We add component->card_list in the end of soc_probe_component(). In
other words, component->card_list will not be added if there is an
error in the soc_probe_component() function. So we can't delete
component->card_list in the error handling of soc_probe_component().
Fixes: 22d1423187 ("ASoC: soc-core: add soc_cleanup_component()")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916210353.6318-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EDMA requires the period size to be multiple of maxburst. Otherwise the
remaining bytes are not transferred and thus noise is produced.
We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds quirk VID ID for Hiby portable players family with
native DSD playback support.
Signed-off-by: Ilya Pshonkin <sudokamikaze@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190917074937.157802-1-ilya.pshonkin@netforce.ua
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data
channels per data block in CIP.
Both iO14 and iO26 have the same contents in their configuration ROM.
For this reason, ALSA Dice driver attempts to distinguish them according
to the value of TX0_AUDIO register at probe callback. Although the way is
valid at lower and middle sampling rate, it's lastly invalid at higher
sampling rate because because the two models returns the same value for
read transaction to the register.
In the most cases, users just plug-in the device and ALSA dice driver
detects it. In the case, the device runs at lower sampling rate and
the driver detects expectedly. For this reason, this commit leaves the
way to detect as is.
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
v5.4 kernel cycle.
Core changes:
- Support hierarchical GPIO irqchips. We now have three
consumers that can use this: Intel IXP4xx, ThunderX and
Qualcomm SPMI GPIO (in the pinctrl subsystem). The support
code has been long in the making and hashed out so it should
be easily adaptable for all hierarchical irqchip parents.
The code only gets compiled in if hierarchical irqchip
is used at the topmost irq controller at least, as the
hierarchical irqchip requires strict hierarchy all the
way up in the system.
- Determine the need for a "valid_mask" for GPIO lines on the
gpio_chip and conversely for the "valid_mask" for the GPIO
interrupt chip interrupt lines by looking for a
.init_valid_mask() callback in the main chip or GPIO interrupt
chip respectively. Allocate it with bitmap_alloc().
- Isolate the device tree/open firmware GPIO description code
out in its own file properly.
- Isolate the ACPI GPIO description code out in its own file
properly.
- Drop a whole lot of #ifdef:s in the main includes: it does
not hurt to keep the include items around, and we get
quicker and clearer compile failures if the appropriate
kernel symbols are not selected for drivers.
New/deleted drivers:
- New driver for Aspeed SGPIO.
- The KS8695 driver is deleted as the platform gets deleted
from arch/arm in this kernel cycle.
- The Cirrus Logic Madera driver now supports CS47L92 and
CS47L15.
- The Freescale MPC8xxx now supports LS1028A and LS1088A.
Driver improvements:
- We pass the GPIO irqchip intialization by directly filling
in the struct instead of using set-up functions (the new
way) for Intel MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed,
ZX, VF610, TQMX86, MT7621, Zynq and EP93xx.
Out-of-band changes:
- Fix a GPIO header inclusion in Unicore - no response from
maintainer.
- Drop FMC subsystem from MAINTAINERS - was deleted in the
GPIO tree last cycle so let's mop up the shards.
-----BEGIN PGP SIGNATURE-----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=/TRI
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of changes in the GPIO subsystem for the v5.4 kernel
cycle.
Core changes:
- Support hierarchical GPIO irqchips.
We now have three consumers that can use this: Intel IXP4xx,
ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem).
The support code has been long in the making and hashed out so it
should be easily adaptable for all hierarchical irqchip parents.
The code only gets compiled in if hierarchical irqchip is used at
the topmost irq controller at least, as the hierarchical irqchip
requires strict hierarchy all the way up in the system.
- Determine the need for a "valid_mask" for GPIO lines on the
gpio_chip and conversely for the "valid_mask" for the GPIO
interrupt chip interrupt lines by looking for a .init_valid_mask()
callback in the main chip or GPIO interrupt chip respectively.
Allocate it with bitmap_alloc().
- Isolate the device tree/open firmware GPIO description code out in
its own file properly.
- Isolate the ACPI GPIO description code out in its own file
properly.
- Drop a whole lot of #ifdef:s in the main includes: it does not hurt
to keep the include items around, and we get quicker and clearer
compile failures if the appropriate kernel symbols are not selected
for drivers.
New/deleted drivers:
- New driver for Aspeed SGPIO.
- The KS8695 driver is deleted as the platform gets deleted from
arch/arm in this kernel cycle.
- The Cirrus Logic Madera driver now supports CS47L92 and CS47L15.
- The Freescale MPC8xxx now supports LS1028A and LS1088A.
Driver improvements:
- We pass the GPIO irqchip intialization by directly filling in the
struct instead of using set-up functions (the new way) for Intel
MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86,
MT7621, Zynq and EP93xx.
Out-of-band changes:
- Fix a GPIO header inclusion in Unicore - no response from
maintainer.
- Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree
last cycle so let's mop up the shards"
* tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits)
gpiolib: of: add a fallback for wlf,reset GPIO name
gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq()
gpio: remove explicit comparison with 0
gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code
gpio: devres: Switch to EXPORT_SYMBOL_GPL()
gpio: of: Switch to EXPORT_SYMBOL_GPL()
gpio: of: Make of_gpio_simple_xlate() private
gpio: of: Make of_get_named_gpiod_flags() private
gpio: aspeed: Add in ast2600 details to Aspeed driver
gpio: aspeed: Use ngpio property from device tree if available
gpio: aspeed: Setup irqchip dynamically
gpio/aspeed: Fix incorrect number of banks
gpio: aspeed: Update documentation with ast2600 controllers
gpio: Initialize the irqchip valid_mask with a callback
gpiolib: acpi: make acpi_can_fallback_to_crs() static
gpio: Fix further merge errors
gpio: Fix up merge collision in include file
gpio: of: Normalize return code variable name
gpio: gpiolib: Normalize return code variable name
gpio: ep93xx: Pass irqchip when adding gpiochip
...
A few small fixes and one feature that came in since I sent you the
earlier pull request.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1+v7ETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0N6DB/4kXPv5zew+Vm6uOz+4WguP+TqettIM
N47HXiWz66TKjM4m+7EWU+iZwOgtXGEisT0VvhVCNHvFiKRugViyURhgR2qNkBI8
KCion+EmehcRKLWesz3U06YXIaEctj54dUcdpi2wpymf1V1wye/wKJAWVDFpRd2z
g1/TcIp4KQaspEnfnTYEiN2jmeV4TGeJsWXMdeu2gbUf7zw0aEHMXt1QaiiNC0Vz
2T689MZBrBd/z0MT62EE0bkHoEqdgB+yxNSOWjoldjtx6yZ9wuz9f2Jc2WlPZT3i
97K2RJ3+TIwdeVtsN5ijZP61ALpz7Qif5q6UiSytyQcBdxYnwegUZlLT
=oi7v
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Final merge window fixes for v5.4
A few small fixes and one feature that came in since I sent you the
earlier pull request.
This is to allow machine drivers to set a certain bitclk rate
which might not be exactly rate * frame size.
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190830215910.31590-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While it is safe to use strncpy in this case, the advice is to move to
strscpy or strscpy_pad.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190911083331.16801-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All these functions declares and initializes variable ret with
'0' and without modifying 'ret' variable, it is returned.
This patch removes this redundancy and returns '0' directly.
Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190909174541.GA22718@SD
Signed-off-by: Mark Brown <broonie@kernel.org>
2 bytes in MSB of register for clock status is zero during intermediate
state after changing status of sampling clock in models of TASCAM FireWire
series. The duration of this state differs depending on cases. During the
state, it's better to retry reading the register for current status of
the clock.
In current implementation, the intermediate state is checked only when
getting current sampling transmission frequency, then retry reading.
This care is required for the other operations to read the register.
This commit moves the codes of check and retry into helper function
commonly used for operations to read the register.
Fixes: e453df44f0 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The return value of snd_tscm_stream_get_clock() is ignored. This commit
checks the value and handle error.
Fixes: e453df44f0 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl13cr4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NKuB/9fvRIh6bJ4pUA26Bc7+shJQ1BtC/MN
jo1G4maN+hY5ZUwE5hvg04S6W6Unm1iNotQecKcF43Vh/4SZNiLtfSEM4b/6IBWw
IFUU6xDz8Q4HbF4HJMotpKQKMABpfds5flH2e1YrrNoMH+KlkC9kJOR26B2W36xW
TZclfquCDICxr8M7eYGM7N5hOqSrlugyWBZqTTnTDnsMrW4SAaH2HYwFhaeayd+I
ECyaXIoUHvo4FX5ueZv/mzBiMl0z4rgXn3tuqI6a8LoWJdRZTkcSQabtuIC+wmxb
P734RY6vjSUYZrv03cAtxHDrSVoC/RYedOzhT+iFF6y/NHzdu701lsJb
=aD0T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.4
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
Add an op in hdmi_codec_ops so codec driver can register callback
function to handle plug event.
Driver in DRM can use this callback function to report connector status.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.org
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.
This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to simplify understanding what register values are being
written to the codec for debugging more advanced features (such as
hotwording) it is best to remove magic numbers
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_unbind_aux_dev() implementation is very half,
thus it is very unreadable.
for_each_comp_order(order) {
for_each_card_auxs_safe(card, comp, _comp) {
(1) if (comp->driver->remove_order == order) {
...
=> soc_unbind_aux_dev(comp);
}
}
soc_unbind_aux_dev() itself is not related to remove_order (1).
And, it is called from soc_remove_aux_devices(), even though
its paired function soc_bind_aux_dev() is called from
snd_soc_instantiate_card().
It is very unbalance, and very difficult to understand.
This patch do
1) update soc_bind_aux_dev() to self contained
2) call it from soc_cleanup_card_resources() to make up balance
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r24wor0z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc-core.c has soc_bind_aux_dev(), but, there is no its paired
soc_unbind_aux_dev().
This patch adds soc_unbind_aux_dev().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpcor14.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_bind_aux_dev() implementation is very half,
thus it is very unreadable.
for_each_card_pre_auxs(xxx) {
=> ret = soc_bind_aux_dev(xxx);
...
}
This patch does all for_each_xxx() under soc_bind_aux_dev(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9sor1b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
This patch moves soc_probe_link_dais() next to soc_remove_link_dais()
which is paired function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9u8or1g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_probe_link_dais() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx)
=> soc_probe_link_dais(xxx);
}
This patch does all for_each_xxx() under soc_probe_link_dais(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87woeoor1m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_probe_link_dais() (1) is called under probe_order (2),
and it will initialize dai_link related settings at *Last* turn (3)(B).
It is very complex code.
static int soc_probe_link_dais(..., order)
{
(A) /* probe DAIs here */
...
(3) if (order != SND_SOC_COMP_ORDER_LAST)
return 0;
(B) /* initialize dai_link related settings */
...
}
static int snd_soc_instantiate_card(...)
{
...
(2) for_each_comp_order(order) {
for_each_card_rtds(...) {
(1) ret = soc_probe_link_dais(..., order);
}
}
}
This patch separes soc_probe_link_dais() into "DAI probe" portion (A),
and dai_link settings portion (B).
The later is named as soc_link_init() by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2z4or1r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
This patch moves soc_probe_dai() next to soc_remove_dai() which is
paired function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhjkor1x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_remove_link_dais() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx)
=> soc_remove_link_dais(xxx);
}
This patch does all for_each_xxx() under soc_remove_link_dais(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rwwq5mm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_remove_link_components() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx)
=> soc_remove_link_components(xxx);
}
This patch does all for_each_xxx() under soc_remove_link_components(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736hcq5ms.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_probe_link_components() implementation is very half,
thus it is very difficult to read.
for_each_comp_order(xxx) {
for_each_card_rtds(xxx) {
=> ret = soc_probe_link_components(xxx);
...
}
}
This patch does all for_each_xxx() under soc_probe_link_components(),
and makes it to self contained.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1sq5mx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 82 bytes.
Before:
text data bss dec hex filename
26548 7288 64 33900 846c sound/soc/codecs/rt1308.o
After:
text data bss dec hex filename
26370 7384 64 33818 841a sound/soc/codecs/rt1308.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074634.22144-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 93 bytes.
Before:
text data bss dec hex filename
38961 9784 64 48809 bea9 sound/soc/codecs/rt1305.o
After:
text data bss dec hex filename
38804 9848 64 48716 be4c sound/soc/codecs/rt1305.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074156.21907-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 100 bytes.
Before:
text data bss dec hex filename
51463 13016 128 64607 fc5f sound/soc/codecs/rt1011.o
After:
text data bss dec hex filename
51299 13080 128 64507 fbfb sound/soc/codecs/rt1011.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907073717.21632-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch set 0Hz to sysclk when shutdown the card.
Some codecs set rate constraints that derives from sysclk. This
mechanism works correctly if machine drivers give fixed frequency.
But simple-audio and audio-graph card set variable clock rate if
'mclk-fs' property exists. In this case, rate constraints will go
bad scenario. For example a codec accepts three limited rates
(mclk / 256, mclk / 384, mclk / 512).
Bad scenario as follows (mclk-fs = 256):
- Initialize sysclk by correct value (Ex. 12.288MHz)
- Codec set constraints of PCM rate by sysclk
48kHz (1/256), 32kHz (1/384), 24kHz (1/512)
- Play 48kHz sound, it's acceptable
- Sysclk is not changed
- Play 32kHz sound, it's acceptable
- Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256)
- Codec set constraints of PCM rate by sysclk
32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512)
- Play 48kHz again, but it's NOT acceptable because constraints
do not allow 48kHz
So codecs treat 0Hz sysclk as signal of applying no constraints to
avoid this problem.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch ignores sysclk setting if it is 0Hz.
Some codecs treat 0Hz sysclk as signal of applying no constraints.
This driver does not have such feature but current implementation
outputs 'Failed to set mclk' error message if machine driver sets
0Hz sysclk to this driver.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174332.19586-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.
Before:
text data bss dec hex filename
16253 7200 0 23453 5b9d sound/soc/codecs/ad193x.o
After:
text data bss dec hex filename
16056 7360 0 23416 5b78 sound/soc/codecs/ad193x.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190906161404.1440-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.
Original code refuses sysclk == 0 setting. But some boards and SoC
(such as RockPro64 and RockChip I2S) has connected SoC MCLK out to
ES8316 MCLK in. In this case, SoC side I2S will choose suitable
frequency of MCLK such as fs * mclk-fs when user starts playing or
capturing.
Bad scenario as follows (mclk-fs = 256):
- Initialize sysclk by correct value (Ex. 12.288MHz)
- ES8316 set constraints of PCM rate by sysclk
48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400),
24kHz (1/512), 16kHz (1/768), 12kHz (1/1024)
- Play 48kHz sound, it's acceptable
- Sysclk is not changed
- Play 32kHz sound, it's acceptable
- Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256)
- ES8316 set constraints of PCM rate by sysclk
32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400),
16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)
- Play 48kHz again, but it's NOT acceptable because constraints
list does not allow 48kHz
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes redundant null checks for optional MCLK clock.
And fix DT binding document for changing clock property to optional
from required.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 1137ceee76 ("ARM: OMAP1: ams-delta: Don't request unused
GPIOs"), on-board audio has appeared muted. It has been discovered that
believed to be unused GPIO pins "hookflash1" and "hookflash2" need to be
set low for audible sound in handsfree and handset mode respectively.
According to Amstrad E3 wiki, the purpose of both pins hasn't been
clearly identified. Original Amstrad software used to produce a high
pulse on them when the phone was taken off hook or recall was pressed.
With the current findings, we can assume the pins provide a kind of
audio mute function, separately for handset and handsfree operation
modes.
Commit 2afdb4c41d ("ARM: OMAP1: ams-delta: Fix audio permanently
muted") attempted to fix the issue temporarily by hogging the GPIO pin
"hookflash1" renamed to "audio_mute", however the fix occurred
incomplete as it restored audible sound only for handsfree mode.
Stop hogging that pin, rename the pins to "handsfree_mute" and
"handset_mute" respectively and implement appropriate DAPM event
callbacks for "Speaker" and "Earpiece" DAPM widgets.
Fixes: 1137ceee76 ("ARM: OMAP1: ams-delta: Don't request unused GPIOs")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190907111650.15440-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for
other purposes.
Currently it is left empty with the dmaengine-pcm, in this case copy the
pcm->id string as pcm->name.
For example IGT is using this to find the HDMI PCM for testing audio on it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Arthur She <arthur.she@linaro.org>
Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pci express variant of the digigram lx6464es card has a different
device ID, but works without changes to the driver.
Thanks to Nikolas Slottke for reporting and testing.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Link: https://lore.kernel.org/r/20190906082119.40971-1-tim@klingt.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The destructor of AMDTP domain has WARN_ON() for the list of associated
AMDTP stream. Although this reminds a case that developers forget to
program consumer drivers to stop AMDTP domain, it hits when AMDTP domain
is not initialized yet. This occurs when initialization of sound card
fails as well and it's superfluous.
This commit removes the WARN_ON. Although the API to AMDTP domain does
nothing, it's left for future usage.
Fixes: 3ec3d7a3ff ("ALSA: firewire-lib: add AMDTP domain structure to handle several isoc contexts")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190906131414.15370-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TASCAM FE-8 is the rest of model in TASCAM FireWire series. This device
has no functionality to process audio signal and MIDI messages. Instead,
it transfers control messages to host system corresponding to operations
for some faders, buttons and knobs on its surface.
Unlike the other devices in this series, the control messages are
transmitted by asynchronous transactions. Some registers of device are
used for registration of destination address for the transaction. The
transaction includes quadlet-aligned data up to 32 quadlets.
Userspace applications can receive the transaction and parse it for
control message via Linux FireWire subsystem, without any support by
ALSA firewire-tascam driver. Therefore the driver gives no support
for it.
This commit removes placeholder for FE-8 and add some comment for its
functionalities as notes.
$ python2 linux-firewire-utils/src/crpp < ~/git/am-config-rom/tascam/tascam-fe8.img
ROM header and bus information block
-----------------------------------------------------------------
400 040f4798 bus_info_length 4, crc_length 15, crc 18328 (should be 14256)
404 31333934 bus_name "1394"
408 20ff7002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 00022eff company_id 00022e |
410 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
root directory
-----------------------------------------------------------------
414 0004bccc directory_length 4, crc 48332
418 0300022e vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003eda4 directory_length 3, crc 60836
42c 1200022e specifier id
430 13800001 version
434 d4000004 --> dependent info directory at 444
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002461e leaf_length 2, crc 17950
43c 00022eff company_id 00022e |
440 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
dependent info directory at 444
-----------------------------------------------------------------
444 0002ae47 directory_length 2, crc 44615
448 81000002 --> descriptor leaf at 450
44c 82000006 --> bus dependent info leaf at 464
descriptor leaf at 450
-----------------------------------------------------------------
450 0004a79e leaf_length 4, crc 42910
454 00000000 textual descriptor
458 00000000 minimal ASCII
45c 54415343 "TASC"
460 414d0000 "AM"
bus dependent info leaf at 464
-----------------------------------------------------------------
464 0004a7d8 leaf_length 4, crc 42968
468 00000000
46c 00000000
470 46452d38
474 00000000
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190906125544.13800-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This notebook has 6 built in speakers for 5.1 surround support, however
only two got autodetected and have also not been assigned correctly.
This patch enables all speakers and also fixes muting when headphones are
plugged in.
The speaker layout is as follows:
pin 0x15 Front Left / Front Right
pin 0x18 Front Center / Subwoofer
pin 0x1b Rear Left / Rear Right (Surround)
The quirk will be enabled automatically on this hardware, but can also be
activated manually via the model=aspire-ethos module parameter.
Caveat: pin 0x1b is shared between headphones jack and surround speakers.
When headphones are plugged in, the surround speakers get muted
automatically by the hardware, however all other speakers remain
unmuted. Currently it's not possible to make use of the generic automute
function in the driver, because such shared pins are not supported.
If we would change the pin settings to identify the pin as headphones,
the surround channel and thus the ability to select 5.1 profiles would
get lost.
This quirk solves the above problem by monitoring jack state of 0x1b and
by connecting/disconnecting all remaining speaker pins when something
gets plugged in or unplugged from the headphones jack port.
Signed-off-by: Sergey Bostandzhyan <jin@mediatomb.cc>
Link: https://lore.kernel.org/r/20190906093343.GA7640@xn--80adja5bqm.su
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable pcm_idx is being initialized with a value that is never read
and is being re-assigned immediately afterwards. The assignment is
redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190905154826.5916-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small HD-audio fixes:
- A regression fix for Realtek codecs due to the recent initialization
procedure change
- A fix for potential endless loop at the quirk table lookup
- Quirks for Lenovo, ASUS and HP machines
-----BEGIN PGP SIGNATURE-----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=SHx5
-----END PGP SIGNATURE-----
Merge tag 'sound-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small HD-audio fixes:
- A regression fix for Realtek codecs due to the recent
initialization procedure change
- A fix for potential endless loop at the quirk table lookup
- Quirks for Lenovo, ASUS and HP machines"
* tag 'sound-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix the problem of two front mics on a ThinkCentre
ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL
ALSA: hda/realtek - Add quirk for HP Pavilion 15
ALSA: hda/realtek - Fix overridden device-specific initialization
ALSA: hda - Fix potential endless loop at applying quirks
When do compile test, if SND_SOC_SOF_OF is not set, we get:
sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_request':
imx8.c:(.text+0xb0): undefined reference to `snd_sof_ipc_msgs_rx'
sound/soc/sof/imx/imx8.o: In function `imx8_ipc_msg_data':
imx8.c:(.text+0xf4): undefined reference to `sof_mailbox_read'
sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_reply':
imx8.c:(.text+0x160): undefined reference to `sof_mailbox_read'
Make SND_SOC_SOF_IMX_TOPLEVEL always depends on SND_SOC_SOF_OF
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190905064400.24800-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the sm1, the TDMOUT number of input is extended and the
the gain enable bit moved to accommodate this extension
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-9-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TDMIN component, as it, has a maximum of 16 input. Depending on
the SoC, these may not all be connected.
Instead of decribing only the connected inputs of each SoC, describe
them all and let ASoC routing do the rest.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TODDR component, as it, has a maximum of 8 input. Depending on
the SoC, these may not all be connected or some input components may
not be supported
Instead of decribing only the connected inputs, describe them all
and let ASoC routing do the rest.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FRDDR component, as it, has a maximum of 8 outputs. Depending on
the SoC, these may not all be connected.
Instead of decribing only the connected outputs of each SoC, describe
them all and let ASoC routing do the rest.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reading out the link-name earlier and including it in the various error
messages makes it much more convenient to figure out what links have
unmet dependencies.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20190905040306.21399-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Basically, driver which setups snd_soc_component_set_jack() need
to release it by themselves. But, as framework level robustness,
soc_remove_component() also releases it.
To avoid code reader confuse, this patch makes it clarify.
This patch makes it clarify.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zm8q5n8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904083909.18804-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904083412.18700-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904082507.24300-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904074833.23572-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the local hack with the dma_can_mmap helper to check if
a given device supports mapping DMA allocations to userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
This ThinkCentre machine has a new realtek codec alc222, it is not
in the support list, we add it in the realtek.c then this machine
can apply FIXUPs for the realtek codec.
And this machine has two front mics which can't be handled
by PA so far, it uses the pin 0x18 and 0x19 as the front mics, as
a result the existing FIXUP ALC294_FIXUP_LENOVO_MIC_LOCATION doesn't
work on this machine. Fortunately another FIXUP
ALC283_FIXUP_HEADSET_MIC also can change the location for one of the
two mics on this machine.
Link: https://lore.kernel.org/r/20190904055327.9883-1-hui.wang@canonical.com
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduce clock property for MCLK master freq control.
Driver will set rate of MCLK master if set_sysclk is called and
changing sysclk by board driver.
[Modified slightly to apply without an earlier patch in the series due
to context diffs -- broonie]
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190903165322.20791-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC try to rebind Sound Card if Card/CPU/Codec/Platform
were unbinded and re-binded again.
But, Audio Graph Card might can't rebind again if user do for example
unbind CPU or Codec driver
bind CPU or Codec driver
Because Audio Graph Card is still pointing old/unbinded
CPU or Codec driver's DAI name at dlc->dai_name.
To avoid this issue, it needs to alloc memory and keep DAI name
even though if CPU or Codec driver was unbinded.
Or, always do unbind/bind at Sound Card.
For now, this patch indicates this issue as FIXME.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpdu75m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC try to rebind Sound Card if Card/CPU/Codec/Platform
were unbinded and re-binded again.
But, Simple Card might can't rebind again if user do for example
unbind CPU or Codec driver
bind CPU or Codec driver
Because Simple Card is still pointing old/unbinded
CPU or Codec driver's DAI name at dlc->dai_name.
To avoid this issue, it needs to alloc memory and keep DAI name
even though if CPU or Codec driver was unbinded.
Or, always do unbind/bind at Sound Card.
For now, this patch indicates this issue as FIXME.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9tu75x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Original pin node values of ASUS UX431FL with ALC294:
0x12 0xb7a60140
0x13 0x40000000
0x14 0x90170110
0x15 0x411111f0
0x16 0x411111f0
0x17 0x90170111
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x4066852d
0x1e 0x411111f0
0x1f 0x411111f0
0x21 0x04211020
1. Has duplicated internal speakers (0x14 & 0x17) which makes the output
route become confused. So, the output volume cannot be changed by
setting.
2. Misses the headset mic pin node.
This patch disables the confusing speaker (NID 0x14) and enables the
headset mic (NID 0x19).
Link: https://lore.kernel.org/r/20190902100054.6941-1-jian-hong@endlessm.com
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Pavilion 15 (AMD Ryzen-based model) with 103c:84e7 needs the same
quirk like HP Envy/Spectre x360 for enabling the mute LED over Mic3 pin.
[ rearranged in the SSID number order by tiwai ]
Signed-off-by: Sam Bazley <sambazley@fastmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_probe_link_components() has paired soc_remove_link_components(),
but, these are implemented at different place.
So it is difficult to confirm code.
This patch moves soc_probe_link_components() next to
soc_remove_link_components().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o90g7lbd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc-dapm has snd_soc_dapm_free() which cleanups debugfs, widgets, list.
But, there is no paired initialize function.
This patch adds snd_soc_dapm_init() and initilaizing dapm
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnkw7lbj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC setups some dapm related member at
snd_soc_component_initialize() which is called when component was
registered, and setups remaining member at soc_probe_component()
which is called when component was probed.
This kind of setup separation is no meanings, and it is very
difficult to read and confusable.
This patch setups all dapm settings at one place.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r25c7lbo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_probe_comonent() has paired soc_remove_comonent(),
but, these are implemented at different place.
So it is difficult to confirm code.
This patch moves soc_probe_component() next to
soc_remove_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgps7lbt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_rtd_init() was soc_post_component_init(), but there was no
its paired soc_post_component_free(), but it is done at
soc_remove_link_dais().
This means it is difficult to find related code.
This patch adds soc_rtd_free() which is paired soc_rtd_init().
soc_rtd_xxx() will be more cleanuped in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tva87lby.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The forward declaration of mt8183_mt6358_ts3a227_max98357_headset_init
is for cyclic dependency between card, headset_dev, and headset_init.
It used to be:
- card depends on headset_dev
- headset_dev depends on headset_init
- headset_init depends on card
Commit a962a809e5 ("ASoC: mediatek: mt8183: make headset codec
optional") removed the cyclic dependency.
Thus, it is safe to remove the forward declaration.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190830074240.195166-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move headset jack descriptor from module global scope to card-specific
storage to make its ownership more explicit.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190830074240.195166-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move private structure to the beginning of file to declare earlier
so that most functions can see it.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190830074240.195166-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should only select SND_INTEL_NHLT when ACPI is defined. This was
done for the legacy HDAudio driver but not for DSP-enabled cases,
leading to compilation errors with randconfig.
Fix by aligning on the same solution.
For the Skylake driver this is overkill since there is a top-level
dependency on ACPI, but it doesn't hurt and it's better to have
consistency.
Fixes: 68b953aeb5 ('ASoC: SOF: Intel: hda: fixup HDaudio topology name with DMIC number')
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190829214213.11653-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With legacy ADSP private context adjusted, there is no need for double
safety.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-5-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With legacy ADSP private context adjusted, there is no need for double
safety.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-4-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With legacy ADSP private context adjusted, there is no need for double
safety.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-3-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Apart from Haswell machines, all other devices have their private data
set to snd_soc_acpi_mach instance.
Changes for HSW/ BDW boards introduced with series:
https://patchwork.kernel.org/cover/10782035/
added support for dai_link platform_name adjustments within card probe
routines. These take for granted private_data points to
snd_soc_acpi_mach whereas for Haswell, it's sst_pdata instead. Change
private context of platform_device - representing machine board - to
address this.
Fixes: e87055d732 ("ASoC: Intel: haswell: platform name fixup support")
Fixes: 7e40ddcf97 ("ASoC: Intel: bdw-rt5677: platform name fixup support")
Fixes: 2d067b2807 ("ASoC: Intel: broadwell: platform name fixup support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190822113616.22702-2-cezary.rojewski@intel.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The davinci McBSP (davinci-i2s) driver does not implement the set_sysclk
callback, which is fine and should not be treated as error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-5-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the daVinci devices does not boot with DT. In this case the DMA
channel is looked up with dma_slave_map and for that the chan_names[]
must be configured.
Both McASP and ASP/McBSP uses "tx" and "rx" as channel names, so we can
just do this when the dev->of_node is not valid.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-4-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASP/McBSP can support 8/16/20/24/32 bits word in theory. I have only tested
S16_LE and S32_LE, the other formats might not work so only extend the
supported formats with S32_LE for now.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the driver uses snd_soc_rtdcom_lookup() in it's mcbsp_start
function to try to stop/restart the DMA as the initial XSYNCERR workaround
need to be done before the DMA is armed.
There are couple of things wrong with this:
- the driver crashes with NULL pointer dereference as the
component->driver->ops is actually NULL
- the driver should not use snd_soc_rtdcom_lookup() in the first place
- Fiddling with DMA is never a good thing
Move the workaround handling to .prepare which is called before the DMA is
armed, so it complies with the requirements.
Reported-by (usage of snd_soc_rtdcom_lookup): Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190830103841.25128-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent change to shuffle the codec initialization procedure for
Realtek via commit 607ca3bd22 ("ALSA: hda/realtek - EAPD turn on
later") caused the silent output on some machines. This change was
supposed to be safe, but it isn't actually; some devices have quirk
setups to override the EAPD via COEF or BTL in the additional verb
table, which is applied at the beginning of snd_hda_gen_init(). And
this EAPD setup is again overridden in alc_auto_init_amp().
For recovering from the regression, tell snd_hda_gen_init() not to
apply the verbs there by a new flag, then apply the verbs in
alc_init().
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727
Fixes: 607ca3bd22 ("ALSA: hda/realtek - EAPD turn on later")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU 4pre was launched in 2012 by MOTU, Inc. This commit allows userspace
applications can transmit and receive PCM frames and MIDI messages for
this model via ALSA PCM interface and RawMidi/Sequencer interfaces.
The device supports MOTU protocol version 3. Unlike the other devices, the
device is simply designed. The size of data block is fixed to 10 quadlets
during available sampling rates (44.1 - 96.0 kHz). Each data block
includes 1 source packet header, 2 data chunks for messages, 8 data chunks
for PCM samples and 2 data chunks for padding to quadlet alignment. The
device has no MIDI, optical, BNC and AES/EBU interfaces.
Like support for the other MOTU devices, the quality of playback sound
is not enough good with periodical noise yet.
$ python2 crpp < ~/git/am-config-rom/motu/motu-4pre.img
ROM header and bus information block
-----------------------------------------------------------------
400 041078cc bus_info_length 4, crc_length 16, crc 30924
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 0003ceda directory_length 3, crc 52954
42c 120001f2 specifier id
430 13000045 version
434 17103800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002d248 leaf_length 2, crc 53832
43c 0001f200 company_id 0001f2 |
440 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Append fallthrough statement to fix warning reported during compilation.
Fixes: b80d19c166 ("ASoC: Intel: Restore Baytrail ADSP streams only when ADSP was in reset")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190828095102.15737-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The test case is
arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav &
aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav
There will be error after end of arecord:
aplay: pcm_write:2051: write error: Input/output error
Capture and Playback work in parallel in master mode, one
substream stops, the other substream is impacted, the
reason is that clock is disabled wrongly.
The clock's reference count is not increased when second
substream starts, the hw_param() function returns in the
beginning because first substream is enabled, then in end
of first substream, the hw_free() disables the clock.
This patch is to move the clock enablement to the place
before checking of the device enablement in hw_param().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When introducing the list of packet descriptor, for rx packet, the
calculation of scheduled isoc cycle is omitted. This commit fixes the
bug.
Fixes: f4f6ae7b7c ("ALSA: firewire-lib: use packet descriptor for IT context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When introducing AMDTP domain to ALSA dice driver, error path does not
handle error correctly. This commit fixes the bug.
Fixes: e9f21129b8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the chained quirks via chained_before flag is applied before the
depth check, it may lead to the endless recursive calls, when the
chain were set up incorrectly. Fix it by moving the depth check at
the beginning of the loop.
Fixes: 1f57825077 ("ALSA: hda - Add chained_before flag to the fixup entry")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On this codec SLIMBus RX path supports 384000 rate on primary interpolator.
Add this missing rate as supported rate.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190822095653.7200-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the modern codecs supports 352.8KHz and 384KHz sample rates.
Currenlty HW params fails to set 352.8Kz and 384KHz sample rate
as these are not in known rates list.
Add these new rates to known list to allow them.
This patch also adds defines in pcm.h so that drivers can use it.
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190822095653.7200-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Bard Liao