/* * Texas Instruments DSPS platforms "glue layer" * * Copyright (C) 2012, by Texas Instruments * * Based on the am35x "glue layer" code. * * This file is part of the Inventra Controller Driver for Linux. * * The Inventra Controller Driver for Linux is free software; you * can redistribute it and/or modify it under the terms of the GNU * General Public License version 2 as published by the Free Software * Foundation. * * The Inventra Controller Driver for Linux is distributed in * the hope that it will be useful, but WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public * License for more details. * * You should have received a copy of the GNU General Public License * along with The Inventra Controller Driver for Linux ; if not, * write to the Free Software Foundation, Inc., 59 Temple Place, * Suite 330, Boston, MA 02111-1307 USA * * musb_dsps.c will be a common file for all the TI DSPS platforms * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x. * For now only ti81x is using this and in future davinci.c, am35x.c * da8xx.c would be merged to this file after testing. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "musb_core.h" static const struct of_device_id musb_dsps_of_match[]; /** * avoid using musb_readx()/musb_writex() as glue layer should not be * dependent on musb core layer symbols. */ static inline u8 dsps_readb(const void __iomem *addr, unsigned offset) { return __raw_readb(addr + offset); } static inline u32 dsps_readl(const void __iomem *addr, unsigned offset) { return __raw_readl(addr + offset); } static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data) { __raw_writeb(data, addr + offset); } static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data) { __raw_writel(data, addr + offset); } /** * DSPS musb wrapper register offset. * FIXME: This should be expanded to have all the wrapper registers from TI DSPS * musb ips. */ struct dsps_musb_wrapper { u16 revision; u16 control; u16 status; u16 epintr_set; u16 epintr_clear; u16 epintr_status; u16 coreintr_set; u16 coreintr_clear; u16 coreintr_status; u16 phy_utmi; u16 mode; u16 tx_mode; u16 rx_mode; /* bit positions for control */ unsigned reset:5; /* bit positions for interrupt */ unsigned usb_shift:5; u32 usb_mask; u32 usb_bitmap; unsigned drvvbus:5; unsigned txep_shift:5; u32 txep_mask; u32 txep_bitmap; unsigned rxep_shift:5; u32 rxep_mask; u32 rxep_bitmap; /* bit positions for phy_utmi */ unsigned otg_disable:5; /* bit positions for mode */ unsigned iddig:5; unsigned iddig_mux:5; /* miscellaneous stuff */ u8 poll_seconds; }; /* * register shadow for suspend */ struct dsps_context { u32 control; u32 epintr; u32 coreintr; u32 phy_utmi; u32 mode; u32 tx_mode; u32 rx_mode; }; /** * DSPS glue structure. */ struct dsps_glue { struct device *dev; struct platform_device *musb; /* child musb pdev */ const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ struct timer_list timer; /* otg_workaround timer */ unsigned long last_timer; /* last timer data for each instance */ struct dsps_context context; }; static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); /* Never idle if active, or when VBUS timeout is not set as host */ if (musb->is_active || (musb->a_wait_bcon == 0 && musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", usb_otg_state_string(musb->xceiv->state)); del_timer(&glue->timer); glue->last_timer = jiffies; return; } if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) return; if (!musb->g.dev.driver) return; if (time_after(glue->last_timer, timeout) && timer_pending(&glue->timer)) { dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n"); return; } glue->last_timer = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", usb_otg_state_string(musb->xceiv->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&glue->timer, timeout); } /** * dsps_musb_enable - enable interrupts */ static void dsps_musb_enable(struct musb *musb) { struct device *dev = musb->controller; struct platform_device *pdev = to_platform_device(dev->parent); struct dsps_glue *glue = platform_get_drvdata(pdev); const struct dsps_musb_wrapper *wrp = glue->wrp; void __iomem *reg_base = musb->ctrl_base; u32 epmask, coremask; /* Workaround: setup IRQs through both register sets. */ epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) | ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift); coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF); dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ dsps_writel(reg_base, wrp->coreintr_set, (1 << wrp->drvvbus) << wrp->usb_shift); dsps_musb_try_idle(musb, 0); } /** * dsps_musb_disable - disable HDRC and flush interrupts */ static void dsps_musb_disable(struct musb *musb) { struct device *dev = musb->controller; struct platform_device *pdev = to_platform_device(dev->parent); struct dsps_glue *glue = platform_get_drvdata(pdev); const struct dsps_musb_wrapper *wrp = glue->wrp; void __iomem *reg_base = musb->ctrl_base; dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap); dsps_writel(reg_base, wrp->epintr_clear, wrp->txep_bitmap | wrp->rxep_bitmap); dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); } static void otg_timer(unsigned long _musb) { struct musb *musb = (void *)_musb; void __iomem *mregs = musb->mregs; struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; u8 devctl; unsigned long flags; int skip_session = 0; /* * We poll because DSPS IP's won't expose several OTG-critical * status change events (from the transceiver) otherwise. */ devctl = dsps_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, usb_otg_state_string(musb->xceiv->state)); spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { case OTG_STATE_A_WAIT_BCON: dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); skip_session = 1; /* fall */ case OTG_STATE_A_IDLE: case OTG_STATE_B_IDLE: if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } else { musb->xceiv->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); break; case OTG_STATE_A_WAIT_VFALL: musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; dsps_writel(musb->ctrl_base, wrp->coreintr_set, MUSB_INTR_VBUSERROR << wrp->usb_shift); break; default: break; } spin_unlock_irqrestore(&musb->lock, flags); } static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; void __iomem *reg_base = musb->ctrl_base; struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; unsigned long flags; irqreturn_t ret = IRQ_NONE; u32 epintr, usbintr; spin_lock_irqsave(&musb->lock, flags); /* Get endpoint interrupts */ epintr = dsps_readl(reg_base, wrp->epintr_status); musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift; musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift; if (epintr) dsps_writel(reg_base, wrp->epintr_status, epintr); /* Get usb core interrupts */ usbintr = dsps_readl(reg_base, wrp->coreintr_status); if (!usbintr && !epintr) goto out; musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift; if (usbintr) dsps_writel(reg_base, wrp->coreintr_status, usbintr); dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n", usbintr, epintr); /* * DRVVBUS IRQs are the only proxy we have (a very poor one!) for * DSPS IP's missing ID change IRQ. We need an ID change IRQ to * switch appropriately between halves of the OTG state machine. * Managing DEVCTL.SESSION per Mentor docs requires that we know its * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { int drvvbus = dsps_readl(reg_base, wrp->status); void __iomem *mregs = musb->mregs; u8 devctl = dsps_readb(mregs, MUSB_DEVCTL); int err; err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed * to cope with device connect current spikes. This * means it's not uncommon for bus-powered devices * to get VBUS errors during enumeration. * * This is a workaround, but newer RTL from Mentor * seems to allow a better one: "re"-starting sessions * without waiting for VBUS to stop registering in * devctl. */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; del_timer(&glue->timer); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); musb->xceiv->otg->default_a = 0; musb->xceiv->state = OTG_STATE_B_IDLE; } /* NOTE: this must complete power-on within 100 ms. */ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", usb_otg_state_string(musb->xceiv->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; } if (musb->int_tx || musb->int_rx || musb->int_usb) ret |= musb_interrupt(musb); /* Poll for ID change in OTG port mode */ if (musb->xceiv->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); out: spin_unlock_irqrestore(&musb->lock, flags); return ret; } static int dsps_musb_init(struct musb *musb) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); struct platform_device *parent = to_platform_device(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; void __iomem *reg_base; struct resource *r; u32 rev, val; r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control"); if (!r) return -EINVAL; reg_base = devm_ioremap_resource(dev, r); if (IS_ERR(reg_base)) return PTR_ERR(reg_base); musb->ctrl_base = reg_base; /* NOP driver needs change if supporting dual instance */ musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0); if (IS_ERR(musb->xceiv)) return PTR_ERR(musb->xceiv); /* Returns zero if e.g. not clocked */ rev = dsps_readl(reg_base, wrp->revision); if (!rev) return -ENODEV; usb_phy_init(musb->xceiv); setup_timer(&glue->timer, otg_timer, (unsigned long) musb); /* Reset the musb */ dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); musb->isr = dsps_interrupt; /* reset the otgdisable bit, needed for host mode to work */ val = dsps_readl(reg_base, wrp->phy_utmi); val &= ~(1 << wrp->otg_disable); dsps_writel(musb->ctrl_base, wrp->phy_utmi, val); return 0; } static int dsps_musb_exit(struct musb *musb) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); del_timer_sync(&glue->timer); usb_phy_shutdown(musb->xceiv); return 0; } static int dsps_musb_set_mode(struct musb *musb, u8 mode) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; void __iomem *ctrl_base = musb->ctrl_base; void __iomem *base = musb->mregs; u32 reg; reg = dsps_readl(base, wrp->mode); switch (mode) { case MUSB_HOST: reg &= ~(1 << wrp->iddig); /* * if we're setting mode to host-only or device-only, we're * going to ignore whatever the PHY sends us and just force * ID pin status by SW */ reg |= (1 << wrp->iddig_mux); dsps_writel(base, wrp->mode, reg); dsps_writel(ctrl_base, wrp->phy_utmi, 0x02); break; case MUSB_PERIPHERAL: reg |= (1 << wrp->iddig); /* * if we're setting mode to host-only or device-only, we're * going to ignore whatever the PHY sends us and just force * ID pin status by SW */ reg |= (1 << wrp->iddig_mux); dsps_writel(base, wrp->mode, reg); break; case MUSB_OTG: dsps_writel(base, wrp->phy_utmi, 0x02); break; default: dev_err(glue->dev, "unsupported mode %d\n", mode); return -EINVAL; } return 0; } static struct musb_platform_ops dsps_ops = { .init = dsps_musb_init, .exit = dsps_musb_exit, .enable = dsps_musb_enable, .disable = dsps_musb_disable, .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, }; static u64 musb_dmamask = DMA_BIT_MASK(32); static int get_int_prop(struct device_node *dn, const char *s) { int ret; u32 val; ret = of_property_read_u32(dn, s, &val); if (ret) return 0; return val; } static int get_musb_port_mode(struct device *dev) { enum usb_dr_mode mode; mode = of_usb_get_dr_mode(dev->of_node); switch (mode) { case USB_DR_MODE_HOST: return MUSB_PORT_MODE_HOST; case USB_DR_MODE_PERIPHERAL: return MUSB_PORT_MODE_GADGET; case USB_DR_MODE_UNKNOWN: case USB_DR_MODE_OTG: default: return MUSB_PORT_MODE_DUAL_ROLE; } } static int dsps_create_musb_pdev(struct dsps_glue *glue, struct platform_device *parent) { struct musb_hdrc_platform_data pdata; struct resource resources[2]; struct resource *res; struct device *dev = &parent->dev; struct musb_hdrc_config *config; struct platform_device *musb; struct device_node *dn = parent->dev.of_node; int ret; memset(resources, 0, sizeof(resources)); res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc"); if (!res) { dev_err(dev, "failed to get memory.\n"); return -EINVAL; } resources[0] = *res; res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc"); if (!res) { dev_err(dev, "failed to get irq.\n"); return -EINVAL; } resources[1] = *res; /* allocate the child platform device */ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(dev, "failed to allocate musb device\n"); return -ENOMEM; } musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; musb->dev.of_node = of_node_get(dn); glue->musb = musb; ret = platform_device_add_resources(musb, resources, ARRAY_SIZE(resources)); if (ret) { dev_err(dev, "failed to add resources\n"); goto err; } config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL); if (!config) { dev_err(dev, "failed to allocate musb hdrc config\n"); ret = -ENOMEM; goto err; } pdata.config = config; pdata.platform_ops = &dsps_ops; config->num_eps = get_int_prop(dn, "mentor,num-eps"); config->ram_bits = get_int_prop(dn, "mentor,ram-bits"); config->host_port_deassert_reset_at_resume = 1; pdata.mode = get_musb_port_mode(dev); /* DT keeps this entry in mA, musb expects it as per USB spec */ pdata.power = get_int_prop(dn, "mentor,power") / 2; config->multipoint = of_property_read_bool(dn, "mentor,multipoint"); ret = platform_device_add_data(musb, &pdata, sizeof(pdata)); if (ret) { dev_err(dev, "failed to add platform_data\n"); goto err; } ret = platform_device_add(musb); if (ret) { dev_err(dev, "failed to register musb device\n"); goto err; } return 0; err: platform_device_put(musb); return ret; } static int dsps_probe(struct platform_device *pdev) { const struct of_device_id *match; const struct dsps_musb_wrapper *wrp; struct dsps_glue *glue; int ret; if (!strcmp(pdev->name, "musb-hdrc")) return -ENODEV; match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); if (!match) { dev_err(&pdev->dev, "fail to get matching of_match struct\n"); return -EINVAL; } wrp = match->data; /* allocate glue */ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&pdev->dev, "unable to allocate glue memory\n"); return -ENOMEM; } glue->dev = &pdev->dev; glue->wrp = wrp; platform_set_drvdata(pdev, glue); pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); goto err2; } ret = dsps_create_musb_pdev(glue, pdev); if (ret) goto err3; return 0; err3: pm_runtime_put(&pdev->dev); err2: pm_runtime_disable(&pdev->dev); return ret; } static int dsps_remove(struct platform_device *pdev) { struct dsps_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); /* disable usbss clocks */ pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; } static const struct dsps_musb_wrapper am33xx_driver_data = { .revision = 0x00, .control = 0x14, .status = 0x18, .epintr_set = 0x38, .epintr_clear = 0x40, .epintr_status = 0x30, .coreintr_set = 0x3c, .coreintr_clear = 0x44, .coreintr_status = 0x34, .phy_utmi = 0xe0, .mode = 0xe8, .tx_mode = 0x70, .rx_mode = 0x74, .reset = 0, .otg_disable = 21, .iddig = 8, .iddig_mux = 7, .usb_shift = 0, .usb_mask = 0x1ff, .usb_bitmap = (0x1ff << 0), .drvvbus = 8, .txep_shift = 0, .txep_mask = 0xffff, .txep_bitmap = (0xffff << 0), .rxep_shift = 16, .rxep_mask = 0xfffe, .rxep_bitmap = (0xfffe << 16), .poll_seconds = 2, }; static const struct of_device_id musb_dsps_of_match[] = { { .compatible = "ti,musb-am33xx", .data = (void *) &am33xx_driver_data, }, { }, }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); #ifdef CONFIG_PM static int dsps_suspend(struct device *dev) { struct dsps_glue *glue = dev_get_drvdata(dev); const struct dsps_musb_wrapper *wrp = glue->wrp; struct musb *musb = platform_get_drvdata(glue->musb); void __iomem *mbase = musb->ctrl_base; glue->context.control = dsps_readl(mbase, wrp->control); glue->context.epintr = dsps_readl(mbase, wrp->epintr_set); glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set); glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi); glue->context.mode = dsps_readl(mbase, wrp->mode); glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode); glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode); return 0; } static int dsps_resume(struct device *dev) { struct dsps_glue *glue = dev_get_drvdata(dev); const struct dsps_musb_wrapper *wrp = glue->wrp; struct musb *musb = platform_get_drvdata(glue->musb); void __iomem *mbase = musb->ctrl_base; dsps_writel(mbase, wrp->control, glue->context.control); dsps_writel(mbase, wrp->epintr_set, glue->context.epintr); dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr); dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi); dsps_writel(mbase, wrp->mode, glue->context.mode); dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode); dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode); return 0; } #endif static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume); static struct platform_driver dsps_usbss_driver = { .probe = dsps_probe, .remove = dsps_remove, .driver = { .name = "musb-dsps", .pm = &dsps_pm_ops, .of_match_table = musb_dsps_of_match, }, }; MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer"); MODULE_AUTHOR("Ravi B "); MODULE_AUTHOR("Ajay Kumar Gupta "); MODULE_LICENSE("GPL v2"); module_platform_driver(dsps_usbss_driver);