Make these const as they are only stored in the type field of a device
structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1503130946-2854-2-git-send-email-bhumirks@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
On Deverton server, the P2SB PCI device (DEV:1F, FUN:1) is used by multiple
device drivers.
If it's hidden by some device driver (e.g. with the i801 I2C driver,
the commit
9424693035 ("i2c: i801: Create iTCO device on newer Intel PCHs")
unconditionally hid the P2SB PCI device wrongly) it will make the
pnd2_edac driver read out an invalid BAR value of 0xffffffff and then
fail on ioremap().
Therefore, store the presence state of P2SB PCI device before unhiding
it for reading BAR and restore the presence state after reading BAR.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-i2c@vger.kernel.org
Link: http://lkml.kernel.org/r/20170814154845.21663-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Bit[0] of BAR is always zero. Bit[2:1] and bit[3] of BAR contain the
information of 'type' and the 'prefetchable' accordingly. Therefore,
mask the lower four bits to retrieve the actual base address of a BAR.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170814154813.21619-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
I've been waing a long time for the generic sideband driver to
appear. Patience has run out, so include the minimum here to
just read registers.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Patrick Geary <patrickg@supermicro.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170803210536.5662-1-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Basically, there are full memory mirroring and address range partial
memory mirroring (supported by Haswell EX and Broadwell EX) modes.
a) In full memory mirroring, the memory behind each memory controller
is mirrored, i.e. the memory is split into two identical mirrors
(primary and secondary), half of the memory is reserved for redundancy.
b) In address range partial memory mirroring, the memory size (range)
of primary and secondary behind each memory controller can be user
defined by the TAD0 register. The rest of memory ranges defined by
TAD1/TAD2/... in that memory controller are non-mirrored.
For more detail on memory mirroring, see the following link written by Tony Luck:
https://01.org/lkp/blogs/tonyluck/2016/address-range-partial-memory-mirroring-linux
Currently the sb_edac driver only supports address decoding in full
memory mirroring and non-mirroring modes. In address range partial
memory mirroring mode, it may fail to decode an address that falls in a
non-mirroring area (the following was one of this kind of failed logs).
mce: Uncorrected hardware memory error in user-access at 566d53a400
Memory failure: 0x566d53a: Killing einj_mem_uc:4647 due to hardware memory corruption
Memory failure: 0x566d53a: recovery action for dirty LRU page: Recovered
mce: [Hardware Error]: Machine check events logged
EDAC sbridge MC1: HANDLING MCE MEMORY ERROR
EDAC sbridge MC1: CPU 48: Machine Check Event: 0 Bank 7: ec00000000010090
EDAC sbridge MC1: TSC 4b914aa5a99dab
EDAC sbridge MC1: ADDR 566d53a400
EDAC sbridge MC1: MISC 1443a0c86
EDAC sbridge MC1: PROCESSOR 0:406f1 TIME 1499712764 SOCKET 2 APIC 80
EDAC MC1: 0 UE Can't discover the memory rank for ch addr 0x7fb54e900 on any memory ( page:0x0 offset:0x0 grain:32)
mce: [Hardware Error]: Machine check events logged
Therefore, classify memory mirroring modes and make the address decoding
in address range partial memory mode correct.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170730180651.30060-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing of
the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170718214339.7774-19-robh@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
It is a write-only variable so get rid of it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Loc Ho <lho@apm.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Using the homegrown amd_get_nb_id() to find a node ID on AMD was fine
while the L3 to node mapping was 1:1. And Zen topology broke this. So
let's start slowly moving away from it and use the topology interfaces
instead.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1490041614-90057-2-git-send-email-Yazen.Ghannam@amd.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Non-existent or empty DIMM slots result in error return from
RD_REGP(). But we shouldn't give up on failure.
So long as we find at least one DIMM we can continue.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170628234407.21521-1-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The function sbi_send() is local to just pnd2_edac.c and does not need
to be in global scope, so make it static.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170623084855.9197-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add code comment to make it clear that the fall-through is intentional
and, OR ret with its previous value to avoid overwriting it so that
callers can check the correct return value.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170622220535.GA4896@embeddedgus
[ Massage a bit. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Use of_address_to_resource() and resource_size() instead of manually
parsing the "reg" property from the "memory" node(s).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170606235500.22772-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Xiaolong Ye reported the following failure on Broadwell D server:
EDAC sbridge: Some needed devices are missing
EDAC MC: Removed device 0 for sbridge_edac.c Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
Broadwell D (only IMC0 per socket) and Broadwell X (IMC0 and IMC1 per
socket) use the same PCI device IDs for IMC0 per socket, then they
share pci_dev_descr_broadwell_table (n_imcs_per_sock=2). In this case,
Broadwell D wrongly creates the nonexistent SOCK EDAC memory controller
and reports above error messages, since it has no IMC1 per socket.
Avoid creating the nonexistent SOCK memory controller.
Reported-and-tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170608113351.25323-1-qiuxu.zhuo@intel.com
[ Massage. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
edac_op_state is a module parameter which affects the behaviour of
the driver probe which can potentially be invoked as soon as the
platform driver registration happens. Because of this we need to
ensure that we sanity check the module parameter before calling
platform_register_drivers().
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170607215530.8604-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Compare the number of debugfs entries created by
thunderx_create_debugfs_nodes() with the requested number of entries to
properly determine whether to print a warning.
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20170531155157.93583-1-stemerkhanov@cavium.com
Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Check the return status of platform_driver_register() in
mv64x60_edac_init(). Only output messages and initialise the
edac_op_state if the registration is successful.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170529212142.25572-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Kaby Lake seems to work just like Skylake.
Reported-and-tested-by: Doug Thompson <bc.tdw@recursor.net>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1495823683-32569-1-git-send-email-jbaron@akamai.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Collapse 'case:' in *_mci_bind_devs() and update driver version from
1.1.1 to 1.1.2.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000934.87971-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This is based on previous work by Patrick Geary, see Link.
Additional cleanups ontop:
- Remove the code to read MCMTR from pci_ha1_ta and CHN_TO_HA macro,
now that TA0 and TA1 are unified.
- Remove get_pdev_same_bus(), since in get_dimm_config() the
variable "pvt->pci_ta" for KNL is also ready, we can simply use
pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr) to read
MCMTR.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/57884350.1030401@supermicro.com
Link: http://lkml.kernel.org/r/20170523000910.87925-1-qiuxu.zhuo@intel.com
[ Make __populate_dimms() return int. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
We don't need this quirk anymore now that the EDAC memory controller
representation matches the hardware.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000834.87881-1-qiuxu.zhuo@intel.com
[ Commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Tony pointed out: "currently the driver pretends there is one big
8-channel memory controller per socket instead of 2 4-channel
controllers. This is fine with all memory controller populated with
symmetrical DIMM configurations, but runs into difficulties on
asymmetrical setups".
Restructure the driver to assign an EDAC memory controller to each real
h/w memory controller to resolve the issue.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000731.87793-1-qiuxu.zhuo@intel.com
[ Break some lines at convenient points. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
EDAC assigns logical memory controller numbers in the order that we find
memory controllers, which depends on which PCI bus they are on. Some
systems end up with MC0 on socket0, others (e.g Haswell) have MC0 on
socket3.
All this is made more confusing for users because we use the string
"Socket" while generating names for memory controllers, but the number
that we attach there is the memory controller number. E.g.
EDAC MC0: Giving out device to module sbridge_edac.c controller
Haswell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)
Change the names to say "SrcID#%d" (where the number we use is read from
the h/w associated with the memory controller instead of some logical
number internal to the EDAC driver). New message:
EDAC MC0: Giving out device to module sbridge_edac.c controller
Haswell SrcID#3: DEV 0000:ff:12.0 (INTERRUPT)
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Reported-by: Patrick Geary <patrickg@supermicro.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000603.87748-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Each of the PCI device IDs belongs to a CPU socket, or to one of the
integrated memory controllers. Provide an enum to specify the domain of
each, and distinguish the resource number in each domain: the number
of the PCI device IDs per integrated memory controller/socket, and the
number of integrated memory controllers per socket.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000533.87704-1-qiuxu.zhuo@intel.com
[ Realign pci_dev_descr_knl members. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170524133505.1233-1-tklauser@distanz.ch
Signed-off-by: Borislav Petkov <bp@suse.de>
The wrong index into the csbases/csmasks arrays was being passed to
the function to compute the chip select sizes, which resulted in the
wrong size being computed. Address that so that the correct values are
computed and printed.
Also, redo how we calculate the number of pages in a CS row.
Reported-by: Benjamin Bennett <benbennett@gmail.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@vger.kernel.org> # 4.10.x
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com
[ Remove unneeded integer math comment, minor cleanups. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Leave it to the user to decide whether to enable this or not. Otherwise,
platform-specific drivers won't initialize (currently, EDAC supports
only a single platform driver loaded).
Signed-off-by: Borislav Petkov <bp@suse.de>
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.
While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org
Use mc_devices list instead to check whether we have EDAC driver
instances successfully registered with EDAC core.
Signed-off-by: Borislav Petkov <bp@suse.de>
Apparently, some machines used to report DRAM errors through a PCI SERR
NMI. This is why we have a call into EDAC in the NMI handler. See
c0d1217202 ("drivers/edac: add new nmi rescan").
From looking at the patch above, that's two drivers: e752x_edac.c and
e7xxx_edac.c. Now, I wanna say those are old machines which are probably
decommissioned already.
Tony says that "[t]the newest CPU supported by either of those drivers
is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some
folks are still using these ... but people that hold onto h/w for 7
years generally cling to old s/w too ... so I'd guess it unlikely that
we will get complaints for breaking these in upstream."
So even if there is a small number still in use, we did load EDAC with
edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact)
which means a default EDAC setup without any parameters supplied on the
command line or otherwise would never even log the error in the NMI
handler because we're polling by default:
inline int edac_handler_set(void)
{
if (edac_op_state == EDAC_OPSTATE_POLL)
return 0;
return atomic_read(&edac_handlers);
}
So, long story short, I'd like to get rid of that nastiness called
edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If
we ever have to do stuff like that again, it should be notifiers we're
using and not some insanity like this one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
The peripherals' RAS functionality only exist on the Arria10 SoCFPGA.
The Cyclone5 initialization generates EDAC warnings when the peripherals
aren't found in the device tree. Fix by checking for Arria10 in the init
functions.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1491415262-5018-1-git-send-email-thor.thayer@linux.intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
DIMM number passed to edac_mc_handle_error() was accidentally hardcoded
to zero. Pass in the correct daddr->dimm value.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Provide debugfs function stubs when EDAC_DEBUG is not enabled so that we
don't fail the build:
drivers/edac/pnd2_edac.c: In function ‘pnd2_init’:
drivers/edac/pnd2_edac.c:1521:2: error: implicit declaration of function ‘setup_pnd2_debug’ [-Werror=implicit-function-declaration]
setup_pnd2_debug();
^
drivers/edac/pnd2_edac.c: In function ‘pnd2_exit’:
drivers/edac/pnd2_edac.c:1529:2: error: implicit declaration of function ‘teardown_pnd2_debug’ [-Werror=implicit-function-declaration]
teardown_pnd2_debug();
^
Signed-off-by: Borislav Petkov <bp@suse.de>
Initial target for this driver is the Intel Apollo Lake platform and
Denverton micro-server, they use the same internal memory controller IP
called Pondicherry2.
Memory controller registers are not in PCI config space like earlier
Intel memory controllers. For Apollo Lake platform they are accessed via
a "side-band" interface, for Denverton micro-server they are access via
PCI config space and memory map I/O. This driver is for Apollo Lake and
Denverton, but only the Denverton is fully enabled while we wait for the
sideband driver.
Apollo lake driver and initial cut at Denverton driver by Tony Luck.
Extensive cleanup, refactoring and basic verification by Qiuxu Zhuo.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170308174539.14432-1-qiuxu.zhuo@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used
as if it returned a boolean true if the width if 8. Fix the tests where
MTR_DRAM_WIDTH is misused.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix spelling mistake in dev_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Loc Ho <lho@apm.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170223002609.9440-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- Assign notifier chain priorities for all RAS related handlers to
make the ordering explicit (Borislav Petkov)
- Improve the AMD MCA banks sysfs output (Yazen Ghannam)
- Various cleanups and restructuring of the x86 RAS code (Borislav
Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority
x86/ras: Get rid of mce_process_work()
EDAC/mce/amd: Dump TSC value
EDAC/mce/amd: Unexport amd_decode_mce()
x86/ras/amd/inj: Change dependency
x86/ras: Flip the TSC-adding logic
x86/ras/amd: Make sysfs names of banks more user-friendly
x86/ras/therm_throt: Do not log a fake MCE for thermal events
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
Currently, the IPID and Syndrome are printed on the same line as the
Address. There are cases when we can have a valid Syndrome but not a
valid Address.
For example, the MCA_SYND register can be used to hold more detailed
error info that the hardware folks can use. It's not just DRAM ECC
syndromes. There are some error types that aren't related to memory that
may have valid syndromes, like some errors related to links in the Data
Fabric, etc.
In these cases, the IPID and Syndrome are not printed at the same log
level as the rest of the stanza, so users won't see them on the console.
Console:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Dmesg:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
, Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Print the IPID first and on a new line. The IPID should always be
printed on SMCA systems. The Syndrome will then be printed with the IPID
and at the same log level when valid:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
[Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Last time we did that was when we enabled Bulldozer. Now, we enabled Zen
so it is only natural ... :-)
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Fix the following sparse warnings:
drivers/edac/fsl_ddr_edac.c:148:1: warning:
symbol 'dev_attr_inject_data_hi' was not declared. Should it be static?
drivers/edac/fsl_ddr_edac.c:150:1: warning:
symbol 'dev_attr_inject_data_lo' was not declared. Should it be static?
drivers/edac/fsl_ddr_edac.c:152:1: warning:
symbol 'dev_attr_inject_ctrl' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170209150424.15124-1-weiyj.lk@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The L2 cache controller on the T2080 SoC has similar capabilities to the
others already supported by the mpc85xx_edac driver. Add it to the list
of compatible devices.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: devicetree@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170201231624.28843-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
Match one of the devices in amd64_cpuids[] before loading the module.
This is an additional sanity check against users trying to load
amd64_edac_mod on unsupported systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485537863-2707-9-git-send-email-Yazen.Ghannam@amd.com
[ Get rid of err_ret label, make it a bit more readable this way. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Having ECC disabled on a node doesn't necessarily mean that it's
disabled for the entire system. So let's return a non-failing code when
ECC is disabled on a node. This way we can skip initialization for the
node but still continue with the remaining nodes.
After probing all instances, make sure we have at least one MC device
allocated.
This issue is seen and fix tested on Fam15h and Fam17h MCM systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485537863-2707-8-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Print the node number when informing that DRAM ECC is disabled so
that we can show which nodes have DRAM ECC disabled. Also, print more
detailed system information as edac_dbg(), so as to not bother general
users.
Switch amd64_notice to amd64_info to match the message above it.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485537863-2707-5-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We have a few functions that register/unregister an ECC error decoding
routine. These functions are called when we init/remove instances.
However, they are global and so don't need to be registered/unregistered
multiple times.
So move them out of the init/remove instance functions and into the
module init/exit routines.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485297149-13733-4-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Users may not be familiar with the concept of deferred errors. There is
no action for users to take on this type of error, so give more context
in the error message to make this more clear.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1485297149-13733-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
REDMEMB[17] is the ECC_Locator bit, which, when set, identifies the
CS[3:2] as the simbols in error. And thus the second channel.
The macro computing it was wrong so get rid of it (it was used at one
place only) and get rid of the conditional too. Generates better code
this way anyway.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reported-by: David Binderman <dcb314@hotmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Assign all notifiers on the MCE decode chain a priority so that they get
called in the correct order.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-10-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dump the TSC value of the time when the MCE got logged.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-8-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is not used outside of the driver anymore.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-7-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function sbridge_register_mci() sets pvt->info.show_interleave_mode
to knl_show_interleave_mode() on Knight's Landing and
show_interleave_mode() anywhere else.
Merge show_interleave_mode() and knl_show_interleave_mode() in a single
implementation and use it without an indirect function pointer.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170122172806.10412-1-nicolas.iooss_linux@m4x.org
[ Call it get_intlv_mode_str(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The old csrowX sysfs directories have per-csrow error counters, but the
new dimmX directories do not currently expose error counts.
EDAC already keeps these counts, add them to sysfs so per-DIMM counts
are still available when CONFIG_EDAC_LEGACY_SYSFS=n.
Signed-off-by: Aaron Miller <aaronmiller@fb.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161103220153.3997328-1-aaronmiller@fb.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We should save the return code from probe_one_instance() so that it can
be returned from the module init function. Otherwise, we'll be returning
the -ENOMEM from above.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1484322741-41884-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
If ioremap_nocache() fails, it will return NULL. Which will then cause a
NULL-pointer dereference. Handle the returned value properly.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1484549092-11349-1-git-send-email-arvind.yadav.cs@gmail.com
[ Boris: massage commit message and improve error message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The dev_attr_sdram_scrub_rate is not declared in a header or used
anywhere else, so make it static to fix the following warning:
drivers/edac/edac_mc_sysfs.c:816:1: warning: symbol
'dev_attr_sdram_scrub_rate' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1465407356-7357-1-git-send-email-ben.dooks@codethink.co.uk
Signed-off-by: Borislav Petkov <bp@suse.de>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some kernel-doc tags don't provide good descriptions or use
a different style. Adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there's no device driver documentation for the EDAC
subsystem at the driver-api book. Fill in the blanks for the
structures and functions that misses documentation, uniform
the word on the existing ones, and add a new edac.rst file at
driver-api, in order to document the EDAC subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions are documented at edac_mc.c.
As we'll be including edac_core.h at drivers-api book, move
those, in order for the kernel-doc markups be part of the API
documentation book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions are documented at edac_pci.c and edac_pci_sysfs.c.
As we'll be including edac_pci.h at drivers-api book, move those,
in order for the kernel-doc markups be part of the API
documentation book.
As several of those kernel-doc macros are not in the right format,
fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several functions are documented at edac_device.c.
As we'll be including edac_core.h at drivers-api book, move those,
in order for the kernel-doc markups be part of the API
documentation book.
As several of those kernel-doc macros are not in the right format,
fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The edac_core.h header contain data structures and function
definitions for both EDAC MC and EDAC device.
Let's move the devices ones to a separate header file, as part
of a header reorganization.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The edac_core.h header contain data structures and function
definitions for the 3 parts of EDAC: MC, PCI and device.
Let's move the PCI ones to a separate header file, as part
of a header reorganization.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Prefix the warn and error macros with the respective string so that
callers don't have to say "Error" or "Warning". We save us string length
this way in the actual calls.
While at it, shorten the calls in reserve_mc_sibling_devs().
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
How we need to decode UMC errors is different from how we decode bus
errors, so let's define a new function for this. We also need a way to
determine the UMC channel since we're not guaranteed that there is a
fixed relation between channel and MCA bank.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480359593-80369-1-git-send-email-Yazen.Ghannam@amd.com
[ Fold in decode_synd_reg(), simplify. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
We need to determine the EDAC capabilities from all UMCs on the node. We
should only check UMCs that are enabled and make sure they all agree.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-15-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The UMCs on Fam17h are independent memory controllers so we need to
read the capabilities from all UMCs and make sure they agree. Once
we determine what capabilities are available we should save them for
convenience.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480431116-94683-1-git-send-email-Yazen.Ghannam@amd.com
[ Simplify f17h_determine_edac_ctl_cap(), preinit edac_mode in init_csrows(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Read a few more UMC registers and provide debug output in order to be as
similar as possible to older AMD systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480344621-14966-1-git-send-email-Yazen.Ghannam@amd.com
[ Remove unneeded K8 check and comments, fixup others. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fam17h has new register offsets and fields for setting up the DRAM
scrubber so add support for this.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-17-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
MCA_STATUS[43] has been defined as "Poison" or "Reserved" for every bank
since Fam15h except for Fam15h, bank 4 in which case it's defined as
part of the McaStatSubCache bitfield.
Filter out that case.
Reported-by: Dean Liberty <Dean.Liberty@amd.com>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479478222-19896-1-git-send-email-Yazen.Ghannam@amd.com
[ Split an almost unparseable ternary conditional, add a comment. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fam17h has a different set of registers and bitfields. Most of these
registers are read through SMN (System Management Network) rather
than PCI config space. Also, the derivation of various values is now
different.
Update amd64_edac to read the appropriate registers and extract the
correct values for Fam17h.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-12-git-send-email-Yazen.Ghannam@amd.com
[ Save us the indentation level in read_mc_regs(), add defines ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Bhumika Goyal