There are quite a few places where instructions are printed, this is
done using a '%x' format specifier. With the introduction of prefixed
instructions, this does not work well. Currently in these places,
ppc_inst_val() is used for the value for %x so only the first word of
prefixed instructions are printed.
When the instructions are word instructions, only a single word should
be printed. For prefixed instructions both the prefix and suffix should
be printed. To accommodate both of these situations, instead of a '%x'
specifier use '%s' and introduce a helper, __ppc_inst_as_str() which
returns a char *. The char * __ppc_inst_as_str() returns is buffer that
is passed to it by the caller.
It is cumbersome to require every caller of __ppc_inst_as_str() to now
declare a buffer. To make it more convenient to use __ppc_inst_as_str(),
wrap it in a macro that uses a compound statement to allocate a buffer
on the caller's stack before calling it.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Drop 0x prefix to match most existings uses, especially xmon]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-1-jniethe5@gmail.com
Add support for the scv instruction on POWER9 and later CPUs.
For now this implements the zeroth scv vector 'scv 0', as identical to
'sc' system calls, with the exception that LR is not preserved, nor
are volatile CR registers, and error is not indicated with CR0[SO],
but by returning a negative errno.
rfscv is implemented to return from scv type system calls. It can not
be used to return from sc system calls because those are defined to
preserve LR.
getpid syscall throughput on POWER9 is improved by 26% (428 to 318
cycles), largely due to reducing mtmsr and mtspr.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix ppc64e build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
The scv instruction causes an interrupt which can enter the kernel with
MSR[EE]=1, thus allowing interrupts to hit at any time. These must not
be taken as normal interrupts, because they come from MSR[PR]=0 context,
and yet the kernel stack is not yet set up and r13 is not set to the
PACA).
Treat this as a soft-masked interrupt regardless of the soft masked
state. This does not affect behaviour yet, because currently all
interrupts are taken with MSR[EE]=0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-2-npiggin@gmail.com
Add Power10 feature function to DT CPU features, along with a Power10
specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and
cpu_features. This will enable performance monitoring unit (PMU) for
Power10 in CPU features with "performance-monitor-power10".
For Power ISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording
Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for Power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of
these new SPRs, updates the struct thread_struct to include these new
SPRs, include MMCR3 in struct mmcr_regs. This is needed to support
programming of MMCR3 SPR during event_enable/disable. Patch also adds
the sysfs support for the MMCR3 SPR along with SPRN_ macros for these
new pmu SPRs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Rename to PPMU_ARCH_31 as noted by jpn]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Fix MMCRA/MMCR2 uapi breakage as noted by paulus]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-3-git-send-email-atrajeev@linux.vnet.ibm.com
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.
Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.
Before commit: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.
This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.
MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
Introduce notification chain which lets us know about uncorrected memory
errors(UE). This would help prospective users in pmem or nvdimm subsystem
to track bad blocks for better handling of persistent memory allocations.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-1-santosh@fossix.org
When '029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")'
made GTSE an MMU feature, it was enabled by default in
powerpc-cpu-features but was missed in pa-features. This causes random
memory corruption during boot of PowerNV kernels where
CONFIG_PPC_DT_CPU_FTRS isn't enabled.
Fixes: 029ab30b4c ("powerpc/mm: Enable radix GTSE only if supported.")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[mpe: Unwrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the DMA API bypass mechanism for direct window mappings. This uses
common code and speed up the direct mapping case by avoiding indirect
calls just when not using dma ops at all. It also fixes a problem where
the sync_* methods were using the bypass check for DMA allocations, but
those are part of the streaming ops.
Note that this patch loses the DMA_ATTR_WEAK_ORDERING override, which
has never been well defined, as is only used by a few drivers, which
IIRC never showed up in the typical Cell blade setups that are affected
by the ordering workaround.
Fixes: efd176a04b ("powerpc/pseries/dma: Allow SWIOTLB")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The device-tree properties to check secure and trusted boot state are
different for guests (pseries) compared to baremetal (powernv).
This patch updates the existing is_ppc_secureboot_enabled() and
is_ppc_trustedboot_enabled() functions to add support for pseries.
For pseries the secureboot and trustedboot state are exposed via
device-tree properties /ibm,secure-boot and /ibm,trusted-boot.
The values of ibm,secure-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled in Log-only mode. This patch interprets this value as
disabled, since audit mode is currently not supported for
Linux.
2 - Enabled and enforced.
3-9 - Enabled and enforcing; requirements are at the discretion of
the operating system.
The values of ibm,trusted-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
[mpe: Drop machdep.h inclusion, tweak change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594813921-12425-1-git-send-email-nayna@linux.ibm.com
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes: 18ad51dd34 ("powerpc: Add VDSO version of getcpu")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org
When we enter into fadump crash path via system reset we fail to update
the pstore.
On the system reset path we first update the pstore then we go for fadump
crash. But the problem here is when all the CPUs try to get the pstore
lock to initiate the pstore write, only one CPUs will acquire the lock
and proceed with the pstore write. Since it in NMI context CPUs that fail
to get lock do not wait for their turn to write to the pstore and simply
proceed with the next operation which is fadump crash. One of the CPU who
proceeded with fadump crash path triggers the crash and does not wait for
the CPU who gets the pstore lock to complete the pstore update.
Timeline diagram to depicts the sequence of events that leads to an
unsuccessful pstore update when we hit fadump crash path via system reset.
1 2 3 ... n CPU Threads
| | | |
| | | |
Reached to -->|--->|---->| ----------->|
system reset | | | |
path | | | |
| | | |
Try to -->|--->|---->|------------>|
acquire the | | | |
pstore lock | | | |
| | | |
| | | |
Got the -->| +->| | |<-+
pstore lock | | | | | |--> Didn't get the
| --------------------------+ lock and moving
| | | | ahead on fadump
| | | | crash path
| | | |
Begins the -->| | | |
process to | | | |<-- Got the chance to
update the | | | | trigger the crash
pstore | -> | | ... <- |
| | | | | |
| | | | | |<-- Triggers the
| | | | | | crash
| | | | | | ^
| | | | | | |
Writing to -->| | | | | | |
pstore | | | | | | |
| | |
^ |__________________| |
| CPU Relax |
| |
+-----------------------------------------+
|
v
Race: crash triggered before pstore
update completes
To avoid this race condition a barrier is added on crash_fadump path, it
prevents the CPU to trigger the crash until all the online CPUs completes
their task.
A barrier is added to make sure all the secondary CPUs hit the
crash_fadump function before we initiates the crash. A timeout is kept to
ensure the primary CPU (one who initiates the crash) do not wait for
secondary CPUs indefinitely.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713052435.183750-1-sourabhjain@linux.ibm.com
prrn_is_enabled() always returns false/0, so handle_rtas_event() can
be simplified and some dead code can be removed. Use machine_is()
instead of #ifdef to run this code only on pseries, and add an
informational ratelimited message that we are ignoring the
events. PRRN events are relatively rare in normal operation and
usually arise from operator-initiated actions such as a DPO (Dynamic
Platform Optimizer) run.
Eventually we do want to consume these events and update the device
tree, but that needs more care to be safe vs LPM and DLPAR.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-13-nathanl@linux.ibm.com
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050f ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com
If both count cache and link stack are to be flushed, and can be flushed
with the special bcctr, patch that in directly to the flush/branch nop
site.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-7-npiggin@gmail.com
Branch cache flushing code patching has inter-dependencies on both the
link stack and the count cache flushing state.
To make the code clearer and to separate the link stack and count
cache handling, split the "toggle" (setting up variables and printing
enable/disable) from the code patching.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Always print something, even if the flush is disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-5-npiggin@gmail.com
Prepare to allow for hardware link stack flushing by using the
none/sw/hw type, same as the count cache state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-3-npiggin@gmail.com
The count cache flush mostly refers to both count cache and link stack
flushing. As a first step to untangling these a bit, re-name the bits
that apply to both.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-2-npiggin@gmail.com
When a FP/VEC/VSX unavailable fault loads registers and enables the
facility in the MSR, re-set the lazy restore counters to 1 rather
than incrementing them so every fault gets the same number of
restores before the next fault.
This probably shouldn't be a practical change because if a lazy counter
was non-zero then it should have been restored and would not cause a
fault when userspace tries to access it. However the code and comment
implies otherwise so that's misleading and unnecessary.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-3-npiggin@gmail.com
Before returning to user, if there are missing FP/VEC/VSX bits from the
user MSR then those registers had been saved and must be restored again
before use. restore_math will decide whether to restore immediately, or
skip the restore and let fp/vec/vsx unavailable faults demand load the
registers.
Each time restore_math restores one of the FP/VSX or VEC register sets
is loaded, an 8-bit counter is incremented (load_fp and load_vec). When
these wrap to zero, restore_math no longer restores that register set
until after they are next demand faulted.
It's quite usual for those counters to have different values, so if one
wraps to zero and restore_math no longer restores its registers or user
MSR bit but the other is not zero yet does not need to be restored
(because the kernel is not frequently using the FPU), then restore_math
will be called and it will also not return in the early exit check.
This causes msr_check_and_set to test and set the MSR at every kernel
exit despite having no work to do.
This can cause workloads (e.g., a NULL syscall microbenchmark) to run
fast for a time while both counters are non-zero, then slow down when
one of the counters reaches zero, then speed up again after the second
counter reaches zero. The cost is significant, about 10% slowdown on a
NULL syscall benchmark, and the jittery behaviour is very undesirable.
Fix this by having restore_math test all conditions first, and only
update MSR if we will be loading registers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-2-npiggin@gmail.com
The TM test in restore_math added by commit dc16b553c9 ("powerpc:
Always restore FPU/VEC/VSX if hardware transactional memory in use") is
no longer necessary after commit a8318c13e7 ("powerpc/tm: Fix
restoring FP/VMX facility incorrectly on interrupts"), which removed
the cases where restore_math has to restore if TM is active.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-1-npiggin@gmail.com
Make GTSE an MMU feature and enable it by default for radix.
However for guest, conditionally enable it if hypervisor supports
it via OV5 vector. Let prom_init ask for radix GTSE only if the
support exists.
Having GTSE as an MMU feature will make it easy to enable radix
without GTSE. Currently radix assumes GTSE is enabled by default.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-2-bharata@linux.ibm.com
save_general_regs() which does special handling when i == PT_SOFTE.
Rewrite it to minimise the specific part, especially the __put_user()
and associated error handling is the same so make it common.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use a regular if rather than ternary operator]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/47a38df46cae5a5a88a558a64d71f75e9c4d9950.1594125164.git.christophe.leroy@csgroup.eu
Since commit ("1bd79336a426 powerpc: Fix various
syscall/signal/swapcontext bugs"), getting save_general_regs() called
without FULL_REGS() is very unlikely and generates a warning.
The 32-bit version of save_general_regs() doesn't take care of it
at all and copies all registers anyway since that commit.
Moreover, commit 965dd3ad30 ("powerpc/64/syscall: Remove
non-volatile GPR save optimisation") is another reason why it would
never happen.
So the same with 64-bit, don't worry about FULL_REGS() and copy
all registers all the time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/173de3b659fa3a5f126a0eb170522cccd909950f.1594125164.git.christophe.leroy@csgroup.eu
Returning from an interrupt or syscall to a signal handler currently
begins execution directly at the handler's entry point, with LR set to
the address of the sigreturn trampoline. When the signal handler
function returns, it runs the trampoline. It looks like this:
# interrupt at user address xyz
# kernel stuff... signal is raised
rfid
# void handler(int sig)
addis 2,12,.TOC.-.LCF0@ha
addi 2,2,.TOC.-.LCF0@l
mflr 0
std 0,16(1)
stdu 1,-96(1)
# handler stuff
ld 0,16(1)
mtlr 0
blr
# __kernel_sigtramp_rt64
addi r1,r1,__SIGNAL_FRAMESIZE
li r0,__NR_rt_sigreturn
sc
# kernel executes rt_sigreturn
rfid
# back to user address xyz
Note the blr with no matching bl. This can corrupt the return
predictor.
Solve this by instead resuming execution at the signal trampoline
which then calls the signal handler. qtrace-tools link_stack checker
confirms the entire user/kernel/vdso cycle is balanced after this
patch, whereas it's not upstream.
Alan confirms the dwarf unwind info still looks good. gdb still
recognises the signal frame and can step into parent frames if it
break inside a signal handler.
Performance is pretty noisy, not a very significant change on a POWER9
here, but branch misses are consistently a lot lower on a
microbenchmark:
Performance counter stats for './signal':
13,085.72 msec task-clock # 1.000 CPUs utilized
45,024,760,101 cycles # 3.441 GHz
65,102,895,542 instructions # 1.45 insn per cycle
11,271,673,787 branches # 861.372 M/sec
59,468,979 branch-misses # 0.53% of all branches
12,989.09 msec task-clock # 1.000 CPUs utilized
44,692,719,559 cycles # 3.441 GHz
65,109,984,964 instructions # 1.46 insn per cycle
11,282,136,057 branches # 868.585 M/sec
39,786,942 branch-misses # 0.35% of all branches
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200511101952.1463138-1-npiggin@gmail.com
Unlike drivers/base/cacheinfo, powerpc cacheinfo code is not exposing
shared_cpu_list under /sys/devices/system/cpu/cpu<n>/cache/index<m>
Add shared_cpu_list to per cpu per index directory to maintain parity
with x86. Some scripts (example: mmtests
https://github.com/gormanm/mmtests) seem to be looking for
shared_cpu_list instead of shared_cpu_map.
Before this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets size ways_of_associativity
level shared_cpu_map type
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
After this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets shared_cpu_map type
level shared_cpu_list size ways_of_associativity
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_list
0-7
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-4-srikar@linux.vnet.ibm.com
In anticipation of implementing shared_cpu_list, move code under
shared_cpu_map_show() to a common function.
No functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-3-srikar@linux.vnet.ibm.com
Tejun Heo had modified shared_cpu_map_show() to use scnprintf instead
of cpumap_print during support for *pb[l] format. Refer commit
0c118b7bd0 ("powerpc: use %*pb[l] to print bitmaps including
cpumasks and nodemasks").
cpumap_print_to_pagebuf() is a standard function to print cpumap. With
commit 9cf79d115f ("bitmap: remove explicit newline handling using
scnprintf format string"), there is no need to print explicit newline
and trailing null character. cpumap_print_to_pagebuf() internally uses
scnprintf(). Hence replace scnprintf() with cpumap_print_to_pagebuf().
Note: shared_cpu_map_show() in drivers/base/cacheinfo.c already uses
cpumap_print_to_pagebuf().
Before this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
(Notice the extra blank line).
After this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-2-srikar@linux.vnet.ibm.com
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
In order to use <asm/percpu.h> in lockdep.h, we need to make sure
asm/percpu.h does not itself depend on lockdep.
The below seems to make that so and builds powerpc64-defconfig +
PROVE_LOCKING.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
https://lkml.kernel.org/r/20200623083721.336906073@infradead.org
A typo caused the interrupt handler to branch immediately to the
common "unknown interrupt" handler and skip the special case test for
denormal cause.
This does not affect KVM softpatch handling (e.g., for POWER9 TM
assist) because the KVM test was moved to common code by commit
9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
just before this bug was introduced.
Fixes: 3f7fbd97d0 ("powerpc/64s/exception: Clean up SRR specifiers")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
[mpe: Split selftest into a separate patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
blrl is not recommended to use as an indirect function call, as it may
corrupt the link stack predictor.
This is not a performance critical path but this should be fixed for
consistency.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611121119.1015740-1-npiggin@gmail.com
One fix for the interrupt rework we did last release which broke KVM-PR.
Three commits fixing some fallout from the READ_ONCE() changes interacting badly
with our 8xx 16K pages support, which uses a pte_t that is a structure of 4
actual PTEs.
A cleanup of the 8xx pte_update() to use the newly added pmd_off().
A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled.
A minor fix for the SPU syscall generation.
Thanks to:
Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=qws5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
Now that we've renamed probe_kernel_address() to get_kernel_nofault()
and made it look and behave more in line with get_user(), some of the
subtle type behavior differences end up being more obvious and possibly
dangerous.
When you do
get_user(val, user_ptr);
the type of the access comes from the "user_ptr" part, and the above
basically acts as
val = *user_ptr;
by design (except, of course, for the fact that the actual dereference
is done with a user access).
Note how in the above case, the type of the end result comes from the
pointer argument, and then the value is cast to the type of 'val' as
part of the assignment.
So the type of the pointer is ultimately the more important type both
for the access itself.
But 'get_kernel_nofault()' may now _look_ similar, but it behaves very
differently. When you do
get_kernel_nofault(val, kernel_ptr);
it behaves like
val = *(typeof(val) *)kernel_ptr;
except, of course, for the fact that the actual dereference is done with
exception handling so that a faulting access is suppressed and returned
as the error code.
But note how different the casting behavior of the two superficially
similar accesses are: one does the actual access in the size of the type
the pointer points to, while the other does the access in the size of
the target, and ignores the pointer type entirely.
Actually changing get_kernel_nofault() to act like get_user() is almost
certainly the right thing to do eventually, but in the meantime this
patch adds logit to at least verify that the pointer type is compatible
with the type of the result.
In many cases, this involves just casting the pointer to 'void *' to
make it obvious that the type of the pointer is not the important part.
It's not how 'get_user()' acts, but at least the behavioral difference
is now obvious and explicit.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The CTR register reload in the KVM interrupt path used the wrong save
area for SLB (and NMI) interrupts.
Fixes: 9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200615061247.1310763-1-npiggin@gmail.com
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes: 4dd7554a64 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-27-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
These helpers are only used for remapping the ISA I/O base. Replace the
mapping side with a remap_isa_range helper in isa-bridge.c that hard codes
all the known arguments, and just remove __iounmap_at in favour of open
coding it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-8-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Factor code shared between pci_64 and electra_cf into a ioremap_pbh helper
that follows the normal ioremap semantics, and returns a useful __iomem
pointer. Note that it opencodes __ioremap_at as we know from the callers
the slab is available. Switch pci_64 to also store the result as __iomem
pointer, and unmap the result using iounmap instead of force casting and
using vmalloc APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PVR value of 0x0F000006 means we are arch v3.1 compliant (i.e.
POWER10). This is used by phyp and kvm when booting as a pseries guest
to detect the presence of new P10 features and to enable the
appropriate hwcap and facility bits.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[mpe: Fall through to __init_FSCR rather than duplicating it, drop
hack to set current->thread.fscr now that is handled elsewhere.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-8-alistair@popple.id.au
Matrix multiple assist (MMA) is a new feature added to ISAv3.1 and
POWER10. Support on powernv can be selected via a firmware CPU device
tree feature which enables it via a PCR bit.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-7-alistair@popple.id.au
Prefix instructions have their own FSCR bit which needs to be enabled
via a CPU feature. The kernel will save the FSCR for problem state but
it needs to be enabled initially.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-6-alistair@popple.id.au
On powernv hardware support for ISAv3.1 is advertised via a cpu feature
bit in the device tree. This patch enables the associated HWCAP bit if
the device tree indicates ISAv3.1 is available.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-4-alistair@popple.id.au
At boot the FSCR is initialised via one of two paths. On most systems
it's set to a hard coded value in __init_FSCR().
On newer skiboot systems we use the device tree CPU features binding,
where firmware can tell Linux what bits to set in FSCR (and HFSCR).
In both cases the value that's configured at boot is not propagated
into the init_task.thread.fscr value prior to the initial fork of init
(pid 1), which means the value is not used by any processes other than
swapper (the idle task).
For the __init_FSCR() case this is OK, because the value in
init_task.thread.fscr is initialised to something sensible. However it
does mean that the value set in __init_FSCR() is not used other than
for swapper, which is odd and confusing.
The bigger problem is for the device tree CPU features case it
prevents firmware from setting (or clearing) FSCR bits for use by user
space. This means all existing kernels can not have features
enabled/disabled by firmware if those features require
setting/clearing FSCR bits.
We can handle both cases by saving the FSCR value into
init_task.thread.fscr after we have initialised it at boot. This fixes
the bug for device tree CPU features, and will allow us to simplify
the initialisation for the __init_FSCR() case in a future patch.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au
The device tree CPU features binding includes FSCR bit numbers which
Linux is instructed to set by firmware.
Whether that's a good idea or not, in the case of the DSCR the Linux
implementation has a hard requirement that the FSCR_DSCR bit not be
set by default. We use it to track when a process reads/writes to
DSCR, so it must be clear to begin with.
So if firmware tells us to set FSCR_DSCR we must ignore it.
Currently this does not cause a bug in our DSCR handling because the
value of FSCR that the device tree CPU features code establishes is
only used by swapper. All other tasks use the value hard coded in
init_task.thread.fscr.
However we'd like to fix that in a future commit, at which point this
will become necessary.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-2-mpe@ellerman.id.au
__init_FSCR() was added originally in commit 2468dcf641 ("powerpc:
Add support for context switching the TAR register") (Feb 2013), and
only set FSCR_TAR.
At that point FSCR (Facility Status and Control Register) was not
context switched, so the setting was permanent after boot.
Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit
54c9b2253d ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again
that was permanent after boot.
Then commit 2517617e0d ("powerpc: Fix context switch DSCR on
POWER8") (Aug 2013) added a limited context switch of FSCR, just the
FSCR_DSCR bit was context switched based on thread.dscr_inherit. That
commit said "This clears the H/FSCR DSCR bit initially", but it
didn't, it left the initialisation of FSCR_DSCR in __init_FSCR().
However the initial context switch from init_task to pid 1 would clear
FSCR_DSCR because thread.dscr_inherit was 0.
That commit also introduced the requirement that FSCR_DSCR be clear
for user processes, so that we can take the facility unavailable
interrupt in order to manage dscr_inherit.
Then in commit 152d523e63 ("powerpc: Create context switch helpers
save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to
thread_struct. However it still wasn't fully context switched, we just
took the existing value and set FSCR_DSCR if the new thread had
dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR |
FSCR_TAR, but that value was not propagated into the thread_struct, so
the initial context switch set FSCR_DSCR back to 0.
Finally commit b57bd2de8c ("powerpc: Improve FSCR init and context
switching") (Jun 2016) added a full context switch of the FSCR, and
added an initialisation of init_task.thread.fscr to FSCR_TAR |
FSCR_EBB, but omitted FSCR_DSCR.
The end result is that swapper runs with FSCR_DSCR set because of the
initialisation in __init_FSCR(), but no other processes do, they use
the value from init_task.thread.fscr.
Having FSCR_DSCR set for swapper allows it to access SPR 3 from
userspace, but swapper never runs userspace, so it has no useful
effect. It's also confusing to have the value initialised in two
places to two different values.
So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the
point where there's a single value of FSCR, even if it's still set in
two places.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
Since commit c55d7b5e64 ("powerpc: Remove STRICT_KERNEL_RWX
incompatibility with RELOCATABLE"), powerpc kernels with
-mprofile-kernel can crash in certain scenarios with a trace like below:
BUG: Unable to handle kernel instruction fetch (NULL pointer?)
Faulting instruction address: 0x00000000
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=256 DEBUG_PAGEALLOC NUMA PowerNV
<snip>
NIP [0000000000000000] 0x0
LR [c0080000102c0048] ext4_iomap_end+0x8/0x30 [ext4]
Call Trace:
iomap_apply+0x20c/0x920 (unreliable)
iomap_bmap+0xfc/0x160
ext4_bmap+0xa4/0x180 [ext4]
bmap+0x4c/0x80
jbd2_journal_init_inode+0x44/0x1a0 [jbd2]
ext4_load_journal+0x440/0x860 [ext4]
ext4_fill_super+0x342c/0x3ab0 [ext4]
mount_bdev+0x25c/0x290
ext4_mount+0x28/0x50 [ext4]
legacy_get_tree+0x4c/0xb0
vfs_get_tree+0x4c/0x130
do_mount+0xa18/0xc50
sys_mount+0x158/0x180
system_call+0x5c/0x68
The NIP points to NULL, or a random location (data even), while the LR
always points to the LEP of a function (with an offset of 8), indicating
that something went wrong with ftrace. However, ftrace is not
necessarily active when such crashes occur.
The kernel OOPS sometimes follows a warning from ftrace indicating that
some module functions could not be patched with a nop. Other times, if a
module is loaded early during boot, instruction patching can fail due to
a separate bug, but the error is not reported due to missing error
reporting.
In all the above cases when instruction patching fails, ftrace will be
disabled but certain kernel module functions will be left with default
calls to _mcount(). This is not a problem with ELFv1. However, with
-mprofile-kernel, the default stub is problematic since it depends on a
valid module TOC in r2. If the kernel (or a different module) calls into
a function that does not use the TOC, the function won't have a prologue
to setup the module TOC. When that function calls into _mcount(), we
will end up in the relocation stub that will use the previous TOC, and
end up trying to jump into a random location. From the above trace:
iomap_apply+0x20c/0x920 [kernel TOC]
|
V
ext4_iomap_end+0x8/0x30 [no GEP == kernel TOC]
|
V
_mcount() stub
[uses kernel TOC -> random entry]
To address this, let's change over to using the special stub that is
used for ftrace_[regs_]caller() for _mcount(). This ensures that we are
not dependent on a valid module TOC in r2 for default _mcount()
handling.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8affd4298d22099bbd82544fab8185700a6222b1.1587488954.git.naveen.n.rao@linux.vnet.ibm.com
For -mprofile-kernel, we need special handling when generating stubs for
ftrace calls such as _mcount(). To faciliate this, we check if a
R_PPC64_REL24 relocation is for a symbol named "_mcount()" along with
also checking the instruction sequence. The latter is not really
required since "_mcount()" is an exported symbol and kernel modules
cannot use it. As such, drop the additional checking and simplify the
code. This helps unify stub creation for ftrace stubs with
-mprofile-kernel and aids in code reuse.
Also rename is_mprofile_mcount_callsite() to is_mprofile_ftrace_call()
to reflect the checking being done.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7d9c316adfa1fb787ad268bb4691e7e4059ff2d5.1587488954.git.naveen.n.rao@linux.vnet.ibm.com
module_trampoline_target() is only used by ftrace. Move the prototype
within the appropriate #ifdef in the header. Also, move the function
body to the end of module_64.c so as to consolidate all ftrace code in
one place.
No functional changes.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2527351f65c53c5866068ae130dc34c5d4ee8ad9.1587488954.git.naveen.n.rao@linux.vnet.ibm.com
kprobe does not handle events happening in real mode.
The very last part of exception exits cannot support a trap.
Blacklist them from kprobe.
While we are at it, remove exc_exit_start symbol which is not
used to avoid having to blacklist it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/098b0fd3f6299aa1bd692bd576bd7012c84608de.1585670437.git.christophe.leroy@c-s.fr
kprobe does not handle events happening in real mode.
The very last part of syscall cannot support a trap.
Add a symbol syscall_exit_finish to identify that part and
blacklist it from kprobe.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/23eddf49abb03d1359fa0be4206998eb3800f42c.1585670437.git.christophe.leroy@c-s.fr
kprobe does not handle events happening in real mode.
As exception entry points are running with MMU disabled,
blacklist them.
The handling of TLF_NAPPING and TLF_SLEEPING is moved before the
CONFIG_TRACE_IRQFLAGS which contains 'reenable_mmu' because from there
kprobe will be possible as the kernel will run with MMU enabled.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f61ac599855e674ebb592464d0ea32a3ba9c6644.1585670437.git.christophe.leroy@c-s.fr
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
While providing guests, it's desirable to resize it's memory on demand.
By now, it's possible to do so by creating a guest with a small base
memory, hot-plugging all the rest, and using 'movable_node' kernel
command-line parameter, which puts all hot-plugged memory in
ZONE_MOVABLE, allowing it to be removed whenever needed.
But there is an issue regarding guest reboot:
If memory is hot-plugged, and then the guest is rebooted, all hot-plugged
memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal.
It usually prevents this memory to be hot-removed from the guest.
It's possible to use device-tree information to fix that behavior, as
it stores flags for LMB ranges on ibm,dynamic-memory-vN.
It involves marking each memblock with the correct flags as hotpluggable
memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if
'movable_node' is passed.
For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was
proposed and accepted into Power Architecture documentation.
This flag should be:
- true (b=1) if the hypervisor may want to hot-remove it later, and
- false (b=0) if it does not care.
During boot, guest kernel reads the device-tree, early_init_drmem_lmb()
is called for every added LMBs. Here, checking for this new flag and
marking memblocks as hotplugable memory is enough to get the desirable
behavior.
This should cause no change if 'movable_node' parameter is not passed
in kernel command-line.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402195156.626430-1-leonardo@linux.ibm.com
Currently when we boot on a big core system, we get this print:
[ 0.040500] Using small cores at SMT level
This is misleading as we've actually detected big cores.
This patch clears up the print to say we've detect big cores but are
using small cores for scheduling.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200528230731.1235752-1-mikey@neuling.org
If the memory chunk found for reserving memory overshoots the memory
limit imposed, do not proceed with reserving memory. Default behavior
was this until commit 140777a3d8 ("powerpc/fadump: consider reserved
ranges while reserving memory") changed it unwittingly.
Fixes: 140777a3d8 ("powerpc/fadump: consider reserved ranges while reserving memory")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159057266320.22331.6571453892066907320.stgit@hbathini.in.ibm.com
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
logic, instead of the current per debug facility blacklist, use the more generic
.noinstr.text approach, combined with a 'noinstr' marker for functions.
Also add instrumentation_begin()/end() to better manage the exact place in entry
code where instrumentation may be used.
Also add a kprobes blacklist for modules.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=25Vr
-----END PGP SIGNATURE-----
Merge tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kprobes updates from Ingo Molnar:
"Various kprobes updates, mostly centered around cleaning up the
no-instrumentation logic.
Instead of the current per debug facility blacklist, use the more
generic .noinstr.text approach, combined with a 'noinstr' marker for
functions.
Also add instrumentation_begin()/end() to better manage the exact
place in entry code where instrumentation may be used.
And add a kprobes blacklist for modules"
* tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Prevent probes in .noinstr.text section
vmlinux.lds.h: Create section for protection against instrumentation
samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers.
kprobes: Support NOKPROBE_SYMBOL() in modules
kprobes: Support __kprobes blacklist in modules
kprobes: Lock kprobe_mutex while showing kprobe_blacklist
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Similar to the C code change, make the AMR restore conditional on
whether the register has changed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-7-npiggin@gmail.com
The AMR update is made conditional on AMR actually changing, which
should be the less common case on most workloads (though kernel page
faults on uaccess could be frequent, this doesn't significantly slow
down that case).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-4-npiggin@gmail.com
Let's reduce the number of registers used in TLB miss handlers.
We have both r9 and r12 available for any temporary use.
r9 is enough, avoid using r12.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f330e971952abb2645fb9ca4310c0f527e84dcb.1590079969.git.christophe.leroy@csgroup.eu
Commit 1bc54c0311 ("powerpc: rework 4xx PTE access and TLB miss")
reworked 44x PTE access to avoid atomic pte updates, and
left 8xx, 40x and fsl booke with atomic pte updates.
Commit 6cfd8990e2 ("powerpc: rework FSL Book-E PTE access and TLB
miss") removed atomic pte updates on fsl booke.
It went away on 8xx with commit ddfc20a3b9 ("powerpc/8xx: Remove
PTE_ATOMIC_UPDATES").
40x is the last platform setting PTE_ATOMIC_UPDATES.
Rework PTE access and TLB miss to remove PTE_ATOMIC_UPDATES for 40x:
- Always handle DSI as a fault.
- Bail out of TLB miss handler when CONFIG_SWAP is set and
_PAGE_ACCESSED is not set.
- Bail out of ITLB miss handler when _PAGE_EXEC is not set.
- Only set WR bit when both _PAGE_RW and _PAGE_DIRTY are set.
- Remove _PAGE_HWWRITE
- Don't require PTE_ATOMIC_UPDATES anymore
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99a0fcd337ef67088140d1647d75fea026a70413.1590079968.git.christophe.leroy@csgroup.eu
The latest Xilinx design tools called ISE and EDK has been released in
October 2013. New tool doesn't support any PPC405/PPC440 new designs.
These platforms are no longer supported and tested.
PowerPC 405/440 port is orphan from 2013 by
commit cdeb89943b ("MAINTAINERS: Fix incorrect status tag") and
commit 19624236cc ("MAINTAINERS: Update Grant's email address and maintainership")
that's why it is time to remove the support fot these platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
The same complicated sequence for juggling EE, RI, soft mask, and
irq tracing is repeated 3 times, tidy these up into one function.
This differs qiute a bit between sub architectures, so this makes
the ppc32 port cleaner as well.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429062421.1675400-1-npiggin@gmail.com
The code patching code wants to get the value of a struct ppc_inst as
a u64 when the instruction is prefixed, so we can pass the u64 down to
__put_user_asm() and write it with a single store.
The optprobes code wants to load a struct ppc_inst as an immediate
into a register so it is useful to have it as a u64 to use the
existing helper function.
Currently this is a bit awkward because the value differs based on the
CPU endianness, so add a helper to do the conversion.
This fixes the usage in arch_prepare_optimized_kprobe() which was
previously incorrect on big endian.
Fixes: 650b55b707 ("powerpc: Add prefixed instructions to instruction data type")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20200526072630.2487363-1-mpe@ellerman.id.au
In a few places we want to calculate the address of the next
instruction. Previously that was simple, we just added 4 bytes, or if
using a u32 * we incremented that pointer by 1.
But prefixed instructions make it more complicated, we need to advance
by either 4 or 8 bytes depending on the actual instruction. We also
can't do pointer arithmetic using struct ppc_inst, because it is
always 8 bytes in size on 64-bit, even though we might only need to
advance by 4 bytes.
So add a ppc_inst_next() helper which calculates the location of the
next instruction, if the given instruction was located at the given
address. Note the instruction doesn't need to actually be at the
address in memory.
Although it would seem natural for the value to be passed by value,
that makes it too easy to write a loop that will read off the end of a
page, eg:
for (; src < end; src = ppc_inst_next(src, *src),
dest = ppc_inst_next(dest, *dest))
As noticed by Christophe and Jordan, if end is the exact end of a
page, and the next page is not mapped, this will fault, because *dest
will read 8 bytes, 4 bytes into the next page.
So value is passed by reference, so the helper can be careful to use
ppc_inst_read() on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20200522133318.1681406-1-mpe@ellerman.id.au
Merge our fixes branch from this cycle. It contains several important
fixes we need in next for testing purposes, and also some that will
conflict with upcoming changes.
Map linear memory space with 512k and 8M pages whenever
possible.
Three mappings are performed:
- One for kernel text
- One for RO data
- One for the rest
Separating the mappings is done to be able to update the
protection later when using STRICT_KERNEL_RWX.
The ITLB miss handler now need to also handle huge TLBs
unless kernel text in pinned.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c44f0ab5510474f25123d904cd1f4e5c6aa3c1ac.1589866984.git.christophe.leroy@csgroup.eu
Now that linear and IMMR dedicated TLB handling is gone, kernel
boundary address comparison is similar in ITLB miss handler and
in DTLB miss handler.
Create a macro named compare_to_kernel_boundary.
When TASK_SIZE is strictly below 0x80000000 and PAGE_OFFSET is
above 0x80000000, it is enough to compare to 0x8000000, and this
can be done with a single instruction.
Using not. instruction, we get to use 'blt' conditional branch as
when doing a regular comparison:
0x00000000 <= addr <= 0x7fffffff ==>
0xffffffff >= NOT(addr) >= 0x80000000
The above test corresponds to a 'blt'
Otherwise, do a regular comparison using two instructions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6312575d06a8813105e6564a3b12e1d373aa1b2f.1589866984.git.christophe.leroy@csgroup.eu
Up to now, linear and IMMR mappings are managed via huge TLB entries
through specific code directly in TLB miss handlers. This implies
some patching of the TLB miss handlers at startup, and a lot of
dedicated code.
Remove all this specific dedicated code.
For now we are back to normal handling via standard 4k pages. In the
next patches, linear memory mapping and IMMR mapping will be managed
through huge pages.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/221b7e3ead80a5969629938c023f8cfe45fdd2fb.1589866984.git.christophe.leroy@csgroup.eu
At startup, map 32 Mbytes of memory through 4 pages of 8M,
and PIN them inconditionnaly. They need to be pinned because
KASAN is using page tables early and the TLBs might be
dynamically replaced otherwise.
Remove RSV4I flag after installing mappings unless
CONFIG_PIN_TLB_XXXX is selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b27c5767d18053b59f7eefddc189fcc3acf7b9c2.1589866984.git.christophe.leroy@csgroup.eu
Only early debug requires IMMR to be mapped early.
No need to set it up and pin it in assembly. Map it
through page tables at udbg init when necessary.
If CONFIG_PIN_TLB_IMMR is selected, pin it once we
don't need the 32 Mb pinned RAM anymore.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/13c1e8539fdf363d3146f4884e5c3c76c6c308b5.1589866984.git.christophe.leroy@csgroup.eu
Pinned TLBs cannot be modified when the MMU is enabled.
Create a function to rewrite the pinned TLB entries with MMU off.
To set pinned TLB, we have to turn off MMU, disable pinning,
do a TLB flush (Either with tlbie and tlbia) then reprogam
the TLB entries, enable pinning and turn on MMU.
If using tlbie, it cleared entries in both instruction and data
TLB regardless whether pinning is disabled or not.
If using tlbia, it clears all entries of the TLB which has
disabled pinning.
To make it easy, just clear all entries in both TLBs, and
reprogram them.
The function takes two arguments, the top of the memory to
consider and whether data is RO under _sinittext.
When DEBUG_PAGEALLOC is set, the top is the end of kernel rodata.
Otherwise, that's the top of physical RAM.
Everything below _sinittext is set RX, over _sinittext that's RW.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c17806014bb1c06513ad1e1d510faea31984b177.1589866984.git.christophe.leroy@csgroup.eu
At the time being, 512k huge pages are handled through hugepd page
tables. The PMD entry is flagged as a hugepd pointer and it
means that only 512k hugepages can be managed in that 4M block.
However, the hugepd table has the same size as a normal page
table, and 512k entries can therefore be nested with normal pages.
On the 8xx, TLB loading is performed by software and allthough the
page tables are organised to match the L1 and L2 level defined by
the HW, all TLB entries have both L1 and L2 independent entries.
It means that even if two TLB entries are associated with the same
PMD entry, they can be loaded with different values in L1 part.
The L1 entry contains the page size (PS field):
- 00 for 4k and 16 pages
- 01 for 512k pages
- 11 for 8M pages
By adding a flag for hugepages in the PTE (_PAGE_HUGE) and copying it
into the lower bit of PS, we can then manage 512k pages with normal
page tables:
- PMD entry has PS=11 for 8M pages
- PMD entry has PS=00 for other pages.
As a PMD entry covers 4M areas, a PMD will either point to a hugepd
table having a single entry to an 8M page, or the PMD will point to
a standard page table which will have either entries to 4k or 16k or
512k pages. For 512k pages, as the L1 entry will not know it is a
512k page before the PTE is read, there will be 128 entries in the
PTE as if it was 4k pages. But when loading the TLB, it will be
flagged as a 512k page.
Note that we can't use pmd_ptr() in asm/nohash/32/pgtable.h because
it is not defined yet.
In ITLB miss, we keep the possibility to opt it out as when kernel
text is pinned and no user hugepages are used, we can save several
instruction by not using r11.
In DTLB miss, that's just one instruction so it's not worth bothering
with it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/002819e8e166bf81d24b24782d98de7c40905d8f.1589866984.git.christophe.leroy@csgroup.eu
Prepare ITLB handler to handle _PAGE_HUGE when CONFIG_HUGETLBFS
is enabled. This means that the L1 entry has to be kept in r11
until L2 entry is read, in order to insert _PAGE_HUGE into it.
Also move pgd_offset helpers before pte_update() as they
will be needed there in next patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21fd1de8fba781bededa9474a5a9374aefb1f849.1589866984.git.christophe.leroy@csgroup.eu
CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode
for debuging hardware. But nobody will design new boards with 8xx now.
All 8xx platforms select it, so make it the default and remove
the option.
Also remove the Mx_RESETVAL values which are pretty useless and hide
the real value while reading code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu
Allocate static page tables for the fixmap area. This allows
setting mappings through page tables before memblock is ready.
That's needed to use early_ioremap() early and to use standard
page mappings with fixmap.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4f4b1412d34de6801b8e925cb88fc69d056ff536.1589866984.git.christophe.leroy@csgroup.eu
Commit 702f098052 ("powerpc/64s/exception: Remove lite interrupt
return") changed the interrupt return path to not restore non-volatile
registers by default, and explicitly restore them in paths where it is
required.
But it missed that the facility unavailable exception can sometimes
modify user registers, ie. when it does emulation of move from DSCR.
This is seen as a failure of the dscr_sysfs_thread_test:
test: dscr_sysfs_thread_test
[cpu 0] User DSCR should be 1 but is 0
failure: dscr_sysfs_thread_test
So restore non-volatile GPRs after facility unavailable exceptions.
Currently the hypervisor facility unavailable exception is also wired
up to call facility_unavailable_exception().
In practice we should never take a hypervisor facility unavailable
exception for the DSCR. On older bare metal systems we set HFSCR_DSCR
unconditionally in __init_HFSCR, or on newer systems it should be
enabled via the "data-stream-control-register" device tree CPU
feature.
Even if it's not, since commit f3c99f97a3 ("KVM: PPC: Book3S HV:
Don't access HFSCR, LPIDR or LPCR when running nested"), the KVM code
has unconditionally set HFSCR_DSCR when running guests.
So we should only get a hypervisor facility unavailable for the DSCR
if skiboot has disabled the "data-stream-control-register" feature,
and we are somehow in guest context but not via KVM.
Given all that, it should be unnecessary to add a restore of
non-volatile GPRs after the hypervisor facility exception, because we
never expect to hit that path. But equally we may as well add the
restore, because we never expect to hit that path, and if we ever did,
at least we would correctly restore the registers to their post
emulation state.
In future we can split the non-HV and HV facility unavailable handling
so that there is no emulation in the HV handler, and then remove the
restore for the HV case.
Fixes: 702f098052 ("powerpc/64s/exception: Remove lite interrupt return")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200526061808.2472279-1-mpe@ellerman.id.au
This reverts commit 697ece78f8.
The implementation of SWAP on powerpc requires page protection
bits to not be one of the least significant PTE bits.
Until the SWAP implementation is changed and this requirement voids,
we have to keep at least _PAGE_RW outside of the 3 last bits.
For now, revert to previous PTE bits order. A further rework
may come later.
Fixes: 697ece78f8 ("powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits.")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b34706f8de87f84d135abb5f3ede6b6f16fb1f41.1589969799.git.christophe.leroy@csgroup.eu
Since there are already a number of sites (ARM64, PowerPC) that effectively
nest nmi_enter(), make the primitive support this before adding even more.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lkml.kernel.org/r/20200505134100.864179229@linutronix.de
Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
With Book3s DAWR, ptrace and perf watchpoints on powerpc behaves
differently. Ptrace watchpoint works in one-shot mode and generates
signal before executing instruction. It's ptrace user's job to
single-step the instruction and re-enable the watchpoint. OTOH, in
case of perf watchpoint, kernel emulates/single-steps the instruction
and then generates event. If perf and ptrace creates two events with
same or overlapping address ranges, it's ambiguous to decide who
should single-step the instruction. Because of this issue, don't
allow perf and ptrace watchpoint at the same time if their address
range overlaps.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-15-ravi.bangoria@linux.ibm.com
Currently we assume that we have only one watchpoint supported by hw.
Get rid of that assumption and use dynamic loop instead. This should
make supporting more watchpoints very easy.
With more than one watchpoint, exception handler needs to know which
DAWR caused the exception, and hw currently does not provide it. So
we need sw logic for the same. To figure out which DAWR caused the
exception, check all different combinations of user specified range,
DAWR address range, actual access range and DAWRX constrains. For ex,
if user specified range and actual access range overlaps but DAWRX is
configured for readonly watchpoint and the instruction is store, this
DAWR must not have caused exception.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Michael Neuling <mikey@neuling.org>
[mpe: Unsplit multi-line printk() strings, fix some sparse warnings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200514111741.97993-14-ravi.bangoria@linux.ibm.com
Currently we calculate hw aligned start and end addresses manually.
Replace them with builtin ALIGN_DOWN() and ALIGN() macros.
So far end_addr was inclusive but this patch makes it exclusive (by
avoiding -1) for better readability.
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-13-ravi.bangoria@linux.ibm.com
Introduce is_ptrace_bp() function and move the check inside the
function. It will be utilize more in later set of patches.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-12-ravi.bangoria@linux.ibm.com
ptrace_bps is already an array of size HBP_NUM_MAX. But we use
hardcoded index 0 while fetching/updating it. Convert such code
to loop over array.
ptrace interface to use multiple watchpoint remains same. eg:
two PPC_PTRACE_SETHWDEBUG calls will create two watchpoint if
underneath hw supports it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-11-ravi.bangoria@linux.ibm.com
So far powerpc hw supported only one watchpoint. But Power10 is
introducing 2nd DAWR. Convert thread_struct->hw_brk into an array.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-10-ravi.bangoria@linux.ibm.com
Instead of disabling only first watchpoint, disable all available
watchpoints while clearing dawr_force_enable.
Callback function is used only for disabling watchpoint, rename it
to disable_dawrs_cb(). And null_brk parameter is not really required
while disabling watchpoint, remove it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-9-ravi.bangoria@linux.ibm.com
Introduce new parameter 'nr' to __set_breakpoint() which indicates
which DAWR should be programed. Also convert current_brk variable
to an array.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-7-ravi.bangoria@linux.ibm.com
Introduce new parameter 'nr' to set_dawr() which indicates which DAWR
should be programed.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-6-ravi.bangoria@linux.ibm.com
User can ask for num of available watchpoints(dbginfo.num_data_bps)
using ptrace(PPC_PTRACE_GETHWDBGINFO). Return actual number of
available watchpoints on the machine rather than hardcoded 1.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-5-ravi.bangoria@linux.ibm.com
So far we had only one watchpoint, so we have hardcoded HBP_NUM to 1.
But Power10 is introducing 2nd DAWR and thus kernel should be able to
dynamically find actual number of watchpoints supported by hw it's
running on. Introduce function for the same. Also convert HBP_NUM macro
to HBP_NUM_MAX, which will now represent maximum number of watchpoints
supported by Powerpc.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-4-ravi.bangoria@linux.ibm.com
Power10 is introducing second DAWR. Use real register names from ISA
for current macros:
s/SPRN_DAWR/SPRN_DAWR0/
s/SPRN_DAWRX/SPRN_DAWRX0/
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-2-ravi.bangoria@linux.ibm.com
If a prefixed instruction results in an alignment exception, the
SRR1_PREFIXED bit is set. The handler attempts to emulate the
responsible instruction and then increment the NIP past it. Use
SRR1_PREFIXED to determine by how much the NIP should be incremented.
Prefixed instructions are not permitted to cross 64-byte boundaries. If
they do the alignment interrupt is invoked with SRR1 BOUNDARY bit set.
If this occurs send a SIGBUS to the offending process if in user mode.
If in kernel mode call bad_page_fault().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-29-jniethe5@gmail.com
For powerpc64, redefine the ppc_inst type so both word and prefixed
instructions can be represented. On powerpc32 the type will remain the
same. Update places which had assumed instructions to be 4 bytes long.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Rework the get_user_inst() macros to be parameterised, and don't
assign to the dest if an error occurred. Use CONFIG_PPC64 not
__powerpc64__ in a few places. Address other comments from
Christophe. Fix some sparse complaints.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com
Currently patch_imm32_load_insns() is used to load an instruction to
r4 to be emulated by emulate_step(). For prefixed instructions we
would like to be able to load a 64bit immediate to r4. To prepare for
this make patch_imm64_load_insns() take an argument that decides which
register to load an immediate to - rather than hardcoding r3.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200516115449.4168796-1-mpe@ellerman.id.au
Prefix instructions have their own FSCR bit which needs to enabled via
a CPU feature. The kernel will save the FSCR for problem state but it
needs to be enabled initially.
If prefixed instructions are made unavailable by the [H]FSCR, attempting
to use them will cause a facility unavailable exception. Add "PREFIX" to
the facility_strings[].
Currently there are no prefixed instructions that are actually emulated
by emulate_instruction() within facility_unavailable_exception().
However, when caused by a prefixed instructions the SRR1 PREFIXED bit is
set. Prepare for dealing with emulated prefixed instructions by checking
for this bit.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200506034050.24806-22-jniethe5@gmail.com
Currently all instructions have the same length, but in preparation for
prefixed instructions introduce a function for returning instruction
length.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-18-jniethe5@gmail.com
Define specialised get_user_instr(), __get_user_instr() and
__get_user_instr_inatomic() macros for reading instructions from user
and/or kernel space.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Squash in addition of get_user_instr() & __user annotations]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-17-jniethe5@gmail.com
Instead of using memcpy() and flush_icache_range() use
patch_instruction() which not only accomplishes both of these steps but
will also make it easier to add support for prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-16-jniethe5@gmail.com
Introduce a probe_kernel_read_inst() function to use in cases where
probe_kernel_read() is used for getting an instruction. This will be
more useful for prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Don't write to *inst on error]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-15-jniethe5@gmail.com
Prefixed instructions will mean there are instructions of different
length. As a result dereferencing a pointer to an instruction will not
necessarily give the desired result. Introduce a function for reading
instructions from memory into the instruction data type.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-13-jniethe5@gmail.com
Currently unsigned ints are used to represent instructions on powerpc.
This has worked well as instructions have always been 4 byte words.
However, ISA v3.1 introduces some changes to instructions that mean
this scheme will no longer work as well. This change is Prefixed
Instructions. A prefixed instruction is made up of a word prefix
followed by a word suffix to make an 8 byte double word instruction.
No matter the endianness of the system the prefix always comes first.
Prefixed instructions are only planned for powerpc64.
Introduce a ppc_inst type to represent both prefixed and word
instructions on powerpc64 while keeping it possible to exclusively
have word instructions on powerpc32.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix compile error in emulate_spe()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-12-jniethe5@gmail.com
In preparation for an instruction data type that can not be directly
used with the '==' operator use functions for checking equality.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506034050.24806-11-jniethe5@gmail.com
Use a function for byte swapping instructions in preparation of a more
complicated instruction type.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506034050.24806-10-jniethe5@gmail.com
In preparation for using a data type for instructions that can not be
directly used with the '>>' operator use a function for getting the op
code of an instruction.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-9-jniethe5@gmail.com
In preparation for introducing a more complicated instruction type to
accommodate prefixed instructions use an accessor for getting an
instruction as a u32.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-8-jniethe5@gmail.com
In preparation for instructions having a more complex data type start
using a macro, ppc_inst(), for making an instruction out of a u32. A
macro is used so that instructions can be used as initializer elements.
Currently this does nothing, but it will allow for creating a data type
that can represent prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Change include guard to _ASM_POWERPC_INST_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-7-jniethe5@gmail.com
create_branch(), create_cond_branch() and translate_branch() return the
instruction that they create, or return 0 to signal an error. Separate
these concerns in preparation for an instruction type that is not just
an unsigned int. Fill the created instruction to a pointer passed as
the first parameter to the function and use a non-zero return value to
signify an error.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-6-jniethe5@gmail.com
The instructions for xmon's breakpoint are stored bpt_table[] which is in
the data section. This is problematic as the data section may be marked
as no execute. Move bpt_table[] to the text section.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-4-jniethe5@gmail.com
System Reset and Machine Check interrupts that are not recoverable due
to being nested or interrupting when RI=0 currently panic. This is not
necessary, and can often just kill the current context and recover.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200508043408.886394-16-npiggin@gmail.com
Similarly to the previous patch, do not trace system reset. This code
is used when there is a crash or hang, and tracing disturbs the system
more and has been known to crash in the crash handling path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-15-npiggin@gmail.com
Rather than notrace annotations throughout a significant part of the
machine check code across kernel/ pseries/ and powernv/ which can
easily be broken and is infrequently tested, use paca->ftrace_enabled
to blanket-disable tracing of the real-mode non-maskable handler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-14-npiggin@gmail.com
machine_check_early() is taken as an NMI, so nmi_enter() is used
there. machine_check_exception() is no longer taken as an NMI (it's
invoked via irq_work in the case a machine check hits in kernel mode),
so remove the nmi_enter() from that case.
In NMI context, hash faults don't try to refill the hash table, which
can lead to crashes accessing non-pinned kernel pages. System reset
still has this potential problem.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop change in show_regs() which breaks Book3E]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-12-npiggin@gmail.com
This allows rtas_args to be put on the machine check stack, which
avoids a lot of complications with re-entrancy deadlocks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-10-npiggin@gmail.com
A spare interrupt stack slot is needed to save irq state when
reconciling NMIs (sreset and decrementer soft-nmi). _DAR is used
for this, but we want to reconcile machine checks as well, which
do use _DAR. Switch to using RESULT instead, as it's used by
system calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-4-npiggin@gmail.com
The architecture allows for machine check exceptions to cause idle
wakeups which resume at the 0x200 address which has to return via
the idle wakeup code, but the early machine check handler is run
first.
The case of a no state-loss sleep is broken because the early
handler uses non-volatile register r1 , which is needed for the wakeup
protocol, but it is not restored.
Fix this by loading r1 from the MCE exception frame before returning
to the idle wakeup code. Also update the comment which has become
stale since the idle rewrite in C.
This crash was found and fix confirmed with a machine check injection
test in qemu powernv model (which is not upstream in qemu yet).
Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com
EEH device state is currently removed (by eeh_remove_device()) during
the device release handler, which is invoked as the device's reference
count drops to zero. This may take some time, or forever, as other
threads may hold references.
However, the PCI device state is released synchronously by
pci_stop_and_remove_bus_device(). This mismatch causes problems, for
example the device may be re-discovered as a new device before the
release handler has been called, leaving the PCI and EEH state
mismatched.
So instead, call eeh_remove_device() from the bus device removal
handlers, which are called synchronously in the removal path.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0a1f5105d3a33b1c090bba31de63eb0cdd25de7b.1588045502.git.sbobroff@linux.ibm.com
Currently we don't report anything useful in /proc/<pid>/status:
$ grep Speculation_Store_Bypass /proc/self/status
Speculation_Store_Bypass: unknown
Our mitigation is currently always a barrier instruction, which
doesn't map that well onto the existing possibilities for the PR_SPEC
values.
However even if we added a "barrier" type PR_SPEC value, userspace
would still need to consult some other source to work out which type
of barrier to use. So reporting "vulnerable" seems sufficient, as
userspace can see that and then consult its source to determine what
barrier to use.
Signed-off-by: Gustavo Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402124929.3574166-1-mpe@ellerman.id.au
Aneesh increased the size of struct pt_regs by 16 bytes and started
seeing this WARN_ON:
smp: Bringing up secondary CPUs ...
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318
NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000
REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000
CFAR: c000000000019cc8 IRQMASK: 1
GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033
GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164
GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030
GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066
GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890
GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080
GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90
GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200
NIP [c00000000001a2b4] giveup_all+0xb4/0x110
LR [c00000000001a29c] giveup_all+0x9c/0x110
Call Trace:
[c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable)
[c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480
[c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970
[c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70
[c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0
[c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40
[c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8
[c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0
[c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400
Which was unexpected. The warning is checking the thread.regs->msr
value of the task we are switching from:
usermsr = tsk->thread.regs->msr;
...
WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.
Dumping tsk->thread.regs->msr we see that it's: 0x1db60000
Which is not a normal looking MSR, in fact the only valid bit is
MSR_VSX, all the other bits are reserved in the current definition of
the MSR.
We can see from the oops that it was swapper/0 that we were switching
from when we hit the warning, ie. init_task. So its thread.regs points
to the base (high addresses) in init_stack.
Dumping the content of init_task->thread.regs, with the members of
pt_regs annotated (the 16 bytes larger version), we see:
0000000000000000 c000000002780080 gpr[0] gpr[1]
0000000000000000 c000000002666008 gpr[2] gpr[3]
c0000000026d3ed0 0000000000000078 gpr[4] gpr[5]
c000000000011b68 c000000002780080 gpr[6] gpr[7]
0000000000000000 0000000000000000 gpr[8] gpr[9]
c0000000026d3f90 0000800000002200 gpr[10] gpr[11]
c000000002004820 c0000000026d7200 gpr[12] gpr[13]
000000001db60000 c0000000010aabe8 gpr[14] gpr[15]
c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17]
c00000000294d598 0000000000000000 gpr[18] gpr[19]
0000000000000000 0000000000001ff8 gpr[20] gpr[21]
0000000000000000 c00000000206d608 gpr[22] gpr[23]
c00000000278e0cc 0000000000000000 gpr[24] gpr[25]
000000002fff0000 c000000000000000 gpr[26] gpr[27]
0000000002000000 0000000000000028 gpr[28] gpr[29]
000000001db60000 0000000004750000 gpr[30] gpr[31]
0000000002000000 000000001db60000 nip msr
0000000000000000 0000000000000000 orig_r3 ctr
c00000000000c49c 0000000000000000 link xer
0000000000000000 0000000000000000 ccr softe
0000000000000000 0000000000000000 trap dar
0000000000000000 0000000000000000 dsisr result
0000000000000000 0000000000000000 ppr kuap
0000000000000000 0000000000000000 pad[2] pad[3]
This looks suspiciously like stack frames, not a pt_regs. If we look
closely we can see return addresses from the stack trace above,
c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).
init_task->thread.regs is setup at build time in processor.h:
#define INIT_THREAD { \
.ksp = INIT_SP, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
The early boot code where we setup the initial stack is:
LOAD_REG_ADDR(r3,init_thread_union)
/* set up a stack pointer */
LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
add r1,r3,r1
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD).
Which is far too small to contain a pt_regs.
So the result is init_task->thread.regs is pointing at some stack
frames on the init stack, not at a pt_regs.
We have gotten away with this for so long because with pt_regs at its
current size the MSR happens to point into the first frame, at a
location that is not written to by the early asm. With the 16 byte
expansion the MSR falls into the second frame, which is used by the
compiler, and collides with a saved register that tends to be
non-zero.
As far as I can see this has been wrong since the original merge of
64-bit ppc support, back in 2002.
Conceptually swapper should have no regs, it never entered from
userspace, and in fact that's what we do on 32-bit. It's also
presumably what the "bogus" comment is referring to.
So I think the right fix is to just not-initialise regs at all. I'm
slightly worried this will break some code that isn't prepared for a
NULL regs, but we'll have to see.
Remove the comment in head_64.S which refers to us setting up the
regs (even though we never did), and is otherwise not really accurate
any more.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
It's not very nice to zero trap for this, because then system calls no
longer have trap_is_syscall(regs) invariant, and we can't distinguish
between sc and scv system calls (in a later patch).
Take one last unused bit from the low bits of the pt_regs.trap word
for this instead. There is not a really good reason why it should be
in trap as opposed to another field, but trap has some concept of
flags and it exists. Ideally I think we would move trap to 2-byte
field and have 2 more bytes available independently.
Add a selftests case for this, which can be seen to fail if
trap_norestart() is changed to return false.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make them static inlines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-4-mpe@ellerman.id.au
A new system call interrupt will be added with a new trap number.
Hide the explicit 0xc00 test behind an accessor to reduce churn
in callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make it a static inline]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-3-mpe@ellerman.id.au
The pt_regs.trap field keeps 4 low bits for some metadata about the
trap or how it was handled, which is masked off in order to test the
architectural trap number.
Add a set_trap() accessor to set this, equivalent to TRAP() for
returning it. This is actually not quite the equivalent of TRAP()
because it always clears the low bits, which may be harmless if
it can only be updated via ptrace syscall, but it seems dangerous.
In fact settting TRAP from ptrace doesn't seem like a great idea
so maybe it's better deleted.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make it a static inline rather than a shouty macro]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-2-mpe@ellerman.id.au
POSIX defines faccessat() as having a fourth "flags" argument, while the
linux syscall doesn't have it. Glibc tries to emulate AT_EACCESS and
AT_SYMLINK_NOFOLLOW, but AT_EACCESS emulation is broken.
Add a new faccessat(2) syscall with the added flags argument and implement
both flags.
The value of AT_EACCESS is defined in glibc headers to be the same as
AT_REMOVEDIR. Use this value for the kernel interface as well, together
with the explanatory comment.
Also add AT_EMPTY_PATH support, which is not documented by POSIX, but can
be useful and is trivial to implement.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When CONFIG_VIRT_CPU_ACCOUNTING is selected, system call exception
handler doesn't fit below 0xd00 and build fails.
As exception 0xd00 doesn't exist and is never generated by 40x,
comment it out in order to get more space for system call exception.
Fixes: 9e27086292 ("powerpc/32: Warn and return ENOSYS on syscalls from kernel")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/633165d72f75b4ef4c0901aebe99d3915c93e9a2.1589043863.git.christophe.leroy@csgroup.eu
Replace relaswap with built-in one, because relaswap
does a simple byte to byte swap.
Since Spectre mitigations have made indirect function calls more
expensive, and the default simple byte copies swap is implemented
without them, an "optimized" custom swap function is now
a waste of time as well as code.
Signed-off-by: Andrey Abramov <st5pub@yandex.ru>
Reviewed-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/994931554238042@iva8-b333b7f98ab0.qloud-c.yandex.net
There are other clocks than the standard ones, for instance
per process clocks. Therefore, being above the last standard clock
doesn't mean it is a bad clock. So, fallback to syscall instead
of returning -EINVAL inconditionaly.
Fixes: e33ffc956b ("powerpc/vdso32: implement clock_getres entirely")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://lore.kernel.org/r/7316a9e2c0c2517923eb4b0411c4a08d15e675a4.1589017281.git.christophe.leroy@csgroup.eu
To prevent verifying the kernel module appended signature
twice (finit_module), once by the module_sig_check() and again by IMA,
powerpc secure boot rules define an IMA architecture specific policy
rule only if CONFIG_MODULE_SIG_FORCE is not enabled. This,
unfortunately, does not take into account the ability of enabling
"sig_enforce" on the boot command line (module.sig_enforce=1).
Including the IMA module appraise rule results in failing the
finit_module syscall, unless the module signing public key is loaded
onto the IMA keyring.
This patch fixes secure boot policy rules to be based on
CONFIG_MODULE_SIG instead.
Fixes: 4238fad366 ("powerpc/ima: Add support to initialize ima policy rules")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/1588342612-14532-1-git-send-email-nayna@linux.ibm.com
Interrupts that use fast_interrupt_return actually do lock AMR, but
they have been ones which tend to come from userspace (or kernel bugs)
in radix mode. With kuap on hash, segment interrupts are taken in
kernel often, which quickly breaks due to the missing restore.
Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-6-npiggin@gmail.com
This merges the lockless page table walk rework series from Aneesh.
Because it touches powerpc KVM code we are sharing it with the kvm-ppc
tree in our topic/ppc-kvm branch.
This is the cover letter from Aneesh:
Avoid IPI while updating page table entries.
Problem Summary:
Slow termination of KVM guest with large guest RAM config due to a
large number of IPIs that were caused by clearing level 1 PTE
entries (THP) entries. This is shown in the stack trace below.
- qemu-system-ppc [kernel.vmlinux] [k] smp_call_function_many
- smp_call_function_many
- 36.09% smp_call_function_many
serialize_against_pte_lookup
radix__pmdp_huge_get_and_clear
zap_huge_pmd
unmap_page_range
unmap_vmas
unmap_region
__do_munmap
__vm_munmap
sys_munmap
system_call
__munmap
qemu_ram_munmap
qemu_anon_ram_free
reclaim_ramblock
call_rcu_thread
qemu_thread_start
start_thread
__clone
Why we need to do IPI when clearing PMD entries:
This was added as part of commit: 13bd817bb8 ("powerpc/thp: Serialize pmd clear against a linux page table walk")
serialize_against_pte_lookup makes sure that all parallel lockless
page table walk completes before we convert a PMD pte entry to regular
pmd entry. We end up doing that conversion in the below scenarios
1) __split_huge_zero_page_pmd
2) do_huge_pmd_wp_page_fallback
3) MADV_DONTNEED running parallel to page faults.
local_irq_disable and lockless page table walk:
The lockless page table walk work with the assumption that we can
dereference the page table contents without holding a lock. For this
to work, we need to make sure we read the page table contents
atomically and page table pages are not going to be freed/released
while we are walking the table pages. We can achieve by using a rcu
based freeing for page table pages or if the architecture implements
broadcast tlbie, we can block the IPI as we walk the page table pages.
To support both the above framework, lockless page table walk is done
with irq disabled instead of rcu_read_lock()
We do have two interface for lockless page table walk, gup fast and
__find_linux_pte. This patch series makes __find_linux_pte table walk
safe against the conversion of PMD PTE to regular PMD.
gup fast:
gup fast is already safe against THP split because kernel now
differentiate between a pmd split and a compound page split. gup fast
can run parallel to a pmd split and we prevent a parallel gup fast to
a hugepage split, by freezing the page refcount and failing the
speculative page ref increment.
Similar to how gup is safe against parallel pmd split, this patch
series updates the __find_linux_pte callers to be safe against a
parallel pmd split. We do that by enforcing the following rules.
1) Don't reload the pte value, because that can be updated in
parallel.
2) Code should be able to work with a stale PTE value and not the
recent one. ie, the pte value that we are looking at may not be the
latest value in the page table.
3) Before looking at pte value check for _PAGE_PTE bit. We now do this
as part of pte_present() check.
Performance:
This speeds up Qemu guest RAM del/unplug time as below
128 core, 496GB guest:
Without patch:
munmap start: timer = 13162 ms, PID=7684
munmap finish: timer = 95312 ms, PID=7684 - delta = 82150 ms
With patch (upto removing IPI)
munmap start: timer = 196449 ms, PID=6681
munmap finish: timer = 196488 ms, PID=6681 - delta = 39ms
With patch (with adding the tlb invalidate in pmdp_huge_get_and_clear_full)
munmap start: timer = 196345 ms, PID=6879
munmap finish: timer = 196714 ms, PID=6879 - delta = 369ms
Link: https://lore.kernel.org/r/20200505071729.54912-1-aneesh.kumar@linux.ibm.com
A lockless page table walk should be safe against parallel THP collapse, THP
split and madvise(MADV_DONTNEED)/parallel fault. This patch makes sure kernel
won't reload the pteval when checking for different conditions. The patch also added
a check for pte_present to make sure the kernel is indeed operating
on a PTE and not a pointer to level 0 table page.
The pfn value we find here can be different from the actual pfn on which
machine check happened. This can happen if we raced with a parallel update
of the page table. In such a scenario we end up isolating a wrong pfn. But that
doesn't have any other side effect.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-7-aneesh.kumar@linux.ibm.com
This is only used with init_mm currently. Walking init_mm is much simpler
because we don't need to handle concurrent page table like other mm_context
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-5-aneesh.kumar@linux.ibm.com
Commit 0962e8004e ("powerpc/prom: Scan reserved-ranges node for
memory reservations") enabled support to parse reserved-ranges DT
node and reserve kernel memory falling in these ranges for F/W
purposes. Memory reserved for FADump should not overlap with these
ranges as it could corrupt memory meant for F/W or crash'ed kernel
memory to be exported as vmcore.
But since commit 579ca1a276 ("powerpc/fadump: make use of memblock's
bottom up allocation mode"), memblock_find_in_range() is being used to
find the appropriate area to reserve memory for FADump, which can't
account for reserved-ranges as these ranges are reserved only after
FADump memory reservation.
With reserved-ranges now being populated during early boot, look out
for these memory ranges while reserving memory for FADump. Without
this change, MPIPL on PowerNV systems aborts with hostboot failure,
when memory reserved for FADump is less than 4096MB.
Fixes: 579ca1a276 ("powerpc/fadump: make use of memblock's bottom up allocation mode")
Cc: stable@vger.kernel.org
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/158737297693.26700.16193820746269425424.stgit@hbathini.in.ibm.com
At times, memory ranges have to be looked up during early boot, when
kernel couldn't be initialized for dynamic memory allocation. In fact,
reserved-ranges look up is needed during FADump memory reservation.
Without accounting for reserved-ranges in reserving memory for FADump,
MPIPL boot fails with memory corruption issues. So, extend memory
ranges handling to support static allocation and populate reserved
memory ranges during early boot.
Fixes: dda9dbfeeb ("powerpc/fadump: consider reserved ranges while releasing memory")
Cc: stable@vger.kernel.org
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/158737294432.26700.4830263187856221314.stgit@hbathini.in.ibm.com
The system reset interrupt handler locks AMR and exits with
EXCEPTION_RESTORE_REGS without restoring AMR. Similarly to the
soft-NMI handler, it needs to restore.
Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-5-npiggin@gmail.com
Any kind of WARN causes a program check that will crash with
unrecoverable exception if it occurs when RI is clear.
Fixes: 68b34588e2 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-2-npiggin@gmail.com
Hugh reported that his trusty G5 crashed after a few hours under load
with an "Unrecoverable exception 380".
The crash is in interrupt_return() where we check lazy_irq_pending(),
which calls get_paca() and with CONFIG_DEBUG_PREEMPT=y that goes to
check_preemption_disabled() via debug_smp_processor_id().
As Nick explained on the list:
Problem is MSR[RI] is cleared here, ready to do the last few things
for interrupt return where we're not allowed to take any other
interrupts.
SLB interrupts can happen just about anywhere aside from kernel
text, global variables, and stack. When that hits, it appears to be
unrecoverable due to RI=0.
The problematic access is in preempt_count() which is:
return READ_ONCE(current_thread_info()->preempt_count);
Because of THREAD_INFO_IN_TASK, current_thread_info() just points to
current, so the access is to somewhere in kernel memory, but not on
the stack or in .data, which means it can cause an SLB miss. If we
take an SLB miss with RI=0 it is fatal.
The easiest solution is to add a version of lazy_irq_pending() that
doesn't do the preemption check and call it from the interrupt return
path.
Fixes: 68b34588e2 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200502143316.929341-1-mpe@ellerman.id.au
On Pseries LPARs, to calculate utilization, we need to know the
[S]PURR ticks when the CPUs were busy or idle.
The total PURR and SPURR ticks are already exposed via the per-cpu
sysfs files "purr" and "spurr". This patch adds support for exposing
the idle PURR and SPURR ticks via new per-cpu sysfs files named
"idle_purr" and "idle_spurr".
This patch also adds helper functions to accurately read the values of
idle_purr and idle_spurr especially from an interrupt context between
when the interrupt has occurred between the pseries_idle_prolog() and
pseries_idle_epilog(). This will ensure that the idle purr/spurr
values corresponding to the latest idle period is accounted for before
these values are read.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-5-git-send-email-ego@linux.vnet.ibm.com
CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32
which doesn't exists.
Fixing it leads to a deadlock due to a vital register getting
clobbered in _switch().
Change dependency to PPC32 and use r0 instead of r4 in _switch()
Fixes: e2fb9f5444 ("powerpc/32: Prepare for Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr
If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
the block-size value for both. Per the devicetree spec cache-line-size
is only needed if it differs from the block size.
Originally the code would fallback from block size to line size. An
error message was printed if both properties were missing.
Later the code was refactored to use clearer names and logic but it
inadvertently made line size a required property, meaning on systems
without a line size property we fall back to the default from the
cputable.
On powernv (OPAL) platforms, since the introduction of device tree CPU
features (5a61ef74f2 ("powerpc/64s: Support new device tree binding
for discovering CPU features")), that has led to the wrong value being
used, as the fallback value is incorrect for Power8/Power9 CPUs.
The incorrect values flow through to the VDSO and also to the sysconf
values, SC_LEVEL1_ICACHE_LINESIZE etc.
Fixes: bd067f83b0 ("powerpc/64: Fix naming of cache block vs. cache line")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reported-by: Qian Cai <cai@lca.pw>
[mpe: Add even more detail to change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz
set_thread_uses_vas() sets used_vas flag for a process that opened VAS
window and issue CP_ABORT during context switch for only that process.
In multi-thread application, windows can be shared. For example Thread
A can open a window and Thread B can run COPY/PASTE instructions to
send NX request which may cause corruption or snooping or a covert
channel Also once this flag is set, continue to run CP_ABORT even the
VAS window is closed.
So define vas-windows counter in process mm_context, increment this
counter for each window open and decrement it for window close. If
vas-windows is set, issue CP_ABORT during context switch. It means
clear the foreign real address mapping only if the process / thread
uses COPY/PASTE. Then disable it for that process if windows are not
open.
Moved set_thread_uses_vas() code to vas_tx_win_open() as this
functionality is needed only for userspace open windows. We are adding
VAS userspace support along with this fix. So no need to include this
fix in stable releases.
Fixes: 9d2a4d7133 ("powerpc: Define set_thread_uses_vas()")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Suggested-by: Milton Miller <miltonm@us.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587017291.2275.1077.camel@hbabu-laptop
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and turn it off
by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to:
Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=72sb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
Generated files are also checked by sparse that's why add newline to
remove sparse (C=1) warning.
The issue was found on Microblaze and reported like this:
./arch/microblaze/include/generated/uapi/asm/unistd_32.h:438:45: warning:
no newline at end of file
Mips and PowerPC have it already but let's align with style used by m68k.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (xtensa)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/4d32ab4e1fb2edb691d2e1687e8fb303c09fd023.1581504803.git.michal.simek@xilinx.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
This reverts commit ebb37cf3ff.
That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.
The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.
The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).
Fixes: ebb37cf3ff ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com
The PowerPC time code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Remove the #ifdef protecting the of_clk_init() call, as a stub is
available for the !CONFIG_COMMON_CLK case.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200213083804.24315-1-geert+renesas@glider.be
- Unit test for overlays with GPIO hogs
- Improve dma-ranges parsing to handle dma-ranges with multiple entries
- Update dtc to upstream version v1.6.0-2-g87a656ae5ff9
- Improve overlay error reporting
- Device link support for power-domains and hwlocks bindings
- Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
ITE Tech
- Add deprecated Marvell vendor prefix 'mrvl'
- A bunch of binding conversions to DT schema continues. Of note, the
common serial and USB connector bindings are converted.
- Add more Arm CPU compatibles
- Drop Mark Rutland as DT maintainer :(
-----BEGIN PGP SIGNATURE-----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=db/l
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Unit test for overlays with GPIO hogs
- Improve dma-ranges parsing to handle dma-ranges with multiple entries
- Update dtc to upstream version v1.6.0-2-g87a656ae5ff9
- Improve overlay error reporting
- Device link support for power-domains and hwlocks bindings
- Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
ITE Tech
- Add deprecated Marvell vendor prefix 'mrvl'
- A bunch of binding conversions to DT schema continues. Of note, the
common serial and USB connector bindings are converted.
- Add more Arm CPU compatibles
- Drop Mark Rutland as DT maintainer :(
* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
MAINTAINERS: drop an old reference to stm32 pwm timers doc
MAINTAINERS: dt: update etnaviv file reference
dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
dt-bindings: uniphier-system-bus: fix warning in the example
dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
dt-bindings: power: Fix example for power-domain
dt-bindings: arm: Add some constraints for PSCI nodes
of: some unittest overlays not untracked
of: gpio unittest kfree() wrong object
dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
dt-bindings: serial: sh-sci: Convert to json-schema
dt-bindings: serial: Document serialN aliases
dt-bindings: thermal: tsens: Set 'additionalProperties: false'
dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
dt-bindings: vendor-prefixes: Add Beacon vendor prefix
dt-bindings: vendor-prefixes: Add Topwise
of: of_private.h: Replace zero-length array with flexible-array member
docs: dt: fix a broken reference to input.yaml
docs: dt: fix references to ap806-system-controller.txt
...
Commit 3282a3da25 ("powerpc/64: Implement soft interrupt replay in C")
broke the doorbell wakeup optimisation introduced by commit a9af97aa0a
("powerpc/64s: msgclr when handling doorbell exceptions from system
reset").
This patch restores the msgclr, in C code. It's now done in the system
reset wakeup path rather than doorbell interrupt replay where it used
to be, because it is always the right thing to do in the wakeup case,
but it may be rarely of use in other interrupt replay situations in
which case it's wasted work - we would have to run measurements to see
if that was a worthwhile optimisation, and I suspect it would not be.
The results are similar to those in the original commit, test on POWER8
of context_switch selftests benchmark with polling idle disabled (e.g.,
always nap, giving cross-CPU IPIs) gives the following results:
broken patched
Different threads, same core: 317k/s 375k/s +18.7%
Different cores: 280k/s 282k/s +1.0%
Fixes: 3282a3da25 ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402121212.1118218-1-npiggin@gmail.com
Before checking for cpu_type == NULL, this same copy happens, so doing
it here will just write the same value to the t->oprofile_type
again.
Remove the repeated copy, as it is unnecessary.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200215053637.280880-1-leonardo@linux.ibm.com
The ISA_DMA_THRESHOLD variable is set by several platforms but never
referenced.
Remove it.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191125092033.20014-1-rppt@kernel.org
Relocatable kernel builds produce a warning about .gnu.hash being an
orphan section:
ld: warning: orphan section `.gnu.hash' from `linker stubs' being placed in section `.gnu.hash'
If we try to discard it the build fails:
ld -EL -m elf64lppc -pie --orphan-handling=warn --build-id -o
.tmp_vmlinux1 -T ./arch/powerpc/kernel/vmlinux.lds --whole-archive
arch/powerpc/kernel/head_64.o arch/powerpc/kernel/entry_64.o
...
sound/built-in.a net/built-in.a virt/built-in.a --no-whole-archive
--start-group lib/lib.a --end-group
ld: could not find section .gnu.hash
So add an entry to explicitly retain it, as we do for .hash.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200227045933.22967-1-mpe@ellerman.id.au
This reconciles interrupts in the system call case like all other
interrupts. This allows system_call_common to be shared with the scv
system call implementation in a subsequent patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-31-npiggin@gmail.com
Regular interrupt return restores NVGPRS whereas lite returns do not.
This is clumsy: most interrupts can return without restoring NVGPRS in
most of the time, but there are special cases that require it (when
registers have been modified by the kernel). So change interrupt
return to not restore NVGPRS, and have interrupt handlers restore them
explicitly in the cases that requires it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-30-npiggin@gmail.com
Implement the bulk of interrupt return logic in C. The asm return code
must handle a few cases: restoring full GPRs, and emulating stack
store.
The stack store emulation is significantly simplfied, rather than
creating a new return frame and switching to that before performing
the store, it uses the PACA to keep a scratch register around to
perform the store.
The asm return code is moved into 64e for now. The new logic has made
allowance for 64e, but I don't have a full environment that works well
to test it, and even booting in emulated qemu is not great for stress
testing. 64e shouldn't be too far off working with this, given a bit
more testing and auditing of the logic.
This is slightly faster on a POWER9 (page fault speed increases about
1.1%), probably due to reduced mtmsrd.
mpe: Includes fixes from Nick for _TIF_EMULATE_STACK_STORE
handling (including the fast_interrupt_return path), to remove
trace_hardirqs_on(), and fixes the interrupt-return part of the
MSR_VSX restore bug caught by tm-unavailable selftest.
mpe: Incorporate fix from Nick:
The return-to-kernel path has to replay any soft-pending interrupts if
it is returning to a context that had interrupts soft-enabled. It has
to do this carefully and avoid plain enabling interrupts if this is an
irq context, which can cause multiple nesting of interrupts on the
stack, and other unexpected issues.
The code which avoided this case got the soft-mask state wrong, and
marked interrupts as enabled before going around again to retry. This
seems to be mostly harmless except when PREEMPT=y, this calls
preempt_schedule_irq with irqs apparently enabled and runs into a BUG
in kernel/sched/core.c
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-29-npiggin@gmail.com
When local_irq_enable() finds a pending soft-masked interrupt, it
"replays" it by setting up registers like the initial interrupt entry,
then calls into the low level handler to set up an interrupt stack
frame and process the interrupt.
This is not necessary, and uses more stack than needed. The high level
interrupt handler can be called directly from C, with just pt_regs set
up on stack. This should be faster and use less stack.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-28-npiggin@gmail.com
Kernel addresses and potentially other sensitive data could be leaked
in volatile registers after a syscall.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-27-npiggin@gmail.com
System call entry and particularly exit code is beyond the limit of
what is reasonable to implement in asm.
This conversion moves all conditional branches out of the asm code,
except for the case that all GPRs should be restored at exit.
Null syscall test is about 5% faster after this patch, because the
exit work is handled under local_irq_disable, and the hard mask and
pending interrupt replay is handled after that, which avoids games
with MSR.
mpe: Includes subsequent fixes from Nick:
This fixes 4 issues caught by TM selftests. First was a tm-syscall bug
that hit due to tabort_syscall being called after interrupts were
reconciled (in a subsequent patch), which led to interrupts being
enabled before tabort_syscall was called. Rather than going through an
un-reconciling interrupts for the return, I just go back to putting
the test early in asm, the C-ification of that wasn't a big win
anyway.
Second is the syscall return _TIF_USER_WORK_MASK check would go into
an infinite loop if _TIF_RESTORE_TM became set. The asm code uses
_TIF_USER_WORK_MASK to brach to slowpath which includes
restore_tm_state.
Third is system call return was not calling restore_tm_state, I missed
this completely (alhtough it's in the return from interrupt C
conversion because when the asm syscall code encountered problems it
would branch to the interrupt return code.
Fourth is MSR_VEC missing from restore_math, which was caught by
tm-unavailable selftest taking an unexpected facility unavailable
interrupt when testing VSX unavailble exception with MSR.FP=1
MSR.VEC=1. Fourth case also has a fixup in a subsequent patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-26-npiggin@gmail.com
powerpc has an optimisation where interrupts avoid saving the
non-volatile (or callee saved) registers to the interrupt stack frame
if they are not required.
Two problems with this are that an interrupt does not always know
whether it will need non-volatiles; and if it does need them, they can
only be saved from the entry-scoped asm code (because we don't control
what the C compiler does with these registers).
system calls are the most difficult: some system calls always require
all registers (e.g., fork, to copy regs into the child). Sometimes
registers are only required under certain conditions (e.g., tracing,
signal delivery). These cases require ugly logic in the call
chains (e.g., ppc_fork), and require a lot of logic to be implemented
in asm.
So remove the optimisation for system calls, and always save NVGPRs on
entry. Modern high performance CPUs are not so sensitive, because the
stores are dense in cache and can be hidden by other expensive work in
the syscall path -- the null syscall selftests benchmark on POWER9 is
not slowed (124.40ns before and 123.64ns after, i.e., within the
noise).
Other interrupts retain the NVGPR optimisation for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-24-npiggin@gmail.com
The soft NMI handler does not reconcile interrupt state, so it should
not return via the normal ret_from_except path. Return like other NMIs,
using the EXCEPTION_RESTORE_REGS macro.
This becomes important when the scv interrupt is implemented, which
must handle soft-masked interrupts that have r13 set to something
other than the PACA -- returning to kernel in this case must restore
r13.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-23-npiggin@gmail.com
This adds IRQ_HARD_DIS to irq_happened. Although it doesn't seem to
matter much because we're not allowed to enable irqs in an NMI
handler, the soft-irq debugging code is becoming more strict about
ensuring IRQ_HARD_DIS is in sync with MSR[EE], this may help avoid
asserts or other issues.
Add a comment explaining why MCE does not have this. Early machine
check is generally much smaller and more contained code which will
explode if you look at it wrong anyway as it runs in real mode, though
there's an argument that we should do similar reconciling for the MCE
as well.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-22-npiggin@gmail.com
Apart from SRESET, MCE, and syscall (hcall variant), the SRR type
interrupts are not escalated to hypervisor mode, so are delivered to
the OS.
When running PR KVM, the OS is the hypervisor, and the guest runs with
MSR[PR]=1 (ie. usermode), so these interrupts must test if a guest was
running when interrupted. These tests are required at the real-mode
entry points because the PR KVM host runs with LPCR[AIL]=0.
In HV KVM and nested HV KVM, the guest always receives these
interrupts, so there is no need for the host to make this test. So
remove the tests if PR KVM is not configured.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-21-npiggin@gmail.com
A few of the non-standard handlers are left uncommented. Some more
description could be added to some.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-20-npiggin@gmail.com
The hdec interrupt handler is reported to sometimes fire in Linux if
KVM leaves it pending after a guest exists. This is harmless, so there
is a no-op handler for it.
The interrupt handler currently uses the regular kernel stack. Change
this to avoid touching the stack entirely.
This should be the last place where the regular Linux stack can be
accessed with asynchronous interrupts (including PMI) soft-masked.
It might be possible to take advantage of this invariant, e.g., to
context switch the kernel stack SLB entry without clearing MSR[EE].
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-17-npiggin@gmail.com
Replace IEARLY=1 and IEARLY=2 with IBRANCH_COMMON, which controls if
the entry code branches to a common handler; and IREALMODE_COMMON,
which controls whether the common handler should remain in real mode.
These special cases no longer avoid loading the SRR registers, there
is no point as most of them load the registers immediately anyway.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-14-npiggin@gmail.com
This allows more code to be moved out of unrelocated regions. The
system call KVMTEST is changed to be open-coded and remain in the
tramp area to avoid having to move it to entry_64.S. The custom nature
of the system call entry code means the hcall case can be made more
streamlined than regular interrupt handlers.
mpe: Incorporate fix from Nick:
Moving KVM test to the common entry code missed the case of HMI and
MCE, which do not do __GEN_COMMON_ENTRY (because they don't want to
switch to virt mode).
This means a MCE or HMI exception that is taken while KVM is running a
guest context will not be switched out of that context, and KVM won't
be notified. Found by running sigfuz in guest with patched host on
POWER9 DD2.3, which causes some TM related HMI interrupts (which are
expected and supposed to be handled by KVM).
This fix adds a __GEN_REALMODE_COMMON_ENTRY for those handlers to add
the KVM test. This makes them look a little more like other handlers
that all use __GEN_COMMON_ENTRY.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-13-npiggin@gmail.com
As well as moving code out of the unrelocated vectors, this allows the
masked handlers to be moved to common code, and allows the soft_nmi
handler to be generated more like a regular handler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-12-npiggin@gmail.com
The real mode interrupt entry points currently use rfid to branch to
the common handler in virtual mode. This is a significant amount of
code, and forces other code (notably the KVM test) to live in the
real mode handler.
In the interest of minimising the amount of code that runs unrelocated
move the switch to virt mode into the common code, and do it with
mtmsrd, which avoids clobbering SRRs (although the post-KVMTEST
performance of real-mode interrupt handlers is not a big concern these
days).
This requires CTR to always be saved (real-mode needs to reach 0xc...)
but that's not a huge impact these days. It could be optimized away in
future.
mpe: Incorporate fix from Nick:
It's possible for interrupts to be replayed when TM is enabled and
suspended, for example rt_sigreturn, where the mtmsrd MSR_KERNEL in
the real-mode entry point to the common handler causes a TM Bad Thing
exception (due to attempting to clear suspended).
The fix for this is to have replay interrupts go to the _virt entry
point and skip the mtmsrd, which matches what happens before this
patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-11-npiggin@gmail.com
Aside from label names and BUG line numbers, the generated code change
is an additional HMI KVM handler added for the "late" KVM handler,
because early and late HMI generation is achieved by defining two
different interrupt types.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-6-npiggin@gmail.com
These don't provide a large amount of code sharing. Removing them
makes code easier to shuffle around. For example, some of the common
instructions will be moved into the common code gen macro.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-5-npiggin@gmail.com
Jordan Niethe