The dependency for the man page rule using asciidoctor incorrectly
specifies a source file in $(OUTPUT). When building out-of-tree, the
source file is not found, resulting in a fall-back to the following rule
which uses xmlto.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180916151704.GF4765@decadent.org.uk
Fixes: ffef80ecf8 ("perf Documentation: Support for asciidoctor")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set annotation percent type from following choices:
global-period, local-period, global-hits, local-hits
With following report option setup the percent type will be passed to
annotation browser:
$ perf report --percent-type period-local
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global). The period/hits
keywords set the base the percentage is computed on - the samples period
or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --percent-type option to set annotation percent type from following
choices:
global-period, local-period, global-hits, local-hits
Examples:
$ perf annotate --percent-type period-local --stdio | head -1
Percent | Source code ... es, percent: local period)
$ perf annotate --percent-type hits-local --stdio | head -1
Percent | Source code ... es, percent: local hits)
$ perf annotate --percent-type hits-global --stdio | head -1
Percent | Source code ... es, percent: global hits)
$ perf annotate --percent-type period-global --stdio | head -1
Percent | Source code ... es, percent: global period)
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).
The period/hits keywords set the base the percentage is computed on -
the samples period or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing documentation for --desc and --debug options to the 'perf
list' man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180717110738.10779-1-qpakzk@gmail.com
[ Clarify that --desc is by default active ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.
Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding --interval-clear option to clear the screen before next interval.
Committer testing:
# perf stat -I 1000 --interval-clear
And, as expected, it behaves almost like:
# watch -n 0 perf stat -a sleep 1
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a brief introduction about fields to perf-script-python.txt.
It should help python script developers in easily finding what fields
are supported.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1527843663-32288-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the support to read rusage data once the workload is finished and
display the system/user time values:
$ perf stat --null perf bench sched pipe
...
Performance counter stats for 'perf bench sched pipe':
5.342599256 seconds time elapsed
2.544434000 seconds user
4.549691000 seconds sys
It works only in non -r mode and only for workload target.
So as of now, for workload targets, we display 3 types of timings. The
time we meassure in perf stat from enable to disable+period:
5.342599256 seconds time elapsed
The time spent in user and system lands, displayed only for workload
session/target:
2.544434000 seconds user
4.549691000 seconds sys
Those times are the very same displayed by 'time' tool. They are
returned by wait4 call via the getrusage struct interface.
Committer notes:
Had to rename some variables to avoid this on older systems such as
centos:6:
builtin-stat.c: In function 'print_footer':
builtin-stat.c:1831: warning: declaration of 'stime' shadows a global declaration
/usr/include/time.h:297: warning: shadowed declaration is here
Committer testing:
# perf stat --null time perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 5.526 [sec]
5.526534 usecs/op
180945 ops/sec
1.00user 6.25system 0:05.52elapsed 131%CPU (0avgtext+0avgdata 8056maxresident)k
0inputs+0outputs (0major+606minor)pagefaults 0swaps
Performance counter stats for 'time perf bench sched pipe':
5.530978744 seconds time elapsed
1.004037000 seconds user
6.259937000 seconds sys
#
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180605121313.31337-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable complex event names containing [.:=,] symbols to be encoded into Perf
trace using name= modifier e.g. like this:
perf record -e cpu/name=\'OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM\',\
period=0x3567e0,event=0x3c,cmask=0x1/Duk ./futex
Below is how it looks like in the report output. Please note explicit escaped
quoting at cmdline string in the header so that thestring can be directly reused
for another collection in shell:
perf report --header
# ========
...
# cmdline : /root/abudanko/kernel/tip/tools/perf/perf record -v -e cpu/name=\'OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM\',period=0x3567e0,event=0x3c,cmask=0x1/Duk ./futex
# event : name = OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM, , type = 4, size = 112, config = 0x100003c, { sample_period, sample_freq } = 3500000, sample_type = IP|TID|TIME, disabled = 1, inh
...
# ========
#
#
# Total Lost Samples: 0
#
# Samples: 24K of event 'OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM'
# Event count (approx.): 86492000000
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ..............................................
#
14.75% futex [kernel.vmlinux] [k] __entry_trampoline_start
...
perf stat -e cpu/name=\'CPU_CLK_UNHALTED.THREAD:cmask=0x1\',period=0x3567e0,event=0x3c,cmask=0x1/Duk ./futex
10000000 process context switches in 16678890291ns (1667.9ns/ctxsw)
Performance counter stats for './futex':
88,095,770,571 CPU_CLK_UNHALTED.THREAD:cmask=0x1
16.679542407 seconds time elapsed
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c194b060-761d-0d50-3b21-bb4ed680002d@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the perf.data HEADER_CPUDESC feadure header we store first the number
of available CPUs in the system, then the number of CPUs at the time of
writing the header, not the other way around.
Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lakshman Annadorai <lakshmana@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j7o92acm2vnxjv70y4o3swoc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an explanation of each cpu's core and socket identifier to the
perf.data file format documentation.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528074433.16652-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The asciidoc package seems behind the recent big wave of python3
conversion, and we were advised to switch to asciidoctor instead. It's
almost compatible but some extensions used for perf documentation don't
work with it. Here is the patch to cover them, and add the proper
support for asciidoctor.
Pass USE_ASCIIDOCTOR=yes to make for using asciidoctor instead of
asciidoc. The man source and manual attributes are passed via command
options. The support for these attributes have been fixed in the
latest asciidoctor code.
Since asciidoctor can covert to a man page and an HTML directly, we
can omit the dependency on xmlto when USE_ASCIIDOCTOR is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180424150456.17353-1-tiwai@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User can remove files from cache using --remove/--purge options but both
needs list of files as an argument. It's not convenient when you want to
flush out entire cache. Add an option to purge all files from cache.
Ex,
# perf buildid-cache -l
8a86ef73e44067bca52cc3f6cd3e5446c783391c /tmp/a.out
ebe71fdcf4b366518cc154d570a33cd461a51c36 /tmp/a.out.1
# perf buildid-cache -P -v
Removing /tmp/a.out (8a86ef73e44067bca52cc3f6cd3e5446c783391c): Ok
Removing /tmp/a.out.1 (ebe71fdcf4b366518cc154d570a33cd461a51c36): Ok
Purged all: Ok
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-4-ravi.bangoria@linux.vnet.ibm.com
[ Initialize 'err' in build_id_cache__purge_all(), to fix build on debian:7, as it can be used uninitialized ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf buildid-cache' allows to add/remove files into cache but there is
no option to list all cached files. Add --list option to list all
_valid_ cached files.
Ex,
# perf buildid-cache --add /tmp/a.out
# perf buildid-cache -l
8a86ef73e44067bca52cc3f6cd3e5446c783391c /tmp/a.out
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-3-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several options were incorrectly described, some lacked describing
required arguments while others were simply not documented, fix it.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1524382146-19609-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf mem report / perf mem record, pass all unknown options
through to the underlying report/record commands. This makes things
like
perf mem record -a sleep 1
work. Matches how c2c and other tools work.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed a incorrect option and usage to those shown by "perf sched timehist -h",
i.e. the default is really --call-graph, which is equivalent to -g.
Signed-off-by: Takuya Yamamoto <tkydevel@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-8fzo0dlsi1mku5aqx8brep5s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently print count interval for performance counters values is
limited by 10ms so reading the values at frequencies higher than 100Hz
is restricted by the tool.
This change makes perf stat -I possible on frequencies up to 1KHz and,
to some extent, makes perf stat -I to be on-par with perf record
sampling profiling.
When running perf stat -I for monitoring e.g. PCIe uncore counters and
at the same time profiling some I/O workload by perf record e.g. for
cpu-cycles and context switches, it is then possible to observe
consolidated CPU/OS/IO(Uncore) performance picture for that workload.
Tool overhead warning printed when specifying -v option can be missed
due to screen scrolling in case you have output to the console
so message is moved into help available by running perf stat -h.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/b842ad6a-d606-32e4-afe5-974071b5198e@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since a new option '--build-options' is created for 'perf version', so
we need to document it.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1522402036-22915-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've had this in 'perf top' for quite a while, useful if one wishes
to force using /proc/kcore to do annotation using the patched kernel
instead of the ELF image it started from, aka vmlinux.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ircpvox4wzsv7gasrpb28fw9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've had this since 2013, document it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Willy Tarreau <w@1wt.eu>
Fixes: fc2be6968e ("perf symbols: Add new option --ignore-vmlinux for perf top")
Link: https://lkml.kernel.org/n/tip-0jwfueooddwfsw9r603belxi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are going to display NUMA node information in following patches. For
this we need to have physical address data in the sample.
Adding --phys-data as a default option for perf c2c record.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch updates the links to the Quipper library. It is now
available from GitHub and has been updated.
Reported-by: Lakshman Annadorai <lakshmana@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce844 (perf stat: Only auto-merge events
that are PMU aliases).
Non-merging of legacy events is preserved:
$ perf stat -ag -e cache-misses,cache-misses sleep 1
Performance counter stats for 'system wide':
86,323 cache-misses
86,323 cache-misses
1.002623307 seconds time elapsed
But prefix or glob matching auto-merges the events created:
$ perf stat -a -e l3cache/read-miss/ sleep 1
Performance counter stats for 'system wide':
328 l3cache/read-miss/
1.002627008 seconds time elapsed
$ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1
Performance counter stats for 'system wide':
172 l3cache/read-miss/
1.002627008 seconds time elapsed
As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:
$ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
1.002622192 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting on v4.12 event parsing code for dynamic pmu events already
supports prefix-based matching of multiple pmus when creating dynamic
events. E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
passing mypmu/<config>/ as an event spec will result in the creation of
the event in all of the pmus. This change expands this matching through
the use of fnmatch so glob-like expressions can be used to create events
in multiple pmus. E.g., in the system described above if a user only
wants to create the event in mypmu_0 and mypmu_1, mypmu_[01]/<config>/
can be passed.
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Change-Id: Icb25653fc5d5239c20f3bffdfdf4ab4c9c9bb20b
Link: http://lkml.kernel.org/r/1520454947-16977-1-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I've tested to process the perf man pages with asciidoctor that is
picker than asciidoc, and it revealed minor syntax errors in some
documents. Namely, the title markers aren't aligned with the previous
line, hence asciidoctor didn't recognize as titles.
This patch corrects these markers to be processed properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307105441.28512-1-tiwai@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One can set a cgroup as a default cgroup to be used by all events or
set cgroups with the 'perf stat' and 'perf record' behaviour, i.e.
'-G A' will be the cgroup for events defined so far in the command line.
Here in my main machine, with a kvm instance running a rhel6 guinea pig
I have:
# ls -la /sys/fs/cgroup/perf_event/ | grep drw
drwxr-xr-x. 14 root root 360 Mar 6 12:04 ..
drwxr-xr-x. 3 root root 0 Mar 6 15:05 machine.slice
#
So I can go ahead and use that cgroup hierarchy, say lets see what
syscalls are being emitted by threads in that 'machine.slice' hierarchy
that are taking more than 100ms:
# perf trace --duration 100 -G machine.slice
0.188 (249.850 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
250.274 (249.743 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
500.224 (249.755 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
750.097 (249.934 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1000.244 (249.780 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1250.197 (249.796 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1500.124 (249.859 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1750.076 (172.900 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
902.570 (1021.116 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
1923.825 (305.133 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
2000.172 (229.002 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
^C #
If we look inside that cgroup hierarchy we get:
# ls -la /sys/fs/cgroup/perf_event/machine.slice/ | grep drw
drwxr-xr-x. 3 root root 0 Mar 6 15:05 .
drwxr-xr-x. 2 root root 0 Mar 6 16:16 machine-qemu\x2d2\x2drhel6.sandy.scope
#
There is just one, but lets say there were more and we would want to see
5 seconds worth of syscall summary for the threads in that cgroup:
# perf trace --summary -G machine.slice/machine-qemu\\x2d2\\x2drhel6.sandy.scope/ -a sleep 5
Summary of events:
qemu-system-x86 (23667), 143858 events, 24.2%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
ppoll 28492 4348.631 0.000 0.153 11.616 1.05%
futex 19661 140.801 0.001 0.007 2.993 3.20%
read 18440 68.084 0.001 0.004 1.653 4.33%
ioctl 5387 24.768 0.002 0.005 0.134 1.62%
CPU 0/KVM (23744), 449455 events, 75.8%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
ioctl 148364 3401.812 0.000 0.023 11.801 1.15%
futex 36131 404.127 0.001 0.011 7.377 2.63%
writev 29452 339.688 0.003 0.012 1.740 1.36%
write 11315 45.992 0.001 0.004 0.105 1.10%
#
See the documentation about how to set more than one cgroup for
different events in the same command line.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t126jh4occqvu0xdqlcjygex@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf record -F 200000 sleep 1
warning: Maximum frequency rate (15,000 Hz) exceeded, throttling from 200,000 Hz to 15,000 Hz.
The limit can be raised via /proc/sys/kernel/perf_event_max_sample_rate.
The kernel will lower it when perf's interrupts take too long.
Use --strict-freq to disable this throttling, refusing to record.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (15 samples) ]
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
For those wanting that it fails if the desired frequency can't be used:
# perf record --strict-freq -F 200000 sleep 1
error: Maximum frequency rate (15,000 Hz) exceeded.
Please use -F freq option with a lower value or consider
tweaking /proc/sys/kernel/perf_event_max_sample_rate.
#
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oyebruc44nlja499nqkr1nzn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the handy '-F max' shortcut, just introduced to 'perf record', to
reading and using the kernel.perf_event_max_sample_rate value as the
user supplied sampling frequency:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hz04f296zccknnb5at06a6q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using -G with one cgroup and -e with multiple events, only the
first event gets the correct cgroup setting, all events from the second
onwards will track system-wide events.
If the user wants to track multiple events for a specific cgroup, the
user must give parameters like the following:
$ perf stat -e e1 -e e2 -e e3 -G test,test,test
This patch simplify this case, just type one cgroup:
$ perf stat -e e1 -e e2 -e e3 -G test
$ mkdir -p /sys/fs/cgroup/perf_event/empty_cgroup
$ perf stat -e cycles -e cache-misses -a -I 1000 -G empty_cgroup
Before:
1.001007226 <not counted> cycles empty_cgroup
1.001007226 7,506 cache-misses
After:
1.000834097 <not counted> cycles empty_cgroup
1.000834097 <not counted> cache-misses empty_cgroup
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180129154805.GA6284@localhost.didichuxing.com
[ Improved the doc text a bit, providing an example for cgroup + system wide counting ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.
Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the missing --force option on the man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518381517-30766-2-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, 'perf kmem' has a '--force' option, but didn't document it on the
man page. So add it.
Second, the '--time' option has to get a value, but isn't documented on
the man page. Describe it.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518381517-30766-1-git-send-email-qpakzk@gmail.com
[ Add blank like after --force block, as requested by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some options must require an argument. But input, stdio-color, cpu have
no them. So I added it.
Signed-off-by: Jaecheol Shin <jcgod413@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20180207095205.62715-1-jcgod413@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to print counts after N milliseconds and update
'perf stat' documentation accordingly.
Show below is the output of the new option for perf stat.
$ perf stat --time 2000 -e cycles -a
Performance counter stats for 'system wide':
157,260,423 cycles
2.003060766 seconds time elapsed
We can print the count deltas after N milliseconds with this new
introduced option. This option is not supported with "-I" option.
In addition, according to Kangliang's patch(19afd10410), the
monitoring overhead for system-wide core event could be very high if the
interval-print parameter was below 100ms, and the limitation value is
10ms.
So the same warning will be displayed when the time is set between 10ms
to 100ms, and the minimal time is limited to 10ms. Users can make a
decision according to their spcific cases.
Committer notes:
This actually stops the workload after the specified time, then prints
the counts.
So I renamed the option to --timeout and updated the documentation to
state that it will not just print the counts after the specified time,
but will really stop the 'perf stat' session and print the counts.
The rename from 'time' to 'timeout' also fixes the build in systems
where 'time' is used by glibc and can't be used as a name of a variable,
such as centos:5 and centos:6.
Changes since v3:
- none.
Changes since v2:
- modify the time check in __run_perf_stat func to keep some consistency
with the workload case.
- add the warning when the time is set between 10ms to 100ms.
- add the pr_err when the time is set below 10ms.
Changes since v1:
- none.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1517217923-8302-3-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to print counts for fixed number of times and
update 'perf stat' documentation accordingly.
Show below is the output of the new option for perf stat.
$ perf stat -I 1000 --interval-count 2 -e cycles -a
# time counts unit events
1.002827089 93,884,870 cycles
2.004231506 56,573,446 cycles
We can just print the counts for several times with this newly
introduced option. The usage of it is a little like 'vmstat', and it
should be used together with "-I" option.
$ vmstat -n 1 2
procs ---------memory-------------- --swap- ----io-- -system-- ------cpu---
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 0 0 78270544 547484 51732076 0 0 0 20 1 1 1 0 99 0 0
0 0 0 78270512 547484 51732080 0 0 0 16 477 1555 0 0 100 0 0
Changes since v3:
- merge interval_count check and times check to one line.
- fix the wrong indent in stat.h
- use stat_config.times instead of 'times' in cmd_stat function.
Changes since v2:
- none.
Changes since v1:
- change the name of the new option "times-print" to "interval-count".
- keep the new option interval specifically.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1517217923-8302-2-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to display group output for if non grouped events are
detected and user forces --group option. Now for non-group events
recorded like:
$ perf record -e 'cycles,instructions' ls
you can still get group output by using --group option
in report:
$ perf report --group --stdio
...
# Overhead Command Shared Object Symbol
# ................ ....... ................ ......................
#
17.67% 0.00% ls libc-2.25.so [.] _IO_do_write@@GLIB
15.59% 25.94% ls ls [.] calculate_columns
15.41% 31.35% ls libc-2.25.so [.] __strcoll_l
...
Committer note:
We should improve on this by making sure that the first line states that
this is not a group, but since the user doesn't have to force group view
when really using grouped events (e.g. '{cycles,instructions}'), the
user better know what is being done...
Requested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180209092734.GB20449@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the --force option to the man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1517831315-31490-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help with debugging, like the interrupted out of order issue that
will be dealt with in the next patch in this series, changing the code
to deal with:
raw_syscalls:sys_enter 411967179.269 Timer 9609/9626 [2]
raw_syscalls:sys_enter 411967179.213 file:// Content 9609/9609 [3]
328.038 (18446744073709.496 ms): Timer/9626 futex(uaddr: 0x7fc0d4027044, op: WAIT|PRIV, utime: 0x7fc0b0ffdb50 ) ...
raw_syscalls:sys_exit 411967179.225 file:// Content 9609/9609 [3]
327.982 ( 0.012 ms): file:// Conten/9609 futex(uaddr: 0x7fc0d4027040, op: WAKE|PRIV, val: 1 ) = 1
That long duration is the bug.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-fljqiibjn7wet24jd1ed7abc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to --tasks, producing the same output plus /proc/<PID>/maps
similar lines for each mmap record present in a perf.data file.
Please note that not all mmaps are stored, for instance, some of the
non-executable mmaps are only stored when 'perf record --data' is used,
when the user wants to resolve data accesses in addition to asking for
executable mmaps to get the DSO with symtabs.
E.g.:
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ]
[root@jouet ~]# perf report --mmaps
# pid tid ppid comm
0 0 -1 |swapper
4137 4137 -1 |sleep
5628a35a1000-5628a37aa000 r-xp 00000000 3147148 /usr/bin/sleep
7fb65ad51000-7fb65b134000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7fb65b134000-7fb65b35e000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7ffd94b9f000-7ffd94ba1000 r-xp 00000000 0 [vdso]
#
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (8 samples) ]
# perf report --mmaps
# pid tid ppid comm
0 0 -1 |swapper
4161 4161 -1 |sleep
55afae69a000-55afae8a3000 r-xp 00000000 3147148 /usr/bin/sleep
7f569f00d000-7f569f3f0000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7f569f3f0000-7f569f61a000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7fff6fffe000-7fff70000000 r-xp 00000000 0 [vdso]
#
# perf record time sleep 1
0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 2156maxresident)k
0inputs+0outputs (0major+73minor)pagefaults 0swaps
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ]
# perf report --mmaps
# pid tid ppid comm
0 0 -1 |swapper
4281 4281 -1 |time
560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time
7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso]
4282 4282 4281 | sleep
560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time
564b4de3c000-564b4e045000 r-xp 00000000 3147148 /usr/bin/sleep
7f6a5a716000-7f6a5aaf9000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7f6a5aaf9000-7f6a5ad23000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso]
7ffcec7e6000-7ffcec7e8000 r-xp 00000000 0 [vdso]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zulwdlg5rfowogr1qznorvvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --stats option to display quick data statistics of event numbers,
without any further processing, like the one at the end of the perf
report -D command.
$ perf report --stat
Aggregated stats:
TOTAL events: 4566
MMAP events: 113
LOST events: 19
COMM events: 3
FORK events: 400
SAMPLE events: 3315
MMAP2 events: 32
FINISHED_ROUND events: 681
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
I found this useful when hunting lost events for another change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180107160356.28203-12-jolsa@kernel.org
[ Rename it to --stats, plural ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to display sample misc field in form
of letter for each bit:
# perf script -F +misc ...
sched-messaging 1414 K 28690.636582: 4590 cycles ...
sched-messaging 1407 U 28690.636600: 325620 cycles ...
sched-messaging 1414 K 28690.636608: 19473 cycles ...
misc field __________/
The misc bits are assigned to following letters:
PERF_RECORD_MISC_KERNEL K
PERF_RECORD_MISC_USER U
PERF_RECORD_MISC_HYPERVISOR H
PERF_RECORD_MISC_GUEST_KERNEL G
PERF_RECORD_MISC_GUEST_USER g
PERF_RECORD_MISC_MMAP_DATA* M
PERF_RECORD_MISC_COMM_EXEC E
PERF_RECORD_MISC_SWITCH_OUT S
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180107160356.28203-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script has a --time option to limit the time range of output. It
only supports absolute time.
Now this option is extended to support multiple time ranges and support
the percent of time.
For example:
1. Select the first and second 10% time slices:
perf script --time 10%/1,10%/2
2. Select from 0% to 10% and 30% to 40% slices:
perf script --time 0%-10%,30%-40%
Changelog:
v6: Fix the merge issue with latest perf/core branch.
No functional changes.
v5: Add checking of first/last sample time to detect if it's recorded
in perf.data. If it's not recorded, returns error message to user.
v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample
v3: Since the definitions of first_sample_time/last_sample_time
are moved from perf_session to perf_evlist so change the
related code.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report has a --time option to limit the time range of output. It
only supports absolute time.
Now this option is extended to support multiple time ranges and support
the percent of time.
For example:
1. Select the first and second 10% time slices:
perf report --time 10%/1,10%/2
2. Select from 0% to 10% and 30% to 40% slices:
perf report --time 0%-10%,30%-40%
Changelog:
v6: Fix the merge issue with latest perf/core branch.
No functional changes.
v5: Add checking of first/last sample time to detect if it's recorded
in perf.data. If it's not recorded, returns error message to user.
v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample
v3: Since the definitions of first_sample_time/last_sample_time
are moved from perf_session to perf_evlist so change the
related code.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-6-git-send-email-yao.jin@linux.intel.com
[ Add missing colons at end of examples in the man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the default 'perf record' configuration, all samples are processed,
to create the HEADER_BUILD_ID table. So it's very easy to get the
first/last samples and save the time to perf file header via the
function write_sample_time().
Later, at post processing time, perf report/script will fetch the time
from perf file header.
Committer testing:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ]
[root@jouet home]# perf report --header | grep "time of "
# time of first sample : 22947.909226
# time of last sample : 22948.910704
#
# perf report -D | grep PERF_RECORD_SAMPLE\(
0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0
0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0
<SNIP>
3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0
0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0
2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0
#
Changelog:
v7: Just update the patch description according to Arnaldo's suggestion.
v6: Currently '--buildid-all' is not enabled at default. So the walking
on all samples is the default operation. There is no big overhead
to calculate the timestamp boundary in process_sample_event handler
once we already go through all samples. So the timestamp boundary
calculation is enabled by default when '--buildid-all' is not enabled.
While if '--buildid-all' is enabled, we creates a new option
"--timestamp-boundary" for user to decide if it enables the
timestamp boundary calculation.
v5: There is an issue that the sample walking can only work when
'--buildid-all' is not enabled. So we need to let the walking
be able to work even if '--buildid-all' is enabled and let the
processing skips the dso hit marking for this case.
At first, I want to provide a new option "--record-time-boundaries".
While after consideration, I think a new option is not very
necessary.
v3: Remove the definitions of first_sample_time and last_sample_time
from struct record and directly save them in perf_evlist.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report/script/... have a --time option to limit the time range of
output. That's very useful to slice large traces, e.g. when processing
the output of perf script for some analysis.
But right now --time only supports absolute time. Also there is no fast
way to get the start/end times of a given trace except for looking at
it. This makes it hard to e.g. only decode the first half of the trace,
which is useful for parallelization of scripts
Another problem is that perf records are variable size and there is no
synchronization mechanism. So the only way to find the last sample
reliably would be to walk all samples. But we want to avoid that in perf
report/... because it is already quite expensive. That is why storing
the first sample time and last sample time in perf record is better.
This patch creates a new header feature type HEADER_SAMPLE_TIME and
related ops. Save the first sample time and the last sample time to the
feature section in perf file header. That will be done when, for
instance, processing build-ids, where we already have to process all
samples to create the build-id table, take advantage of that to further
amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf
report/script' faster when using --time.
Committer testing:
After this patch is applied the header is written with zeroes, we need
the next patch, for "perf record" to actually write the timestamps:
# perf report -D | grep PERF_RECORD_SAMPLE\(
22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0
<SNIP>
22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0
# perf report --header | grep "time of "
# time of first sample : 0.000000
# time of last sample : 0.000000
#
Changelog:
v7: 1. Rebase to latest perf/core branch.
2. Add following clarification in patch description according to
Arnaldo's suggestion.
"That will be done when, for instance, processing build-ids,
where we already have to process all samples to create the
build-id table, take advantage of that to further amortize
that processing by storing HEADER_SAMPLE_TIME to make
'perf report/script' faster when using --time."
v4: Use perf script time style for timestamp printing. Also add with
the printing of sample duration.
v3: Remove the definitions of first_sample_time/last_sample_time from
perf_session. Just define them in perf_evlist
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support the special characters escaped by '\' in parser. This allows
user to specify versions directly like below.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state\\@GLIBC_2.2.5
Added new event:
probe_libc:malloc_get_state (on malloc_get_state@GLIBC_2.2.5 in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_get_state -aR sleep 1
=====
Or, you can use separators in source filename, e.g.
=====
# ./perf probe -x /opt/test/a.out foo+bar.c:3
Semantic error :There is non-digit character in offset.
Error: Command Parse Error.
=====
Usually "+" in source file cause parser error, but
=====
# ./perf probe -x /opt/test/a.out foo\\+bar.c:4
Added new event:
probe_a:main (on @foo+bar.c:4 in /opt/test/a.out)
You can now use it in all perf tools, such as:
perf record -e probe_a:main -aR sleep 1
=====
escaped "\+" allows you to specify that.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151309111236.18107.5634753157435343410.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add __return suffix for function return events automatically. Without
this, user have to give --force option and will see the number suffix
for each event like "function_1", which is not easy to recognize.
Instead, this adds __return suffix to it automatically. E.g.
=====
# ./perf probe -x /lib64/libc-2.25.so 'malloc*%return'
Added new events:
probe_libc:malloc_printerr__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_consolidate__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_check__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_hook_ini__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_trim__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_usable_size__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_stats__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_info__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:mallochook__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_get_state__return (on malloc*%return in /usr/lib64/libc-2.25.so)
probe_libc:malloc_set_state__return (on malloc*%return in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_set_state__return -aR sleep 1
=====
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275046418.24652.6696011972866498489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a tip for Node.js USDT(User-Level Statically Defined Tracing) probes
in tips.txt
Signed-off-by: Hansuk Hong <flavono123@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20171123160546.9722-1-flavono123@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for computing 'perf stat' style metrics in 'perf script'.
When using leader sampling we can get metrics for each sampling period
by computing formulas over the values of the different group members.
This allows things like fine grained IPC tracking through sampling, much
more fine grained than with 'perf stat'.
The metric is still averaged over the sampling period, it is not just
for the sampling point.
This patch adds a new metric output field for 'perf script' that uses
the existing 'perf stat' metrics infrastructure to compute any metrics
supported by 'perf stat'.
For example to sample IPC:
$ perf record -e '{ref-cycles,cycles,instructions}:S' -a sleep 1
$ perf script -F metric,ip,sym,time,cpu,comm
...
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: 7fd65937d6cc [unknown]
alsa-sink-ALC32 [000] 42815.856074: metric: 0.13 insn per cycle
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: ffffffff81655df0 __schedule
swapper [000] 42815.857961: metric: 0.23 insn per cycle
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: ffffffff8165ad0e _raw_spin_unlock_irqrestore
qemu-system-x86 [000] 42815.858130: metric: 0.46 insn per cycle
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: ffffffffa080e5f2 vmx_vcpu_run
:4972 [000] 42815.858312: metric: 0.45 insn per cycle
TopDown:
This requires disabling SMT if you have it enabled, because SMT would
require sampling per core, which is not supported.
$ perf record -e '{ref-cycles,topdown-fetch-bubbles,\
topdown-recovery-bubbles,\
topdown-slots-retired,topdown-total-slots,\
topdown-slots-issued}:S' -a sleep 1
$ perf script --header -I -F cpu,ip,sym,event,metric,period
...
[000] 121108 ref-cycles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 190350 topdown-fetch-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 2055 topdown-recovery-bubbles: ffffffff8165222e copy_user_enhanced_fast_string
[000] 148729 topdown-slots-retired: ffffffff8165222e copy_user_enhanced_fast_string
[000] 144324 topdown-total-slots: ffffffff8165222e copy_user_enhanced_fast_string
[000] 160852 topdown-slots-issued: ffffffff8165222e copy_user_enhanced_fast_string
[000] metric: 33.0% frontend bound
[000] metric: 3.5% bad speculation
[000] metric: 25.8% retiring
[000] metric: 37.7% backend bound
[000] 112112 ref-cycles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 357222 topdown-fetch-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 3325 topdown-recovery-bubbles: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 323553 topdown-slots-retired: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 270507 topdown-total-slots: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] 341226 topdown-slots-issued: ffffffff8165aec8 _raw_spin_lock_irqsave
[000] metric: 33.0% frontend bound
[000] metric: 2.9% bad speculation
[000] metric: 29.9% retiring
[000] metric: 34.2% backend bound
...
v2:
Use evsel->priv for new fields
Port to new base line, support fp output.
Handle stats in ->stats, not ->priv
Minor cleanups
Extra explanation about the use of the term 'averaging', from Andi in the
thread in the Link: tag below:
<quote Andi>
The current samples contains the sum of event counts for a sampling period.
EventA-1 EventA-2 EventA-3 EventA-4
EventB-1 EventB-2 EventC-3
gap with no events overflow
|-----------------------------------------------------------------|
period-start period-end
^ ^
| |
previous sample current sample
So EventA = 4 and EventB = 3 at the sample point
I generate a metric, let's say EventA / EventB. It applies to the whole period.
But the metric is over a longer time which does not have the same behavior. For
example the gap above doesn't have any events, while they are clustered at the
beginning and end of the sample period.
But we're summing everything together. The metric doesn't know that the gap is
different than the busy period.
That's what I'm trying to express with averaging.
</quote>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171117214300.32746-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to dump trace output to files named by the
monitored events and update perf-script documentation accordingly.
Shown below is output of perf script command with the newly introduced
option.
$ perf record -e cycles -e cs -ag -- sleep 1
$ perf script --per-event-dump
$ ls
perf.data.cycles.dump perf.data.cs.dump
Without per-event-dump support, drawing flamegraphs for different events
would require post processing to separate events. You can monitor only
one event at a time if you want to get flamegraphs for different events.
Using this option, you can get the trace output files named by the
monitored events, and could draw flamegraphs according to the event's
name.
Based-on-a-patch-by: yuzhoujian <yuzhoujian@didichuxing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1508921599-10832-3-git-send-email-yuzhoujian@didichuxing.com
Link: http://lkml.kernel.org/n/tip-8ngzsjdhgiovkupl3r5yy570@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have caches in place to speed up the process of finding
inlined frames and srcline information repeatedly, we can enable this
useful option by default.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-6-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix an incorrect description in the 'perf list' manpage. When a group
does not fit into the hardware it is partially scheduled, but does not
error out.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171010224322.15861-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' had a '-l' option that meant "scale counter values" a very
long time ago, but it currently belongs to 'perf stat' as '-c'. So
remove it. I found this problem in the below case.
$ perf record -e cycles -l sleep 3
Error: unknown switch `l
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1507907412-19813-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
USER_REGS can currently only collected implicitely with call graph
recording. Sometimes it is useful to see them separately, and filter
them. Add a new --user-regs option to record that is similar to
--intr-regs, but acts on user regs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170905170029.19722-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add code to perf list to print metric groups, and metrics
that don't have an event name. The metricgroup code collects
the eventgroups and events into a rblist, and then prints
them according to the configured filters.
The metricgroups are printed by default, but can be
limited by perf list metric or perf list metricgroup
% perf list metricgroup
..
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
FLOPS:
GFLOPs
[Giga Floating Point Operations Per Second]
Frontend:
IFetch_Line_Utilization
[Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions]
Frontend_Bandwidth:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
Memory_BW:
MLP
[Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)]
v2: Check return value of asprintf to fix warning on FC26
Fix key in lookup/addition for the groups list
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic support for standalone metrics specified in JSON files to
perf stat. A metric is a formula that uses multiple events to compute a
higher level result (e.g. IPC).
Previously metrics were always tied to an event and automatically
enabled with that event. But now change it that we can have standalone
metrics. They are in the same JSON data structure as events, but don't
have an event name.
We also allow to organize the metrics in metric groups, which allows a
short cut to select several related metrics at once.
Add a new -M / --metrics option to perf stat that adds the metrics or
metric groups specified.
Add the core code to manage and parse the metric groups. They are
collected from the JSON data structures into a separate rblist. When
computing shadow values look for metrics in that list. Then they are
computed using the existing saved values infrastructure in stat-shadow.c
The actual JSON metrics are in a separate pull request.
% perf stat -M Summary --metric-only -a sleep 1
Performance counter stats for 'system wide':
Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization
317614222.0 1392930775.0 0.0 0.0 0.2 0.1
1.001497549 seconds time elapsed
% perf stat -M GFLOPs flops
Performance counter stats for 'flops':
3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%)
14 fp_comp_ops_exe.sse_scalar_double (66.65%)
0 fp_comp_ops_exe.sse_packed_double (66.67%)
0 fp_comp_ops_exe.sse_packed_single (66.70%)
0 simd_fp_256.packed_double (66.70%)
0 simd_fp_256.packed_single (66.67%)
0 duration_time
3.238372845 seconds time elapsed
v2: Add missing header file
v3: Move find_map to pmu.c
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display the physical address at the tail if it is available.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option phys-data in "perf mem" to record/report physical address.
The default mem sort order for physical address is changed accordingly.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new sort option "phys_daddr" for --mem-mode sort. With this
option applied, perf can sort and report by sample's physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support new sample type PERF_SAMPLE_PHYS_ADDR for physical address.
Add new option --phys-data to record sample physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-2-git-send-email-kan.liang@intel.com
[ Added missing printing in evsel.c patch sent by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As specified in tools/perf/Documentation/perf-config.txt, perf
configuration items must be in 'key = value' format, otherwise the
following error message occurs:
$ perf record -e intel_pt//u -- ls
bad config file line 2 in ~/.perfconfig
$ cat .perfconfig
[intel-pt]
mispred-all
Changing to assigning a value to the key 'mispred-all' fixes the issue:
$ perf record -e intel_pt//u -- ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Capured and wrote 0.031 MB perf.data]
$ cat .perfconfig
[intel-pt]
mispred-all = true
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170831080535.2157-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As defined in tools/perf/util/pmu.c, the EVENT_SOURCE_DEVICE_PATH is
/sys/bus/event_source/devices/ (no traling 's' in event_source)
This patch corrects the path in the perf stat documentation
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jack Henschel <jackdev@mailbox.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/20170824132022.10934-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Target install-man builds them but forget to install.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: af3df2cf17 ("perf tools: Try to build Documentation when installing")
Link: http://lkml.kernel.org/r/150322915300.129715.13645857235229756834.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the --show-total-period option was introduced we forgot to add an
entry in the man page, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1503046013-5555-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --show-nr-samples option to "perf annotate" so that it matches "perf
report".
Committer note:
Note that it can't be used together with --show-total-period, which
seems like a silly limitation, that can be lifted at some point.
Made it bail out if not on --stdio.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046008-5511-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for exporting to SQLite 3 the same data as the PostgreSQL
export.
Committer note:
Tested on RHEL 7.4 using the 1.2.2-4el python-pyside packages from EPEL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1501749090-20357-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ben Hutchings