/****************************************************************************** * * Module Name: evgpeblk - GPE block creation and initialization. * *****************************************************************************/ /* * Copyright (C) 2000 - 2010, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "accommon.h" #include "acevents.h" #include "acnamesp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeblk") /* Local prototypes */ static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, u32 interrupt_number); static acpi_status acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block); /******************************************************************************* * * FUNCTION: acpi_ev_install_gpe_block * * PARAMETERS: gpe_block - New GPE block * interrupt_number - Xrupt to be associated with this * GPE block * * RETURN: Status * * DESCRIPTION: Install new GPE block with mutex support * ******************************************************************************/ static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, u32 interrupt_number) { struct acpi_gpe_block_info *next_gpe_block; struct acpi_gpe_xrupt_info *gpe_xrupt_block; acpi_status status; acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(ev_install_gpe_block); status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block(interrupt_number); if (!gpe_xrupt_block) { status = AE_NO_MEMORY; goto unlock_and_exit; } /* Install the new block at the end of the list with lock */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); if (gpe_xrupt_block->gpe_block_list_head) { next_gpe_block = gpe_xrupt_block->gpe_block_list_head; while (next_gpe_block->next) { next_gpe_block = next_gpe_block->next; } next_gpe_block->next = gpe_block; gpe_block->previous = next_gpe_block; } else { gpe_xrupt_block->gpe_block_list_head = gpe_block; } gpe_block->xrupt_block = gpe_xrupt_block; acpi_os_release_lock(acpi_gbl_gpe_lock, flags); unlock_and_exit: status = acpi_ut_release_mutex(ACPI_MTX_EVENTS); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_delete_gpe_block * * PARAMETERS: gpe_block - Existing GPE block * * RETURN: Status * * DESCRIPTION: Remove a GPE block * ******************************************************************************/ acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block) { acpi_status status; acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(ev_install_gpe_block); status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Disable all GPEs in this block */ status = acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block, NULL); if (!gpe_block->previous && !gpe_block->next) { /* This is the last gpe_block on this interrupt */ status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } } else { /* Remove the block on this interrupt with lock */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); if (gpe_block->previous) { gpe_block->previous->next = gpe_block->next; } else { gpe_block->xrupt_block->gpe_block_list_head = gpe_block->next; } if (gpe_block->next) { gpe_block->next->previous = gpe_block->previous; } acpi_os_release_lock(acpi_gbl_gpe_lock, flags); } acpi_current_gpe_count -= gpe_block->gpe_count; /* Free the gpe_block */ ACPI_FREE(gpe_block->register_info); ACPI_FREE(gpe_block->event_info); ACPI_FREE(gpe_block); unlock_and_exit: status = acpi_ut_release_mutex(ACPI_MTX_EVENTS); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_create_gpe_info_blocks * * PARAMETERS: gpe_block - New GPE block * * RETURN: Status * * DESCRIPTION: Create the register_info and event_info blocks for this GPE block * ******************************************************************************/ static acpi_status acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block) { struct acpi_gpe_register_info *gpe_register_info = NULL; struct acpi_gpe_event_info *gpe_event_info = NULL; struct acpi_gpe_event_info *this_event; struct acpi_gpe_register_info *this_register; u32 i; u32 j; acpi_status status; ACPI_FUNCTION_TRACE(ev_create_gpe_info_blocks); /* Allocate the GPE register information block */ gpe_register_info = ACPI_ALLOCATE_ZEROED((acpi_size) gpe_block-> register_count * sizeof(struct acpi_gpe_register_info)); if (!gpe_register_info) { ACPI_ERROR((AE_INFO, "Could not allocate the GpeRegisterInfo table")); return_ACPI_STATUS(AE_NO_MEMORY); } /* * Allocate the GPE event_info block. There are eight distinct GPEs * per register. Initialization to zeros is sufficient. */ gpe_event_info = ACPI_ALLOCATE_ZEROED((acpi_size) gpe_block->gpe_count * sizeof(struct acpi_gpe_event_info)); if (!gpe_event_info) { ACPI_ERROR((AE_INFO, "Could not allocate the GpeEventInfo table")); status = AE_NO_MEMORY; goto error_exit; } /* Save the new Info arrays in the GPE block */ gpe_block->register_info = gpe_register_info; gpe_block->event_info = gpe_event_info; /* * Initialize the GPE Register and Event structures. A goal of these * tables is to hide the fact that there are two separate GPE register * sets in a given GPE hardware block, the status registers occupy the * first half, and the enable registers occupy the second half. */ this_register = gpe_register_info; this_event = gpe_event_info; for (i = 0; i < gpe_block->register_count; i++) { /* Init the register_info for this GPE register (8 GPEs) */ this_register->base_gpe_number = (u8) (gpe_block->block_base_number + (i * ACPI_GPE_REGISTER_WIDTH)); this_register->status_address.address = gpe_block->block_address.address + i; this_register->enable_address.address = gpe_block->block_address.address + i + gpe_block->register_count; this_register->status_address.space_id = gpe_block->block_address.space_id; this_register->enable_address.space_id = gpe_block->block_address.space_id; this_register->status_address.bit_width = ACPI_GPE_REGISTER_WIDTH; this_register->enable_address.bit_width = ACPI_GPE_REGISTER_WIDTH; this_register->status_address.bit_offset = 0; this_register->enable_address.bit_offset = 0; /* Init the event_info for each GPE within this register */ for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { this_event->gpe_number = (u8) (this_register->base_gpe_number + j); this_event->register_info = this_register; this_event++; } /* Disable all GPEs within this register */ status = acpi_hw_write(0x00, &this_register->enable_address); if (ACPI_FAILURE(status)) { goto error_exit; } /* Clear any pending GPE events within this register */ status = acpi_hw_write(0xFF, &this_register->status_address); if (ACPI_FAILURE(status)) { goto error_exit; } this_register++; } return_ACPI_STATUS(AE_OK); error_exit: if (gpe_register_info) { ACPI_FREE(gpe_register_info); } if (gpe_event_info) { ACPI_FREE(gpe_event_info); } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_create_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE block * gpe_block_address - Address and space_iD * register_count - Number of GPE register pairs in the block * gpe_block_base_number - Starting GPE number for the block * interrupt_number - H/W interrupt for the block * return_gpe_block - Where the new block descriptor is returned * * RETURN: Status * * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within * the block are disabled at exit. * Note: Assumes namespace is locked. * ******************************************************************************/ acpi_status acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_generic_address *gpe_block_address, u32 register_count, u8 gpe_block_base_number, u32 interrupt_number, struct acpi_gpe_block_info **return_gpe_block) { acpi_status status; struct acpi_gpe_block_info *gpe_block; struct acpi_gpe_walk_info walk_info; ACPI_FUNCTION_TRACE(ev_create_gpe_block); if (!register_count) { return_ACPI_STATUS(AE_OK); } /* Allocate a new GPE block */ gpe_block = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_block_info)); if (!gpe_block) { return_ACPI_STATUS(AE_NO_MEMORY); } /* Initialize the new GPE block */ gpe_block->node = gpe_device; gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH); gpe_block->register_count = register_count; gpe_block->block_base_number = gpe_block_base_number; gpe_block->initialized = FALSE; ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address, sizeof(struct acpi_generic_address)); /* * Create the register_info and event_info sub-structures * Note: disables and clears all GPEs in the block */ status = acpi_ev_create_gpe_info_blocks(gpe_block); if (ACPI_FAILURE(status)) { ACPI_FREE(gpe_block); return_ACPI_STATUS(status); } /* Install the new block in the global lists */ status = acpi_ev_install_gpe_block(gpe_block, interrupt_number); if (ACPI_FAILURE(status)) { ACPI_FREE(gpe_block); return_ACPI_STATUS(status); } acpi_gbl_all_gpes_initialized = FALSE; /* Find all GPE methods (_Lxx or_Exx) for this block */ walk_info.gpe_block = gpe_block; walk_info.gpe_device = gpe_device; walk_info.execute_by_owner_id = FALSE; status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device, ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK, acpi_ev_match_gpe_method, NULL, &walk_info, NULL); /* Return the new block */ if (return_gpe_block) { (*return_gpe_block) = gpe_block; } ACPI_DEBUG_PRINT((ACPI_DB_INIT, "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n", (u32) gpe_block->block_base_number, (u32) (gpe_block->block_base_number + (gpe_block->gpe_count - 1)), gpe_device->name.ascii, gpe_block->register_count, interrupt_number)); /* Update global count of currently available GPEs */ acpi_current_gpe_count += gpe_block->gpe_count; return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ev_initialize_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE block * gpe_block - Gpe Block info * * RETURN: Status * * DESCRIPTION: Initialize and enable a GPE block. First find and run any * _PRT methods associated with the block, then enable the * appropriate GPEs. * Note: Assumes namespace is locked. * ******************************************************************************/ acpi_status acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *ignored) { acpi_status status; struct acpi_gpe_event_info *gpe_event_info; u32 gpe_enabled_count; u32 gpe_index; u32 i; u32 j; ACPI_FUNCTION_TRACE(ev_initialize_gpe_block); /* * Ignore a null GPE block (e.g., if no GPE block 1 exists) and * GPE blocks that have been initialized already. */ if (!gpe_block || gpe_block->initialized) { return_ACPI_STATUS(AE_OK); } /* * Enable all GPEs that have a corresponding method and have the * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block must * be enabled via the acpi_enable_gpe() interface. */ gpe_enabled_count = 0; for (i = 0; i < gpe_block->register_count; i++) { for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { /* Get the info block for this particular GPE */ gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; /* Ignore GPEs that have no corresponding _Lxx/_Exx method */ if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) || (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { continue; } status = acpi_ev_add_gpe_reference(gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Could not enable GPE 0x%02X", gpe_index + gpe_block->block_base_number)); continue; } gpe_enabled_count++; } } if (gpe_enabled_count) { ACPI_DEBUG_PRINT((ACPI_DB_INIT, "Enabled %u GPEs in this block\n", gpe_enabled_count)); } gpe_block->initialized = TRUE; return_ACPI_STATUS(AE_OK); }