Commit Graph

291 Commits

Author SHA1 Message Date
Ingo Molnar 00d1c5e057 x86: add gbpages switches
These new controls toggle experimental support for a new CPU feature,
the straightforward extension of largepages from the pmd level to the
pud level, which allows 1GB (kernel) TLBs instead of 2MB TLBs.

Turn it off by default, as this code has not been tested well enough yet.

Use the CONFIG_DIRECT_GBPAGES=y .config option or gbpages on the
boot line can be used to enable it. If enabled in the .config then
nogbpages boot option disables it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:45 +02:00
Ingo Molnar 88f3aec7af x86: fix spontaneous reboot with allyesconfig bzImage
recently the 64-bit allyesconfig bzImage kernel started spontaneously
rebooting during early bootup.

after a few fun hours spent with early init debugging, it turns out
that we've got this rather annoying limit on the size of the kernel
image:

      #define KERNEL_TEXT_SIZE  (40*1024*1024)

which limit my vmlinux just happened to pass:

       text           data       bss        dec       hex   filename
   29703744        4222751   8646224   42572719   2899baf   vmlinux

40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/

So it happily crashed right in head_64.S, which - as we all know - is
the most debuggable code in the whole architecture ;-)

So increase the limit to allow an up to 128MB kernel image to be mapped.
(should anyone be that crazy or lazy)

We have a full 4K of pagetable (level2_kernel_pgt) allocated for these
mappings already, so there's no RAM overhead and the limit was rather
pointless and arbitrary.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-26 12:55:56 +01:00
Yinghai Lu 3b57bc461f x86: remove double-checking empty zero pages debug
so far no one complained about that.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-26 12:55:55 +01:00
Thomas Gleixner 31eedd823c x86: zap invalid and unused pmds in early boot
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting
from __START_KERNEL_map. The kernel itself only needs _text to _end
mapped in the high alias. On relocatible kernels the ASM setup code
adjusts the compile time created high mappings to the relocation. This
creates invalid pmd entries for negative offsets:

0xffffffff80000000 -> pmd entry: ffffffffff2001e3
It points outside of the physical address space and is marked present.

This starts at the virtual address __START_KERNEL_map and goes up to
the point where the first valid physical address (0x0) is mapped.

Zap the mappings before _text and after _end right away in early
boot. This removes also the invalid entries.

Furthermore it simplifies the range check for high aliases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-18 20:54:14 +01:00
Harvey Harrison 7bfeab9af9 x86: include proper prototypes for rodata_test
extern should not appear in C files.  Also, the definitions
do not match the prototype currently, not sure what way you
want to go with this, I've switched the prototype to return
int, but I can see going to the void return as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-14 23:30:20 +01:00
Thomas Gleixner 76ebd0548d x86: introduce page pool in cpa
DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup
hardcoded reliance on PSE pages, and the unrobustness of the runtime
splitup of large pages. The splitup ended in recursive calls to
alloc_pages() when a page for a pte split was requested.

Avoid the recursion with a preallocated page pool, which is used to
split up large mappings and gets refilled in the return path of
kernel_map_pages after the split has been done. The size of the page
pool is adjusted to the available memory.

This part just implements the page pool and the initialization w/o
using it yet.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-09 23:24:09 +01:00
Thomas Gleixner bfc734b246 x86: avoid unused variable warning in mm/init_64.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-09 23:24:09 +01:00
Bernhard Walle 72a7fe3967 Introduce flags for reserve_bootmem()
This patchset adds a flags variable to reserve_bootmem() and uses the
BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions
between crashkernel area and already used memory.

This patch:

Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE.
If that flag is set, the function returns with -EBUSY if the memory already
has been reserved in the past.  This is to avoid conflicts.

Because that code runs before SMP initialisation, there's no race condition
inside reserve_bootmem_core().

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix powerpc build]
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: <linux-arch@vger.kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:25 -08:00
Arjan van de Ven 984bb80d94 x86: mark the .rodata section also NX
The .rodata section shouldn't just be read-only,
but also non-executable. This is free since we've broken
up the 2MB page already anyway.

also update test_nx to check for this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 22:39:45 +01:00
Andi Kleen d4f71f7969 x86: switch direct mapping setup over to set_pte
Use set_pte() for setting up the 2MB pages in the direct mapping.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:09 +01:00
Andi Kleen bde1965ce8 x86: remove now unused clear_kernel_mapping
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:08 +01:00
Andi Kleen 31422c51e0 x86: rename LARGE_PAGE_SIZE to PMD_PAGE_SIZE
Fix up all users.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:08 +01:00
Yinghai Lu 24a5da73f4 x86_64: make bootmap_start page align v6
boot oopses when a system has 64 or 128 GB of RAM installed:

Calling initcall 0xffffffff80bc33b6: sctp_init+0x0/0x711()
BUG: unable to handle kernel NULL pointer dereference at 000000000000005f
IP: [<ffffffff802bfe55>] proc_register+0xe7/0x10f
PGD 0
Oops: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #6
RIP: 0010:[<ffffffff802bfe55>]  [<ffffffff802bfe55>] proc_register+0xe7/0x10f
RSP: 0000:ffff810824c57e60  EFLAGS: 00010246
RAX: 000000000000d7d7 RBX: ffff811024c5fa80 RCX: ffff810824c57e08
RDX: 0000000000000000 RSI: 0000000000000195 RDI: ffffffff80cc2460
RBP: ffffffffffffffff R08: 0000000000000000 R09: ffff811024c5fa80
R10: 0000000000000000 R11: 0000000000000002 R12: ffff810824c57e6c
R13: 0000000000000000 R14: ffff810824c57ee0 R15: 00000006abd25bee
FS:  0000000000000000(0000) GS:ffffffff80b4d000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000000000005f CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff810824c56000, task ffff812024c52000)
Stack:  ffffffff80a57348 0000019500000000 ffff811024c5fa80 0000000000000000
 00000000ffffff97 ffffffff802bfef0 0000000000000000 ffffffffffffffff
 0000000000000000 ffffffff80bc3b4b ffff810824c57ee0 ffffffff80bc34a5
Call Trace:
 [<ffffffff802bfef0>] ? create_proc_entry+0x73/0x8a
 [<ffffffff80bc3b4b>] ? sctp_snmp_proc_init+0x1c/0x34
 [<ffffffff80bc34a5>] ? sctp_init+0xef/0x711
 [<ffffffff80b976e3>] ? kernel_init+0x175/0x2e1
 [<ffffffff8020ccf8>] ? child_rip+0xa/0x12
 [<ffffffff80b9756e>] ? kernel_init+0x0/0x2e1
 [<ffffffff8020ccee>] ? child_rip+0x0/0x12

Code: 1e 48 83 7b 38 00 75 08 48 c7 43 38 f0 e8 82 80 48 83 7b 30 00 75 08 48 c7 43 30 d0 e9 82 80 48 c7 c7 60 24 cc 80 e8 bd 5a 54 00 <48> 8b 45 60 48 89 6b 58 48 89 5d 60 48 89 43 50 fe 05 f5 25 a0
RIP  [<ffffffff802bfe55>] proc_register+0xe7/0x10f
 RSP <ffff810824c57e60>
CR2: 000000000000005f
---[ end trace 02c2d78def82877a ]---
Kernel panic - not syncing: Attempted to kill init!

it turns out some variables near end of bss are corrupted already.

in System.map we have
ffffffff80d40420 b rsi_table
ffffffff80d40620 B krb5_seq_lock
ffffffff80d40628 b i.20437
ffffffff80d40630 b xprt_rdma_inline_write_padding
ffffffff80d40638 b sunrpc_table_header
ffffffff80d40640 b zero
ffffffff80d40644 b min_memreg
ffffffff80d40648 b rpcrdma_tk_lock_g
ffffffff80d40650 B sctp_assocs_id_lock
ffffffff80d40658 B proc_net_sctp
ffffffff80d40660 B sctp_assocs_id
ffffffff80d40680 B sysctl_sctp_mem
ffffffff80d40690 B sysctl_sctp_rmem
ffffffff80d406a0 B sysctl_sctp_wmem
ffffffff80d406b0 b sctp_ctl_socket
ffffffff80d406b8 b sctp_pf_inet6_specific
ffffffff80d406c0 b sctp_pf_inet_specific
ffffffff80d406c8 b sctp_af_v4_specific
ffffffff80d406d0 b sctp_af_v6_specific
ffffffff80d406d8 b sctp_rand.33270
ffffffff80d406dc b sctp_memory_pressure
ffffffff80d406e0 b sctp_sockets_allocated
ffffffff80d406e4 b sctp_memory_allocated
ffffffff80d406e8 b sctp_sysctl_header
ffffffff80d406f0 b zero
ffffffff80d406f4 A __bss_stop
ffffffff80d406f4 A _end

and setup_node_bootmem() will use that page 0xd40000 for bootmap
Bootmem setup node 0 0000000000000000-0000000828000000
  NODE_DATA [000000000008a485 - 0000000000091484]
  bootmap [0000000000d406f4 -  0000000000e456f3] pages 105
Bootmem setup node 1 0000000828000000-0000001028000000
  NODE_DATA [0000000828000000 - 0000000828006fff]
  bootmap [0000000828007000 -  0000000828106fff] pages 100
Bootmem setup node 2 0000001028000000-0000001828000000
  NODE_DATA [0000001028000000 - 0000001028006fff]
  bootmap [0000001028007000 -  0000001028106fff] pages 100
Bootmem setup node 3 0000001828000000-0000002028000000
  NODE_DATA [0000001828000000 - 0000001828006fff]
  bootmap [0000001828007000 -  0000001828106fff] pages 100

setup_node_bootmem() makes NODE_DATA cacheline aligned,
and bootmap is page-aligned.

the patch updates find_e820_area() to make sure we can meet
the alignment constraints.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01 17:49:41 +01:00
Yinghai Lu 25eff8d4cd x86_64: add debug name for early_res
helps debugging problems in this rather murky area of code.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01 17:49:41 +01:00
Yinghai Lu 9198715763 x86: fix overlap between pagetable with bss section
one early crash on one 8 node 256g machine:

Command line: console=uart8250,io,0x3f8,115200n8 initrd=kernel.org/mydisk11_x86_64.gz rw root=/dev/ram0 debug initcall_debug apic=debug acpi.debug_level=0x0000000f pci=routeirq ip=dhcp load_ramdisk=1 ramdisk_size=131072 BOOT_IMAGE=kernel.org/bzImage_2.6.25_k8.1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable)
 BIOS-e820: 00000000dffe0000 - 00000000dffee000 (ACPI data)
 BIOS-e820: 00000000dffee000 - 00000000dffff050 (ACPI NVS)
 BIOS-e820: 00000000dffff050 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000004020000000 (usable)
Early serial console at I/O port 0x3f8 (options '115200n8')
console [uart0] enabled
end_pfn_map = 67239936
Kernel panic - not syncing: Duplicated early reservation d40000-e42000

Pid: 0, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #3

Call Trace:
 [<ffffffff80221545>] lapic_get_maxlvt+0x0/0x10
 [<ffffffff80221657>] clear_local_APIC+0x5/0xcf
 [<ffffffff80221726>] disable_local_APIC+0x5/0x17
 [<ffffffff8021fe16>] smp_send_stop+0x46/0x4c
 [<ffffffff80235293>] panic+0x94/0x13e
 [<ffffffff80bc3b03>] sctp_eps_proc_init+0x12/0x34
 [<ffffffff80b9f1c5>] reserve_early+0x30/0x6c
 [<ffffffff80803925>] init_memory_mapping+0x2cd/0x2dc
 [<ffffffff80b9dc01>] setup_arch+0x21f/0x44e
 [<ffffffff80b978be>] start_kernel+0x6f/0x2c7
 [<ffffffff80b971cc>] _sinittext+0x1cc/0x1d3

it turns out there is overlap between pgtable and bss...

in System.map we have
ffffffff80d40420 b rsi_table
ffffffff80d40620 B krb5_seq_lock
ffffffff80d40628 b i.20437
ffffffff80d40630 b xprt_rdma_inline_write_padding
ffffffff80d40638 b sunrpc_table_header
ffffffff80d40640 b zero
ffffffff80d40644 b min_memreg
ffffffff80d40648 b rpcrdma_tk_lock_g
ffffffff80d40650 B sctp_assocs_id_lock
ffffffff80d40658 B proc_net_sctp
ffffffff80d40660 B sctp_assocs_id
ffffffff80d40680 B sysctl_sctp_mem
ffffffff80d40690 B sysctl_sctp_rmem
ffffffff80d406a0 B sysctl_sctp_wmem
ffffffff80d406b0 b sctp_ctl_socket
ffffffff80d406b8 b sctp_pf_inet6_specific
ffffffff80d406c0 b sctp_pf_inet_specific
ffffffff80d406c8 b sctp_af_v4_specific
ffffffff80d406d0 b sctp_af_v6_specific
ffffffff80d406d8 b sctp_rand.33270
ffffffff80d406dc b sctp_memory_pressure
ffffffff80d406e0 b sctp_sockets_allocated
ffffffff80d406e4 b sctp_memory_allocated
ffffffff80d406e8 b sctp_sysctl_header
ffffffff80d406f0 b zero
ffffffff80d406f4 A __bss_stop
ffffffff80d406f4 A _end

need to round up table_start to PAGE_SIZE.

also make the panic more informative.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:12 +01:00
Ingo Molnar 10f22dde55 x86: arch/x86/mm/init_64.c printk fixes
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:10 +01:00
Thomas Gleixner 14a62c34b1 x86: unify ioremap
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:10 +01:00
Ingo Molnar 86f03989d9 x86: cpa: fix the self-test
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:09 +01:00
Ingo Molnar ee01f1122c x86: init memory debugging
debug incorrect/late access to init memory, by permanently unmapping
the init memory ranges. Depends on CONFIG_DEBUG_PAGEALLOC=y.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:09 +01:00
Arjan van de Ven 1a4872529e x86: move misplaced rodata check call
It looks like a mismerge put the rodata self-check in the wrong spot; move
it to the right place after marking the .rodata section read only.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:09 +01:00
Arjan van de Ven edeed30589 x86: add testcases for RODATA and NX protections/attributes
Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd.
I also cleaned up the NX test code quite a bit, and got rid of the ugly
exception table sorting stuff.

From: Arjan van de Ven <arjan@linux.intel.com>

This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option
as well as the NX CPU feature/mappings. Both testcases can move to tests/
once that patch gets merged into mainline.
(I'm half considering moving the rodata test into mm/init.c but I'll
wait with that until init.c is unified)

As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h
for the RODATA sections, which lead to 1 page less being marked read only.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:08 +01:00
Arjan van de Ven 3c1df68b84 x86: make sure initmem is writable
When we free initmem, various rodata and CPA checks may have left
memory read only.. this patch ensures that the memory is writable
before we free it.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Thomas Gleixner d7c8f21a8c x86: cpa: move flush to cpa
The set_memory_* and set_pages_* family of API's currently requires the
callers to do a global tlb flush after the function call; forgetting this is
a very nasty deathtrap. This patch moves the global tlb flush into
each of the callers

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Ingo Molnar f62d0f008e x86: cpa: set_memory_notpresent()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Arjan van de Ven 6d238cc4dc x86: convert CPA users to the new set_page_ API
This patch converts various users of change_page_attr() to the new,
more intent driven set_page_*/set_memory_* API set.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:06 +01:00
Andi Kleen 1a2b441231 x86: fix early_ioremap() on 64-bit
Fix early_ioremap() on x86-64

I had ACPI failures on several machines since a few days. Symptom
was NUMA nodes not getting detected or worse cores not getting detected.
They all came from ACPI not being able to read various of its tables. I finally
bisected it down to Jeremy's "put _PAGE_GLOBAL into PAGE_KERNEL" change.
With that the fix was fairly obvious. The problem was that early_ioremap()
didn't use a "_all" flush that would affect the global PTEs too. So
with global bits getting used everywhere now an early_ioremap would
not actually flush a mapping if something else was mapped previously
on that slot (which can happen with early_iounmap inbetween)

This patch changes all flushes in init_64.c to be __flush_tlb_all()
and fixes the problem here.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:54 +01:00
Andi Kleen 0c42f39276 c_p_a(): do a simple self test at boot
When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again.
This gives some simple testing for change_page_attr().

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:42 +01:00
Andi Kleen 7517527891 x86: replace hard coded reservations in 64-bit early boot code with dynamic table
On x86-64 there are several memory allocations before bootmem. To avoid
them stomping on each other they used to be all hard coded in bad_area().
Replace this with an array that is filled as needed.

This cleans up the code considerably and allows to expand its use.

Cc: peterz@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:17 +01:00
Ingo Molnar f2633105cd x86: debug: double-check the empty zero page
temporary debugging - remove before this hits v2.6.25.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:36 +01:00
Yinghai Lu 48ddb154cf x86: not clear empty_zero_page again
empty_zero_page is in .bss section, and it is cleared in clear_bss by
x86_64_start_kernel(). So don't clear that again in mem_init

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:36 +01:00
Jeremy Fitzhardinge 27ec161f93 x86: kill mk_pte_huge
It only has a single use, which can be trivially replaced.

Signed-off-by: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:09 +01:00
Joerg Roedel 929fd58913 x86: some whitespace cleanups in paging code
This patch does some whitespace cleanups in the paging code to fix some
checkpatch.pl warnings of my formerly merged cleanup patches.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:08 +01:00
Joerg Roedel 40842bf50e x86: use __PAGE_KERNEL* instead of _KERNPG_TABLE
This minor cleanup replaces _KERNPG_TABLE with the __PAGE_KERNEL* for 2MB PTEs
in the 64-bit memory initialization code. The __PAGE_KERNEL* defines are more
appropriate for PTEs.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:02 +01:00
Christoph Lameter b263295dbf x86: 64-bit, make sparsemem vmemmap the only memory model
Use sparsemem as the only memory model for UP, SMP and NUMA.  Measurements
indicate that DISCONTIGMEM has a higher overhead than sparsemem.  And
FLATMEMs benefits are minimal.  So I think its best to simply standardize
on sparsemem.

Results of page allocator tests (test can be had via git from slab git
tree branch tests)

Measurements in cycle counts. 1000 allocations were performed and then the
average cycle count was calculated.

Order	FlatMem	Discontig	SparseMem
0	  639	  665		  641
1	  567	  647		  593
2	  679	  774		  692
3	  763	  967		  781
4	  961	 1501		  962
5	 1356	 2344		 1392
6	 2224	 3982		 2336
7	 4869	 7225		 5074
8	12500	14048		12732
9	27926	28223		28165
10	58578	58714		58682

(Note that FlatMem is an SMP config and the rest NUMA configurations)

Memory use:

SMP Sparsemem
-------------

Kernel size:

   text    data     bss     dec     hex filename
3849268  397739 1264856 5511863  541ab7 vmlinux

             total       used       free     shared    buffers     cached
Mem:       8242252      41164    8201088          0        352      11512
-/+ buffers/cache:      29300    8212952
Swap:      9775512          0    9775512

SMP Flatmem
-----------

Kernel size:

   text    data     bss     dec     hex filename
3844612  397739 1264536 5506887  540747 vmlinux

So 4.5k growth in text size vs. FLATMEM.

             total       used       free     shared    buffers     cached
Mem:       8244052      40544    8203508          0        352      11484
-/+ buffers/cache:      28708    8215344

2k growth in overall memory use after boot.

NUMA discontig:

   text    data     bss     dec     hex filename
3888124  470659 1276504 5635287  55fcd7 vmlinux

             total       used       free     shared    buffers     cached
Mem:       8256256      56908    8199348          0        352      11496
-/+ buffers/cache:      45060    8211196
Swap:      9775512          0    9775512

NUMA sparse:

   text    data     bss     dec     hex filename
3896428  470659 1276824 5643911  561e87 vmlinux

8k text growth. Given that we fully inline virt_to_page and friends now
that is rather good.

             total       used       free     shared    buffers     cached
Mem:       8264720      57240    8207480          0        352      11516
-/+ buffers/cache:      45372    8219348
Swap:      9775512          0    9775512

The total available memory is increased by 8k.

This patch makes sparsemem the default and removes discontig and
flatmem support from x86.

[ akpm@linux-foundation.org: allnoconfig build fix ]

Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:47 +01:00
Thomas Gleixner aaa64e04f9 x86: move numa related declarations
More stuff shuffeled to the correct place

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:17 +01:00
Thomas Gleixner 718fc13b46 x86: move debug related declarations to kdebug.h
Move them and fixup some users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:17 +01:00
KAMEZAWA Hiroyuki b6fd6ecb83 memory hotplug x86_64: fix section mismatch in init_memory_mapping()
Changes __meminit to __init_refok.

WARNING: vmlinux.o(.text+0x1d07c): Section mismatch: reference to
.init.text:find_e820_area (between 'init_memory_mapping' and 'arch_add_memory')

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:54 -08:00
Linus Torvalds 6a22c57b8d Revert "x86_64: allocate sparsemem memmap above 4G"
This reverts commit 2e1c49db4c.

First off, testing in Fedora has shown it to cause boot failures,
bisected down by Martin Ebourne, and reported by Dave Jobes.  So the
commit will likely be reverted in the 2.6.23 stable kernels.

Secondly, in the 2.6.24 model, x86-64 has now grown support for
SPARSEMEM_VMEMMAP, which disables the relevant code anyway, so while the
bug is not visible any more, it's become invisible due to the code just
being irrelevant and no longer enabled on the only architecture that
this ever affected.

Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Martin Ebourne <fedora@ebourne.me.uk>
Cc: Zou Nan hai <nanhai.zou@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29 14:05:37 -07:00
KAMEZAWA Hiroyuki 48e94196a5 fix memory hot remove not configured case.
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.

 - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
 - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
   which returns -EINVAL.
 - removed remove_pages() only used in powerpc.
 - removed no-op remove_memory() in i386, sh, sparc64, x86_64.

 - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
   to return -EINVAL.

Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
Christoph Lameter 0889eba5b3 x86_64: SPARSEMEM_VMEMMAP 2M page size support
x86_64 uses 2M page table entries to map its 1-1 kernel space.  We also
implement the virtual memmap using 2M page table entries.  So there is no
additional runtime overhead over FLATMEM, initialisation is slightly more
complex.  As FLATMEM still references memory to obtain the mem_map pointer and
SPARSEMEM_VMEMMAP uses a compile time constant, SPARSEMEM_VMEMMAP should be
superior.

With this SPARSEMEM becomes the most efficient way of handling virt_to_page,
pfn_to_page and friends for UP, SMP and NUMA on x86_64.

[apw@shadowen.org: code resplit, style fixups]
[apw@shadowen.org: vmemmap x86_64: ensure end of section memmap is initialised]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:51 -07:00
Thomas Gleixner 95119fbd87 x86_64: move mm
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:18 +02:00