A write to a kernfs_node is buffered through a kernel buffer. Writes
<= PAGE_SIZE are performed atomically, while larger ones are executed
in PAGE_SIZE chunks. While this is enough for sysfs, cgroup which is
scheduled to be converted to use kernfs needs a bit more control over
it.
This patch adds kernfs_ops->atomic_write_len. If not set (zero), the
behavior stays the same. If set, writes upto the size are executed
atomically and larger writes are rejected with -E2BIG.
A different implementation strategy would be allowing configuring
chunking size while making the original write size available to the
write method; however, such strategy, while being more complicated,
doesn't really buy anything. If the write implementation has to
handle chunking, the specific chunk size shouldn't matter all that
much.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, kernfs_nodes are made visible to userland on creation,
which makes it difficult for kernfs users to atomically succeed or
fail creation of multiple nodes. In addition, if something fails
after creating some nodes, the created nodes might already be in use
and their active refs need to be drained for removal, which has the
potential to introduce tricky reverse locking dependency on active_ref
depending on how the error path is synchronized.
This patch introduces per-root flag KERNFS_ROOT_CREATE_DEACTIVATED.
If set, all nodes under the root are created in the deactivated state
and stay invisible to userland until explicitly enabled by the new
kernfs_activate() API. Also, nodes which have never been activated
are guaranteed to bypass draining on removal thus allowing error paths
to not worry about lockding dependency on active_ref draining.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_iop_lookup(), kernfs_dir_pos() and kernfs_dir_next_pos() were
missing kernfs_active() tests before using the found kernfs_node. As
deactivated state is currently visible only while a node is being
removed, this doesn't pose an actual problem. e.g. lookup succeeding
on a deactivated node doesn't harm anything as the eventual file
operations are gonna fail and those failures are indistinguishible
from the cases in which the lookups had happened before the node was
deactivated.
However, we're gonna allow new nodes to be created deactivated and
then activated explicitly by the kernfs user when it sees fit. This
is to support atomically making multiple nodes visible to userland and
thus those nodes must not be visible to userland before activated.
Let's plug the lookup and readdir holes so that deactivated nodes are
invisible to userland.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add two super_block related syscall callbacks ->remount_fs() and
->show_options() to kernfs_syscall_ops. These simply forward the
matching super_operations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're gonna need non-dir syscall callbacks, which will make dir_ops a
misnomer. Let's rename kernfs_dir_ops to kernfs_syscall_ops.
This is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_dir_ops are currently being invoked without any active
reference, which makes it tricky for the invoked operations to
determine whether the objects associated those nodes are safe to
access and will remain that way for the duration of such operations.
kernfs already has active_ref mechanism to deal with this which makes
the removal of a given node the synchronization point for gating the
file operations. There's no reason for dir_ops to be any different.
Update the dir_ops handling so that active_ref is held while the
dir_ops are executing. This guarantees that while a dir_ops is
executing the target nodes stay alive.
As kernfs_dir_ops doesn't have any in-kernel user at this point, this
doesn't affect anybody.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes it's necessary to implement a node which wants to delete
nodes including itself. This isn't straightforward because of kernfs
active reference. While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing. For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.
This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously. If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.
The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self. This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core. kernfs_remove_self() is to be called from one of the file
operations, drops the active ref the task is holding, removes the self
node, and restores active ref to the dead node so that the ref is
balanced afterwards. __kernfs_remove() is updated so that it takes an
early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.
This makes implementing self-deleting nodes very easy. The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node. The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path. kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.
This will replace sysfs_schedule_callback(). A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once. An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion. All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false. This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.
Note that manipulation of active ref is implemented in separate public
functions - kernfs_[un]break_active_protection().
kernfs_remove_self() is the only user at the moment but this will be
used to cater to more complex cases.
v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
and sysfs_remove_file_self() had incorrect return type. Fix it.
Reported by kbuild test bot.
v3: kernfs_[un]break_active_protection() separated out from
kernfs_remove_self() and exposed as public API.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KERNFS_REMOVED is used to mark half-initialized and dying nodes so
that they don't show up in lookups and deny adding new nodes under or
renaming it; however, its role overlaps that of deactivation.
It's necessary to deny addition of new children while removal is in
progress; however, this role considerably intersects with deactivation
- KERNFS_REMOVED prevents new children while deactivation prevents new
file operations. There's no reason to have them separate making
things more complex than necessary.
This patch removes KERNFS_REMOVED.
* Instead of KERNFS_REMOVED, each node now starts its life
deactivated. This means that we now use both atomic_add() and
atomic_sub() on KN_DEACTIVATED_BIAS, which is INT_MIN. The compiler
generates an overflow warnings when negating INT_MIN as the negation
can't be represented as a positive number. Nothing is actually
broken but let's bump BIAS by one to avoid the warnings for archs
which negates the subtrahend..
* A new helper kernfs_active() which tests whether kn->active >= 0 is
added for convenience and lockdep annotation. All KERNFS_REMOVED
tests are replaced with negated kernfs_active() tests.
* __kernfs_remove() is updated to deactivate, but not drain, all nodes
in the subtree instead of setting KERNFS_REMOVED. This removes
deactivation from kernfs_deactivate(), which is now renamed to
kernfs_drain().
* Sanity check on KERNFS_REMOVED in kernfs_put() is replaced with
checks on the active ref.
* Some comment style updates in the affected area.
v2: Reordered before removal path restructuring. kernfs_active()
dropped and kernfs_get/put_active() used instead. RB_EMPTY_NODE()
used in the lookup paths.
v3: Reverted most of v2 except for creating a new node with
KN_DEACTIVATED_BIAS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There currently are two mechanisms gating active ref lockdep
annotations - KERNFS_LOCKDEP flag and KERNFS_ACTIVE_REF type mask.
The former disables lockdep annotations in kernfs_get/put_active()
while the latter disables all of kernfs_deactivate().
While KERNFS_ACTIVE_REF also behaves as an optimization to skip the
deactivation step for non-file nodes, the benefit is marginal and it
needlessly diverges code paths. Let's drop KERNFS_ACTIVE_REF.
While at it, add a test helper kernfs_lockdep() to test KERNFS_LOCKDEP
flag so that it's more convenient and the related code can be compiled
out when not enabled.
v2: Refreshed on top of ("kernfs: make kernfs_deactivate() honor
KERNFS_LOCKDEP flag"). As the earlier patch already added
KERNFS_LOCKDEP tests to kernfs_deactivate(), those additions are
dropped from this patch and the existing ones are simply converted
to kernfs_lockdep().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were
added because there were operations which should be performed outside
kernfs_mutex after adding and removing kernfs_nodes. The necessary
operations were recorded in kernfs_addrm_cxt and performed by
kernfs_addrm_finish(); however, after the recent changes which
relocated deactivation and unmapping so that they're performed
directly during removal, the only operation kernfs_addrm_finish()
performs is kernfs_put(), which can be moved inside the removal path
too.
This patch moves the kernfs_put() of the base ref to __kernfs_remove()
and remove kernfs_addrm_cxt and kernfs_addrm_start/finish().
* kernfs_add_one() is updated to grab and release kernfs_mutex itself.
sysfs_addrm_start/finish() invocations around it are removed from
all users.
* __kernfs_remove() puts an unlinked node directly instead of chaining
it to kernfs_addrm_cxt. Its callers are updated to grab and release
kernfs_mutex instead of calling kernfs_addrm_start/finish() around
it.
v2: Rebased on top of "kernfs: associate a new kernfs_node with its
parent on creation" which dropped @parent from kernfs_add_one().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_unmap_bin_file() is supposed to unmap all memory mappings of
the target file before kernfs_remove() finishes; however, it currently
is being called from kernfs_addrm_finish() and has the same race
problem as the original implementation of deactivation when there are
multiple removers - only the remover which snatches the node to its
addrm_cxt->removed list is guaranteed to wait for its completion
before returning.
It can be easily fixed by moving kernfs_unmap_bin_file() invocation
from kernfs_addrm_finish() to kernfs_deactivated(). The function may
be called multiple times but that shouldn't do any harm.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recursive nature of kernfs_remove() means that, even if
kernfs_remove() is not allowed to be called multiple times on the same
node, there may be race conditions between removal of parent and its
descendants. While we can claim that kernfs_remove() shouldn't be
called on one of the descendants while the removal of an ancestor is
in progress, such rule is unnecessarily restrictive and very difficult
to enforce. It's better to simply allow invoking kernfs_remove() as
the caller sees fit as long as the caller ensures that the node is
accessible.
The current behavior in such situations is broken. Whoever enters
removal path first takes the node off the hierarchy and then
deactivates. Following removers either return as soon as it notices
that it's not the first one or can't even find the target node as it
has already been removed from the hierarchy. In both cases, the
following removers may finish prematurely while the nodes which should
be removed and drained are still being processed by the first one.
This patch restructures so that multiple removers, whether through
recursion or direction invocation, always follow the following rules.
* When there are multiple concurrent removers, only one puts the base
ref.
* Regardless of which one puts the base ref, all removers are blocked
until the target node is fully deactivated and removed.
To achieve the above, removal path now first marks all descendants
including self REMOVED and then deactivates and unlinks leftmost
descendant one-by-one. kernfs_deactivate() is called directly from
__kernfs_removal() and drops and regrabs kernfs_mutex for each
descendant to drain active refs. As this means that multiple removers
can enter kernfs_deactivate() for the same node, the function is
updated so that it can handle multiple deactivators of the same node -
only one actually deactivates but all wait till drain completion.
The restructured removal path guarantees that a removed node gets
unlinked only after the node is deactivated and drained. Combined
with proper multiple deactivator handling, this guarantees that any
invocation of kernfs_remove() returns only after the node itself and
all its descendants are deactivated, drained and removed.
v2: Draining separated into a separate loop (used to be in the same
loop as unlink) and done from __kernfs_deactivate(). This is to
allow exposing deactivation as a separate interface later.
Root node removal was broken in v1 patch. Fixed.
v3: Revert most of v2 except for root node removal fix and
simplification of KERNFS_REMOVED setting loop.
v4: Refreshed on top of ("kernfs: make kernfs_deactivate() honor
KERNFS_LOCKDEP flag").
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->u.completion is used to notify deactivation completion
from kernfs_put_active() to kernfs_deactivate(). We now allow
multiple racing removals of the same node and the current removal
scheme is no longer correct - kernfs_remove() invocation may return
before the node is properly deactivated if it races against another
removal. The removal path will be restructured to address the issue.
To help such restructure which requires supporting multiple waiters,
this patch replaces kernfs_node->u.completion with
kernfs_root->deactivate_waitq. This makes deactivation event
notifications share a per-root waitqueue_head; however, the wait path
is quite cold and this will also allow shaving one pointer off
kernfs_node.
v2: Refreshed on top of ("kernfs: make kernfs_deactivate() honor
KERNFS_LOCKDEP flag").
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_deactivate() forgot to check whether KERNFS_LOCKDEP is set
before performing lockdep annotations and ends up feeding
uninitialized lockdep_map to lockdep triggering warning like the
following on USB stick hotunplug.
usb 1-2: USB disconnect, device number 2
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 62 Comm: khubd Not tainted 3.13.0-work+ #82
Hardware name: empty empty/S3992, BIOS 080011 10/26/2007
ffff880065ca7f60 ffff88013a4ffa08 ffffffff81cfb6bd 0000000000000002
ffff88013a4ffac8 ffffffff810f8530 ffff88013a4fc710 0000000000000002
ffff880100000000 ffffffff82a3db50 0000000000000001 ffff88013a4fc710
Call Trace:
[<ffffffff81cfb6bd>] dump_stack+0x4e/0x7a
[<ffffffff810f8530>] __lock_acquire+0x1910/0x1e70
[<ffffffff810f931a>] lock_acquire+0x9a/0x1d0
[<ffffffff8127c75e>] kernfs_deactivate+0xee/0x130
[<ffffffff8127d4c8>] kernfs_addrm_finish+0x38/0x60
[<ffffffff8127d701>] kernfs_remove_by_name_ns+0x51/0xa0
[<ffffffff8127b4f1>] remove_files.isra.1+0x41/0x80
[<ffffffff8127b7e7>] sysfs_remove_group+0x47/0xa0
[<ffffffff8127b873>] sysfs_remove_groups+0x33/0x50
[<ffffffff8177d66d>] device_remove_attrs+0x4d/0x80
[<ffffffff8177e25e>] device_del+0x12e/0x1d0
[<ffffffff819722c2>] usb_disconnect+0x122/0x1a0
[<ffffffff819749b5>] hub_thread+0x3c5/0x1290
[<ffffffff810c6a6d>] kthread+0xed/0x110
[<ffffffff81d0a56c>] ret_from_fork+0x7c/0xb0
Fix it by making kernfs_deactivate() perform lockdep annotations only
if KERNFS_LOCKDEP is set.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once created, a kernfs_node is always destroyed by kernfs_put().
Since ba7443bc65 ("sysfs, kernfs: implement
kernfs_create/destroy_root()"), kernfs_put() depends on kernfs_root()
to locate the ino_ida. kernfs_root() in turn depends on
kernfs_node->parent being set for !dir nodes. This means that
kernfs_put() of a !dir node requires its ->parent to be initialized.
This leads to oops when a newly created !dir node is destroyed without
going through kernfs_add_one() or after failing kernfs_add_one()
before ->parent is set. kernfs_root() invoked from kernfs_put() will
try to dereference NULL parent.
Fix it by moving parent association to kernfs_new_node() from
kernfs_add_one(). kernfs_new_node() now takes @parent instead of
@root and determines the root from the parent and also sets the new
node's parent properly. @parent parameter is removed from
kernfs_add_one(). As there's no parent when creating the root node,
__kernfs_new_node() which takes @root as before and doesn't set the
parent is used in that case.
This ensures that a kernfs_node in any stage in its life has its
parent associated and thus can be put.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV). kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.
If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.
Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV). This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().
tj: This was originally committed as d92d2e6bd7 but got reverted by
683bb2761f along with other kernfs self removal patches.
However, this one is an independent fix and shouldn't have been
reverted together. Reinstate the change. Sorry about the mess.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d92d2e6bd7.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ea1c472dfe.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a69d001cfc.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ae34372eb8.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 45a140e587.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit f601f9a2bf.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 99177a3411.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 895a068a52.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 9f010c2ad5.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1ae06819c7.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 88533f990c.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
895a068a52 ("kernfs: make kernfs_get_active() block if the node is
deactivated but not removed") added "struct kernfs_root *root =
kernfs_root(kn);" at the head of the function; however, the parameter
@kn is checked for later implying that the function may be called with
NULL. This means that we may end up invoking kernfs_root() with NULL
which will oops. None of the existing users invokes removal with NULL
@kn, so this bug doesn't actually trigger.
We can relocate kernfs_root() invocation after NULL check; however,
allowing NULL param tends to cause more confusion than actually
helping anything. As there's no existing user, let's remove the
spurious NULL check.
This bug was detected by smatch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes it's necessary to implement a node which wants to delete
nodes including itself. This isn't straightforward because of kernfs
active reference. While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing. For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.
This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously. If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.
The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self. This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core. kernfs_remove_self() is to be called from one of the file
operations, drops the active ref and deactivates using
__kernfs_deactivate_self(), removes the self node, and restores active
ref to the dead node using __kernfs_reactivate_self() so that the ref
is balanced afterwards. __kernfs_remove() is updated so that it takes
an early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.
This makes implementing self-deleting nodes very easy. The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node. The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path. kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.
This will replace sysfs_schedule_callback(). A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once. An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion. All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false. This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.
v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
and sysfs_remove_file_self() had incorrect return type. Fix it.
Reported by kbuild test bot.
v3: Updated to use __kernfs_{de|re}activate_self().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements four functions to manipulate deactivation state
- deactivate, reactivate and the _self suffixed pair. A new fields
kernfs_node->deact_depth is added so that concurrent and nested
deactivations are handled properly. kernfs_node->hash is moved so
that it's paired with the new field so that it doesn't increase the
size of kernfs_node.
A kernfs user's lock would normally nest inside active ref but during
removal the user may want to perform kernfs_remove() while holding the
said lock, which would introduce a reverse locking dependency. This
function can be used to break such reverse dependency by allowing
deactivation step to performed separately outside user's critical
section.
This will also be used implement kernfs_remove_self().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, kernfs_get_active() fails if the target node is
deactivated. This is fine as a node always gets removed after
deactivation; however, we're gonna add reactivation so the assumption
won't hold. It'd be incorrect for kernfs_get_active() to fail for a
node which was deactivated only temporarily.
This patch makes kernfs_get_active() block if the node is deactivated
but not removed. If the node gets reactivated (not yet implemented),
it will be retried and succeed. If the node gets removed, it will be
woken up and fail.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were
added because there were operations which should be performed outside
kernfs_mutex after adding and removing kernfs_nodes. The necessary
operations were recorded in kernfs_addrm_cxt and performed by
kernfs_addrm_finish(); however, after the recent changes which
relocated deactivation and unmapping so that they're performed
directly during removal, the only operation kernfs_addrm_finish()
performs is kernfs_put(), which can be moved inside the removal path
too.
This patch moves the kernfs_put() of the base ref to __kernfs_remove()
and remove kernfs_addrm_cxt and kernfs_addrm_start/finish().
* kernfs_add_one() is updated to grab and release the parent's active
ref and kernfs_mutex itself. kernfs_get/put_active() and
kernfs_addrm_start/finish() invocations around it are removed from
all users.
* __kernfs_remove() puts an unlinked node directly instead of chaining
it to kernfs_addrm_cxt. Its callers are updated to grab and release
kernfs_mutex instead of calling kernfs_addrm_start/finish() around
it.
v2: Updated to fit the v2 restructuring of removal path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_unmap_bin_file() is supposed to unmap all memory mappings of
the target file before kernfs_remove() finishes; however, it currently
is being called from kernfs_addrm_finish() and has the same race
problem as the original implementation of deactivation when there are
multiple removers - only the remover which snatches the node to its
addrm_cxt->removed list is guaranteed to wait for its completion
before returning.
It can be fixed by moving kernfs_unmap_bin_file() invocation from
kernfs_addrm_finish() to __kernfs_remove(). The function may be
called multiple times but that shouldn't do any harm.
We end up dropping kernfs_mutex in the removal loop and the node may
be removed inbetween by someone else. kernfs_unlink_sibling() is
updated to test whether the node has already been removed and return
accordingly. __kernfs_remove() in turn performs post-unlinking
cleanup only if it actually unlinked the node.
KERNFS_HAS_MMAP test is moved out of the unmap function into
__kernfs_remove() so that we don't unlock kernfs_mutex unnecessarily.
While at it, drop the now meaningless "bin" qualifier from the
function name.
v2: Rewritten to fit the v2 restructuring of removal path. HAS_MMAP
test relocated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recursive nature of kernfs_remove() means that, even if
kernfs_remove() is not allowed to be called multiple times on the same
node, there may be race conditions between removal of parent and its
descendants. While we can claim that kernfs_remove() shouldn't be
called on one of the descendants while the removal of an ancestor is
in progress, such rule is unnecessarily restrictive and very difficult
to enforce. It's better to simply allow invoking kernfs_remove() as
the caller sees fit as long as the caller ensures that the node is
accessible.
The current behavior in such situations is broken. Whoever enters
removal path first takes the node off the hierarchy and then
deactivates. Following removers either return as soon as it notices
that it's not the first one or can't even find the target node as it
has already been removed from the hierarchy. In both cases, the
following removers may finish prematurely while the nodes which should
be removed and drained are still being processed by the first one.
This patch restructures so that multiple removers, whether through
recursion or direction invocation, always follow the following rules.
* When there are multiple concurrent removers, only one puts the base
ref.
* Regardless of which one puts the base ref, all removers are blocked
until the target node is fully deactivated and removed.
To achieve the above, removal path now first deactivates the subtree,
drains it and then unlinks one-by-one. __kernfs_deactivate() is
called directly from __kernfs_removal() and drops and regrabs
kernfs_mutex for each descendant to drain active refs. As this means
that multiple removers can enter __kernfs_deactivate() for the same
node, the function is updated so that it can handle multiple
deactivators of the same node - only one actually deactivates but all
wait till drain completion.
The restructured removal path guarantees that a removed node gets
unlinked only after the node is deactivated and drained. Combined
with proper multiple deactivator handling, this guarantees that any
invocation of kernfs_remove() returns only after the node itself and
all its descendants are deactivated, drained and removed.
v2: Draining separated into a separate loop (used to be in the same
loop as unlink) and done from __kernfs_deactivate(). This is to
allow exposing deactivation as a separate interface later.
Root node removal was broken in v1 patch. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KERNFS_REMOVED is used to mark half-initialized and dying nodes so
that they don't show up in lookups and deny adding new nodes under or
renaming it; however, its role overlaps those of deactivation and
removal from rbtree.
It's necessary to deny addition of new children while removal is in
progress; however, this role considerably intersects with deactivation
- KERNFS_REMOVED prevents new children while deactivation prevents new
file operations. There's no reason to have them separate making
things more complex than necessary.
KERNFS_REMOVED is also used to decide whether a node is still visible
to vfs layer, which is rather redundant as equivalent determination
can be made by testing whether the node is on its parent's children
rbtree or not.
This patch removes KERNFS_REMOVED.
* Instead of KERNFS_REMOVED, each node now starts its life
deactivated. This means that we now use both atomic_add() and
atomic_sub() on KN_DEACTIVATED_BIAS, which is INT_MIN. The compiler
generates an overflow warnings when negating INT_MIN as the negation
can't be represented as a positive number. Nothing is actually
broken but let's bump BIAS by one to avoid the warnings for archs
which negates the subtrahend..
* KERNFS_REMOVED tests in add and rename paths are replaced with
kernfs_get/put_active() of the target nodes. Due to the way the add
path is structured now, active ref handling is done in the callers
of kernfs_add_one(). This will be consolidated up later.
* kernfs_remove_one() is updated to deactivate instead of setting
KERNFS_REMOVED. This removes deactivation from kernfs_deactivate(),
which is now renamed to kernfs_drain().
* kernfs_dop_revalidate() now tests RB_EMPTY_NODE(&kn->rb) instead of
KERNFS_REMOVED and KERNFS_REMOVED test in kernfs_dir_pos() is
dropped. A node which is removed from the children rbtree is not
included in the iteration in the first place. This means that a
node may be visible through vfs a bit longer - it's now also visible
after deactivation until the actual removal. This slightly enlarged
window difference doesn't make any difference to the userland.
* Sanity check on KERNFS_REMOVED in kernfs_put() is replaced with
checks on the active ref.
* Some comment style updates in the affected area.
v2: Reordered before removal path restructuring. kernfs_active()
dropped and kernfs_get/put_active() used instead. RB_EMPTY_NODE()
used in the lookup paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There currently are two mechanisms gating active ref lockdep
annotations - KERNFS_LOCKDEP flag and KERNFS_ACTIVE_REF type mask.
The former disables lockdep annotations in kernfs_get/put_active()
while the latter disables all of kernfs_deactivate().
While KERNFS_ACTIVE_REF also behaves as an optimization to skip the
deactivation step for non-file nodes, the benefit is marginal and it
needlessly diverges code paths. Let's drop KERNFS_ACTIVE_REF and use
KERNFS_LOCKDEP in kernfs_deactivate() too.
While at it, add a test helper kernfs_lockdep() to test KERNFS_LOCKDEP
flag so that it's more convenient and the related code can be compiled
out when not enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->u.completion is used to notify deactivation completion
from kernfs_put_active() to kernfs_deactivate(). We now allow
multiple racing removals of the same node and the current removal
scheme is no longer correct - kernfs_remove() invocation may return
before the node is properly deactivated if it races against another
removal. The removal path will be restructured to address the issue.
To help such restructure which requires supporting multiple waiters,
this patch replaces kernfs_node->u.completion with
kernfs_root->deactivate_waitq. This makes deactivation event
notifications share a per-root waitqueue_head; however, the wait path
is quite cold and this will also allow shaving one pointer off
kernfs_node.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV). kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.
If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.
Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV). This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for mkdir(2), rmdir(2) and rename(2) syscalls. This is
implemented through optional kernfs_dir_ops callback table which can
be specified on kernfs_create_root(). An implemented callback is
invoked when the matching syscall is invoked.
As kernfs keep dcache syncs with internal representation and
revalidates dentries on each access, the implementation of these
methods is extremely simple. Each just discovers the relevant
kernfs_node(s) and invokes the requested callback which is allowed to
do any kernfs operations and the end result doesn't necessarily have
to match the expected semantics of the syscall.
This will be used to convert cgroup to use kernfs instead of its own
filesystem implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs doesn't allow negative dentries - kernfs_iop_lookup() returns
ERR_PTR(-ENOENT) instead of NULL which short-circuits negative dentry
creation and kernfs's d_delete() callback, kernfs_dop_delete(),
returns 1 for all removed nodes. This in turn allows
kernfs_dop_revalidate() to assume that there's no negative dentry for
kernfs.
This worked fine for sysfs but kernfs is scheduled to grow mkdir(2)
support which depend on negative dentries. This patch updates so that
kernfs allows negative dentries. The required changes are almost
trivial - kernfs_iop_lookup() now returns NULL instead of
ERR_PTR(-ENOENT) when the target kernfs_node doesn't exist,
kernfs_dop_delete() is removed and kernfs_dop_revalidate() is updated
to check whether the target dentry is negative and request fresh
lookup if so.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_rename_ns() currently assumes that the target sysfs_dirent has
a copied name. This has been okay because sysfs supports rename only
for directories which always have copied names; however, there's
nothing in kernfs interface which calls for such restriction and
currently invoking kernfs_rename_ns() on a regular file leads to oops
because it ends up trying to kfree() a static name.
This patch updates kernfs_rename_ns() so that it skips kfree() of the
old name if it's static. This allows it to be used for all node
types.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because sysfs used struct attribute which are supposed to stay
constant, sysfs didn't copy names when creating regular files. The
specified string for name was supposed to stay constant. Such
distinction isn't inherent for kernfs. kernfs_create_file[_ns]()
should be able to take the same @name as kernfs_create_dir[_ns]()
As there can be huge number of sysfs attributes, we still want to be
able to use static names for sysfs attributes. This patch renames
kernfs_create_file_ns_key() to __kernfs_create_file() and adds
@name_is_static parameter so that the caller can explicitly indicate
that @name can be used without copying. kernfs is updated to use
KERNFS_STATIC_NAME to distinguish static and copied names.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs currently assumes that the caller doesn't try to create a new
node under a removed parent, rename a removed node, or move a node
under a removed node. While this works fine for sysfs, it'd be nice
to have protection against such cases especially given that kernfs is
planned to add support for mkdir, rmdir and rename requsts from
userland which may make race conditions more likely.
This patch updates create and rename paths to check REMOVED and fail
the operation with -ENOENT if performed on or towards removed nodes.
Note that remove path already has such check.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs assumed 0755 for all newly created directories and kernfs
inherited it. This assumption is unnecessarily restrictive and
inconsistent with kernfs_create_file[_ns](). This patch adds @mode
parameter to kernfs_create_dir[_ns]() and update uses in sysfs
accordingly. Among others, this will be useful for implementations of
the planned ->mkdir() method.
This patch doesn't introduce any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_*()/kernfs_*()/ in all internal functions
* s/sysfs/kernfs/ in internal strings, comments and whatever is remaining
* Uniformly rename various vfs operations so that they're consistently
named and distinguishable.
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_mutex/kernfs_mutex/
* s/sysfs_dentry_ops/kernfs_dops/
* s/sysfs_dir_operations/kernfs_dir_fops/
* s/sysfs_dir_inode_operations/kernfs_dir_iops/
* s/kernfs_file_operations/kernfs_file_fops/ - renamed for consistency
* s/sysfs_symlink_inode_operations/kernfs_symlink_iops/
* s/sysfs_aops/kernfs_aops/
* s/sysfs_backing_dev_info/kernfs_bdi/
* s/sysfs_inode_operations/kernfs_iops/
* s/sysfs_dir_cachep/kernfs_node_cache/
* s/sysfs_ops/kernfs_sops/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/SYSFS_DIR/KERNFS_DIR/
* s/SYSFS_KOBJ_ATTR/KERNFS_FILE/
* s/SYSFS_KOBJ_LINK/KERNFS_LINK/
* s/SYSFS_{TYPE_FLAGS}/KERNFS_{TYPE_FLAGS}/
* s/SYSFS_FLAG_{FLAG}/KERNFS_{FLAG}/
* s/sysfs_type()/kernfs_type()/
* s/SD_DEACTIVATED_BIAS/KN_DEACTIVATED_BIAS/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_open_dirent/kernfs_open_node/
* s/sysfs_open_file/kernfs_open_file/
* s/sysfs_inode_attrs/kernfs_iattrs/
* s/sysfs_addrm_cxt/kernfs_addrm_cxt/
* s/sysfs_super_info/kernfs_super_info/
* s/sysfs_info()/kernfs_info()/
* s/sysfs_open_dirent_lock/kernfs_open_node_lock/
* s/sysfs_open_file_mutex/kernfs_open_file_mutex/
* s/sysfs_of()/kernfs_of()/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
s_ prefix for kernfs members is used inconsistently and a misnomer
now. It's not like kernfs_node is used widely across the kernel
making the ability to grep for the members particularly useful. Let's
just drop the prefix.
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_elem_dir/kernfs_elem_dir/
* s/sysfs_elem_symlink/kernfs_elem_symlink/
* s/sysfs_elem_attr/kernfs_elem_file/
* s/sysfs_dirent/kernfs_node/
* s/sd/kn/ in kernfs proper
* s/parent_sd/parent/
* s/target_sd/target/
* s/dir_sd/parent/
* s/to_sysfs_dirent()/rb_to_kn()/
* misc renames of local vars when they conflict with the above
Because md, mic and gpio dig into sysfs details, this patch ends up
modifying them. All are sysfs_dirent renames and trivial. While we
can avoid these by introducing a dummy wrapping struct sysfs_dirent
around kernfs_node, given the limited usage outside kernfs and sysfs
proper, I don't think such workaround is called for.
This patch is strictly rename only and doesn't introduce any
functional difference.
- mic / gpio renames were missing. Spotted by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is v3.14 fix for the same issue that a8b1474442 ("sysfs: give
different locking key to regular and bin files") addresses for v3.13.
Due to the extensive kernfs reorganization in v3.14 branch, the same
fix couldn't be ported as-is. The v3.13 fix was ignored while merging
it into v3.14 branch.
027a485d12 ("sysfs: use a separate locking class for open files
depending on mmap") assigned different lockdep key to
sysfs_open_file->mutex depending on whether the file implements mmap
or not in an attempt to avoid spurious lockdep warning caused by
merging of regular and bin file paths.
While this restored some of the original behavior of using different
locks (at least lockdep is concerned) for the different clases of
files. The restoration wasn't full because now the lockdep key
assignment depends on whether the file has mmap or not instead of
whether it's a regular file or not.
This means that bin files which don't implement mmap will get assigned
the same lockdep class as regular files. This is problematic because
file_operations for bin files still implements the mmap file operation
and checking whether the sysfs file actually implements mmap happens
in the file operation after grabbing @sysfs_open_file->mutex. We
still end up adding locking dependency from mmap locking to
sysfs_open_file->mutex to the regular file mutex which triggers
spurious circular locking warning.
For v3.13, a8b1474442 ("sysfs: give different locking key to regular
and bin files") fixed it by giving sysfs_open_file->mutex different
lockdep keys depending on whether the file is regular or bin instead
of whether mmap exists or not; however, due to the way sysfs is now
layered behind kernfs, this approach is no longer viable. kernfs can
tell whether a sysfs node has mmap implemented or not but can't tell
whether a bin file from a regular one.
This patch updates kernfs such that kernfs_file_mmap() checks
SYSFS_FLAG_HAS_MMAP and bail before grabbing sysfs_open_file->mutex so
that it doesn't add spurious locking dependency from mmap to
sysfs_open_file->mutex and changes sysfs so that it specifies
kernfs_ops->mmap iff the sysfs file implements mmap. Combined, this
ensures that sysfs_open_file->mutex is grabbed under mmap path iff the
sysfs file actually implements mmap. As sysfs_open_file->mutex is
already given a different lockdep key if mmap is implemented, this
removes the spurious locking dependency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/g/20131203184324.GA11320@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs inherited "security.*" xattr support from sysfs. This patch
extends xattr support to "trusted.*" using simple_xattr_*(). As
trusted xattrs are restricted to CAP_SYS_ADMIN, simple_xattr_*() which
uses kernel memory for storage shouldn't be problematic.
Note that the existing "security.*" support doesn't implement
get/remove/list and the this patch only implements those ops for
"trusted.*". We probably want to extend those ops to include support
for "security.*".
This patch will allow using kernfs from cgroup which requires
"trusted.*" xattr support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_init_inode_attrs() is a bit clumsy to use requiring the caller
to check whether @sd->s_iattr is already set or not. Rename it to
sysfs_inode_attrs(), update it to check whether @sd->s_iattr is
already initialized before trying to initialize it and return
@sd->s_iattr. This simplifies the callers.
While at it,
* Rename struct sysfs_inode_attrs pointer variables to "attrs". As
kernfs no longer deals with "struct attribute", this isn't confusing
and makes it easier to distinguish from struct iattr pointers.
* A new field will be added to sysfs_inode_attrs. Reindent in
preparation.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/kernfs/kernfs-internal.h needed to include fs/sysfs/sysfs.h because
part of kernfs core implementation was living in sysfs.
fs/sysfs/sysfs.h needed to include fs/kernfs/kernfs-internal.h because
include/linux/kernfs.h didn't expose enough interface.
The separation is complete and neither is true anymore. Remove the
cross inclusion and make sysfs a proper user of kernfs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/sysfs/symlink.c::sysfs_delete_link() tests @sd->s_flags for
SYSFS_FLAG_NS. Let's add kernfs_ns_enabled() so that sysfs doesn't
have to test sysfs_dirent flag directly. This makes things tidier for
kernfs proper too.
This is purely cosmetic.
v2: To avoid possible NULL deref, use noop dummy implementation which
always returns false when !CONFIG_SYSFS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_dirent includes some information which should be available to
kernfs users - the type, flags, name and parent pointer. This patch
moves sysfs_dirent definition from kernfs/kernfs-internal.h to
include/linux/kernfs.h so that kernfs users can access them.
The type part of flags is exported as enum kernfs_node_type, the flags
kernfs_node_flag, sysfs_type() and kernfs_enable_ns() are moved to
include/linux/kernfs.h and the former is updated to return the enum
type. sysfs_dirent->s_parent and ->s_name are marked explicitly as
public.
This patch doesn't introduce any functional changes.
v2: Flags exported too and kernfs_enable_ns() definition moved.
v3: While moving kernfs_enable_ns() to include/linux/kernfs.h, v1 and
v2 put the definition outside CONFIG_SYSFS replacing the dummy
implementation with the actual implementation too. Unfortunately,
this can lead to oops when !CONFIG_SYSFS because
kernfs_enable_ns() may be called on a NULL @sd and now tries to
dereference @sd instead of not doing anything. This issue was
reported by Yuanhan Liu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core mount code to fs/kernfs/mount.c. The respective
declarations in fs/sysfs/sysfs.h are moved to
fs/kernfs/kernfs-internal.h.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
rearranges mount path so that the kernfs and sysfs parts are separate.
* As sysfs_super_info won't be visible outside kernfs proper,
kernfs_super_ns() is added to allow kernfs users to access a
super_block's namespace tag.
* Generic mount operation is separated out into kernfs_mount_ns().
sysfs_mount() now just performs sysfs-specific permission check,
acquires namespace tag, and invokes kernfs_mount_ns().
* Generic superblock release is separated out into kernfs_kill_sb()
which can be used directly as file_system_type->kill_sb(). As sysfs
needs to put the namespace tag, sysfs_kill_sb() wraps
kernfs_kill_sb() with ns tag put.
* sysfs_dir_cachep init and sysfs_inode_init() are separated out into
kernfs_init(). kernfs_init() uses only small amount of memory and
trying to handle and propagate kernfs_init() failure doesn't make
much sense. Use SLAB_PANIC for sysfs_dir_cachep and make
sysfs_inode_init() panic on failure.
After this change, kernfs_init() should be called before
sysfs_init(), fs/namespace.c::mnt_init() modified accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs is being updated to allow multiple sysfs_dirent hierarchies so
that it can also be used by other users. Currently, inode number is
allocated using a global ida, sysfs_ino_ida; however, inos for
different hierarchies should be handled separately.
This patch makes ino allocation per kernfs_root. sysfs_ino_ida is
replaced by kernfs_root->ino_ida and sysfs_new_dirent() is updated to
take @root and allocate ino from it. ida_simple_get/remove() are used
instead of sysfs_ino_lock and sysfs_alloc/free_ino().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There currently is single kernfs hierarchy in the whole system which
is used for sysfs. kernfs needs to support multiple hierarchies to
allow other users. This patch introduces struct kernfs_root which
serves as the root of each kernfs hierarchy and implements
kernfs_create/destroy_root().
* Each kernfs_root is associated with a root sd (sysfs_dentry). The
root is freed when the root sd is released and kernfs_destory_root()
simply invokes kernfs_remove() on the root sd. sysfs_remove_one()
is updated to handle release of the root sd. Note that ps_iattr
update in sysfs_remove_one() is trivially updated for readability.
* Root sd's are now dynamically allocated using sysfs_new_dirent().
Update sysfs_alloc_ino() so that it gives out ino from 1 so that the
root sd still gets ino 1.
* While kernfs currently only points to the root sd, it'll soon grow
fields which are specific to each hierarchy. As determining a given
sd's root will be necessary, sd->s_dir.root is added. This backlink
fits better as a separate field in sd; however, sd->s_dir is inside
union with space to spare, so use it to save space and provide
kernfs_root() accessor to determine the root sd.
* As hierarchies may be destroyed now, each mount needs to hold onto
the hierarchy it's attached to. Update sysfs_fill_super() and
sysfs_kill_sb() so that they get and put the kernfs_root
respectively.
* sysfs_root is replaced with kernfs_root which is dynamically created
by invoking kernfs_create_root() from sysfs_init().
This patch doesn't introduce any visible behavior changes.
v2: kernfs_create_root() forgot to set @sd->priv. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core symlink code to fs/kernfs/symlink.c. fs/sysfs/symlink.c now
only contains sysfs wrappers around kernfs interfaces. The respective
declarations in fs/sysfs/sysfs.h are moved to
fs/kernfs/kernfs-internal.h.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core file code to fs/kernfs/file.c. fs/sysfs/file.c now contains
sysfs kernfs_ops callbacks, sysfs wrappers around kernfs interfaces,
and sysfs_schedule_callback(). The respective declarations in
fs/sysfs/sysfs.h are moved to fs/kernfs/kernfs-internal.h.
This is pure relocation.
v2: Refreshed on top of the v2 of "sysfs, kernfs: prepare read path
for kernfs".
v3: Refreshed on top of the v3 of "sysfs, kernfs: prepare read path
for kernfs".
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move core dir code to fs/kernfs/dir.c. fs/sysfs/dir.c now only
contains sysfs_warn_dup() and sysfs wrappers around kernfs interfaces.
The respective declarations in fs/sysfs/sysfs.h are moved to
fs/kernfs/kernfs-internal.h.
This is pure relocation.
v2: sysfs_symlink_target_lock was mistakenly relocated to kernfs. It
should remain with sysfs. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's nothing sysfs-specific in fs/sysfs/inode.c. Move everything
in it to fs/kernfs/inode.c. The respective declarations in
fs/sysfs/sysfs.h are moved to fs/kernfs/kernfs-internal.h.
This is pure relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move data structure, constant and basic accessor declarations from
fs/sysfs/sysfs.h to fs/kernfs/kernfs-internal.h. The two files
currently include each other. Once kernfs / sysfs separation is
complete, the cross inclusions will be removed. Inclusion protectors
are added to fs/sysfs/sysfs.h to allow cross-inclusion.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Core sysfs implementation will be separated into kernfs so that it can
be used by other non-kobject users.
This patch creates fs/kernfs/ directory and makes boilerplate changes.
kernfs interface will be directly based on sysfs_dirent and its
forward declaration is moved to include/linux/kernfs.h which is
included from include/linux/sysfs.h. sysfs core implementation will
be gradually separated out and moved to kernfs.
This patch doesn't introduce any functional changes.
v2: mount.c added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo