/* * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller * * Copyright (C) 2004-2007 Texas Instruments * Copyright (C) 2008 Nokia Corporation * Contact: Felipe Balbi * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Current status: * - HS USB ULPI mode works. * - 3-pin mode support may be added in future. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Register defines */ #define MCPC_CTRL 0x30 #define MCPC_CTRL_RTSOL (1 << 7) #define MCPC_CTRL_EXTSWR (1 << 6) #define MCPC_CTRL_EXTSWC (1 << 5) #define MCPC_CTRL_VOICESW (1 << 4) #define MCPC_CTRL_OUT64K (1 << 3) #define MCPC_CTRL_RTSCTSSW (1 << 2) #define MCPC_CTRL_HS_UART (1 << 0) #define MCPC_IO_CTRL 0x33 #define MCPC_IO_CTRL_MICBIASEN (1 << 5) #define MCPC_IO_CTRL_CTS_NPU (1 << 4) #define MCPC_IO_CTRL_RXD_PU (1 << 3) #define MCPC_IO_CTRL_TXDTYP (1 << 2) #define MCPC_IO_CTRL_CTSTYP (1 << 1) #define MCPC_IO_CTRL_RTSTYP (1 << 0) #define MCPC_CTRL2 0x36 #define MCPC_CTRL2_MCPC_CK_EN (1 << 0) #define OTHER_FUNC_CTRL 0x80 #define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) #define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) #define OTHER_IFC_CTRL 0x83 #define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) #define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) #define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) #define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) #define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) #define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) #define OTHER_INT_EN_RISE 0x86 #define OTHER_INT_EN_FALL 0x89 #define OTHER_INT_STS 0x8C #define OTHER_INT_LATCH 0x8D #define OTHER_INT_VB_SESS_VLD (1 << 7) #define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ #define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ #define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ #define OTHER_INT_MANU (1 << 1) #define OTHER_INT_ABNORMAL_STRESS (1 << 0) #define ID_STATUS 0x96 #define ID_RES_FLOAT (1 << 4) #define ID_RES_440K (1 << 3) #define ID_RES_200K (1 << 2) #define ID_RES_102K (1 << 1) #define ID_RES_GND (1 << 0) #define POWER_CTRL 0xAC #define POWER_CTRL_OTG_ENAB (1 << 5) #define OTHER_IFC_CTRL2 0xAF #define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) #define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) #define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) #define REG_CTRL_EN 0xB2 #define REG_CTRL_ERROR 0xB5 #define ULPI_I2C_CONFLICT_INTEN (1 << 0) #define OTHER_FUNC_CTRL2 0xB8 #define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) /* following registers do not have separate _clr and _set registers */ #define VBUS_DEBOUNCE 0xC0 #define ID_DEBOUNCE 0xC1 #define VBAT_TIMER 0xD3 #define PHY_PWR_CTRL 0xFD #define PHY_PWR_PHYPWD (1 << 0) #define PHY_CLK_CTRL 0xFE #define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) #define PHY_CLK_CTRL_CLK32K_EN (1 << 1) #define REQ_PHY_DPLL_CLK (1 << 0) #define PHY_CLK_CTRL_STS 0xFF #define PHY_DPLL_CLK (1 << 0) /* In module TWL4030_MODULE_PM_MASTER */ #define STS_HW_CONDITIONS 0x0F /* In module TWL4030_MODULE_PM_RECEIVER */ #define VUSB_DEDICATED1 0x7D #define VUSB_DEDICATED2 0x7E #define VUSB1V5_DEV_GRP 0x71 #define VUSB1V5_TYPE 0x72 #define VUSB1V5_REMAP 0x73 #define VUSB1V8_DEV_GRP 0x74 #define VUSB1V8_TYPE 0x75 #define VUSB1V8_REMAP 0x76 #define VUSB3V1_DEV_GRP 0x77 #define VUSB3V1_TYPE 0x78 #define VUSB3V1_REMAP 0x79 /* In module TWL4030_MODULE_INTBR */ #define PMBR1 0x0D #define GPIO_USB_4PIN_ULPI_2430C (3 << 0) struct twl4030_usb { struct usb_phy otg; struct device *dev; /* TWL4030 internal USB regulator supplies */ struct regulator *usb1v5; struct regulator *usb1v8; struct regulator *usb3v1; /* for vbus reporting with irqs disabled */ spinlock_t lock; /* pin configuration */ enum twl4030_usb_mode usb_mode; int irq; u8 linkstat; bool vbus_supplied; u8 asleep; bool irq_enabled; }; /* internal define on top of container_of */ #define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg) /*-------------------------------------------------------------------------*/ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, u8 module, u8 data, u8 address) { u8 check; if ((twl_i2c_write_u8(module, data, address) >= 0) && (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", 1, module, address, check, data); /* Failed once: Try again */ if ((twl_i2c_write_u8(module, data, address) >= 0) && (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", 2, module, address, check, data); /* Failed again: Return error */ return -EBUSY; } #define twl4030_usb_write_verify(twl, address, data) \ twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address)) static inline int twl4030_usb_write(struct twl4030_usb *twl, u8 address, u8 data) { int ret = 0; ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address); if (ret < 0) dev_dbg(twl->dev, "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); return ret; } static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) { u8 data; int ret = 0; ret = twl_i2c_read_u8(module, &data, address); if (ret >= 0) ret = data; else dev_dbg(twl->dev, "TWL4030:readb[0x%x,0x%x] Error %d\n", module, address, ret); return ret; } static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) { return twl4030_readb(twl, TWL4030_MODULE_USB, address); } /*-------------------------------------------------------------------------*/ static inline int twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) { return twl4030_usb_write(twl, ULPI_SET(reg), bits); } static inline int twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) { return twl4030_usb_write(twl, ULPI_CLR(reg), bits); } /*-------------------------------------------------------------------------*/ static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl) { int status; int linkstat = USB_EVENT_NONE; twl->vbus_supplied = false; /* * For ID/VBUS sensing, see manual section 15.4.8 ... * except when using only battery backup power, two * comparators produce VBUS_PRES and ID_PRES signals, * which don't match docs elsewhere. But ... BIT(7) * and BIT(2) of STS_HW_CONDITIONS, respectively, do * seem to match up. If either is true the USB_PRES * signal is active, the OTG module is activated, and * its interrupt may be raised (may wake the system). */ status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, STS_HW_CONDITIONS); if (status < 0) dev_err(twl->dev, "USB link status err %d\n", status); else if (status & (BIT(7) | BIT(2))) { if (status & (BIT(7))) twl->vbus_supplied = true; if (status & BIT(2)) linkstat = USB_EVENT_ID; else linkstat = USB_EVENT_VBUS; } else linkstat = USB_EVENT_NONE; dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", status, status, linkstat); twl->otg.last_event = linkstat; /* REVISIT this assumes host and peripheral controllers * are registered, and that both are active... */ spin_lock_irq(&twl->lock); twl->linkstat = linkstat; if (linkstat == USB_EVENT_ID) { twl->otg.default_a = true; twl->otg.state = OTG_STATE_A_IDLE; } else { twl->otg.default_a = false; twl->otg.state = OTG_STATE_B_IDLE; } spin_unlock_irq(&twl->lock); return linkstat; } static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) { twl->usb_mode = mode; switch (mode) { case T2_USB_MODE_ULPI: twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, ULPI_IFC_CTRL_CARKITMODE); twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, ULPI_FUNC_CTRL_XCVRSEL_MASK | ULPI_FUNC_CTRL_OPMODE_MASK); break; case -1: /* FIXME: power on defaults */ break; default: dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", mode); break; }; } static void twl4030_i2c_access(struct twl4030_usb *twl, int on) { unsigned long timeout; int val = twl4030_usb_read(twl, PHY_CLK_CTRL); if (val >= 0) { if (on) { /* enable DPLL to access PHY registers over I2C */ val |= REQ_PHY_DPLL_CLK; WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, (u8)val) < 0); timeout = jiffies + HZ; while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & PHY_DPLL_CLK) && time_before(jiffies, timeout)) udelay(10); if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & PHY_DPLL_CLK)) dev_err(twl->dev, "Timeout setting T2 HSUSB " "PHY DPLL clock\n"); } else { /* let ULPI control the DPLL clock */ val &= ~REQ_PHY_DPLL_CLK; WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, (u8)val) < 0); } } } static void __twl4030_phy_power(struct twl4030_usb *twl, int on) { u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); if (on) pwr &= ~PHY_PWR_PHYPWD; else pwr |= PHY_PWR_PHYPWD; WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); } static void twl4030_phy_power(struct twl4030_usb *twl, int on) { if (on) { regulator_enable(twl->usb3v1); regulator_enable(twl->usb1v8); /* * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP * in twl4030) resets the VUSB_DEDICATED2 register. This reset * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to * SLEEP. We work around this by clearing the bit after usv3v1 * is re-activated. This ensures that VUSB3V1 is really active. */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, twl4030_usb_read(twl, PHY_CLK_CTRL) | (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); } else { __twl4030_phy_power(twl, 0); regulator_disable(twl->usb1v5); regulator_disable(twl->usb1v8); regulator_disable(twl->usb3v1); } } static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) { if (twl->asleep) return; twl4030_phy_power(twl, 0); twl->asleep = 1; dev_dbg(twl->dev, "%s\n", __func__); } static void __twl4030_phy_resume(struct twl4030_usb *twl) { twl4030_phy_power(twl, 1); twl4030_i2c_access(twl, 1); twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); } static void twl4030_phy_resume(struct twl4030_usb *twl) { if (!twl->asleep) return; __twl4030_phy_resume(twl); twl->asleep = 0; dev_dbg(twl->dev, "%s\n", __func__); } static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, TWL4030_PM_MASTER_PROTECT_KEY); twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, TWL4030_PM_MASTER_PROTECT_KEY); /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ /* input to VUSB3V1 LDO is from VBAT, not VBUS */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); /* Initialize 3.1V regulator */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); if (IS_ERR(twl->usb3v1)) return -ENODEV; twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); /* Initialize 1.5V regulator */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); if (IS_ERR(twl->usb1v5)) goto fail1; twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); /* Initialize 1.8V regulator */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); if (IS_ERR(twl->usb1v8)) goto fail2; twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, TWL4030_PM_MASTER_PROTECT_KEY); return 0; fail2: regulator_put(twl->usb1v5); twl->usb1v5 = NULL; fail1: regulator_put(twl->usb3v1); twl->usb3v1 = NULL; return -ENODEV; } static ssize_t twl4030_usb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) { struct twl4030_usb *twl = dev_get_drvdata(dev); unsigned long flags; int ret = -EINVAL; spin_lock_irqsave(&twl->lock, flags); ret = sprintf(buf, "%s\n", twl->vbus_supplied ? "on" : "off"); spin_unlock_irqrestore(&twl->lock, flags); return ret; } static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); static irqreturn_t twl4030_usb_irq(int irq, void *_twl) { struct twl4030_usb *twl = _twl; int status; status = twl4030_usb_linkstat(twl); if (status >= 0) { /* FIXME add a set_power() method so that B-devices can * configure the charger appropriately. It's not always * correct to consume VBUS power, and how much current to * consume is a function of the USB configuration chosen * by the host. * * REVISIT usb_gadget_vbus_connect(...) as needed, ditto * its disconnect() sibling, when changing to/from the * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ if (status == USB_EVENT_NONE) twl4030_phy_suspend(twl, 0); else twl4030_phy_resume(twl); atomic_notifier_call_chain(&twl->otg.notifier, status, twl->otg.gadget); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); return IRQ_HANDLED; } static void twl4030_usb_phy_init(struct twl4030_usb *twl) { int status; status = twl4030_usb_linkstat(twl); if (status >= 0) { if (status == USB_EVENT_NONE) { __twl4030_phy_power(twl, 0); twl->asleep = 1; } else { __twl4030_phy_resume(twl); twl->asleep = 0; } atomic_notifier_call_chain(&twl->otg.notifier, status, twl->otg.gadget); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); } static int twl4030_set_suspend(struct usb_phy *x, int suspend) { struct twl4030_usb *twl = xceiv_to_twl(x); if (suspend) twl4030_phy_suspend(twl, 1); else twl4030_phy_resume(twl); return 0; } static int twl4030_set_peripheral(struct usb_phy *x, struct usb_gadget *gadget) { struct twl4030_usb *twl; if (!x) return -ENODEV; twl = xceiv_to_twl(x); twl->otg.gadget = gadget; if (!gadget) twl->otg.state = OTG_STATE_UNDEFINED; return 0; } static int twl4030_set_host(struct usb_phy *x, struct usb_bus *host) { struct twl4030_usb *twl; if (!x) return -ENODEV; twl = xceiv_to_twl(x); twl->otg.host = host; if (!host) twl->otg.state = OTG_STATE_UNDEFINED; return 0; } static int __devinit twl4030_usb_probe(struct platform_device *pdev) { struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status, err; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); return -EINVAL; } twl = kzalloc(sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; twl->dev = &pdev->dev; twl->irq = platform_get_irq(pdev, 0); twl->otg.dev = twl->dev; twl->otg.label = "twl4030"; twl->otg.set_host = twl4030_set_host; twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; twl->vbus_supplied = false; twl->asleep = 1; /* init spinlock for workqueue */ spin_lock_init(&twl->lock); err = twl4030_usb_ldo_init(twl); if (err) { dev_err(&pdev->dev, "ldo init failed\n"); kfree(twl); return err; } otg_set_transceiver(&twl->otg); platform_set_drvdata(pdev, twl); if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. * * FIXME we actually shouldn't start enabling it until the * USB controller drivers have said they're ready, by calling * set_host() and/or set_peripheral() ... OTG_capable boards * need both handles, otherwise just one suffices. */ twl->irq_enabled = true; status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "twl4030_usb", twl); if (status < 0) { dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq, status); kfree(twl); return status; } /* Power down phy or make it work according to * current link state. */ twl4030_usb_phy_init(twl); dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; } static int __exit twl4030_usb_remove(struct platform_device *pdev) { struct twl4030_usb *twl = platform_get_drvdata(pdev); int val; free_irq(twl->irq, twl); device_remove_file(twl->dev, &dev_attr_vbus); /* set transceiver mode to power on defaults */ twl4030_usb_set_mode(twl, -1); /* autogate 60MHz ULPI clock, * clear dpll clock request for i2c access, * disable 32KHz */ val = twl4030_usb_read(twl, PHY_CLK_CTRL); if (val >= 0) { val |= PHY_CLK_CTRL_CLOCKGATING_EN; val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); } /* disable complete OTG block */ twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); if (!twl->asleep) twl4030_phy_power(twl, 0); regulator_put(twl->usb1v5); regulator_put(twl->usb1v8); regulator_put(twl->usb3v1); kfree(twl); return 0; } static struct platform_driver twl4030_usb_driver = { .probe = twl4030_usb_probe, .remove = __exit_p(twl4030_usb_remove), .driver = { .name = "twl4030_usb", .owner = THIS_MODULE, }, }; static int __init twl4030_usb_init(void) { return platform_driver_register(&twl4030_usb_driver); } subsys_initcall(twl4030_usb_init); static void __exit twl4030_usb_exit(void) { platform_driver_unregister(&twl4030_usb_driver); } module_exit(twl4030_usb_exit); MODULE_ALIAS("platform:twl4030_usb"); MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); MODULE_LICENSE("GPL");