mirror of https://gitee.com/openkylin/linux.git
22539 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Dan Williams
|
a927bd6ba9 |
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid(). That
symbol is exported for modules. However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=y
...and:
CONFIG_NUMA_KEEP_MEMINFO=n
CONFIG_MEMORY_HOTPLUG=y
...it failed to export the symbol in the case of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=n
Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.
Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols. Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.
The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h. In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h. An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.
The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.
[dan.j.williams@intel.com: v4]
Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes:
|
|
|
Linus Torvalds
|
dda3f4252e |
powerpc fixes for CVE-2020-4788
From Daniel's cover letter: IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch series flushes the L1 cache on kernel entry (patch 2) and after the kernel performs any user accesses (patch 3). It also adds a self-test and performs some related cleanups. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl+2aqETHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgG+hD/4njSFct2amqWfqDYR9b2OykWmnMQXn geookk5SbItQF7vh1q2SVA6r43s5ZAxgD5fezx4LgG6p3QU39+Tr0RhzUUHWMPDV UNGZK6x/N/GSYeq0bqvMHmVwS0FDjPE8nOtA8Hn2T9mUUsu9G0okpgYPLnEu6rb1 gIyS35zlLBh9obi3MfJzyln/AmCE7hdonKRtLAxvGiERJAyfAG757lrdjrwavyHy mwz+XPl5PF88jfO5cbcZT9gNHmZZPzVsOVwNcstCh2FcwuePv9dWe1pxsBxxKqP5 UXceXPcKM7VlRNmehimq7q/hfbget4RJGGKYPNXeKHOo6yfy7lJPiQV4h+5z2pSs SPP2fQQPq0aubmcO23CXFtZl4WRHQ4pax6opepnpIfC2vZ0HLXJtPrhMKcbFJNTo qPis6HWQPpIuI6l4MJfs+YO9ETxCR31Yd28qFAfPFoHlnQZTfx6NPhw8HKxTbSh2 Svr4X6Y14j3UsQgLTCArCXWAG/hlfRwxDZJ4AvR9EU0HJGDyZ45Y+LTD1N8bbsny zcYfPqWGPIanLcNPNFYIQwDZo7ff08KdmngUvf/Q9om60mP1hsPJMHf6VhPXj4fC 2TZ11fORssSlBSNtIkFkbjEG+aiWtWnz3fN3uSyT50rgGwtDHJzVzLiUWHlZKcxW X73YdxuT8fqQwg== =Yibq -----END PGP SIGNATURE----- Merge tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes for CVE-2020-4788. From Daniel's cover letter: IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch series flushes the L1 cache on kernel entry (patch 2) and after the kernel performs any user accesses (patch 3). It also adds a self-test and performs some related cleanups" * tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations selftests/powerpc: refactor entry and rfi_flush tests selftests/powerpc: entry flush test powerpc: Only include kup-radix.h for 64-bit Book3S powerpc/64s: flush L1D after user accesses powerpc/64s: flush L1D on kernel entry selftests/powerpc: rfi_flush: disable entry flush if present |
|
|
Daniel Axtens
|
da631f7fd6 |
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
pseries|pnv_setup_rfi_flush already does the count cache flush setup, and we just added entry and uaccess flushes. So the name is not very accurate any more. In both platforms we then also immediately setup the STF flush. Rename them to _setup_security_mitigations and fold the STF flush in. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
|
|
Michael Ellerman
|
178d52c6e8 |
powerpc: Only include kup-radix.h for 64-bit Book3S
In kup.h we currently include kup-radix.h for all 64-bit builds, which includes Book3S and Book3E. The latter doesn't make sense, Book3E never uses the Radix MMU. This has worked up until now, but almost by accident, and the recent uaccess flush changes introduced a build breakage on Book3E because of the bad structure of the code. So disentangle things so that we only use kup-radix.h for Book3S. This requires some more stubs in kup.h and fixing an include in syscall_64.c. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
|
|
Nicholas Piggin
|
9a32a7e78b |
powerpc/64s: flush L1D after user accesses
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
|
|
Nicholas Piggin
|
f79643787e |
powerpc/64s: flush L1D on kernel entry
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
|
|
Linus Torvalds
|
64b609d6a6 |
A set of fixes for perf:
- A set of commits which reduce the stack usage of various perf event
handling functions which allocated large data structs on stack causing
stack overflows in the worst case.
- Use the proper mechanism for detecting soft interrupts in the recursion
protection.
- Make the resursion protection simpler and more robust.
- Simplify the scheduling of event groups to make the code more robust and
prepare for fixing the issues vs. scheduling of exclusive event groups.
- Prevent event multiplexing and rotation for exclusive event groups
- Correct the perf event attribute exclusive semantics to take pinned
events, e.g. the PMU watchdog, into account
- Make the anythread filtering conditional for Intel's generic PMU
counters as it is not longer guaranteed to be supported on newer
CPUs. Check the corresponding CPUID leaf to make sure.
- Fixup a duplicate initialization in an array which was probably cause by
the usual copy & paste - forgot to edit mishap.
-----BEGIN PGP SIGNATURE-----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=FzCf
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes for perf:
- A set of commits which reduce the stack usage of various perf
event handling functions which allocated large data structs on
stack causing stack overflows in the worst case
- Use the proper mechanism for detecting soft interrupts in the
recursion protection
- Make the resursion protection simpler and more robust
- Simplify the scheduling of event groups to make the code more
robust and prepare for fixing the issues vs. scheduling of
exclusive event groups
- Prevent event multiplexing and rotation for exclusive event groups
- Correct the perf event attribute exclusive semantics to take
pinned events, e.g. the PMU watchdog, into account
- Make the anythread filtering conditional for Intel's generic PMU
counters as it is not longer guaranteed to be supported on newer
CPUs. Check the corresponding CPUID leaf to make sure
- Fixup a duplicate initialization in an array which was probably
caused by the usual 'copy & paste - forgot to edit' mishap"
* tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix Add BW copypasta
perf/x86/intel: Make anythread filter support conditional
perf: Tweak perf_event_attr::exclusive semantics
perf: Fix event multiplexing for exclusive groups
perf: Simplify group_sched_in()
perf: Simplify group_sched_out()
perf/x86: Make dummy_iregs static
perf/arch: Remove perf_sample_data::regs_user_copy
perf: Optimize get_recursion_context()
perf: Fix get_recursion_context()
perf/x86: Reduce stack usage for x86_pmu::drain_pebs()
perf: Reduce stack usage of perf_output_begin()
|
|
|
Peter Zijlstra
|
76a4efa809 |
perf/arch: Remove perf_sample_data::regs_user_copy
struct perf_sample_data lives on-stack, we should be careful about it's size. Furthermore, the pt_regs copy in there is only because x86_64 is a trainwreck, solve it differently. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/20201030151955.258178461@infradead.org |
|
|
Peter Zijlstra
|
267fb27352 |
perf: Reduce stack usage of perf_output_begin()
__perf_output_begin() has an on-stack struct perf_sample_data in the unlikely case it needs to generate a LOST record. However, every call to perf_output_begin() must already have a perf_sample_data on-stack. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201030151954.985416146@infradead.org |
|
|
Scott Cheloha
|
3fb4a8fa28 |
powerpc/numa: Fix build when CONFIG_NUMA=n
Add a non-NUMA definition for of_drconf_to_nid_single() to topology.h
so we have one even if powerpc/mm/numa.c is not compiled. On a
non-NUMA kernel the appropriate node id is always first_online_node.
Fixes:
|
|
|
Christophe Leroy
|
33fe43cfd9 |
powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
When _PAGE_ACCESSED is not set, a minor fault is expected. To do this, TLB miss exception ANDs _PAGE_PRESENT and _PAGE_ACCESSED into the L2 entry valid bit. To simplify the processing and reduce the number of instructions in TLB miss exceptions, manage it as an APG bit and get it next to _PAGE_GUARDED bit to allow a copy in one go. Then declare the corresponding groups as handling all accesses as user accesses. As the PP bits always define user as No Access, it will generate a fault. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/80f488db230c6b0e7b3b990d72bd94a8a069e93e.1602492856.git.christophe.leroy@csgroup.eu |
|
|
Christophe Leroy
|
29daf869cb |
powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP. Make sure a minor fault is taken to set _PAGE_ACCESSED when it is not already set, regardless of the selection of CONFIG_SWAP. This adds at least 3 instructions to the TLB miss exception handlers fast path. Following patch will reduce this overhead. Also update the rotation instruction to the correct number of bits to reflect all changes done to _PAGE_ACCESSED over time. Fixes: |
|
|
Christophe Leroy
|
0540b0d2ce |
powerpc/40x: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
Fixes:
|
|
|
Christophe Leroy
|
11522448e6 |
powerpc/603: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
Fixes:
|
|
|
Michael Ellerman
|
1344a23201 |
powerpc: Use asm_goto_volatile for put_user()
Andreas reported that commit |
|
|
Qian Cai
|
99f070b623 |
powerpc/smp: Call rcu_cpu_starting() earlier
The call to rcu_cpu_starting() in start_secondary() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows (with CONFIG_PROVE_RCU_LIST=y):
WARNING: suspicious RCU usage
-----------------------------
kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x128/0x14c
__lock_acquire+0x1060/0x1c60
lock_acquire+0x140/0x5f0
_raw_spin_lock_irqsave+0x64/0xb0
clockevents_register_device+0x74/0x270
register_decrementer_clockevent+0x94/0x110
start_secondary+0x134/0x800
start_secondary_prolog+0x10/0x14
This is avoided by adding a call to rcu_cpu_starting() near the
beginning of the start_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into
lockdep before RCU has declared the CPU to be watched for readers.
It's safe to call rcu_cpu_starting() in the arch code as well as later
in generic code, as explained by Paul:
It uses a per-CPU variable so that RCU pays attention only to the
first call to rcu_cpu_starting() if there is more than one of them.
This is even intentional, due to there being a generic
arch-independent call to rcu_cpu_starting() in
notify_cpu_starting().
So multiple calls to rcu_cpu_starting() are fine by design.
Fixes:
|
|
|
Qian Cai
|
fd552e0542 |
powerpc/eeh_cache: Fix a possible debugfs deadlock
Lockdep complains that a possible deadlock below in
eeh_addr_cache_show() because it is acquiring a lock with IRQ enabled,
but eeh_addr_cache_insert_dev() needs to acquire the same lock with IRQ
disabled. Let's just make eeh_addr_cache_show() acquire the lock with
IRQ disabled as well.
CPU0 CPU1
---- ----
lock(&pci_io_addr_cache_root.piar_lock);
local_irq_disable();
lock(&tp->lock);
lock(&pci_io_addr_cache_root.piar_lock);
<Interrupt>
lock(&tp->lock);
*** DEADLOCK ***
lock_acquire+0x140/0x5f0
_raw_spin_lock_irqsave+0x64/0xb0
eeh_addr_cache_insert_dev+0x48/0x390
eeh_probe_device+0xb8/0x1a0
pnv_pcibios_bus_add_device+0x3c/0x80
pcibios_bus_add_device+0x118/0x290
pci_bus_add_device+0x28/0xe0
pci_bus_add_devices+0x54/0xb0
pcibios_init+0xc4/0x124
do_one_initcall+0xac/0x528
kernel_init_freeable+0x35c/0x3fc
kernel_init+0x24/0x148
ret_from_kernel_thread+0x5c/0x80
lock_acquire+0x140/0x5f0
_raw_spin_lock+0x4c/0x70
eeh_addr_cache_show+0x38/0x110
seq_read+0x1a0/0x660
vfs_read+0xc8/0x1f0
ksys_read+0x74/0x130
system_call_exception+0xf8/0x1d0
system_call_common+0xe8/0x218
Fixes:
|
|
|
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Linus Torvalds
|
b6f96e75ae |
powerpc fixes for 5.10 #2
A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation of VSX loads. The affected CPUs were not widely available. Two fixes for machine check handling in guests under PowerVM. A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y. Three fixes for races in the handling of some of our powernv sysfs attributes. One change to remove TM from the set of Power10 CPU features. A couple of other minor fixes. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju, Vasant Hegde. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl+UASATHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgAbpD/4nN+0cM7M2iCPL1cqd3nmzziJ/tXsq 1ZxU+2B+cU+pUy4LHgtH1arJb85iVqFR3cC9j705uo6kO9vqsppTj2752srSEioM er1UxzRza/lNZaVGaywCD9oApayPkzg74IbenXDDduI+oWvQuvWZbSBskJfdARg2 7kBFhV7w8sUGa8e/JS1FITndPPO9tMurk+s0FgP4cjsGM/iTW8eUfGcOFsOlc+uZ tybZUCY/G4E77etE1KHVjw8IcwSh0P/ibQ6nLnIFpOtPCRs5tTqbuARYN8U55M9H 0ebt3sv5QTyNvZY0bm5p9ZsC1AKyciUO5SWPNEEwzOdyYVQjlofHj3UvcHKW2D1t ymbglsdQeXM5uuexa23ape1e3UuwW1JhsHTQLnCbI3C/snkMA3ZegVsS66GIMXn2 C0gef0RzQ7HrvwUEl3V/b6W87LL6NpGU6RRWyva7/0pLMZkMtKpGgWg/hVzPRTcC 6yoUVWNN5p7pZu6VDkoqdJuw7hQPyo7t5Kj71G+/SdH5engcFjnbBxDiEge/4a7+ RluvswpCn9SyyEvS2BL262LSPq8iYH4+at6n+uLbonZSY0P9Z5zSpPpkNJkyTnwz GXj1DBSEOBDZQ7pFeoCFOeYoo1Yk5EQpmA7YuxnZkzOdxFpIUgFU1wdRemzVZw2o PTw5VHoRgCmIsQ== =LMZv -----END PGP SIGNATURE----- Merge tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation of VSX loads. The affected CPUs were not widely available. - Two fixes for machine check handling in guests under PowerVM. - A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y. - Three fixes for races in the handling of some of our powernv sysfs attributes. - One change to remove TM from the set of Power10 CPU features. - A couple of other minor fixes. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju, Vasant Hegde. * tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Avoid using addr_to_pfn in real mode powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9 powerpc/eeh: Fix eeh_dev_check_failure() for PE#0 powerpc/64s: Remove TM from Power10 features selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation powerpc/powernv/dump: Handle multiple writes to ack attribute powerpc/powernv/dump: Fix race while processing OPAL dump powerpc/smp: Use GFP_ATOMIC while allocating tmp mask powerpc/smp: Remove unnecessary variable powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash powerpc/opal_elog: Handle multiple writes to ack attribute |
|
|
Linus Torvalds
|
f9a705ad1c |
ARM:
- New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes For x86, also included in this pull request is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg== =AD6a -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ... |
|
|
Linus Torvalds
|
4a22709e21 |
arch-cleanup-2020-10-22
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
|
|
|
Linus Torvalds
|
746b25b1aa |
Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
|
|
|
Linus Torvalds
|
f56e65dff6 |
Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
|
|
|
Ganesh Goudar
|
4ff753feab |
powerpc/pseries: Avoid using addr_to_pfn in real mode
When an UE or memory error exception is encountered the MCE handler
tries to find the pfn using addr_to_pfn() which takes effective
address as an argument, later pfn is used to poison the page where
memory error occurred, recent rework in this area made addr_to_pfn
to run in real mode, which can be fatal as it may try to access
memory outside RMO region.
Have two helper functions to separate things to be done in real mode
and virtual mode without changing any functionality. This also fixes
the following error as the use of addr_to_pfn is now moved to virtual
mode.
Without this change following kernel crash is seen on hitting UE.
[ 485.128036] Oops: Kernel access of bad area, sig: 11 [#1]
[ 485.128040] LE SMP NR_CPUS=2048 NUMA pSeries
[ 485.128047] Modules linked in:
[ 485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22
[ 485.128074] NIP: c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0
[ 485.128078] REGS: c000000003f1f970 TRAP: 0300 Tainted: G OE (5.7.0)
[ 485.128082] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008284 XER: 00000001
[ 485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1
[ 485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000
[ 485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022
[ 485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14
[ 485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000
[ 485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100
[ 485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50
[ 485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a
[ 485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a
[ 485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310
[ 485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170
[ 485.128133] Call Trace:
[ 485.128135] Instruction dump:
[ 485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff
[ 485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040
[ 485.128152] ---[ end trace d34b27e29ae0e340 ]---
Fixes:
|
|
|
Christophe Leroy
|
592bbe9c50 |
powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9
GCC 4.9 sometimes fails to build with "m<>" constraint in
inline assembly.
CC lib/iov_iter.o
In file included from ./arch/powerpc/include/asm/cmpxchg.h:6:0,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:7,
from ./include/linux/crypto.h:15,
from ./include/crypto/hash.h:11,
from lib/iov_iter.c:2:
lib/iov_iter.c: In function 'iovec_from_user.part.30':
./arch/powerpc/include/asm/uaccess.h:287:2: error: 'asm' operand has impossible constraints
__asm__ __volatile__( \
^
./include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
# define unlikely(x) __builtin_expect(!!(x), 0)
^
./arch/powerpc/include/asm/uaccess.h:583:34: note: in expansion of macro 'unsafe_op_wrap'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
./arch/powerpc/include/asm/uaccess.h:329:10: note: in expansion of macro '__get_user_asm'
case 4: __get_user_asm(x, (u32 __user *)ptr, retval, "lwz"); break; \
^
./arch/powerpc/include/asm/uaccess.h:363:3: note: in expansion of macro '__get_user_size_allowed'
__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
^
./arch/powerpc/include/asm/uaccess.h💯2: note: in expansion of macro '__get_user_nocheck'
__get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
^
./arch/powerpc/include/asm/uaccess.h:583:49: note: in expansion of macro '__get_user_allowed'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
lib/iov_iter.c:1663:3: note: in expansion of macro 'unsafe_get_user'
unsafe_get_user(len, &uiov[i].iov_len, uaccess_end);
^
make[1]: *** [scripts/Makefile.build:283: lib/iov_iter.o] Error 1
Define a UPD_CONSTR macro that is "<>" by default and
only "" with GCC prior to GCC 5.
Fixes:
|
|
|
Oliver O'Halloran
|
99f6e9795a |
powerpc/eeh: Fix eeh_dev_check_failure() for PE#0
In commit |
|
|
Joe Perches
|
a4f1d94e6b |
KVM: PPC: Book3S HV: Make struct kernel_param_ops definition const
This should be const, so make it so. Signed-off-by: Joe Perches <joe@perches.com> Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Jordan Niethe
|
ec613a57fa |
powerpc/64s: Remove TM from Power10 features
ISA v3.1 removes transactional memory and hence it should not be present
in cpu_features or cpu_user_features2. Remove CPU_FTR_TM_COMP from
CPU_FTRS_POWER10. Remove PPC_FEATURE2_HTM_COMP and
PPC_FEATURE2_HTM_NOSC_COMP from COMMON_USER2_POWER10.
Fixes:
|
|
|
Michael Neuling
|
1da4a0272c |
powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation
__get_user_atomic_128_aligned() stores to kaddr using stvx which is a
VMX store instruction, hence kaddr must be 16 byte aligned otherwise
the store won't occur as expected.
Unfortunately when we call __get_user_atomic_128_aligned() in
p9_hmi_special_emu(), the buffer we pass as kaddr (ie. vbuf) isn't
guaranteed to be 16B aligned. This means that the write to vbuf in
__get_user_atomic_128_aligned() has the bottom bits of the address
truncated. This results in other local variables being
overwritten. Also vbuf will not contain the correct data which results
in the userspace emulation being wrong and hence undetected user data
corruption.
In the past we've been mostly lucky as vbuf has ended up aligned but
this is fragile and isn't always true. CONFIG_STACKPROTECTOR in
particular can change the stack arrangement enough that our luck runs
out.
This issue only occurs on POWER9 Nimbus <= DD2.1 bare metal.
The fix is to align vbuf to a 16 byte boundary.
Fixes:
|
|
|
Vasant Hegde
|
358ab796ce |
powerpc/powernv/dump: Handle multiple writes to ack attribute
Even though we use self removing sysfs helper, we still need to make sure we do the final kobject delete conditionally. sysfs_remove_file_self() will handle parallel calls to remove the sysfs attribute file and returns true only in the caller that removed the attribute file. The other parallel callers are returned false. Do the final kobject delete checking the return value of sysfs_remove_file_self(). Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201017164236.264713-1-hegdevasant@linux.vnet.ibm.com |
|
|
Vasant Hegde
|
0a43ae3e2b |
powerpc/powernv/dump: Fix race while processing OPAL dump
Every dump reported by OPAL is exported to userspace through a sysfs
interface and notified using kobject_uevent(). The userspace daemon
(opal_errd) then reads the dump and acknowledges that the dump is
saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.
However it's possible the userspace daemon may already be scanning
dump entries when a new sysfs dump entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
dump_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash.
This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().
The function create_dump_obj() returns the dump object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_dump_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.
Fixes:
|
|
|
Srikar Dronamraju
|
84dbf66c63 |
powerpc/smp: Use GFP_ATOMIC while allocating tmp mask
Qian Cai reported a regression where CPU Hotplug fails with the latest powerpc/next BUG: sleeping function called from invalid context at mm/slab.h:494 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/88 no locks held by swapper/88/0. irq event stamp: 18074448 hardirqs last enabled at (18074447): [<c0000000001a2a7c>] tick_nohz_idle_enter+0x9c/0x110 hardirqs last disabled at (18074448): [<c000000000106798>] do_idle+0x138/0x3b0 do_idle at kernel/sched/idle.c:253 (discriminator 1) softirqs last enabled at (18074440): [<c0000000000bbec4>] irq_enter_rcu+0x94/0xa0 softirqs last disabled at (18074439): [<c0000000000bbea0>] irq_enter_rcu+0x70/0xa0 CPU: 88 PID: 0 Comm: swapper/88 Tainted: G W 5.9.0-rc8-next-20201007 #1 Call Trace: [c00020000a4bfcf0] [c000000000649e98] dump_stack+0xec/0x144 (unreliable) [c00020000a4bfd30] [c0000000000f6c34] ___might_sleep+0x2f4/0x310 [c00020000a4bfdb0] [c000000000354f94] slab_pre_alloc_hook.constprop.82+0x124/0x190 [c00020000a4bfe00] [c00000000035e9e8] __kmalloc_node+0x88/0x3a0 slab_alloc_node at mm/slub.c:2817 (inlined by) __kmalloc_node at mm/slub.c:4013 [c00020000a4bfe80] [c0000000006494d8] alloc_cpumask_var_node+0x38/0x80 kmalloc_node at include/linux/slab.h:577 (inlined by) alloc_cpumask_var_node at lib/cpumask.c:116 [c00020000a4bfef0] [c00000000003eedc] start_secondary+0x27c/0x800 update_mask_by_l2 at arch/powerpc/kernel/smp.c:1267 (inlined by) add_cpu_to_masks at arch/powerpc/kernel/smp.c:1387 (inlined by) start_secondary at arch/powerpc/kernel/smp.c:1420 [c00020000a4bff90] [c00000000000c468] start_secondary_resume+0x10/0x14 Allocating a temporary mask while performing a CPU Hotplug operation with CONFIG_CPUMASK_OFFSTACK enabled, leads to calling a sleepable function from a atomic context. Fix this by allocating the temporary mask with GFP_ATOMIC flag. Also instead of having to allocate twice, allocate the mask in the caller so that we only have to allocate once. If the allocation fails, assume the mask to be same as sibling mask, which will make the scheduler to drop this domain for this CPU. Fixes: |
|
|
Srikar Dronamraju
|
966730a6e8 |
powerpc/smp: Remove unnecessary variable
Commit |
|
|
Minchan Kim
|
ecb8ac8b1f |
mm/madvise: introduce process_madvise() syscall: an external memory hinting API
There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.
The information required to make the reclaim decision is not known to the
app. Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.
To solve the issue, this patch introduces a new syscall
process_madvise(2). It uses pidfd of an external process to give the
hint. It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement. I
think it would be bigger in real practice because the testing ran very
cache friendly environment).
Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations. In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment. With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.
ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.
I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky. Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone. Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.
If someone want to add other hints, we could hear the usecase and review
it for each hint. It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.
So finally, the API is as follows,
ssize_t process_madvise(int pidfd, const struct iovec *iovec,
unsigned long vlen, int advice, unsigned int flags);
DESCRIPTION
The process_madvise() system call is used to give advice or directions
to the kernel about the address ranges from external process as well as
local process. It provides the advice to address ranges of process
described by iovec and vlen. The goal of such advice is to improve
system or application performance.
The pidfd selects the process referred to by the PID file descriptor
specified in pidfd. (See pidofd_open(2) for further information)
The pointer iovec points to an array of iovec structures, defined in
<sys/uio.h> as:
struct iovec {
void *iov_base; /* starting address */
size_t iov_len; /* number of bytes to be advised */
};
The iovec describes address ranges beginning at address(iov_base)
and with size length of bytes(iov_len).
The vlen represents the number of elements in iovec.
The advice is indicated in the advice argument, which is one of the
following at this moment if the target process specified by pidfd is
external.
MADV_COLD
MADV_PAGEOUT
Permission to provide a hint to external process is governed by a
ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).
The process_madvise supports every advice madvise(2) has if target
process is in same thread group with calling process so user could
use process_madvise(2) to extend existing madvise(2) to support
vector address ranges.
RETURN VALUE
On success, process_madvise() returns the number of bytes advised.
This return value may be less than the total number of requested
bytes, if an error occurred. The caller should check return value
to determine whether a partial advice occurred.
FAQ:
Q.1 - Why does any external entity have better knowledge?
Quote from Sandeep
"For Android, every application (including the special SystemServer)
are forked from Zygote. The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.
After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.
In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.
So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.
Besides, we can never rely on applications to clean things up
themselves. We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.
So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.
- ssp
Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?
process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called. If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect. It's the
responsibility of the process calling process_madvise to close this
race condition. For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called. Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process. Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm. The suggested API itself does not provide synchronization. It
also apply other APIs like move_pages, process_vm_write.
The race isn't really a problem though. Why is it so wrong to require
that callers do their own synchronization in some manner? Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something. Think about mmap. It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before. That's where we need synchronization by using other API or
design from userside. It shouldn't be part of API itself. If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3]. Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.
To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.
Q.3 - Why doesn't ptrace work?
Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA. Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill. It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.
[1] https://developer.android.com/topic/performance/memory"
[2] process_getinfo for getting the cookie which is updated whenever
vma of process address layout are changed - Daniel Colascione -
https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224
[3] anonymous fd which is used for the object(i.e., address range)
validation - Michal Hocko -
https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/
[minchan@kernel.org: fix process_madvise build break for arm64]
Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Jens Axboe
|
3c532798ec |
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
All the callers currently do this, clean it up and move the clearing into tracehook_notify_resume() instead. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
|
|
Linus Torvalds
|
96685f8666 |
powerpc updates for 5.10
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
|
|
|
Linus Torvalds
|
c4cf498dc0 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "155 patches. Subsystems affected by this patch series: mm (dax, debug, thp, readahead, page-poison, util, memory-hotplug, zram, cleanups), misc, core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch, binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan, romfs, and fault-injection" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits) lib, uaccess: add failure injection to usercopy functions lib, include/linux: add usercopy failure capability ROMFS: support inode blocks calculation ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang sched.h: drop in_ubsan field when UBSAN is in trap mode scripts/gdb/tasks: add headers and improve spacing format scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command kernel/relay.c: drop unneeded initialization panic: dump registers on panic_on_warn rapidio: fix the missed put_device() for rio_mport_add_riodev rapidio: fix error handling path nilfs2: fix some kernel-doc warnings for nilfs2 autofs: harden ioctl table ramfs: fix nommu mmap with gaps in the page cache mm: remove the now-unnecessary mmget_still_valid() hack mm/gup: take mmap_lock in get_dump_page() binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot coredump: rework elf/elf_fdpic vma_dump_size() into common helper coredump: refactor page range dumping into common helper coredump: let dump_emit() bail out on short writes ... |
|
|
David Hildenbrand
|
b611719978 |
mm/memory_hotplug: prepare passing flags to add_memory() and friends
We soon want to pass flags, e.g., to mark added System RAM resources. mergeable. Prepare for that. This patch is based on a similar patch by Oscar Salvador: https://lkml.kernel.org/r/20190625075227.15193-3-osalvador@suse.de Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Juergen Gross <jgross@suse.com> # Xen related part Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Libor Pechacek <lpechacek@suse.cz> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Leonardo Bras <leobras.c@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julien Grall <julien@xen.org> Cc: Kees Cook <keescook@chromium.org> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richardw.yang@linux.intel.com> Link: https://lkml.kernel.org/r/20200911103459.10306-5-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Aneesh Kumar K.V
|
379c926d63 |
powerpc/mm: move setting pte specific flags to pfn_pte
powerpc used to set the pte specific flags in set_pte_at(). This is different from other architectures. To be consistent with other architecture update pfn_pte to set _PAGE_PTE on ppc64. Also, drop now unused pte_mkpte. We add a VM_WARN_ON() to catch the usage of calling set_pte_at() without setting _PAGE_PTE bit. We will remove that after a few releases. With respect to huge pmd entries, pmd_mkhuge() takes care of adding the _PAGE_PTE bit. [akpm@linux-foundation.org: whitespace fix, per Christophe] Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: https://lkml.kernel.org/r/20200902114222.181353-3-aneesh.kumar@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Aneesh Kumar K.V
|
392b466981 |
powerpc/mm: add DEBUG_VM WARN for pmd_clear
Patch series "mm/debug_vm_pgtable fixes", v4.
This patch series includes fixes for debug_vm_pgtable test code so that
they follow page table updates rules correctly. The first two patches
introduce changes w.r.t ppc64.
Hugetlb test is disabled on ppc64 because that needs larger change to satisfy
page table update rules.
These tests are broken w.r.t page table update rules and results in kernel
crash as below.
[ 21.083519] kernel BUG at arch/powerpc/mm/pgtable.c:304!
cpu 0x0: Vector: 700 (Program Check) at [c000000c6d1e76c0]
pc: c00000000009a5ec: assert_pte_locked+0x14c/0x380
lr: c0000000005eeeec: pte_update+0x11c/0x190
sp: c000000c6d1e7950
msr: 8000000002029033
current = 0xc000000c6d172c80
paca = 0xc000000003ba0000 irqmask: 0x03 irq_happened: 0x01
pid = 1, comm = swapper/0
kernel BUG at arch/powerpc/mm/pgtable.c:304!
[link register ] c0000000005eeeec pte_update+0x11c/0x190
[c000000c6d1e7950] 0000000000000001 (unreliable)
[c000000c6d1e79b0] c0000000005eee14 pte_update+0x44/0x190
[c000000c6d1e7a10] c000000001a2ca9c pte_advanced_tests+0x160/0x3d8
[c000000c6d1e7ab0] c000000001a2d4fc debug_vm_pgtable+0x7e8/0x1338
[c000000c6d1e7ba0] c0000000000116ec do_one_initcall+0xac/0x5f0
[c000000c6d1e7c80] c0000000019e4fac kernel_init_freeable+0x4dc/0x5a4
[c000000c6d1e7db0] c000000000012474 kernel_init+0x24/0x160
[c000000c6d1e7e20] c00000000000cbd0 ret_from_kernel_thread+0x5c/0x6c
With DEBUG_VM disabled
[ 20.530152] BUG: Kernel NULL pointer dereference on read at 0x00000000
[ 20.530183] Faulting instruction address: 0xc0000000000df330
cpu 0x33: Vector: 380 (Data SLB Access) at [c000000c6d19f700]
pc: c0000000000df330: memset+0x68/0x104
lr: c00000000009f6d8: hash__pmdp_huge_get_and_clear+0xe8/0x1b0
sp: c000000c6d19f990
msr: 8000000002009033
dar: 0
current = 0xc000000c6d177480
paca = 0xc00000001ec4f400 irqmask: 0x03 irq_happened: 0x01
pid = 1, comm = swapper/0
[link register ] c00000000009f6d8 hash__pmdp_huge_get_and_clear+0xe8/0x1b0
[c000000c6d19f990] c00000000009f748 hash__pmdp_huge_get_and_clear+0x158/0x1b0 (unreliable)
[c000000c6d19fa10] c0000000019ebf30 pmd_advanced_tests+0x1f0/0x378
[c000000c6d19fab0] c0000000019ed088 debug_vm_pgtable+0x79c/0x1244
[c000000c6d19fba0] c0000000000116ec do_one_initcall+0xac/0x5f0
[c000000c6d19fc80] c0000000019a4fac kernel_init_freeable+0x4dc/0x5a4
[c000000c6d19fdb0] c000000000012474 kernel_init+0x24/0x160
[c000000c6d19fe20] c00000000000cbd0 ret_from_kernel_thread+0x5c/0x6c
This patch (of 13):
With the hash page table, the kernel should not use pmd_clear for clearing
huge pte entries. Add a DEBUG_VM WARN to catch the wrong usage.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lkml.kernel.org/r/20200902114222.181353-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20200902114222.181353-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Ganesh Goudar
|
8d0e210127 |
powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash
Use of nmi_enter/exit in real mode handler causes the kernel to panic
and reboot on injecting SLB mutihit on pseries machine running in hash
MMU mode, because these calls try to accesses memory outside RMO
region in real mode handler where translation is disabled.
Add check to not to use these calls on pseries machine running in hash
MMU mode.
Fixes:
|
|
|
Aneesh Kumar K.V
|
d4263b12a1 |
powerpc/opal_elog: Handle multiple writes to ack attribute
Even though we use self removing sysfs helper, we still need to make sure we do the final kobject delete conditionally. sysfs_remove_file_self() will handle parallel calls to remove the sysfs attribute file and returns true only in the caller that removed the attribute file. The other parallel callers are returned false. Do the final kobject delete checking the return value of sysfs_remove_file_self(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201014064813.109515-1-aneesh.kumar@linux.ibm.com |
|
|
Linus Torvalds
|
9ff9b0d392 |
networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. Allow more than 255 IPv4 multicast interfaces. Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. Allow more calls to same peer in RxRPC. Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. Add TC actions for implementing MPLS L2 VPNs. Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. Support sleepable BPF programs, initially targeting LSM and tracing. Add bpf_d_path() helper for returning full path for given 'struct path'. Make bpf_tail_call compatible with bpf-to-bpf calls. Allow BPF programs to call map_update_elem on sockmaps. Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). Support listing and getting information about bpf_links via the bpf syscall. Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. Add XDP support for Intel's igb driver. Support offloading TC flower classification and filtering rules to mscc_ocelot switches. Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc= =bc1U -----END PGP SIGNATURE----- Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ... |
|
|
Linus Torvalds
|
5a32c3413d |
dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
|
|
Qian Cai
|
ffd0b25ca0 |
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
This reverts commit
|
|
|
Jason A. Donenfeld
|
e6037a753e |
powerpc32: don't adjust unmoved stack pointer in csum_partial_copy_generic() epilogue
A recent change to the checksum code removed usage of some extra
arguments, alongside with storage on the stack for those, and the stack
pointer no longer needed to be adjusted in the function prologue.
But a left over subtraction wasn't removed in the function epilogue,
causing the function to return with the stack pointer moved 16 bytes
away from where it should have. This corrupted local state and lead to
weird crashes.
This simply removes the leftover instruction from the epilogue.
Fixes:
|
|
|
Linus Torvalds
|
d5660df4a5 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ... |
|
|
Mike Rapoport
|
b10d6bca87 |
arch, drivers: replace for_each_membock() with for_each_mem_range()
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));
/* do something with start and end */
}
Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.
[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Mike Rapoport
|
c9118e6c37 |
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
/* do something with start_pfn and end_pfn */
}
Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Mike Rapoport
|
6e245ad4a1 |
memblock: reduce number of parameters in for_each_mem_range()
Currently for_each_mem_range() and for_each_mem_range_rev() iterators are the most generic way to traverse memblock regions. As such, they have 8 parameters and they are hardly convenient to users. Most users choose to utilize one of their wrappers and the only user that actually needs most of the parameters is memblock itself. To avoid yet another naming for memblock iterators, rename the existing for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new for_each_mem_range[_rev]() wrappers with only index, start and end parameters. The new wrapper nicely fits into init_unavailable_mem() and will be used in upcoming changes to simplify memblock traversals. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |