/* * vsp1_uds.c -- R-Car VSP1 Up and Down Scaler * * Copyright (C) 2013-2014 Renesas Electronics Corporation * * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include "vsp1.h" #include "vsp1_dl.h" #include "vsp1_uds.h" #define UDS_MIN_SIZE 4U #define UDS_MAX_SIZE 8190U #define UDS_MIN_FACTOR 0x0100 #define UDS_MAX_FACTOR 0xffff /* ----------------------------------------------------------------------------- * Device Access */ static inline void vsp1_uds_write(struct vsp1_uds *uds, struct vsp1_dl_list *dl, u32 reg, u32 data) { vsp1_dl_list_write(dl, reg + uds->entity.index * VI6_UDS_OFFSET, data); } /* ----------------------------------------------------------------------------- * Scaling Computation */ void vsp1_uds_set_alpha(struct vsp1_uds *uds, struct vsp1_dl_list *dl, unsigned int alpha) { vsp1_uds_write(uds, dl, VI6_UDS_ALPVAL, alpha << VI6_UDS_ALPVAL_VAL0_SHIFT); } /* * uds_output_size - Return the output size for an input size and scaling ratio * @input: input size in pixels * @ratio: scaling ratio in U4.12 fixed-point format */ static unsigned int uds_output_size(unsigned int input, unsigned int ratio) { if (ratio > 4096) { /* Down-scaling */ unsigned int mp; mp = ratio / 4096; mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); return (input - 1) / mp * mp * 4096 / ratio + 1; } else { /* Up-scaling */ return (input - 1) * 4096 / ratio + 1; } } /* * uds_output_limits - Return the min and max output sizes for an input size * @input: input size in pixels * @minimum: minimum output size (returned) * @maximum: maximum output size (returned) */ static void uds_output_limits(unsigned int input, unsigned int *minimum, unsigned int *maximum) { *minimum = max(uds_output_size(input, UDS_MAX_FACTOR), UDS_MIN_SIZE); *maximum = min(uds_output_size(input, UDS_MIN_FACTOR), UDS_MAX_SIZE); } /* * uds_passband_width - Return the passband filter width for a scaling ratio * @ratio: scaling ratio in U4.12 fixed-point format */ static unsigned int uds_passband_width(unsigned int ratio) { if (ratio >= 4096) { /* Down-scaling */ unsigned int mp; mp = ratio / 4096; mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); return 64 * 4096 * mp / ratio; } else { /* Up-scaling */ return 64; } } static unsigned int uds_compute_ratio(unsigned int input, unsigned int output) { /* TODO: This is an approximation that will need to be refined. */ return (input - 1) * 4096 / (output - 1); } /* ----------------------------------------------------------------------------- * V4L2 Subdevice Pad Operations */ static int uds_enum_mbus_code(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) { static const unsigned int codes[] = { MEDIA_BUS_FMT_ARGB8888_1X32, MEDIA_BUS_FMT_AYUV8_1X32, }; return vsp1_subdev_enum_mbus_code(subdev, cfg, code, codes, ARRAY_SIZE(codes)); } static int uds_enum_frame_size(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_frame_size_enum *fse) { struct vsp1_uds *uds = to_uds(subdev); struct v4l2_subdev_pad_config *config; struct v4l2_mbus_framefmt *format; config = vsp1_entity_get_pad_config(&uds->entity, cfg, fse->which); if (!config) return -EINVAL; format = vsp1_entity_get_pad_format(&uds->entity, config, UDS_PAD_SINK); if (fse->index || fse->code != format->code) return -EINVAL; if (fse->pad == UDS_PAD_SINK) { fse->min_width = UDS_MIN_SIZE; fse->max_width = UDS_MAX_SIZE; fse->min_height = UDS_MIN_SIZE; fse->max_height = UDS_MAX_SIZE; } else { uds_output_limits(format->width, &fse->min_width, &fse->max_width); uds_output_limits(format->height, &fse->min_height, &fse->max_height); } return 0; } static void uds_try_format(struct vsp1_uds *uds, struct v4l2_subdev_pad_config *config, unsigned int pad, struct v4l2_mbus_framefmt *fmt) { struct v4l2_mbus_framefmt *format; unsigned int minimum; unsigned int maximum; switch (pad) { case UDS_PAD_SINK: /* Default to YUV if the requested format is not supported. */ if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 && fmt->code != MEDIA_BUS_FMT_AYUV8_1X32) fmt->code = MEDIA_BUS_FMT_AYUV8_1X32; fmt->width = clamp(fmt->width, UDS_MIN_SIZE, UDS_MAX_SIZE); fmt->height = clamp(fmt->height, UDS_MIN_SIZE, UDS_MAX_SIZE); break; case UDS_PAD_SOURCE: /* The UDS scales but can't perform format conversion. */ format = vsp1_entity_get_pad_format(&uds->entity, config, UDS_PAD_SINK); fmt->code = format->code; uds_output_limits(format->width, &minimum, &maximum); fmt->width = clamp(fmt->width, minimum, maximum); uds_output_limits(format->height, &minimum, &maximum); fmt->height = clamp(fmt->height, minimum, maximum); break; } fmt->field = V4L2_FIELD_NONE; fmt->colorspace = V4L2_COLORSPACE_SRGB; } static int uds_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) { struct vsp1_uds *uds = to_uds(subdev); struct v4l2_subdev_pad_config *config; struct v4l2_mbus_framefmt *format; config = vsp1_entity_get_pad_config(&uds->entity, cfg, fmt->which); if (!config) return -EINVAL; uds_try_format(uds, config, fmt->pad, &fmt->format); format = vsp1_entity_get_pad_format(&uds->entity, config, fmt->pad); *format = fmt->format; if (fmt->pad == UDS_PAD_SINK) { /* Propagate the format to the source pad. */ format = vsp1_entity_get_pad_format(&uds->entity, config, UDS_PAD_SOURCE); *format = fmt->format; uds_try_format(uds, config, UDS_PAD_SOURCE, format); } return 0; } /* ----------------------------------------------------------------------------- * V4L2 Subdevice Operations */ static const struct v4l2_subdev_pad_ops uds_pad_ops = { .init_cfg = vsp1_entity_init_cfg, .enum_mbus_code = uds_enum_mbus_code, .enum_frame_size = uds_enum_frame_size, .get_fmt = vsp1_subdev_get_pad_format, .set_fmt = uds_set_format, }; static const struct v4l2_subdev_ops uds_ops = { .pad = &uds_pad_ops, }; /* ----------------------------------------------------------------------------- * VSP1 Entity Operations */ static void uds_configure(struct vsp1_entity *entity, struct vsp1_pipeline *pipe, struct vsp1_dl_list *dl) { struct vsp1_uds *uds = to_uds(&entity->subdev); const struct v4l2_mbus_framefmt *output; const struct v4l2_mbus_framefmt *input; unsigned int hscale; unsigned int vscale; bool multitap; input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, UDS_PAD_SINK); output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, UDS_PAD_SOURCE); hscale = uds_compute_ratio(input->width, output->width); vscale = uds_compute_ratio(input->height, output->height); dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", hscale, vscale); /* Multi-tap scaling can't be enabled along with alpha scaling when * scaling down with a factor lower than or equal to 1/2 in either * direction. */ if (uds->scale_alpha && (hscale >= 8192 || vscale >= 8192)) multitap = false; else multitap = true; vsp1_uds_write(uds, dl, VI6_UDS_CTRL, (uds->scale_alpha ? VI6_UDS_CTRL_AON : 0) | (multitap ? VI6_UDS_CTRL_BC : 0)); vsp1_uds_write(uds, dl, VI6_UDS_PASS_BWIDTH, (uds_passband_width(hscale) << VI6_UDS_PASS_BWIDTH_H_SHIFT) | (uds_passband_width(vscale) << VI6_UDS_PASS_BWIDTH_V_SHIFT)); /* Set the scaling ratios and the output size. */ vsp1_uds_write(uds, dl, VI6_UDS_SCALE, (hscale << VI6_UDS_SCALE_HFRAC_SHIFT) | (vscale << VI6_UDS_SCALE_VFRAC_SHIFT)); vsp1_uds_write(uds, dl, VI6_UDS_CLIP_SIZE, (output->width << VI6_UDS_CLIP_SIZE_HSIZE_SHIFT) | (output->height << VI6_UDS_CLIP_SIZE_VSIZE_SHIFT)); } static const struct vsp1_entity_operations uds_entity_ops = { .configure = uds_configure, }; /* ----------------------------------------------------------------------------- * Initialization and Cleanup */ struct vsp1_uds *vsp1_uds_create(struct vsp1_device *vsp1, unsigned int index) { struct vsp1_uds *uds; char name[6]; int ret; uds = devm_kzalloc(vsp1->dev, sizeof(*uds), GFP_KERNEL); if (uds == NULL) return ERR_PTR(-ENOMEM); uds->entity.ops = &uds_entity_ops; uds->entity.type = VSP1_ENTITY_UDS; uds->entity.index = index; sprintf(name, "uds.%u", index); ret = vsp1_entity_init(vsp1, &uds->entity, name, 2, &uds_ops, MEDIA_ENT_F_PROC_VIDEO_SCALER); if (ret < 0) return ERR_PTR(ret); return uds; }