informed us that rcu is misused by leaking pointers to
rcu related elements outside read-side protected critical sections.
He also recommended that it should be checked against the rcu checklist.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gw_list_lock, gw_list and curr_gw are currently unused members of struct
bat_priv. They will be readded when gateway support is really
implemented.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
During the module shutdown procedure in batman_exit(), a rcu callback is
being scheduled (batman_exit -> hardif_remove_interfaces ->
hardif_remove_interfae -> call_rcu). However, when the kernel unloads
the module, the rcu callback might not have been executed yet, resulting
in a "unable to handle kernel paging request" in __rcu_process_callback
afterwards, causing the kernel to freeze.
The synchronize_net and synchronize_rcu in mesh_free are currently
called before the call_rcu in hardif_remove_interface and have no real
effect on it.
Therefore, we should always flush all rcu callback functions scheduled
during the shutdown procedure using synchronize_net. The call to
synchronize_rcu can be omitted because synchronize_net already calls it.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg