Pull x86 MPX support from Thomas Gleixner:
"This enables support for x86 MPX.
MPX is a new debug feature for bound checking in user space. It
requires kernel support to handle the bound tables and decode the
bound violating instruction in the trap handler"
* 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
asm-generic: Remove asm-generic arch_bprm_mm_init()
mm: Make arch_unmap()/bprm_mm_init() available to all architectures
x86: Cleanly separate use of asm-generic/mm_hooks.h
x86 mpx: Change return type of get_reg_offset()
fs: Do not include mpx.h in exec.c
x86, mpx: Add documentation on Intel MPX
x86, mpx: Cleanup unused bound tables
x86, mpx: On-demand kernel allocation of bounds tables
x86, mpx: Decode MPX instruction to get bound violation information
x86, mpx: Add MPX-specific mmap interface
x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific
x86, mpx: Add MPX to disabled features
ia64: Sync struct siginfo with general version
mips: Sync struct siginfo with general version
mpx: Extend siginfo structure to include bound violation information
x86, mpx: Rename cfg_reg_u and status_reg
x86: mpx: Give bndX registers actual names
x86: Remove arbitrary instruction size limit in instruction decoder
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- 'Nested Sleep Debugging', activated when CONFIG_DEBUG_ATOMIC_SLEEP=y.
This instruments might_sleep() checks to catch places that nest
blocking primitives - such as mutex usage in a wait loop. Such
bugs can result in hard to debug races/hangs.
Another category of invalid nesting that this facility will detect
is the calling of blocking functions from within schedule() ->
sched_submit_work() -> blk_schedule_flush_plug().
There's some potential for false positives (if secondary blocking
primitives themselves are not ready yet for this facility), but the
kernel will warn once about such bugs per bootup, so the warning
isn't much of a nuisance.
This feature comes with a number of fixes, for problems uncovered
with it, so no messages are expected normally.
- Another round of sched/numa optimizations and refinements, for
CONFIG_NUMA_BALANCING=y.
- Another round of sched/dl fixes and refinements.
Plus various smaller fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched: Add missing rcu protection to wake_up_all_idle_cpus
sched/deadline: Introduce start_hrtick_dl() for !CONFIG_SCHED_HRTICK
sched/numa: Init numa balancing fields of init_task
sched/deadline: Remove unnecessary definitions in cpudeadline.h
sched/cpupri: Remove unnecessary definitions in cpupri.h
sched/deadline: Fix rq->dl.pushable_tasks bug in push_dl_task()
sched/fair: Fix stale overloaded status in the busiest group finding logic
sched: Move p->nr_cpus_allowed check to select_task_rq()
sched/completion: Document when to use wait_for_completion_io_*()
sched: Update comments about CLONE_NEWUTS and CLONE_NEWIPC
sched/fair: Kill task_struct::numa_entry and numa_group::task_list
sched: Refactor task_struct to use numa_faults instead of numa_* pointers
sched/deadline: Don't check CONFIG_SMP in switched_from_dl()
sched/deadline: Reschedule from switched_from_dl() after a successful pull
sched/deadline: Push task away if the deadline is equal to curr during wakeup
sched/deadline: Add deadline rq status print
sched/deadline: Fix artificial overrun introduced by yield_task_dl()
sched/rt: Clean up check_preempt_equal_prio()
sched/core: Use dl_bw_of() under rcu_read_lock_sched()
sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu
...
Note that the code _using_ ->msg_iter at that point will be very
unhappy with anything other than unshifted iovec-backed iov_iter.
We still need to convert users to proper primitives.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To improve recovery speed, f2fs try to readahead many contiguous blocks in warm
node segment, but for most time, abnormal power-off do not occur frequently, so
when mount a normal power-off f2fs image, by contrary ra so many blocks and then
invalid them will hurt the performance of mount.
It's better to just ra the first next-block for normal condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch does cleanup work, it introduces is_valid_blkaddr() to include
verification code for blkaddr with upper and down boundary value which were in
ra_meta_pages previous.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1.We use zero as upper boundary value for ra SSA/CP blocks, we will skip
readahead as verification failure with max number, it causes low performance.
2.Low boundary value is not accurate for SSA/CP/POR region verification, so
these values need to be redefined.
This patch fixes above issues.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As inline_{dir,inode} stat is increased/decreased concurrently by multi threads,
so the value is not so accurate, let's use atomic type for counting accurately.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added some commentaries for code readability and cleaned up if-statement
clearly.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode state is dirty, go straight to write.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The inmemory pages should be handled by invalidate_page since it needs to be
released int the truncation path.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_read_inode, if we failed __recover_inline_status, the inode has inline
flag without increasing its count.
Later, f2fs_evict_inode will decrease the count, which causes -1.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revists retrial paths in f2fs.
The basic idea is to use cond_resched instead of retrying from the very early
stage.
Suggested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
file->private_data can never be null after calling initiate_cifs_search.
So private null check condition is not needed.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
A user complained that they were unable to login to their cifs share
after a kernel update. From the wiretrace we can see that the server
returns different UIDs as response to NTLMSSP_NEGOTIATE and NTLMSSP_AUTH
phases.
With changes in the authentication code, we no longer set the
cifs_sess->Suid returned in response to the NTLM_AUTH phase and continue
to use the UID sent in response to the NTLMSSP_NEGOTIATE phase. This
results in the server denying access to the user when the user attempts
to do a tcon connect.
See https://bugzilla.redhat.com/show_bug.cgi?id=1163927
A test kernel containing patch was tested successfully by the user.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
The useful macros embed message level in the name. Thus, it cleans up the code
a bit. In cases when it was plain printk() the conversion was done to info
level.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
This patch converts custom dumper to use native print_hex_dump() instead. The
cifs_dump_mem() will have an offsets per each line which differs it from the
original code.
In the dump_smb() we may use native print_hex_dump() as well. It will show
slightly different output in ASCII part when character is unprintable,
otherwise it keeps same structure.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Meanwhile it cleans up the code, the behaviour is slightly changed. In case of
providing non-boolean value it will fails with corresponding error. In the
original code the attempt of an update was just ignored in such case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Add missing defines needed for ACL query support.
For definitions of these security info type additionalinfo flags
and also the EA Flags see MS-SMB2 (2.2.37) or MS-DTYP
Signed-of-by: Steven French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
In many cases the simple fallocate call is
a no op (since the file is already not sparse) or
can simply be converted from a sparse to a non-sparse
file if we are fallocating the whole file and keeping
the size.
Signed-off-by: Steven French <smfrench@gmail.com>
This patch tries to fix:
BUG: using smp_processor_id() in preemptible [00000000] code: f2fs_gc-254:0/384
(radix_tree_node_alloc+0x14/0x74) from [<c033d8a0>] (radix_tree_insert+0x110/0x200)
(radix_tree_insert+0x110/0x200) from [<c02e8264>] (gc_data_segment+0x340/0x52c)
(gc_data_segment+0x340/0x52c) from [<c02e8658>] (f2fs_gc+0x208/0x400)
(f2fs_gc+0x208/0x400) from [<c02e8a98>] (gc_thread_func+0x248/0x28c)
(gc_thread_func+0x248/0x28c) from [<c0139944>] (kthread+0xa0/0xac)
(kthread+0xa0/0xac) from [<c0105ef8>] (ret_from_fork+0x14/0x3c)
The reason is that f2fs calls radix_tree_insert under enabled preemption.
So, before calling it, we need to call radix_tree_preload.
Otherwise, we should use _GFP_WAIT for the radix tree, and use mutex or
semaphore to cover the radix tree operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previoulsy, we used rwlock for nat_entry lock.
But, now we have a lot of complex operations in set_node_addr.
(e.g., allocating kernel memories, handling radix_trees, and so on)
So, this patches tries to change spinlock to rw_semaphore to give CPUs to other
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
a) don't bother with ->d_time for positives - we only check it for
negatives anyway.
b) make sure to set it at unlink and rmdir time - at *that* point
soon-to-be negative dentry matches then-current directory contents
c) don't go into renaming of old alias in vfat_lookup() unless it
has the same parent (which it will, unless we are seeing corrupted
image)
[hirofumi@mail.parknet.co.jp: make change minimum, don't call d_move() for dir]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <stable@vger.kernel.org> [3.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there are many inodes that have data blocks in victim segment,
it takes long time to find a inode in gc_inode list.
Let's use radix_tree to reduce lookup time.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we're enabling journal features, we cannot use the predicate
jbd2_journal_has_csum_v2or3() because we haven't yet set the sb
feature flag fields! Moreover, we just finished loading the shash
driver, so the test is unnecessary; calculate the seed always.
Without this patch, we fail to initialize the checksum seed the first
time we turn on journal_checksum, which means that all journal blocks
written during that first mount are corrupt. Transactions written
after the second mount will be fine, since the feature flag will be
set in the journal superblock. xfstests generic/{034,321,322} are the
regression tests.
(This is important for 3.18.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.coM>
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've already made fi and sbi for inode. Let's avoid duplicated work.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix the wrong error number in error path of f2fs_write_begin.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don Bailey noticed that our page zeroing for compression at end-io time
isn't complete. This reworks a patch from Linus to push the zeroing
into the zlib and lzo specific functions instead of trying to handle the
corners inside btrfs_decompress_buf2page
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reported-by: Don A. Bailey <donb@securitymouse.com>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Little cleanup to distinguish each phase easily
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: modify indentation for code readability]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
These patches fixes for iostats and SETCLIENTID in addition to cleaning
up the nfs4_init_callback() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PMdS
-----END PGP SIGNATURE-----
Merge tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next
Pull pull additional NFS client changes for 3.19 from Anna Schumaker:
"NFS: Generic client side changes from Chuck
These patches fixes for iostats and SETCLIENTID in addition to cleaning
up the nfs4_init_callback() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"
* tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
NFS: Clean up nfs4_init_callback()
NFS: SETCLIENTID XDR buffer sizes are incorrect
SUNRPC: serialize iostats updates
Pull nfsd bugfixes from Bruce Fields:
"These fix one mishandling of the case when security labels are
configured out, and two races in the 4.1 backchannel code"
* 'for-3.18' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix slot wake up race in the nfsv4.1 callback code
SUNRPC: Fix locking around callback channel reply receive
nfsd: correctly define v4.2 support attributes
Pull aio fix from Ben LaHaise:
"Dirty page accounting fix for aio"
* git://git.kvack.org/~bcrl/aio-fixes:
aio: fix uncorrent dirty pages accouting when truncating AIO ring buffer
If an inode has converted inline_data which was written to the disk, we should
set its inode flag for further fsync so that this inline_data can be recovered
from sudden power off.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After flushing dirty nat entries, it has to be no more dirty nat
entries.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's meaningless to check dirty_nat_cnt after re-dirtying nat entries in
journal. And although there are rooms for dirty nat entires if dirty_nat_cnt
is zero, it's also meaningless to check __has_cursum_space.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds support for using the NFS v4.2 operation DEALLOCATE to
punch holes in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch adds support for using the NFS v4.2 operation ALLOCATE to
preallocate data in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs4_init_callback() is never invoked for NFS versions other than 4.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use the correct calculation of the maximum size of a clientaddr4
when encoding and decoding SETCLIENTID operations. clientaddr4 is
defined in section 2.2.10 of RFC3530bis-31.
The usage in encode_setclientid_maxsz is missing the 4-byte length
in both strings, but is otherwise correct. decode_setclientid_maxsz
simply asks for a page of receive buffer space, which is
unnecessarily large (more than 4KB).
Note that a SETCLIENTID reply is either clientid+verifier, or
clientaddr4, depending on the returned NFS status. It doesn't
hurt to allocate enough space for both.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A deadlock can be occurred:
Thread 1] Thread 2]
- f2fs_write_data_pages - f2fs_write_begin
- lock_page(page #0)
- grab_cache_page(page #X)
- get_node_page(inode_page)
- grab_cache_page(page #0)
: to convert inline_data
- f2fs_write_data_page
- f2fs_write_inline_data
- get_node_page(inode_page)
In this case, trying to lock inode_page and page #0 causes deadlock.
In order to avoid this, this patch adds a rule for this locking policy,
which is that page #0 should be locked followed by inode_page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two jump labels were adjusted in the implementation of the
create_node_manager_caches() function because these identifiers
contained typos.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Define and use nfs_inc_fscache_stats when plus one, which can save to
pass one parameter.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The nfs_put_client() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
LOCKD_DEBUG is always the same value as CONFIG_SUNRPC_DEBUG, so we can
just use it instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs4_layoutget_release() drops layout hdr refcnt. Grab the refcnt
early so that it is safe to call .release in case nfs4_alloc_pages
fails.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Fixes: a47970ff78 ("NFSv4.1: Hold reference to layout hdr in layoutget")
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Recent work in the pgio layer made it possible for there to be more than one
request per page. This caused a subtle change in commit behavior, because
write.c:nfs_commit_unstable_pages compares the number of *pages* waiting for
writeback against the number of requests on a commit list to choose when to
send a COMMIT in a non-blocking flush.
This is probably hard to hit in normal operation - you have to be using
rsize/wsize < PAGE_SIZE, or pnfs with lots of boundaries that are not page
aligned to have a noticeable change in behavior.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use the number of pages in the pagecache mapping instead of the
number of pnfs requests which is only slightly related.
Reported-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This should make the code easier to maintain in the future.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS4ERR_ACCESS has number 13 and thus is matched and returned
immediately at the beginning of nfs4_map_errors() and there's no point
in checking it later.
Coverity-id: 733891
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In f2fs_evict_inode,
commit_inmemory_pages
f2fs_gc
f2fs_iget
iget_locked
-> wait for inode free
Here, if the inode is same as the one to be evicted, f2fs should wait forever.
Actually, we should not call f2fs_balance_fs during f2fs_evict_inode to avoid
this.
But, the commit_inmem_pages calls f2fs_balance_fs by default, even if
f2fs_evict_inode wants to free inmemory pages only.
Hence, this patch adds to trigger f2fs_balance_fs only when there is something
to write.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It used nat_entry_set when create slab for sit_entry_set.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull btrfs deadlock fix from Chris Mason:
"This has a fix for a long standing deadlock that we've been trying to
nail down for a while. It ended up being a bad interaction with the
fair reader/writer locks and the order btrfs reacquires locks in the
btree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix lockups from btrfs_clear_path_blocking
"The biggest change is to rename the filesystem from "overlayfs" to "overlay".
This will allow legacy overlayfs to be easily carried by distros alongside the
new mainline one. Also fix a couple of copy-up races and allow escaping comma
character in filenames."
The last bit is about commas in pathname mount options...
Check against !OVL_PATH_LOWER instead of OVL_PATH_MERGE. For a copied up
directory the two are currently equivalent.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Pass dentry into ovl_dir_read_merged() insted of upperpath and lowerpath.
This cleans up callers and paves the way for multi-layer directory reads.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Xattr operations can race with copy up. This does not matter as long as
we consistently fiter out "trunsted.overlay.opaque" attribute on upper
directories.
Previously we checked parent against OVL_PATH_MERGE. This is too general,
and prone to race with copy-up. I.e. we found the parent to be on the
lower layer but ovl_dentry_real() would return the copied-up dentry,
possibly with the "opaque" attribute.
So instead use ovl_path_real() and decide to filter the attributes based on
the actual type of the dentry we'll use.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
ovl_remove_and_whiteout() needs to check if upper dentry exists or not
after having locked upper parent directory.
Previously we used a "type" value computed before locking the upper parent
directory, which is susceptible to racing with copy-up.
There's a similar check in ovl_check_empty_and_clear(). This one is not
actually racy, since copy-up doesn't change the "emptyness" property of a
directory. Add a comment to this effect, and check the existence of upper
dentry locally to make the code cleaner.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Some distributions carry an "old" format of overlayfs while mainline has a
"new" format.
The distros will possibly want to keep the old overlayfs alongside the new
for compatibility reasons.
To make it possible to differentiate the two versions change the name of
the new one from "overlayfs" to "overlay".
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Andy Whitcroft <apw@canonical.com>
In ->atomic_open(inode, dentry, file, opened) calling finish_no_open(file, NULL)
is equivalent to dget(dentry); return finish_no_open(file, dentry);
No need to open-code that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
vfree() is allowed under spinlock these days, but it's cheaper when
it doesn't step into deferred case and here it's very easy to avoid.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
dentry is always hashed and negative, inode - non-error, non-NULL and
non-directory. In such conditions d_splice_alias() is equivalent to
"d_instantiate(dentry, inode) and return NULL", which simplifies the
downstream code and is consistent with the "have to create a new object"
case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If a node page is request to be written during the reclaiming path, we should
submit the bio to avoid pending to recliam it.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.
/* for inner inode cache management */
struct inode_management {
struct radix_tree_root ino_root; /* ino entry array */
spinlock_t ino_lock; /* for ino entry lock */
struct list_head ino_list; /* inode list head */
unsigned long ino_num; /* number of entries */
};
struct f2fs_sb_info {
...
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
...
}
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Because we have checked the contrary condition in case of "if" judgment, we do
not need to check the condition again in case of "else" judgment. Let's remove
it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new
option is set without BG_GC, then if any error occurred in the following
procedure, we can restore to start the gc thread.
But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is
not set in new option, so we'd better move this condition judgment out of
start_gc_thread to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The iput() function was called in up to three cases by the udf_fill_super()
function during error handling even if the passed data structure element
contained still a null pointer. This implementation detail could be improved
by the introduction of another jump label.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
A process may exit, leaving an orphan lock in the lockspace.
This adds the capability for another process to acquire the
orphan lock. Acquiring the orphan just moves the lock from
the orphan list onto the acquiring process's list of locks.
An adopting process must specify the resource name and mode
of the lock it wants to adopt. If a matching lock is found,
the lock is moved to the caller's 's list of locks, and the
lkid of the lock is returned like the lkid of a new lock.
If an orphan with a different mode is found, then -EAGAIN is
returned. If no orphan lock is found on the resource, then
-ENOENT is returned. No async completion is used because
the result is immediately available.
Also, when orphans are purged, allow a zero nodeid to refer
to the local nodeid so the caller does not need to look up
the local nodeid.
Signed-off-by: David Teigland <teigland@redhat.com>
The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no
locking in order to guarantee atomicity, and so allows for races of
the form.
Task 1 Task 2
====== ======
if (test_and_set_bit(0) != 0) {
clear_bit(0)
rpc_wake_up_next(queue)
rpc_sleep_on(queue)
return false;
}
This patch breaks the race condition by adding a retest of the bit
after the call to rpc_sleep_on().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The fair reader/writer locks mean that btrfs_clear_path_blocking needs
to strictly follow lock ordering rules even when we already have
blocking locks on a given path.
Before we can clear a blocking lock on the path, we need to make sure
all of the locks have been converted to blocking. This will remove lock
inversions against anyone spinning in write_lock() against the buffers
we're trying to get read locks on. These inversions didn't exist before
the fair read/writer locks, but now we need to be more careful.
We papered over this deadlock in the past by changing
btrfs_try_read_lock() to be a true trylock against both the spinlock and
the blocking lock. This was slower, and not sufficient to fix all the
deadlocks. This patch adds a btrfs_tree_read_lock_atomic(), which
basically means get the spinlock but trylock on the blocking lock.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: Patrick Schmid <schmid@phys.ethz.ch>
cc: stable@vger.kernel.org #v3.15+
With the isofs_hash() function removed, isofs_hash_ms() is the only user
of isofs_hash_common(), but it's defined inside of an #ifdef, which triggers
this gcc warning in ARM axm55xx_defconfig starting with v3.18-rc3:
fs/isofs/inode.c:177:1: warning: 'isofs_hash_common' defined but not used [-Wunused-function]
This patch moves the function inside of the same #ifdef section to avoid that
warning, which seems the best compromise of a relatively harmless patch for
a late -rc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b0afd8e5db ("isofs: don't bother with ->d_op for normal case")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In "d_prune_alias(): just lock the parent and call __dentry_kill()" the old
dget + d_drop + dput has been replaced with lock_parent + __dentry_kill;
unfortunately, dput() does more than just killing dentry - it also drops the
reference to parent. New variant leaks that reference and needs dput(parent)
after killing the child off.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull the beginning of seq_file cleanup from Steven:
"I'm looking to clean up the seq_file code and to eventually merge the
trace_seq code with seq_file as well, since they basically do the same thing.
Part of this process is to remove the return code of seq_printf() and friends
as they are rather inconsistent. It is better to use the new function
seq_has_overflowed() if you want to stop processing when the buffer
is full. Note, if the buffer is full, the seq_file code will throw away
the contents, allocate a bigger buffer, and then call your code again
to fill in the data. The only thing that breaking out of the function
early does is to save a little time which is probably never noticed.
I started with patches from Joe Perches and modified them as well.
There's many more places that need to be updated before we can convert
seq_printf() and friends to return void. But this patch set introduces
the seq_has_overflowed() and does some initial updates."
This patch fixes kmemcheck warning in switch_names. The function
switch_names swaps inline names of two dentries. It swaps full arrays
d_iname, no matter how many bytes are really used by the strings. Reading
data beyond string ends results in kmemcheck warning.
We fix the bug by marking both arrays as fully initialized.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v3.15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... for situations when we don't have any candidate in pathnames - basically,
in descriptor-based syscalls.
[Folded the build fix for !CONFIG_AUDITSYSCALL configs from Chen Gang]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds