Draining the middle of a link is tricky, so leave a comment there
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the non-vectored variant of READV/WRITEV, we don't need to setup an
async io context, and we flag that appropriately in the io_op_defs
array. However, in fixing this for the 5.5 kernel in commit 74566df3a7
we didn't have these opcodes, so the check there was added just for the
READ_FIXED and WRITE_FIXED opcodes. Replace that check with just a
single check for needing async context, that covers all four of these
read/write variants that don't use an iovec.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All of these functions are only called from CephFS, so move them into
ceph.ko, and drop the exports.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's hard to read, especially when it is:
ceph: __choose_mds 00000000b7bc9c15 is_hash=1 (-271041095) mode 0
At the same time, switch to __func__ to get rid of the checkpatch
warning.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Instead of using the copy-from operation, switch copy_file_range to the
new copy-from2 operation, which allows to send the truncate_seq and
truncate_size parameters.
If an OSD does not support the copy-from2 operation it will return
-EOPNOTSUPP. In that case, the kernel client will stop trying to do
remote object copies for this fs client and will always use the generic
VFS copy_file_range.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move s_ref up to plug a 4 byte hole, which plugs another.
Move r_kref to shave 8 bytes off per request on x86_64.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The total bytes may potentially be larger than 8.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just in case the session's refcount reach 0 and is releasing, and
if we get the session without checking it, we may encounter kernel
crash.
Rename get_session to ceph_get_mds_session and make it global.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:
$ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/
In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:
ceph: mount opening path //
ceph: open_root_inode opening '//'
ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1
ceph: alloc_inode 00000000dc4ca00b
ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1
ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b
And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():
BUG_ON(ceph_snap(dir) != dvino.snap);
Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.
1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"
Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.
URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.
Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.
Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In the debug logs about the di->offset or ctx->pos it is in hex
format, but some others are using the dec format. It is a little
hard to read.
For the xattr version, it is u64 type, using a shorter type may
truncate it.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For the caps having no any subset mask requested we shouldn't touch
them.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, we could have an open-by-handle (or NFS server) call
into the filesystem and start working with an inode before it's
properly filled out.
Don't clear I_NEW until we have filled out the inode, and discard it
properly if that fails. Note that we occasionally take an extra
reference to the inode to ensure that we don't put the last reference in
discard_new_inode, but rather leave it for ceph_async_iput.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If max_mds > 1 and a request is submitted that chooses a random mds
rank, and the relating session is not opened yet, the request will wait
until the session has been opened and resend again.
Every time the request goes through __do_request, it will release the
req->session first and choose a random one again, which may be a
completely different rank than the one it just waited on.
In the worst case, it will open all the mds sessions one by one just
before the request can be successfully sent out.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If all the MDS daemons are down for some reason, then the first mount
attempt will fail with EIO after the mount request times out. A mount
attempt will also fail with EIO if all of the MDS's are laggy.
This patch changes the code to return -EHOSTUNREACH in these situations
and adds a pr_info error message to help the admin determine the cause.
URL: https://tracker.ceph.com/issues/4386
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When reconnecting the session but if it is denied by the MDS due
to client was in blacklist or something else, kclient will receive
a session close reply, and we will never see the important log:
"ceph: mds%d reconnect denied"
And with the confusing log:
"ceph: handle_session mds0 close 0000000085804730 state ??? seq 0"
Let's keep the session state until its memories is released.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the caller passes in a NULL cap_reservation, and we can't allocate
one then ensure that we fail gracefully.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
During umount, if there has no any unsafe request in the mdsc and
some requests still in-flight and not got reply yet, and if the
rest requets are all safe ones, after that even all of them in mdsc
are unregistered, the umount must wait until after mount_timeout
seconds anyway.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Even the MDS is in up:active state, but it also maybe laggy. Here
will skip the laggy MDSs.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case the max_mds > 1 in MDS cluster and there is no any standby
MDS and all the max_mds MDSs are in up:active state, if one of the
up:active MDSs is dead, the m->m_num_laggy in kclient will be 1.
Then the mount will fail without considering other healthy MDSs.
There manybe some MDSs still "in" the cluster but not in up:active
state, we will ignore them. Only when all the up:active MDSs in
the cluster are laggy will treat the cluster as not be available.
In case decreasing the max_mds, the cluster will not stop the extra
up:active MDSs immediately and there will be a latency. During it
the up:active MDS number will be larger than the max_mds, so later
the m_info memories will 100% be reallocated.
Here will pick out the up:active MDSs as the m_num_mds and allocate
the needed memories once.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_pagelist_encode_string() will not fail in reserved case,
also, we do not check err code here, so remove unnecessary
assignment.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We print session's refcount in debug message inside
ceph_put_mds_session() and get_session(), so we don't have to
print it in con_get()/__ceph_lookup_mds_session()/con_put().
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR, just use
PTR_ERR_OR_ZERO directly.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
RHBZ 1336264
When we extend a file we must also force the size to be updated.
This fixes an issue with holetest in xfs-tests which performs the following
sequence :
1, create a new file
2, use fallocate mode==0 to populate the file
3, mmap the file
4, touch each page by reading the mmapped region.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1760879
Fix an oops in match_prepath() by making sure that the prepath string is not
NULL before we pass it into strcmp().
This is similar to other checks we make for example in cifs_root_iget()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with "modefromsid" mount parm most servers will require
that some default permissions are given to users in the ACL on newly
created files, files created with the new 'sd context' - when passing in
an sd context on create, permissions are not inherited from the parent
directory, so in addition to the ACE with the special SID which contains
the mode, we also must pass in an ACE allowing users to access the file
(GENERIC_ALL for authenticated users seemed like a reasonable default,
although later we could allow a mount option or config switch to make
it GENERIC_ALL for EVERYONE special sid).
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This is needed for backup/restore scenarios among others.
Add extended attribute "system.cifs_ntsd" (and alias "system.smb3_ntsd")
to allow for setting owner and DACL in the security descriptor. This is in
addition to the existing "system.cifs_acl" and "system.smb3_acl" attributes
that allow for setting DACL only. Add support for setting creation time and
dos attributes using set_file_info() calls to complement the existing
support for getting these attributes via query_path_info() calls.
Signed-off-by: Boris Protopopov <bprotopopov@hotmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
fs/cifs/smb2pdu.c: In function 'SMB2_query_directory':
fs/cifs/smb2pdu.c:4444:26: warning:
variable 'server' set but not used [-Wunused-but-set-variable]
struct TCP_Server_Info *server;
It is not used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Starting from 4a367dc044, we must set the mount options based on the
DFS full path rather than the resolved target, that is, cifs_mount()
will be responsible for resolving the DFS link (cached) as well as
performing failover to any other targets in the referral.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reported-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 4a367dc044 ("cifs: Add support for failover in cifs_mount()")
Link: https://lore.kernel.org/linux-cifs/39643d7d-2abb-14d3-ced6-c394fab9a777@prodrive-technologies.com
Tested-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
static analysis with Coverity detected an issue with the following
commit:
Author: Paulo Alcantara (SUSE) <pc@cjr.nz>
Date: Wed Dec 4 17:38:03 2019 -0300
cifs: Avoid doing network I/O while holding cache lock
Addresses-Coverity: ("Uninitialized pointer read")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
copy_ref_data() may return error, it should be
returned to upstream caller.
Fixes: 03535b72873b ("cifs: Avoid doing network I/O while holding cache lock")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When creating or updating a cache entry, we need to get an DFS
referral (get_dfs_referral), so avoid holding any locks during such
network operation.
To prevent that, do the following:
* change cache hashtable sync method from RCU sync to a read/write
lock.
* use GFP_ATOMIC in memory allocations.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't acquire volume lock while refreshing the DFS cache because
cifs_reconnect() may call dfs_cache_update_vol() while we are walking
through the volume list.
To prevent that, make vol_info refcounted, create a temp list with all
volumes eligible for refreshing, and then use it without any locks
held.
Besides, replace vol_lock with a spinlock and protect cache_ttl from
concurrent accesses or changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Just do the trivial path validation in get_normalized_path().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add helpers for finding TCP connections that are good candidates for
being used by DFS refresh worker.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The DFS cache API is mostly used with heap allocated strings.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Do some renaming and code cleanup.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't use iov_iter::type directly, but rather use the new accessor
functions that have been added. This allows the .type field to be split
and rearranged without the need to update the filesystems.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two places where we need to adjust down the max response size for
ioctl when it is used together with compounding.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Combine the initial SMB2_Open and the first SMB2_Query_Directory in a compound.
This shaves one round-trip of each directory listing, changing it from 4 to 3
for small directories.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Fixes coccicheck warning:
fs/cifs/cifssmb.c:4622:3-22: WARNING: Assignment of 0/1 to bool variable
fs/cifs/cifssmb.c:4756:3-22: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes coccicheck warning:
fs/cifs/smb2ops.c:807:2-36: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Instead of passing __func__ to the error reporting function, let's use
the return address builtins so that the messages actually tell you which
higher level function called the buffer functions. This was previously
true for the xfs_buf_read callers, but not for the xfs_trans_read_buf
callers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Drop the null buffer pointer checks in all code that calls
xfs_alloc_read_agf and doesn't pass XFS_ALLOC_FLAG_TRYLOCK because
they're no longer necessary.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor xfs_read_agf and xfs_alloc_read_agf to return EAGAIN if the
caller passed TRYLOCK and we weren't able to get the lock; and change
the callers to recognize this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove the xfs_btree_get_bufs and xfs_btree_get_bufl functions, since
they're pretty trivial oneliners.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_trans_get_buf() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_trans_get_buf_map() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_buf_read() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_buf_get_uncached() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_buf_get() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_buf_read_map() to return numeric error codes like most
everywhere else in xfs. This involves moving the open-coded logic that
reports metadata IO read / corruption errors and stales the buffer into
xfs_buf_read_map so that the logic is all in one place.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert xfs_buf_get_map() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Convert _xfs_buf_alloc() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
-----BEGIN PGP SIGNATURE-----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=5jvb
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.5-2020-01-26' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Fix for two regressions in this cycle, both reported by the postgresql
use case.
One removes the added restriction on who can submit IO, making it
possible for rings shared across forks to do so. The other fixes an
issue for the same kind of use case, where one exiting process would
cancel all IO"
* tag 'io_uring-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
io_uring: don't cancel all work on process exit
Revert "io_uring: only allow submit from owning task"
Pull vfs fix from Al Viro:
"Fix a use-after-free in do_last() handling of sysctl_protected_...
checks.
The use-after-free normally doesn't happen there, but race with
rename() and it becomes possible"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_last(): fetch directory ->i_mode and ->i_uid before it's too late
If we're sharing the ring across forks, then one process exiting means
that we cancel ALL work and prevent future work. This is overly
restrictive. As long as we cancel the work associated with the files
from the current task, it's safe to let others persist. Normal fd close
on exit will still wait (and cancel) pending work.
Fixes: fcb323cc53 ("io_uring: io_uring: add support for async work inheriting files")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This ends up being too restrictive for tasks that willingly fork and
share the ring between forks. Andres reports that this breaks his
postgresql work. Since we're close to 5.5 release, revert this change
for now.
Cc: stable@vger.kernel.org
Fixes: 44d282796f ("io_uring: only allow submit from owning task")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The afs filesystem needs to prohibit certain characters from cell names,
such as '/', as these are used to form filenames in procfs, leading to
the following warning being generated:
WARNING: CPU: 0 PID: 3489 at fs/proc/generic.c:178
Fix afs_alloc_cell() to disallow nonprintable characters, '/', '@' and
names that begin with a dot.
Remove the check for "@cell" as that is then redundant.
This can be tested by running:
echo add foo/.bar 1.2.3.4 >/proc/fs/afs/cells
Note that we will also need to deal with:
- Names ending in ".invalid" shouldn't be passed to the DNS.
- Names that contain non-valid domainname chars shouldn't be passed to
the DNS.
- DNS replies that say "your-dns-needs-immediate-attention.<gTLD>" and
replies containing A records that say 127.0.53.53 should be
considered invalid.
[https://www.icann.org/en/system/files/files/name-collision-mitigation-01aug14-en.pdf]
but these need to be dealt with by the kafs-client DNS program rather
than the kernel.
Reported-by: syzbot+b904ba7c947a37b4b291@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
may_create_in_sticky() call is done when we already have dropped the
reference to dir.
Fixes: 30aba6656f (namei: allow restricted O_CREAT of FIFOs and regular files)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=IPUk
-----END PGP SIGNATURE-----
Merge tag 'for-5.5-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Here's a last minute fix for a regression introduced in this
development cycle.
There's a small chance of a silent corruption when device replace and
NOCOW data writes happen at the same time in one block group. Metadata
or COW data writes are unaffected.
The extra fixup patch is there to silence an unnecessary warning"
* tag 'for-5.5-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: dev-replace: remove warning for unknown return codes when finished
btrfs: scrub: Require mandatory block group RO for dev-replace
This code accidentally returns success, but it should return the
-EIO error code from adfs_fplus_validate_header().
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: d79288b4f6 ("fs/adfs: bigdir: calculate and validate directory checkbyte")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The fstests btrfs/011 triggered a warning at the end of device replace,
[ 1891.998975] BTRFS warning (device vdd): failed setting block group ro: -28
[ 1892.038338] BTRFS error (device vdd): btrfs_scrub_dev(/dev/vdd, 1, /dev/vdb) failed -28
[ 1892.059993] ------------[ cut here ]------------
[ 1892.063032] WARNING: CPU: 2 PID: 2244 at fs/btrfs/dev-replace.c:506 btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs]
[ 1892.074346] CPU: 2 PID: 2244 Comm: btrfs Not tainted 5.5.0-rc7-default+ #942
[ 1892.079956] RIP: 0010:btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs]
[ 1892.096576] RSP: 0018:ffffbb58c7b3fd10 EFLAGS: 00010286
[ 1892.098311] RAX: 00000000ffffffe4 RBX: 0000000000000001 RCX: 8888888888888889
[ 1892.100342] RDX: 0000000000000001 RSI: ffff9e889645f5d8 RDI: ffffffff92821080
[ 1892.102291] RBP: ffff9e889645c000 R08: 000001b8878fe1f6 R09: 0000000000000000
[ 1892.104239] R10: ffffbb58c7b3fd08 R11: 0000000000000000 R12: ffff9e88a0017000
[ 1892.106434] R13: ffff9e889645f608 R14: ffff9e88794e1000 R15: ffff9e88a07b5200
[ 1892.108642] FS: 00007fcaed3f18c0(0000) GS:ffff9e88bda00000(0000) knlGS:0000000000000000
[ 1892.111558] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1892.113492] CR2: 00007f52509ff420 CR3: 00000000603dd002 CR4: 0000000000160ee0
[ 1892.115814] Call Trace:
[ 1892.116896] btrfs_dev_replace_by_ioctl+0x35/0x60 [btrfs]
[ 1892.118962] btrfs_ioctl+0x1d62/0x2550 [btrfs]
caused by the previous patch ("btrfs: scrub: Require mandatory block
group RO for dev-replace"). Hitting ENOSPC is possible and could happen
when the block group is set read-only, preventing NOCOW writes to the
area that's being accessed by dev-replace.
This has happend with scratch devices of size 12G but not with 5G and
20G, so this is depends on timing and other activity on the filesystem.
The whole replace operation is restartable, the space state should be
examined by the user in any case.
The error code is propagated back to the ioctl caller so the kernel
warning is causing false alerts.
Signed-off-by: David Sterba <dsterba@suse.com>
__jbd2_journal_abort_hard() is no longer used, so now we can merge
__jbd2_journal_abort_hard() and __journal_abort_soft() these two
functions into jbd2_journal_abort() and remove them.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit fb7c02445c ("ext4: pass -ESHUTDOWN code to jbd2 layer") want
to allow jbd2 layer to distinguish shutdown journal abort from other
error cases. So the ESHUTDOWN should be taken precedence over any other
errno which has already been recoded after EXT4_FLAGS_SHUTDOWN is set,
but it only update errno in the journal suoerblock now if the old errno
is 0.
Fixes: fb7c02445c ("ext4: pass -ESHUTDOWN code to jbd2 layer")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2
aborted, and then __ext4_abort() and ext4_handle_error() can invoke
panic if ERRORS_PANIC is specified. But if the journal has been aborted
with zero errno, jbd2_journal_abort() didn't set this flag so we can
no longer panic. Fix this by always record the proper errno in the
journal superblock.
Fixes: 4327ba52af ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We invoke jbd2_journal_abort() to abort the journal and record errno
in the jbd2 superblock when committing journal transaction besides the
failure on submitting the commit record. But there is no need for the
case and we can also invoke jbd2_journal_abort() instead of
__jbd2_journal_abort_hard().
Fixes: 818d276ceb ("ext4: Add the journal checksum feature")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only when jh->b_jcount = 0 in jbd2_journal_put_journal_head, we are allowed
to call __journal_remove_journal_head. This assertion is meaningless,
just remove it.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123070054.50585-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Show pblock only if it has meaningful value.
# before
ext4:ext4_es_lookup_extent_exit: dev 253,0 ino 12 found 1 [1/4294967294) 576460752303423487 H
ext4:ext4_es_lookup_extent_exit: dev 253,0 ino 12 found 1 [2/4294967293) 576460752303423487 HR
# after
ext4:ext4_es_lookup_extent_exit: dev 253,0 ino 12 found 1 [1/4294967294) 0 H
ext4:ext4_es_lookup_extent_exit: dev 253,0 ino 12 found 1 [2/4294967293) 0 HR
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20191114200147.1073-2-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.
For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).
[root@hades mnt_ext4]# repquota -P -a
*** Report for project quotas on device /dev/loop0
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
Project used soft hard grace used soft hard grace
----------------------------------------------------------------------
0 -- 13 0 0 2 0 0
123 -- 10237 20480 10240 5 200 100
The result of df command as below:
[root@hades mnt_ext4]# df -h test_dir
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 20M 10M 10M 50% /home/cgxu/test/mnt_ext4
Even though it looks like there is another 10M free space to use,
if we write new data to diretory test_dir(inherit project id),
the write will fail with errno(-EDQUOT).
After this patch, the df result looks like below.
[root@hades mnt_ext4]# df -h test_dir
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 10M 10M 3.0K 100% /home/cgxu/test/mnt_ext4
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191016022501.760-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ->d_compare() and ->d_hash() can be called in RCU-walk mode,
->d_parent and ->d_inode can be concurrently modified, and in
particular, ->d_inode may be changed to NULL. For ext4_d_hash() this
resulted in a reproducible NULL dereference if a lookup is done in a
directory being deleted, e.g. with:
int main()
{
if (fork()) {
for (;;) {
mkdir("subdir", 0700);
rmdir("subdir");
}
} else {
for (;;)
access("subdir/file", 0);
}
}
... or by running the 't_encrypted_d_revalidate' program from xfstests.
Both repros work in any directory on a filesystem with the encoding
feature, even if the directory doesn't actually have the casefold flag.
I couldn't reproduce a crash in ext4_d_compare(), but it appears that a
similar crash is possible there.
Fix these bugs by reading ->d_parent and ->d_inode using READ_ONCE() and
falling back to the case sensitive behavior if the inode is NULL.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: b886ee3e77 ("ext4: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200124041234.159740-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return EINVAL rather than ERANGE for mount parse errors as the userspace
mount command doesn't necessarily understand what to do with anything other
than EINVAL.
The old code returned -ERANGE as an intermediate error that then get
converted to -EINVAL, whereas the new code returns -ERANGE.
This was induced by passing minorversion=1 to a v4 mount where
CONFIG_NFS_V4_1 was disabled in the kernel build.
Fixes: 68f65ef40e1e ("NFS: Convert mount option parsing to use functionality from fs_parser.h")
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a kernel config CONFIG_NFS_DISABLE_UDP_SUPPORT to disallow NFS
UDP mounts and enable it by default.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the server is unavaliable, we want to allow the revalidating
lookup to time out, and to default to validating the cached dentry
if the 'softreval' mount option is set.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The allocation mask is no longer used by on_each_cpu_cond() and
on_each_cpu_cond_mask() and can be removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200117090137.1205765-4-bigeasy@linutronix.de
Since ->d_compare() and ->d_hash() can be called in RCU-walk mode,
->d_parent and ->d_inode can be concurrently modified, and in
particular, ->d_inode may be changed to NULL. For f2fs_d_hash() this
resulted in a reproducible NULL dereference if a lookup is done in a
directory being deleted, e.g. with:
int main()
{
if (fork()) {
for (;;) {
mkdir("subdir", 0700);
rmdir("subdir");
}
} else {
for (;;)
access("subdir/file", 0);
}
}
... or by running the 't_encrypted_d_revalidate' program from xfstests.
Both repros work in any directory on a filesystem with the encoding
feature, even if the directory doesn't actually have the casefold flag.
I couldn't reproduce a crash in f2fs_d_compare(), but it appears that a
similar crash is possible there.
Fix these bugs by reading ->d_parent and ->d_inode using READ_ONCE() and
falling back to the case sensitive behavior if the inode is NULL.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 2c2eb7a300 ("f2fs: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Do the name comparison for non-casefolded directories correctly.
This is analogous to ext4's commit 66883da1ee ("ext4: fix dcache
lookup of !casefolded directories").
Fixes: 2c2eb7a300 ("f2fs: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now overlayfs falls back to use default file splice read
and write, which is not compatiple with overlayfs, returning
EFAULT. xfstests generic/591 can reproduce part of this.
Tested this patch with xfstests auto group tests.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[BUG]
For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071,
looped runs can lead to random failure, where scrub finds csum error.
The possibility is not high, around 1/20 to 1/100, but it's causing data
corruption.
The bug is observable after commit b12de52896 ("btrfs: scrub: Don't
check free space before marking a block group RO")
[CAUSE]
Dev-replace has two source of writes:
- Write duplication
All writes to source device will also be duplicated to target device.
Content: Not yet persisted data/meta
- Scrub copy
Dev-replace reused scrub code to iterate through existing extents, and
copy the verified data to target device.
Content: Previously persisted data and metadata
The difference in contents makes the following race possible:
Regular Writer | Dev-replace
-----------------------------------------------------------------
^ |
| Preallocate one data extent |
| at bytenr X, len 1M |
v |
^ Commit transaction |
| Now extent [X, X+1M) is in |
v commit root |
================== Dev replace starts =========================
| ^
| | Scrub extent [X, X+1M)
| | Read [X, X+1M)
| | (The content are mostly garbage
| | since it's preallocated)
^ | v
| Write back happens for |
| extent [X, X+512K) |
| New data writes to both |
| source and target dev. |
v |
| ^
| | Scrub writes back extent [X, X+1M)
| | to target device.
| | This will over write the new data in
| | [X, X+512K)
| v
This race can only happen for nocow writes. Thus metadata and data cow
writes are safe, as COW will never overwrite extents of previous
transaction (in commit root).
This behavior can be confirmed by disabling all fallocate related calls
in fsstress (*), then all related tests can pass a 2000 run loop.
*: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \
-f collapse=0 -f punch=0 -f resvsp=0"
I didn't expect resvsp ioctl will fallback to fallocate in VFS...
[FIX]
Make dev-replace to require mandatory block group RO, and wait for current
nocow writes before calling scrub_chunk().
This patch will mostly revert commit 76a8efa171 ("btrfs: Continue replace
when set_block_ro failed") for dev-replace path.
The side effect is, dev-replace can be more strict on avaialble space, but
definitely worth to avoid data corruption.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 76a8efa171 ("btrfs: Continue replace when set_block_ro failed")
Fixes: b12de52896 ("btrfs: scrub: Don't check free space before marking a block group RO")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A performance regression was observed since linux v4.19 with aio test using
fio with iodepth 128 on overlayfs. The queue depth of the device was
always 1 which is unexpected.
After investigation, it was found that commit 16914e6fc7 ("ovl: add
ovl_read_iter()") and commit 2a92e07edc ("ovl: add ovl_write_iter()")
resulted in vfs_iter_{read,write} being called on underlying filesystem,
which always results in syncronous IO.
Implement async IO for stacked reading and writing. This resolves the
performance regresion.
This is implemented by allocating a new kiocb for submitting the AIO
request on the underlying filesystem. When the request is completed, the
new kiocb is freed and the completion callback is called on the original
iocb.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This doesn't cause any behavior changes and will be used by overlay async
IO implementation.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs, but if lower layer is on the
same fs and upper layer, it has no pseudo_dev assigned.
In this overlay layers setup:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the
st_dev;st_ino values of the real lower inode before copy up and the
st_dev;st_ino values of the real upper inode after copy up.
Fix this inconsitency by assigning a unique pseudo_dev also for upper fs,
that will be used as st_dev value along with the lower inode st_dev for
overlay inodes in the case above.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes ovl_lower_uuid_ok() to correctly detect the corner case:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case, bad_uuid would not have been set for B, because the check
only involved the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We check for conflicting (and null) uuid among all lower layers, including
those layers that are on the same fs as the upper layer.
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_fs[] array to fs[], extend its size by one and use index fsid
(instead of fsid-1) to access the fs[] array.
Initialize fs[0] with upper fs values. fsid 0 is reserved even with lower
only overlay, so fs[0] remains null in this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No code uses the sb returned from this helper, so make it retrun a boolean
and rename it to ovl_same_fs().
The xino mode is irrelevant when all layers are on same fs, so instead of
describing samefs with mode OVL_XINO_OFF, use a new xino_mode state, which
is 0 in the case of samefs, -1 in the case of xino=off and > 0 with xino
enabled.
Create a new helper ovl_same_dev(), to use instead of the common check for
(ovl_same_fs() || xinobits).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fs/xfs/xfs_inode.c: In function 'xfs_itruncate_extents_flags':
fs/xfs/xfs_inode.c:1523:8: warning: unused variable 'done' [-Wunused-variable]
commit 4bbb04abb4 ("xfs: truncate should remove
all blocks, not just to the end of the page cache")
left behind this, so remove it.
Fixes: 4bbb04abb4 ("xfs: truncate should remove all blocks, not just to the end of the page cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dan Carpenter pointed out that error is uninitialized. While there
never should be an attr leaf block with zero entries, let's not leave
that logic bomb there.
Fixes: 0bb9d159bd ("xfs: streamline xfs_attr3_leaf_inactive")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl4p1+MTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4YtCACPHyE8aoDTHZF8UZ9bHKNFVt4C1bRx
ihFB6/PzmIfFw4Cbf+yTW85q3zqJ/6eJIOZF4dlwoFWK+osSk8sYRaOvlEovysbR
sYiAbcOxePj9tSPdrWLYB/5ELtwMTloxBo7mPiJYt127UntWlPGfiz4sdHJBt1zI
IBPOIeACJKGe0+Wtj0mGsXk+WhEB3nFk2DINnLuFc4tG6yXkFNq5/fnXrgVTlUTF
4EwDQgHBUIqKDJarSyIBzud6VVshS7VaMAu8h9kwPScN4sG1y4ucgFzXIc4JfqRN
TnEV48hdRQMVuQtsvuzAMPQvsjMlIXUSTGZzs4XPbEBjgAP8+MP+PJvL
=XVg1
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.5-rc8' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a potential use-after-free from Jeff, marked for stable"
* tag 'ceph-for-5.5-rc8' of https://github.com/ceph/ceph-client:
ceph: hold extra reference to r_parent over life of request
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
arch_bprm_mm_init() is used at execve() time. The only non-stub
implementation is on x86 for MPX. Remove the hook entirely from
all architectures and generic code.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
In commit 9f79b78ef7 ("Convert filldir[64]() from __put_user() to
unsafe_put_user()") I changed filldir to not do individual __put_user()
accesses, but instead use unsafe_put_user() surrounded by the proper
user_access_begin/end() pair.
That make them enormously faster on modern x86, where the STAC/CLAC
games make individual user accesses fairly heavy-weight.
However, the user_access_begin() range was not really the exact right
one, since filldir() has the unfortunate problem that it needs to not
only fill out the new directory entry, it also needs to fix up the
previous one to contain the proper file offset.
It's unfortunate, but the "d_off" field in "struct dirent" is _not_ the
file offset of the directory entry itself - it's the offset of the next
one. So we end up backfilling the offset in the previous entry as we
walk along.
But since x86 didn't really care about the exact range, and used to be
the only architecture that did anything fancy in user_access_begin() to
begin with, the filldir[64]() changes did something lazy, and even
commented on it:
/*
* Note! This range-checks 'previous' (which may be NULL).
* The real range was checked in getdents
*/
if (!user_access_begin(dirent, sizeof(*dirent)))
goto efault;
and it all worked fine.
But now 32-bit ppc is starting to also implement user_access_begin(),
and the fact that we faked the range to only be the (possibly not even
valid) previous directory entry becomes a problem, because ppc32 will
actually be using the range that is passed in for more than just "check
that it's user space".
This is a complete rewrite of Christophe's original patch.
By saving off the record length of the previous entry instead of a
pointer to it in the filldir data structures, we can simplify the range
check and the writing of the previous entry d_off field. No need for
any conditionals in the user accesses themselves, although we retain the
conditional EINTR checking for the "was this the first directory entry"
signal handling latency logic.
Fixes: 9f79b78ef7 ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Link: https://lore.kernel.org/lkml/a02d3426f93f7eb04960a4d9140902d278cab0bb.1579697910.git.christophe.leroy@c-s.fr/
Link: https://lore.kernel.org/lkml/408c90c4068b00ea8f1c41cca45b84ec23d4946b.1579783936.git.christophe.leroy@c-s.fr/
Reported-and-tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 8a23eb804c ("Make filldir[64]() verify the directory entry
filename is valid") added some minimal validity checks on the directory
entries passed to filldir[64](). But they really were pretty minimal.
This fleshes out at least the name length check: we used to disallow
zero-length names, but really, negative lengths or oevr-long names
aren't ok either. Both could happen if there is some filesystem
corruption going on.
Now, most filesystems tend to use just an "unsigned char" or similar for
the length of a directory entry name, so even with a corrupt filesystem
you should never see anything odd like that. But since we then use the
name length to create the directory entry record length, let's make sure
it actually is half-way sensible.
Note how POSIX states that the size of a path component is limited by
NAME_MAX, but we actually use PATH_MAX for the check here. That's
because while NAME_MAX is generally the correct maximum name length
(it's 255, for the same old "name length is usually just a byte on
disk"), there's nothing in the VFS layer that really cares.
So the real limitation at a VFS layer is the total pathname length you
can pass as a filename: PATH_MAX.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since btrfs was migrated to use the generic VFS helpers for clone and
deduplication, it stopped allowing for the last block of a file to be
deduplicated when the source file size is not sector size aligned (when
eof is somewhere in the middle of the last block). There are two reasons
for that:
1) The generic code always rounds down, to a multiple of the block size,
the range's length for deduplications. This means we end up never
deduplicating the last block when the eof is not block size aligned,
even for the safe case where the destination range's end offset matches
the destination file's size. That rounding down operation is done at
generic_remap_check_len();
2) Because of that, the btrfs specific code does not expect anymore any
non-aligned range length's for deduplication and therefore does not
work if such nona-aligned length is given.
This patch addresses that second part, and it depends on a patch that
fixes generic_remap_check_len(), in the VFS, which was submitted ealier
and has the following subject:
"fs: allow deduplication of eof block into the end of the destination file"
These two patches address reports from users that started seeing lower
deduplication rates due to the last block never being deduplicated when
the file size is not aligned to the filesystem's block size.
Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We always round down, to a multiple of the filesystem's block size, the
length to deduplicate at generic_remap_check_len(). However this is only
needed if an attempt to deduplicate the last block into the middle of the
destination file is requested, since that leads into a corruption if the
length of the source file is not block size aligned. When an attempt to
deduplicate the last block into the end of the destination file is
requested, we should allow it because it is safe to do it - there's no
stale data exposure and we are prepared to compare the data ranges for
a length not aligned to the block (or page) size - in fact we even do
the data compare before adjusting the deduplication length.
After btrfs was updated to use the generic helpers from VFS (by commit
34a28e3d77 ("Btrfs: use generic_remap_file_range_prep() for cloning
and deduplication")) we started to have user reports of deduplication
not reflinking the last block anymore, and whence users getting lower
deduplication scores. The main use case is deduplication of entire
files that have a size not aligned to the block size of the filesystem.
We already allow cloning the last block to the end (and beyond) of the
destination file, so allow for deduplication as well.
Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Sometimes when running generic/475 we would trip the
WARN_ON(cache->reserved) check when free'ing the block groups on umount.
This is because sometimes we don't commit the transaction because of IO
errors and thus do not cleanup the tree logs until at umount time.
These blocks are still reserved until they are cleaned up, but they
aren't cleaned up until _after_ we do the free block groups work. Fix
this by moving the free after free'ing the fs roots, that way all of the
tree logs are cleaned up and we have a properly cleaned fs. A bunch of
loops of generic/475 confirmed this fixes the problem.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code doesn't correctly handle the situation which arises when
a file system that has METADATA_UUID_INCOMPAT flag set and has its FSID
changed to the one in metadata uuid. This causes the incompat flag to
disappear.
In case of a power failure we could end up in a situation where part of
the disks in a multi-disk filesystem are correctly reverted to
METADATA_UUID_INCOMPAT flag unset state, while others have
METADATA_UUID_INCOMPAT set and CHANGING_FSID_V2_IN_PROGRESS.
This patch corrects the behavior required to handle the case where a
disk of the second type is scanned first, creating the necessary
btrfs_fs_devices. Subsequently, when a disk which has already completed
the transition is scanned it should overwrite the data in
btrfs_fs_devices.
Reported-by: Su Yue <Damenly_Su@gmx.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is one more cases which isn't handled by the original metadata
uuid work. Namely, when a filesystem has METADATA_UUID incompat bit and
the user decides to change the FSID to the original one e.g. have
metadata_uuid and fsid match. In case of power failure while this
operation is in progress we could end up in a situation where some of
the disks have the incompat bit removed and the other half have both
METADATA_UUID_INCOMPAT and FSID_CHANGING_IN_PROGRESS flags.
This patch handles the case where a disk that has successfully changed
its FSID such that it equals METADATA_UUID is scanned first.
Subsequently when a disk with both
METADATA_UUID_INCOMPAT/FSID_CHANGING_IN_PROGRESS flags is scanned
find_fsid_changed won't be able to find an appropriate btrfs_fs_devices.
This is done by extending find_fsid_changed to correctly find
btrfs_fs_devices whose metadata_uuid/fsid are the same and they match
the metadata_uuid of the currently scanned device.
Fixes: cc5de4e702 ("btrfs: Handle final split-brain possibility during fsid change")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reported-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_fsid became rather hairy with the introduction of metadata uuid
changing feature. Alleviate this by factoring out the metadata uuid
specific code in a dedicated function which deals with finding
correct fsid for a device with changed uuid.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since find_fsid_inprogress should also handle the case in which an fs
didn't change its FSID make it call find_fsid directly. This makes the
code in device_list_add simpler by eliminating a conditional call of
find_fsid. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recently fsstress (from fstests) sporadically started to trigger an
infinite loop during fsync operations. This turned out to be because
support for the rename exchange and whiteout operations was added to
fsstress in fstests. These operations, unlike any others in fsstress,
cause file names to be reused, whence triggering this issue. However
it's not necessary to use rename exchange and rename whiteout operations
trigger this issue, simple rename operations and file creations are
enough to trigger the issue.
The issue boils down to when we are logging inodes that conflict (that
had the name of any inode we need to log during the fsync operation), we
keep logging them even if they were already logged before, and after
that we check if there's any other inode that conflicts with them and
then add it again to the list of inodes to log. Skipping already logged
inodes fixes the issue.
Consider the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir # inode 257
$ touch /mnt/testdir/zz # inode 258
$ ln /mnt/testdir/zz /mnt/testdir/zz_link
$ touch /mnt/testdir/a # inode 259
$ sync
# The following 3 renames achieve the same result as a rename exchange
# operation (<rename_exchange> /mnt/testdir/zz_link to /mnt/testdir/a).
$ mv /mnt/testdir/a /mnt/testdir/a/tmp
$ mv /mnt/testdir/zz_link /mnt/testdir/a
$ mv /mnt/testdir/a/tmp /mnt/testdir/zz_link
# The following rename and file creation give the same result as a
# rename whiteout operation (<rename_whiteout> zz to a2).
$ mv /mnt/testdir/zz /mnt/testdir/a2
$ touch /mnt/testdir/zz # inode 260
$ xfs_io -c fsync /mnt/testdir/zz
--> results in the infinite loop
The following steps happen:
1) When logging inode 260, we find that its reference named "zz" was
used by inode 258 in the previous transaction (through the commit
root), so inode 258 is added to the list of conflicting indoes that
need to be logged;
2) After logging inode 258, we find that its reference named "a" was
used by inode 259 in the previous transaction, and therefore we add
inode 259 to the list of conflicting inodes to be logged;
3) After logging inode 259, we find that its reference named "zz_link"
was used by inode 258 in the previous transaction - we add inode 258
to the list of conflicting inodes to log, again - we had already
logged it before at step 3. After logging it again, we find again
that inode 259 conflicts with him, and we add again 259 to the list,
etc - we end up repeating all the previous steps.
So fix this by skipping logging of conflicting inodes that were already
logged.
Fixes: 6b5fc433a7 ("Btrfs: fix fsync after succession of renames of different files")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we abort a transaction we have the following sequence
if (!trans->dirty && list_empty(&trans->new_bgs))
return;
WRITE_ONCE(trans->transaction->aborted, err);
The idea being if we didn't modify anything with our trans handle then
we don't really need to abort the whole transaction, maybe the other
trans handles are fine and we can carry on.
However in the case of create_snapshot we add a pending_snapshot object
to our transaction and then commit the transaction. We don't actually
modify anything. sync() behaves the same way, attach to an existing
transaction and commit it. This means that if we have an IO error in
the right places we could abort the committing transaction with our
trans->dirty being not set and thus not set transaction->aborted.
This is a problem because in the create_snapshot() case we depend on
pending->error being set to something, or btrfs_commit_transaction
returning an error.
If we are not the trans handle that gets to commit the transaction, and
we're waiting on the commit to happen we get our return value from
cur_trans->aborted. If this was not set to anything because sync() hit
an error in the transaction commit before it could modify anything then
cur_trans->aborted would be 0. Thus we'd return 0 from
btrfs_commit_transaction() in create_snapshot.
This is a problem because we then try to do things with
pending_snapshot->snap, which will be NULL because we didn't create the
snapshot, and then we'll get a NULL pointer dereference like the
following
"BUG: kernel NULL pointer dereference, address: 00000000000001f0"
RIP: 0010:btrfs_orphan_cleanup+0x2d/0x330
Call Trace:
? btrfs_mksubvol.isra.31+0x3f2/0x510
btrfs_mksubvol.isra.31+0x4bc/0x510
? __sb_start_write+0xfa/0x200
? mnt_want_write_file+0x24/0x50
btrfs_ioctl_snap_create_transid+0x16c/0x1a0
btrfs_ioctl_snap_create_v2+0x11e/0x1a0
btrfs_ioctl+0x1534/0x2c10
? free_debug_processing+0x262/0x2a3
do_vfs_ioctl+0xa6/0x6b0
? do_sys_open+0x188/0x220
? syscall_trace_enter+0x1f8/0x330
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4a/0x1b0
In order to fix this we need to make sure anybody who calls
commit_transaction has trans->dirty set so that they properly set the
trans->transaction->aborted value properly so any waiters know bad
things happened.
This was found while I was running generic/475 with my modified
fsstress, it reproduced within a few runs. I ran with this patch all
night and didn't see the problem again.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fsync on a subvolume and create a log root for that volume, and
then later delete that subvolume we'll never clean up its log root. Fix
this by making switch_commit_roots free the log for any dropped roots we
encounter. The extra churn is because we need a btrfs_trans_handle, not
the btrfs_transaction.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
New sysfs attributes that track the filesystem status of devices, stored
in the per-filesystem directory in /sys/fs/btrfs/FSID/devinfo . There's
a directory for each device, with name corresponding to the numerical
device id.
in_fs_metadata - device is in the list of fs metadata
missing - device is missing (no device node or block device)
replace_target - device is target of replace
writeable - writes from fs are allowed
These attributes reflect the state of the device::dev_state and created
at mount time.
Sample output:
$ pwd
/sys/fs/btrfs/6e1961f1-5918-4ecc-a22f-948897b409f7/devinfo/1/
$ ls
in_fs_metadata missing replace_target writeable
$ cat missing
0
The output from these attributes are 0 or 1. 0 indicates unset and 1
indicates set. These attributes are readonly.
It is observed that the device delete thread and sysfs read thread will
not race because the delete thread calls sysfs kobject_put() which in
turn waits for existing sysfs read to complete.
Note for device replace devid swap:
During the replace the target device temporarily assumes devid 0 before
assigning the devid of the soruce device.
In btrfs_dev_replace_finishing() we remove source sysfs devid using the
function btrfs_sysfs_remove_devices_attr(), so after that call
kobject_rename() to update the devid in the sysfs. This adds and calls
btrfs_sysfs_update_devid() helper function to update the device id.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Move variables to appropriate scope. Remove last BUG_ON in the function
and rework error handling accordingly. Make the duplicate detection code
more straightforward. Use in_range macro. And give variables more
descriptive name by explicitly distinguishing between IO stripe size
(size recorded in the chunk item) and data stripe size (the size of
an actual stripe, constituting a logical chunk/block group).
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add RAID1 and single testcases to verify that data stripes are excluded
from super block locations and that the address mapping is valid.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add basic infrastructure to create and link dummy btrfs_devices. This
will be used in the pending btrfs_rmap_block test which deals with
the block groups.
Calling btrfs_alloc_dummy_device will link the newly created device to
the passed fs_info and the test framework will free them once the test
is finished.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's used only during initial block group reading to map physical
address of super block to a list of logical ones. Make it private to
block-group.c, add proper kernel doc and ensure it's exported only for
tests.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a report where objtool detects unreachable instructions, eg.:
fs/btrfs/ctree.o: warning: objtool: btrfs_search_slot()+0x2d4: unreachable instruction
This seems to be a false positive due to compiler version. The cause is
in the ASSERT macro implementation that does the conditional check as
IS_DEFINED(CONFIG_BTRFS_ASSERT) and not an #ifdef.
To avoid that, use the ifdefs directly.
There are still 2 reports that aren't fixed:
fs/btrfs/extent_io.o: warning: objtool: __set_extent_bit()+0x71f: unreachable instruction
fs/btrfs/relocation.o: warning: objtool: find_data_references()+0x4e0: unreachable instruction
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Sterba <dsterba@suse.com>
When an encrypted directory is listed without the key, the filesystem
must show "no-key names" that uniquely identify directory entries, are
at most 255 (NAME_MAX) bytes long, and don't contain '/' or '\0'.
Currently, for short names the no-key name is the base64 encoding of the
ciphertext filename, while for long names it's the base64 encoding of
the ciphertext filename's dirhash and second-to-last 16-byte block.
This format has the following problems:
- Since it doesn't always include the dirhash, it's incompatible with
directories that will use a secret-keyed dirhash over the plaintext
filenames. In this case, the dirhash won't be computable from the
ciphertext name without the key, so it instead must be retrieved from
the directory entry and always included in the no-key name.
Casefolded encrypted directories will use this type of dirhash.
- It's ambiguous: it's possible to craft two filenames that map to the
same no-key name, since the method used to abbreviate long filenames
doesn't use a proper cryptographic hash function.
Solve both these problems by switching to a new no-key name format that
is the base64 encoding of a variable-length structure that contains the
dirhash, up to 149 bytes of the ciphertext filename, and (if any bytes
remain) the SHA-256 of the remaining bytes of the ciphertext filename.
This ensures that each no-key name contains everything needed to find
the directory entry again, contains only legal characters, doesn't
exceed NAME_MAX, is unambiguous unless there's a SHA-256 collision, and
that we only take the performance hit of SHA-256 on very long filenames.
Note: this change does *not* address the existing issue where users can
modify the 'dirhash' part of a no-key name and the filesystem may still
accept the name.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved comments and commit message, fixed checking return value
of base64_decode(), check for SHA-256 error, continue to set disk_name
for short names to keep matching simpler, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
In order to support a new dirhash method that is a secret-keyed hash
over the plaintext filenames (which will be used by encrypted+casefolded
directories on ext4 and f2fs), fscrypt will be switching to a new no-key
name format that always encodes the dirhash in the name.
UBIFS isn't happy with this because it has assertions that verify that
either the hash or the disk name is provided, not both.
Change it to use the disk name if one is provided, even if a hash is
available too; else use the hash.
Link: https://lore.kernel.org/r/20200120223201.241390-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
If userspace provides an invalid fscrypt no-key filename which encodes a
hash value with any of the UBIFS node type bits set (i.e. the high 3
bits), gracefully report ENOENT rather than triggering ubifs_assert().
Test case with kvm-xfstests shell:
. fs/ubifs/config
. ~/xfstests/common/encrypt
dev=$(__blkdev_to_ubi_volume /dev/vdc)
ubiupdatevol $dev -t
mount $dev /mnt -t ubifs
mkdir /mnt/edir
xfs_io -c set_encpolicy /mnt/edir
rm /mnt/edir/_,,,,,DAAAAAAAAAAAAAAAAAAAAAAAAAA
With the bug, the following assertion fails on the 'rm' command:
[ 19.066048] UBIFS error (ubi0:0 pid 379): ubifs_assert_failed: UBIFS assert failed: !(hash & ~UBIFS_S_KEY_HASH_MASK), in fs/ubifs/key.h:170
Fixes: f4f61d2cc6 ("ubifs: Implement encrypted filenames")
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://lore.kernel.org/r/20200120223201.241390-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that there's sometimes a second type of per-file key (the dirhash
key), clarify some function names, macros, and documentation that
specifically deal with per-file *encryption* keys.
Link: https://lore.kernel.org/r/20200120223201.241390-4-ebiggers@kernel.org
Reviewed-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
When we allow indexed directories to use both encryption and
casefolding, for the dirhash we can't just hash the ciphertext filenames
that are stored on-disk (as is done currently) because the dirhash must
be case insensitive, but the stored names are case-preserving. Nor can
we hash the plaintext names with an unkeyed hash (or a hash keyed with a
value stored on-disk like ext4's s_hash_seed), since that would leak
information about the names that encryption is meant to protect.
Instead, if we can accept a dirhash that's only computable when the
fscrypt key is available, we can hash the plaintext names with a keyed
hash using a secret key derived from the directory's fscrypt master key.
We'll use SipHash-2-4 for this purpose.
Prepare for this by deriving a SipHash key for each casefolded encrypted
directory. Make sure to handle deriving the key not only when setting
up the directory's fscrypt_info, but also in the case where the casefold
flag is enabled after the fscrypt_info was already set up. (We could
just always derive the key regardless of casefolding, but that would
introduce unnecessary overhead for people not using casefolding.)
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, squashed with change
that avoids unnecessarily deriving the key, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Casefolded encrypted directories will use a new dirhash method that
requires a secret key. If the directory uses a v2 encryption policy,
it's easy to derive this key from the master key using HKDF. However,
v1 encryption policies don't provide a way to derive additional keys.
Therefore, don't allow casefolding on directories that use a v1 policy.
Specifically, make it so that trying to enable casefolding on a
directory that has a v1 policy fails, trying to set a v1 policy on a
casefolded directory fails, and trying to open a casefolded directory
that has a v1 policy (if one somehow exists on-disk) fails.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, and other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fname_encrypt() is a global function, due to being used in both fname.c
and hooks.c. So it should be prefixed with "fscrypt_", like all the
other global functions in fs/crypto/.
Link: https://lore.kernel.org/r/20200120071736.45915-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When an encryption key can't be fully removed due to file(s) protected
by it still being in-use, we shouldn't really print the path to one of
these files to the kernel log, since parts of this path are likely to be
encrypted on-disk, and (depending on how the system is set up) the
confidentiality of this path might be lost by printing it to the log.
This is a trade-off: a single file path often doesn't matter at all,
especially if it's a directory; the kernel log might still be protected
in some way; and I had originally hoped that any "inode(s) still busy"
bugs (which are security weaknesses in their own right) would be quickly
fixed and that to do so it would be super helpful to always know the
file path and not have to run 'find dir -inum $inum' after the fact.
But in practice, these bugs can be hard to fix (e.g. due to asynchronous
process killing that is difficult to eliminate, for performance
reasons), and also not tied to specific files, so knowing a file path
doesn't necessarily help.
So to be safe, for now let's just show the inode number, not the path.
If someone really wants to know a path they can use 'find -inum'.
Fixes: b1c0ec3599 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200120060732.390362-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When doing an unstable write, we need to ensure that we sample the
write verifier before releasing the lock, and allowing a commit to
the same file to proceed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we have a successful commit, ensure we sample the commit verifier
before releasing the lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that we can distinguish between synchronous CLONE and
WRITE errors, and that we can assign them correctly.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Needed in order to fix exclusion w.r.t. writes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't know if the error returned by the fsync() call is
exclusive to the data written by the stable write, so play it
safe.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Strictly speaking, a stable write error needs to reflect the
write + the commit of that write (and only that write). To
ensure that we don't pick up the write errors from other
writebacks, add a rw_semaphore to provide exclusion.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Needed in order to fix stable writes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd_file_mark_find_or_create() keeps winning the race for the
nfsd_file_fsnotify_group->mark_mutex against nfsd_file_mark_put()
then it can soft lock up, since fsnotify_add_inode_mark() ends
up always finding an existing entry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't call nfsd_file_gc() on every put of the reference in nfsd_file_put().
Instead, do it only when we're expecting the refcount to go to 1.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Emsure we schedule the laundrette even if the struct file is carrying
file errors.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that if the filecache laundrette gets stuck, it only affects
the knfsd instances of one container.
The notifier callbacks can be called from various contexts so avoid
using synchonous filesystem operations that might deadlock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the lookup keeps finding a nfsd_file with an unhashed open file,
then retry once only.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Fixes: 65294c1f2c "nfsd: add a new struct file caching facility to nfsd"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
REQ_F_FORCE_ASYNC is checked only for the head of a link. Fix it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whenever IOSQE_ASYNC is set, requests will be punted to async without
getting into io_issue_req() and without proper preparation done (e.g.
io_req_defer_prep()). Hence they will be left uninitialised.
Prepare them before punting.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename lower_layers[] array to layers[], extend its size by one and
initialize layers[0] with upper layer values. Lower layers are now
addressed with index 1..numlower. layers[0] is reserved even with lower
only overlay.
[SzM: replace ofs->numlower with ofs->numlayer, the latter's value is
incremented by one]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Current copy-up is not efficient for big sparse file,
It's not only slow but also wasting more disk space
when the target lower file has huge hole inside.
This patch tries to recognize file hole and skip it
during copy-up.
Detail logic of hole detection as below:
When we detect next data position is larger than current
position we will skip that hole, otherwise we copy
data in the size of OVL_COPY_UP_CHUNK_SIZE. Actually,
it may not recognize all kind of holes and sometimes
only skips partial of hole area. However, it will be
enough for most of the use cases.
Additionally, this optimization relies on lseek(2)
SEEK_DATA implementation, so for some specific
filesystems which do not support this feature
will behave as before on copy-up.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In ovl_llseek() we use the overlay inode rwsem to protect against
concurrent modifications to real file f_pos, because we copy the overlay
file f_pos to/from the real file f_pos.
This caused a lockdep warning of locking order violation when the
ovl_llseek() operation was called on a lower nested overlay layer while the
upper layer fs sb_writers is held (with patch improving copy-up efficiency
for big sparse file).
Use the internal ovl_inode_lock() instead of the overlay inode rwsem in
those cases. It is meant to be used for protecting against concurrent
changes to overlay inode internal state changes.
The locking order rules are documented to explain this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The WARN_ON() that child entry is always on overlay st_dev became wrong
when we allowed this function to update d_ino in non-samefs setup with xino
enabled.
It is not true in case of xino bits overflow on a non-dir inode. Leave the
WARN_ON() only for directories, where assertion is still true.
Fixes: adbf4f7ea8 ("ovl: consistent d_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----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=oNaB
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.5-2020-01-22' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"This was supposed to have gone in last week, but due to a brain fart
on my part, I forgot that we made this struct addition in the 5.5
cycle. So here it is for 5.5, to prevent having a 32 vs 64-bit
compatability issue with the files_update command"
* tag 'io_uring-5.5-2020-01-22' of git://git.kernel.dk/linux-block:
io_uring: fix compat for IORING_REGISTER_FILES_UPDATE
Currently, we just assume that it will stick around by virtue of the
submitter's reference, but later patches will allow the syscall to
return early and we can't rely on that reference at that point.
While I'm not aware of any reports of it, Xiubo pointed out that this
may fix a use-after-free. If the wait for a reply times out or is
canceled via signal, and then the reply comes in after the syscall
returns, the client can end up trying to access r_parent without a
reference.
Take an extra reference to the inode when setting r_parent and release
it when releasing the request.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
these macros are never used from introduced. better to
remove them.
Link: https://lore.kernel.org/r/1579602338-57079-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Bharath Vedartham <linux.bhar@gmail.com>
Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: reiserfs-devel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Since commit 223b2b889f ("GFS2: Fix alignment issue and tidy
gfs2_bitfit"), these 3 macros aren't used anymore, so remove them.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since commit 1579343a73 ("GFS2: Remove dirent_first() function"),
these macros aren't used any more, so remove them.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
No need to introduce such separated helper since
cache strategy compile configs were changed into
runtime options instead in v5.4. No logic changes.
Link: https://lore.kernel.org/r/20200121064747.138987-1-gaoxiang25@huawei.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Avoid using the inode number as the indirect disc address, even though
these currently have the same value.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add support for ADFS E and E+ floppy image formats, which, unlike their
hard disk variants, do not have a filesystem boot block - they have a
single map zone, with the map fragment stored at sector 0.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Separate the filesystem block probing from the superblock filling so
we can support other ADFS filesystem formats, such as the single-zone
E and E+ floppy image formats which do not have a boot block.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we have write support enabled, we must not drop inodes before they
have been written back, otherwise we lose updates to the filesystem on
umount. Keep the inodes around unless we are built in read-only mode,
or we are mounted read-only.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement big directory entry update support in the same way that we
do for new directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When reading a big directory, calculate the validate the directory
checkbyte to ensure that the directory contents are valid.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Strengthen the directory validation by ensuring that the header fields
contain sensible values that fit inside the directory, and limit the
directory size to 4MB as per RISC OS requirements.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Extract the directory validation from the directory reading function as
we will want to re-use this code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Factor out the directory entry byte offset calculation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
After changing a directory, we need to update the sequence numbers and
calculate the new check byte before the directory is scheduled to be
written back to the media. Since this needs to happen for any change
to the directory, move this into a separate method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__adfs_dir_put() and adfs_dir_find_entry() are only called from
adfs_f_update(), so move them into this function, removing some
unnecessary entry copying by doing so.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
adfs_dir_read() is only called from adfs_f_read(), so merge it into
that function. As new directories are always 2048 bytes in size,
(which we rely on elsewhere) we can consolidate some of the code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Check that the lastmask and reserved fields are all zero, as per the
documentation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We have two locations where we validate the new directory format, so
factor this out to a helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add and use pointers in the adfs_dir structure to access the directory
head and tail structures, which will always be contiguous in a buffer.
This allows us to avoid memcpy()ing the data in the new directory code,
making it slightly more efficient.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rather than using setpos + getnext to iterate through the directory
entries, pass iterate() down to the dir format code to populate the
dirents.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is nothing in our readdir (aka iterate) method that relies on
the directory inode being exclusively locked, so switch to using the
iterate_shared() hook rather than iterate().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Get rid of the ifdef, using IS_ENABLED() instead to detect whether the
code should be callable. This allows the compiler to always parse the
following code, reducing the chances of errors being missed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we update a directory, a number of errors may happen. If we failed
to find the entry to update, we can just release the directory buffers
as normal.
However, if we have some other error, we may have partially updated the
buffers, resulting in an invalid directory. In this case, we need to
discard the buffers to avoid writing the contents back to the media, and
later re-read the directory from the media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use __u8 and pack the structures for on-disk directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Update directory locking such that it covers the validation of the
directory, which could fail if another thread is concurrently writing
to the same directory. Since we may sleep, we need to use a rwsem
rather than a rw spinlock.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Provide a helper for marking directory buffers dirty so they get
written back to disk.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a helper to read a directory using the inode, which we do in two
places.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Both directory formats code the mechanics of fetching the directory
buffers using their own implementations. Consolidate these into one
implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Directories can span multiple buffers, and we currently open-code
memcpy access to these buffers, including dealing with entries that
are split across multiple buffers. Such code exists in both
directory format implementations.
Provide common functions to allow data to be copied from/to the
directory buffers as if they were a contiguous set of buffers, and
use them when accessing directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
adfs_fplus_sync() can be used for both directory formats since we now
have a common way to access the buffer heads, so move it into dir.c
and appropriately rename it. Remove the directory-format specific
implementations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the bhs pointer in place, we have no need for separate per-format
free() methods, since a generic version will do. Provide a generic
implementation, remove the format specific implementations and the
method function pointer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Initialise the dir object before we pass it down to the directory format
specific read handler. This allows us to get rid of the initialisation
inside those handlers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename bh_fplus to bhs in preparation to make some of the directory
handling code sharable between implementations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When scanning the map for a fragment id, we need to keep track of the
free space links, so we don't inadvertently believe that the freespace
link is a valid fragment id.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move map specific superblock initialisation to map.c, rather than
having it spread into super.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use find_next_bit_le() to find the end of a fragment in the map rather
than open-coding this functionality.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
lookup_zone() and scan_free_map() cope in different ways with the
location of the map data within a zone:
1. lookup_zone() adds a four byte offset to the map data pointer to
skip over the check and free link bytes.
2. scan_free_map() needs to use the free link pointer, which is an
offset from itself, so we end up adding a 32-bit offset to the
end pointer (aka mapsize) which is really confusing.
Rename mapsize to endbit as this is really what it is, and incorporate
the 32-bit offset into the map layout. This means that both dm_startbit
and dm_endbit are now bit offsets from the start of the buffer, rather
than four bytes in to the buffer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We have several places which deal with releasing the map buffers and
freeing the map array. Provide a helper for this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split up adfs_read_map() into separate helpers to layout the map,
read the map, and release the map buffers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
adfs_map_free() is not obvious whether it is freeing the map or
returning the number of free blocks on the filesystem. Rename it to
the more generic statfs() to make it clear that it's a statistic
function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Keep all the map code together in map.c, rather than having some in
super.c
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix adfs_mode2atts() to actually update the file permissions on the
media rather than using the current inode mode. Note also that
directories do not have read/write permissions stored on the media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Despite ADFS timestamps having centi-second granularity, and Linux
gaining fine-grained timestamp support in v2.5.48, fs/adfs was never
updated.
Update fs/adfs to centi-second support, and ensure that the inode ctime
always reflects what is written in underlying media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't rely on implicit ordering of IORING_OP_ and explicitly place them
at a right place in io_op_defs. Now former comments are now a part of
the code and won't ever outdate.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For each IOSQE_* flag there is a corresponding REQ_F_* flag. And there
is a repetitive pattern of their translation:
e.g. if (sqe->flags & SQE_FLAG*) req->flags |= REQ_F_FLAG*
Use same numeric values/bits for them and copy instead of manual
handling.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A request can get into the defer list only once, there is no need for
marking it as drained, so remove it. This probably was left after
extracting __need_defer() for use in timeouts.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently flush early, but if we have something in progress and a
new switch is scheduled, we need to ensure to flush after our teardown
as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->ring_fd and req->ring_file are used only during the prep stage
during submission, which is is protected by mutex. There is no need
to store them per-request, place them in ctx.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_commit_cqring() is almost always called when there is a change in
the rings, so the check is rather pessimising.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move setting ctx->drain_next to the only place it could be set, when it
got linked non-head requests. The same for checking it, it's interesting
only for a head of a link or a non-linked request.
No functional changes here. This removes some code from the common path
and also removes REQ_F_DRAIN_LINK flag, as it doesn't need it anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The application currently has no way of knowing if a given opcode is
supported or not without having to try and issue one and see if we get
-EINVAL or not. And even this approach is fraught with peril, as maybe
we're getting -EINVAL due to some fields being missing, or maybe it's
just not that easy to issue that particular command without doing some
other leg work in terms of setup first.
This adds IORING_REGISTER_PROBE, which fills in a structure with info
on what it supported or not. This will work even with sparse opcode
fields, which may happen in the future or even today if someone
backports specific features to older kernels.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't assume that the whole batch has fixed files in it. If it's a
mix, or none at all, then we can end up doing a ref put that either
messes up accounting, or causes an oops if we have no fixed files at
all.
Also ensure we free requests properly between inflight accounted and
normal requests.
Fixes: 82c721577011 ("io_uring: extend batch freeing to cover more cases")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For some test apps at least, user_data is just zeroes. So it's not a
good way to tell what the command actually is. Add the opcode to the
issue trace point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for the new openat2(2) system call. It's trivial to do, as
we can have openat(2) just be wrapped around it.
Suggested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only use it internally in the prep functions for both statx and
openat, so we don't need it to be persistent across the request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an application is using eventfd notifications with poll to know when
new SQEs can be issued, it's expecting the following read/writes to
complete inline. And with that, it knows that there are events available,
and don't want spurious wakeups on the eventfd for those requests.
This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like
IORING_REGISTER_EVENTFD, except it only triggers notifications for events
that happen from async completions (IRQ, or io-wq worker completions).
Any completions inline from the submission itself will not trigger
notifications.
Suggested-by: Mark Papadakis <markuspapadakis@icloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding another one, which would make us spill into
another long (and hence bump the size of the ctx), change them to
bit fields.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an application attempts to register a set with unbounded requests
pending, we can be stuck here forever if they don't complete. We can
make this wait interruptible, and just abort if we get signaled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Null check kfree is redundant, so remove it.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_wq workers use io_issue_sqe() to forward sqes and never
io_queue_sqe(). Remove extra check for io_wq_current_is_worker()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It should be pretty rare to not submitting anything when there is
something in the ring. No need to keep heuristics for this case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A user may ask to submit more than there is in the ring, and then
io_uring will submit as much as it can. However, in the last iteration
it will allocate an io_kiocb and immediately free it. It could do
better and adjust @to_submit to what is in the ring.
And since the ring's head is already checked here, there is no need to
do it in the loop, spamming with smp_load_acquire()'s barriers
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_submit_sqes() to clamp @to_submit itself. It removes duplicated
code and prepares for following changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some applications like to start small in terms of ring size, and then
ramp up as needed. This is a bit tricky to do currently, since we don't
advertise the max ring size.
This adds IORING_SETUP_CLAMP. If set, and the values for SQ or CQ ring
size exceed what we support, then clamp them at the max values instead
of returning -EINVAL. Since we return the chosen ring sizes after setup,
no further changes are needed on the application side. io_uring already
changes the ring sizes if the application doesn't ask for power-of-two
sizes, for example.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we only batch free if fixed files are used, no links, no aux
data, etc. This extends the batch freeing to only exclude the linked
case and fallback case, and make io_free_req_many() handle the other
cases just fine.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
percpu_ref_tryget() has its own overhead. Instead getting a reference
for each request, grab a bunch once per io_submit_sqes().
~5% throughput boost for a "submit and wait 128 nops" benchmark.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
__io_req_free_empty() -> __io_req_do_free()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for doing madvise(2) through io_uring. We assume that
any operation can block, and hence punt everything async. This could be
improved, but hard to make bullet proof. The async punt ensures it's
safe.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for doing fadvise through io_uring. We assume that
WILLNEED doesn't block, but that DONTNEED may block.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This behaves like preadv2/pwritev2 with offset == -1, it'll use (and
update) the current file position. This obviously comes with the caveat
that if the application has multiple read/writes in flight, then the
end result will not be as expected. This is similar to threads sharing
a file descriptor and doing IO using the current file position.
Since this feature isn't easily detectable by doing a read or write,
add a feature flags, IORING_FEAT_RW_CUR_POS, to allow applications to
detect presence of this feature.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For uses cases that don't already naturally have an iovec, it's easier
(or more convenient) to just use a buffer address + length. This is
particular true if the use case is from languages that want to create
a memory safe abstraction on top of io_uring, and where introducing
the need for the iovec may impose an ownership issue. For those cases,
they currently need an indirection buffer, which means allocating data
just for this purpose.
Add basic read/write that don't require the iovec.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For busy IORING_OP_POLL_ADD workloads, we can have enough contention
on the completion lock that we fail the inline completion path quite
often as we fail the trylock on that lock. Add a list for deferred
completions that we can use in that case. This helps reduce the number
of async offloads we have to do, as if we get multiple completions in
a row, we'll piggy back on to the poll_llist instead of having to queue
our own offload.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently check ->cq_overflow_list from both SQ and CQ context, which
causes some bouncing of that cache line. Add separate bits of state for
this instead, so that the SQ side can check using its own state, and
likewise for the CQ side.
This adds ->sq_check_overflow with the SQ state, and ->cq_check_overflow
with the CQ state. If we hit an overflow condition, both of these bits
are set. Likewise for overflow flush clear, we clear both bits. For the
fast path of just checking if there's an overflow condition on either
the SQ or CQ side, we can use our own private bit for this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently have various switch statements that check if an opcode needs
a file, mm, etc. These are hard to keep in sync as opcodes are added. Add
a struct io_op_def that holds all of this information, so we have just
one spot to update when opcodes are added.
This also enables us to NOT allocate req->io if a deferred command
doesn't need it, and corrects some mistakes we had in terms of what
commands need mm context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_free_req() and io_double_put_req() aren't used before they are
defined, so we can kill these two forwards.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move io_queue_link_head() to links handling code in io_submit_sqe(),
so it wouldn't need extra checks and would have better data locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling "prev" a head of a link is a bit misleading. Rename it
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring defaults to always doing inline submissions, if at all
possible. But for larger copies, even if the data is fully cached, that
can take a long time. Add an IOSQE_ASYNC flag that the application can
set on the SQE - if set, it'll ensure that we always go async for those
kinds of requests. Use the io-wq IO_WQ_WORK_CONCURRENT flag to ensure we
get the concurrency we desire for this case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq assumes that work will complete fast (and not block), so it
doesn't create a new worker when work is enqueued, if we already have
at least one worker running. This is done on the assumption that if work
is running, then it will complete fast.
Add an option to force io-wq to fork a new worker for work queued. This
is signaled by setting IO_WQ_WORK_CONCURRENT on the work item. For that
case, io-wq will create a new worker, even though workers are already
running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To implement an async stat, we need to provide the flags mapping and
the statx user copy. Make them available internally, through
fs/internal.h.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently fully quiesce the ring before an unregister or update of
the fixed fileset. This is very expensive, and we can be a bit smarter
about this.
Add a percpu refcount for the file tables as a whole. Grab a percpu ref
when we use a registered file, and put it on completion. This is cheap
to do. Upon removal of a file from a set, switch the ref count to atomic
mode. When we hit zero ref on the completion side, then we know we can
drop the previously registered files. When the old files have been
dropped, switch the ref back to percpu mode for normal operation.
Since there's a period between doing the update and the kernel being
done with it, add a IORING_OP_FILES_UPDATE opcode that can perform the
same action. The application knows the update has completed when it gets
the CQE for it. Between doing the update and receiving this completion,
the application must continue to use the unregistered fd if submitting
IO on this particular file.
This takes the runtime of test/file-register from liburing from 14s to
about 0.7s.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This works just like close(2), unsurprisingly. We remove the file
descriptor and post the completion inline, then offload the actual
(potential) last file put to async context.
Mark the async part of this work as uncancellable, as we really must
guarantee that the latter part of the close is run.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not all work can be cancelled, some of it we may need to guarantee
that it runs to completion. Allow the caller to set IO_WQ_WORK_NO_CANCEL
on work that must not be cancelled. Note that the caller work function
must also check for IO_WQ_WORK_NO_CANCEL on work that is marked
IO_WQ_WORK_CANCEL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just one caller of this, and just use filp_close() there manually.
This is important to allow async close/removal of the fd.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This works just like openat(2), except it can be performed async. For
the normal case of a non-blocking path lookup this will complete
inline. If we have to do IO to perform the open, it'll be done from
async context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fds field of struct io_uring_files_update is problematic with regards
to compat user space, as pointer size is different in 32-bit, 32-on-64-bit,
and 64-bit user space. In order to avoid custom handling of compat in
the syscall implementation, make fds __u64 and use u64_to_user_ptr in
order to retrieve it. Also, align the field naturally and check that
no garbage is passed there.
Fixes: c3a31e6056 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes coccicheck warning:
fs/xfs/xfs_reflink.c:236:9-10: WARNING: return of 0/1 in function 'xfs_inode_need_cow' with return type bool
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
[darrick: rename the function so it doesn't sound like a predicate]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl4laHsACgkQnJ2qBz9k
QNnyrQf/W6+QU/BTP0K478PvXOzglNz/UdJf8Y5bzr11Cpx9oV4Mh5MdePViyo+Q
+pqVmNmNsSpFoTt4K+b/TkU8z81jB+uYnxYZgFUUVrpKh1913EriGjna0F94ZlvL
b607o6cfq79J6w8Ddf64Yq415328syxVsmZiK03T04ENHHcSW1zuBiuG2iO1l4lt
SM+QNfSgJe33+fRcbI9Rr7Pywhm1FYZ6EIrymTeWZTGDuU8tN0o3m5vJ9Y0AuHsf
u8V/3TX2bWI/TVFWtFzOQvhq2cCVATmBesgRzaPO7brNMvyGjAvtg/gGSfnPaWPs
ZOSuUuIp2aL5Z4I5ZAwca0lHErkV8w==
=b/h6
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull reiserfs fix from Jan Kara:
"A fixup of a recently merged reiserfs fix which has caused problem
when xattrs were not compiled in"
* tag 'fixes_for_v5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: fix handling of -EOPNOTSUPP in reiserfs_for_each_xattr
There's no need for the ubifs_crypt_is_encrypted() function anymore.
Just use IS_ENCRYPTED() instead, like ext4 and f2fs do. IS_ENCRYPTED()
checks the VFS-level flag instead of the UBIFS-specific flag, but it
shouldn't change any behavior since the flags are kept in sync.
Link: https://lore.kernel.org/r/20191209212721.244396-1-ebiggers@kernel.org
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Eric Biggers <ebiggers@google.com>
We had a report indicating that some read errors aren't reported by the
device stats in the userland. It is important to have the errors
reported in the device stat as user land scripts might depend on it to
take the reasonable corrective actions. But to debug these issue we need
to be really sure that request to reset the device stat did not come
from the userland itself. So log an info message when device error reset
happens.
For example:
BTRFS info (device sdc): device stats zeroed by btrfs(9223)
Reported-by: philip@philip-seeger.de
Link: https://www.spinics.net/lists/linux-btrfs/msg96528.html
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We noticed that we were having regular CG OOM kills in cases where there
was still enough dirty pages to avoid OOM'ing. It turned out there's
this corner case in btrfs's handling of range_cyclic where files that
were being redirtied were not getting fully written out because of how
we do range_cyclic writeback.
We unconditionally were setting scanned = 1; the first time we found any
pages in the inode. This isn't actually what we want, we want it to be
set if we've scanned the entire file. For range_cyclic we could be
starting in the middle or towards the end of the file, so we could write
one page and then not write any of the other dirty pages in the file
because we set scanned = 1.
Fix this by not setting scanned = 1 if we find pages. The rules for
setting scanned should be
1) !range_cyclic. In this case we have a specified range to write out.
2) range_cyclic && index == 0. In this case we've started at the
beginning and there is no need to loop around a second time.
3) range_cyclic && we started at index > 0 and we've reached the end of
the file without satisfying our nr_to_write.
This patch fixes both of our writepages implementations to make sure
these rules hold true. This fixed our over zealous CG OOMs in
production.
Fixes: d1310b2e0c ("Btrfs: Split the extent_map code into two parts")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Dan's smatch tool reports
fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums()
warn: should this be 'count == -1'
which points to the while (count--) loop. With count == 0 the check
itself could decrement it to -1. There's a WARN_ON a few lines below
that has never been seen in practice though.
It turns out that the value of page_bytes_left matches the count (by
sectorsize multiples). The loop never reaches the state where count
would go to -1, because page_bytes_left == 0 is found first and this
breaks out.
For clarity, use only plain check on count (and only for positive
value), decrement safely inside the loop. Any other discrepancy after
the whole bio list processing should be reported by the exising
WARN_ON_ONCE as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a leftover from recently removed bio scheduling framework.
Fixes: ba8a9d0795 ("Btrfs: delete the entire async bio submission framework")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_get_alloc_profile() is a simple wrapper over get_alloc_profile().
The only difference is btrfs_get_alloc_profile() is visible to other
functions in btrfs while get_alloc_profile() is static and thus only
visible to functions in block-group.c.
Let's just fold get_alloc_profile() into btrfs_get_alloc_profile() to
get rid of the unnecessary second function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
From Dave's testing described below, it's possible to drive a file
system to have bogus values of discardable_extents and _bytes. As
btrfs_discard_calc_delay() is the only user of discardable_extents, we
can correct here for any negative discardable_extents/discardable_bytes.
The problem is not reliably reproducible. The workload that created it
was based on linux git tree, switching between release tags, then
everytihng deleted followed by a full rebalance. At this state the
values of discardable_bytes was 16K and discardable_extents was -1,
expected values 0 and 0.
Repeating the workload again did not correct the bogus values so the
offset seems to be stable once it happens.
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Most callers of free_bitmap() only call it if bitmap_info->bytes is 0.
However, there are certain cases where we may free the free space cache
via __btrfs_remove_free_space_cache(). This exposes a path where
free_bitmap() is called regardless. This may result in a bad accounting
situation for discardable_bytes and discardable_extents. So, remove the
stats and call btrfs_discard_update_discardable().
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
It's less than ideal for small extents to eat into our extent budget, so
force extents <= 32KB into the bitmaps save for the first handful.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, there is no way for the free space cache to recover from
being serviced by purely bitmaps because the extent threshold is set to
0 in recalculate_thresholds() when we surpass the metadata allowance.
This adds a recovery mechanism by keeping large extents out of the
bitmaps and increases the metadata upper bound to 64KB. The recovery
mechanism bypasses this upper bound, thus making it a soft upper bound.
But, with the bypass being 1MB or greater, it shouldn't add unbounded
overhead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Give a brief overview for how async discard is implemented.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of how much we are discarding and how often we are reusing
with async discard. The discard_*_bytes values don't need any special
protection because the work item provides the single threaded access.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As mentioned earlier, discarding data can be done either by issuing an
explicit discard or implicitly by reusing the LBA. Metadata block_groups
see much more frequent reuse due to well it being metadata. So instead
of explicitly discarding metadata block_groups, just leave them be and
let the latter implicit discarding be done for them.
For mixed block_groups, block_groups which contain both metadata and
data, we let them be as higher fragmentation is expected.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Non-block group destruction discarding currently only had a single list
with no minimum discard length. This can lead to caravaning more
meaningful discards behind a heavily fragmented block group.
This adds support for multiple lists with minimum discard lengths to
prevent the caravan effect. We promote block groups back up when we
exceed the BTRFS_ASYNC_DISCARD_MAX_FILTER size, currently we support
only 2 lists with filters of 1MB and 32KB respectively.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Expose max_discard_size as a tunable via sysfs and switch the current
fixed maximum to the default value.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Throttle the maximum size of a discard so that we can provide an upper
bound for the rate of async discard. While the block layer is able to
split discards into the appropriate sized discards, we want to be able
to account more accurately the rate at which we are consuming NCQ slots
as well as limit the upper bound of work for a discard.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Provide the ability to rate limit based on kbps in addition to iops as
additional guides for the target discard rate. The delay used ends up
being max(kbps_delay, iops_delay).
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An earlier patch keeps track of discardable_extents. These are
undiscarded extents managed by the free space cache. Here, we will use
this to dynamically calculate the discard delay interval.
There are 3 rate to consider. The first is the target convergence rate,
the rate to discard all discardable_extents over the
BTRFS_DISCARD_TARGET_MSEC time frame. This is clamped by the lower
limit, the iops limit or BTRFS_DISCARD_MIN_DELAY (1ms), and the upper
limit, BTRFS_DISCARD_MAX_DELAY (1s). We reevaluate this delay every
transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of this metric so that we can understand how ahead or behind
we are in discarding rate. This uses the same accounting method as
discardable_extents, deltas between previous/current values and
propagating them up.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The number of discardable extents will serve as the rate limiting metric
for how often we should discard. This keeps track of discardable extents
in the free space caches by maintaining deltas and propagating them to
the global count.
The deltas are calculated from 2 values stored in PREV and CURR entries,
then propagated up to the global discard ctl. The current counter value
becomes the previous counter value after update.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Setup base sysfs directory for discard stats + tunables.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only allowed attributes to be exposed in debug/. Let's let other
groups be created by making debug its own kobject.
This also makes the per-fs debug options separate from the global
features mount attributes. This seems to be needed as
sysfs_create_files() requires const struct attribute * while
sysfs_create_group() can take struct attribute *. This seems nicer as
per file system, you'll probably use to_fs_info().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We probably should call sysfs_remove_group() on debug/.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The prior two patches added discarding via a background workqueue. This
just piggybacked off of the fstrim code to trim the whole block at once.
Well inevitably this is worse performance wise and will aggressively
overtrim. But it was nice to plumb the other infrastructure to keep the
patches easier to review.
This adds the real goal of this series which is discarding slowly (ie. a
slow long running fstrim). The discarding is split into two phases,
extents and then bitmaps. The reason for this is two fold. First, the
bitmap regions overlap the extent regions. Second, discarding the
extents first will let the newly trimmed bitmaps have the highest chance
of coalescing when being readded to the free space cache.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
block_group removal is a little tricky. It can race with the extent
allocator, the cleaner thread, and balancing. The current path is for a
block_group to be added to the unused_bgs list. Then, when the cleaner
thread comes around, it starts a transaction and then proceeds with
removing the block_group. Extents that are pinned are subsequently
removed from the pinned trees and then eventually a discard is issued
for the entire block_group.
Async discard introduces another player into the game, the discard
workqueue. While it has none of the racing issues, the new problem is
ensuring we don't leave free space untrimmed prior to forgetting the
block_group. This is handled by placing fully free block_groups on a
separate discard queue. This is necessary to maintain discarding order
as in the future we will slowly trim even fully free block_groups. The
ordering helps us make progress on the same block_group rather than say
the last fully freed block_group or needing to search through the fully
freed block groups at the beginning of a list and insert after.
The new order of events is a fully freed block group gets placed on the
unused discard queue first. Once it's processed, it will be placed on
the unusued_bgs list and then the original sequence of events will
happen, just without the final whole block_group discard.
The mount flags can change when processing unused_bgs, so when flipping
from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the
discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt
free block groups on the discard_list to the unused_bg queue which will
do the final discard for us.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When discard is enabled, everytime a pinned extent is released back to
the block_group's free space cache, a discard is issued for the extent.
This is an overeager approach when it comes to discarding and helping
the SSD maintain enough free space to prevent severe garbage collection
situations.
This adds the beginning of async discard. Instead of issuing a discard
prior to returning it to the free space, it is just marked as untrimmed.
The block_group is then added to a LRU which then feeds into a workqueue
to issue discards at a much slower rate. Full discarding of unused block
groups is still done and will be addressed in a future patch of the
series.
For now, we don't persist the discard state of extents and bitmaps.
Therefore, our failure recovery mode will be to consider extents
untrimmed. This lets us handle failure and unmounting as one in the
same.
On a number of Facebook webservers, I collected data every minute
accounting the time we spent in btrfs_finish_extent_commit() (col. 1)
and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit()
is where we discard extents synchronously before returning them to the
free space cache.
discard=sync:
p99 total per minute p99 total per minute
Drive | extent_commit() (ms) | commit_trans() (ms)
---------------------------------------------------------------
Drive A | 434 | 1170
Drive B | 880 | 2330
Drive C | 2943 | 3920
Drive D | 4763 | 5701
discard=async:
p99 total per minute p99 total per minute
Drive | extent_commit() (ms) | commit_trans() (ms)
--------------------------------------------------------------
Drive A | 134 | 956
Drive B | 64 | 1972
Drive C | 59 | 1032
Drive D | 62 | 1200
While it's not great that the stats are cumulative over 1m, all of these
servers are running the same workload and and the delta between the two
are substantial. We are spending significantly less time in
btrfs_finish_extent_commit() which is responsible for discarding.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a cap in btrfs in the amount of free extents that a block group
can have. When it surpasses that threshold, future extents are placed
into bitmaps. Instead of keeping track of if a certain bit is trimmed or
not in a second bitmap, keep track of the relative state of the bitmap.
With async discard, trimming bitmaps becomes a more frequent operation.
As a trade off with simplicity, we keep track of if discarding a bitmap
is in progress. If we fully scan a bitmap and trim as necessary, the
bitmap is marked clean. This has some caveats as the min block size may
skip over regions deemed too small. But this should be a reasonable
trade off rather than keeping a second bitmap and making allocation
paths more complex. The downside is we may overtrim, but ideally the min
block size should prevent us from doing that too often and getting stuck
trimming pathological cases.
BTRFS_TRIM_STATE_TRIMMING is added to indicate a bitmap is in the
process of being trimmed. If additional free space is added to that
bitmap, the bit is cleared. A bitmap will be marked
BTRFS_TRIM_STATE_TRIMMED if the trimming code was able to reach the end
of it and the former is still set.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Async discard will use the free space cache as backing knowledge for
which extents to discard. This patch plumbs knowledge about which
extents need to be discarded into the free space cache from
unpin_extent_range().
An untrimmed extent can merge with everything as this is a new region.
Absorbing trimmed extents is a tradeoff to for greater coalescing which
makes life better for find_free_extent(). Additionally, it seems the
size of a trim isn't as problematic as the trim io itself.
When reading in the free space cache from disk, if sync is set, mark all
extents as trimmed. The current code ensures at transaction commit that
all free space is trimmed when sync is set, so this reflects that.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This series introduces async discard which will use the flag
DISCARD_ASYNC, so rename the original flag to DISCARD_SYNC as it is
synchronously done in transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
There is a user report in the mail list, showing the following corrupted
tree blocks:
item 62 key (486836 DIR_ITEM 2543451757) itemoff 6273 itemsize 74
location key (4065004 INODE_ITEM 1073741824) type FILE
transid 21397 data_len 0 name_len 44
name: FILENAME
Note that location key, its offset should be 0 for all INODE_ITEMS.
This caused failed lookup of the inode.
[CAUSE]
That offending value, 1073741824, is 0x40000000. So this looks like a
memory bit flip.
[FIX]
This patch will enhance tree-checker to check location key of
DIR_INDEX/DIR_ITEM/XATTR_ITEM.
There are several different combinations needs to check:
- item_key.type == DIR_INDEX/DIR_ITEM
* location_key.type == BTRFS_INODE_ITEM_KEY
This location_key should follow the check in inode_item check.
* location_key.type == BTRFS_ROOT_ITEM_KEY
Despite the existing check, DIR_INDEX/DIR_ITEM can only points to
subvolume trees.
* All other keys are not allowed.
- item_key.type == XATTR_ITEM
location_key should be all 0.
Reported-by: Mike Gilbert <floppymaster@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ROOT_ITEM key check itself is not as simple as single line check, and
will be reused for both ROOT_ITEM and DIR_ITEM/DIR_INDEX location key
check, so refactor such check into check_root_key().
Also since we are here, fix a comment error about ROOT_ITEM offset,
which is transid of snapshot creation, not some "older kernel behavior".
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inode key check is not as easy as several lines, and it will be called
in more than one location (INODE_ITEM check and
DIR_ITEM/DIR_INDEX/XATTR_ITEM location key check).
So here refactor such check into check_inode_key(). And add extra
checks for XATTR_ITEM.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The @fs_info parameter can be extracted from extent_buffer structure,
and there are already some wrappers getting rid of the @fs_info
parameter.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inspired by btrfs-progs github issue #208, where chunk item in chunk
tree has invalid num_stripes (0).
Although that can already be caught by current btrfs_check_chunk_valid(),
that function doesn't really check item size as it needs to handle chunk
item in super block sys_chunk_array().
This patch will add two extra checks for chunk items in chunk tree:
- Basic chunk item size
If the item is smaller than btrfs_chunk (which already contains one
stripe), exit right now as reading num_stripes may even go beyond
eb boundary.
- Item size check against num_stripes
If item size doesn't match with calculated chunk size, then either the
item size or the num_stripes is corrupted. Error out anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This hasn't been used since it was first introduced in commit
b4bd745d12 ("btrfs: Introduce find_free_extent_ctl structure for later
rework"). Passing that to btrfs_add_reserved_bytes in find_free_extent
is not strictly necessary and using the local ram_bytes instead seems
cleaner.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7087a9d8db ("btrfs: Remove
extent_io_ops::writepage_end_io_hook") left this logic in a confusing
state. Simplify it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass this as 1 from __extent_writepage_io(). The parameter
basically means "pretend I didn't pass in a page". This is silly since
we can simply not pass in the page. Get rid of the parameter from
btrfs_get_extent(), and since it's used as a get_extent_t callback,
remove it from get_extent_t and btree_get_extent(), neither of which
need it.
While we're here, let's document btrfs_get_extent().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In __extent_writepage_io(), we check whether
i_size <= page_offset(page).
Note that if i_size < page_offset(page), then
i_size >> PAGE_SHIFT < page->index.
If i_size == page_offset(page), then
i_size >> PAGE_SHIFT == page->index && offset_in_page(i_size) == 0.
__extent_writepage() already has a check for these cases that
returns without calling __extent_writepage_io():
end_index = i_size >> PAGE_SHIFT
pg_offset = offset_in_page(i_size);
if (page->index > end_index ||
(page->index == end_index && !pg_offset)) {
page->mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
unlock_page(page);
return 0;
}
Get rid of the one in __extent_writepage_io(), which was obsoleted in
211c17f51f ("Fix corners in writepage and btrfs_truncate_page").
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since 40f765805f ("Btrfs: split up __extent_writepage to lower stack
usage"), done_unlocked is simply a return 0. Get rid of it.
Mid-statement block returns don seem to make the code less readable here.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're initializing pg_offset to 0, setting it immediately, then
reassigning it to 0 again after. The former became unnecessary in
211c17f51f ("Fix corners in writepage and btrfs_truncate_page"). The
latter is a leftover that should've been removed in 40f765805f
("Btrfs: split up __extent_writepage to lower stack usage"). Remove
both.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ordered->start, ordered->len, and ordered->disk_len correspond to
fi->disk_bytenr, fi->num_bytes, and fi->disk_num_bytes, respectively.
It's confusing to translate between the two naming schemes. Since a
btrfs_ordered_extent is basically a pending btrfs_file_extent_item,
let's make the former use the naming from the latter.
Note that I didn't touch the names in tracepoints just in case there are
scripts depending on the current naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Snapshot-aware defrag has been disabled since commit 8101c8dbf6
("Btrfs: disable snapshot aware defrag for now") almost 6 years ago.
Let's remove the dead code. If someone is up to the task of bringing it
back, they can dig it up from git.
This is logically a revert of commit 38c227d87c ("Btrfs:
snapshot-aware defrag") except that now we have to clear the
EXTENT_DEFRAG bit to avoid need_force_cow() returning true forever.
The reasons to disable were caused by runtime problems (like long stalls
or memory consumption) on heavily referenced extents (eg. thousands of
snapshots). There were attempts to fix that but never finished.
Current defrag breaks the extent references and some users prefer that
behaviour over the one implemented by snapshot aware (ie. keeping links
for defragmentation). To enable both usecases we'd need to extend
defrag ioctl but let's do that properly from scratch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can encode this in the offset parameter: -1 means use the page
offsets, anything else is a valid offset.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we have two wrappers for __btrfs_lookup_bio_sums():
btrfs_lookup_bio_sums_dio(), which is used for direct I/O, and
btrfs_lookup_bio_sums(), which is used everywhere else. The only
difference is that the _dio variant looks up csums starting at the given
offset instead of using the page index, which isn't actually direct
I/O-specific. Let's clean up the signature and return value of
__btrfs_lookup_bio_sums(), rename it to btrfs_lookup_bio_sums(), and get
rid of the trivial helpers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When closing a device, btrfs_close_one_device() first allocates a new
device, copies the device to close's name, replaces it in the dev_list
with the copy and then finally frees it.
This involves two memory allocation, which can potentially fail. As this
code path is tricky to unwind, the allocation failures where handled by
BUG_ON()s.
But this copying isn't strictly needed, all that is needed is resetting
the device in question to it's state it had after the allocation.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_close_one_device we're decrementing the number of open devices
before we're calling btrfs_close_bdev().
As there is no intermediate exit between these points in this function it
is technically OK to do so, but it makes the code a bit harder to understand.
Move both operations closer together and move the decrement step after
btrfs_close_bdev().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When you snapshot a subvolume containing a subvolume, you get a
placeholder directory where the subvolume would be. These directories
have their own btrfs_dir_ro_inode_operations.
Al pointed out [1] that these directories can use simple_lookup()
instead of btrfs_lookup(), as they are always empty. Furthermore, they
can use the default generic_permission() instead of btrfs_permission();
the additional checks in the latter don't matter because we can't write
to the directory anyways. Finally, they can use the default
generic_update_time() instead of btrfs_update_time(), as the inode
doesn't exist on disk and doesn't need any special handling.
All together, this means that we can get rid of
btrfs_dir_ro_inode_operations and use simple_dir_inode_operations
instead.
1: https://lore.kernel.org/linux-btrfs/20190929052934.GY26530@ZenIV.linux.org.uk/
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
We have a user report, that cppcheck is complaining about a possible
NULL-pointer dereference in btrfs_destroy_dev_replace_tgtdev().
We're first dereferencing the 'tgtdev' variable and the later check for
the validity of the pointer with a WARN_ON(!tgtdev);
But all callers of btrfs_destroy_dev_replace_tgtdev() either explicitly
check if 'tgtdev' is non-NULL or directly allocate 'tgtdev', so the
WARN_ON() is impossible to hit. Just remove it to silence the checker's
complains.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfsic_process_superblock() BUG_ON()s if 'state' is NULL. But this can
never happen as the only caller from btrfsic_process_superblock() is
btrfsic_mount() which allocates 'state' some lines above calling
btrfsic_process_superblock() and checks for the allocation to succeed.
Let's just remove the impossible to hit BUG_ON().
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pavel Begunkov