/** * core.c - DesignWare USB3 DRD Controller Core file * * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com * * Authors: Felipe Balbi , * Sebastian Andrzej Siewior * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The names of the above-listed copyright holders may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2, as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "core.h" #include "gadget.h" #include "io.h" #include "debug.h" static char *maximum_speed = "super"; module_param(maximum_speed, charp, 0); MODULE_PARM_DESC(maximum_speed, "Maximum supported speed."); /* -------------------------------------------------------------------------- */ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); } /** * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ static void dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; /* Before Resetting PHY, put Core in Reset */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg |= DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); /* Assert USB3 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); /* Assert USB2 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); mdelay(100); /* Clear USB3 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); /* Clear USB2 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); mdelay(100); /* After PHYs are stable we can take Core out of reset state */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); } /** * dwc3_free_one_event_buffer - Frees one event buffer * @dwc: Pointer to our controller context structure * @evt: Pointer to event buffer to be freed */ static void dwc3_free_one_event_buffer(struct dwc3 *dwc, struct dwc3_event_buffer *evt) { dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); } /** * dwc3_alloc_one_event_buffer - Allocates one event buffer structure * @dwc: Pointer to our controller context structure * @length: size of the event buffer * * Returns a pointer to the allocated event buffer structure on success * otherwise ERR_PTR(errno). */ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) { struct dwc3_event_buffer *evt; evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); if (!evt) return ERR_PTR(-ENOMEM); evt->dwc = dwc; evt->length = length; evt->buf = dma_alloc_coherent(dwc->dev, length, &evt->dma, GFP_KERNEL); if (!evt->buf) return ERR_PTR(-ENOMEM); return evt; } /** * dwc3_free_event_buffers - frees all allocated event buffers * @dwc: Pointer to our controller context structure */ static void dwc3_free_event_buffers(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int i; for (i = 0; i < dwc->num_event_buffers; i++) { evt = dwc->ev_buffs[i]; if (evt) dwc3_free_one_event_buffer(dwc, evt); } } /** * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length * @dwc: pointer to our controller context structure * @length: size of event buffer * * Returns 0 on success otherwise negative errno. In the error case, dwc * may contain some buffers allocated but not all which were requested. */ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) { int num; int i; num = DWC3_NUM_INT(dwc->hwparams.hwparams1); dwc->num_event_buffers = num; dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, GFP_KERNEL); if (!dwc->ev_buffs) { dev_err(dwc->dev, "can't allocate event buffers array\n"); return -ENOMEM; } for (i = 0; i < num; i++) { struct dwc3_event_buffer *evt; evt = dwc3_alloc_one_event_buffer(dwc, length); if (IS_ERR(evt)) { dev_err(dwc->dev, "can't allocate event buffer\n"); return PTR_ERR(evt); } dwc->ev_buffs[i] = evt; } return 0; } /** * dwc3_event_buffers_setup - setup our allocated event buffers * @dwc: pointer to our controller context structure * * Returns 0 on success otherwise negative errno. */ static int dwc3_event_buffers_setup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int n; for (n = 0; n < dwc->num_event_buffers; n++) { evt = dwc->ev_buffs[n]; dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", evt->buf, (unsigned long long) evt->dma, evt->length); evt->lpos = 0; dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), lower_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), upper_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), evt->length & 0xffff); dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); } return 0; } static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int n; for (n = 0; n < dwc->num_event_buffers; n++) { evt = dwc->ev_buffs[n]; evt->lpos = 0; dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0); dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); } } static void dwc3_cache_hwparams(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } /** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure * * Returns 0 on success otherwise negative errno. */ static int dwc3_core_init(struct dwc3 *dwc) { unsigned long timeout; u32 reg; int ret; reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); /* This should read as U3 followed by revision number */ if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); ret = -ENODEV; goto err0; } dwc->revision = reg; /* issue device SoftReset too */ timeout = jiffies + msecs_to_jiffies(500); dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); do { reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (!(reg & DWC3_DCTL_CSFTRST)) break; if (time_after(jiffies, timeout)) { dev_err(dwc->dev, "Reset Timed Out\n"); ret = -ETIMEDOUT; goto err0; } cpu_relax(); } while (true); dwc3_core_soft_reset(dwc); reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; reg &= ~DWC3_GCTL_DISSCRAMBLE; switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: reg &= ~DWC3_GCTL_DSBLCLKGTNG; break; default: dev_dbg(dwc->dev, "No power optimization available\n"); } /* * WORKAROUND: DWC3 revisions <1.90a have a bug * where the device can fail to connect at SuperSpeed * and falls back to high-speed mode which causes * the device to enter a Connect/Disconnect loop */ if (dwc->revision < DWC3_REVISION_190A) reg |= DWC3_GCTL_U2RSTECN; dwc3_writel(dwc->regs, DWC3_GCTL, reg); ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); goto err0; } return 0; err0: return ret; } static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); } #define DWC3_ALIGN_MASK (16 - 1) static int dwc3_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; struct resource *res; struct dwc3 *dwc; struct device *dev = &pdev->dev; int ret = -ENOMEM; void __iomem *regs; void *mem; u8 mode; mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); if (!mem) { dev_err(dev, "not enough memory\n"); return -ENOMEM; } dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); dwc->mem = mem; res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { dev_err(dev, "missing IRQ\n"); return -ENODEV; } dwc->xhci_resources[1].start = res->start; dwc->xhci_resources[1].end = res->end; dwc->xhci_resources[1].flags = res->flags; dwc->xhci_resources[1].name = res->name; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory resource\n"); return -ENODEV; } dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; dwc->xhci_resources[0].flags = res->flags; dwc->xhci_resources[0].name = res->name; /* * Request memory region but exclude xHCI regs, * since it will be requested by the xhci-plat driver. */ res = devm_request_mem_region(dev, res->start + DWC3_GLOBALS_REGS_START, resource_size(res) - DWC3_GLOBALS_REGS_START, dev_name(dev)); if (!res) { dev_err(dev, "can't request mem region\n"); return -ENOMEM; } regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); if (!regs) { dev_err(dev, "ioremap failed\n"); return -ENOMEM; } dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(dwc->usb2_phy)) { dev_err(dev, "no usb2 phy configured\n"); return -EPROBE_DEFER; } dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); if (IS_ERR_OR_NULL(dwc->usb3_phy)) { dev_err(dev, "no usb3 phy configured\n"); return -EPROBE_DEFER; } spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); dwc->regs = regs; dwc->regs_size = resource_size(res); dwc->dev = dev; if (!strncmp("super", maximum_speed, 5)) dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; else if (!strncmp("high", maximum_speed, 4)) dwc->maximum_speed = DWC3_DCFG_HIGHSPEED; else if (!strncmp("full", maximum_speed, 4)) dwc->maximum_speed = DWC3_DCFG_FULLSPEED1; else if (!strncmp("low", maximum_speed, 3)) dwc->maximum_speed = DWC3_DCFG_LOWSPEED; else dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; if (of_get_property(node, "tx-fifo-resize", NULL)) dwc->needs_fifo_resize = true; pm_runtime_enable(dev); pm_runtime_get_sync(dev); pm_runtime_forbid(dev); dwc3_cache_hwparams(dwc); ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); if (ret) { dev_err(dwc->dev, "failed to allocate event buffers\n"); ret = -ENOMEM; goto err0; } ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); goto err0; } mode = DWC3_MODE(dwc->hwparams.hwparams0); switch (mode) { case DWC3_MODE_DEVICE: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) { dev_err(dev, "failed to initialize gadget\n"); goto err1; } break; case DWC3_MODE_HOST: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); ret = dwc3_host_init(dwc); if (ret) { dev_err(dev, "failed to initialize host\n"); goto err1; } break; case DWC3_MODE_DRD: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); ret = dwc3_host_init(dwc); if (ret) { dev_err(dev, "failed to initialize host\n"); goto err1; } ret = dwc3_gadget_init(dwc); if (ret) { dev_err(dev, "failed to initialize gadget\n"); goto err1; } break; default: dev_err(dev, "Unsupported mode of operation %d\n", mode); goto err1; } dwc->mode = mode; ret = dwc3_debugfs_init(dwc); if (ret) { dev_err(dev, "failed to initialize debugfs\n"); goto err2; } pm_runtime_allow(dev); return 0; err2: switch (mode) { case DWC3_MODE_DEVICE: dwc3_gadget_exit(dwc); break; case DWC3_MODE_HOST: dwc3_host_exit(dwc); break; case DWC3_MODE_DRD: dwc3_host_exit(dwc); dwc3_gadget_exit(dwc); break; default: /* do nothing */ break; } err1: dwc3_core_exit(dwc); err0: dwc3_free_event_buffers(dwc); return ret; } static int __devexit dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); struct resource *res; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); dwc3_debugfs_exit(dwc); switch (dwc->mode) { case DWC3_MODE_DEVICE: dwc3_gadget_exit(dwc); break; case DWC3_MODE_HOST: dwc3_host_exit(dwc); break; case DWC3_MODE_DRD: dwc3_host_exit(dwc); dwc3_gadget_exit(dwc); break; default: /* do nothing */ break; } dwc3_core_exit(dwc); return 0; } static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove = dwc3_remove, .driver = { .name = "dwc3", }, }; module_platform_driver(dwc3_driver); MODULE_ALIAS("platform:dwc3"); MODULE_AUTHOR("Felipe Balbi "); MODULE_LICENSE("Dual BSD/GPL"); MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");