Commit Graph

76 Commits

Author SHA1 Message Date
Takashi Iwai f44f07cf39 ALSA: line6: Clamp values correctly
The usages of clamp() macro in sound/usb/line6/playback.c are just
wrong, the low and high values are swapped.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:03:28 +01:00
Chris Rorvick 25a0707cf6 ALSA: line6: Improve line6_read/write_data() interfaces
The address cannot be negative so make it unsigned.  Also, an unsigned
int is always sufficient for the length, so no need to overdo it with a
size_t.  Finally, add in range checks to see if the values passed in
actually fit where they are used.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 11:07:48 +01:00
Chris Rorvick 0e806151e8 ALSA: line6: toneport: Use explicit type for firmware version
The firmware version is a single byte so have the variable type agree.
Since the address to this member is passed to the read function, using
an int is not even portable.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:41:59 +01:00
Chris Rorvick 12b00157fd ALSA: line6: Use explicit type for serial number
The serial number (aka ESN) is a 32-bit value.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:39:05 +01:00
Chris Rorvick e474e7fd40 ALSA: line6: Return EIO if read/write not successful
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:37:43 +01:00
Chris Rorvick f3dfd1be08 ALSA: line6: Return error if device not responding
Put an upper bound on how long we will wait for the device to respond to
a read/write request (i.e., 100 milliseconds) and return an error if
this is reached.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:37:30 +01:00
Chris Rorvick e64e94df99 ALSA: line6: Add delay before reading status
The device indicates the result of a read/write operation by making the
status available on a subsequent request from the driver.  This is not
ready immediately, though, so the driver is currently slamming the
device with hundreds of pointless requests before getting the expected
response.  Add a two millisecond delay before each attempt.  This is
approximately the behavior observed with version 4.2.7.1 of the Windows
driver.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:33:55 +01:00
Chris Rorvick 12865cac38 ALSA: line6: Pass driver name to line6_probe()
Provide a unique name for each driver instead of using "line6usb" for
all of them.  This will allow for different configurations based on the
driver type.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08 09:07:07 +01:00
Chris Rorvick f2bd242fa1 ALSA: line6: Pass toneport pointer to toneport_has_led()
It is unlikely this function would ever be used in a context without a
pointer to a `struct usb_line6_toneport', so grab the device type from
it rather than having the caller do it.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08 09:06:08 +01:00
Chris Rorvick 89444601e5 ALSA: line6: Add toneport_has_source_select()
Add a predicate for testing if the device supports source selection to
make the conditional logic around this a bit cleaner.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08 09:05:56 +01:00
Takashi Iwai 9b6ff3fb96 ALSA: line6: Get rid of unused variable in pod.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06 10:12:46 +01:00
Takashi Iwai 02fc76f6a7 ALSA: line6: Create sysfs via snd_card_add_dev_attr()
Use the new helper function to create sysfs entries in the card more
gracefully without races.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06 10:09:23 +01:00
Nicholas Mc Guire 6ccd93bdb9 ALSA: line6: fixup of line6_start_timer argument type
line6_start_timer passes an unsigned int as argument to be used in mod_timer
which is then used by mod_timer as unsigned long, this just fixes up the
argument type. This change helps make static code checkers happy.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03 09:44:04 +01:00
Nicholas Mc Guire 695758c6c4 ALSA: line6: use msecs_to_jiffies for conversion
This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03 09:43:55 +01:00
Chris Rorvick 58647286ab ALSA: line6: Remove unused line6_midibuf_skip_message()
Use of this function ended with commits 3e58c868db ("staging: line6:
drop midi_mask_receive") and af89d2897a ("staging: line6: drop
midi_mask_transmit".)

[Removed the corresponding line in midibuf.h, too -- tiwai]

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-01 09:35:25 +01:00
Chris Rorvick 642adf5f9a ALSA: line6: Remove unused line6_midibuf_status()
This function has not been used since merging the driver into the kernel
(and a good while before that.)

[Removed the corresponding line in midibuf.h, too -- tiwai]

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-01 09:35:24 +01:00
Takashi Iwai 1263f61179 ALSA: line6: Remove snd_line6_ prefix of pcm property fields
It's just superfluous and doesn't give any better readability.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:47 +01:00
Takashi Iwai 72f18d0075 ALSA: line6: Remove invalid capability bits for PODxt Live Variax
PODxt Live Variax doesn't have PCM and HWMON but only MIDI.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:46 +01:00
Takashi Iwai b3313476dd ALSA: line6: Remove struct usb_line6_podhd
It's identical with struct usb_line6.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:45 +01:00
Takashi Iwai 129b3be689 ALSA: line6: Move the contents of usbdefs.h into driver.h
Most of them are rather relevant with the definitions in driver.h,
and there are only a few lines, so just rip it off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:45 +01:00
Takashi Iwai fd9301d33f ALSA: line6: Remove revision.h
The definition is no longer used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:44 +01:00
Takashi Iwai cddbd4f170 ALSA: line6: Tidy up and typo fixes in comments
Just reformatting the comments and typos fixed, no functional
changes.  Particularly,
- avoid the kerneldoc marker "/**",
- reduce multiple comment lines into single lines,
- corrected wrongly referred function names

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:54:43 +01:00
Takashi Iwai 0416980d0a ALSA: line6: Fix volume calculation for big-endian
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 20:50:54 +01:00
Takashi Iwai 247d95ee6d ALSA: line6: Handle error from line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:57 +01:00
Takashi Iwai 2954f914f2 ALSA: line6: Make common PCM pointer callback
Both playback and capture callbacks are identical, so let's merge
them.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:45 +01:00
Takashi Iwai 63e20df1e5 ALSA: line6: Reorganize PCM stream handling
The current code deals with the stream start / stop solely via
line6_pcm_acquire() and line6_pcm_release().  This was (supposedly)
intended to avoid the races, but it doesn't work as expected.  The
concurrent acquire and release calls can be performed without proper
protections, thus this might result in memory corruption.
Furthermore, we can't take a mutex to protect the whole function
because it can be called from the PCM trigger callback that is an
atomic context.  Also spinlock isn't appropriate because the function
allocates with kmalloc with GFP_KERNEL.  That is, these function just
lead to singular problems.

This is an attempt to reduce the existing races.  First off, separate
both the stream buffer management and the stream URB management.  The
former is protected via a newly introduced state_mutex while the
latter is protected via each line6_pcm_stream lock.

Secondly, the stream state are now managed in opened and running bit
flags of each line6_pcm_stream.  Not only this a bit clearer than
previous combined bit flags, this also gives a better abstraction.
These rewrites allows us to make common hw_params and hw_free
callbacks for both playback and capture directions.

For the monitor and impulse operations, still line6_pcm_acquire() and
line6_pcm_release() are used.  They call internally the corresponding
functions for both playback and capture streams with proper lock or
mutex.  Unlike the previous versions, these function don't take the
bit masks but the only single type value.  Also they are supposed to
be applied only as duplex operations.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:36 +01:00
Takashi Iwai f2bb614bb6 ALSA: line6: Clear prev_fbuf and prev_fsize properly
Clearing prev_fsize in line6_pcm_acquire() is pretty racy.
This can be called at any time while the stream is being played.
Rather better to clear prev_fbuf and prev_fsize at the proper place
like the stream stop for capture, and just after copying the monitor /
impulse data inside the spinlock.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:30 +01:00
Takashi Iwai 3d3ae4454d ALSA: line6: Fix racy loopback handling
The impulse and monitor handling in submit_audio_out_urb() isn't
protected thus this can be racy with the capture stream handling.
This patch extends the range to protect via each stream's spinlock
(now the whole submit_audio_*_urb() are covered), and take the capture
stream lock additionally for the impulse and monitor handling part.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:23 +01:00
Takashi Iwai d6ca69d825 ALSA: line6: Minor tidy up in line6_probe()
Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:16 +01:00
Takashi Iwai aca514b823 ALSA: line6: Let snd_card_new() allocate private data
Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe().  This simplifies the primary probe functions.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:07 +01:00
Takashi Iwai f66fd990c5 ALSA: line6: Drop interface argument from private_init and disconnect callbacks
The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev.  Drop them from
the callbacks.  Also, pass the usb id to private_init so that the
driver can deal with it there.  This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:59 +01:00
Takashi Iwai 62a109d9e2 ALSA: line6: Skip volume manipulation during silence copying
A minor optimization; while pausing, the driver just copies the zero
that doesn't need any volume changes.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:52 +01:00
Takashi Iwai c8491535d7 ALSA: line6: Do clipping in volume / monitor manipulations
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:45 +01:00
Takashi Iwai e90576c595 ALSA: line6: Consolidate PCM stream buffer allocation and free
The PCM stream buffer allocation and free are identical for both
playback and capture streams.  Provide single helper functions.
These are used only in pcm.c, thus they can be even static.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:39 +01:00
Takashi Iwai ccaac9ed79 ALSA: line6: Use dev_err()
This is the last remaining snd_printk() usage in this driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:33 +01:00
Takashi Iwai d8131e67f0 ALSA: line6: Consolidate URB unlink and sync helpers
The codes to unlink and sync URBs are identical for both playback and
capture streams.  Consolidate to single helper functions.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:27 +01:00
Takashi Iwai ad0119abe2 ALSA: line6: Rearrange PCM structure
Introduce a new line6_pcm_stream structure and group individual
fields of snd_line6_pcm struct to playback and capture groups.

This patch itself just does rename and nothing else.  More
meaningful cleanups based on these fields shuffling will follow.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:18 +01:00
Takashi Iwai ab5cdcbab2 ALSA: line6: Drop voodoo workarounds
If the problem still really remains, we should fix it instead of
papering over it like this...

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:12 +01:00
Takashi Iwai 9fb754b79e ALSA: line6: Use incremental loop
Using a decremental loop without particular reasons worsens the
readability a lot.  Use incremental loops instead.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:06 +01:00
Takashi Iwai f2a76225b9 ALSA: line6: Drop superfluous spinlock for trigger
The trigger callback is already spinlocked, so we need no more lock
here (even for the linked substreams).  Let's drop it.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:00 +01:00
Takashi Iwai 5343ecf4e5 ALSA: line6: Fix the error recovery in line6_pcm_acquire()
line6_pcm_acquire() tries to restore the newly obtained resources at
the error path.  But some flags aren't recorded and released properly
when the corresponding buffer is already present.  These bits have to
be cleared in the error recovery, too.

Also, "flags_final" can be initialized to zero since we pass only the
subset of "channels" bits.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:53 +01:00
Takashi Iwai 6aa7f8ef29 ALSA: line6: Use logical OR
Fixed a few places using bits OR wrongly for condition checks.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:46 +01:00
Takashi Iwai eab22e4053 ALSA: line6: Fix missing error handling in line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:40 +01:00
Takashi Iwai bc518ba4cc ALSA: line6: Reduce superfluous spinlock in midi.c
The midi_transmit_lock is used always inside the send_urb_lock, thus
it doesn't play any role.  Let's kill it.  Also, rename
"send_urb_lock" as a more simple name "lock" since this is the only
lock for midi.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:34 +01:00
Takashi Iwai b55004f9fd ALSA: line6: Remove unused line6_nop_read()
The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:28 +01:00
Takashi Iwai 6b562f63dd ALSA: line6: Fix memory leak at probe error path
Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:21 +01:00
Takashi Iwai 644d90850c ALSA: line6: Minor refactoring
Split some codes in the lengthy line6_probe().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:15 +01:00
Takashi Iwai f44edd7b2b ALSA: line6/toneport: Implement LED controls via LED class
Instead of non-standard sysfs, reimplement the LED controls on
TonePort as LED class devices.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:08 +01:00
Takashi Iwai bf115fcf95 ALSA: line6/toneport: Fix wrong argument for toneport_has_led()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:02 +01:00
Takashi Iwai eedd0e95d3 ALSA: line6: Don't forget to call driver's destructor at error path
Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:55 +01:00