/****************************************************************************** * * Module Name: osunixxf - UNIX OSL interfaces * *****************************************************************************/ /* * Copyright (C) 2000 - 2014, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ /* * These interfaces are required in order to compile the ASL compiler and the * various ACPICA tools under Linux or other Unix-like system. */ #include #include "accommon.h" #include "amlcode.h" #include "acparser.h" #include "acdebug.h" #include #include #include #include #include #include #include #include #define _COMPONENT ACPI_OS_SERVICES ACPI_MODULE_NAME("osunixxf") u8 acpi_gbl_debug_timeout = FALSE; /* Upcalls to acpi_exec */ void ae_table_override(struct acpi_table_header *existing_table, struct acpi_table_header **new_table); typedef void *(*PTHREAD_CALLBACK) (void *); /* Buffer used by acpi_os_vprintf */ #define ACPI_VPRINTF_BUFFER_SIZE 512 #define _ASCII_NEWLINE '\n' /* Terminal support for acpi_exec only */ #ifdef ACPI_EXEC_APP #include struct termios original_term_attributes; int term_attributes_were_set = 0; acpi_status acpi_ut_read_line(char *buffer, u32 buffer_length, u32 *bytes_read); static void os_enter_line_edit_mode(void); static void os_exit_line_edit_mode(void); /****************************************************************************** * * FUNCTION: os_enter_line_edit_mode, os_exit_line_edit_mode * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Enter/Exit the raw character input mode for the terminal. * * Interactive line-editing support for the AML debugger. Used with the * common/acgetline module. * * readline() is not used because of non-portability. It is not available * on all systems, and if it is, often the package must be manually installed. * * Therefore, we use the POSIX tcgetattr/tcsetattr and do the minimal line * editing that we need in acpi_os_get_line. * * If the POSIX tcgetattr/tcsetattr interfaces are unavailable, these * calls will also work: * For os_enter_line_edit_mode: system ("stty cbreak -echo") * For os_exit_line_edit_mode: system ("stty cooked echo") * *****************************************************************************/ static void os_enter_line_edit_mode(void) { struct termios local_term_attributes; /* Get and keep the original attributes */ if (tcgetattr(STDIN_FILENO, &original_term_attributes)) { fprintf(stderr, "Could not get terminal attributes!\n"); return; } /* Set the new attributes to enable raw character input */ memcpy(&local_term_attributes, &original_term_attributes, sizeof(struct termios)); local_term_attributes.c_lflag &= ~(ICANON | ECHO); local_term_attributes.c_cc[VMIN] = 1; local_term_attributes.c_cc[VTIME] = 0; if (tcsetattr(STDIN_FILENO, TCSANOW, &local_term_attributes)) { fprintf(stderr, "Could not set terminal attributes!\n"); return; } term_attributes_were_set = 1; } static void os_exit_line_edit_mode(void) { if (!term_attributes_were_set) { return; } /* Set terminal attributes back to the original values */ if (tcsetattr(STDIN_FILENO, TCSANOW, &original_term_attributes)) { fprintf(stderr, "Could not restore terminal attributes!\n"); } } #else /* These functions are not needed for other ACPICA utilities */ #define os_enter_line_edit_mode() #define os_exit_line_edit_mode() #endif /****************************************************************************** * * FUNCTION: acpi_os_initialize, acpi_os_terminate * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Initialize and terminate this module. * *****************************************************************************/ acpi_status acpi_os_initialize(void) { acpi_gbl_output_file = stdout; os_enter_line_edit_mode(); return (AE_OK); } acpi_status acpi_os_terminate(void) { os_exit_line_edit_mode(); return (AE_OK); } #ifndef ACPI_USE_NATIVE_RSDP_POINTER /****************************************************************************** * * FUNCTION: acpi_os_get_root_pointer * * PARAMETERS: None * * RETURN: RSDP physical address * * DESCRIPTION: Gets the ACPI root pointer (RSDP) * *****************************************************************************/ acpi_physical_address acpi_os_get_root_pointer(void) { return (0); } #endif /****************************************************************************** * * FUNCTION: acpi_os_predefined_override * * PARAMETERS: init_val - Initial value of the predefined object * new_val - The new value for the object * * RETURN: Status, pointer to value. Null pointer returned if not * overriding. * * DESCRIPTION: Allow the OS to override predefined names * *****************************************************************************/ acpi_status acpi_os_predefined_override(const struct acpi_predefined_names * init_val, acpi_string * new_val) { if (!init_val || !new_val) { return (AE_BAD_PARAMETER); } *new_val = NULL; return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_table_override * * PARAMETERS: existing_table - Header of current table (probably * firmware) * new_table - Where an entire new table is returned. * * RETURN: Status, pointer to new table. Null pointer returned if no * table is available to override * * DESCRIPTION: Return a different version of a table if one is available * *****************************************************************************/ acpi_status acpi_os_table_override(struct acpi_table_header * existing_table, struct acpi_table_header ** new_table) { if (!existing_table || !new_table) { return (AE_BAD_PARAMETER); } *new_table = NULL; #ifdef ACPI_EXEC_APP ae_table_override(existing_table, new_table); return (AE_OK); #else return (AE_NO_ACPI_TABLES); #endif } /****************************************************************************** * * FUNCTION: acpi_os_physical_table_override * * PARAMETERS: existing_table - Header of current table (probably firmware) * new_address - Where new table address is returned * (Physical address) * new_table_length - Where new table length is returned * * RETURN: Status, address/length of new table. Null pointer returned * if no table is available to override. * * DESCRIPTION: Returns AE_SUPPORT, function not used in user space. * *****************************************************************************/ acpi_status acpi_os_physical_table_override(struct acpi_table_header * existing_table, acpi_physical_address * new_address, u32 *new_table_length) { return (AE_SUPPORT); } /****************************************************************************** * * FUNCTION: acpi_os_redirect_output * * PARAMETERS: destination - An open file handle/pointer * * RETURN: None * * DESCRIPTION: Causes redirect of acpi_os_printf and acpi_os_vprintf * *****************************************************************************/ void acpi_os_redirect_output(void *destination) { acpi_gbl_output_file = destination; } /****************************************************************************** * * FUNCTION: acpi_os_printf * * PARAMETERS: fmt, ... - Standard printf format * * RETURN: None * * DESCRIPTION: Formatted output. Note: very similar to acpi_os_vprintf * (performance), changes should be tracked in both functions. * *****************************************************************************/ void ACPI_INTERNAL_VAR_XFACE acpi_os_printf(const char *fmt, ...) { va_list args; u8 flags; flags = acpi_gbl_db_output_flags; if (flags & ACPI_DB_REDIRECTABLE_OUTPUT) { /* Output is directable to either a file (if open) or the console */ if (acpi_gbl_debug_file) { /* Output file is open, send the output there */ va_start(args, fmt); vfprintf(acpi_gbl_debug_file, fmt, args); va_end(args); } else { /* No redirection, send output to console (once only!) */ flags |= ACPI_DB_CONSOLE_OUTPUT; } } if (flags & ACPI_DB_CONSOLE_OUTPUT) { va_start(args, fmt); vfprintf(acpi_gbl_output_file, fmt, args); va_end(args); } } /****************************************************************************** * * FUNCTION: acpi_os_vprintf * * PARAMETERS: fmt - Standard printf format * args - Argument list * * RETURN: None * * DESCRIPTION: Formatted output with argument list pointer. Note: very * similar to acpi_os_printf, changes should be tracked in both * functions. * *****************************************************************************/ void acpi_os_vprintf(const char *fmt, va_list args) { u8 flags; char buffer[ACPI_VPRINTF_BUFFER_SIZE]; /* * We build the output string in a local buffer because we may be * outputting the buffer twice. Using vfprintf is problematic because * some implementations modify the args pointer/structure during * execution. Thus, we use the local buffer for portability. * * Note: Since this module is intended for use by the various ACPICA * utilities/applications, we can safely declare the buffer on the stack. * Also, This function is used for relatively small error messages only. */ vsnprintf(buffer, ACPI_VPRINTF_BUFFER_SIZE, fmt, args); flags = acpi_gbl_db_output_flags; if (flags & ACPI_DB_REDIRECTABLE_OUTPUT) { /* Output is directable to either a file (if open) or the console */ if (acpi_gbl_debug_file) { /* Output file is open, send the output there */ fputs(buffer, acpi_gbl_debug_file); } else { /* No redirection, send output to console (once only!) */ flags |= ACPI_DB_CONSOLE_OUTPUT; } } if (flags & ACPI_DB_CONSOLE_OUTPUT) { fputs(buffer, acpi_gbl_output_file); } } #ifndef ACPI_EXEC_APP /****************************************************************************** * * FUNCTION: acpi_os_get_line * * PARAMETERS: buffer - Where to return the command line * buffer_length - Maximum length of Buffer * bytes_read - Where the actual byte count is returned * * RETURN: Status and actual bytes read * * DESCRIPTION: Get the next input line from the terminal. NOTE: For the * acpi_exec utility, we use the acgetline module instead to * provide line-editing and history support. * *****************************************************************************/ acpi_status acpi_os_get_line(char *buffer, u32 buffer_length, u32 *bytes_read) { int input_char; u32 end_of_line; /* Standard acpi_os_get_line for all utilities except acpi_exec */ for (end_of_line = 0;; end_of_line++) { if (end_of_line >= buffer_length) { return (AE_BUFFER_OVERFLOW); } if ((input_char = getchar()) == EOF) { return (AE_ERROR); } if (!input_char || input_char == _ASCII_NEWLINE) { break; } buffer[end_of_line] = (char)input_char; } /* Null terminate the buffer */ buffer[end_of_line] = 0; /* Return the number of bytes in the string */ if (bytes_read) { *bytes_read = end_of_line; } return (AE_OK); } #endif #ifndef ACPI_USE_NATIVE_MEMORY_MAPPING /****************************************************************************** * * FUNCTION: acpi_os_map_memory * * PARAMETERS: where - Physical address of memory to be mapped * length - How much memory to map * * RETURN: Pointer to mapped memory. Null on error. * * DESCRIPTION: Map physical memory into caller's address space * *****************************************************************************/ void *acpi_os_map_memory(acpi_physical_address where, acpi_size length) { return (ACPI_TO_POINTER((acpi_size) where)); } /****************************************************************************** * * FUNCTION: acpi_os_unmap_memory * * PARAMETERS: where - Logical address of memory to be unmapped * length - How much memory to unmap * * RETURN: None. * * DESCRIPTION: Delete a previously created mapping. Where and Length must * correspond to a previous mapping exactly. * *****************************************************************************/ void acpi_os_unmap_memory(void *where, acpi_size length) { return; } #endif /****************************************************************************** * * FUNCTION: acpi_os_allocate * * PARAMETERS: size - Amount to allocate, in bytes * * RETURN: Pointer to the new allocation. Null on error. * * DESCRIPTION: Allocate memory. Algorithm is dependent on the OS. * *****************************************************************************/ void *acpi_os_allocate(acpi_size size) { void *mem; mem = (void *)malloc((size_t) size); return (mem); } #ifdef USE_NATIVE_ALLOCATE_ZEROED /****************************************************************************** * * FUNCTION: acpi_os_allocate_zeroed * * PARAMETERS: size - Amount to allocate, in bytes * * RETURN: Pointer to the new allocation. Null on error. * * DESCRIPTION: Allocate and zero memory. Algorithm is dependent on the OS. * *****************************************************************************/ void *acpi_os_allocate_zeroed(acpi_size size) { void *mem; mem = (void *)calloc(1, (size_t) size); return (mem); } #endif /****************************************************************************** * * FUNCTION: acpi_os_free * * PARAMETERS: mem - Pointer to previously allocated memory * * RETURN: None. * * DESCRIPTION: Free memory allocated via acpi_os_allocate * *****************************************************************************/ void acpi_os_free(void *mem) { free(mem); } #ifdef ACPI_SINGLE_THREADED /****************************************************************************** * * FUNCTION: Semaphore stub functions * * DESCRIPTION: Stub functions used for single-thread applications that do * not require semaphore synchronization. Full implementations * of these functions appear after the stubs. * *****************************************************************************/ acpi_status acpi_os_create_semaphore(u32 max_units, u32 initial_units, acpi_handle * out_handle) { *out_handle = (acpi_handle) 1; return (AE_OK); } acpi_status acpi_os_delete_semaphore(acpi_handle handle) { return (AE_OK); } acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout) { return (AE_OK); } acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units) { return (AE_OK); } #else /****************************************************************************** * * FUNCTION: acpi_os_create_semaphore * * PARAMETERS: initial_units - Units to be assigned to the new semaphore * out_handle - Where a handle will be returned * * RETURN: Status * * DESCRIPTION: Create an OS semaphore * *****************************************************************************/ acpi_status acpi_os_create_semaphore(u32 max_units, u32 initial_units, acpi_handle * out_handle) { sem_t *sem; if (!out_handle) { return (AE_BAD_PARAMETER); } #ifdef __APPLE__ { char *semaphore_name = tmpnam(NULL); sem = sem_open(semaphore_name, O_EXCL | O_CREAT, 0755, initial_units); if (!sem) { return (AE_NO_MEMORY); } sem_unlink(semaphore_name); /* This just deletes the name */ } #else sem = acpi_os_allocate(sizeof(sem_t)); if (!sem) { return (AE_NO_MEMORY); } if (sem_init(sem, 0, initial_units) == -1) { acpi_os_free(sem); return (AE_BAD_PARAMETER); } #endif *out_handle = (acpi_handle) sem; return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_delete_semaphore * * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore * * RETURN: Status * * DESCRIPTION: Delete an OS semaphore * *****************************************************************************/ acpi_status acpi_os_delete_semaphore(acpi_handle handle) { sem_t *sem = (sem_t *) handle; if (!sem) { return (AE_BAD_PARAMETER); } if (sem_destroy(sem) == -1) { return (AE_BAD_PARAMETER); } return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_wait_semaphore * * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore * units - How many units to wait for * msec_timeout - How long to wait (milliseconds) * * RETURN: Status * * DESCRIPTION: Wait for units * *****************************************************************************/ acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 msec_timeout) { acpi_status status = AE_OK; sem_t *sem = (sem_t *) handle; #ifndef ACPI_USE_ALTERNATE_TIMEOUT struct timespec time; int ret_val; #endif if (!sem) { return (AE_BAD_PARAMETER); } switch (msec_timeout) { /* * No Wait: * -------- * A zero timeout value indicates that we shouldn't wait - just * acquire the semaphore if available otherwise return AE_TIME * (a.k.a. 'would block'). */ case 0: if (sem_trywait(sem) == -1) { status = (AE_TIME); } break; /* Wait Indefinitely */ case ACPI_WAIT_FOREVER: if (sem_wait(sem)) { status = (AE_TIME); } break; /* Wait with msec_timeout */ default: #ifdef ACPI_USE_ALTERNATE_TIMEOUT /* * Alternate timeout mechanism for environments where * sem_timedwait is not available or does not work properly. */ while (msec_timeout) { if (sem_trywait(sem) == 0) { /* Got the semaphore */ return (AE_OK); } if (msec_timeout >= 10) { msec_timeout -= 10; usleep(10 * ACPI_USEC_PER_MSEC); /* ten milliseconds */ } else { msec_timeout--; usleep(ACPI_USEC_PER_MSEC); /* one millisecond */ } } status = (AE_TIME); #else /* * The interface to sem_timedwait is an absolute time, so we need to * get the current time, then add in the millisecond Timeout value. */ if (clock_gettime(CLOCK_REALTIME, &time) == -1) { perror("clock_gettime"); return (AE_TIME); } time.tv_sec += (msec_timeout / ACPI_MSEC_PER_SEC); time.tv_nsec += ((msec_timeout % ACPI_MSEC_PER_SEC) * ACPI_NSEC_PER_MSEC); /* Handle nanosecond overflow (field must be less than one second) */ if (time.tv_nsec >= ACPI_NSEC_PER_SEC) { time.tv_sec += (time.tv_nsec / ACPI_NSEC_PER_SEC); time.tv_nsec = (time.tv_nsec % ACPI_NSEC_PER_SEC); } while (((ret_val = sem_timedwait(sem, &time)) == -1) && (errno == EINTR)) { continue; } if (ret_val != 0) { if (errno != ETIMEDOUT) { perror("sem_timedwait"); } status = (AE_TIME); } #endif break; } return (status); } /****************************************************************************** * * FUNCTION: acpi_os_signal_semaphore * * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore * units - Number of units to send * * RETURN: Status * * DESCRIPTION: Send units * *****************************************************************************/ acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units) { sem_t *sem = (sem_t *) handle; if (!sem) { return (AE_BAD_PARAMETER); } if (sem_post(sem) == -1) { return (AE_LIMIT); } return (AE_OK); } #endif /* ACPI_SINGLE_THREADED */ /****************************************************************************** * * FUNCTION: Spinlock interfaces * * DESCRIPTION: Map these interfaces to semaphore interfaces * *****************************************************************************/ acpi_status acpi_os_create_lock(acpi_spinlock * out_handle) { return (acpi_os_create_semaphore(1, 1, out_handle)); } void acpi_os_delete_lock(acpi_spinlock handle) { acpi_os_delete_semaphore(handle); } acpi_cpu_flags acpi_os_acquire_lock(acpi_handle handle) { acpi_os_wait_semaphore(handle, 1, 0xFFFF); return (0); } void acpi_os_release_lock(acpi_spinlock handle, acpi_cpu_flags flags) { acpi_os_signal_semaphore(handle, 1); } /****************************************************************************** * * FUNCTION: acpi_os_install_interrupt_handler * * PARAMETERS: interrupt_number - Level handler should respond to. * isr - Address of the ACPI interrupt handler * except_ptr - Where status is returned * * RETURN: Handle to the newly installed handler. * * DESCRIPTION: Install an interrupt handler. Used to install the ACPI * OS-independent handler. * *****************************************************************************/ u32 acpi_os_install_interrupt_handler(u32 interrupt_number, acpi_osd_handler service_routine, void *context) { return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_remove_interrupt_handler * * PARAMETERS: handle - Returned when handler was installed * * RETURN: Status * * DESCRIPTION: Uninstalls an interrupt handler. * *****************************************************************************/ acpi_status acpi_os_remove_interrupt_handler(u32 interrupt_number, acpi_osd_handler service_routine) { return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_stall * * PARAMETERS: microseconds - Time to sleep * * RETURN: Blocks until sleep is completed. * * DESCRIPTION: Sleep at microsecond granularity * *****************************************************************************/ void acpi_os_stall(u32 microseconds) { if (microseconds) { usleep(microseconds); } } /****************************************************************************** * * FUNCTION: acpi_os_sleep * * PARAMETERS: milliseconds - Time to sleep * * RETURN: Blocks until sleep is completed. * * DESCRIPTION: Sleep at millisecond granularity * *****************************************************************************/ void acpi_os_sleep(u64 milliseconds) { /* Sleep for whole seconds */ sleep(milliseconds / ACPI_MSEC_PER_SEC); /* * Sleep for remaining microseconds. * Arg to usleep() is in usecs and must be less than 1,000,000 (1 second). */ usleep((milliseconds % ACPI_MSEC_PER_SEC) * ACPI_USEC_PER_MSEC); } /****************************************************************************** * * FUNCTION: acpi_os_get_timer * * PARAMETERS: None * * RETURN: Current time in 100 nanosecond units * * DESCRIPTION: Get the current system time * *****************************************************************************/ u64 acpi_os_get_timer(void) { struct timeval time; /* This timer has sufficient resolution for user-space application code */ gettimeofday(&time, NULL); /* (Seconds * 10^7 = 100ns(10^-7)) + (Microseconds(10^-6) * 10^1 = 100ns) */ return (((u64)time.tv_sec * ACPI_100NSEC_PER_SEC) + ((u64)time.tv_usec * ACPI_100NSEC_PER_USEC)); } /****************************************************************************** * * FUNCTION: acpi_os_read_pci_configuration * * PARAMETERS: pci_id - Seg/Bus/Dev * pci_register - Device Register * value - Buffer where value is placed * width - Number of bits * * RETURN: Status * * DESCRIPTION: Read data from PCI configuration space * *****************************************************************************/ acpi_status acpi_os_read_pci_configuration(struct acpi_pci_id *pci_id, u32 pci_register, u64 *value, u32 width) { *value = 0; return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_write_pci_configuration * * PARAMETERS: pci_id - Seg/Bus/Dev * pci_register - Device Register * value - Value to be written * width - Number of bits * * RETURN: Status. * * DESCRIPTION: Write data to PCI configuration space * *****************************************************************************/ acpi_status acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 pci_register, u64 value, u32 width) { return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_read_port * * PARAMETERS: address - Address of I/O port/register to read * value - Where value is placed * width - Number of bits * * RETURN: Value read from port * * DESCRIPTION: Read data from an I/O port or register * *****************************************************************************/ acpi_status acpi_os_read_port(acpi_io_address address, u32 *value, u32 width) { switch (width) { case 8: *value = 0xFF; break; case 16: *value = 0xFFFF; break; case 32: *value = 0xFFFFFFFF; break; default: return (AE_BAD_PARAMETER); } return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_write_port * * PARAMETERS: address - Address of I/O port/register to write * value - Value to write * width - Number of bits * * RETURN: None * * DESCRIPTION: Write data to an I/O port or register * *****************************************************************************/ acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width) { return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_read_memory * * PARAMETERS: address - Physical Memory Address to read * value - Where value is placed * width - Number of bits (8,16,32, or 64) * * RETURN: Value read from physical memory address. Always returned * as a 64-bit integer, regardless of the read width. * * DESCRIPTION: Read data from a physical memory address * *****************************************************************************/ acpi_status acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width) { switch (width) { case 8: case 16: case 32: case 64: *value = 0; break; default: return (AE_BAD_PARAMETER); } return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_write_memory * * PARAMETERS: address - Physical Memory Address to write * value - Value to write * width - Number of bits (8,16,32, or 64) * * RETURN: None * * DESCRIPTION: Write data to a physical memory address * *****************************************************************************/ acpi_status acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width) { return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_os_readable * * PARAMETERS: pointer - Area to be verified * length - Size of area * * RETURN: TRUE if readable for entire length * * DESCRIPTION: Verify that a pointer is valid for reading * *****************************************************************************/ u8 acpi_os_readable(void *pointer, acpi_size length) { return (TRUE); } /****************************************************************************** * * FUNCTION: acpi_os_writable * * PARAMETERS: pointer - Area to be verified * length - Size of area * * RETURN: TRUE if writable for entire length * * DESCRIPTION: Verify that a pointer is valid for writing * *****************************************************************************/ u8 acpi_os_writable(void *pointer, acpi_size length) { return (TRUE); } /****************************************************************************** * * FUNCTION: acpi_os_signal * * PARAMETERS: function - ACPI A signal function code * info - Pointer to function-dependent structure * * RETURN: Status * * DESCRIPTION: Miscellaneous functions. Example implementation only. * *****************************************************************************/ acpi_status acpi_os_signal(u32 function, void *info) { switch (function) { case ACPI_SIGNAL_FATAL: break; case ACPI_SIGNAL_BREAKPOINT: break; default: break; } return (AE_OK); } /* Optional multi-thread support */ #ifndef ACPI_SINGLE_THREADED /****************************************************************************** * * FUNCTION: acpi_os_get_thread_id * * PARAMETERS: None * * RETURN: Id of the running thread * * DESCRIPTION: Get the ID of the current (running) thread * *****************************************************************************/ acpi_thread_id acpi_os_get_thread_id(void) { pthread_t thread; thread = pthread_self(); return (ACPI_CAST_PTHREAD_T(thread)); } /****************************************************************************** * * FUNCTION: acpi_os_execute * * PARAMETERS: type - Type of execution * function - Address of the function to execute * context - Passed as a parameter to the function * * RETURN: Status. * * DESCRIPTION: Execute a new thread * *****************************************************************************/ acpi_status acpi_os_execute(acpi_execute_type type, acpi_osd_exec_callback function, void *context) { pthread_t thread; int ret; ret = pthread_create(&thread, NULL, (PTHREAD_CALLBACK) function, context); if (ret) { acpi_os_printf("Create thread failed"); } return (0); } #else /* ACPI_SINGLE_THREADED */ acpi_thread_id acpi_os_get_thread_id(void) { return (1); } acpi_status acpi_os_execute(acpi_execute_type type, acpi_osd_exec_callback function, void *context) { function(context); return (AE_OK); } #endif /* ACPI_SINGLE_THREADED */ /****************************************************************************** * * FUNCTION: acpi_os_wait_events_complete * * PARAMETERS: None * * RETURN: None * * DESCRIPTION: Wait for all asynchronous events to complete. This * implementation does nothing. * *****************************************************************************/ void acpi_os_wait_events_complete(void) { return; }