/* * Common base for NXP LPC18xx and LPC43xx devices. * * Copyright 2015 Joachim Eastwood * * This code is released using a dual license strategy: BSD/GPL * You can choose the licence that better fits your requirements. * * Released under the terms of 3-clause BSD License * Released under the terms of GNU General Public License Version 2.0 * */ #include "armv7-m.dtsi" #include "dt-bindings/clock/lpc18xx-cgu.h" #include "dt-bindings/clock/lpc18xx-ccu.h" #define LPC_PIN(port, pin) (0x##port * 32 + pin) #define LPC_GPIO(port, pin) (port * 32 + pin) / { cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,cortex-m3"; device_type = "cpu"; reg = <0x0>; clocks = <&ccu1 CLK_CPU_CORE>; }; }; clocks { xtal: xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <12000000>; }; xtal32: xtal32 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; enet_rx_clk: enet_rx_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; clock-output-names = "enet_rx_clk"; }; enet_tx_clk: enet_tx_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; clock-output-names = "enet_tx_clk"; }; gp_clkin: gp_clkin { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; clock-output-names = "gp_clkin"; }; }; soc { dmac: dma-controller@40002000 { compatible = "arm,pl080", "arm,primecell"; arm,primecell-periphid = <0x00041080>; reg = <0x40002000 0x1000>; interrupts = <2>; clocks = <&ccu1 CLK_CPU_DMA>; clock-names = "apb_pclk"; resets = <&rgu 19>; #dma-cells = <2>; dma-channels = <8>; dma-requests = <16>; lli-bus-interface-ahb1; lli-bus-interface-ahb2; mem-bus-interface-ahb1; mem-bus-interface-ahb2; memcpy-burst-size = <256>; memcpy-bus-width = <32>; }; spifi: flash-controller@40003000 { compatible = "nxp,lpc1773-spifi"; reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; reg-names = "spifi", "flash"; interrupts = <30>; clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; clock-names = "spifi", "reg"; resets = <&rgu 53>; status = "disabled"; }; mmcsd: mmcsd@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; interrupts = <6>; num-slots = <1>; clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; clock-names = "ciu", "biu"; status = "disabled"; }; usb0: ehci@40006100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40006100 0x100>; interrupts = <8>; clocks = <&ccu1 CLK_CPU_USB0>; phys = <&usb0_otg_phy>; phy-names = "usb"; has-transaction-translator; status = "disabled"; }; usb1: ehci@40007100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40007100 0x100>; interrupts = <9>; clocks = <&ccu1 CLK_CPU_USB1>; status = "disabled"; }; emc: memory-controller@40005000 { compatible = "arm,pl172", "arm,primecell"; reg = <0x40005000 0x1000>; clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; clock-names = "mpmcclk", "apb_pclk"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x1c000000 0x1000000 1 0 0x1d000000 0x1000000 2 0 0x1e000000 0x1000000 3 0 0x1f000000 0x1000000>; status = "disabled"; }; lcdc: lcd-controller@40008000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x40008000 0x1000>; interrupts = <7>; interrupt-names = "combined"; clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; clock-names = "clcdclk", "apb_pclk"; status = "disabled"; }; mac: ethernet@40010000 { compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; reg = <0x40010000 0x2000>; interrupts = <5>; interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; status = "disabled"; }; creg: syscon@40043000 { compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; reg = <0x40043000 0x1000>; clocks = <&ccu1 CLK_CPU_CREG>; usb0_otg_phy: phy@004 { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; }; cgu: clock-controller@40050000 { compatible = "nxp,lpc1850-cgu"; reg = <0x40050000 0x1000>; #clock-cells = <1>; clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; }; ccu1: clock-controller@40051000 { compatible = "nxp,lpc1850-ccu"; reg = <0x40051000 0x1000>; #clock-cells = <1>; clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; clock-names = "base_apb3_clk", "base_apb1_clk", "base_spifi_clk", "base_cpu_clk", "base_periph_clk", "base_usb0_clk", "base_usb1_clk", "base_spi_clk"; }; ccu2: clock-controller@40052000 { compatible = "nxp,lpc1850-ccu"; reg = <0x40052000 0x1000>; #clock-cells = <1>; clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; clock-names = "base_audio_clk", "base_uart3_clk", "base_uart2_clk", "base_uart1_clk", "base_uart0_clk", "base_ssp1_clk", "base_ssp0_clk", "base_sdio_clk"; }; rgu: reset-controller@40053000 { compatible = "nxp,lpc1850-rgu"; reg = <0x40053000 0x1000>; clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; clock-names = "delay", "reg"; #reset-cells = <1>; }; uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; reg-shift = <2>; interrupts = <24>; clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; clock-names = "uartclk", "reg"; status = "disabled"; }; uart1: serial@40082000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40082000 0x1000>; reg-shift = <2>; interrupts = <25>; clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; clock-names = "uartclk", "reg"; status = "disabled"; }; ssp0: spi@40083000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x40083000 0x1000>; interrupts = <22>; clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; timer0: timer@40084000 { compatible = "nxp,lpc3220-timer"; reg = <0x40084000 0x1000>; interrupts = <12>; clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; }; timer1: timer@40085000 { compatible = "nxp,lpc3220-timer"; reg = <0x40085000 0x1000>; interrupts = <13>; clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; }; pinctrl: pinctrl@40086000 { compatible = "nxp,lpc1850-scu"; reg = <0x40086000 0x1000>; clocks = <&ccu1 CLK_CPU_SCU>; }; can1: can@400a4000 { compatible = "bosch,c_can"; reg = <0x400a4000 0x1000>; interrupts = <43>; clocks = <&ccu1 CLK_APB1_CAN1>; status = "disabled"; }; uart2: serial@400c1000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x400c1000 0x1000>; reg-shift = <2>; interrupts = <26>; clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; clock-names = "uartclk", "reg"; status = "disabled"; }; uart3: serial@400c2000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x400c2000 0x1000>; reg-shift = <2>; interrupts = <27>; clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; clock-names = "uartclk", "reg"; status = "disabled"; }; timer2: timer@400c3000 { compatible = "nxp,lpc3220-timer"; reg = <0x400c3000 0x1000>; interrupts = <14>; clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; }; timer3: timer@400c4000 { compatible = "nxp,lpc3220-timer"; reg = <0x400c4000 0x1000>; interrupts = <15>; clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; }; ssp1: spi@400c5000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x400c5000 0x1000>; interrupts = <23>; clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; can0: can@400e2000 { compatible = "bosch,c_can"; reg = <0x400e2000 0x1000>; interrupts = <51>; clocks = <&ccu1 CLK_APB3_CAN0>; status = "disabled"; }; gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; reg = <0x400f4000 0x4000>; clocks = <&ccu1 CLK_CPU_GPIO>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, <&pinctrl LPC_GPIO(0,4) LPC_PIN(1,0) 1>, <&pinctrl LPC_GPIO(0,8) LPC_PIN(1,1) 4>, <&pinctrl LPC_GPIO(1,8) LPC_PIN(1,5) 2>, <&pinctrl LPC_GPIO(1,0) LPC_PIN(1,7) 8>, <&pinctrl LPC_GPIO(0,2) LPC_PIN(1,15) 2>, <&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>, <&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>, <&pinctrl LPC_GPIO(5,0) LPC_PIN(2,0) 7>, <&pinctrl LPC_GPIO(0,7) LPC_PIN(2,7) 1>, <&pinctrl LPC_GPIO(5,7) LPC_PIN(2,8) 1>, <&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9) 1>, <&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>, <&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>, <&pinctrl LPC_GPIO(5,8) LPC_PIN(3,1) 2>, <&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4) 2>, <&pinctrl LPC_GPIO(0,6) LPC_PIN(3,6) 1>, <&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7) 2>, <&pinctrl LPC_GPIO(2,0) LPC_PIN(4,0) 7>, <&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8) 3>, <&pinctrl LPC_GPIO(2,9) LPC_PIN(5,0) 7>, <&pinctrl LPC_GPIO(2,7) LPC_PIN(5,7) 1>, <&pinctrl LPC_GPIO(3,0) LPC_PIN(6,1) 5>, <&pinctrl LPC_GPIO(0,5) LPC_PIN(6,6) 1>, <&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7) 2>, <&pinctrl LPC_GPIO(3,5) LPC_PIN(6,9) 3>, <&pinctrl LPC_GPIO(2,8) LPC_PIN(6,12) 1>, <&pinctrl LPC_GPIO(3,8) LPC_PIN(7,0) 8>, <&pinctrl LPC_GPIO(4,0) LPC_PIN(8,0) 8>, <&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0) 4>, <&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4) 2>, <&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6) 1>, <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>, <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>, <&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0) 7>, <&pinctrl LPC_GPIO(6,0) LPC_PIN(c,1) 14>, <&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>, <&pinctrl LPC_GPIO(7,0) LPC_PIN(e,0) 16>, <&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1) 3>, <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; }; }; };