Commit Graph

6 Commits

Author SHA1 Message Date
Thomas Gleixner da607e1969 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345
Based on 1 normalized pattern(s):

  licensed under the terms of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 88 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:08 +02:00
Takashi Sakamoto 06ac0b6f8f ALSA: firewire-motu: add a flag for AES/EBU on XLR interface
MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:50 +02:00
Takashi Sakamoto 81720c6d49 ALSA: firewire-motu: add a flag for chunks for main 1/2 out
This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.

This commit adds a flag for the separated main data chunk.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:47 +02:00
Takashi Sakamoto 8b460c76bd ALSA: firewire-motu: add specification flag for position of flag for MIDI messages
In protocols of MOTU FireWire series, when transferring MIDI messages,
transmitter set existence flag to one byte on first several quadlets. The
position differs depending on protocols and models, however two cases are
confirmed; in 5th byte and 8th byte from MSB side.

This commit adds a series of specification flag to describe them. When
the existence flag is in the 5th byte, SND_MOTU_SPEC_[R|T]X_MIDI_2ND_Q is
used. Else, another set of the flag is used. Here, '_Q' means quadlet.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-21 12:24:00 +02:00
Takashi Sakamoto 5b33504bad ALSA: firewire-motu: remove invalid bitshift for register value
In protocol version 3, drivers can read current sampling clock status from
register 0x'ffff'f000'0b14. 8 bits of LSB of this register represents type
of signal as source of clock.

Current driver code includes invalid bitshift to handle the parameter. This
commit fixes the bug.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 5992e30034 ("ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:36:11 +02:00
Takashi Sakamoto 5992e30034 ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3
MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire
series, produced in 2008/2014. This model consists of three chips for
functionality on IEEE 1394 bus:

 * TI TSB41AB2 (Physical layer for IEEE 1394 bus)
 * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet
   processing and data block processing layer)
 * TI TMS320C6722 (Digital signal processing)

This commit adds a support for this model, with its unique protocol as
version 3. This protocol has some additional features to protocol
version 2.

 * Support several optical interfaces.
 * Support a data chunk for return of reverb effect.
 * Have a quirk of tx packets.
 * Support heartbeat asynchronous transaction.

In this protocol, series of transferred packets has some quirks. Below
fields in CIP headers of the packets are out of IEC 61883-1:
 - SID (source node id): always 0x0d
 - DBS (data block size): always 0x04
 - DBC (data block counter): always 0x00
 - EOH (End of header): always 0x00

Below is an actual sample of transferred packets.

quads CIP1       CIP2
520   0x0D040400 0x22FFFFFF
  8   0x0D040400 0x22FFFFFF
520   0x0D040400 0x22FFFFFF
520   0x0D040400 0x22FFFFFF
  8   0x0D040400 0x22FFFFFF

Status of clock is configured by write transactions to 0x'ffff'f000'0b14,
as well as version 2, while meanings of fields are different from the
former protocols. Modes of optical interfaces are configured by write
transactions to 0x'ffff'f000'0c94.

Drivers can register its address to receive heatbeat transactions from the
unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is
for the lower part. Nevertheless, this feature is not useless for this
driver and this commit omits it.

Each data block consists of two parts in a point of the number of included
data chunks. In both of 'fixed' and 'differed' parts, the number of
included data blocks are a multiple of 4, thus depending on models there's
some empty data chunks. For example, 828mk3 includes one pair of empty
data chunks in its fixed part. When optical interface is configured to
S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part.
To reduce consumption of CPU cycles with additional conditions/loops, this
commit just exposes these empty chunks to user space as PCM channels.

Additionally, 828mk3 has a non-negligible overhead to change its sampling
transfer frequency. When softwares send asynchronous transaction to
perform it, LED on the unit starts to blink. In a worst case, it continues
blink during several seconds; e.g. 10 seconds. When stopping blinking,
the unit seems to be prepared for the requested sampling transfer
frequency. To wait for the preparation, this commit forces the driver
to call task scheduler and applications sleeps for 4 seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:13 +02:00