A broadcast packet is a multicast packet, no need to test twice.
Reorder one defective test in rtl_core of is_multi_ether_addr
before is_broadcast_ether_addr as the is_multi returns true for
broadcast frames.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mentioned by jesper juhl, we should probably change ContiuneDiffCount
to ContinueDiffCount. Below you will find the changes to do so. I have
compile tested this and everything builds with the changes, as for
testing on the hardware I am unable to do.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Routine rtllib_MlmeDisassociateRequest() has a comparison of memcpy()
with NULL, which makes no sense. Analysis of the code suggests that
memcmp() was intended.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible to misconfigure a kernel by selecting the rtllib crypto
routines without enabling the underlying support from the crypto library.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't use the rxcmdpkt[] counters at all and we can remove them.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/staging/rtl8192e/rtl8192e/rtl_core.c the follwing printk-message can be found:
printk(KERN_ERR "rtl8193e: Unable to allocate space "
This is quite obviously just a typo, all other similar messages use
"rtl8192e" and the string "rtl8193e" does not occur anywhere else in the
source of the driver.
Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/staging/rtl8192e/rtllib_softmac.c::rtllib_rx_assoc_resp()
we allocate memory for 'network' with kzalloc() and then proceed to
zero the already zeroed mem we got from kzalloc() with
memset(). That's redundant, so remove the memset()
We also fail to kfree() the memory we allocated for 'network' if we do not enter
if (ieee->current_network.qos_data.supported == 1) {
and the variable then goes out of scope.
To fix that I simply moved the kfree() that was inside that 'if'
statement to instead be just after it. It then covers both the case
where we take the branch and when we don't.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite a duplicated test to test the correct value
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression E;
@@
(
* E
|| ... || E
|
* E
&& ... && E
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert rtllib from registering the crypt drivers against rtllib_crypt
and instead register the against lib80211. The crypto functions have
R- prepended (R-CCMP, R-TKIP, R-WEP) so they will not clash with the
lib80211 versions.
We cannot use the lib80211 crypt drivers since the rtl8192e has some
hardware support that is not handled by the lib80211 crypt drivers.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert rtllib_crypt_data to lib80211_crypt_data and
rtllib_crypt_ops to lib80211_crypt_ops.
This is almost a 1:1 replacement, only extra_prefix_len and
extra_postfix_len changed.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add lib80211.h header file to rtllib.h and get it compiling.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtllib and rtllib_crypt drivers are both required for a fully
functional rtllib. Make sure both are always available by having
rtllib select rtllib_crypt.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "rtl8192e: Export symbols" patch exported three functions already
exported by the rtl8192u driver. This patch renames the three functions:
Dot11d_Init => dot11d_init
HTUpdateSelfAndPeerSetting => HT_update_self_and_peer_setting
IsLegalChannel => rtllib_legal_channel
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the rtl8192e driver is split up, it makes sense to keep the
rtllib code in one directory and the rtl8192e specific code in
another. This patch contains the split and the fixup of includes.
Since rtl_core.h already included rtllib.h and dot11d.h, rtl_core.h
was updated to point to the parent directory. All other references to
rtllib.h and dot11d.h in the rtl8192e specific code where deleted
rather than fixed. This leaves just one file that needs to know the
real location of the rtllib includes.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch splits the current r8192e_pci driver up into six different
drivers: rtllib, rtllib_crypt, rtllib_crypt_ccmp, rtllib_crypt_tkip,
rtllib_crypt_wep, and r8192e_pci.
Now that they are proper modules, the init and exit functions do not
need to be called directly. Also, the rtllib_*_null functions are not
needed since they will be loaded on demand.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192e driver had a natural split between the more generic
rtllib code and the more specific rtl8192e code. This patch exports
all the symbols needed by the r8192 specific code from the rtllib
generic code.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename rtl_debug.h to rtllib_debug.h. Source files should include
rtllib.h if they are generic and rtl_core.h if they are r8192e
specific. Files should never include both.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The RTL_DEBUG enum is used for rt_global_debug_component global
variable and RT_TRACE. It should be in rtl_debug.h and not rtl_core.h.
The rtl8192_proc_* functions are r8192 specific and should not be in
rtl_debug.h. Move them to rtl_core.h.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up rtl_debug.h by removing all the unused defines and
stub functions.
The changes to rtl_core.c are just to remove the deleted stub function
calls.
The changes to rtl_debug.c are functions that are never called.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup rather than duplicating its implementation
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup rather than duplicating its implementation
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kzalloc rather than kmalloc followed by memset with 0
This considers some simple cases that are common and easy to validate
Note in particular that there are no ...s in the rule, so all of the
matched code has to be contiguous
The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/kzalloc-simple.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has always been enabled unconditionally by ccflags-y.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code paths using these defines have been removed long time ago,
now remove stale references from injected ccflags-y.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rtllib_is_shortslot() takes one argument - a struct that's more than a
kilobyte large. It should take a pointer instead of copying such a
huge struct - and the argument might as well be declared 'const' now
that we are at it, since it is not modified. This patch makes these
changes.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
COUNTRY_CODE_MAX is not a valid country code. We're off by one here.
This gets passed to Dot11d_Channelmap() where it's used as an offset
into the ChannelPlan[] array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Smatch reports the follwing warnings:
CHECK drivers/staging/rtl8192e/rtllib_rx.c
drivers/staging/rtl8192e/rtllib_rx.c +552 RxReorderIndicatePacket(6) warn: 'prxbIndicateArray' puts 1024 bytes on stack
CHECK drivers/staging/rtl8192e/rtl819x_TSProc.c
drivers/staging/rtl8192e/rtl819x_TSProc.c +40 RxPktPendingTimeout(9) warn: 'stats_IndicateArray' puts 1024 bytes on stack
CHECK drivers/staging/rtl8192e/r8192E_phy.c
drivers/staging/rtl8192e/r8192E_phy.c +859 rtl8192_phy_SwChnlStepByStep(11) warn: function puts 797 bytes on stack
CHECK drivers/staging/rtl8192e/rtllib_rx.c
drivers/staging/rtl8192e/rtllib_rx.c +552 RxReorderIndicatePacket(6) warn: 'prxbIndicateArray' puts 1024 bytes on stack
These are fixed by adding the arrays in question as a union in a struct used
by nearly all routines.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Smatch outputs the following warning:
CHECK drivers/staging/rtl8192e/rtl819x_BAProc.c
drivers/staging/rtl8192e/rtl819x_BAProc.c +88 rtllib_ADDBA(12) warn: variable dereferenced before check 'ieee'
As ieee cannot be NULL at this point, remove all such checks.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Smatch shows the following errors:
CHECK drivers/staging/rtl8192e/rtl_core.c
drivers/staging/rtl8192e/rtl_core.c +600 rtl8192_qos_activate(7) warn: variable dereferenced before check 'priv'
drivers/staging/rtl8192e/rtl_core.c +1345 rtl8192_init(40) warn: 'dev->irq' was not released on error
drivers/staging/rtl8192e/rtl_core.c +2120 rtl8192_alloc_rx_desc_ring(43) error: potential null derefence 'entry'.
drivers/staging/rtl8192e/rtl_core.c +3010 rtl8192_pci_probe(153) warn: 'pmem_start' was not released on error
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
File rtl_core.c contains the statement "#define MOVE_INTO_HANDLER". As a
result, everything inside an "ifndef MOVE_INTO_HANDLER" is dead code and
can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/rtl8192e/rtllib.h:2329: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192e/rtllib.h:2330: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192e/rtllib.h:2331: error: field 'ips_sem' has incomplete type
drivers/staging/rtl8192e/rtllib_wx.c:267: error: implicit declaration of function 'down'
drivers/staging/rtl8192e/rtllib_wx.c:290: error: implicit declaration of function 'up'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Smatch outputs the following message:
drivers/staging/rtl8192e/r8192E_cmdpkt.c +412 cmpk_message_handle_rx(70)
error: buffer overflow 'priv->stats.rxcmdpkt' 4 <= 7
407 RT_TRACE(COMP_CMDPKT, "---->cmpk_message_handle_rx():"
408 "unknow CMD Element\n");
409 return 1;
410 }
411
412 priv->stats.rxcmdpkt[element_id]++;
^^^^^^^^^^
->stats.rxcmdpkt[] only has 4 elements, but from the switch statement
in the section before we can see that element_id can go up to 7
(RX_TX_RATE_HISTORY).
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/r8192E: (25 commits)
rtl8192e: update for ndo_set_multicast_list removal.
staging: rtl8192e: Add endian checking switch to Makefile
staging: rtl8192e: Fix sparse (non-endian) warnings - Part II
staging: rtl8192e: Fix sparse (non-endian) messages - Part I
staging: rtl8192e: Remove MAC_FMT and MAC_ARG for %pM
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVIII
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVII
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVI
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XV
staging: rtl8192e: Cleanup checkpatch -f errors - Part XIV
staging: rtl8192e: Cleanup checkpatch -f errors - Part XIII
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XII
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XI
staging: rtl8192e: Cleanup checkpatch -f errors - Part X
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part IX
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VIII
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VII
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VI
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part V
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part IV
...
After merging the staging tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/staging/rtl8192e/rtl_core.c:2917:2: error: unknown field 'ndo_set_multicast_list' specified in initializer
Caused by commit 94a799425e ("From: wlanfae <wlanfae@realtek.com>" -
really "[PATCH 1/8] rtl8192e: Import new version of driver from realtek"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Joe Perches