/* * Copyright © 2006-2007 Intel Corporation * Copyright (c) 2006 Dave Airlie * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt * Dave Airlie * Jesse Barnes */ #include #include #include #include "drmP.h" #include "drm.h" #include "drm_crtc.h" #include "drm_edid.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" #include /* Private structure for the integrated LVDS support */ struct intel_lvds_priv { int fitting_mode; u32 pfit_control; u32 pfit_pgm_ratios; }; /** * Sets the backlight level. * * \param level backlight level, from 0 to intel_lvds_get_max_backlight(). */ static void intel_lvds_set_backlight(struct drm_device *dev, int level) { struct drm_i915_private *dev_priv = dev->dev_private; u32 blc_pwm_ctl, reg; if (IS_IRONLAKE(dev)) reg = BLC_PWM_CPU_CTL; else reg = BLC_PWM_CTL; blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(reg, (blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); } /** * Returns the maximum level of the backlight duty cycle field. */ static u32 intel_lvds_get_max_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; if (IS_IRONLAKE(dev)) reg = BLC_PWM_PCH_CTL2; else reg = BLC_PWM_CTL; return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >> BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; } /** * Sets the power state for the panel. */ static void intel_lvds_set_power(struct drm_device *dev, bool on) { struct drm_i915_private *dev_priv = dev->dev_private; u32 pp_status, ctl_reg, status_reg; if (IS_IRONLAKE(dev)) { ctl_reg = PCH_PP_CONTROL; status_reg = PCH_PP_STATUS; } else { ctl_reg = PP_CONTROL; status_reg = PP_STATUS; } if (on) { I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); do { pp_status = I915_READ(status_reg); } while ((pp_status & PP_ON) == 0); intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); } else { intel_lvds_set_backlight(dev, 0); I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); do { pp_status = I915_READ(status_reg); } while (pp_status & PP_ON); } } static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; if (mode == DRM_MODE_DPMS_ON) intel_lvds_set_power(dev, true); else intel_lvds_set_power(dev, false); /* XXX: We never power down the LVDS pairs. */ } static void intel_lvds_save(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; u32 pwm_ctl_reg; if (IS_IRONLAKE(dev)) { pp_on_reg = PCH_PP_ON_DELAYS; pp_off_reg = PCH_PP_OFF_DELAYS; pp_ctl_reg = PCH_PP_CONTROL; pp_div_reg = PCH_PP_DIVISOR; pwm_ctl_reg = BLC_PWM_CPU_CTL; } else { pp_on_reg = PP_ON_DELAYS; pp_off_reg = PP_OFF_DELAYS; pp_ctl_reg = PP_CONTROL; pp_div_reg = PP_DIVISOR; pwm_ctl_reg = BLC_PWM_CTL; } dev_priv->savePP_ON = I915_READ(pp_on_reg); dev_priv->savePP_OFF = I915_READ(pp_off_reg); dev_priv->savePP_CONTROL = I915_READ(pp_ctl_reg); dev_priv->savePP_DIVISOR = I915_READ(pp_div_reg); dev_priv->saveBLC_PWM_CTL = I915_READ(pwm_ctl_reg); dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); /* * If the light is off at server startup, just make it full brightness */ if (dev_priv->backlight_duty_cycle == 0) dev_priv->backlight_duty_cycle = intel_lvds_get_max_backlight(dev); } static void intel_lvds_restore(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; u32 pwm_ctl_reg; if (IS_IRONLAKE(dev)) { pp_on_reg = PCH_PP_ON_DELAYS; pp_off_reg = PCH_PP_OFF_DELAYS; pp_ctl_reg = PCH_PP_CONTROL; pp_div_reg = PCH_PP_DIVISOR; pwm_ctl_reg = BLC_PWM_CPU_CTL; } else { pp_on_reg = PP_ON_DELAYS; pp_off_reg = PP_OFF_DELAYS; pp_ctl_reg = PP_CONTROL; pp_div_reg = PP_DIVISOR; pwm_ctl_reg = BLC_PWM_CTL; } I915_WRITE(pwm_ctl_reg, dev_priv->saveBLC_PWM_CTL); I915_WRITE(pp_on_reg, dev_priv->savePP_ON); I915_WRITE(pp_off_reg, dev_priv->savePP_OFF); I915_WRITE(pp_div_reg, dev_priv->savePP_DIVISOR); I915_WRITE(pp_ctl_reg, dev_priv->savePP_CONTROL); if (dev_priv->savePP_CONTROL & POWER_TARGET_ON) intel_lvds_set_power(dev, true); else intel_lvds_set_power(dev, false); } static int intel_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode; if (fixed_mode) { if (mode->hdisplay > fixed_mode->hdisplay) return MODE_PANEL; if (mode->vdisplay > fixed_mode->vdisplay) return MODE_PANEL; } return MODE_OK; } static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { /* * float point operation is not supported . So the PANEL_RATIO_FACTOR * is defined, which can avoid the float point computation when * calculating the panel ratio. */ #define PANEL_RATIO_FACTOR 8192 struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct drm_encoder *tmp_encoder; struct intel_output *intel_output = enc_to_intel_output(encoder); struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; u32 pfit_control = 0, pfit_pgm_ratios = 0; int left_border = 0, right_border = 0, top_border = 0; int bottom_border = 0; bool border = 0; int panel_ratio, desired_ratio, vert_scale, horiz_scale; int horiz_ratio, vert_ratio; u32 hsync_width, vsync_width; u32 hblank_width, vblank_width; u32 hsync_pos, vsync_pos; /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { DRM_ERROR("Can't support LVDS on pipe A\n"); return false; } /* Should never happen!! */ list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { DRM_ERROR("Can't enable LVDS and another " "encoder on the same pipe\n"); return false; } } /* If we don't have a panel mode, there is nothing we can do */ if (dev_priv->panel_fixed_mode == NULL) return true; /* * If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, * with the panel scaling set up to source from the H/VDisplay * of the original mode. */ if (dev_priv->panel_fixed_mode != NULL) { adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay; adjusted_mode->hsync_start = dev_priv->panel_fixed_mode->hsync_start; adjusted_mode->hsync_end = dev_priv->panel_fixed_mode->hsync_end; adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal; adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay; adjusted_mode->vsync_start = dev_priv->panel_fixed_mode->vsync_start; adjusted_mode->vsync_end = dev_priv->panel_fixed_mode->vsync_end; adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal; adjusted_mode->clock = dev_priv->panel_fixed_mode->clock; drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); } /* Make sure pre-965s set dither correctly */ if (!IS_I965G(dev)) { if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) pfit_control |= PANEL_8TO6_DITHER_ENABLE; } /* Native modes don't need fitting */ if (adjusted_mode->hdisplay == mode->hdisplay && adjusted_mode->vdisplay == mode->vdisplay) { pfit_pgm_ratios = 0; border = 0; goto out; } /* full screen scale for now */ if (IS_IRONLAKE(dev)) goto out; /* 965+ wants fuzzy fitting */ if (IS_I965G(dev)) pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY; hsync_width = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; vsync_width = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; hblank_width = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; vblank_width = adjusted_mode->crtc_vblank_end - adjusted_mode->crtc_vblank_start; /* * Deal with panel fitting options. Figure out how to stretch the * image based on its aspect ratio & the current panel fitting mode. */ panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / adjusted_mode->vdisplay; desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR / mode->vdisplay; /* * Enable automatic panel scaling for non-native modes so that they fill * the screen. Should be enabled before the pipe is enabled, according * to register description and PRM. * Change the value here to see the borders for debugging */ if (!IS_IRONLAKE(dev)) { I915_WRITE(BCLRPAT_A, 0); I915_WRITE(BCLRPAT_B, 0); } switch (lvds_priv->fitting_mode) { case DRM_MODE_SCALE_CENTER: /* * For centered modes, we have to calculate border widths & * heights and modify the values programmed into the CRTC. */ left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2; right_border = left_border; if (mode->hdisplay & 1) right_border++; top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2; bottom_border = top_border; if (mode->vdisplay & 1) bottom_border++; /* Set active & border values */ adjusted_mode->crtc_hdisplay = mode->hdisplay; /* Keep the boder be even */ if (right_border & 1) right_border++; /* use the border directly instead of border minuse one */ adjusted_mode->crtc_hblank_start = mode->hdisplay + right_border; /* keep the blank width constant */ adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_start + hblank_width; /* get the hsync pos relative to hblank start */ hsync_pos = (hblank_width - hsync_width) / 2; /* keep the hsync pos be even */ if (hsync_pos & 1) hsync_pos++; adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hblank_start + hsync_pos; /* keep the hsync width constant */ adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + hsync_width; adjusted_mode->crtc_vdisplay = mode->vdisplay; /* use the border instead of border minus one */ adjusted_mode->crtc_vblank_start = mode->vdisplay + bottom_border; /* keep the vblank width constant */ adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vblank_start + vblank_width; /* get the vsync start postion relative to vblank start */ vsync_pos = (vblank_width - vsync_width) / 2; adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vblank_start + vsync_pos; /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + vsync_width; border = 1; break; case DRM_MODE_SCALE_ASPECT: /* Scale but preserve the spect ratio */ pfit_control |= PFIT_ENABLE; if (IS_I965G(dev)) { /* 965+ is easy, it does everything in hw */ if (panel_ratio > desired_ratio) pfit_control |= PFIT_SCALING_PILLAR; else if (panel_ratio < desired_ratio) pfit_control |= PFIT_SCALING_LETTER; else pfit_control |= PFIT_SCALING_AUTO; } else { /* * For earlier chips we have to calculate the scaling * ratio by hand and program it into the * PFIT_PGM_RATIO register */ u32 horiz_bits, vert_bits, bits = 12; horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/ adjusted_mode->hdisplay; vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/ adjusted_mode->vdisplay; horiz_scale = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / mode->hdisplay; vert_scale = adjusted_mode->vdisplay * PANEL_RATIO_FACTOR / mode->vdisplay; /* retain aspect ratio */ if (panel_ratio > desired_ratio) { /* Pillar */ u32 scaled_width; scaled_width = mode->hdisplay * vert_scale / PANEL_RATIO_FACTOR; horiz_ratio = vert_ratio; pfit_control |= (VERT_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); /* Pillar will have left/right borders */ left_border = (adjusted_mode->hdisplay - scaled_width) / 2; right_border = left_border; if (mode->hdisplay & 1) /* odd resolutions */ right_border++; /* keep the border be even */ if (right_border & 1) right_border++; adjusted_mode->crtc_hdisplay = scaled_width; /* use border instead of border minus one */ adjusted_mode->crtc_hblank_start = scaled_width + right_border; /* keep the hblank width constant */ adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_start + hblank_width; /* * get the hsync start pos relative to * hblank start */ hsync_pos = (hblank_width - hsync_width) / 2; /* keep the hsync_pos be even */ if (hsync_pos & 1) hsync_pos++; adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hblank_start + hsync_pos; /* keept hsync width constant */ adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + hsync_width; border = 1; } else if (panel_ratio < desired_ratio) { /* letter */ u32 scaled_height = mode->vdisplay * horiz_scale / PANEL_RATIO_FACTOR; vert_ratio = horiz_ratio; pfit_control |= (HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); /* Letterbox will have top/bottom border */ top_border = (adjusted_mode->vdisplay - scaled_height) / 2; bottom_border = top_border; if (mode->vdisplay & 1) bottom_border++; adjusted_mode->crtc_vdisplay = scaled_height; /* use border instead of border minus one */ adjusted_mode->crtc_vblank_start = scaled_height + bottom_border; /* keep the vblank width constant */ adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vblank_start + vblank_width; /* * get the vsync start pos relative to * vblank start */ vsync_pos = (vblank_width - vsync_width) / 2; adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vblank_start + vsync_pos; /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + vsync_width; border = 1; } else { /* Aspects match, Let hw scale both directions */ pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } horiz_bits = (1 << bits) * horiz_ratio / PANEL_RATIO_FACTOR; vert_bits = (1 << bits) * vert_ratio / PANEL_RATIO_FACTOR; pfit_pgm_ratios = ((vert_bits << PFIT_VERT_SCALE_SHIFT) & PFIT_VERT_SCALE_MASK) | ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) & PFIT_HORIZ_SCALE_MASK); } break; case DRM_MODE_SCALE_FULLSCREEN: /* * Full scaling, even if it changes the aspect ratio. * Fortunately this is all done for us in hw. */ pfit_control |= PFIT_ENABLE; if (IS_I965G(dev)) pfit_control |= PFIT_SCALING_AUTO; else pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); break; default: break; } out: lvds_priv->pfit_control = pfit_control; lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; /* * When there exists the border, it means that the LVDS_BORDR * should be enabled. */ if (border) dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE; else dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE); /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the * user's requested refresh rate. */ return true; } static void intel_lvds_prepare(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; if (IS_IRONLAKE(dev)) reg = BLC_PWM_CPU_CTL; else reg = BLC_PWM_CTL; dev_priv->saveBLC_PWM_CTL = I915_READ(reg); dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); intel_lvds_set_power(dev, false); } static void intel_lvds_commit( struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; if (dev_priv->backlight_duty_cycle == 0) dev_priv->backlight_duty_cycle = intel_lvds_get_max_backlight(dev); intel_lvds_set_power(dev, true); } static void intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_output *intel_output = enc_to_intel_output(encoder); struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; /* * The LVDS pin pair will already have been turned on in the * intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ if (IS_IRONLAKE(dev)) return; /* * Enable automatic panel scaling so that non-native modes fill the * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios); I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control); } /* Some lid devices report incorrect lid status, assume they're connected */ static const struct dmi_system_id bad_lid_status[] = { { .ident = "Compaq nx9020", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_BOARD_NAME, "3084"), }, }, { .ident = "Samsung SX20S", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), DMI_MATCH(DMI_BOARD_NAME, "SX20S"), }, }, { .ident = "Aspire One", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"), }, }, { .ident = "PC-81005", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MALATA"), DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"), }, }, { } }; /** * Detect the LVDS connection. * * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means * connected and closed means disconnected. We also send hotplug events as * needed, using lid status notification from the input layer. */ static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector) { enum drm_connector_status status = connector_status_connected; if (!acpi_lid_open() && !dmi_check_system(bad_lid_status)) status = connector_status_disconnected; return status; } /** * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. */ static int intel_lvds_get_modes(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct intel_output *intel_output = to_intel_output(connector); struct drm_i915_private *dev_priv = dev->dev_private; int ret = 0; ret = intel_ddc_get_modes(intel_output); if (ret) return ret; /* Didn't get an EDID, so * Set wide sync ranges so we get all modes * handed to valid_mode for checking */ connector->display_info.min_vfreq = 0; connector->display_info.max_vfreq = 200; connector->display_info.min_hfreq = 0; connector->display_info.max_hfreq = 200; if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); return 1; } return 0; } /* * Lid events. Note the use of 'modeset_on_lid': * - we set it on lid close, and reset it on open * - we use it as a "only once" bit (ie we ignore * duplicate events where it was already properly * set/reset) * - the suspend/resume paths will also set it to * zero, since they restore the mode ("lid open"). */ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, void *unused) { struct drm_i915_private *dev_priv = container_of(nb, struct drm_i915_private, lid_notifier); struct drm_device *dev = dev_priv->dev; struct drm_connector *connector = dev_priv->int_lvds_connector; /* * check and update the status of LVDS connector after receiving * the LID nofication event. */ if (connector) connector->status = connector->funcs->detect(connector); if (!acpi_lid_open()) { dev_priv->modeset_on_lid = 1; return NOTIFY_OK; } if (!dev_priv->modeset_on_lid) return NOTIFY_OK; dev_priv->modeset_on_lid = 0; mutex_lock(&dev->mode_config.mutex); drm_helper_resume_force_mode(dev); mutex_unlock(&dev->mode_config.mutex); return NOTIFY_OK; } /** * intel_lvds_destroy - unregister and free LVDS structures * @connector: connector to free * * Unregister the DDC bus for this connector then free the driver private * structure. */ static void intel_lvds_destroy(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct intel_output *intel_output = to_intel_output(connector); struct drm_i915_private *dev_priv = dev->dev_private; if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); if (dev_priv->lid_notifier.notifier_call) acpi_lid_notifier_unregister(&dev_priv->lid_notifier); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); kfree(connector); } static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { struct drm_device *dev = connector->dev; struct intel_output *intel_output = to_intel_output(connector); if (property == dev->mode_config.scaling_mode_property && connector->encoder) { struct drm_crtc *crtc = connector->encoder->crtc; struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; if (value == DRM_MODE_SCALE_NONE) { DRM_DEBUG_KMS("no scaling not supported\n"); return 0; } if (lvds_priv->fitting_mode == value) { /* the LVDS scaling property is not changed */ return 0; } lvds_priv->fitting_mode = value; if (crtc && crtc->enabled) { /* * If the CRTC is enabled, the display will be changed * according to the new panel fitting mode. */ drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb); } } return 0; } static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { .dpms = intel_lvds_dpms, .mode_fixup = intel_lvds_mode_fixup, .prepare = intel_lvds_prepare, .mode_set = intel_lvds_mode_set, .commit = intel_lvds_commit, }; static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { .get_modes = intel_lvds_get_modes, .mode_valid = intel_lvds_mode_valid, .best_encoder = intel_best_encoder, }; static const struct drm_connector_funcs intel_lvds_connector_funcs = { .dpms = drm_helper_connector_dpms, .save = intel_lvds_save, .restore = intel_lvds_restore, .detect = intel_lvds_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_lvds_set_property, .destroy = intel_lvds_destroy, }; static void intel_lvds_enc_destroy(struct drm_encoder *encoder) { drm_encoder_cleanup(encoder); } static const struct drm_encoder_funcs intel_lvds_enc_funcs = { .destroy = intel_lvds_enc_destroy, }; static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) { DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident); return 1; } /* These systems claim to have LVDS, but really don't */ static const struct dmi_system_id intel_no_lvds[] = { { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core series)", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), }, }, { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core 2 series)", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), }, }, { .callback = intel_no_lvds_dmi_callback, .ident = "MSI IM-945GSE-A", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MSI"), DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"), }, }, { .callback = intel_no_lvds_dmi_callback, .ident = "Dell Studio Hybrid", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"), }, }, { .callback = intel_no_lvds_dmi_callback, .ident = "AOpen Mini PC", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "AOpen"), DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"), }, }, { .callback = intel_no_lvds_dmi_callback, .ident = "AOpen Mini PC MP915", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"), DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"), }, }, { .callback = intel_no_lvds_dmi_callback, .ident = "Aopen i945GTt-VFA", .matches = { DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"), }, }, { } /* terminating entry */ }; /** * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID * @dev: drm device * @connector: LVDS connector * * Find the reduced downclock for LVDS in EDID. */ static void intel_find_lvds_downclock(struct drm_device *dev, struct drm_connector *connector) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *scan, *panel_fixed_mode; int temp_downclock; panel_fixed_mode = dev_priv->panel_fixed_mode; temp_downclock = panel_fixed_mode->clock; mutex_lock(&dev->mode_config.mutex); list_for_each_entry(scan, &connector->probed_modes, head) { /* * If one mode has the same resolution with the fixed_panel * mode while they have the different refresh rate, it means * that the reduced downclock is found for the LVDS. In such * case we can set the different FPx0/1 to dynamically select * between low and high frequency. */ if (scan->hdisplay == panel_fixed_mode->hdisplay && scan->hsync_start == panel_fixed_mode->hsync_start && scan->hsync_end == panel_fixed_mode->hsync_end && scan->htotal == panel_fixed_mode->htotal && scan->vdisplay == panel_fixed_mode->vdisplay && scan->vsync_start == panel_fixed_mode->vsync_start && scan->vsync_end == panel_fixed_mode->vsync_end && scan->vtotal == panel_fixed_mode->vtotal) { if (scan->clock < temp_downclock) { /* * The downclock is already found. But we * expect to find the lower downclock. */ temp_downclock = scan->clock; } } } mutex_unlock(&dev->mode_config.mutex); if (temp_downclock < panel_fixed_mode->clock && i915_lvds_downclock) { /* We found the downclock for LVDS. */ dev_priv->lvds_downclock_avail = 1; dev_priv->lvds_downclock = temp_downclock; DRM_DEBUG_KMS("LVDS downclock is found in EDID. " "Normal clock %dKhz, downclock %dKhz\n", panel_fixed_mode->clock, temp_downclock); } return; } /* * Enumerate the child dev array parsed from VBT to check whether * the LVDS is present. * If it is present, return 1. * If it is not present, return false. * If no child dev is parsed from VBT, it assumes that the LVDS is present. * Note: The addin_offset should also be checked for LVDS panel. * Only when it is non-zero, it is assumed that it is present. */ static int lvds_is_present_in_vbt(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct child_device_config *p_child; int i, ret; if (!dev_priv->child_dev_num) return 1; ret = 0; for (i = 0; i < dev_priv->child_dev_num; i++) { p_child = dev_priv->child_dev + i; /* * If the device type is not LFP, continue. * If the device type is 0x22, it is also regarded as LFP. */ if (p_child->device_type != DEVICE_TYPE_INT_LFP && p_child->device_type != DEVICE_TYPE_LFP) continue; /* The addin_offset should be checked. Only when it is * non-zero, it is regarded as present. */ if (p_child->addin_offset) { ret = 1; break; } } return ret; } /** * intel_lvds_init - setup LVDS connectors on this device * @dev: drm device * * Create the connector, register the LVDS DDC bus, and try to figure out what * modes we can display on the LVDS panel (if present). */ void intel_lvds_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_output *intel_output; struct drm_connector *connector; struct drm_encoder *encoder; struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; struct intel_lvds_priv *lvds_priv; u32 lvds; int pipe, gpio = GPIOC; /* Skip init on machines we know falsely report LVDS */ if (dmi_check_system(intel_no_lvds)) return; if (!lvds_is_present_in_vbt(dev)) { DRM_DEBUG_KMS("LVDS is not present in VBT\n"); return; } if (IS_IRONLAKE(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) return; if (dev_priv->edp_support) { DRM_DEBUG_KMS("disable LVDS for eDP support\n"); return; } gpio = PCH_GPIOC; } intel_output = kzalloc(sizeof(struct intel_output) + sizeof(struct intel_lvds_priv), GFP_KERNEL); if (!intel_output) { return; } connector = &intel_output->base; encoder = &intel_output->enc; drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs, DRM_MODE_CONNECTOR_LVDS); drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS); drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); intel_output->type = INTEL_OUTPUT_LVDS; intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT); intel_output->crtc_mask = (1 << 1); drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs); drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs); connector->display_info.subpixel_order = SubPixelHorizontalRGB; connector->interlace_allowed = false; connector->doublescan_allowed = false; lvds_priv = (struct intel_lvds_priv *)(intel_output + 1); intel_output->dev_priv = lvds_priv; /* create the scaling mode property */ drm_mode_create_scaling_mode_property(dev); /* * the initial panel fitting mode will be FULL_SCREEN. */ drm_connector_attach_property(&intel_output->base, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN; /* * LVDS discovery: * 1) check for EDID on DDC * 2) check for VBT data * 3) check to see if LVDS is already on * if none of the above, no panel * 4) make sure lid is open * if closed, act like it's not there for now */ /* Set up the DDC bus. */ intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C"); if (!intel_output->ddc_bus) { dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " "failed.\n"); goto failed; } /* * Attempt to get the fixed panel mode from DDC. Assume that the * preferred mode is the right one. */ intel_ddc_get_modes(intel_output); list_for_each_entry(scan, &connector->probed_modes, head) { mutex_lock(&dev->mode_config.mutex); if (scan->type & DRM_MODE_TYPE_PREFERRED) { dev_priv->panel_fixed_mode = drm_mode_duplicate(dev, scan); mutex_unlock(&dev->mode_config.mutex); intel_find_lvds_downclock(dev, connector); goto out; } mutex_unlock(&dev->mode_config.mutex); } /* Failed to get EDID, what about VBT? */ if (dev_priv->lfp_lvds_vbt_mode) { mutex_lock(&dev->mode_config.mutex); dev_priv->panel_fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); mutex_unlock(&dev->mode_config.mutex); if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; goto out; } } /* * If we didn't get EDID, try checking if the panel is already turned * on. If so, assume that whatever is currently programmed is the * correct mode. */ /* Ironlake: FIXME if still fail, not try pipe mode now */ if (IS_IRONLAKE(dev)) goto failed; lvds = I915_READ(LVDS); pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; crtc = intel_get_crtc_from_pipe(dev, pipe); if (crtc && (lvds & LVDS_PORT_EN)) { dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc); if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; goto out; } } /* If we still don't have a mode after all that, give up. */ if (!dev_priv->panel_fixed_mode) goto failed; out: if (IS_IRONLAKE(dev)) { u32 pwm; /* make sure PWM is enabled */ pwm = I915_READ(BLC_PWM_CPU_CTL2); pwm |= (PWM_ENABLE | PWM_PIPE_B); I915_WRITE(BLC_PWM_CPU_CTL2, pwm); pwm = I915_READ(BLC_PWM_PCH_CTL1); pwm |= PWM_PCH_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, pwm); } dev_priv->lid_notifier.notifier_call = intel_lid_notify; if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) { DRM_DEBUG_KMS("lid notifier registration failed\n"); dev_priv->lid_notifier.notifier_call = NULL; } /* keep the LVDS connector */ dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); return; failed: DRM_DEBUG_KMS("No LVDS modes found, disabling.\n"); if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); drm_encoder_cleanup(encoder); kfree(intel_output); }