mirror of https://gitee.com/openkylin/linux.git
950889 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
Yu Kuai | d494c25727 |
drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init()
if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes:
|
|
Chun-Kuang Hu | f85acdad07 |
drm/mediatek: Use CPU when fail to get cmdq event
Even though cmdq client is created successfully, without the cmdq event,
cmdq could not work correctly, so use CPU when fail to get cmdq event.
Fixes:
|
|
Wang Hai | 855f3e08d5 |
drm/mediatek: Remove duplicated include
Remove mtk_drm_ddp.h which is included more than once
Fixes:
|
|
Magnus Karlsson | 642e450b6b |
xsk: Do not discard packet when NETDEV_TX_BUSY
In the skb Tx path, transmission of a packet is performed with
dev_direct_xmit(). When NETDEV_TX_BUSY is set in the drivers, it
signifies that it was not possible to send the packet right now,
please try later. Unfortunately, the xsk transmit code discarded the
packet and returned EBUSY to the application. Fix this unnecessary
packet loss, by not discarding the packet in the Tx ring and return
EAGAIN. As EAGAIN is returned to the application, it can then retry
the send operation later and the packet will then likely be sent as
the driver will then likely have space/resources to send the packet.
In summary, EAGAIN tells the application that the packet was not
discarded from the Tx ring and that it needs to call send()
again. EBUSY, on the other hand, signifies that the packet was not
sent and discarded from the Tx ring. The application needs to put
the packet on the Tx ring again if it wants it to be sent.
Fixes:
|
|
Thomas Bogendoerfer | b959b97860 |
MIPS: SNI: Fix spurious interrupts
On A20R machines the interrupt pending bits in cause register need to be updated by requesting the chipset to do it. This needs to be done to find the interrupt cause and after interrupt service. In commit |
|
Linus Torvalds | 5925fa68fe |
perf tools fixes for v5.9: 3rd batch
- Set PERF_SAMPLE_PERIOD if attr->freq is set. - Remove trailing commas from AMD JSON vendor event files. - Don't clear event's period if set by a event definition term. - Leader sampling shouldn't clear sample period in 'perf test'. - Fix the "signal" test inline assembly when built with DEBUG=1. - Fix memory leaks detected by ASAN, some in normal paths, some in error paths. - Fix 2 memory sanitizer warnings in 'perf bench'. - Fix the ratio comments of miss-events in 'perf stat'. - Prevent override of attr->sample_period for libpfm4 events. - Sync kvm.h and in.h headers with the kernel sources. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Test results: The first ones are container based builds of tools/perf with and without libelf support. Where clang is available, it is also used to build perf with/without libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang when clang and its devel libraries are installed. The objtool and samples/bpf/ builds are disabled now that I'm switching from using the sources in a local volume to fetching them from a http server to build it inside the container, to make it easier to build in a container cluster. Those will come back later. Several are cross builds, the ones with -x-ARCH and the android one, and those may not have all the features built, due to lack of multi-arch devel packages, available and being used so far on just a few, like debian:experimental-x-{arm64,mipsel}. The 'perf test' one will perform a variety of tests exercising tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands with a variety of command line event specifications to then intercept the sys_perf_event syscall to check that the perf_event_attr fields are set up as expected, among a variety of other unit tests. Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/ with a variety of feature sets, exercising the build with an incomplete set of features as well as with a complete one. It is planned to have it run on each of the containers mentioned above, using some container orchestration infrastructure. Get in contact if interested in helping having this in place. $ grep "model name" -m1 /proc/cpuinfo model name: AMD Ryzen 9 3900X 12-Core Processor Wed 16 Sep 2020 11:15:24 AM -03 # export PERF_TARBALL=http://192.168.122.1/perf/perf-5.9.0-rc5.tar.xz # dm 1 70.56 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final) 2 71.39 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final) 3 76.82 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final) 4 83.00 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0) 5 82.55 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1) 6 85.51 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1) 7 105.20 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0) 8 120.42 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0) 9 104.13 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c) 10 71.21 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final) 11 87.61 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0 12 84.82 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1 13 62.90 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final) 14 100.02 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2) 15 22.01 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) 16 21.86 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) 17 28.10 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23) 18 33.15 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) 19 113.26 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03) 20 55.11 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20200908 releases/gcc-10.2.0-203-g127d693955, clang version 10.0.1 21 68.80 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) 22 79.02 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final) 23 75.06 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final) 24 79.97 debian:experimental : Ok gcc (Debian 10.2.0-7) 10.2.0, Debian clang version 11.0.0-+rc2-5 25 32.05 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 10.2.0-3) 10.2.0 26 29.14 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0 27 31.20 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0 28 32.64 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7) 29 32.22 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final) 30 72.38 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final) 31 83.19 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final) 32 26.12 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710 33 83.82 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final) 34 95.77 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final) 35 96.57 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final) 36 106.17 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final) 37 111.99 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29) 38 115.80 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30) 39 29.10 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225 40 26.39 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225 41 116.53 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31) 42 98.99 fedora:32 : Ok gcc (GCC) 10.2.1 20200723 (Red Hat 10.2.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32) 43 18.48 fedora:rawhide : FAIL gcc (GCC) 10.2.1 20200826 (Red Hat 10.2.1-3), clang version 11.0.0 (Fedora 11.0.0-0.2.rc1.fc34) util/scripting-engines/trace-event-python.c: In function 'python_start_script': util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes] 1595 | PyMODINIT_FUNC (*initfunc)(void); | ^~~~~~~~~~~~~~ At this point I should realize nobody is looking at this... Prove me wrong and provide a fix, this is tricky and I need your help :-) 44 34.56 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0 45 71.64 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final) 46 89.60 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final) 47 114.09 mageia:7 : Ok gcc (Mageia 8.4.0-1.mga7) 8.4.0, clang version 8.0.0 (Mageia 8.0.0-1.mga7) 48 93.72 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1 49 246.86 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-0.20200909.1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-release-11.x/clang 5cb8ffbab42358a7cdb0a67acfadb84df0779579) 50 115.76 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548) 51 124.22 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238) 52 114.75 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1 53 108.32 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553) 54 108.20 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1 55 28.17 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1) 56 33.23 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.5) 57 113.78 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d) 58 31.14 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0) 59 33.05 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4 60 81.61 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final) 61 27.06 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 62 27.31 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 63 26.36 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 64 27.31 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 65 27.09 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 66 26.11 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 67 275.70 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final) 68 29.17 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0 69 28.84 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0 70 23.26 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 71 28.13 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 72 28.87 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 73 30.32 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 74 184.84 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 75 25.52 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 76 26.90 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 77 25.95 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 78 81.24 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final) 79 86.43 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1 80 30.55 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10-20200411-0ubuntu1) 10.0.1 20200411 (experimental) [master revision bb87d5cc77d:75961caccb7:f883c46b4877f637e0fa5025b4d6b5c9040ec566] 81 85.38 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-5ubuntu2) 10.2.0, Ubuntu clang version 10.0.1-1 $ # uname -a Linux five 5.9.0-rc3 #1 SMP Mon Aug 31 08:38:27 -03 2020 x86_64 x86_64 x86_64 GNU/Linux # git log --oneline -1 |
|
Linus Torvalds | 05da40eb47 |
A handful of clk driver fixes. Mostly they're for error paths or
improper memory allocations sizes. Nothing as exciting as a wildfire. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl9hcJURHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSW23RAAu5umYqToFPEK9sgoO642XPnQYrG2zgZh 0+gj5svPp6fJtgxq+Ms2V9iMo9aS6qz2YqAua3N1iQPEo+aYXaB1KSBZnn/dGmqu 0SJt+rit7sftoMLYe1iO3LPLMmAXBU7UGB8tdkb+GY9tp/tocIJHtRzoSfnOcVt2 XGtjoFUu4oqihQHBw7lx/gE4oxVKDa5k3/SmeUAIdIP/035Rrz3iH5svIoLcDgo0 EjPbJMxEj0u4CB2bUmsyFpQ0EO5Z1poGnq5VMDkz3G/yZf2YU56gk9iZElQSiJ+d hnLyk0G/12ERzwlZTgg76Vmpn1Lb+lq03fLqZuy4zMsD6+e/H6Qly+nVcAg4Xs6K uQh059qjwhcyQspmvx/WlRjet1+8aoS57f8L7sGF88RWTZ7zeU1foADeUJohEXMq 6tNPD60I3mNJXV1moaDf0EjO9LbwO/VLDDZSg3w/6vaJ6oLkDCSM7gxnTRDdg5bL IRswfH+WjLlCjmYsAZ4rGrYpIQRXwX0YLdeNcI3Fa4+ns3bX3zMkBY0gVbf4nARI WD9DlBQy52q2U8jerWq99p4mQqqmtH5UdTHa9YRhHvtwKbArSuKguEfmG0p8JLD0 CEPbacMMWW0vPpgLNhoGPh2APPj1MSfueUXopFjPSZkHncCIDRgll0FD+PfTXMf/ VVQj6qokrWY= =ayvd -----END PGP SIGNATURE----- Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "A handful of clk driver fixes. Mostly they're for error paths or improper memory allocations sizes. Nothing as exciting as a wildfire" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe() clk: versatile: Add of_node_put() before return statement clk: bcm: dvp: Select the reset framework clk: rockchip: Fix initialization of mux_pll_src_4plls_p clk: davinci: Use the correct size when allocating memory |
|
Leon Romanovsky | 6279e774b0 |
MAINTAINERS: Fix Max's and Shravan's emails
Max's and Shravan's usernames were changed while @mellanox.com emails
were transferred to be @nvidia.com.
Fixes:
|
|
Peter Zijlstra | 1fecfdbb7a |
ACPI: processor: Take over RCU-idle for C3-BM idle
The C3 BusMaster idle code takes lock in a number of places, some deep inside the ACPI code. Instead of wrapping it all in RCU_NONIDLE, have the driver take over RCU-idle duty and avoid flipping RCU state back and forth a lot. ( by marking 'C3 && bm_check' as RCU_IDLE, we _must_ call enter_bm() for that combination, otherwise we'll loose RCU-idle, this requires shuffling some code around ) Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Peter Zijlstra | 8747f2022f |
cpuidle: Allow cpuidle drivers to take over RCU-idle
Some drivers have to do significant work, some of which relies on RCU still being active. Instead of using RCU_NONIDLE in the drivers and flipping RCU back on, allow drivers to take over RCU-idle duty. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Peter Zijlstra | a889a23a98 |
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
Make acpi_processor_idle() use the generic TLB flushing code. This again removes RCU usage after rcu_idle_enter(). (XXX make every C3 invalidate TLBs, not just C3-BM) Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Peter Zijlstra | aa6b43d57f |
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
Make acpi_processor_idle use the common broadcast code, there's no reason not to. This also removes some RCU usage after rcu_idle_enter(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Hou Tao | e6b1a44ecc |
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given
that percpu-rwsem is a blocking primitive, should be just fine.
However, file_end_write() is used from IRQ context and will cause
load-store issues on architectures where the per-cpu accessors are not
natively irq-safe.
Fix it by using the IRQ-safe this_cpu_*() for operations on
read_count. This will generate more expensive code on a number of
platforms, which might cause a performance regression for some of the
other percpu-rwsem users.
If any such is reported, we can consider alternative solutions.
Fixes:
|
|
Qi Liu | ce9c13f31b |
perf stat: Fix the ratio comments of miss-events
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache, iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache accesses" seems better. The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are fixed in the same way. Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: linuxarm@huawei.com Link: http://lore.kernel.org/lkml/1600253331-10535-1-git-send-email-liuqi115@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
Tetsuo Handa | ec0972adec |
fbcon: Fix user font detection test at fbcon_resize().
syzbot is reporting OOB read at fbcon_resize() [1], for commit |
|
Ricardo Neri | e1c2d96cd0 |
powercap: RAPL: Add support for Lakefield
Simply add Lakefield model ID. No additional changes are needed. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> [ rjw: Minor subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Tobias Diedrich | 3c5a87be17 |
serial: 8250_pci: Add Realtek 816a and 816b
These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards). Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board. I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested). With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 82 IOMMU group: 11 Region 0: I/O ports at 2200 [size=256] Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [178 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us 02:00.2 0700: 10ec:816b (rev 0e) [...same...] Signed-off-by: Tobias Diedrich <tobiasdiedrich@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
Johan Hovold | e0830dbf71 |
serial: core: fix console port-lock regression
Fix the port-lock initialisation regression introduced by commit |
|
Johan Hovold | fe88c64892 |
serial: core: fix port-lock initialisation
Commit |
|
Madhusudanarao Amara | d69030c91b |
usb: typec: intel_pmc_mux: Handle SCU IPC error conditions
Check and return if there are errors. The response bits are valid
only on no errors.
Fixes:
|
|
Penghao | bcea6dafee |
USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by: Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
Oliver Neukum | 325b008723 |
USB: UAS: fix disconnect by unplugging a hub
The SCSI layer can go into an ugly loop if you ignore that a device is
gone. You need to report an error in the command rather than in the
return value of the queue method.
We need to specifically check for ENODEV. The issue goes back to the
introduction of the driver.
Fixes:
|
|
Heikki Krogerus | 386e15a650 |
usb: typec: ucsi: Prevent mode overrun
Sometimes the embedded controller firmware does not
terminate the list of alternate modes that the partner
supports in its response to the GET_ALTERNATE_MODES command.
Instead the firmware returns the supported alternate modes
over and over again until the driver stops requesting them.
If that happens, the number of modes for each alternate mode
will exceed the maximum 6 that is defined in the USB Power
Delivery specification. Making sure that can't happen by
adding a check for it.
This fixes NULL pointer dereference that is caused by the
overrun.
Fixes:
|
|
Heikki Krogerus | 130a96d698 |
usb: typec: ucsi: acpi: Increase command completion timeout value
UCSI specification quite clearly states that if a command
can't be completed in 10ms, the firmware must notify
about BUSY condition. Unfortunately almost none of the
platforms (the firmware on them) generate the BUSY
notification even if a command can't be completed in time.
The driver already considered that, and used a timeout
value of 5 seconds, but processing especially the alternate
mode discovery commands takes often considerable amount of
time from the firmware, much more than the 5 seconds. That
happens especially after bootup when devices are already
connected to the USB Type-C connector. For now on those
platforms the alternate mode discovery has simply failed
because of the timeout.
To improve the situation, increasing the timeout value for
the command completion to 1 minute. That should give enough
time for even the slowest firmware to process the commands.
Fixes:
|
|
Chris Wilson | 20612303a0 |
drm/i915: Filter wake_flags passed to default_wake_function
(NOTE: This is the minimal backportable fix, a full fix is being developed at https://patchwork.freedesktop.org/patch/388048/) The flags passed to the wait_entry.func are passed onwards to try_to_wake_up(), which has a very particular interpretation for its wake_flags. In particular, beyond the published WF_SYNC, it has a few internal flags as well. Since we passed the fence->error down the chain via the flags argument, these ended up in the default_wake_function confusing the kernel/sched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: |
|
Chris Wilson | b82a8b93b4 |
drm/i915: Be wary of data races when reading the active execlists
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. The latest occurence of this was spotted by KCSAN: [ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915] [ 1413.563221] [ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1: [ 1413.563548] __await_execution+0x217/0x370 [i915] [ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915] [ 1413.564235] i915_request_await_object+0x421/0x490 [i915] [ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915] [ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915] [ 1413.564998] drm_ioctl_kernel+0x156/0x1b0 [ 1413.565022] drm_ioctl+0x2ff/0x480 [ 1413.565046] __x64_sys_ioctl+0x87/0xd0 [ 1413.565069] do_syscall_64+0x4d/0x80 [ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To complicate matters, we have to both avoid the read tearing of *active and avoid any write tearing as perform the pending[] -> inflight[] promotion of the execlists. This is because we cannot rely on the memcpy doing u64 aligned copies on all kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE annotations to satisfy KCSAN. v2: When in doubt, write the same comment again. v3: Expanded commit message. Fixes: |
|
Chris Wilson | c2314b8bd4 |
drm/i915/gem: Reduce context termination list iteration guard to RCU
As we now protect the timeline list using RCU, we can drop the timeline->mutex for guarding the list iteration during context close, as we are searching for an inflight request. Any new request will see the context is banned and not be submitted. In doing so, pull the checks for a concurrent submission of the request (notably the i915_request_completed()) under the engine spinlock, to fully serialise with __i915_request_submit()). That is in the case of preempt-to-busy where the request may be completed during the __i915_request_submit(), we need to be careful that we sample the request status after serialising so that we don't miss the request the engine is actually submitting. Fixes: |
|
Chris Wilson | e7d95527f2 |
drm/i915/gem: Delay tracking the GEM context until it is registered
Avoid exposing a partially constructed context by deferring the list_add() from the initial construction to the end of registration. Otherwise, if we peek into the list of contexts from inside debugfs, we may see the partially constructed context and chase down some dangling incomplete pointers. Reported-by: CQ Tang <cq.tang@intel.com> Fixes: |
|
David S. Miller | d5d325eae7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== pull-request: bpf 2020-09-15 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 19 day(s) which contain a total of 10 files changed, 47 insertions(+), 38 deletions(-). The main changes are: 1) docs/bpf fixes, from Andrii. 2) ld_abs fix, from Daniel. 3) socket casting helpers fix, from Martin. 4) hash iterator fixes, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
Yonghong Song | ce880cb825 |
bpf: Fix a rcu warning for bpffs map pretty-print
Running selftest
./btf_btf -p
the kernel had the following warning:
[ 51.528185] WARNING: CPU: 3 PID: 1756 at kernel/bpf/hashtab.c:717 htab_map_get_next_key+0x2eb/0x300
[ 51.529217] Modules linked in:
[ 51.529583] CPU: 3 PID: 1756 Comm: test_btf Not tainted 5.9.0-rc1+ #878
[ 51.530346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014
[ 51.531410] RIP: 0010:htab_map_get_next_key+0x2eb/0x300
...
[ 51.542826] Call Trace:
[ 51.543119] map_seq_next+0x53/0x80
[ 51.543528] seq_read+0x263/0x400
[ 51.543932] vfs_read+0xad/0x1c0
[ 51.544311] ksys_read+0x5f/0xe0
[ 51.544689] do_syscall_64+0x33/0x40
[ 51.545116] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The related source code in kernel/bpf/hashtab.c:
709 static int htab_map_get_next_key(struct bpf_map *map, void *key, void *next_key)
710 {
711 struct bpf_htab *htab = container_of(map, struct bpf_htab, map);
712 struct hlist_nulls_head *head;
713 struct htab_elem *l, *next_l;
714 u32 hash, key_size;
715 int i = 0;
716
717 WARN_ON_ONCE(!rcu_read_lock_held());
In kernel/bpf/inode.c, bpffs map pretty print calls map->ops->map_get_next_key()
without holding a rcu_read_lock(), hence causing the above warning.
To fix the issue, just surrounding map->ops->map_get_next_key() with rcu read lock.
Fixes:
|
|
Martin KaFai Lau | 8c33dadc3e |
bpf: Bpf_skc_to_* casting helpers require a NULL check on sk
The bpf_skc_to_* type casting helpers are available to BPF_PROG_TYPE_TRACING. The traced PTR_TO_BTF_ID may be NULL. For example, the skb->sk may be NULL. Thus, these casting helpers need to check "!sk" also and this patch fixes them. Fixes: |
|
Linus Torvalds | 9803ab1722 |
SCSI fixes on 20200915
Just one fix in libsas for a resource leak in an error path. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX2FC6yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishY6fAPwKubOj 52FQ48CXqFeLHbyGdKJR+ka5go9Am5Fd9PWS6gD/Tu+3xk553jSBJ1Adblhnltjc nMf7l2jyjblSVBc4nXo= =FBSu -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Just one fix in libsas for a resource leak in an error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix error path in sas_notify_lldd_dev_found() |
|
Linus Torvalds | 1e484d3887 |
device_cgroup RCU warning fix from Amol Grover <frextrite@gmail.com>
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEgycj0O+d1G2aycA8rZhLv9lQBTwFAl9hIXMACgkQrZhLv9lQ BTy34RAAkt6BAcEPA9hSMkvRCrA44Doq6jaK45vmMExuWh2/QMvfK1E4KjxXGn0U e74TcCPgh+AuSWQABAuZrMVx4Ai9fyDBWkhtzwz7XsHeUtUvEMUkb2fzKRGoBg6h 6WvYtzdO4NHEcy3Lf59EYW2Hm08eEjZfmVMRlCF6MoLmsj/ifh+yQ3Xxy0RAd/Jo X4IvSwan6EitXNEHy7onmpDjL7BvncXs1dXpGXqHzhLF8W4EtFmIZGH3T5/W82n0 IgtEqqsCw5MY5mSIixjUPcRxbi+NUkymEzYQyvceVU0W+voMITQ8Qb/NkGMklMLE KUHwP1r4q1XR1WVFqHxRCPB4c+njNwiTUtAO44ODNNgC1R+wT70CGhujP1bSW6Eo Gf5DWJniD9I8viBWD5tYBFWPBlH+DfURY8wqkrEEC8fntsIDkSWf2XK2dVBrDxMM PxXOYEKfZVIRQTRAz/HJmCAoW8rVkCa5ptpKFJzWvoLqS3FclFRg0i1FZ6fcMuz1 4phZCL+pGDSp3yhSi6lamdhPhRPq9Pbk4ZVSPK2gAg4VzhI6w7TY/zicZapaRQ0g hScOmTk4YKqLhUbcWiBErH/AwV6op+H4DwG/A1z8ASUxQST5oiJk0d7dMGCF9cgG VuHXj/dQbtymUMjo7MSqLqpx0ieEarEqZ2BOgn1DVTYgn4c1yms= =DgJN -----END PGP SIGNATURE----- Merge tag 'fixes-v5.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer fix from James Morris: "A device_cgroup RCU warning fix from Amol Grover" * tag 'fixes-v5.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: device_cgroup: Fix RCU list debugging warning |
|
Linus Torvalds | 00acc50506 |
hyperv-fixes for 5.9-rc6
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl9grKITHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXu7gB/4+uML5b8rd06pJ3+NC53Mh5ooePvL5 CdZsLJP+reK8WeG4s3sXSs4kgzwZQcDFEC6k4STvM7B6fOEhvpi2Y7kuhayy75X4 6mZ7qoAnVvy83RZxAxDdgr0PuPRpL8m3cq1C+2hgOe2JaShhLVOC35IZqcBFKxrL pp6blm7BFC2ST93JKQ3rLT0dhuT2CyLVkXheXbUK+36UnR1OxmgZLVp3PuPXVjdm 1zEkSjWCPAV/I78U7GOoLFx+sUgJwuG+owRQ1o8ZldMO/yj2gfCzfsSDivnjgB10 Q8ihUYZS2jBxg3L5y1pSYwgkOE/Q0iBRG91PueSq0c06mSuKp8COI0xG =VCYI -----END PGP SIGNATURE----- Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: "Two patches from Michael and Dexuan to fix vmbus hanging issues" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload Drivers: hv: vmbus: hibernation: do not hang forever in vmbus_bus_resume() |
|
David Ahern | 2fbc6e89b2 |
ipv4: Update exception handling for multipath routes via same device
Kfir reported that pmtu exceptions are not created properly for
deployments where multipath routes use the same device.
After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after*
the route lookup. This is the second use case where this has
been a problem (the first is related to use of vti devices with
VRF). I can not find any reason for the oif to be changed after the
lookup; the code goes back to the start of git. It does not seem
logical so remove it.
2. fib_lookups for exceptions do not call fib_select_path to handle
multipath route selection based on the hash.
The end result is that the fib_lookup used to add the exception
always creates it based using the first leg of the route.
An example topology showing the problem:
| host1
+------+
| eth0 | .209
+------+
|
+------+
switch | br0 |
+------+
|
+---------+---------+
| host2 | host3
+------+ +------+
| eth0 | .250 | eth0 | 192.168.252.252
+------+ +------+
+-----+ +-----+
| vti | .2 | vti | 192.168.247.3
+-----+ +-----+
\ /
=================================
tunnels
192.168.247.1/24
for h in host1 host2 host3; do
ip netns add ${h}
ip -netns ${h} link set lo up
ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1
done
ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up
for n in 1 2 3; do
ip -netns switch link add eth-sw type veth peer name eth-h${n}
ip -netns switch li set eth-h${n} master br0 up
ip -netns switch li set eth-sw netns host${n} name eth0
done
ip -netns host1 addr add 192.168.252.209/24 dev eth0
ip -netns host1 link set dev eth0 up
ip -netns host1 route add 192.168.247.0/24 \
nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0
ip -netns host2 addr add 192.168.252.250/24 dev eth0
ip -netns host2 link set dev eth0 up
ip -netns host2 addr add 192.168.252.252/24 dev eth0
ip -netns host3 link set dev eth0 up
ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do
ip -netns tunnel addr add dev br0 192.168.247.${n}/24
done
for n in 2 3
do
ip -netns tunnel link add vti${n} type veth peer name eth${n}
ip -netns tunnel link set eth${n} mtu 1360 master br0 up
ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24
done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15
ip -netns host1 ro ls cache
Before this patch the cache always shows exceptions against the first
leg in the multipath route; 192.168.252.250 per this example. Since the
hash has an initial random seed, you may need to vary the final octet
more than what is listed. In my tests, using addresses between 11 and 19
usually found 1 that used both legs.
With this patch, the cache will have exceptions for both legs.
Fixes:
|
|
Michel Dänzer | 2f228aab21 |
drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is
Don't check drm_crtc_state::active for this either, per its documentation in include/drm/drm_crtc.h: * Hence drivers must not consult @active in their various * &drm_mode_config_funcs.atomic_check callback to reject an atomic * commit. atomic_remove_fb disables the CRTC as needed for disabling the primary plane. This prevents at least the following problems if the primary plane gets disabled (e.g. due to destroying the FB assigned to the primary plane, as happens e.g. with mutter in Wayland mode): * The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID (which enables the cursor plane). * If the cursor plane was enabled, changing the legacy DPMS property value from off to on returned EINVAL. v2: * Minor changes to code comment and commit log, per review feedback. GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344 Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
Christian König | 40eab0f895 |
drm/radeon: revert "Prefer lower feedback dividers"
Turns out this breaks a lot of different hardware.
This reverts commit
|
|
Andrey Grodzovsky | 5367eb6d8a |
drm/amdgpu: Include sienna_cichlid in USBC PD FW support.
Create sysfs interface also for sienna_cichlid. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
Jun Lei | c4790a8894 |
drm/amd/display: update nv1x stutter latencies
[why] Recent characterization shows increased stutter latencies on some SKUs, leading to underflow. [how] Update SOC params to account for this worst case latency. Signed-off-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
Bhawanpreet Lakha | 4cdd7b332e |
drm/amd/display: Don't use DRM_ERROR() for DTM add topology
[Why] Previously we were only calling add_topology when hdcp was being enabled. Now we call add_topology by default so the ERROR messages are printed if the firmware is not loaded. This error message is not relevant for normal display functionality so no need to print a ERROR message. [How] Change DRM_ERROR to DRM_INFO Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
Jiansong Chen | cc8e66e769 |
drm/amd/pm: support runtime pptable update for sienna_cichlid etc.
This avoids smu issue when enabling runtime pptable update for sienna_cichlid and so on. Runtime pptable udpate is needed for test and debug purpose. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
Dennis Li | 087d764159 |
drm/amdkfd: fix a memory leak issue
In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
Dennis Li | 66a5710bea |
drm/kfd: fix a system crash issue during GPU recovery
The crash log as the below: [Thu Aug 20 23:18:14 2020] general protection fault: 0000 [#1] SMP NOPTI [Thu Aug 20 23:18:14 2020] CPU: 152 PID: 1837 Comm: kworker/152:1 Tainted: G OE 5.4.0-42-generic #46~18.04.1-Ubuntu [Thu Aug 20 23:18:14 2020] Hardware name: GIGABYTE G482-Z53-YF/MZ52-G40-00, BIOS R12 05/13/2020 [Thu Aug 20 23:18:14 2020] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [Thu Aug 20 23:18:14 2020] RIP: 0010:evict_process_queues_cpsch+0xc9/0x130 [amdgpu] [Thu Aug 20 23:18:14 2020] Code: 49 8d 4d 10 48 39 c8 75 21 eb 44 83 fa 03 74 36 80 78 72 00 74 0c 83 ab 68 01 00 00 01 41 c6 45 41 00 48 8b 00 48 39 c8 74 25 <80> 78 70 00 c6 40 6d 01 74 ee 8b 50 28 c6 40 70 00 83 ab 60 01 00 [Thu Aug 20 23:18:14 2020] RSP: 0018:ffffb29b52f6fc90 EFLAGS: 00010213 [Thu Aug 20 23:18:14 2020] RAX: 1c884edb0a118914 RBX: ffff8a0d45ff3c00 RCX: ffff8a2d83e41038 [Thu Aug 20 23:18:14 2020] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8a0e2e4178c0 [Thu Aug 20 23:18:14 2020] RBP: ffffb29b52f6fcb0 R08: 0000000000001b64 R09: 0000000000000004 [Thu Aug 20 23:18:14 2020] R10: ffffb29b52f6fb78 R11: 0000000000000001 R12: ffff8a0d45ff3d28 [Thu Aug 20 23:18:14 2020] R13: ffff8a2d83e41028 R14: 0000000000000000 R15: 0000000000000000 [Thu Aug 20 23:18:14 2020] FS: 0000000000000000(0000) GS:ffff8a0e2e400000(0000) knlGS:0000000000000000 [Thu Aug 20 23:18:14 2020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Thu Aug 20 23:18:14 2020] CR2: 000055c783c0e6a8 CR3: 00000034a1284000 CR4: 0000000000340ee0 [Thu Aug 20 23:18:14 2020] Call Trace: [Thu Aug 20 23:18:14 2020] kfd_process_evict_queues+0x43/0xd0 [amdgpu] [Thu Aug 20 23:18:14 2020] kfd_suspend_all_processes+0x60/0xf0 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_suspend.part.7+0x43/0x50 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_pre_reset+0x46/0x60 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_amdkfd_pre_reset+0x1a/0x20 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_device_gpu_recover+0x377/0xf90 [amdgpu] [Thu Aug 20 23:18:14 2020] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [Thu Aug 20 23:18:14 2020] process_one_work+0x20f/0x400 [Thu Aug 20 23:18:14 2020] worker_thread+0x34/0x410 When GPU hang, user process will fail to create a compute queue whose struct object will be freed later, but driver wrongly add this queue to queue list of the proccess. And then kfd_process_evict_queues will access a freed memory, which cause a system crash. v2: The failure to execute_queues should probably not be reported to the caller of create_queue, because the queue was already created. Therefore change to ignore the return value from execute_queues. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
|
Lu Wei | 2e5117ba9f |
net: tipc: kerneldoc fixes
Fix parameter description of tipc_link_bc_create()
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
|
|
Dany Madden | d3f2ef1887 |
ibmvnic: update MAINTAINERS
Update supporters for IBM Power SRIOV Virtual NIC Device Driver. Thomas Falcon is moving on to other works. Dany Madden, Lijun Pan and Sukadev Bhattiprolu are the current supporters. Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
Ard Biesheuvel | 46908326c6 |
efi: efibc: check for efivars write capability
Branden reports that commit |
|
Namhyung Kim | d26383dcb2 |
perf test: Free formats for perf pmu parse test
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes:
|
|
Namhyung Kim | 6f47ed6cd1 |
perf metric: Do not free metric when failed to resolve
It's dangerous to free the original metric when it's called from
resolve_metric() as it's already in the metric_list and might have other
resources too. Instead, it'd better let them bail out and be released
properly at the later stage.
So add a check when it's called from metricgroup__add_metric() and
release it. Also make sure that mp is set properly.
Fixes:
|
|
Namhyung Kim | 27adafcda3 |
perf metric: Free metric when it failed to resolve
The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail. Also it can fail in the middle like in
resolve_metric() even for single metric.
In those cases, the intermediate list and ids will be leaked like:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
#2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
#3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
#4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
#5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes:
|
|
Namhyung Kim | 437822bf38 |
perf metric: Release expr_parse_ctx after testing
The test_generic_metric() missed to release entries in the pctx. Asan
reported following leak (and more):
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
#2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
#3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
#4 0x55f7e7341667 in expr__add_ref util/expr.c:120
#5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes:
|