The uvc_mc_register_entities() function iterated over the entities three
times to initialize the entities, register the subdev for the ones whose
type was UVC_TT_STREAMING and to create the entities links.
But this can be simplied by merging the init and registration logic in a
single loop.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The function uvc_mc_create_pads_links() creates entities links but the
"pads" prefix is redundant since the driver doesn't handle any other
kind of link, so it can be removed.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The for loop in the vsp1_create_entities() function that create the links,
checks the entity type and call the proper link creation function but then
it uses continue to force the next iteration of the loop to take place and
skipping code in between that creates links for different entities types.
It is more readable and easier to understand if the if else constructs is
used instead of the continue statement.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The functions that create entities links are called *_create_pads_links()
but the "pads" prefix is redundant since the driver doesn't handle any
other kind of link so it can be removed.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The isp_subdev_notifier_complete() complete callback defines a struct
v4l2_device *v4l2_dev to avoid needing two level of indirections to
access the V4L2 subdevs but the var is not always used when possible
as when calling v4l2_device_register_subdev_nodes().
So change that to consistently use the defined v4l2_dev pointer var.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit bc36b30fe06b ("[media] omap3isp: separate links creation from
entities init") moved the link creation logic from the entities init
functions and so removed the error_link labels from the error paths.
But after that, some functions have a single error label so it makes
more sense to rename the label to just "error" in thi case.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The function that creates the links between ISP internal and external
entities is called isp_create_pads_links() but the "pads" prefix is
redundant since the driver doesn't handle any other kind of link so
it can just be removed.
While being there, fix the function's kernel-doc since is not using
a proper format.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The entities to video nodes links were created on separate functions for
each ISP module but since the only thing that these functions do is to
call media_create_pad_link(), there's no need for that indirection level
and all link creation logic can be just inlined in the caller function.
Also, since the only possible failure for the link creation is a memory
allocation, there is no need for error messages since the core already
reports a very verbose message in that case.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
By using u64 integers and pointers, we can get rid of compat32
logic. So, let's do it!
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The pad index is unsigned. Replace the occurences of it where
pertinent.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Several additional functions are described at media-entity.c.
Moving them to the header file, to make the code cleaner and
to have all such macros at the same place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Those media_obj_* functions are actually creating/destroying
media graph objects. So, rename them to better represent
what they're actually doing.
No functional changes.
This was created via this small shell script:
for i in $(git grep -l media_gobj_init); do sed s,media_gobj_init,media_gobj_create,g <$i >a && mv a $i; done
for i in $(git grep -l media_gobj_remove); do sed s,media_gobj_remove,media_gobj_destroy,g <$i >a && mv a $i; done
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> > > + if (rlink != link->reverse) {
> > > + r++;
> >
> > The variable is incremented here but otherwise never used, you can remove it.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Move this function to happen earlier, in order to avoid
a uneeded forward declaration.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This function was used in the past to free the links
that were allocated by the media controller core.
However, this is not needed anymore. We should likely
get rid of the funcion on some function, but, for now,
let's just convert into an inlined function and let the
compiler to get rid of it.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Both revision and group_id fields were never used and were always
initialized to zero. Remove them.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
With the MC next gen rework, what's left for media_entity_init()
is to just initialize the PADs. However, certain devices, like
a FLASH led/light doesn't have any input or output PAD.
So, there's no reason why calling media_entity_init() would be
mandatory. Also, despite its name, what this function actually
does is to initialize the PADs data. So, rename it to
media_entity_pads_init() in order to reflect that.
The media entity actual init happens during entity register,
at media_device_register_entity(). We should move init of
num_links and num_backlinks to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The __media_device_enum_links() copies links definitions from
Kernelspace to userspace. It has to work with 3 structs that
handle with links. Better name them to:
link: Kernelspace internal link representation, of the
type media_link;
klink_desc: struct media_link_desc pointer to the
kernel memory where the data will be filled;
ulink_desc: struct media_link_desc pointer to the
memory where the data will be copied to
userspace.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It is better to keep the headers in alphabetic order.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If an entity is registered with a media device before is initialized
with media_device_register_entity(), the number of pads won't be set
so media_device_register_entity() won't create pad objects and add
it to the media device pads list.
Do this at entity initialization time if the entity was registered
before so the graph is complete and correct regardless of the order
in which the entities are initialized and registered.
Suggested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The entity->num_pads are defined as u16. So, better to use an
unsigned int, as this prevents additional warnings when W=2
(or W=1 on some architectures).
The "i" counter at __media_device_get_topology() is also a
monotonic counter that should never be below zero. So,
make it unsigned too.
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We should not be creating device nodes at IRQ contexts. So,
the only flags we'll be using will be GFP_KERNEL. Let's
remove the gfp_flags, in order to make the interface simpler.
If we ever need it, it would be easy to revert those changes.
While here, remove an extra blank line.
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Indirect links are those whose interface indirectly controls
other functions.
There are two interfaces that have indirect controls at the DVB
side:
- the network interface, which also controls the demux;
- the DVR interface which also controls the demux.
One could argue that the frontend control to the tuner is indirect.
Well, that's debatable. There's no way to create subdev interfaces
for tuner and demod, as those devices are tightly coupled. So, it
was decided that just one interface is the best to control both
entities, and there's no plan (or easy way) to decouple both. So,
the DVB frontend interface should link to both entities.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cleanup the code a little bit by moving the routine that creates
links between DVR and demux to the I/O entitis into a separate
function.
While here, fix the code to use strncmp() instead of strcmp().
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that entities have a main function, expose it via
MEDIA_IOC_G_TOPOLOGY ioctl.
Please notice that some entities may have secundary functions.
Such use case will be addressed later, when we add support for the
Media Controller properties.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Entities should have one or more functions. Calling it as a
type proofed to not be correct, as an entity could eventually
have more than one type.
So, rename the field as function.
Please notice that this patch doesn't extend support for
multiple function entities. Such change will happen when
we have real case drivers using it.
No functional changes.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the graph creation fails, don't register the device.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the graph creation fails, don't register the device.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If media controller is enabled and mdev is filled, it should
ensure that the media graph will be properly initialized.
Enforce that.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Interface links are normally enabled, meaning that the interfaces are
bound to the entities. So, any ioctl send to the interface are reflected
at the entities managed by the interface.
However, when a device is used, other interfaces for the same hardware
could be decoupled from the entities linked to them, because the
hardware may have some parts busy.
That's for example, what happens when an hybrid TV device is in use.
If it is streaming analog TV or capturing signals from S-Video/Composite
connectors, typically the digital part of the hardware can't be used and
vice-versa.
This is generally due to some internal hardware or firmware limitation,
that it is not easily mapped via data pipelines.
What the Kernel drivers do internally is that they decouple the hardware
from the interface. So, all changes, if allowed, are done only at some
interface cache, but not physically changed at the hardware.
The usage is similar to the usage of the MEDIA_LNK_FL_ENABLED on data
links. So, let's use the same flag to indicate if either the interface
to entity link is bound/enabled or not.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Due to the graph traversal algorithm currently in usage, we
need a copy of all data links. Those backlinks should not be
send to userspace, as otherwise, all links there will be
duplicated.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Depending on the input, an au0828 may have a different
number of connectors. add entities to represent them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
V4L2 device (and subdevice) nodes should create an interface, if the
Media Controller support is enabled.
Please notice that radio devices should not create an entity, as radio
input/output is either via wires or via ALSA.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Right now, if something gets wrong at dvb_create_media_entity()
or at dvb_create_media_graph(), the device will still be
registered.
Change the logic to properly handle it and free all media graph
objects if something goes wrong at dvb_register_device().
Also, change the logic at dvb_create_media_graph() to return
an error code if something goes wrong. It is up to the
caller to implement the right logic and to call
dvb_unregister_device() to unregister the already-created
objects.
While here, add a missing logic to unregister the created
interfaces.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The logic is testing if num_links==0 at the wrong place. Due to
that, a backlink may be kept without removal, causing KASAN
to complain about usage after free during either entity or
link removal.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The media_entity_cleanup() function only cleans up the entity links list
but this operation is already made in media_device_unregister_entity().
In most cases this should be harmless (besides having duplicated code)
since the links list would be empty so the iteration would not happen
but the links list is initialized in media_device_register_entity() so
if a driver fails to register an entity with a media device and clean up
the entity in the error path, a NULL deference pointer error will happen.
So don't try to empty the links list in media_entity_cleanup() since
is either done already or haven't been initialized yet.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
The DVB core needs to unregister the media device. So, we
can't call au0828_unregister_media_device() before calling
au0828_dvb_unregister(), otherwise the DVB MC free code
(that will be implemented on the next patch) will fail.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Interface links are normally enabled, meaning that the interfaces are
bound to the entities. So, any ioctl sent to the interface are reflected
at the entities managed by the interface.
However, when a device is in use, other interfaces for the same hardware
could be decoupled from the entities linked to them, because the
hardware may have some parts busy.
That's for example, what happens when an hybrid TV device is in use.
If it is streaming analog TV or capturing signals from S-Video/Composite
connectors, typically the digital part of the hardware can't be used and
vice-versa.
This is generally due to some internal hardware or firmware limitation,
that it is not easily mapped via data pipelines.
What the Kernel drivers do internally is that they decouple the hardware
from the interface. So, all changes, if allowed, are done only at some
interface cache, but not physically changed at the hardware.
The usage is similar to the usage of the MEDIA_LNK_FL_ENABLED on data
links. So, let's use the same flag to indicate if either the interface
to entity link is bound/enabled or not.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Tuners actually have at least one connector on its input.
Add a PAD to connect it.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Some parts of the media controller are using mutexes while
others are using spin locks in order to protect creation
and removal of elements in the graph. That's wrong!
Also, the V4L2 core can remove graph elements on non-interactive
context:
BUG: sleeping function called from invalid context at include/linux/sched.h:2776
Fix it by always using spin locks for graph element addition/removal,
just like entity creation/removal is protected at media-device.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Just like what's done with entities, when the media controller is
unregistered, release any interface and interface links that
might still be there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Interface links connected to an entity should be removed
before the entity itself can be removed.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add functions to explicitly unregister all entity links.
This function is called automatically when an entity
link is destroyed.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for the new MEDIA_IOC_G_TOPOLOGY ioctl, according
with the RFC for the MC next generation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Every time a graph object is added or removed, the version
of the topology changes. That's a requirement for the new
MEDIA_IOC_G_TOPOLOGY, in order to allow userspace to know
that the topology has changed after a previous call to it.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The MC next gen API sends objects to userspace grouped by
their types.
In the case of pads and links, in order to improve performance
and have a simpler code, the best is to store them also on
separate linked lists at MC.
If we don't do that, we would need this kind of interaction
to send data to userspace (code is in structured english):
for each entity:
for each pad:
store pads
for each entity:
for each link:
store link
for each interface:
for each link:
store link
With would require one nested loop for pads and two nested
loops for links. By using separate linked lists for them,
just one loop would be enough.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Let's control the topology changes inside the graph_object. So, move the
addition and removal of interfaces/entities from the mdev lists to
media_gobj_init() and media_gobj_remove().
The main reason is that mdev should have lists for all object types, as
the new MC api will require to store objects in separate places.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Just like we do with entities, use a similar macro for the
interfaces loop.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sometimes, it is important to see if the created pad is
sink or source. Add info to track that.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The Media Controller New Generation redefines the types for both
interfaces and entities to be used on DVB. Make the needed
changes at the DVB core for all interfaces, entities and
data and interface links to appear in the graph.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of abusing MEDIA_ENT_T_V4L2_SUBDEV, initialize
new subdev entities as MEDIA_ENT_T_UNKNOWN.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The driver creates two subdevs, one for the image sensor pixel array
(and the related readout logic) and one for an ISP.
The first subdev already uses the MEDIA_ENT_T_V4L2_SUBDEV_SENSOR type,
but the second subdev isn't a sensor pixel array.
So, rename the second subdev as MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This sensor driver is abusing MEDIA_ENT_T_V4L2_SUBDEV, creating
some subdevs with a non-existing type.
As this is a sensor driver, one of the entries is
MEDIA_ENT_T_CAM_SENSOR. The other one will be using
MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN, because the subdev is not
any of the already existing types.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On omap3/omap4/davinci drivers, MEDIA_ENT_T_V4L2_SUBDEV macro is
abused in order to "simplify" the pad checks.
Basically, it does a logical or of this macro, in order to check
for a local index and if the entity is either a subdev or not.
As we'll get rid of MEDIA_ENT_T_V4L2_SUBDEV macro, replace it by
2 << 16 where it occurs, and add a note saying that the code
there is actually a hack.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of relying on media subtype, use the new macros to detect
if an entity is a subdev or an A/V DMA entity.
Please note that most drivers assume that there's just AV_DMA or
V4L2 subdevs. This is not true anymore, as we've added MC support
for DVB, and there are plans to add support for ALSA and FB/DRM
too.
Ok, on the current pipelines supported by those drivers, just V4L
stuff are there, but, assuming that some day a pipeline that also
works with other subsystems will ever added, it is better to add
explicit checks for the AV_DMA stuff.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that interfaces and entities are distinct, it makes no sense
of keeping something named as MEDIA_ENT_T_DEVNODE.
This change was done with this script:
for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DEVNODE_V4L,MEDIA_ENT_T_V4L2_VIDEO, <$i >a && mv a $i; done
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that interfaces got created, we need to fix the entity
namespace.
So, let's create a consistent new namespace and add backward
compatibility macros to keep the old namespace preserved.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Some interfaces indirectly control multiple entities.
Add support for those.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The media device should list the interface objects, so add a linked list
for those interfaces in struct media_device.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that the infrastruct for that is set, add support for
interfaces.
Please notice that we're missing two links:
DVB FE intf -> tuner
DVB demux intf -> dvr
Those should be added latter, after having the entire graph
set. With the current infrastructure, those should be added
at dvb_create_media_graph(), but it would also require some
extra core changes, to allow the function to enumerate the
interfaces.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As we'll be adding other interface types in the future, put the
common interface create code on a separate function.
Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that we have a new graph object called "interfaces", we
need to be able to link them to the entities.
Add a linked list to the interfaces to allow them to be
linked to the entities.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove entity name from the link as this exists only if the object
type is PAD on both link ends.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The media_entity_add_link() function takes an entity
as an argument just to get the list head.
Make it more generic by changing the function argument
to list_head.
No functional changes.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The entire logic that represent graph links were developed on a
time where there were no needs to dynamic remove links. So,
although links are created/removed one by one via some
functions, they're stored as an array inside the entity struct.
As the array may grow, there's a logic inside the code that
checks if the amount of space is not enough to store
the needed links. If it isn't the core uses krealloc()
to change the size of the link, with is bad, as it
leaves the memory fragmented.
So, convert links into a list.
Also, currently, both source and sink entities need the link
at the graph traversal logic inside media_entity. So there's
a logic duplicating all links. That makes it to spend
twice the memory needed. This is not a big deal for today's
usage, where the number of links are not big.
Yet, if during the MC workshop discussions, it was said that
IIO graphs could have up to 4,000 entities. So, we may
want to remove the duplication on some future. The problem
is that it would require a separate linked list to store
the backlinks inside the entity, or to use a more complex
algorithm to do graph backlink traversal, with is something
that the current graph traversal inside the core can't cope
with. So, let's postpone a such change if/when it is actually
needed.
It should also be noticed that the media_link structure uses
44 bytes on 32-bit architectures and 84 bytes on 64-bit
architecture. It will thus be allocated out of the 64-bytes and
96-bytes pools respectively. That's a 12.5% memory waste on
64-bit architectures and 31.25% on 32-bit architecture.
A linked list is less efficient than an array in this case, but
this could later be optimized if we can get rid of the reverse
links (with would reduce memory allocation by 50%).
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Links are graph objects that represent the links of two already
existing objects in the graph.
While with the current implementation, it is possible to create
the links earlier, It doesn't make any sense to allow linking
two objects when they are not both created.
So, remove the code that would be handling those early-created
links and add a BUG_ON() to ensure that.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The smiapp driver creates the pads links before the media entity is
registered with the media device. This doesn't work now that object
IDs are used to create links so the media_device has to be set.
Move entity registration logic before pads links creation.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The uvc driver creates the pads links before the media entity is
registered with the media device. This doesn't work now that obj
IDs are used to create links so the media_device has to be set.
Move entities registration logic before pads links creation.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vsp1 driver initializes the entities and creates the pads links
before the entities are registered with the media device. This doesn't
work now that object IDs are used to create links so the media_device
has to be set.
Split out the pads links creation from the entity initialization so are
made after the entities registration.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vsp1 driver creates the pads links before the media entities are
registered with the media device. This doesn't work now that object
IDs are used to create links so the media_device has to be set.
Move entities registration logic before pads links creation.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The omap3isp driver parses the graph endpoints to know how many subdevices
needs to be registered async and register notifiers callbacks for to know
when these are bound and when the async registrations are completed.
Currently the entities pad are linked with the correct ISP input interface
when the subdevs are bound but it happens before entitities are registered
with the media device so that won't work now that the entity links list is
initialized on device registration.
So instead creating the pad links when the subdevice is bound, create them
on the complete callback once all the subdevices have been bound but only
try to create for the ones that have a bus configuration set during bound.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The omap3isp driver initializes the entities and creates the pads links
before the entities are registered with the media device. This does not
work now that object IDs are used to create links so the media_device
has to be set.
Split out the pads links creation from the entity initialization so the links
are created after the entities have been registered with the media device.
Suggested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Interfaces are different than entities: they represent a
Kernel<->userspace interaction, while entities represent a
piece of hardware/firmware/software that executes a function.
Let's distinguish them by creating a separate structure to
store the interfaces.
Later patches should change the existing drivers and logic
to split the current interface embedded inside the entity
structure (device nodes) into a separate object of the graph.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The struct media_entity has a .parent field that stores a pointer
to the parent struct media_device. But recently a media_gobj was
embedded into the entities and since struct media_gojb already has
a pointer to a struct media_device in the .mdev field, the .parent
field becomes redundant and can be removed.
This patch replaces all the usage of .parent by .graph_obj.mdev so
that field will become unused and can be removed on a later patch.
No functional changes.
The transformation was made using the following coccinelle spatch:
@@
struct media_entity *me;
@@
- me->parent
+ me->graph_obj.mdev
@@
struct media_entity *link;
@@
- link->source->entity->parent
+ link->source->entity->graph_obj.mdev
@@
struct exynos_video_entity *ve;
@@
- ve->vdev.entity.parent
+ ve->vdev.entity.graph_obj.mdev
Suggested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
With the new API, a link can be either between two PADs or between an interface
and an entity. So, we need to use a better name for the function that create
links between two pads.
So, rename the such function to media_create_pad_link().
No functional changes.
This patch was created via this shell script:
for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f) $(find include/ -name '*.h' -type f) ; do sed s,media_entity_create_link,media_create_pad_link,g <$i >a && mv a $i; done
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It helps to check if the media controller is doing the
right thing with the object creation and removal.
No extra code/data will be produced if DEBUG or
CONFIG_DYNAMIC_DEBUG is not enabled.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We can only free the media device after being sure that no
graph object is used.
In order to help tracking it, let's add debug messages
that will print when the media controller gets registered
or unregistered.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Just like entities and pads, links also need to have unique
Object IDs along a given media controller.
So, let's add a media_gobj inside it and initialize
the object then a new link is created.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
PADs also need unique object IDs that won't conflict with
the entity object IDs.
The pad objects are currently created via media_entity_init()
and, once created, never change.
While this will likely change in the future in order to
support dynamic changes, for now we'll keep PADs as arrays
and initialize the media_gobj embedded structs when
registering the entity.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As entities are graph objects, let's embed media_gobj
on it. That ensures an unique ID for entities that can be
global along the entire media controller.
For now, we'll keep the already existing entity ID. Such
field need to be dropped at some point, but for now, let's
not do this, to avoid needing to review all drivers and
the userspace apps.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Due to the MC API proposed changes, we'll need to have an unique
object ID for all graph objects, and have some shared fields
that will be common on all media graph objects.
Right now, the only common object is the object ID, but other
fields will be added later on.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Accessing media_entity ID should now use media_entity_id() macro to
obtain the entity ID, as a next patch will remove the .id field from
struct media_entity .
So, get rid of it, otherwise the omap3isp driver will fail to build.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of accessing directly entity.id, let's create a macro,
as this field will be moved into a common struct later on.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This logic was broken on the original patch, likely due to a
cut-and-paste mistake.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This was depending on broken because we're working at the
Media Controller API, with has... issues.
As this got fixed, we can re-enable it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently, media_entity_init() creates an array with the links,
allocated at init time. It provides a parameter (extra_links)
that would allocate more links than the current needs, but this
is not used by any driver.
As we want to be able to do dynamic link allocation/removal,
we'll need to change the implementation of the links. So,
before doing that, let's first remove that extra unused
parameter, in order to cleanup the interface first.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of seeking for the decoder every time analog stream is
started, cache it. This simplifies the code a little bit.
Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for analog and dvb tv using media controller.
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change to define Media Controller API when CONFIG_MEDIA_CONTROLLER
is enabled. Define stubs for CONFIG_MEDIA_CONTROLLER disabled case.
This will help avoid drivers needing to enclose Media Controller
code within ifdef CONFIG_MEDIA_CONTROLLER block.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add new media controller API to allocate media device as a
device resource. When a media device is created on the main
struct device which is the parent device for the interface
device, it will be available to all drivers associated with
that interface. For example, if a usb media device driver
creates the media device on the main struct device which is
common for all the drivers that control the media device,
including the non-media ALSA driver, media controller API
can be used to share access to the resources on the media
device. This new interface provides the above described
feature. A second interface that finds and returns the media
device is added to allow drivers to find the media device
created by any of the drivers associated with the device.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* patchwork: (204 commits)
[media] rc: sunxi-cir: Initialize the spinlock properly
[media] rtl2832: do not filter out slave TS null packets
[media] rtl2832: print reg number on error case
[media] rtl28xxu: return demod reg page from driver cache
[media] coda: enable MPEG-2 ES decoding
[media] coda: don't start streaming without queued buffers
[media] coda: hook up vidioc_prepare_buf
[media] coda: relax coda_jpeg_check_buffer for trailing bytes
[media] coda: make to_coda_video_device static
[media] s5p-mfc: remove volatile attribute from MFC register addresses
[media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
[media] s5p-mfc: use spinlock to protect MFC context
[media] s5p-mfc: remove unnecessary callbacks
[media] s5p-mfc: make queue cleanup code common
[media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
[media] s5p-mfc: constify s5p_mfc_codec_ops structures
[media] au8522: Avoid memory leak for device config data
[media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
[media] uvcvideo: small cleanup in uvc_video_clock_update()
[media] uvcvideo: Fix reading the current exposure value of UVC
...
LED subsystem shifted responsibility for choosing between SYNC or ASYNC
way of setting brightness from drivers to the caller. Adapt the wrapper
to those changes.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: linux-media@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
omapfb's private copy of omapdss is now ready to be used.
This patch makes omapfb use its private omapdss and display drivers, and
also makes omap_vout (which uses omapfb) to depend on omapfb.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
The driver allocates the spinlock but fails to initialize it correctly.
The kernel reports a BUG indicating bad spinlock magic when spinlock
debugging is enabled.
Call spin_lock_init() on it to initialize it correctly.
Fixes: b4e3e59fb5 ("[media] rc: add sunxi-ir driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Do not remove slave TS NULL padding PID (0x1fff) by default as
there is no real need. After that whole TS is passed to kernel sw
PID filter.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It is hard to debug possible I2C failures without knowing the
possible register itself. Add register number to error printing.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Return current active rtl2830/rtl2832 register page from the driver
cache in order to reduce I2C I/O. Register page is already cached
due to I2C write needs.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas