/* * Copyright 2012 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /include/ "skeleton.dtsi" / { interrupt-parent = <&icoll>; aliases { gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; gpio4 = &gpio4; saif0 = &saif0; saif1 = &saif1; serial0 = &auart0; serial1 = &auart1; serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; }; cpus { cpu@0 { compatible = "arm,arm926ejs"; }; }; apb@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80000000 0x80000>; ranges; apbh@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80000000 0x3c900>; ranges; icoll: interrupt-controller@80000000 { compatible = "fsl,imx28-icoll", "fsl,mxs-icoll"; interrupt-controller; #interrupt-cells = <1>; reg = <0x80000000 0x2000>; }; hsadc@80002000 { reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; }; perfmon@80006000 { reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; gpmi-nand@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; ssp0: ssp@80010000 { reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; }; pinctrl@80018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; interrupts = <127>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio1: gpio@1 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; interrupts = <126>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio2: gpio@2 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; interrupts = <125>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio3: gpio@3 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; interrupts = <124>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio4: gpio@4 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; interrupts = <123>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; duart_pins_a: duart@0 { reg = <0>; fsl,pinmux-ids = < 0x3102 /* MX28_PAD_PWM0__DUART_RX */ 0x3112 /* MX28_PAD_PWM1__DUART_TX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; duart_pins_b: duart@1 { reg = <1>; fsl,pinmux-ids = < 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; duart_4pins_a: duart-4pins@0 { reg = <0>; fsl,pinmux-ids = < 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; gpmi_status_cfg: gpmi-status-cfg { fsl,pinmux-ids = < 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ >; fsl,drive-strength = <2>; }; auart0_pins_a: auart0@0 { reg = <0>; fsl,pinmux-ids = < 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; auart0_2pins_a: auart0-2pins@0 { reg = <0>; fsl,pinmux-ids = < 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; auart1_pins_a: auart1@0 { reg = <0>; fsl,pinmux-ids = < 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; auart1_2pins_a: auart1-2pins@0 { reg = <0>; fsl,pinmux-ids = < 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; auart2_2pins_a: auart2-2pins@0 { reg = <0>; fsl,pinmux-ids = < 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; auart3_pins_a: auart3@0 { reg = <0>; fsl,pinmux-ids = < 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; auart3_2pins_a: auart3-2pins@0 { reg = <0>; fsl,pinmux-ids = < 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mac1_pins_a: mac1@0 { reg = <0>; fsl,pinmux-ids = < 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_4bit_pins_a: mmc0-4bit@0 { reg = <0>; fsl,pinmux-ids = < 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_cd_cfg: mmc0-cd-cfg { fsl,pinmux-ids = < 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ >; fsl,pull-up = <0>; }; mmc0_sck_cfg: mmc0-sck-cfg { fsl,pinmux-ids = < 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ >; fsl,drive-strength = <2>; fsl,pull-up = <0>; }; i2c0_pins_a: i2c0@0 { reg = <0>; fsl,pinmux-ids = < 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; i2c0_pins_b: i2c0@1 { reg = <1>; fsl,pinmux-ids = < 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; }; saif1_pins_a: saif1@0 { reg = <0>; fsl,pinmux-ids = < 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; }; pwm0_pins_a: pwm0@0 { reg = <0>; fsl,pinmux-ids = < 0x3100 /* MX28_PAD_PWM0__PWM_0 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < 0x3120 /* MX28_PAD_PWM2__PWM_2 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; can1_pins_a: can1@0 { reg = <0>; fsl,pinmux-ids = < 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; }; digctl@8001c000 { reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; }; dcp@80028000 { reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { reg = <0x8003c800 0x100>; status = "disabled"; }; }; apbx@80040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80040000 0x40000>; ranges; clkctl@80040000 { reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; status = "disabled"; }; spdif@80054000 { reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 0x2000>; interrupts = <29>; }; i2c0: i2c@80058000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; }; i2c1: i2c@8005a000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; }; pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { reg = <0x80068000 0x2000>; status = "disabled"; }; auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; status = "disabled"; }; auart1: serial@8006c000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; status = "disabled"; }; auart2: serial@8006e000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; status = "disabled"; }; auart3: serial@80070000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; status = "disabled"; }; auart4: serial@80072000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; status = "disabled"; }; duart: serial@80074000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80074000 0x1000>; interrupts = <47>; status = "disabled"; }; usbphy0: usbphy@8007c000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; status = "disabled"; }; usbphy1: usbphy@8007e000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; status = "disabled"; }; }; }; ahb@80080000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80080000 0x80000>; ranges; usb0: usb@80080000 { compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; interrupts = <93>; fsl,usbphy = <&usbphy0>; status = "disabled"; }; usb1: usb@80090000 { compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; interrupts = <92>; fsl,usbphy = <&usbphy1>; status = "disabled"; }; dflpt@800c0000 { reg = <0x800c0000 0x10000>; status = "disabled"; }; mac0: ethernet@800f0000 { compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; status = "disabled"; }; mac1: ethernet@800f4000 { compatible = "fsl,imx28-fec"; reg = <0x800f4000 0x4000>; interrupts = <102>; status = "disabled"; }; switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; }; };