Commit Graph

26 Commits

Author SHA1 Message Date
Linus Torvalds 06d381484f Merge branch 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  net: xen-netback: use API provided by xenbus module to map rings
  block: xen-blkback: use API provided by xenbus module to map rings
  xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-06 18:31:36 -08:00
Linus Torvalds 3d0a8d10cf Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-block
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits)
  virtio-blk: use ida to allocate disk index
  hpsa: add small delay when using PCI Power Management to reset for kump
  cciss: add small delay when using PCI Power Management to reset for kump
  xen/blkback: Fix two races in the handling of barrier requests.
  xen/blkback: Check for proper operation.
  xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
  xen/blkback: Report VBD_WSECT (wr_sect) properly.
  xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
  xen-blkfront: plug device number leak in xlblk_init() error path
  xen-blkfront: If no barrier or flush is supported, use invalid operation.
  xen-blkback: use kzalloc() in favor of kmalloc()+memset()
  xen-blkback: fixed indentation and comments
  xen-blkfront: fix a deadlock while handling discard response
  xen-blkfront: Handle discard requests.
  xen-blkback: Implement discard requests ('feature-discard')
  xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
  drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
  drivers/block/loop.c: emit uevent on auto release
  drivers/block/cpqarray.c: use pci_dev->revision
  loop: always allow userspace partitions and optionally support automatic scanning
  ...

Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04 17:22:14 -07:00
David Vrabel 2d073846b8 block: xen-blkback: use API provided by xenbus module to map rings
The xenbus module provides xenbus_map_ring_valloc() and
xenbus_map_ring_vfree().  Use these to map the ring pages granted by
the frontend.

Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-26 10:02:35 -04:00
Konrad Rzeszutek Wilk 29bde09378 xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
We emulate the barrier requests by draining the outstanding bio's
and then sending the WRITE_FLUSH command. To drain the I/Os
we use the refcnt that is used during disconnect to wait for all
the I/Os before disconnecting from the frontend. We latch on its
value and if it reaches either the threshold for disconnect or when
there are no more outstanding I/Os, then we have drained all I/Os.

Suggested-by: Christopher Hellwig <hch@infradead.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-13 09:48:36 -04:00
Joe Jin c555aab97d xen-blkback: fixed indentation and comments
This patch fixes belows:

1. Fix code style issue.
2. Fix incorrect functions name in comments.

Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-13 09:48:33 -04:00
Li Dongyang b3cb0d6adc xen-blkback: Implement discard requests ('feature-discard')
..aka ATA TRIM/SCSI UNMAP command to be passed through the frontend
and used as appropiately by the backend. We also advertise
certain granulity parameters to the frontend so it can plug them in.
If the backend is a realy device - we just end up using
'blkdev_issue_discard' while for loopback devices - we just punch
a hole in the image file.

Signed-off-by: Li Dongyang <lidongyang@novell.com>
[v1: Fixed up pr_debug and commit description]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-13 09:48:30 -04:00
Jens Axboe 89c63a8ef3 Merge branch 'stable/for-jens' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus 2011-08-23 15:09:13 +02:00
Joe Jin 1bc05b0ae6 xen-blkback: fixed indentation and comments
This patch fixes belows:

1. Fix code style issue.
2. Fix incorrect functions name in comments.

Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22 11:35:36 -04:00
Joe Jin 6f5986bce5 xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed.
When do block-attach/block-detach test with below steps, umount hangs
in the guest. Furthermore shutdown ends up being stuck when umounting file-systems.

1. start guest.
2. attach new block device by xm block-attach in Dom0.
3. mount new disk in guest.
4. execute xm block-detach to detach the block device in dom0 until timeout
5. Any request to the disk will hung.

Root cause:
This issue is caused when setting backend device's state to
'XenbusStateClosing', which sends to the frontend the XenbusStateClosing
notification. When frontend receives the notification it tries to release
the disk in blkfront_closing(), but at that moment the disk is still in use
by guest, so frontend refuses to close. Specifically it sets the disk state to
XenbusStateClosing and sends the notification to backend - when backend receives the
event, it disconnects the vbd from real device, and sets the vbd device state to
XenbusStateClosing. The backend disconnects the real device/file, and any IO
requests to the disk in guest will end up in ether, leaving disk DEAD and set to
XenbusStateClosing. When the guest wants to disconnect the disk, umount will
hang on blkif_release()->xlvbd_release_gendisk() as it is unable to send any IO
to the disk, which prevents clean system shutdown.

Solution:
Don't disconnect backend until frontend state switched to XenbusStateClosed.

Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Daniel Stodden <daniel.stodden@citrix.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Annie Li <annie.li@oracle.com>
Cc: Ian Campbell <Ian.Campbell@eu.citrix.com>
[v1: Modified description a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22 11:35:35 -04:00
Joe Perches 08b8bfc1c6 xen: Add __attribute__((format(printf... where appropriate
Use the compiler to verify printf formats and arguments.

Fix fallout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-30 12:14:40 -04:00
Laszlo Ersek 6464920a6e xen/blkback: don't call vbd_size() if bd_disk is NULL
...because vbd_size() dereferences bd_disk if bd_part is NULL.

Signed-off-by: Laszlo Ersek<lersek@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-01 09:28:20 -04:00
Konrad Rzeszutek Wilk 5185432277 xen/blkback: Align the tabs on the structure.
The recent changes caused this field of the structure to be offset a bit.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 18:02:28 -04:00
Konrad Rzeszutek Wilk 3d814731ba xen/blkback: Prefix 'vbd' with 'xen' in structs and functions.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 17:55:52 -04:00
Konrad Rzeszutek Wilk 30fd150202 xen/blkback: Change structure name blkif_st to xen_blkif.
No need for that '_st' and xen_blkif is more apt.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 17:55:51 -04:00
Konrad Rzeszutek Wilk 03e0edf946 xen/blkback: Checkpatch.pl recommend against multiple assigments.
CHECK: multiple assignments should be avoided

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 17:55:47 -04:00
Konrad Rzeszutek Wilk b9fc02968c xen/blkback: Fix spelling mistakes.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 16:43:21 -04:00
Konrad Rzeszutek Wilk 22b20f2dff xen/blkback: Use the DRV_PFX in the pr_.. macros.
To make it easier to read.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 16:43:12 -04:00
Konrad Rzeszutek Wilk 1afbd730a3 xen/blkback: Make the DPRINTK uniform.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 16:42:51 -04:00
Konrad Rzeszutek Wilk ebe8190659 xen/blkback: Change printk/DPRINTK to pr_.. type variant.
And also make them uniform and prefix the message with 'xen-blkback'.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-12 16:42:31 -04:00
Konrad Rzeszutek Wilk 01f37f2d53 xen/blkback: Fixed up comments and converted spaces to tabs.
Suggested-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-11 15:57:09 -04:00
Konrad Rzeszutek Wilk 24f567f952 xen/blkback: Add support for BLKIF_OP_FLUSH_DISKCACHE and drop BLKIF_OP_WRITE_BARRIER.
We drop the support for 'feature-barrier' and add in the support
for the 'feature-flush-cache' if the real backend storage supports
flushing.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-05 13:43:24 -04:00
Konrad Rzeszutek Wilk 8b6bf747d7 xen/blkback: Prefix exposed functions with xen_
And also shorten the name if it has blkback to blkbk.

This results in the symbol table (if compiled in the kernel)
to be much shorter, prettier,  and also easier to search for.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-20 11:58:03 -04:00
Konrad Rzeszutek Wilk 42c7841d17 xen-blkback: Inline some of the functions that were moved from vbd/interface.c
Shuffling code around.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-20 11:58:02 -04:00
Konrad Rzeszutek Wilk 6cd0388cd6 xen-blkback: Remove from the copyright notice the address.
There is no need for it, as the address is updated constatly
in the root of the Linux kernel.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-20 11:58:01 -04:00
Konrad Rzeszutek Wilk ee9ff8537e xen/blkback: Squash vbd.c,interface.c in blkback.c and xenbus.c respectivly.
Daniel Stodden suggested to eliminate vbd.c and interface.c, inlining the
critical bits where they belong, respectively.

Leaving only blkback.c for the data- and xenbus.c for the control path.

Suggested-by:  Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-20 11:57:59 -04:00
Konrad Rzeszutek Wilk dfc07b13dc xen/blkback: Move it from drivers/xen to drivers/block
.. and modify the Makefile and Kconfig files appropriately.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-18 14:30:26 -04:00