This eliminates the following sparse warning:
drivers/gpu/drm/bridge/adv7511/adv7511_audio.c:58:5: warning: symbol
'adv7511_hdmi_hw_params' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033826.142923-1-yanaijie@huawei.com
This eliminates the following sparse warning:
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c:527:5: warning: symbol
'analogix_dp_start_aux_transaction' was not declared. Should it be
static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033843.143240-1-yanaijie@huawei.com
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Replaced 'error' variable with 'ret']
[Renamed regulator from 'vcc' to 'power']
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922105526.5252-1-laurent.pinchart+renesas@ideasonboard.com
On some panels hooked up to the ti-sn65dsi86 bridge chip we found that
link training was failing. Specifically, we'd see:
ti_sn65dsi86 2-002d: [drm:ti_sn_bridge_enable] *ERROR* Link training failed, link is off (-5)
The panel was hooked up to a logic analyzer and it was found that, as
part of link training, the bridge chip was writing a 0x1 to DPCD
address 00600h and the panel responded NACK. As can be seen in header
files, the write of 0x1 to DPCD address 0x600h means we were trying to
write the value DP_SET_POWER_D0 to the register DP_SET_POWER. The
panel vendor says that a NACK in this case is not unexpected and means
"not ready, try again".
In testing, we found that this panel would respond with a NACK in
about 1/25 times. Adding the retry logic worked fine and the most
number of tries needed was 3. Just to be safe, we'll add 10 tries
here and we'll add a little blurb to the logs if we ever need more
than 5.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002135920.1.I2adbc90b2db127763e2444bd5a4e5bf30e1db8e5@changeid
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
7fM=
=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Inspired by a patch by Chris Wilson for vgem. Plus this gives us vmap
at the gem bo level, which we need for generic fbdev emulation.
Luckily shmem also tracks ->vaddr, so we just need to adjust the code
all over a bit to make this fit.
Also wire up handle_to_fd, dunno why that was missing.
v2:
- Drop now unused container_of #define (Melissa)
- Make sure we keep creating cached objects, this is for testing
(Thomas)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013111027.375999-1-daniel.vetter@ffwll.ch
The only thing we support is xrgb8888.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009232156.3916879-1-daniel.vetter@ffwll.ch
New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----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=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
Changing the caching on the fly never really worked
flawlessly.
So stop this completely and just let drivers specific the
desired caching in the tt or bus object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394256/
Instead of the placement flags use the caching of the bus
mapping or tt object for the page protection flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394255/
And implement setting it up correctly in the drivers.
This allows getting rid of the placement flags for this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394254/
All drivers can determine the tt caching state at creation time,
no need to do this on the fly during every validation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394253/
Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.
Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.
During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org
Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c5vA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVRACfWQRqsz/IIs6MZsDY9dkj4+QVUWAAn0mN2uHR
mBox8w4TdTfG96jFXSfF
=WYKP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
serial: mcf: add sysrq capability
serial: fsl_lpuart: add sysrq support when using dma
fbcon: remove no-op fbcon_set_origin()
tty/sysrq: Extend the sysrq_key_table to cover capital letters
serial: max310x: rework RX interrupt handling
serial: 8250_dw: Fix clk-notifier/port suspend deadlock
serial: 8250: Skip uninitialized TTY port baud rate update
serial: 8250: Discard RTS/DTS setting from clock update method
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
serial: 8250_fsl: Fix TX interrupt handling condition
serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
tty: serial: lpuart: fix lpuart32_write usage
serial: qcom_geni_serial: To correct QUP Version detection logic
serial: mvebu-uart: fix unused variable warning
vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
pch_uart: drop double zeroing
...
Now that we use kvmalloc for the crat_image, we need to use kvfree when
we destroy this.
Fixes: d0e63b343e ("drm/amdkfd: Use kvmalloc instead of kmalloc for VCRAT")
Reported-by: Morris Zhang <shiwu.zhang@amd.clm>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Synchronize the ring usage for vcn1 and jpeg1 to workaround a hardware bug.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
To avoid underflow seen on Polaris10 with some 3440x1440
144Hz displays. As the threshold of 190 us cuts too close
to minVBlankTime of 192 us.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
As warned when running "make htmldocs":
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf ("drm/amd/display: Add debugfs for forcing stream timing sync")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU reset might get called during init time, before
sw_init has been called.
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was recently introduced a change that enables driver to disable
streams if pixel clock changes. Consequently, the code path executed in
the disable vbios function expanded to an encoder verification part.
The encoder loop is nested inside the pipe count loop, and both loops
share the 'i' variable in control of their flow. This situation may lead
to an infinite loop because the encoder loop constantly updates the `i`
variable, making the first loop always positive. As a result, we can see
a soft hang during the module load (modprobe amdgpu) and a series of
dmesg log that looks like this:
kernel:[ 124.538727] watchdog: BUG: soft lockup - CPU#2 stuck for 22s!
[modprobe:1000]
RSP: 0018:ffffabbf419bf0e8 EFLAGS: 00000282
RAX: ffffffffc0809de0 RBX: ffff93b35ccc0000 RCX: ffff93b366c21800
RDX: 0000000000000000 RSI: 0000000000000141 RDI: ffff93b35ccc0000
RBP: ffffabbf419bf108 R08: ffffabbf419bf164 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: 0000000008677d40
R13: 0000000000000141 R14: ffff93b35cfc0000 R15: ffff93b35abc0000
FS: 00007f1400717540(0000) GS:ffff93b37f680000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005649b66b0968 CR3: 00000003e0fec000 CR4: 0000000000350ee0
Call Trace:
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x3a/0xb0 [amdgpu]
get_pixel_clk_frequency_100hz+0x30/0x50 [amdgpu]
dc_commit_state+0x8f1/0xae0 [amdgpu]
? drm_calc_timestamping_constants+0x101/0x160 [drm]
amdgpu_dm_atomic_commit_tail+0x39d/0x21a0 [amdgpu]
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
? kfree+0xc3/0x390
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
...
RSP: 002b:00007fff26009bd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055a8025bea50 RCX: 00007f140085c89d
RDX: 0000000000000000 RSI: 000055a8025b8290 RDI: 000000000000000c
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000c R11: 0000000000000246 R12: 000055a8025b8290
R13: 0000000000000000 R14: 000055a8025bead0 R15: 000055a8025bea50
This issue was fixed by introducing a second variable for the internal
loop.
Fixes: 8353d30e74 ("drm/amd/display: disable stream if pixel clock changed with link active")
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
There is import_uuid() function which imports u8 array to the uuid_t.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Reviewed-by: David Stevens <stevensd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201013132714.70973-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
i915 does not want to see value entries. Switch it to use
find_lock_page() instead, and remove the export of find_lock_entry().
Move find_lock_entry() and find_get_entry() to mm/internal.h to discourage
any future use.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In support of device-dax growing the ability to front physically
dis-contiguous ranges of memory, update devm_memremap_pages() to track
multiple ranges with a single reference counter and devm instance.
Convert all [devm_]memremap_pages() users to specify the number of ranges
they are mapping in their 'struct dev_pagemap' instance.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.co
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103789.4062302.18426128170217903785.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106116293.30709.13350662794915396198.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'struct resource' in 'struct dev_pagemap' is only used for holding
resource span information. The other fields, 'name', 'flags', 'desc',
'parent', 'sibling', and 'child' are all unused wasted space.
This is in preparation for introducing a multi-range extension of
devm_memremap_pages().
The bulk of this change is unwinding all the places internal to libnvdimm
that used 'struct resource' unnecessarily, and replacing instances of
'struct dev_pagemap'.res with 'struct dev_pagemap'.range.
P2PDMA had a minor usage of the resource flags field, but only to report
failures with "%pR". That is replaced with an open coded print of the
range.
[dan.carpenter@oracle.com: mm/hmm/test: use after free in dmirror_allocate_chunk()]
Link: https://lkml.kernel.org/r/20200926121402.GA7467@kadam
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen]
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103173.4062302.768998885691711532.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106115761.30709.13539840236873663620.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX4VPpAAKCRDj7w1vZxhR
xWX9AQCl1ePD7dbcLVMTcZYKVaQk55rFayqkscxuiSbCfbaNEgEAj03vDvkQdJ7O
dZrCcQTBnsvVJt6B2e82Pnax0rwWkgI=
=wqMd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-10-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
One fix for a bad revert in ingenic-drm, and one fix for panfrost to increase a timeout at power up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013065709.lwjw3fthoxwsbqsl@gilmour.lan
-----BEGIN PGP SIGNATURE-----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=bQuH
-----END PGP SIGNATURE-----
Merge tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
Fix a badly reverted commit. The revert commit was cherry-picked from
drm-misc-next to drm-misc-next-fixes, and in the process some unrelated
code was added.
Fixes: a3fb64c00d ("Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201012102509.10690-1-paul@crapouillou.net
When the number of potential color planes grew to 4 we stopped
setting all unused color plane offsets to ~0xfff. The code
still tries to do this, but actually does nothing since the
loop limits are bogus.
skl_check_main_surface() actually depends on this ~0xfff
behaviour as it will make sure to move the main surface
offset below the aux surface offset because the hardware
AUX_DIST must be a non-negative value [1], and for simplicity
it doesn't bother checking if the AUX plane is actually
needed or not. So currently it may end up shuffling the
main surface around based on some stale leftover AUX offset.
The skl+ plane code also just blindly calculates the AUX_DIST
whether or not the AUX plane is actually needed by the hw or
not, and that too will now potentially use some stale AUX
surface offset in the calculation. Would seem nicer to
guarantee a consistent non-negative AUX_DIST always.
So bring back the original ~0xfff offset behaviour for
unused color planes. Though it doesn't seem super likely
that this inconsistency would cause any real issues.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008101608.8652-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 79148ce4b2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The HDMI vs. not-HDMI check got inverted whem the bogus encoder->type
checks were eliminated. So now we're using 0 as the link rate on DP
and potentially non-zero on HDMI, which is exactly the opposite of
what we want. The original bogus check actually worked more correctly
by accident since if would always evaluate to true. Due to this we
now always use the RBR/HBR1 vswing table and never ever the HBR2+
vswing table. That is probably not a good way to get a high quality
signal at HBR2+ rates. Fix the check so we pick the right table.
Cc: stable@vger.kernel.org
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 94641eb6c6 ("drm/i915/display: Fix the encoder type check")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930223642.28565-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
(cherry picked from commit 945b18fb48)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Make all debug object descriptors constant. There is no reason to have
them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory waste.
-----BEGIN PGP SIGNATURE-----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=BP3+
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
"A small set of updates for debug objects:
- Make all debug object descriptors constant. There is no reason to
have them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory
waste"
* tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Free per CPU pool after CPU unplug
treewide: Make all debug_obj_descriptors const
debugobjects: Allow debug_obj_descr to be const
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----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=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
Kernel test robot reported build errors (undefined references)
that didn't make much sense. After reproducing them, there is also
a Kconfig warning that is the root cause of the build errors, so
fix that Kconfig problem.
Fixes this Kconfig warning:
WARNING: unmet direct dependencies detected for CMA
Depends on [n]: MMU [=n]
Selected by [m]:
- DRM_ASPEED_GFX [=m] && HAS_IOMEM [=y] && DRM [=m] && OF [=y] && (COMPILE_TEST [=y] || ARCH_ASPEED) && HAVE_DMA_CONTIGUOUS [=y]
and these dependent build errors:
(.text+0x10c8c): undefined reference to `start_isolate_page_range'
microblaze-linux-ld: (.text+0x10f14): undefined reference to `test_pages_isolated'
microblaze-linux-ld: (.text+0x10fd0): undefined reference to `undo_isolate_page_range'
Fixes: 76356a966e ("drm: aspeed: Clean up Kconfig options")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: linux-mm@kvack.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20201011230131.4922-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Fix CRTC state checker (Ville)
Propated from drm-intel-gt-next:
- Avoid implicit vmpa for highmem on 32b (Chris)
- Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris)
- Clear the buffer pool age before use. (Chris)
- Fix error code (Dan)
- Break up error capture compression loops (Chris)
- Fix uninitialized variable in context_create_request (Maarten)
- Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt)
- Serialize debugfs i915_gem_objects with ctx->mutex (Chris)
- Fix a rebase mistake caused during drm-intel-gt-next creation (Chris)
- Hold request reference for canceling an active context (Chris)
- Heartbeats fixes (Chris)
- Use usigned during batch copies (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl93cBoACgkQ+mJfZA7r
E8q8pQf+KvebXTbfD217OMONXqPt0+EC85hqA1LHmMq0E4W/qh2XjO242bdNq9oJ
qLd6YxKOXcWHxlDn1dlPTGOAbpDWeTT228QfC/vQMyvHnWX00J1EXoXnl14gHs7w
rYUdpdmC0qW5W5oJjdUU1P3EprahmOr0XNTOURS8fiylZBo8vTm4H3kB4iVsLSrT
zpUOthQ3PomnOUTeSQVDeYFgT5+S79qguUq9u27DBj+kKwrdx3IeAMHHEtXzg2JD
AmKgjRxH5PyZny9roCoKhm/aA3Zx32CXZI/zW84sKg9/ryh3SGHbIwJbTRaNX8ub
qheu87bWxm1v0a/7ZUr0Frb7tzXpAA==
=vULA
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Propagated from drm-intel-next-queued:
- Fix CRTC state checker (Ville)
Propated from drm-intel-gt-next:
- Avoid implicit vmpa for highmem on 32b (Chris)
- Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris)
- Clear the buffer pool age before use. (Chris)
- Fix error code (Dan)
- Break up error capture compression loops (Chris)
- Fix uninitialized variable in context_create_request (Maarten)
- Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt)
- Serialize debugfs i915_gem_objects with ctx->mutex (Chris)
- Fix a rebase mistake caused during drm-intel-gt-next creation (Chris)
- Hold request reference for canceling an active context (Chris)
- Heartbeats fixes (Chris)
- Use usigned during batch copies (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002182610.GA2204465@intel.com
We already have a private data member for maximum display width so
let's use it and get rid of the redundant tilcdc_crtc_max_width().
The LCDC version probing is moved to before reading the device tree
properties so that the version information is available when private
data maximum width is initialized, if "max-width" property is not
found.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73683d2ce151cffb811a756595b02892eeac3d84.1602349100.git.jsarha@ti.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX3bOIAAKCRDj7w1vZxhR
xVzcAPwNXvrMIukXSJsyHH/Vu00avUrwh/dgaNV2nMU3bqmWDAEAhNsdZPmdSva+
6rfry1bBUI4nTLgo7ac9PbCHyflw/QQ=
=zfJ7
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-10-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Three fixes for vc4 that addresses dual-display breakages
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002065243.ry7gp4or3ywhluer@gilmour.lan
Fix follow warning:
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: ''.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: CONFIG_ACPI...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: 'CONFIG_ACPI'.
......
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: CONFIG_X86...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: 'CONFIG_X86'.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: _X86_...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: '_X86_'.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: __linux__...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: '__linux__'.
Fixes: 97d798b276 ("drm/amdgpu: simplify ATIF backlight handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the virtual_display warning in drm_crtc_vblank_off when
dev->num_crtcs is null.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default auto setting for kcq should not generate
a warning.
Fixes: a300de40f6 ("drm/amdgpu: introduce a new parameter to configure how many KCQ we want(v5)")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to use the dev_* functions here rather than the pr_* variants.
Switch to using dev_warn() which mirrors what we do on other asics.
Fixes the following build errors on ARC:
../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should be programmed with timing rather than with odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1
[How]
Block switch in ACTIVE if not supported in BLANK
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amlogic SoC devices report the following errors frequently causing excessive
dmesg log spam and early log rotataion, although the errors appear to be
harmless as everything works fine:
[ 7.202702] panfrost ffe40000.gpu: error powering up gpu L2
[ 7.203760] panfrost ffe40000.gpu: error powering up gpu shader
ARM staff have advised increasing the timeout values to eliminate the errors
in most normal scenarios, and testing with several different G31/G52 devices
shows 20000 to be a reliable value.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008141738.13560-1-christianshewitt@gmail.com
DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603083132.4610-5-tzimmermann@suse.de
These settings are used by an ASPEED BMC to determine when the host is
trying to drive the display over PCIe (vga_pw) and to switch the
output between PCIe and the internal graphics device (dac_mux).
The valid values for the dac mux are:
00: VGA mode (default, aka PCIe)
01: Graphics CRT (aka BMC internal graphics, this driver)
10: Pass through mode from video input port A
11: Pass through mode from video input port B
Values for the read-only vga password register are:
1: Host driving the display
0: Host not driving the display
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916083413.777307-1-joel@jms.id.au
[Why & How]
change abm config init interface to support multiple ABMs.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If more than two jobs end up timeout-ing concurrently, only one of them
(the one attached to the scheduler acquiring the lock) is fully handled.
The other one remains in a dangling state where it's no longer part of
the scheduling queue, but still blocks something in scheduler, leading
to repetitive timeouts when new jobs are queued.
Let's make sure all bad jobs are properly handled by the thread
acquiring the lock.
v3:
- Add Steven's R-b
- Don't take the sched_lock when stopping the schedulers
v2:
- Fix the subject prefix
- Stop the scheduler before returning from panfrost_job_timedout()
- Call cancel_delayed_work_sync() after drm_sched_stop() to make sure
no timeout handlers are in flight when we reset the GPU (Steven Price)
- Make sure we release the reset lock before restarting the
schedulers (Steven Price)
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002122506.1374183-1-boris.brezillon@collabora.com
Hopefully we'll have the drm crash recorder RSN, but meanwhile
compositors would like to know a bit better why they get an EBUSY.
v2: Move misplaced hunk to the right patch (Pekka)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-2-daniel.vetter@ffwll.ch
When doing an atomic modeset with ALLOW_MODESET drivers are allowed to
pull in arbitrary other resources, including CRTCs (e.g. when
reconfiguring global resources).
But in nonblocking mode userspace has then no idea this happened,
which can lead to spurious EBUSY calls, both:
- when that other CRTC is currently busy doing a page_flip the
ALLOW_MODESET commit can fail with an EBUSY
- on the other CRTC a normal atomic flip can fail with EBUSY because
of the additional commit inserted by the kernel without userspace's
knowledge
For blocking commits this isn't a problem, because everyone else will
just block until all the CRTC are reconfigured. Only thing userspace
can notice is the dropped frames without any reason for why frames got
dropped.
Consensus is that we need new uapi to handle this properly, but no one
has any idea what exactly the new uapi should look like. Since this
has been shipping for years already compositors need to deal no matter
what, so as a first step just try to enforce this across drivers
better with some checks.
v2: Add comments and a WARN_ON to enforce this only when allowed - we
don't want to silently convert page flips into blocking plane updates
just because the driver is buggy.
v3: Fix inverted WARN_ON (Pekka).
v4: Drop the uapi changes, only add a WARN_ON for now to enforce some
rules for drivers.
v5: Make the WARNING more informative (Daniel)
v6: Add unconditional debug output for compositor hackers to figure
out what's going on when they get an EBUSY (Daniel)
v7: Fix up old/new_crtc_state confusion for real (Pekka/Ville)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
References: https://lists.freedesktop.org/archives/dri-devel/2018-July/182281.html
Bugzilla: https://gitlab.freedesktop.org/wayland/weston/issues/24#note_9568
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-1-daniel.vetter@ffwll.ch
We didn't take the kernel_fb_helper_lock mutex, which protects that
code. While at it, simplify the code
- inline the function (originally shared with kgdb I think)
- drop the error tracking and all the complications
- drop the pointless early out, it served nothing
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007133036.1541639-1-daniel.vetter@ffwll.ch
We want to use the dev_* functions here rather than the pr_* variants.
Switch to using dev_warn() which mirrors what we do on other asics.
Fixes the following build errors on ARC:
../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.
Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.
Fixes: c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 37054fc814 ("gpu/drm: ingenic: Add option to mmap
GEM buffers cached")
At the very moment this commit was created, the DMA API it relied on was
modified in the DMA tree, which caused the driver to break in
linux-next.
Revert it for now, and it will be resubmitted later to work with the new
DMA API.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201004141758.1013317-1-paul@crapouillou.net
This is not something drivers should use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393430/
That was missed during the cleanup.
v2: fix comment in vmwgfx as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394092/
It is the sole user of this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/393498/
We can always access the global state.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/393499/
Make it more clear what the resource manager function
does and nuke the wrapper function.
v2: nuke the wrapper
v3: fix typo in radeon, rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Link: https://patchwork.freedesktop.org/patch/393914/
Remove unused parameters, shorten the function name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393431/
Previously the code relied on device->pri to be NULL and to fail probing
later. We really should just return an error inside nvkm_device_ctor for
unsupported GPUs.
Fixes: 24d5ff40a7 ("drm/nouveau/device: rework mmio mapping code to get rid of second map")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: dann frazier <dann.frazier@canonical.com>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-1-kherbst@redhat.com
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The idea is to flip the core over to calling the driver always,
so add support for moves here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-6-airlied@gmail.com
Extend __sg_alloc_table_from_pages to support dynamic allocation of
SG table from pages. It should be used by drivers that can't supply
all the pages at one time.
This function returns the last populated SGE in the table. Users should
pass it as an argument to the function from the second call and forward.
As before, nents will be equal to the number of populated SGEs (chunks).
With this new extension, drivers can benefit the optimization of merging
contiguous pages without a need to allocate all pages in advance and
hold them in a large buffer.
E.g. with the Infiniband driver that allocates a single page for hold the
pages. For 1TB memory registration, the temporary buffer would consume only
4KB, instead of 2GB.
Link: https://lore.kernel.org/r/20201004154340.1080481-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
[Why]
Currently mode validation is bypassed if remote sink exists. That
leads to mode set issue when a BW bottle neck exists in the link path,
e.g., a DP-to-HDMI converter that only supports HDMI 1.4.
Any invalid mode passed to Linux user space will cause the modeset
failure due to limitation of Linux user space implementation.
[How]
Mode validation is skipped only if in edid override. For real remote
sink, clock limit check should be done for HDMI remote sink.
Have HDMI related remote sink going through mode validation to
elimiate modes which pixel clock exceeds BW limitation.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Formula uses kHz in their formula while our driver operates with Hz.
[How]
Divide audio rate by 1000 on the initial variable that is entered into formula.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes CRTCs can be disabled due to display unplugging or temporarily
transition in the userspace; in these circumstances, DCE tries to set
the minimum clock threshold. When we have this situation, the function
bw_calcs is invoked with number_of_displays set to zero, making DCE set
dispclk_khz and sclk_khz to zero. For these reasons, we have seen some
ATOM bios errors that look like:
[drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than
5secs aborting
[drm:amdgpu_atom_execute_table_locked [amdgpu]] *ERROR* atombios stuck
executing EA8A (len 761, WS 0, PS 0) @ 0xEABA
[How]
This error happens due to an attempt to optimize the bandwidth using the
sclk, and the dispclk clock set to zero. Technically we handle this in
the function dce112_set_clock, but we are not considering the case that
this value is set to zero. This commit fixes this issue by ensuring that
we never set a minimum value below the minimum clock threshold.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
align frag_end to the next pd when there are no
page table entries on the current pde.
This fixes invalidation of larger address space areas
where some page tables are allocated and other aren't.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.
Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.
Fixes: c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch restores DRM connector registration in the TC358764 bridge
driver and restores usage of the old drm_panel_* API, thus allows dynamic
panel registration. This fixes panel operation on Exynos5250-based
Arndale board.
This is equivalent to the revert of the following commits:
1644127f83 "drm/bridge: tc358764: add drm_panel_bridge support"
385ca38da2 "drm/bridge: tc358764: drop drm_connector_(un)register"
and removal of the calls to drm_panel_attach()/drm_panel_detach(), which
were no-ops and has been removed in meanwhile.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930114042.5806-1-m.szyprowski@samsung.com
The only usage of dw_hdmi_i2s_ops is to assign its address to the ops
field in the hdmi_codec_pdata struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201004200653.14702-1-rikard.falkeborn@gmail.com
clang static analysis reports this problem:
cdv_intel_dp.c:2101:2: warning: Attempt to free released memory
kfree(gma_connector);
^~~~~~~~~~~~~~~~~~~~
In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off()
fails, the handler calls cdv_intel_dp_destroy(connector) which does
the first free of gma_connector. So adjust the goto label and skip
the second free.
Fixes: d112a8163f ("gma500/cdv: Add eDP support")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201003193928.18869-1-trix@redhat.com
If we don't initialize the entity to idle and the entity is never
scheduled before being destroyed we end up with an infinite wait in the
destroy path.
v2:
- Add Steven's R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/393486/
drm_gem_fb_prepare_fb() extracts fence and attaches to plane state.
The fence info is needed if implicit fencing is used. Add this as
prepare_fb function pointer to plane helper funcs.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826134409.473554-1-tomi.valkeinen@ti.com
This reverts commit 37054fc814 ("gpu/drm: ingenic: Add option to mmap
GEM buffers cached")
At the very moment this commit was created, the DMA API it relied on was
modified in the DMA tree, which caused the driver to break in
linux-next.
Revert it for now, and it will be resubmitted later to work with the new
DMA API.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201004141758.1013317-1-paul@crapouillou.net
All slots in sysrq_key_table[] are either used, reserved or at least
commented with their intended use. This patch adds capital letter versions
available, which means adding 26 more entries.
For already existing SysRq operations the user presses Alt-SysRq-<key>, and
for the newly added ones Alt-Shift-SysRq-<key>.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20200818112825.6445-2-andrzej.p@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Crank up the warning a notch and point at the right set of locking
functions for atomic drivers.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002075620.4157591-1-daniel.vetter@ffwll.ch
When I refactored this code with the new init paths, I failed to
set the funcs back up properly, this caused a failure to bringup
gdm properly.
Fixes: 252f8d7b91 ("drm/vmwgfx/ttm: convert vram mm init to new code paths")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001042012.13114-1-airlied@gmail.com
We need to schedule the smu AC/DC interrupt ack to avoid
potentially sleeping if the smu message mutex is contended.
Fixes: e1188aacad ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can schedule work from interrupts. This might include
long tasks or things that could sleep.
Fixes: e1188aacad ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add mp0 11_0_11 for navy_flounder to the mem training
supported list, otherwise the modeprobe would fail
on navy_flounder with latest vbios.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support both direct and indirect accessor in unified
helper functions.
v2: Retire indirect mmio access via mm_index/data
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch WREG32/RREG32_PCIE to use indirect reg access
helper for soc15 and onwards
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function in order to remove RREG32/WREG32
in current pcie_rreg/wreg function for soc15 and
onwards adapters.
PCIE_INDEX/DATA pairs are used to access regsiters
outside of mmio bar in the helper functions.
The new helper functions help remove the recursion
of amdgpu_mm_rreg/wreg from pcie_rreg/wreg and
provide the oppotunity to centralize direct and
indirect access in a single function.
v2: Fixed typo and refine the comments
v3: Remove unnecessary volatile local variable
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On x64 we get:
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:751:10: warning: conversion from 'long unsigned int' to 'unsigned int' changes value from '18446744073709551613' to '4294967293' [-Woverflow]
The registers are 32 bit, so fix by casting to u32.
Fixes: fb43aa0acd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929091918.24813-1-tomi.valkeinen@ti.com
compute units that are in use.
[Why]
Allow user to know how many compute units (CU) are in use at any given
moment.
[How]
Surface files in Sysfs that allow user to determine the number of compute
units that are in use for a given process. One Sysfs file is used per
device.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
waves that are in flight.
[Why]
Allow user to know how many compute units (CU) are in use at any given
moment.
[How]
Read registers of SQ that give number of waves that are in flight
of various queues. Use this information to determine number of CU's
in use.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Be consistent and use unsigned long throughout the chunk copies to
avoid the inherent clumsiness of mixing integer types of different
widths and signs. Failing to take acount of a wider unsigned type when
using min_t can lead to treating it as a negative, only for it flip back
to a large unsigned value after passing a boundary check.
Fixes: ed13033f02 ("drm/i915/cmdparser: Only cache the dst vmap")
Testcase: igt/gen9_exec_parse/bb-large
Reported-by: "Candelaria, Jared" <jared.candelaria@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Candelaria, Jared" <jared.candelaria@intel.com>
Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928215942.31917-1-chris@chris-wilson.co.uk
(cherry picked from commit b7eeb2b413)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Verify that if a context is active at the time it is closed, that it is
either persistent and preemptible (with hangcheck running) or it shall
be removed from execution.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-close
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-3-chris@chris-wilson.co.uk
(cherry picked from commit d3bb2f9b5e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, we check we can send a pulse prior to disabling the
heartbeat to verify that we can change the heartbeat, but since we may
re-evaluate execution upon changing the heartbeat interval we need another
pulse afterwards to refresh execution.
v2: Tvrtko asked if we could reduce the double pulse to a single, which
opened up a discussion of how we should handle the pulse-error after
attempting to change the property, and the desire to serialise
adjustment of the property with its validating pulse, and unwind upon
failure.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-2-chris@chris-wilson.co.uk
(cherry picked from commit 3dd66a94de)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We only allow persistent requests to remain on the GPU past the closure
of their containing context (and process) so long as they are continuously
checked for hangs or allow other requests to preempt them, as we need to
ensure forward progress of the system. If we allow persistent contexts
to remain on the system after the the hangcheck mechanism is disabled,
the system may grind to a halt. On disabling the mechanism, we sent a
pulse along the engine to remove all executing contexts from the engine
which would check for hung contexts -- but we did not prevent those
contexts from being resubmitted if they survived the final hangcheck.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-stop
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-1-chris@chris-wilson.co.uk
(cherry picked from commit 7a991cd3e3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The reordering and rebasing of commit 2e4c6c1a9d ("drm/i915: Remove
i915_request.lock requirement for execution callbacks") caused it to
revert an earlier correction. Let us restore commit 99f0a640d464
("drm/i915: Remove requirement for holding i915_request.lock for
breadcrumbs")
Fixes: 2e4c6c1a9d ("drm/i915: Remove i915_request.lock requirement for execution callbacks")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925101107.27869-1-chris@chris-wilson.co.uk
(cherry picked from commit 35faeb7de9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since the debugfs may peek into the GEM contexts as the corresponding
client/fd is being closed, we may try and follow a dangling pointer.
However, the context closure itself is serialised with the ctx->mutex,
so if we hold that mutex as we inspect the state coupled in the context,
we know the pointers within the context are stable and will remain valid
as we inspect their tables.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723172119.17649-3-chris@chris-wilson.co.uk
(cherry picked from commit 102f5aa491)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case backoff fails with an error, we return an undefined rq,
assign err to rq correctly.
Fixes: 8a929c9eb1 ("drm/i915: Use ww pinning for intel_context_create_request()")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918111208.1392128-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 4316b19dee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As the error capture will compress user buffers as directed to by the
user, it can take an arbitrary amount of time and space. Break up the
compression loops with a call to cond_resched(), that will allow other
processes to schedule (avoiding the soft lockups) and also serve as a
warning should we try to make this loop atomic in the future.
Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk
(cherry picked from commit 293f43c80c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This code should use "vma[1]" instead of "vma". The "vma" variable is a
valid pointer.
Fixes: 6b05030496 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075243.GG12635@kadam
(cherry picked from commit 68ba71e3ae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we create a new node, it is possible for the slab allocator to return
us a recently freed node. If that node was just retired, it will retain
the current jiffy as its node->age. There is then a miniscule window,
where as that node is retired, it will appear on the free list with an
incorrect age and be eligible for reuse by one thread, and then by a
second thread as the correct node->age is written.
Fixes: 06b73c2d0b ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-3-chris@chris-wilson.co.uk
(cherry picked from commit 9bb34ff25c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's not try and use PAT attributes for I915_MAP_WC if the CPU doesn't
support PAT.
Fixes: 6056e50033 ("drm/i915/gem: Support discontiguous lmem object maps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-2-chris@chris-wilson.co.uk
(cherry picked from commit 121ba69ffd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide
virtual mappings of the high pages. As these are finite, map_new_virtual()
must wait for some other kmap() to finish when it runs out. If we map a
large number of objects, there is no method for it to tell us to release
the mappings, and we deadlock.
However, if we make an explicit vmap of the page, that uses a larger
vmalloc arena, and also has the ability to tell us to release unwanted
mappings. Most importantly, it will fail and propagate an error instead
of waiting forever.
Fixes: fb8621d3be ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32
References: e87666b52f ("drm/i915/shrinker: Hook up vmap allocation failure notifier")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-1-chris@chris-wilson.co.uk
(cherry picked from commit 060bb115c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same ECC check has been executed in amdgpu_ras_init for vega10,
prior to gmc_v9_0_late_init.
v2: drop all atombios helper callings
v3: use bit operation
v4: correct inline comment, remove parity check statement
v5: squash in build fix
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add code to gracefuly handle any pipe reassignment
occuring on dcn3 hardware. This should only happen when new
surfaces are used for an update rather than old ones updated.
Fixes: 69fc1f4b97 ("amd/drm/display: avoid dcn3 on flip opp change for slave pipes")
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxhub functions are now called from function pointers,
instead of from asic-specific functions.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow user to know number of compute units (CU) that are in use at any
given moment.
[How]
Read registers of SQ that give number of waves that are in flight
of various queues. Use this information to determine number of CU's
in use.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Header file exports functions get_gpu_clock_counter(), get_cu_info() and
select_se_sh() that are defined to be static
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>
Commit 78fe9f6394 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f6394 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VG20 DIDs 66a0, 66a1 and 66a4 are used for various SKUs that may or may
not have the FRU EEPROM on it. Parse the VBIOS to check for server SKU
variants (D131 or D134) until a more general solution can be determined.
v2: Remove string-based logic, correct the VBIOS string comment
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 78fe9f6394 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f6394 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add one sysfs file -- "pp_od_clk_voltage" for
Raven/Raven2/Picasso APU, which is only used by dGPU like VEGA10.
This sysfs file supports the feature to modify gfx engine clock(Mhz units), it can
be used to configure the min value and the max value for gfx clock limited in the
safe range.
Command guide:
echo "s level clock" > pp_od_clk_voltage
s - adjust teh sclk level
level - 0 or 1, "0" represents the min value, "1" represents the max value
clock - the clock value(Mhz units), like 400, 800 or 1200, the value must be within the
OD_RANGE limits.
Example:
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new trace event to track the PTE update
events. This specific event will provide information like:
- start and end of virtual memory mapping
- HW engine flags for the map
- physical address for mapping
This will be particularly useful for memory profiling tools
(like RMV) which are monitoring the page table update events.
V2: Added physical address lookup logic in trace point
V3: switch to use __dynamic_array
added nptes int the TPprint arguments list
added page size in the arg list
V4: Addressed Christian's review comments
add start/end instead of seg
use incr instead of page_sz to be accurate
V5: Addressed Christian's review comments:
add pid and vm context information in the event
V6: Re-sequence the variables (put pid and ctx_id first)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should be one copy-paste typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2740:6:
warning: symbol 'dce110_set_cursor_position' was not declared. Should it
be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2785:6:
warning: symbol 'dce110_set_cursor_attribute' was not declared. Should
it be static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:180:26:
warning: symbol 'get_color_space_type' was not declared. Should it be
static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At the moment on flip opp reassignment does not work in all cases
for non root pipes.
This change simply makes sure we prefer pipes not used previously
when splitting in dcn3.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Definition for retaining ABM settings during disable
- Addition of some new AUX interface definitions
- Addition of some outbox definitions
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
At the moment, some tests are failing because cur_link_settings is
invalid. As a workaround, add an option to force dio disable.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, when full p-state changes are not supported, DLG parameters
are calculated for no p-state support at all. However, we are required
to always support dummy p-state changes, so we should instead calculate
DLG based on dummy p-state latency when full p-state is unsupported.
This behaviour already exists for DCN2.
[How]
- move DLG calculation inside WM calculation
- if p-state unsupported, do not recalculate for set A, instead copy from
set C, and perform DLG calculation with dummy p-state latency
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some debug bits are not being copied from driver to fw.
[How]
Copy debug bits properly.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to use ttm_bo_init_reserved here to make sure
that the BO is pinned before it becomes visible on the LRU.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392561/?series=82199&rev=1
This patch updates dma_buf_vunmap() and dma-buf's vunmap callback to
use struct dma_buf_map. The interfaces used to receive a buffer address.
This address is now given in an instance of the structure.
Users of the functions are updated accordingly. This is only an interface
change. It is currently expected that dma-buf memory can be accessed with
system memory load/store operations.
v2:
* include dma-buf-heaps and i915 selftests (kernel test robot)
* initialize cma_obj before using it in drm_gem_cma_free_object()
(kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-4-tzimmermann@suse.de
This patch updates dma_buf_vmap() and dma-buf's vmap callback to use
struct dma_buf_map.
The interfaces used to return a buffer address. This address now gets
stored in an instance of the structure that is given as an additional
argument. The functions return an errno code on errors.
Users of the functions are updated accordingly. This is only an interface
change. It is currently expected that dma-buf memory can be accessed with
system memory load/store operations.
v3:
* update fastrpc driver (kernel test robot)
v2:
* always clear map parameter in dma_buf_vmap() (Daniel)
* include dma-buf-heaps and i915 selftests (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-3-tzimmermann@suse.de
The stride field has never been used, so repurpose it to be
"blob_mem". This way, userspace can know the memory properties
of the blob if it's passed between userspace processes and
no suitable userspace API exists to transmit that knowledge.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-17-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The old transfer ioctls may work on blob resources, and there is no
TRANSFER_BLOB hypercall now for simplicity.
The guest may have a image view on the blob resources such that the
stride is not equal to width * bytes_per_pixel.
For host-only blobs, we can repurpose the transfer ioctls to synchronize
caches as well. For guest-only blobs, these operations are undefined
for now so leave them out.
Also, with seamless Wayland integration between guest/host looking
increasingly attractive, it also makes sense to keep track of
one value for stride.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-16-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For upcoming blob resources, userspace can specify that the
resource will be used for cross-device sharing. This is mainly
for exportable blobs that will only shared with the virtgpu
display but not across devices.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-15-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SCANOUT_BLOB forwards the DRM framebuffer metadata to the host. The
modifier is intentionally left out -- it may be possible to query
the host for that.
We also assume one blob resource per DRM framebuffer. That too is
an intentional simplification.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-14-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A virtio-gpu vram object is based on range-based allocation.
No guest shmemfs backing, so we call drm_gem_private_object_init.
This is for host memory without any guest backing (atleast initially).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-12-gurchetansingh@chromium.org
Co-developed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
The availability of the host visible region means host 3D
allocations can be directly mapped in the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-9-gurchetansingh@chromium.org
Co-developed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
-----BEGIN PGP SIGNATURE-----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=NyM2
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.10
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914231227.30500-1-chunkuang.hu@kernel.org
* DSI support for sm8150/sm8250
* Support for per-process GPU pagetables (finally!) for a6xx.
There are still some iommu/arm-smmu changes required to
enable, without which it will fallback to the current single
pgtable state. The first part (ie. what doesn't depend on
drm side patches) is queued up for v5.10[1].
* DisplayPort support. Userspace DP compliance tool support
is already merged in IGT[2]
* The usual assortment of smaller fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
Previously intel_dump_pipe_config() used to dump the full crtc state
whether or not the crtc was logically enabled or not. As that meant
occasionally dumping confusing stale garbage I changed it to
check whether the crtc is logically enabled or not. However I did
not realize that the state checker readout code does not
populate crtc_state.hw.{active,enabled}. Hence the state checker
dump would only give us a full dump of the sw state but not the hw
state. Fix that by populating those bits of the hw state as well.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Fixes: 10d75f5428 ("drm/i915: Fix plane state dumps")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com
(cherry picked from commit 504c7bd85c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We already implemented the fault handler ourself,
just open code what is necessary here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392323/
Implement the fault handler ourself using the provided TTM functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392324/
We already implemented the fault handler ourself,
just open code what is necessary here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392322/
Just check earlier if a BO can be page faulted in the first place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392321/
Starting from the JZ4725B SoC, the primary and overlay planes support
24-bit pixel modes (8 bits per color component, without dummy byte).
Add support for these in the ingenic-drm driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-8-paul@crapouillou.net
Until now the ingenic-drm driver supported the same pixel formats on the
F0 and F1 planes, and across all SoCs. However, the F0 plane does support
paletted 8bpp, while the F1 plane doesn't.
Furthermore, the three SoCs currently supported all have different pixel
formats available; 24bpp was added in JZ4725B, 30bpp was added in
JZ4770.
Prepare the inclusion of paletted 8bpp, 24bpp and 30bpp support by
having separate pixel format lists for F0 and F1 planes.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-5-paul@crapouillou.net
Instead of calling dmam_alloc_coherent() once for each 4-bit DMA
hardware descriptor, we can have them both in a physical memory page, as
long as they are aligned to 16 bytes. This reduces memory consumption,
and will make it easier to add more DMA descriptors in the future.
Note that the old code would not create the F0 descriptor on SoCs that
don't support multiple planes. We don't care, because:
- we don't use more memory by allocating two descriptors instead of a
single one;
- the only SoC that does not support multiple planes (JZ4740) still has
two independent DMA channels, for an unknown reason.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-4-paul@crapouillou.net
Add support for static memory reserved from Device Tree. Since we're
using GEM buffers backed by CMA, it is interesting to have an option to
specify the CMA area where the GEM buffers will be allocated.
v2: Don't abort probe if reserved memory cannot be obtained. The driver
will still work fine provided the kernel configuration is sane.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-3-paul@crapouillou.net
Old Ingenic SoCs can overclock very well, up to +50% of their nominal
clock rate, whithout requiring overvolting or anything like that, just
by changing the rate of the main PLL. Unfortunately, all clocks on the
system are derived from that PLL, and when the PLL rate is updated, so
is our pixel clock.
To counter that issue, we make sure that the panel is in VBLANK before
the rate change happens, and we will then re-set the pixel clock rate
afterwards, once the PLL has been changed, to be as close as possible to
the pixel rate requested by the encoder.
v2: Add comment about mutex usage
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-2-paul@crapouillou.net
Fix the incorrect function prototype for dp_debug_get()
in the dp_debug module to address compilation warning.
Also add prototype for msm_dp_debugfs_init() for fixing compilation
issue with other defconfigs.
changes in v2:
- add prototype for msm_dp_debugfs_init()
Fixes: f913454aae ("drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Revert the guilty change introduced by the commit below:
drm/amd/pm: postpone SOCCLK/UCLK enablement after DAL initialization(V2)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result]
1284 | sysfs_create_group(&adev->dev->kobj, &group);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: just print an error for sysfs group creation failure
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge ras sysfs creation together by calling sysfs_create_group
once, as sysfs_update_group may not work properly as expected.
v2: improve commit message
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In FLR routine, init_data_exchange is called at reset_sriov
while fini_data_exchange is not. This will duplicating work
thread.
So call fini_data_exchange before reset for SRIOV
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Refactor the driver code to use amdgpu_virt_read_pf2vf_data
and amdgpu_virt_write_vf2pf_data instead of writing all code in
one function (which is the old amdgpu_virt_init_data_exchange)
- Adding a new transaction method for VF2PF message between host
and guest driver. Guest side will periodically update VF2PF
message in the framebuffer.
In the new header, we include guest ucode information, guest
framebuffer usage, and engine usage
- Clean up the old macros since they will cause compile error if
the new transaction method is used
v2: squash in build fix
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documents PP_FEATURE_MASK enum.
Provides instructions on how to use ppfeaturemasks.
v2: improve enum definitions and add kernel command line parameters to
ppfeaturemask instructions
v3: fix alignment issues
Signed-off-by: Ryan Taylor <ryan.taylor@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable UMC RAS in lieu of stability issues on certain sku
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to set different defaults on a per asic basis. This
way we can enable noretry on dGPUs where it can increase performance
in certain cases and disable it on chips where it can be problematic.
For now the default is 0 for all asics, but we may want to try and
enable it again for newer dGPUs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to have different defaults per asic
in a future patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to
accelerate sw_init for navi12.
v2: skip above fw in SRIOV for vega10 and sienna_cichlid
v3: directly skip psp fw loading in SRIOV
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc fw is not needed in SRIOV, thus driver should not try to get smc
fw data.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to clear event again since event always clear before wait.
This fix depend on patch:
"soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api"
Fixes: 2f965be7f9 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-10-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-9-git-send-email-dennis-yc.hsieh@mediatek.com
[mb: fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The HVS FIFOs are currently assigned each time we have an atomic_check
for all the enabled CRTCs.
However, if we are running multiple outputs in parallel and we happen to
disable the first (by index) CRTC, we end up changing the assigned FIFO
of the second CRTC without disabling and reenabling the pixelvalve which
ends up in a stall and eventually a VBLANK timeout.
In order to fix this, we can create a special value for our assigned
channel to mark it as disabled, and if our CRTC already had an assigned
channel in its previous state, we keep on using it.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-2-maxime@cerno.tech
The current CRTC state reset hook in vc4 allocates a vc4_crtc_state
structure as a drm_crtc_state, and relies on the fact that vc4_crtc_state
embeds drm_crtc_state as its first member, and therefore can be safely
cast.
However, this is pretty fragile especially since there's no check for this
in place, and we're going to need to access vc4_crtc_state member at reset
so this looks like a good occasion to make it more robust.
Fixes: 6d6e500391 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-1-maxime@cerno.tech
Most drivers that use VRAM helpers have only a few MiB of framebuffer
memory available. To reduce fragmentation, new BOs are now put into
system memory by default. Only pin operations are allowed to move BOs
into VRAM.
v2:
* rebased onto latest drm-tip
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-4-tzimmermann@suse.de
Don't override the GEM object functions unconditionally. If the driver
sets the GEM functions, VRAM helpers will not set them. The idea has been
taken from SHMEM helpers.
v2:
* updated the commit message (Sam)
* document the new feature for drm_gem_vram_create()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-3-tzimmermann@suse.de
The drm_gem_vram_create() function is the only caller of the internal
helper drm_gem_vram_init(). Streamline the code by putting all code into
the create function.
v2:
* rebased onto latest drm-tip
* fixed typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-2-tzimmermann@suse.de
Several GEM and PRIME callbacks have been deprecated in favor of
per-instance GEM object functions. Remove the callbacks as they are
now unused. The only exception is .gem_prime_mmap, which is still
in use by several drivers.
What is also gone is gem_vm_ops in struct drm_driver. All drivers now
use struct drm_gem_object_funcs.vm_ops instead.
While at it, the patch also improves error handling around calls
to .free and .get_sg_table callbacks.
v3:
* restore default call to drm_gem_prime_export() in
drm_gem_prime_handle_to_fd()
* return -ENOSYS if get_sg_table is not set
* drop all checks for obj->funcs
* clean up TODO list and documentation
v2:
* update related TODO item (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-23-tzimmermann@suse.de
The xlnx driver uses CMA helpers with default callback functions.
Initialize the driver structure with the rsp CMA helper macro. The
driver is being converted to use GEM object functions as part of
this change.
Two callbacks, .dumb_destroy and .gem_prime_import, were initialized
to their default implementations, so they are just kept empty now.
v2:
* initialize with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-22-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in xen. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v2:
* convert xen_drm_drv_free_object_unlocked() to static
callback (Oleksandr)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-21-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vkms.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-20-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces virtgpu's per-driver PRIME export
function with a per-object function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-19-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vgem. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-18-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vc4. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-17-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in tegra.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-16-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in rockchip. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v3:
* update documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-15-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in radeon.
v2:
* move object-function instance to radeon_gem.c (Christian)
* set callbacks in radeon_gem_object_create() (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-14-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in pl111. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v2:
* use drm_gem_cma_create_object_default_funcs() (Eric)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-13-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in omapdrm.
v2:
* make omap_gem_free_object() static (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-12-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in nouveau.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-11-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in msm. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-10-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in mediatek. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-9-tzimmermann@suse.de
The i.MX DCSS driver uses CMA helpers with default callback functions.
Initialize the driver structure with the rsp CMA helper macro. The
driver is being converted to use GEM object functions as part of
this change.
Two callbacks, .gem_prime_export and .gem_prime_import, were initialized
to their default implementations, so they are just kept empty now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-8-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in i915.
v2:
* move object-function instance to i915_gem_object.c (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-7-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-6-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in exynos. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-5-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in etnaviv. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-4-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in armada.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-3-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in amdgpu. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v3:
* remove amdgpu_object.c from patch (Christian)
v2:
* move object-function instance to amdgpu_gem.c (Christian)
* set callbacks in amdgpu_gem_object_create() (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-2-tzimmermann@suse.de
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS
configs, so don't set it in this ARM specific driver part.
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS
configs, so don't set it in this ARM specific driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
drm/i915 fixes for v5.9-rc7:
- Fix selftest reference to stack data out of scope
- Fix GVT null pointer dereference
- Backmerge from Linus' master to fix build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh5fpmha.fsf@intel.com
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com
Jason Yan