/* tmp401.c * * Copyright (C) 2007,2008 Hans de Goede * Preliminary tmp411 support by: * Gabriel Konat, Sander Leget, Wouter Willems * Copyright (C) 2009 Andre Prendel * * Cleanup and support for TMP431 and TMP432 by Guenter Roeck * Copyright (c) 2013 Guenter Roeck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC. * * Note this IC is in some aspect similar to the LM90, but it has quite a * few differences too, for example the local temp has a higher resolution * and thus has 16 bits registers for its value and limit instead of 8 bits. */ #include #include #include #include #include #include #include #include #include #include #include /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 }; /* * The TMP401 registers, note some registers have different addresses for * reading and writing */ #define TMP401_STATUS 0x02 #define TMP401_CONFIG_READ 0x03 #define TMP401_CONFIG_WRITE 0x09 #define TMP401_CONVERSION_RATE_READ 0x04 #define TMP401_CONVERSION_RATE_WRITE 0x0A #define TMP401_TEMP_CRIT_HYST 0x21 #define TMP401_MANUFACTURER_ID_REG 0xFE #define TMP401_DEVICE_ID_REG 0xFF static const u8 TMP401_TEMP_MSB_READ[6][2] = { { 0x00, 0x01 }, /* temp */ { 0x06, 0x08 }, /* low limit */ { 0x05, 0x07 }, /* high limit */ { 0x20, 0x19 }, /* therm (crit) limit */ { 0x30, 0x34 }, /* lowest */ { 0x32, 0x36 }, /* highest */ }; static const u8 TMP401_TEMP_MSB_WRITE[6][2] = { { 0, 0 }, /* temp (unused) */ { 0x0C, 0x0E }, /* low limit */ { 0x0B, 0x0D }, /* high limit */ { 0x20, 0x19 }, /* therm (crit) limit */ { 0x30, 0x34 }, /* lowest */ { 0x32, 0x36 }, /* highest */ }; static const u8 TMP401_TEMP_LSB[6][2] = { { 0x15, 0x10 }, /* temp */ { 0x17, 0x14 }, /* low limit */ { 0x16, 0x13 }, /* high limit */ { 0, 0 }, /* therm (crit) limit (unused) */ { 0x31, 0x35 }, /* lowest */ { 0x33, 0x37 }, /* highest */ }; static const u8 TMP432_TEMP_MSB_READ[4][3] = { { 0x00, 0x01, 0x23 }, /* temp */ { 0x06, 0x08, 0x16 }, /* low limit */ { 0x05, 0x07, 0x15 }, /* high limit */ { 0x20, 0x19, 0x1A }, /* therm (crit) limit */ }; static const u8 TMP432_TEMP_MSB_WRITE[4][3] = { { 0, 0, 0 }, /* temp - unused */ { 0x0C, 0x0E, 0x16 }, /* low limit */ { 0x0B, 0x0D, 0x15 }, /* high limit */ { 0x20, 0x19, 0x1A }, /* therm (crit) limit */ }; static const u8 TMP432_TEMP_LSB[3][3] = { { 0x29, 0x10, 0x24 }, /* temp */ { 0x3E, 0x14, 0x18 }, /* low limit */ { 0x3D, 0x13, 0x17 }, /* high limit */ }; /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */ static const u8 TMP432_STATUS_REG[] = { 0x1b, 0x36, 0x35, 0x37 }; /* Flags */ #define TMP401_CONFIG_RANGE BIT(2) #define TMP401_CONFIG_SHUTDOWN BIT(6) #define TMP401_STATUS_LOCAL_CRIT BIT(0) #define TMP401_STATUS_REMOTE_CRIT BIT(1) #define TMP401_STATUS_REMOTE_OPEN BIT(2) #define TMP401_STATUS_REMOTE_LOW BIT(3) #define TMP401_STATUS_REMOTE_HIGH BIT(4) #define TMP401_STATUS_LOCAL_LOW BIT(5) #define TMP401_STATUS_LOCAL_HIGH BIT(6) /* On TMP432, each status has its own register */ #define TMP432_STATUS_LOCAL BIT(0) #define TMP432_STATUS_REMOTE1 BIT(1) #define TMP432_STATUS_REMOTE2 BIT(2) /* Manufacturer / Device ID's */ #define TMP401_MANUFACTURER_ID 0x55 #define TMP401_DEVICE_ID 0x11 #define TMP411A_DEVICE_ID 0x12 #define TMP411B_DEVICE_ID 0x13 #define TMP411C_DEVICE_ID 0x10 #define TMP431_DEVICE_ID 0x31 #define TMP432_DEVICE_ID 0x32 #define TMP435_DEVICE_ID 0x35 /* * Driver data (common to all clients) */ static const struct i2c_device_id tmp401_id[] = { { "tmp401", tmp401 }, { "tmp411", tmp411 }, { "tmp431", tmp431 }, { "tmp432", tmp432 }, { "tmp435", tmp435 }, { } }; MODULE_DEVICE_TABLE(i2c, tmp401_id); /* * Client data (each client gets its own) */ struct tmp401_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ enum chips kind; unsigned int update_interval; /* in milliseconds */ /* register values */ u8 status[4]; u8 config; u16 temp[6][3]; u8 temp_crit_hyst; }; /* * Sysfs attr show / store functions */ static int tmp401_register_to_temp(u16 reg, u8 config) { int temp = reg; if (config & TMP401_CONFIG_RANGE) temp -= 64 * 256; return DIV_ROUND_CLOSEST(temp * 125, 32); } static u16 tmp401_temp_to_register(long temp, u8 config, int zbits) { if (config & TMP401_CONFIG_RANGE) { temp = clamp_val(temp, -64000, 191000); temp += 64000; } else temp = clamp_val(temp, 0, 127000); return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits; } static int tmp401_update_device_reg16(struct i2c_client *client, struct tmp401_data *data) { int i, j, val; int num_regs = data->kind == tmp411 ? 6 : 4; int num_sensors = data->kind == tmp432 ? 3 : 2; for (i = 0; i < num_sensors; i++) { /* local / r1 / r2 */ for (j = 0; j < num_regs; j++) { /* temp / low / ... */ u8 regaddr; /* * High byte must be read first immediately followed * by the low byte */ regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_READ[j][i] : TMP401_TEMP_MSB_READ[j][i]; val = i2c_smbus_read_byte_data(client, regaddr); if (val < 0) return val; data->temp[j][i] = val << 8; if (j == 3) /* crit is msb only */ continue; regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i] : TMP401_TEMP_LSB[j][i]; val = i2c_smbus_read_byte_data(client, regaddr); if (val < 0) return val; data->temp[j][i] |= val; } } return 0; } static struct tmp401_data *tmp401_update_device(struct device *dev) { struct tmp401_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; struct tmp401_data *ret = data; int i, val; unsigned long next_update; mutex_lock(&data->update_lock); next_update = data->last_updated + msecs_to_jiffies(data->update_interval); if (time_after(jiffies, next_update) || !data->valid) { if (data->kind != tmp432) { /* * The driver uses the TMP432 status format internally. * Convert status to TMP432 format for other chips. */ val = i2c_smbus_read_byte_data(client, TMP401_STATUS); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->status[0] = (val & TMP401_STATUS_REMOTE_OPEN) >> 1; data->status[1] = ((val & TMP401_STATUS_REMOTE_LOW) >> 2) | ((val & TMP401_STATUS_LOCAL_LOW) >> 5); data->status[2] = ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) | ((val & TMP401_STATUS_LOCAL_HIGH) >> 6); data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT | TMP401_STATUS_REMOTE_CRIT); } else { for (i = 0; i < ARRAY_SIZE(data->status); i++) { val = i2c_smbus_read_byte_data(client, TMP432_STATUS_REG[i]); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->status[i] = val; } } val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->config = val; val = tmp401_update_device_reg16(client, data); if (val < 0) { ret = ERR_PTR(val); goto abort; } val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->temp_crit_hyst = val; data->last_updated = jiffies; data->valid = 1; } abort: mutex_unlock(&data->update_lock); return ret; } static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr_2(devattr)->nr; int index = to_sensor_dev_attr_2(devattr)->index; struct tmp401_data *data = tmp401_update_device(dev); if (IS_ERR(data)) return PTR_ERR(data); return sprintf(buf, "%d\n", tmp401_register_to_temp(data->temp[nr][index], data->config)); } static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute *devattr, char *buf) { int temp, index = to_sensor_dev_attr(devattr)->index; struct tmp401_data *data = tmp401_update_device(dev); if (IS_ERR(data)) return PTR_ERR(data); mutex_lock(&data->update_lock); temp = tmp401_register_to_temp(data->temp[3][index], data->config); temp -= data->temp_crit_hyst * 1000; mutex_unlock(&data->update_lock); return sprintf(buf, "%d\n", temp); } static ssize_t show_status(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr_2(devattr)->nr; int mask = to_sensor_dev_attr_2(devattr)->index; struct tmp401_data *data = tmp401_update_device(dev); if (IS_ERR(data)) return PTR_ERR(data); return sprintf(buf, "%d\n", !!(data->status[nr] & mask)); } static ssize_t store_temp(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int nr = to_sensor_dev_attr_2(devattr)->nr; int index = to_sensor_dev_attr_2(devattr)->index; struct tmp401_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long val; u16 reg; u8 regaddr; if (kstrtol(buf, 10, &val)) return -EINVAL; reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4); mutex_lock(&data->update_lock); regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index] : TMP401_TEMP_MSB_WRITE[nr][index]; i2c_smbus_write_byte_data(client, regaddr, reg >> 8); if (nr != 3) { regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index] : TMP401_TEMP_LSB[nr][index]; i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF); } data->temp[nr][index] = reg; mutex_unlock(&data->update_lock); return count; } static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { int temp, index = to_sensor_dev_attr(devattr)->index; struct tmp401_data *data = tmp401_update_device(dev); long val; u8 reg; if (IS_ERR(data)) return PTR_ERR(data); if (kstrtol(buf, 10, &val)) return -EINVAL; if (data->config & TMP401_CONFIG_RANGE) val = clamp_val(val, -64000, 191000); else val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); temp = tmp401_register_to_temp(data->temp[3][index], data->config); val = clamp_val(val, temp - 255000, temp); reg = ((temp - val) + 500) / 1000; i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST, reg); data->temp_crit_hyst = reg; mutex_unlock(&data->update_lock); return count; } /* * Resets the historical measurements of minimum and maximum temperatures. * This is done by writing any value to any of the minimum/maximum registers * (0x30-0x37). */ static ssize_t reset_temp_history(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct tmp401_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long val; if (kstrtol(buf, 10, &val)) return -EINVAL; if (val != 1) { dev_err(dev, "temp_reset_history value %ld not supported. Use 1 to reset the history!\n", val); return -EINVAL; } mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val); data->valid = 0; mutex_unlock(&data->update_lock); return count; } static ssize_t show_update_interval(struct device *dev, struct device_attribute *attr, char *buf) { struct tmp401_data *data = dev_get_drvdata(dev); return sprintf(buf, "%u\n", data->update_interval); } static ssize_t set_update_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct tmp401_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; unsigned long val; int err, rate; err = kstrtoul(buf, 10, &val); if (err) return err; /* * For valid rates, interval can be calculated as * interval = (1 << (7 - rate)) * 125; * Rounded rate is therefore * rate = 7 - __fls(interval * 4 / (125 * 3)); * Use clamp_val() to avoid overflows, and to ensure valid input * for __fls. */ val = clamp_val(val, 125, 16000); rate = 7 - __fls(val * 4 / (125 * 3)); mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate); data->update_interval = (1 << (7 - rate)) * 125; mutex_unlock(&data->update_lock); return count; } static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0); static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp, store_temp, 1, 0); static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp, store_temp, 2, 0); static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp, store_temp, 3, 0); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_crit_hyst, store_temp_crit_hyst, 0); static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL, 1, TMP432_STATUS_LOCAL); static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL, 2, TMP432_STATUS_LOCAL); static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL, 3, TMP432_STATUS_LOCAL); static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1); static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp, store_temp, 1, 1); static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp, store_temp, 2, 1); static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp, store_temp, 3, 1); static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1); static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL, 0, TMP432_STATUS_REMOTE1); static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL, 1, TMP432_STATUS_REMOTE1); static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL, 2, TMP432_STATUS_REMOTE1); static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL, 3, TMP432_STATUS_REMOTE1); static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval, set_update_interval); static struct attribute *tmp401_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &dev_attr_update_interval.attr, NULL }; static const struct attribute_group tmp401_group = { .attrs = tmp401_attributes, }; /* * Additional features of the TMP411 chip. * The TMP411 stores the minimum and maximum * temperature measured since power-on, chip-reset, or * minimum and maximum register reset for both the local * and remote channels. */ static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0); static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0); static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1); static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1); static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history, 0); static struct attribute *tmp411_attributes[] = { &sensor_dev_attr_temp1_highest.dev_attr.attr, &sensor_dev_attr_temp1_lowest.dev_attr.attr, &sensor_dev_attr_temp2_highest.dev_attr.attr, &sensor_dev_attr_temp2_lowest.dev_attr.attr, &sensor_dev_attr_temp_reset_history.dev_attr.attr, NULL }; static const struct attribute_group tmp411_group = { .attrs = tmp411_attributes, }; static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2); static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp, store_temp, 1, 2); static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp, store_temp, 2, 2); static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp, store_temp, 3, 2); static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 2); static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL, 0, TMP432_STATUS_REMOTE2); static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL, 1, TMP432_STATUS_REMOTE2); static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL, 2, TMP432_STATUS_REMOTE2); static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL, 3, TMP432_STATUS_REMOTE2); static struct attribute *tmp432_attributes[] = { &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, NULL }; static const struct attribute_group tmp432_group = { .attrs = tmp432_attributes, }; /* * Begin non sysfs callback code (aka Real code) */ static void tmp401_init_client(struct tmp401_data *data, struct i2c_client *client) { int config, config_orig; /* Set the conversion rate to 2 Hz */ i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5); data->update_interval = 500; /* Start conversions (disable shutdown if necessary) */ config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); if (config < 0) { dev_warn(&client->dev, "Initialization failed!\n"); return; } config_orig = config; config &= ~TMP401_CONFIG_SHUTDOWN; if (config != config_orig) i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config); } static int tmp401_detect(struct i2c_client *client, struct i2c_board_info *info) { enum chips kind; struct i2c_adapter *adapter = client->adapter; u8 reg; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; /* Detect and identify the chip */ reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG); if (reg != TMP401_MANUFACTURER_ID) return -ENODEV; reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG); switch (reg) { case TMP401_DEVICE_ID: if (client->addr != 0x4c) return -ENODEV; kind = tmp401; break; case TMP411A_DEVICE_ID: if (client->addr != 0x4c) return -ENODEV; kind = tmp411; break; case TMP411B_DEVICE_ID: if (client->addr != 0x4d) return -ENODEV; kind = tmp411; break; case TMP411C_DEVICE_ID: if (client->addr != 0x4e) return -ENODEV; kind = tmp411; break; case TMP431_DEVICE_ID: if (client->addr == 0x4e) return -ENODEV; kind = tmp431; break; case TMP432_DEVICE_ID: if (client->addr == 0x4e) return -ENODEV; kind = tmp432; break; case TMP435_DEVICE_ID: if (client->addr != 0x4c) return -ENODEV; kind = tmp435; break; default: return -ENODEV; } reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); if (reg & 0x1b) return -ENODEV; reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ); /* Datasheet says: 0x1-0x6 */ if (reg > 15) return -ENODEV; strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE); return 0; } static int tmp401_probe(struct i2c_client *client, const struct i2c_device_id *id) { static const char * const names[] = { "TMP401", "TMP411", "TMP431", "TMP432", "TMP435" }; struct device *dev = &client->dev; struct device *hwmon_dev; struct tmp401_data *data; int groups = 0; data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL); if (!data) return -ENOMEM; data->client = client; mutex_init(&data->update_lock); data->kind = id->driver_data; /* Initialize the TMP401 chip */ tmp401_init_client(data, client); /* Register sysfs hooks */ data->groups[groups++] = &tmp401_group; /* Register additional tmp411 sysfs hooks */ if (data->kind == tmp411) data->groups[groups++] = &tmp411_group; /* Register additional tmp432 sysfs hooks */ if (data->kind == tmp432) data->groups[groups++] = &tmp432_group; hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, data->groups); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); dev_info(dev, "Detected TI %s chip\n", names[data->kind]); return 0; } static struct i2c_driver tmp401_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "tmp401", }, .probe = tmp401_probe, .id_table = tmp401_id, .detect = tmp401_detect, .address_list = normal_i2c, }; module_i2c_driver(tmp401_driver); MODULE_AUTHOR("Hans de Goede "); MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver"); MODULE_LICENSE("GPL");