Commit Graph

8 Commits

Author SHA1 Message Date
Ard Biesheuvel f4f75ad574 efi: efistub: Convert into static library
This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.

The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.

In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-18 21:22:19 +01:00
Ard Biesheuvel 022ee6c558 efi/x86: Move UEFI Runtime Services wrappers to generic code
In order for other archs (such as arm64) to be able to reuse the virtual
mode function call wrappers, move them to drivers/firmware/efi/runtime-wrappers.c.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-07 20:12:53 +01:00
Mark Salter 0302f71c0a efi: add helper function to get UEFI params from FDT
ARM and ARM64 architectures use the device tree to pass UEFI parameters
from stub to kernel. These parameters are things known to the stub but
not discoverable by the kernel after the stub calls ExitBootSerives().
There is a helper function in:

   drivers/firmware/efi/fdt.c

which the stub uses to add the UEFI parameters to the device tree.
This patch adds a complimentary helper function which UEFI runtime
support may use to retrieve the parameters from the device tree.
If an architecture wants to use this helper, it should select
CONFIG_EFI_PARAMS_FROM_FDT.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-30 19:49:46 +01:00
Ingo Molnar ef0b8b9a52 Linux 3.13-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJSyJVbAAoJEHm+PkMAQRiGa28H/0m7GpZSpT8mvBthITxzqWCq
 JRkSPS4KTurAWlA5CJMJePyCM30DgN90s06bYUen9sTecZUwnL+qSV5OqAmg2r+0
 PrfwtXtGZR6/Y12XlZ/3oFxVfUxjmgJyDAS76TIH1IvIum52nvJmLrR+6AyVphIX
 DkgBOuapdA7lia+U+ZM1cRkeHxUOKTUEw9v611VgoN3LYZyzyRb6d0rB7JtZN1RV
 dnXRi27enaPhwxelsCnORioRjsByMwD40CERxfLHmr5CGhmvCehBjO6bJ+KAdp14
 52bfwWcNdbFMzUobcR7qlfS3Hy3AYJci+P6JzeeZ+kWEdv/eh5/1lvNuXtBJRlc=
 =iwzJ
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc7' into x86/efi-kexec to resolve conflicts

Conflicts:
	arch/x86/platform/efi/efi.c
	drivers/firmware/efi/Kconfig

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-05 12:34:29 +01:00
Dave Young 926172d460 efi: Export EFI runtime memory mapping to sysfs
kexec kernel will need exactly same mapping for EFI runtime memory
ranges. Thus here export the runtime ranges mapping to sysfs,
kexec-tools will assemble them and pass to 2nd kernel via setup_data.

Introducing a new directory /sys/firmware/efi/runtime-map just like
/sys/firmware/memmap. Containing below attribute in each file of that
directory:

attribute  num_pages  phys_addr  type  virt_addr

Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-12-21 15:29:36 +00:00
Jan Beulich fce7d3bfc0 x86/efi: Don't select EFI from certain special ACPI drivers
Commit 7ea6c6c1 ("Move cper.c from drivers/acpi/apei to
drivers/firmware/efi") results in CONFIG_EFI being enabled even
when the user doesn't want this. Since ACPI APEI used to build
fine without UEFI (and as far as I know also has no functional
depency on it), at least in that case using a reverse dependency
is wrong (and a straight one isn't needed).

Whether the same is true for ACPI_EXTLOG I don't know - if there
is a functional dependency, it should depend on EFI rather than
selecting it. It certainly has (currently) no build dependency.

Adjust Kconfig and build logic so that the bad dependency gets
avoided.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/52AF1EBC020000780010DBF9@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-19 21:32:46 +01:00
Luck, Tony 7ea6c6c15e Move cper.c from drivers/acpi/apei to drivers/firmware/efi
cper.c contains code to decode and print "Common Platform Error Records".
Originally added under drivers/acpi/apei because the only user was in that
same directory - but now we have another consumer, and we shouldn't have
to force CONFIG_ACPI_APEI get access to this code.

Since CPER is defined in the UEFI specification - the logical home for
this code is under drivers/firmware/efi/

Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-31 11:27:04 -07:00
Matt Fleming 048517722c efivars: Move pstore code into the new EFI directory
efivars.c has grown far too large and needs to be divided up. Create a
new directory and move the persistence storage code to efi-pstore.c now
that it uses the new efivar API. This helps us to greatly reduce the
size of efivars.c and paves the way for moving other code out of
efivars.c.

Note that because CONFIG_EFI_VARS can be built as a module efi-pstore
must also include support for building as a module.

Reviewed-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-17 13:24:01 +01:00