/* * Definitions for Compaq iPAQ H3100 and H3600 handheld computers * * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks) * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #ifndef _INCLUDE_H3XXX_H_ #define _INCLUDE_H3XXX_H_ #include "hardware.h" /* Gives GPIO_MAX */ /* Physical memory regions corresponding to chip selects */ #define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) #define H3600_BANK_2_PHYS SA1100_CS2_PHYS #define H3600_BANK_4_PHYS SA1100_CS4_PHYS /* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */ #define H3600_EGPIO_VIRT 0xf0000000 #define H3600_BANK_2_VIRT 0xf1000000 #define H3600_BANK_4_VIRT 0xf3800000 /* * gpiolib numbers for all iPAQs */ #define H3XXX_GPIO_PWR_BUTTON 0 #define H3XXX_GPIO_PCMCIA_CD1 10 #define H3XXX_GPIO_PCMCIA_IRQ1 11 #define H3XXX_GPIO_PCMCIA_CD0 17 #define H3XXX_GPIO_ACTION_BUTTON 18 #define H3XXX_GPIO_SYS_CLK 19 #define H3XXX_GPIO_PCMCIA_IRQ0 21 #define H3XXX_GPIO_COM_DCD 23 #define H3XXX_GPIO_OPTION 24 #define H3XXX_GPIO_COM_CTS 25 #define H3XXX_GPIO_COM_RTS 26 /* machine-specific gpios */ #define H3100_GPIO_BT_ON 2 #define H3100_GPIO_QMUTE 4 #define H3100_GPIO_LCD_3V_ON 5 #define H3100_GPIO_AUD_ON 6 #define H3100_GPIO_AUD_PWR_ON 7 #define H3100_GPIO_IR_ON 8 #define H3100_GPIO_IR_FSEL 9 #define H3600_GPIO_CLK_SET0 12 /* audio sample rate clock generator */ #define H3600_GPIO_CLK_SET1 13 #define H3600_GPIO_SOFT_RESET 20 /* also known as BATT_FAULT */ #define H3600_GPIO_OPT_LOCK 22 #define H3600_GPIO_OPT_DET 27 /* H3100 / 3600 EGPIO pins */ #define H3XXX_EGPIO_BASE (GPIO_MAX + 1) #define H3XXX_EGPIO_VPP_ON (H3XXX_EGPIO_BASE + 0) #define H3XXX_EGPIO_CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */ #define H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */ #define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. */ #define H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */ #define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */ #define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */ #define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */ /* H3600 only EGPIO pins */ #define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */ #define H3600_EGPIO_IR_ON (H3XXX_EGPIO_BASE + 9) /* apply power to IR module. active high. */ #define H3600_EGPIO_AUD_AMP_ON (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp. active high. */ #define H3600_EGPIO_AUD_PWR_ON (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit. active high. */ #define H3600_EGPIO_QMUTE (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341. active high. */ #define H3600_EGPIO_IR_FSEL (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */ #define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */ #define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */ void __init h3xxx_map_io(void); void __init h3xxx_mach_init(void); #endif /* _INCLUDE_H3XXX_H_ */