Add adds a debugfs interface and additional failure modes to LKDTM to
provide similar functionality to the provoke-crash driver submitted here:
http://lwn.net/Articles/371208/
Crashes can now be induced either through module parameters (as before)
or through the debugfs interface as in provoke-crash.
The patch also provides a new "direct" interface, where KPROBES are not
used, i.e., the crash is invoked directly upon write to the debugfs
file. When built without KPROBES configured, only this mode is available.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Cc: M. Mohan Kumar <mohan@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable priv is initialized twice to the same (side effect-free)
expression. Drop one initialization.
A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)
// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@
x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the CS5535 MFGPT hrtimer kconfig option to be with the other MFGPT
options. This makes it easier to find and also removes it from the main
"Device Drivers" menu, where it should not have been.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reorder struct menu_device to remove 8 bytes of padding on 64 bit builds.
Size drops from 136 to 128 bytes, so possibly needing one fewer cache
lines.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A memmap is a directory in sysfs which includes 3 text files: start, end
and type. For example:
start: 0x100000
end: 0x7e7b1cff
type: System RAM
Interface firmware_map_add was not called explicitly. Remove it and add
function firmware_map_add_hotplug as hotplug interface of memmap.
Each memory entry has a memmap in sysfs, When we hot-add new memory, sysfs
does not export memmap entry for it. We add a call in function add_memory
to function firmware_map_add_hotplug.
Add a new function add_sysfs_fw_map_entry() to create memmap entry, it
will be called when initialize memmap and hot-add memory.
[akpm@linux-foundation.org: un-kernedoc a no longer kerneldoc comment]
Signed-off-by: Shaohui Zheng <shaohui.zheng@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace open-coded loop with for_each_set_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename for_each_bit to for_each_set_bit in the kernel source tree. To
permit for_each_clear_bit(), should that ever be added.
The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit(). This is a (very) temporary thing to ease the migration.
[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use of get_irq_chip_data() et al. requires including linux/irq.h
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch corrects author and copyright notices following the split-up of
the GE Fanuc joint venture.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
It's possible that the platform is not allowing reboot via TCO timer
expiration.
Also, differentiate between not finding a chipset that has TCO, and the case
where TCO is present but the driver fails to initialize for some reason.
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Clean-up driver:
* make release the reverse of probe so that both are consistent
* add WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS ioctls.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This driver adds support for the max63{69,70,71,72,73,74} family of
watchdog timer chips.
It has been tested on an Arcom Zeus (max6369).
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Technologic Systems TS-72xx SBCs have external glue logic
CPLD which includes watchdog timer. This driver implements
kernel support for that.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
To prevent deadlock, bios in the hold list should be flushed before
dm_rh_stop_recovery() is called in mirror_suspend().
The recovery can't start because there are pending bios and therefore
dm_rh_stop_recovery deadlocks.
When there are pending bios in the hold list, the recovery waits for
the completion of the bios after recovery_count is acquired.
The recovery_count is released when the recovery finished, however,
the bios in the hold list are processed after dm_rh_stop_recovery() in
mirror_presuspend(). dm_rh_stop_recovery() also acquires recovery_count,
then deadlock occurs.
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Eliminate a 4-byte hole in 'struct dm_io_memory' by moving 'offset' above the
'ptr' to which it applies (size reduced from 24 to 16 bytes). And by
association, 1-4 byte hole is eliminated in 'struct dm_io_request' (size
reduced from 56 to 48 bytes).
Eliminate all 6 4-byte holes and 1 cache-line in 'struct dm_snapshot' (size
reduced from 392 to 368 bytes).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Set a new DM_UEVENT_GENERATED_FLAG when returning from ioctls to
indicate that a uevent was actually generated. This tells the userspace
caller that it may need to wait for the event to be processed.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Free the dm_io structure before calling bio_endio() instead of after it,
to ensure that the io_pool containing it is not referenced after it is
freed.
This partially fixes a problem described here
https://www.redhat.com/archives/dm-devel/2010-February/msg00109.html
thread 1:
bio_endio(bio, io_error);
/* scheduling happens */
thread 2:
close the device
remove the device
thread 1:
free_io(md, io);
Thread 2, when removing the device, sees non-empty md->io_pool (because the
io hasn't been freed by thread 1 yet) and may crash with BUG in mempool_free.
Thread 1 may also crash, when freeing into a nonexisting mempool.
To fix this we must make sure that bio_endio() is the last call and
the md structure is not accessed afterwards.
There is another bio_endio in process_barrier, but it is called from the thread
and the thread is destroyed prior to freeing the mempools, so this call is
not affected by the bug.
A similar bug exists with module unloads - the module may be unloaded
immediately after bio_endio - but that is more difficult to fix.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Remove unused parameters(start and len) of dm_get_device()
and fix the callers.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Only issue a uevent on a resume if the state of the device changed,
i.e. if it was suspended and/or its table was replaced.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
If all mirror legs fail, always return an error instead of holding the
bio, even if the handle_errors option was set. At present it is the
responsibility of the driver underneath us to deal with retries,
multipath etc.
The patch adds the bio to the failures list instead of holding it
directly. do_failures tests first if all legs failed and, if so,
returns the bio with -EIO. If any leg is still alive and handle_errors
is set, do_failures calls hold_bio.
Reviewed-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
This patch pulls the pg_init path activation code out of
process_queued_ios() into a new function.
No functional change.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
When suspending the device we must wait for all I/O to complete, but
pg-init may be still in progress even after flushing the workqueue
for kmpath_handlerd in multipath_postsuspend.
This patch waits for pg-init completion correctly in
multipath_postsuspend().
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
m->queue_io is set to block processing I/Os, and it needs to be kept
while pg-init, which issues multiple path activations, is in progress.
But m->queue is cleared when a path activation completes without error
in pg_init_done(), even while other path activations are in progress.
That may cause undesired -EIO on paths which are not complete activation.
This patch fixes that by not clearing m->queue_io until all path
activations complete.
(Before the hardware handlers were moved into the SCSI layer, pg_init
only used one path.)
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
'suspended' flag in struct multipath was introduced to check whether
the multipath target is in suspended state, but the same check is
done through dm_suspended() now, so remove the flag and related code.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Remove the dm_get() in dm_table_get_md() because dm_table_get_md() could
be called from presuspend/postsuspend, which are called while
mapped_device is in DMF_FREEING state, where dm_get() is not allowed.
Justification for that is the lifetime of both objects: As far as the
current dm design/implementation, mapped_device is never freed while
targets are doing something, because dm core waits for targets to become
quiet in dm_put() using presuspend/postsuspend. So targets should be
able to touch mapped_device without holding reference count of the
mapped_device, and we should allow targets to touch mapped_device even
if it is in DMF_FREEING state.
Backgrounds:
I'm trying to remove the multipath internal queue, since dm core now has
a generic queue for request-based dm. In the patch-set, the multipath
target wants to request dm core to start/stop queue. One of such
start/stop requests can happen during postsuspend() while the target
waits for pg-init to complete, because the target stops queue when
starting pg-init and tries to restart it when completing pg-init. Since
queue belongs to mapped_device, it involves calling dm_table_get_md()
and dm_put(). On the other hand, postsuspend() is called in dm_put()
for mapped_device which is in DMF_FREEING state, and that triggers
BUG_ON(DMF_FREEING) in the 2nd dm_put().
I had tried to solve this problem by changing only multipath not to
touch mapped_device which is in DMF_FREEING state, but I couldn't and I
came up with a question why we need dm_get() in dm_table_get_md().
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
This patch adds two minor fixes while processing device mapper path activation.
Skip failed paths while calling activate_path. If the path is already failed
then activate_path will fail for sure. We don't have to call in that case. In
some case this might cause prolonged retries unnecessarily.
Change the misleading message if the path being activated fails with SCSI_DH_NOSYS.
Signed-off-by: Babu Moger <babu.moger@lsi.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
This patch removes some unnecessary argument casting. There is no
functional change with this patch.
Passes 'struct pgpath' through to pg_init_done() instead of the enclosed
'struct dm_path'.
Tested the changes with LSI storage..
CC: Chandra Seetharaman <chandra.seetharaman@us.ibm.com>
Signed-off-by: Babu Moger <babu.moger@lsi.com>
Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
adt7473 driver is obsoleted by adt7475 driver. And it is scheduled
to be removed in Feb 2010.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Recent changes on the I2C front have left off-by-one array indexes in
3 hwmon drivers. Fix them.
Faulty commit:
e5e9f44c2 i2c: Drop I2C_CLIENT_INSMOD_2 to 8
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andre Prendel <andre.prendel@gmx.de>
Cc: stable@kernel.org
The low bits of temperature registers are status bits, they must be
masked out before converting the register values to temperatures.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Andre Prendel <andre.prendel@gmx.de>
Cc: stable@kernel.org
An off-by-one error caused some inputs to not be created by the driver
when they should. TMP421 gets only one input instead of two, TMP422
gets two instead of three, etc. Fix the bug by listing explicitly the
number of inputs each device has.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Andre Prendel <andre.prendel@gmx.de>
Cc: stable@kernel.org
Hwmon driver for Andigilog aSC7621 family monitoring chips.
Signed-off-by: George Joseph <george.joseph@fairview5.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Add proper locking for the cached variables. Also get rid of
ref_is_vdd, which became obsolete.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Add basic support for the ADT7411. Reads out all conversion results (via I2C,
SPI yet missing) and allows some on-the-fly configuration. Tested with a
custom board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Add watchdog functionality to the Winbond W83793 driver.
Signed-off-by: Sven Anders <anders@anduras.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Function rpm_from_cnt is only used internally so it can be made
static. Make it inline while we're here, for performance reasons
(although hopefully gcc would figure out by itself...)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Acked-by: Martin Michlmayr <tbm@cyrius.com>
Before switching to automatic fan control mode, make sure that all the
trip points make sense. Otherwise, the control loop could lead to
weird fan behavior.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Add support for the automatic fan speed control interface as
implemented by IT8705F chips up to revision F and IT8712F chips up to
revision G. This implementation fits very well in our standard sysfs
interface.
I implemented the old and not the new interface because the only chip
I have at hand is an old one, and the new interface is more difficult
to map to the standard sysfs interface. Adding support later should be
possible though, if someone with a supported chip is interested.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Fix 20 errors and 11 warnings reported by the checkpatch script. The
remainining errors would require more work. The remaining warnings
will be addressed later.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The IT87xxF chips support beeping on alarm, if properly wired and
configured. There is one control bit for each input type (temperature,
fan, voltage.) Let the user see and change them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Only VID-related attributes are left in it87_attributes_opt, so we
might as well rename it to it87_attributes_vid and use this group to
create all attributes at once.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
There is a lot of code redundancy in the creation of the fan and
pwm attributes. Move these attributes to arrays so that the code can
be simplified.
This in turns makes the attributes removal code larger, so move it to
a separate function that can be called in both the standard removal
case and the error path during probing.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Let the user read the PWM-to-temperature mappings. Until the trip
points are also exposed, this is essentially a way to know how the
BIOS has set things up. The ability to change the settings will be
added later, together with the trip points.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The it87 driver doesn't yet support automatic fan control. Let it at
least tell the user when a fan output is in automatic mode. Also let
the user switch from automatic mode (possibly set by the BIOS) to
manual mode and back without losing the settings.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested successfully with an ADM1032 chip on its evaluation board. It
should work fine with all other chips as well.
At this point this is more of a proof-of-concept, we don't do anything
terribly useful on SMBus alert: we simply log the event. But this could
later evolve into libsensors signaling so that user-space applications
can take an appropriate action.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
Restore the chip configuration when unloading the driver. This ensures
we don't leave the chip running if it was initially stopped.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This chips is found on several Zotac Ion ITX boards, amongst others.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: MC Matti <mcmatti17@googlemail.com>
Cc: Manuel Lamotte-Schubert <mls@pronego.com>
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The wireless core made a number of api changes that caused
the winbond driver to break. This patch fixes those errors by
making the needed changes to the driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch. This merge resolves those merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: (49 commits)
drivers/ide: Fix continuation line formats
ide: fixed section mismatch warning in cmd640.c
ide: ide_timing_compute() fixup
ide: make ide_get_best_pio_mode() static
via82cxxx: use ->pio_mode value to determine pair device speed
tx493xide: use ->pio_mode value to determine pair device speed
siimage: use ->pio_mode value to determine pair device speed
palm_bk3710: use ->pio_mode value to determine pair device speed
it821x: use ->pio_mode value to determine pair device speed
cs5536: use ->pio_mode value to determine pair device speed
cs5535: use ->pio_mode value to determine pair device speed
cmd64x: fix handling of address setup timings
amd74xx: use ->pio_mode value to determine pair device speed
alim15x3: fix handling of UDMA enable bit
alim15x3: fix handling of DMA timings
alim15x3: fix handling of command timings
alim15x3: fix handling of address setup timings
ide-timings: use ->pio_mode value to determine fastest PIO speed
ide: change ->set_dma_mode method parameters
ide: change ->set_pio_mode method parameters
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
init: Open /dev/console from rootfs
mqueue: fix typo "failues" -> "failures"
mqueue: only set error codes if they are really necessary
mqueue: simplify do_open() error handling
mqueue: apply mathematics distributivity on mq_bytes calculation
mqueue: remove unneeded info->messages initialization
mqueue: fix mq_open() file descriptor leak on user-space processes
fix race in d_splice_alias()
set S_DEAD on unlink() and non-directory rename() victims
vfs: add NOFOLLOW flag to umount(2)
get rid of ->mnt_parent in tomoyo/realpath
hppfs can use existing proc_mnt, no need for do_kern_mount() in there
Mirror MS_KERNMOUNT in ->mnt_flags
get rid of useless vfsmount_lock use in put_mnt_ns()
Take vfsmount_lock to fs/internal.h
get rid of insanity with namespace roots in tomoyo
take check for new events in namespace (guts of mounts_poll()) to namespace.c
Don't mess with generic_permission() under ->d_lock in hpfs
sanitize const/signedness for udf
nilfs: sanitize const/signedness in dealing with ->d_name.name
...
Fix up fairly trivial (famous last words...) conflicts in
drivers/infiniband/core/uverbs_main.c and security/tomoyo/realpath.c
Turns out that multiple people sent pretty much the same patch
for the same staging drivers. Commit these in two different
branches and merge them together to get a more complete coverage
of the cleanup and properly credit everyone for the work that they
did.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.infradead.org/battery-2.6:
power_supply: bq27x00: fix voltage and current units
power_supply: bq27x00: add status and time properties
power_supply: bq27x00: add BQ27500 support
power_supply: bq27x00: fix temperature conversion
power_supply: bq27x00: remove unused struct fields
power_supply: bq27x00: remove double endian swap
da9030_battery: fix spelling in comment
wm97xx_battery: Clean up some warnings
This fixes some code style issues about assignments in if conditions.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some code style issues like to add one space after a while or
switch statement and before a open parenthesis '(', and to include KERN_
facility level in the printk() functions.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise externals to 0 or NULL
+int comedi_num_legacy_minors = 0;
WARNING: braces {} are not necessary for single statement blocks
+ if (s->subdev_flags & SDF_CMD_READ) {
+ kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (s->subdev_flags & SDF_CMD_WRITE) {
+ kill_fasync(&dev->async_queue, SIGIO, POLL_OUT);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes suspect code indent for
conditional statements found by the checkpatch.pl tool
Signed-off-by: Stewart Robertson <stewart_r@aliencamel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up all the brace
warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up a brace warning
found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up a brace warning
found by the checkpatch.pl tool.
Signed-off-by: Maurice Dawson <maurice2699@btinternet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some coding style issues like include KERN_ facility levels
in some printk() and one trailing whitespace error.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some code style issues like else staments after the close
braces '}' and to use __func__ instead of __FUNCTION__.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all the errors and the majority of the warnings found with
checkpatch.pl script in hfa384x.h, following Gábor Stefanik hints
Signed-off-by: Alessandro Ghedini <al3xbio@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some coding style issues like to use __func__ instead
__FUNCTION__, "foo *bar" instead "foo* bar" and a initial comment with
"/* */" instead "//"
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_660x.c file that fixes up the brace and 80
character issues found by the checkpatch tool
Signed-off-by: Graham M Howe <gmhowe@btopenworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_65xx.c file that fixes up a brace
warning found by the checkpatch.pl tool
Signed-off-by: Graham M Howe <gmhowe@btopenworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the pcmad comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a line over 80 characters and a brace warnings.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits)
Regulators: wm8400 - cleanup platform driver data handling
Regulators: wm8994 - clean up driver data after removal
Regulators: wm831x-xxx - clean up driver data after removal
Regulators: pcap-regulator - clean up driver data after removal
Regulators: max8660 - annotate probe and remove methods
Regulators: max1586 - annotate probe and remove methods
Regulators: lp3971 - fail if platform data was not supplied
Regulators: tps6507x-regulator - mark probe method as __devinit
Regulators: tps65023-regulator - mark probe method as __devinit
Regulators: twl-regulator - mark probe function as __devinit
Regulators: fixed - annotate probe and remove methods
Regulators: ab3100 - fix probe and remove annotations
Regulators: virtual - use sysfs attribute groups
twl6030: regulator: Configure STATE register instead of REMAP
regulator: Provide optional dummy regulator for consumers
regulator: Assume regulators are enabled if they don't report anything
regulator: Convert fixed voltage regulator to use enable_time()
regulator: Add WM8994 regulator support
regulator: enable max8649 regulator driver
regulator: trivial: fix typos in user-visible Kconfig text
...
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits)
vga_switcheroo: disable default y by new rules.
drm/nouveau: fix *staging* driver build with switcheroo off.
drm/radeon: fix typo in Makefile
vga_switcheroo: fix build on platforms with no ACPI
drm/radeon: Fix printf type warning in 64bit system.
drm/radeon/kms: bump the KMS version number for square tiling support.
vga_switcheroo: initial implementation (v15)
drm/radeon/kms: do not disable audio engine twice
Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
drm/radeon/kms: do not preset audio stuff and start timer when not using audio
drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
drm/ttm: fix function prototype to match implementation
drm/radeon: use ALIGN instead of open coding it
drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
drm/i915: enable/disable LVDS port at DPMS time
drm/i915: check for multiple write domains in pin_and_relocate
drm/i915: clean-up i915_gem_flush_gpu_write_domain
drm/i915: reuse i915_gpu_idle helper
drm/i915: ensure lru ordering of fence_list
...
Fixed trivial conflicts in drivers/gpu/vga/Kconfig
We want to keep track of the number of buffers added to a vq. Use
nr_added_bufs instead of 'ret'.
Also, the users of fill_queue() overloaded a local 'err' variable to
check the numbers of buffers allocated. Use nr_added_bufs instead of
err.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
We declare 'len' as int type but it should be 'unsigned int', as
get_buf() wants it to be.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
If the calling convention of ->timer_fn() and ->cleanup_fn() are unified
across hardware versions we can drop parameters to ioat_init_channel() and
unify ioat_is_dma_complete() implementations.
Both ->timer_fn() and ->cleanup_fn() are modified to expect a struct
dma_chan pointer.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The hardware automatically disables further interrupts after each event
until rearmed. This allows a delay to be injected between the occurence
of the interrupt and the running of the cleanup routine. The delay is
scaled by the descriptor backlog and then written to the INTRDELAY
register which specifies the number of microseconds to hold off
interrupt delivery after an interrupt event occurs. According to
powertop this reduces the interrupt rate from ~5000 intr/s to ~150
intr/s per without affecting throughput (simple dd to a raid6 array).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since ioat_cleanup_preamble() and the update of the last completed
descriptor are not synchronized there is a chance that two cleanup threads
can see descriptors to clean. If the first cleans up all pending
descriptors then the second will trigger the BUG_ON.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 9c1390a923ddb6fba1cf9d7440743369140c6d8a replaced
all u_int's with u32 and u_long's with u64. Unfortunately, a u_long
is still only 32-bits so they should have been replaced with u32 also.
This can be verified by the register definitions in dt3155_io.h. It
specifically states that the memory mapped registers are 32-bit.
Fix this by changing all the u64 to u32.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
+#include <asm/io.h>
WARNING: braces {} are not necessary for any arm of this statement
+ if (dev->driver) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (insn->insn == INSN_READ) {
+ data[0] = (new_data[1] >> (chan - base_bitfield_channel)) & 1;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->prealloc_buf && async->prealloc_bufsz == new_size) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->buf_page_list[i].virt_addr == NULL) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) {
+ nbytes = free_end - async->buf_write_alloc_count;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) {
+ nbytes = 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->buf_write_ptr >= async->prealloc_bufsz) {
+ async->buf_write_ptr %= async->prealloc_bufsz;
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not use C99 // comments
+ volatile u_char radioModule;// shows EEPROM, can be overridden at 0x111
ERROR: do not use C99 // comments
+ volatile u_char defaultChannelSet; // shows EEProm, can be overriiden at 0x10A
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Init (MD4_CTX *);
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Update (MD4_CTX *, u8 *, UINT);
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Final (u8 [16], MD4_CTX *);
ERROR: do not use C99 // comments
+#endif //__MD4_H__
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: trailing whitespace
+ * Copyright (C) 1998 Elmer.Joandi@ut.ee, +37-255-13500^I$
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
+#include <asm/io.h>
ERROR: do not use C99 // comments
+//#define ARLAN_DEBUGGING 1
ERROR: "foo * bar" should be "foo *bar"
+extern int arlan_command(struct net_device * dev, int command);
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+#define IFDEBUG( L ) if ( (L) & arlan_debug ) $
ERROR: space prohibited after that open parenthesis '('
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
ERROR: space prohibited before that close parenthesis ')'
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
ERROR: trailing whitespace
+#define ARLAN_FAKE_HDR_LEN 12 $
ERROR: space required after that ',' (ctx:VxV)
+ #define ARLAN_DEBUG(a,b) printk(KERN_DEBUG a, b)
^
ERROR: trailing whitespace
+^I#define ARLAN_DEBUG(a,b) $
ERROR: space required after that ',' (ctx:VxV)
+ #define ARLAN_DEBUG(a,b)
^
ERROR: open brace '{' following struct go on the same line
+struct arlan_shmem
+{
ERROR: trailing whitespace
+ /* Header Signature */ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ int systemId; $
ERROR: open brace '{' following struct go on the same line
+struct TxParam
+{
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_shmem __iomem * card;
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_shmem * conf;
ERROR: trailing whitespace
+ struct arlan_conf_stru * Conf;^I $
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_conf_stru * Conf;
ERROR: trailing whitespace
+ $
ERROR: space required after that ',' (ctx:VxV)
+#define READSHM(to,from,atype) {\
^
ERROR: space required after that ',' (ctx:VxV)
+#define READSHM(to,from,atype) {\
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+#define READSHMEM(from,atype)\
^
ERROR: space required after that ',' (ctx:VxV)
+#define WRITESHM(to,from,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define WRITESHM(to,from,atype) \
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ IFDEBUG(levelSHM) printk(stringSHM,tmpSHM);\
^
ERROR: space required after that ',' (ctx:VxO)
+ writeb(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writeb(val,&(to))
^
ERROR: space required after that ',' (ctx:VxO)
+ writew(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writew(val,&(to))
^
ERROR: space required after that ',' (ctx:VxO)
+ writel(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writel(val,&(to))
^
ERROR: space prohibited after that open parenthesis '('
+ ( ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationMode) > 0) && \
ERROR: space prohibited after that open parenthesis '('
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
ERROR: space prohibited before that close parenthesis ')'
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
ERROR: code indent should use tabs where possible
+ ^IREADSHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage)$
ERROR: space required before the open brace '{'
+#define writeControlRegister(dev, v){\
ERROR: space required after that ',' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
^
ERROR: need consistent spacing around '&' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
^
ERROR: space prohibited before that close parenthesis ')'
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
ERROR: space required after that ',' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
^
ERROR: space required after that ';' (ctx:VxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
^
ERROR: space prohibited before that close parenthesis ')'
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
WARNING: suspect code indent for conditional statements (3, 6)
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
+ writeControlRegister(dev, (cr & ~ARLAN_CHANNEL_ATTENTION));\
ERROR: space required before the open brace '{'
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
ERROR: space required after that close brace '}'
+ }else \
ERROR: space required before the open brace '{'
+#define clearChannelAttention(dev){ \
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
^
ERROR: space required before the open brace '{'
+#define setInterruptEnable(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required before the open brace '{'
+#define clearInterruptEnable(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required before the open brace '{'
+#define setClearInterrupt(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
^
ERROR: space required before the open brace '{'
+#define clearClearInterrupt(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
^
ERROR: space required before the open brace '{'
+#define setPowerOff(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required before the open brace '{'
+#define setPowerOn(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); }
^
ERROR: space required before the open brace '{'
+#define arlan_lock_card_access(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required before the open brace '{'
+#define arlan_unlock_card_access(dev){\
ERROR: trailing whitespace
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } $
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
^
ERROR: space prohibited before that close parenthesis ')'
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ 0 = [-10,10]$
ERROR: code indent should use tabs where possible
+ 0 = [-10,10]$
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_COMPOSITE_ERROR) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_READY) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_COMPOSITE_ERROR) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_READY) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!(stat & DT_S_READY)) {
+ printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!timeout) {
+ printk("dt2801: timeout 1 status=0x%02x\n", stat);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!timeout) {
+ printk("dt2801: timeout 2 status=0x%02x\n", stat);
+ }
WARNING: braces {} are not necessary for any arm of this statement
+ if (stat == -ETIME) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[0] == COMEDI_OUTPUT) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (fifo_empty) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (irq) {
+ printk(", irq %u", irq);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: Macros with complex values should be enclosed in parenthesis
+#define N_WORDS 3000*64
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise statics to 0 or NULL
+static unsigned int ui_Temp = 0;
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[1]) {
[...]
+ } else
[...]
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) {
+ devpriv->ui_AiChannelList[i] = data[4 + i];
+ }
ERROR: that open brace { should be on the previous line
+ } else /* EOC */
+ {
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[1]) {
[...]
+ } else {
[...]
ERROR: that open brace { should be on the previous line
+ if (insn->unused[0] == 222) /* second insn read */
+ {
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < insn->n; i++) {
+ data[i] = devpriv->ui_AiReadData[i];
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
+ err++;
+ }
ERROR: that open brace { should be on the previous line
+ if (cmd->scan_begin_src == TRIG_TIMER) /* Test Delay timing */
+ {
ERROR: that open brace { should be on the previous line
+ if (cmd->convert_src == TRIG_TIMER) /* Test Acquisition timing */
+ {
WARNING: braces {} are not necessary for any arm of this statement
+ if (cmd->stop_src == TRIG_COUNT) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
+ i_APCI3120_ExttrigEnable(dev); /* activate EXT trigger */
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dmalen0 > (devpriv->ui_AiDataLength)) {
+ dmalen0 = devpriv->ui_AiDataLength;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dmalen1 > (devpriv->ui_AiDataLength)) {
+ dmalen1 = devpriv->ui_AiDataLength;
+ }
WARNING: braces {} are not necessary for any arm of this statement
+ if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) {
[...]
+ } else {
[...]
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) /* enable this in without DMA ??? */
+ {
ERROR: that open brace { should be on the previous line
+ if (data[0] == APCI3120_TIMER) /* initialize timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* Initialize Watch dog */
+ {
ERROR: that open brace { should be on the previous line
+ if (data[0] == 2) /* write new value */
+ {
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* start watch dog */
+ {
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* Read watch dog status */
+ {
WARNING: braces {} are not necessary for single statement blocks
+ if (!devpriv->b_OutputMemoryStatus) {
+ ui_Temp = 0;
+
+ } /* if(!devpriv->b_OutputMemoryStatus ) */
ERROR: code indent should use tabs where possible
+ data[0] Value to be written$
ERROR: code indent should use tabs where possible
+ data[1] :1 Set digital o/p ON$
ERROR: code indent should use tabs where possible
+ data[1] 2 Set digital o/p OFF with memory ON$
ERROR: that open brace { should be on the previous line
+ if (ui_Range) /* if 1 then unipolar */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* if 0 then bipolar */
+ {
ERROR: that open brace { should be on the previous line
+ do /* Waiting of DA_READY BIT */
+ {
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ NONE$
ERROR: do not initialise statics to 0 or NULL
+static struct pcmcia_device *cur_dev = NULL;
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->iobase) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (it->options[2]) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->registers) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (thisboard->has_dio) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->BADR0) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->dio_reg_base) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < thisboard->n_8255; i++) {
+ subdev_8255_cleanup(dev, dev->subdevices + i);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->dac) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT) {
+ value |= 1 << (value_width - i);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < max_num_caldacs; i++) {
+ cal2_bits |= DESELECT_CALDAC_BIT(i);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < max_num_caldacs; i++) {
+ cal2_bits |= DESELECT_CALDAC_BIT(i);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: "foo * bar" should be "foo *bar"
+ uint8_t * data);
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->s5933_config) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->count = cmd->chanlist_len * cmd->stop_arg;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ao_count -= num_points;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->attached == 0) {
+ return IRQ_NONE;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((status & (INT | EOAI | LADFUL | DAHFI | DAEMI)) == 0) {
+ comedi_error(dev, "spurious interrupt");
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (status & (DAHFI | DAEMI)) {
+ handle_ao_interrupt(dev, status);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->cmd.stop_src == TRIG_COUNT) {
+ devpriv->ao_count -= num_points;
+ }
ERROR: "foo * bar" should be "foo *bar"
+ uint8_t * data)
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise externals to 0 or NULL
+unsigned int ui_InterruptStatus = 0;
WARNING: braces {} are not necessary for single statement blocks
+ else {
+ outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
+ } /* else if(data[1] == ADDIDATA_OR) */
WARNING: braces {} are not necessary for single statement blocks
+ if (data[1] == 1) {
+ *data = ui_InterruptStatus;
+ } /* if(data[1]==1) */
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ const struct comedi_lrange *pr_AiRangelist;^I/* rangelist for A/D */$
ERROR: code indent should use tabs where possible
+ const struct comedi_lrange *pr_AoRangelist;^I/* rangelist for D/A */$
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (i_Counter == 0) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
BKL isn't anymore present into these files thus it is no necessary still include smp_lock.h.
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
according to 'linux device drivers',
ENOENT, ECONNRESET, ESHUTDOWN are not real transmission errors.
also, a little cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Because the Firmware is loaded from RTL8192SU/rtl8192sfw.bin,
it it save, to remove it from r8192SU_HWImg.c
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some RT-triggered compile errors and typos.
Signed-off-by: Sven-Thorsten Dietrich <sdietrich@novell.com>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch does following improvements:
1. Follow kernel style for comments
2. Reorganize code for readability improvement
3. Use PCI helper macros
4. Use __devinit, __devexit, __devexit_p at necessary places
5. Mark functions and data as static when it is not exported
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Cc: Naren Sankar <nsankar@broadcom.com>
Cc: Jarod Wilson <jarod@wilsonet.com>
Cc: Scott Davilla <davilla@4pi.com>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the prism2usb.c that fixes one line which was over
the 80 character limit by wrapping it to a new line and removes a
commented out configuration for a ZyDAS ZD1201 device since support for
this device with this driver is now deprecated.
Signed-off-by: Jim Dog <jimdog@northern-indymedia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sparse warns that:
drivers/staging/pohmelfs/inode.c:1797: warning: initialization from incompatible pointer type
so fix pohmelfs_write_inode() to have the expected parameters.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix prism2fw.c printk format warning:
drivers/staging/wlan-ng/prism2fw.c:209: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192* drivers in staging use semaphores, so they need
to #include <linux/semaphore.h>.
(similar to staging-rtl8187se-needs-semaphore.h.patch)
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2038: error: field 'ips_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2249: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2250: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:442: error: implicit declaration of function 'down'
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:500: error: implicit declaration of function 'up'
drivers/staging/rtl8192e/ieee80 211/ieee80211_softmac.c:3165: error: implicit declaration of function 'sema_init'
drivers/staging/rtl8192su/ieee80211/ieee80211.h:1330: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192su/ieee80211/ieee80211.h:1331: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192u/ieee80211/ieee80211.h:2010: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192u/ieee80211/ieee80211.h:2011: error: field 'scan_sem' has incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Increased timeout for digital output dma loading, due to report of it
being too short for some hardware.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the amplc_pc236 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the amplc_dio200 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the aio_iiro_16 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes the brace warnings and
comments over 80 characters found by the checkpatch.pl tool. Some code
still goes over 80 characters because I didn't know what to do with it.
Signed-off-by: Stewart Robertson <stewart_r@aliencamel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make sure that batman-adv does not process packets before its
initialization is complete. Some sanity checks added to the receiver
function.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
skb_share_check() returns NULL if it can't allocate more memory but
it still frees the skbuff.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vis code takes a copy of the data inside the skbuf if it is interesting
for us, so we always need to release the skbuf.
Reported-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes the bug discovered by Marek Lindner which did not allow
turning on the vis-server before an interface has been added. With this
patch we are using a global atomic variable for activating and
deactiating the vis-server-mode, which can be used before
inserting an interface.
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes a variable that became obsolete since the skb handling
replaced the packet handling thread.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The routing code has 2 sections which warn about ttl exceeded. The
corresponding warnings were identical which makes it hard to debug. In
addition, batman-adv does not need to warn about ttl exceeded in case
we encountered an echo request as this is commonly used to generate
traceroute graphs.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As in other parts of batman-adv, we should not lock while sending a packet but
keep the lock held for as short as possible. Additionally, we should check
whether the interface is active, otherwise batman_if->net_dev might not be
available ...
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code which uses the raw packet sockets was removed. The only related
dependencies are the skb and netdev handling code. This is provided by
NET in Kconfig.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staticise a number of functions which aren't exported outside their
source files, and also add a __user annotation for the buffer in
iio_event_chrdev_read().
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_daq_700.c file that fixes up brace and 80 character warnings
found by the checkpatch.pl tool
Signed-off-by: Graham M Howe <gman.1352@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
VMIVME-7805 board has a special control register that has to be used in
order to activate the VME bus access via the Universe II bridge.
This control register also handles endianess convertion.
Signed-off-by: Arthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: Vincent Bossier <vincent.bossier@iba-group.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For VME device I/O operations on master windows the user driver tends
to use kern_buf buffer array which is not allocated. This causes an error
when reading from master window device files.
Signed-off-by: Arthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: Vincent Bossier <vincent.bossier@iba-group.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When requesting slave resources A16 addressing mode flag is used to find
available windows. Since the ca91cx42 bridge only supports two A16 slave windows
but four are requested, the driver fails to initialize. The flag has been
changed to A24, which is supported by all slave windows.
Signed-off-by: Arthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: Vincent Bossier <vincent.bossier@iba-group.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the code from the drivers that we are not going to implement before
submitting for review.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for Master Read-Modify-Write cycles on the ca91cx42.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ca91cx42 driver currently incorrectly handles master windows, setting
and retrieving the sizing parameters incorrectly. Also, in the slave window
handling, it uses an incorrectly set variable.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for the DMA controller in the ca91cx42 bridge.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_master_resource structure contains an item called "pci_resource".
Rename to make bus agnostic.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
At the moment the vme bridge drivers are written in a way that only
allows them to support one bridge at a time. Modify the drivers to
enable more than one bridge to be present per board.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check the directions in which the DMA controller is expected to operate
before giving control of a resource.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch corrects author email addresses and Copyright notices as a
result of the split up of the GE Fanuc joint venture.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rtl8187se needs to include semaphore.h to prevent build errors:
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Specify Kconfig dependencies, and include warnings for building as a module
udlfb is dependent on FB_DEFERRED_IO, FB_SYS_*, and FB_MODE_HELPERS
Because many kernels do not include defio (which cannot be built
as a module), yet users want to be able to build udlfb as a module later,
udlfb has ifdefs and these dependency warnings to help udlfb build with or
without certain dependencies, but also print warnings for any lost function.
Even though this kind of flexibility isn't common, we've gotten feedback
from a significant portion of users that they were frustrated without it.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for fbdev mmap clients who don't send damage ioctls
Because DisplayLink devices are out on the other end of usb, their
"framebuffer" is just normal system memory. So memory mapped writes
don't automatically trigger anything. So up to this point, standard
fbdev clients who rely on mmap() will get an unchanging screen.
This patch makes udlfb a client of Jaya Kumar's defio framework - which sets
up page fault triggers, and those faults are accumulated and sent to udlfb
on a defferred basis, to process as damage notifications for the framebuffer.
Because this involves more overhead than a notification directly from
the application (e.g. just passing on X DAMAGE extension notifications),
a sysfs attribute is provided by udlfb to control defio support.
/sys/class/graphics/fb*/use_defio - writing a "0" to this file before
calling mmap() causes defio to not be initialized - instead udlfb
will rely on getting damage notifications directly through the damage ioctl.
There are unsolved rendering problems with defio (horizontal dead regions
on framebuffer, that accumulate over time) which still needs a fix.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework rendering for improved performance
Approx 10-20% gain avg across several "benchmarks": x11perf, gtkperf, glxgears
Moves from a single pre-alloc'd urb protected by a long-held mutex
To a list of (4) pre-alloc'd urbs which can be dispatched asynchonously
Improved rendering algorithm to hardware with lower CPU consumption,
fewer system memory accesses, and slightly higher compression.
Better scalability to multiple processors, especially with
multiple framebuffers active.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework probe to use refcounts and std functions
Because the different parts of the driver (usb, fbdev) tear down
in different orders, the driver previously could crash accessing
data that had already been freed. Refcounting system used to handle.
Reworked probe to make use of refcounts, set mode using std fbops,
and set up sysfs and pre-allocated urbs.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add sysfs controls for edid and performance metrics
There are 8 new files exposed in /sys/class/graphics/fb*
edid - returns 128 byte edid blog, suitable for parsing with parse-edid
metrics_bytes_identical
metrics_bytes_rendered
metrics_bytes_sent
metrics_cpu_kcycles_used
metrics_misc
and metrics_reset, which resets all perf metrics to zero
The 6 perf metrics are of type atomic_t.
So these metrics return precise results for short benchmarks, but
any test approx a minute or longer runtime may roll over.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move to more consistent naming scheme
All udlfb functions start with udlfb_
All functions for udlfb's fbdev interface start with udlfb_ops_
All functinos for udlfb's usb interface start with udlfb_usb_
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add functions to pre-allocate and free usb bulk urbs for core render path.
Udlfb currently allocates a single urb, guarded by a mutex, that is a key
bottleneck. Because udlfb sends so much data, preallocation is most efficient.
Functions will be used by new rendering functions in later patches.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorganize the location of a few things to be closer to related code
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate checkpatch.pl warnings and errors so later patches in series are clean
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For the RTL8187SE, the variable priv->rf_chip is always RF_ZEBRA4
and priv->RegThreeWireMode is always HW_THREE_WIRE_SI. Remove these
2 variables.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleanups as suggested by checkpatch.pl utiltiy.
.o's from before and after cleanup have matching SHA1s.
Signed-off-by: Svenne Krap <svenne@krap.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to ni_atmio.c file to fix up bracing style problems
found by checkpatch.pl tool
Signed-off-by: Graham M Howe <gman.1352@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's clear from the indent levels and the context that there are supposed to
be curly braces here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current driver does not follow the state of the RF switch.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The TODO list includes switching this driver to use the common EEPROM
routines in EEPROM_93CX.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed parenthesis from return statements,
split up assignment and if condition
Signed-off-by: Jochen Maes <jochen.maes@sejo.be>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the rti800 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add suspend and resume functions (which are currently stubs
returning -ENOSYS)
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Provides a better explanation of what this
driver is for in the Kconfig file
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Renames the directory in which the driver files
are located; again for clarity.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patch renames rar_driver to rar_register to clarifiy and differentiate
from rar_handler that will be submitted later
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It turns out that Mimio has a userspace solution for this product using
libusb, and the in-kernel driver is just getting in the way now and
causing problems. So they have asked that the in-kernel driver be
removed. As the staging driver wasn't quite working anyway, and Mimio
supports their libusb solution for all distros, I am removing the
in-kernel driver.
The libusb solution can be downloaded from:
http://www.mimio.com/downloads/mimio_studio_software/linux.asp
Cc: <mwilder@cs.nmsu.edu>
Cc: Phil Hannent <phil@hannent.co.uk>
Cc: Marc Rousseau <Marc.Rousseau@mimio.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes up the sparse and coding style issues found in the
dt3155_io.c file.
No code is changed, only formatting and removing unused code.
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes almost all checkpatch issues in the ni_pcidio comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the rti802 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the dt2815 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the r8180_93cx6.c file that fixes up spacing issue
warnings found by the checkpatch.pl tool
Signed-off-by: Tim Schofield <tim@weberpafrica.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch to the comedi_fops.c file fixes a brace warning found by the checkpatch.pl tool
Signed-off-by: Paul Elms <paul@uprocera.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all of the brace style warnings found by the
checkpatch.pl tool
Signed-off-by: Tony Burrows <tony@tonyburrows.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
String constants that are continued on subsequent lines with \
are not good.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove iw_handle_def private initialisations as they are no longer need
these.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
String constants that are continued on subsequent lines with \
are not good.
Fixed a "is tryied" / tried typo
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the adq12b comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the fl512 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the ni_65xx comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the ni_670x comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the ni_660x comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the poc comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the pcm3730 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the pcm3724 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, we crash (issue BUG_ON) if backing swap
disk size is zero. This can happen is user specified
an extended partition or simply a bad disk as backing
swap. A crash is really an unpleasant surprise to user
for such trivial problems.
Now, we check for this condition and simply fail device
initialization if this is the case.
Additional cleanups:
* use static for all functions
* remove extra newline between functions
* memset backing_swap_name to NULL on device reset
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ramzswap_free_page() already handles the case for zero filled
pages. So, remove redundant logic for the same in ramzswap_write().
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, we return 0 if create_device() fails and 1 otherwise.
Now, proper error code is returned from create_device() and the
same is propagated as module error code from ramzswap_init().
Also added some cleanups for ramzswap_init(), improving function
structure.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ramzswap block size needs to be set equal to PAGE_SIZE to
avoid receiving any unaligned block I/O requests (happens
due to readahead logic during swapon). These unaligned
accesses produce unnecessary I/O errors, scaring users.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make sure we flush block device before freeing all metadata
during reset ioctl.
Signed-off-by: Nitin Gupta <ngupta@vflar.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
64-bit stats corruption was observed when ramzswap was
used on SMP systems. To prevent this, use separate spinlock
to protect these stats.
Also, replace stat_*() with rzs_stat*() to avoid possible
conflict with core kernel code.
Eventually, these will be converted to per-cpu counters
if this driver finds use on large scale systems and this
locking is found to affect scalability.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleanup the driver and fix a faulty if statement.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the dead uncompiled code in usbip_common.c
Signed-off-by: Himanshu Chauhan <himanshu@symmetricore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This completes the structures within the txmac block so we can now
propogate a name change and type removal up a layer and clean up TXMAC as
well
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is another one we don't really need to do much to get rid of
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only used for one trivial thing so turn that into something trivial instead
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have lots of tiny files right now that could be one
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This completes the typedef clean up of the rx specific structures, although
there is plenty do on field names and the like
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All the subtypes are sane so just turn it into something struct and linux
like
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use the proper pointer types for the higher level pointers to the rx_status
object and kill casts
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So kill off the top level type and turn it into a struct
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All the contents of this type are now clean, so kill the top level type
as well
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The contents of MMC_t are clean so kill off the MMC_t typedef
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All the contents are clean so kill off the top level typedefs
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have a clean struct of this now so turn the top level typedefs into a
struct
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is another set of flags as typedef that can be cleaned up.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the typdef for fbr_desc itself so we know it is done
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is only used meaningfully as a definition, we never mask and fetch the
bits apart
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is another 10 bit value with the high bits clear, and where the
type doesn't get used anywhere properly anyway
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Kagstrom