/* * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver * * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel * * Current driver maintained by Ben Dooks and Simtec Electronics * Copyright (C) 2008 Simtec Electronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "s3cmci.h" #define DRIVER_NAME "s3c-mci" #define S3C2410_SDICON (0x00) #define S3C2410_SDIPRE (0x04) #define S3C2410_SDICMDARG (0x08) #define S3C2410_SDICMDCON (0x0C) #define S3C2410_SDICMDSTAT (0x10) #define S3C2410_SDIRSP0 (0x14) #define S3C2410_SDIRSP1 (0x18) #define S3C2410_SDIRSP2 (0x1C) #define S3C2410_SDIRSP3 (0x20) #define S3C2410_SDITIMER (0x24) #define S3C2410_SDIBSIZE (0x28) #define S3C2410_SDIDCON (0x2C) #define S3C2410_SDIDCNT (0x30) #define S3C2410_SDIDSTA (0x34) #define S3C2410_SDIFSTA (0x38) #define S3C2410_SDIDATA (0x3C) #define S3C2410_SDIIMSK (0x40) #define S3C2440_SDIDATA (0x40) #define S3C2440_SDIIMSK (0x3C) #define S3C2440_SDICON_SDRESET (1 << 8) #define S3C2410_SDICON_SDIOIRQ (1 << 3) #define S3C2410_SDICON_FIFORESET (1 << 1) #define S3C2410_SDICON_CLOCKTYPE (1 << 0) #define S3C2410_SDICMDCON_LONGRSP (1 << 10) #define S3C2410_SDICMDCON_WAITRSP (1 << 9) #define S3C2410_SDICMDCON_CMDSTART (1 << 8) #define S3C2410_SDICMDCON_SENDERHOST (1 << 6) #define S3C2410_SDICMDCON_INDEX (0x3f) #define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12) #define S3C2410_SDICMDSTAT_CMDSENT (1 << 11) #define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10) #define S3C2410_SDICMDSTAT_RSPFIN (1 << 9) #define S3C2440_SDIDCON_DS_WORD (2 << 22) #define S3C2410_SDIDCON_TXAFTERRESP (1 << 20) #define S3C2410_SDIDCON_RXAFTERCMD (1 << 19) #define S3C2410_SDIDCON_BLOCKMODE (1 << 17) #define S3C2410_SDIDCON_WIDEBUS (1 << 16) #define S3C2410_SDIDCON_DMAEN (1 << 15) #define S3C2410_SDIDCON_STOP (1 << 14) #define S3C2440_SDIDCON_DATSTART (1 << 14) #define S3C2410_SDIDCON_XFER_RXSTART (2 << 12) #define S3C2410_SDIDCON_XFER_TXSTART (3 << 12) #define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) #define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9) #define S3C2410_SDIDSTA_FIFOFAIL (1 << 8) #define S3C2410_SDIDSTA_CRCFAIL (1 << 7) #define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6) #define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5) #define S3C2410_SDIDSTA_XFERFINISH (1 << 4) #define S3C2410_SDIDSTA_TXDATAON (1 << 1) #define S3C2410_SDIDSTA_RXDATAON (1 << 0) #define S3C2440_SDIFSTA_FIFORESET (1 << 16) #define S3C2440_SDIFSTA_FIFOFAIL (3 << 14) #define S3C2410_SDIFSTA_TFDET (1 << 13) #define S3C2410_SDIFSTA_RFDET (1 << 12) #define S3C2410_SDIFSTA_COUNTMASK (0x7f) #define S3C2410_SDIIMSK_RESPONSECRC (1 << 17) #define S3C2410_SDIIMSK_CMDSENT (1 << 16) #define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15) #define S3C2410_SDIIMSK_RESPONSEND (1 << 14) #define S3C2410_SDIIMSK_SDIOIRQ (1 << 12) #define S3C2410_SDIIMSK_FIFOFAIL (1 << 11) #define S3C2410_SDIIMSK_CRCSTATUS (1 << 10) #define S3C2410_SDIIMSK_DATACRC (1 << 9) #define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8) #define S3C2410_SDIIMSK_DATAFINISH (1 << 7) #define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4) #define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2) #define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0) enum dbg_channels { dbg_err = (1 << 0), dbg_debug = (1 << 1), dbg_info = (1 << 2), dbg_irq = (1 << 3), dbg_sg = (1 << 4), dbg_dma = (1 << 5), dbg_pio = (1 << 6), dbg_fail = (1 << 7), dbg_conf = (1 << 8), }; static const int dbgmap_err = dbg_fail; static const int dbgmap_info = dbg_info | dbg_conf; static const int dbgmap_debug = dbg_err | dbg_debug; #define dbg(host, channels, args...) \ do { \ if (dbgmap_err & channels) \ dev_err(&host->pdev->dev, args); \ else if (dbgmap_info & channels) \ dev_info(&host->pdev->dev, args); \ else if (dbgmap_debug & channels) \ dev_dbg(&host->pdev->dev, args); \ } while (0) static void finalize_request(struct s3cmci_host *host); static void s3cmci_send_request(struct mmc_host *mmc); static void s3cmci_reset(struct s3cmci_host *host); #ifdef CONFIG_MMC_DEBUG static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; u32 datcon, datcnt, datsta, fsta, imask; con = readl(host->base + S3C2410_SDICON); pre = readl(host->base + S3C2410_SDIPRE); cmdarg = readl(host->base + S3C2410_SDICMDARG); cmdcon = readl(host->base + S3C2410_SDICMDCON); cmdsta = readl(host->base + S3C2410_SDICMDSTAT); r0 = readl(host->base + S3C2410_SDIRSP0); r1 = readl(host->base + S3C2410_SDIRSP1); r2 = readl(host->base + S3C2410_SDIRSP2); r3 = readl(host->base + S3C2410_SDIRSP3); timer = readl(host->base + S3C2410_SDITIMER); bsize = readl(host->base + S3C2410_SDIBSIZE); datcon = readl(host->base + S3C2410_SDIDCON); datcnt = readl(host->base + S3C2410_SDIDCNT); datsta = readl(host->base + S3C2410_SDIDSTA); fsta = readl(host->base + S3C2410_SDIFSTA); imask = readl(host->base + host->sdiimsk); dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", prefix, con, pre, timer); dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", prefix, cmdcon, cmdarg, cmdsta); dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" " DSTA:[%08x] DCNT:[%08x]\n", prefix, datcon, fsta, datsta, datcnt); dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" " R2:[%08x] R3:[%08x]\n", prefix, r0, r1, r2, r3); } static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, int stop) { snprintf(host->dbgmsg_cmd, 300, "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", host->ccnt, (stop ? " (STOP)" : ""), cmd->opcode, cmd->arg, cmd->flags, cmd->retries); if (cmd->data) { snprintf(host->dbgmsg_dat, 300, "#%u bsize:%u blocks:%u bytes:%u", host->dcnt, cmd->data->blksz, cmd->data->blocks, cmd->data->blocks * cmd->data->blksz); } else { host->dbgmsg_dat[0] = '\0'; } } static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, int fail) { unsigned int dbglvl = fail ? dbg_fail : dbg_debug; if (!cmd) return; if (cmd->error == 0) { dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", host->dbgmsg_cmd, cmd->resp[0]); } else { dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", cmd->error, host->dbgmsg_cmd, host->status); } if (!cmd->data) return; if (cmd->data->error == 0) { dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); } else { dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", cmd->data->error, host->dbgmsg_dat, readl(host->base + S3C2410_SDIDCNT)); } } #else static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, int fail) { } static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, int stop) { } static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } #endif /* CONFIG_MMC_DEBUG */ /** * s3cmci_host_usedma - return whether the host is using dma or pio * @host: The host state * * Return true if the host is using DMA to transfer data, else false * to use PIO mode. Will return static data depending on the driver * configuration. */ static inline bool s3cmci_host_usedma(struct s3cmci_host *host) { #ifdef CONFIG_MMC_S3C_PIO return false; #else /* CONFIG_MMC_S3C_DMA */ return true; #endif } static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) { u32 newmask; newmask = readl(host->base + host->sdiimsk); newmask |= imask; writel(newmask, host->base + host->sdiimsk); return newmask; } static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) { u32 newmask; newmask = readl(host->base + host->sdiimsk); newmask &= ~imask; writel(newmask, host->base + host->sdiimsk); return newmask; } static inline void clear_imask(struct s3cmci_host *host) { u32 mask = readl(host->base + host->sdiimsk); /* preserve the SDIO IRQ mask state */ mask &= S3C2410_SDIIMSK_SDIOIRQ; writel(mask, host->base + host->sdiimsk); } /** * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled * @host: The host to check. * * Test to see if the SDIO interrupt is being signalled in case the * controller has failed to re-detect a card interrupt. Read GPE8 and * see if it is low and if so, signal a SDIO interrupt. * * This is currently called if a request is finished (we assume that the * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is * already being indicated. */ static void s3cmci_check_sdio_irq(struct s3cmci_host *host) { if (host->sdio_irqen) { if (gpio_get_value(S3C2410_GPE(8)) == 0) { pr_debug("%s: signalling irq\n", __func__); mmc_signal_sdio_irq(host->mmc); } } } static inline int get_data_buffer(struct s3cmci_host *host, u32 *bytes, u32 **pointer) { struct scatterlist *sg; if (host->pio_active == XFER_NONE) return -EINVAL; if ((!host->mrq) || (!host->mrq->data)) return -EINVAL; if (host->pio_sgptr >= host->mrq->data->sg_len) { dbg(host, dbg_debug, "no more buffers (%i/%i)\n", host->pio_sgptr, host->mrq->data->sg_len); return -EBUSY; } sg = &host->mrq->data->sg[host->pio_sgptr]; *bytes = sg->length; *pointer = sg_virt(sg); host->pio_sgptr++; dbg(host, dbg_sg, "new buffer (%i/%i)\n", host->pio_sgptr, host->mrq->data->sg_len); return 0; } static inline u32 fifo_count(struct s3cmci_host *host) { u32 fifostat = readl(host->base + S3C2410_SDIFSTA); fifostat &= S3C2410_SDIFSTA_COUNTMASK; return fifostat; } static inline u32 fifo_free(struct s3cmci_host *host) { u32 fifostat = readl(host->base + S3C2410_SDIFSTA); fifostat &= S3C2410_SDIFSTA_COUNTMASK; return 63 - fifostat; } /** * s3cmci_enable_irq - enable IRQ, after having disabled it. * @host: The device state. * @more: True if more IRQs are expected from transfer. * * Enable the main IRQ if needed after it has been disabled. * * The IRQ can be one of the following states: * - disabled during IDLE * - disabled whilst processing data * - enabled during transfer * - enabled whilst awaiting SDIO interrupt detection */ static void s3cmci_enable_irq(struct s3cmci_host *host, bool more) { unsigned long flags; bool enable = false; local_irq_save(flags); host->irq_enabled = more; host->irq_disabled = false; enable = more | host->sdio_irqen; if (host->irq_state != enable) { host->irq_state = enable; if (enable) enable_irq(host->irq); else disable_irq(host->irq); } local_irq_restore(flags); } /** * */ static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer) { unsigned long flags; local_irq_save(flags); /* pr_debug("%s: transfer %d\n", __func__, transfer); */ host->irq_disabled = transfer; if (transfer && host->irq_state) { host->irq_state = false; disable_irq(host->irq); } local_irq_restore(flags); } static void do_pio_read(struct s3cmci_host *host) { int res; u32 fifo; u32 *ptr; u32 fifo_words; void __iomem *from_ptr; /* write real prescaler to host, it might be set slow to fix */ writel(host->prescaler, host->base + S3C2410_SDIPRE); from_ptr = host->base + host->sdidata; while ((fifo = fifo_count(host))) { if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); if (res) { host->pio_active = XFER_NONE; host->complete_what = COMPLETION_FINALIZE; dbg(host, dbg_pio, "pio_read(): " "complete (no more data).\n"); return; } dbg(host, dbg_pio, "pio_read(): new target: [%i]@[%p]\n", host->pio_bytes, host->pio_ptr); } dbg(host, dbg_pio, "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", fifo, host->pio_bytes, readl(host->base + S3C2410_SDIDCNT)); /* If we have reached the end of the block, we can * read a word and get 1 to 3 bytes. If we in the * middle of the block, we have to read full words, * otherwise we will write garbage, so round down to * an even multiple of 4. */ if (fifo >= host->pio_bytes) fifo = host->pio_bytes; else fifo -= fifo & 3; host->pio_bytes -= fifo; host->pio_count += fifo; fifo_words = fifo >> 2; ptr = host->pio_ptr; while (fifo_words--) *ptr++ = readl(from_ptr); host->pio_ptr = ptr; if (fifo & 3) { u32 n = fifo & 3; u32 data = readl(from_ptr); u8 *p = (u8 *)host->pio_ptr; while (n--) { *p++ = data; data >>= 8; } } } if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); if (res) { dbg(host, dbg_pio, "pio_read(): complete (no more buffers).\n"); host->pio_active = XFER_NONE; host->complete_what = COMPLETION_FINALIZE; return; } } enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); } static void do_pio_write(struct s3cmci_host *host) { void __iomem *to_ptr; int res; u32 fifo; u32 *ptr; to_ptr = host->base + host->sdidata; while ((fifo = fifo_free(host)) > 3) { if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); if (res) { dbg(host, dbg_pio, "pio_write(): complete (no more data).\n"); host->pio_active = XFER_NONE; return; } dbg(host, dbg_pio, "pio_write(): new source: [%i]@[%p]\n", host->pio_bytes, host->pio_ptr); } /* If we have reached the end of the block, we have to * write exactly the remaining number of bytes. If we * in the middle of the block, we have to write full * words, so round down to an even multiple of 4. */ if (fifo >= host->pio_bytes) fifo = host->pio_bytes; else fifo -= fifo & 3; host->pio_bytes -= fifo; host->pio_count += fifo; fifo = (fifo + 3) >> 2; ptr = host->pio_ptr; while (fifo--) writel(*ptr++, to_ptr); host->pio_ptr = ptr; } enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); } static void pio_tasklet(unsigned long data) { struct s3cmci_host *host = (struct s3cmci_host *) data; s3cmci_disable_irq(host, true); if (host->pio_active == XFER_WRITE) do_pio_write(host); if (host->pio_active == XFER_READ) do_pio_read(host); if (host->complete_what == COMPLETION_FINALIZE) { clear_imask(host); if (host->pio_active != XFER_NONE) { dbg(host, dbg_err, "unfinished %s " "- pio_count:[%u] pio_bytes:[%u]\n", (host->pio_active == XFER_READ) ? "read" : "write", host->pio_count, host->pio_bytes); if (host->mrq->data) host->mrq->data->error = -EINVAL; } s3cmci_enable_irq(host, false); finalize_request(host); } else s3cmci_enable_irq(host, true); } /* * ISR for SDI Interface IRQ * Communication between driver and ISR works as follows: * host->mrq points to current request * host->complete_what Indicates when the request is considered done * COMPLETION_CMDSENT when the command was sent * COMPLETION_RSPFIN when a response was received * COMPLETION_XFERFINISH when the data transfer is finished * COMPLETION_XFERFINISH_RSPFIN both of the above. * host->complete_request is the completion-object the driver waits for * * 1) Driver sets up host->mrq and host->complete_what * 2) Driver prepares the transfer * 3) Driver enables interrupts * 4) Driver starts transfer * 5) Driver waits for host->complete_rquest * 6) ISR checks for request status (errors and success) * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error * 7) ISR completes host->complete_request * 8) ISR disables interrupts * 9) Driver wakes up and takes care of the request * * Note: "->error"-fields are expected to be set to 0 before the request * was issued by mmc.c - therefore they are only set, when an error * contition comes up */ static irqreturn_t s3cmci_irq(int irq, void *dev_id) { struct s3cmci_host *host = dev_id; struct mmc_command *cmd; u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; u32 mci_cclear = 0, mci_dclear; unsigned long iflags; mci_dsta = readl(host->base + S3C2410_SDIDSTA); mci_imsk = readl(host->base + host->sdiimsk); if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) { if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) { mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT; writel(mci_dclear, host->base + S3C2410_SDIDSTA); mmc_signal_sdio_irq(host->mmc); return IRQ_HANDLED; } } spin_lock_irqsave(&host->complete_lock, iflags); mci_csta = readl(host->base + S3C2410_SDICMDSTAT); mci_dcnt = readl(host->base + S3C2410_SDIDCNT); mci_fsta = readl(host->base + S3C2410_SDIFSTA); mci_dclear = 0; if ((host->complete_what == COMPLETION_NONE) || (host->complete_what == COMPLETION_FINALIZE)) { host->status = "nothing to complete"; clear_imask(host); goto irq_out; } if (!host->mrq) { host->status = "no active mrq"; clear_imask(host); goto irq_out; } cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd; if (!cmd) { host->status = "no active cmd"; clear_imask(host); goto irq_out; } if (!s3cmci_host_usedma(host)) { if ((host->pio_active == XFER_WRITE) && (mci_fsta & S3C2410_SDIFSTA_TFDET)) { disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); tasklet_schedule(&host->pio_tasklet); host->status = "pio tx"; } if ((host->pio_active == XFER_READ) && (mci_fsta & S3C2410_SDIFSTA_RFDET)) { disable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); tasklet_schedule(&host->pio_tasklet); host->status = "pio rx"; } } if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n"); cmd->error = -ETIMEDOUT; host->status = "error: command timeout"; goto fail_transfer; } if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { if (host->complete_what == COMPLETION_CMDSENT) { host->status = "ok: command sent"; goto close_transfer; } mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; } if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { if (cmd->flags & MMC_RSP_CRC) { if (host->mrq->cmd->flags & MMC_RSP_136) { dbg(host, dbg_irq, "fixup: ignore CRC fail with long rsp\n"); } else { /* note, we used to fail the transfer * here, but it seems that this is just * the hardware getting it wrong. * * cmd->error = -EILSEQ; * host->status = "error: bad command crc"; * goto fail_transfer; */ } } mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; } if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { if (host->complete_what == COMPLETION_RSPFIN) { host->status = "ok: command response received"; goto close_transfer; } if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) host->complete_what = COMPLETION_XFERFINISH; mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; } /* errors handled after this point are only relevant when a data transfer is in progress */ if (!cmd->data) goto clear_status_bits; /* Check for FIFO failure */ if (host->is2440) { if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { dbg(host, dbg_err, "FIFO failure\n"); host->mrq->data->error = -EILSEQ; host->status = "error: 2440 fifo failure"; goto fail_transfer; } } else { if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { dbg(host, dbg_err, "FIFO failure\n"); cmd->data->error = -EILSEQ; host->status = "error: fifo failure"; goto fail_transfer; } } if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { dbg(host, dbg_err, "bad data crc (outgoing)\n"); cmd->data->error = -EILSEQ; host->status = "error: bad data crc (outgoing)"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { dbg(host, dbg_err, "bad data crc (incoming)\n"); cmd->data->error = -EILSEQ; host->status = "error: bad data crc (incoming)"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { dbg(host, dbg_err, "data timeout\n"); cmd->data->error = -ETIMEDOUT; host->status = "error: data timeout"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { if (host->complete_what == COMPLETION_XFERFINISH) { host->status = "ok: data transfer completed"; goto close_transfer; } if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) host->complete_what = COMPLETION_RSPFIN; mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; } clear_status_bits: writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); writel(mci_dclear, host->base + S3C2410_SDIDSTA); goto irq_out; fail_transfer: host->pio_active = XFER_NONE; close_transfer: host->complete_what = COMPLETION_FINALIZE; clear_imask(host); tasklet_schedule(&host->pio_tasklet); goto irq_out; irq_out: dbg(host, dbg_irq, "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n", mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status); spin_unlock_irqrestore(&host->complete_lock, iflags); return IRQ_HANDLED; } static void s3cmci_dma_done_callback(void *arg) { struct s3cmci_host *host = arg; unsigned long iflags; BUG_ON(!host->mrq); BUG_ON(!host->mrq->data); spin_lock_irqsave(&host->complete_lock, iflags); dbg(host, dbg_dma, "DMA FINISHED\n"); host->dma_complete = 1; host->complete_what = COMPLETION_FINALIZE; tasklet_schedule(&host->pio_tasklet); spin_unlock_irqrestore(&host->complete_lock, iflags); } static void finalize_request(struct s3cmci_host *host) { struct mmc_request *mrq = host->mrq; struct mmc_command *cmd; int debug_as_failure = 0; if (host->complete_what != COMPLETION_FINALIZE) return; if (!mrq) return; cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; if (cmd->data && (cmd->error == 0) && (cmd->data->error == 0)) { if (s3cmci_host_usedma(host) && (!host->dma_complete)) { dbg(host, dbg_dma, "DMA Missing (%d)!\n", host->dma_complete); return; } } /* Read response from controller. */ cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); writel(host->prescaler, host->base + S3C2410_SDIPRE); if (cmd->error) debug_as_failure = 1; if (cmd->data && cmd->data->error) debug_as_failure = 1; dbg_dumpcmd(host, cmd, debug_as_failure); /* Cleanup controller */ writel(0, host->base + S3C2410_SDICMDARG); writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); writel(0, host->base + S3C2410_SDICMDCON); clear_imask(host); if (cmd->data && cmd->error) cmd->data->error = cmd->error; if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { host->cmd_is_stop = 1; s3cmci_send_request(host->mmc); return; } /* If we have no data transfer we are finished here */ if (!mrq->data) goto request_done; /* Calculate the amout of bytes transfer if there was no error */ if (mrq->data->error == 0) { mrq->data->bytes_xfered = (mrq->data->blocks * mrq->data->blksz); } else { mrq->data->bytes_xfered = 0; } /* If we had an error while transferring data we flush the * DMA channel and the fifo to clear out any garbage. */ if (mrq->data->error != 0) { if (s3cmci_host_usedma(host)) dmaengine_terminate_all(host->dma); if (host->is2440) { /* Clear failure register and reset fifo. */ writel(S3C2440_SDIFSTA_FIFORESET | S3C2440_SDIFSTA_FIFOFAIL, host->base + S3C2410_SDIFSTA); } else { u32 mci_con; /* reset fifo */ mci_con = readl(host->base + S3C2410_SDICON); mci_con |= S3C2410_SDICON_FIFORESET; writel(mci_con, host->base + S3C2410_SDICON); } } request_done: host->complete_what = COMPLETION_NONE; host->mrq = NULL; s3cmci_check_sdio_irq(host); mmc_request_done(host->mmc, mrq); } static void s3cmci_send_command(struct s3cmci_host *host, struct mmc_command *cmd) { u32 ccon, imsk; imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | S3C2410_SDIIMSK_RESPONSECRC; enable_imask(host, imsk); if (cmd->data) host->complete_what = COMPLETION_XFERFINISH_RSPFIN; else if (cmd->flags & MMC_RSP_PRESENT) host->complete_what = COMPLETION_RSPFIN; else host->complete_what = COMPLETION_CMDSENT; writel(cmd->arg, host->base + S3C2410_SDICMDARG); ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; if (cmd->flags & MMC_RSP_PRESENT) ccon |= S3C2410_SDICMDCON_WAITRSP; if (cmd->flags & MMC_RSP_136) ccon |= S3C2410_SDICMDCON_LONGRSP; writel(ccon, host->base + S3C2410_SDICMDCON); } static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) { u32 dcon, imsk, stoptries = 3; /* write DCON register */ if (!data) { writel(0, host->base + S3C2410_SDIDCON); return 0; } if ((data->blksz & 3) != 0) { /* We cannot deal with unaligned blocks with more than * one block being transferred. */ if (data->blocks > 1) { pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz); return -EINVAL; } } while (readl(host->base + S3C2410_SDIDSTA) & (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { dbg(host, dbg_err, "mci_setup_data() transfer stillin progress.\n"); writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); s3cmci_reset(host); if ((stoptries--) == 0) { dbg_dumpregs(host, "DRF"); return -EINVAL; } } dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; if (s3cmci_host_usedma(host)) dcon |= S3C2410_SDIDCON_DMAEN; if (host->bus_width == MMC_BUS_WIDTH_4) dcon |= S3C2410_SDIDCON_WIDEBUS; dcon |= S3C2410_SDIDCON_BLOCKMODE; if (data->flags & MMC_DATA_WRITE) { dcon |= S3C2410_SDIDCON_TXAFTERRESP; dcon |= S3C2410_SDIDCON_XFER_TXSTART; } if (data->flags & MMC_DATA_READ) { dcon |= S3C2410_SDIDCON_RXAFTERCMD; dcon |= S3C2410_SDIDCON_XFER_RXSTART; } if (host->is2440) { dcon |= S3C2440_SDIDCON_DS_WORD; dcon |= S3C2440_SDIDCON_DATSTART; } writel(dcon, host->base + S3C2410_SDIDCON); /* write BSIZE register */ writel(data->blksz, host->base + S3C2410_SDIBSIZE); /* add to IMASK register */ imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; enable_imask(host, imsk); /* write TIMER register */ if (host->is2440) { writel(0x007FFFFF, host->base + S3C2410_SDITIMER); } else { writel(0x0000FFFF, host->base + S3C2410_SDITIMER); /* FIX: set slow clock to prevent timeouts on read */ if (data->flags & MMC_DATA_READ) writel(0xFF, host->base + S3C2410_SDIPRE); } return 0; } #define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ) static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) { int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); host->pio_sgptr = 0; host->pio_bytes = 0; host->pio_count = 0; host->pio_active = rw ? XFER_WRITE : XFER_READ; if (rw) { do_pio_write(host); enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); } else { enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); } return 0; } static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) { int rw = data->flags & MMC_DATA_WRITE; struct dma_async_tx_descriptor *desc; struct dma_slave_config conf = { .src_addr = host->mem->start + host->sdidata, .dst_addr = host->mem->start + host->sdidata, .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, }; BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); /* Restore prescaler value */ writel(host->prescaler, host->base + S3C2410_SDIPRE); if (!rw) conf.direction = DMA_DEV_TO_MEM; else conf.direction = DMA_MEM_TO_DEV; dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, mmc_get_dma_dir(data)); dmaengine_slave_config(host->dma, &conf); desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len, conf.direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT); if (!desc) goto unmap_exit; desc->callback = s3cmci_dma_done_callback; desc->callback_param = host; dmaengine_submit(desc); dma_async_issue_pending(host->dma); return 0; unmap_exit: dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, mmc_get_dma_dir(data)); return -ENOMEM; } static void s3cmci_send_request(struct mmc_host *mmc) { struct s3cmci_host *host = mmc_priv(mmc); struct mmc_request *mrq = host->mrq; struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; host->ccnt++; prepare_dbgmsg(host, cmd, host->cmd_is_stop); /* Clear command, data and fifo status registers Fifo clear only necessary on 2440, but doesn't hurt on 2410 */ writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); if (cmd->data) { int res = s3cmci_setup_data(host, cmd->data); host->dcnt++; if (res) { dbg(host, dbg_err, "setup data error %d\n", res); cmd->error = res; cmd->data->error = res; mmc_request_done(mmc, mrq); return; } if (s3cmci_host_usedma(host)) res = s3cmci_prepare_dma(host, cmd->data); else res = s3cmci_prepare_pio(host, cmd->data); if (res) { dbg(host, dbg_err, "data prepare error %d\n", res); cmd->error = res; cmd->data->error = res; mmc_request_done(mmc, mrq); return; } } /* Send command */ s3cmci_send_command(host, cmd); /* Enable Interrupt */ s3cmci_enable_irq(host, true); } static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct s3cmci_host *host = mmc_priv(mmc); host->status = "mmc request"; host->cmd_is_stop = 0; host->mrq = mrq; if (mmc_gpio_get_cd(mmc) == 0) { dbg(host, dbg_err, "%s: no medium present\n", __func__); host->mrq->cmd->error = -ENOMEDIUM; mmc_request_done(mmc, mrq); } else s3cmci_send_request(mmc); } static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios) { u32 mci_psc; /* Set clock */ for (mci_psc = 0; mci_psc < 255; mci_psc++) { host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); if (host->real_rate <= ios->clock) break; } if (mci_psc > 255) mci_psc = 255; host->prescaler = mci_psc; writel(host->prescaler, host->base + S3C2410_SDIPRE); /* If requested clock is 0, real_rate will be 0, too */ if (ios->clock == 0) host->real_rate = 0; } static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct s3cmci_host *host = mmc_priv(mmc); u32 mci_con; /* Set the power state */ mci_con = readl(host->base + S3C2410_SDICON); switch (ios->power_mode) { case MMC_POWER_ON: case MMC_POWER_UP: /* Configure GPE5...GPE10 pins in SD mode */ if (!host->pdev->dev.of_node) s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); if (host->pdata->set_power) host->pdata->set_power(ios->power_mode, ios->vdd); if (!host->is2440) mci_con |= S3C2410_SDICON_FIFORESET; break; case MMC_POWER_OFF: default: if (!host->pdev->dev.of_node) gpio_direction_output(S3C2410_GPE(5), 0); if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; if (host->pdata->set_power) host->pdata->set_power(ios->power_mode, ios->vdd); break; } s3cmci_set_clk(host, ios); /* Set CLOCK_ENABLE */ if (ios->clock) mci_con |= S3C2410_SDICON_CLOCKTYPE; else mci_con &= ~S3C2410_SDICON_CLOCKTYPE; writel(mci_con, host->base + S3C2410_SDICON); if ((ios->power_mode == MMC_POWER_ON) || (ios->power_mode == MMC_POWER_UP)) { dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", host->real_rate/1000, ios->clock/1000); } else { dbg(host, dbg_conf, "powered down.\n"); } host->bus_width = ios->bus_width; } static void s3cmci_reset(struct s3cmci_host *host) { u32 con = readl(host->base + S3C2410_SDICON); con |= S3C2440_SDICON_SDRESET; writel(con, host->base + S3C2410_SDICON); } static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct s3cmci_host *host = mmc_priv(mmc); unsigned long flags; u32 con; local_irq_save(flags); con = readl(host->base + S3C2410_SDICON); host->sdio_irqen = enable; if (enable == host->sdio_irqen) goto same_state; if (enable) { con |= S3C2410_SDICON_SDIOIRQ; enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ); if (!host->irq_state && !host->irq_disabled) { host->irq_state = true; enable_irq(host->irq); } } else { disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ); con &= ~S3C2410_SDICON_SDIOIRQ; if (!host->irq_enabled && host->irq_state) { disable_irq_nosync(host->irq); host->irq_state = false; } } writel(con, host->base + S3C2410_SDICON); same_state: local_irq_restore(flags); s3cmci_check_sdio_irq(host); } static const struct mmc_host_ops s3cmci_ops = { .request = s3cmci_request, .set_ios = s3cmci_set_ios, .get_ro = mmc_gpio_get_ro, .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = s3cmci_enable_sdio_irq, }; static struct s3c24xx_mci_pdata s3cmci_def_pdata = { /* This is currently here to avoid a number of if (host->pdata) * checks. Any zero fields to ensure reasonable defaults are picked. */ .no_wprotect = 1, .no_detect = 1, }; #ifdef CONFIG_ARM_S3C24XX_CPUFREQ static int s3cmci_cpufreq_transition(struct notifier_block *nb, unsigned long val, void *data) { struct s3cmci_host *host; struct mmc_host *mmc; unsigned long newclk; unsigned long flags; host = container_of(nb, struct s3cmci_host, freq_transition); newclk = clk_get_rate(host->clk); mmc = host->mmc; if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) || (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) { spin_lock_irqsave(&mmc->lock, flags); host->clk_rate = newclk; if (mmc->ios.power_mode != MMC_POWER_OFF && mmc->ios.clock != 0) s3cmci_set_clk(host, &mmc->ios); spin_unlock_irqrestore(&mmc->lock, flags); } return 0; } static inline int s3cmci_cpufreq_register(struct s3cmci_host *host) { host->freq_transition.notifier_call = s3cmci_cpufreq_transition; return cpufreq_register_notifier(&host->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); } static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host) { cpufreq_unregister_notifier(&host->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); } #else static inline int s3cmci_cpufreq_register(struct s3cmci_host *host) { return 0; } static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host) { } #endif #ifdef CONFIG_DEBUG_FS static int s3cmci_state_show(struct seq_file *seq, void *v) { struct s3cmci_host *host = seq->private; seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base); seq_printf(seq, "Clock rate = %ld\n", host->clk_rate); seq_printf(seq, "Prescale = %d\n", host->prescaler); seq_printf(seq, "is2440 = %d\n", host->is2440); seq_printf(seq, "IRQ = %d\n", host->irq); seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled); seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled); seq_printf(seq, "IRQ state = %d\n", host->irq_state); seq_printf(seq, "CD IRQ = %d\n", host->irq_cd); seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host)); seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk); seq_printf(seq, "SDIDATA at %d\n", host->sdidata); return 0; } static int s3cmci_state_open(struct inode *inode, struct file *file) { return single_open(file, s3cmci_state_show, inode->i_private); } static const struct file_operations s3cmci_fops_state = { .owner = THIS_MODULE, .open = s3cmci_state_open, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; #define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r } struct s3cmci_reg { unsigned short addr; unsigned char *name; } debug_regs[] = { DBG_REG(CON), DBG_REG(PRE), DBG_REG(CMDARG), DBG_REG(CMDCON), DBG_REG(CMDSTAT), DBG_REG(RSP0), DBG_REG(RSP1), DBG_REG(RSP2), DBG_REG(RSP3), DBG_REG(TIMER), DBG_REG(BSIZE), DBG_REG(DCON), DBG_REG(DCNT), DBG_REG(DSTA), DBG_REG(FSTA), {} }; static int s3cmci_regs_show(struct seq_file *seq, void *v) { struct s3cmci_host *host = seq->private; struct s3cmci_reg *rptr = debug_regs; for (; rptr->name; rptr++) seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name, readl(host->base + rptr->addr)); seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk)); return 0; } static int s3cmci_regs_open(struct inode *inode, struct file *file) { return single_open(file, s3cmci_regs_show, inode->i_private); } static const struct file_operations s3cmci_fops_regs = { .owner = THIS_MODULE, .open = s3cmci_regs_open, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; static void s3cmci_debugfs_attach(struct s3cmci_host *host) { struct device *dev = &host->pdev->dev; host->debug_root = debugfs_create_dir(dev_name(dev), NULL); if (IS_ERR(host->debug_root)) { dev_err(dev, "failed to create debugfs root\n"); return; } host->debug_state = debugfs_create_file("state", 0444, host->debug_root, host, &s3cmci_fops_state); if (IS_ERR(host->debug_state)) dev_err(dev, "failed to create debug state file\n"); host->debug_regs = debugfs_create_file("regs", 0444, host->debug_root, host, &s3cmci_fops_regs); if (IS_ERR(host->debug_regs)) dev_err(dev, "failed to create debug regs file\n"); } static void s3cmci_debugfs_remove(struct s3cmci_host *host) { debugfs_remove(host->debug_regs); debugfs_remove(host->debug_state); debugfs_remove(host->debug_root); } #else static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { } static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } #endif /* CONFIG_DEBUG_FS */ static int s3cmci_probe_pdata(struct s3cmci_host *host) { struct platform_device *pdev = host->pdev; struct mmc_host *mmc = host->mmc; struct s3c24xx_mci_pdata *pdata; int i, ret; host->is2440 = platform_get_device_id(pdev)->driver_data; for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { ret = gpio_request(i, dev_name(&pdev->dev)); if (ret) { dev_err(&pdev->dev, "failed to get gpio %d\n", i); for (i--; i >= S3C2410_GPE(5); i--) gpio_free(i); return ret; } } if (!pdev->dev.platform_data) pdev->dev.platform_data = &s3cmci_def_pdata; pdata = pdev->dev.platform_data; if (pdata->no_wprotect) mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; if (pdata->no_detect) mmc->caps |= MMC_CAP_NEEDS_POLL; if (pdata->wprotect_invert) mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; if (pdata->detect_invert) mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; if (gpio_is_valid(pdata->gpio_detect)) { ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0); if (ret) { dev_err(&pdev->dev, "error requesting GPIO for CD %d\n", ret); return ret; } } if (gpio_is_valid(pdata->gpio_wprotect)) { ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect); if (ret) { dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", ret); return ret; } } return 0; } static int s3cmci_probe_dt(struct s3cmci_host *host) { struct platform_device *pdev = host->pdev; struct s3c24xx_mci_pdata *pdata; struct mmc_host *mmc = host->mmc; int ret; host->is2440 = (int) of_device_get_match_data(&pdev->dev); ret = mmc_of_parse(mmc); if (ret) return ret; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; pdev->dev.platform_data = pdata; return 0; } static int s3cmci_probe(struct platform_device *pdev) { struct s3cmci_host *host; struct mmc_host *mmc; int ret; int i; mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; goto probe_out; } host = mmc_priv(mmc); host->mmc = mmc; host->pdev = pdev; if (pdev->dev.of_node) ret = s3cmci_probe_dt(host); else ret = s3cmci_probe_pdata(host); if (ret) goto probe_free_host; host->pdata = pdev->dev.platform_data; spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); if (host->is2440) { host->sdiimsk = S3C2440_SDIIMSK; host->sdidata = S3C2440_SDIDATA; host->clk_div = 1; } else { host->sdiimsk = S3C2410_SDIIMSK; host->sdidata = S3C2410_SDIDATA; host->clk_div = 2; } host->complete_what = COMPLETION_NONE; host->pio_active = XFER_NONE; host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { dev_err(&pdev->dev, "failed to get io memory region resource.\n"); ret = -ENOENT; goto probe_free_gpio; } host->mem = request_mem_region(host->mem->start, resource_size(host->mem), pdev->name); if (!host->mem) { dev_err(&pdev->dev, "failed to request io memory region.\n"); ret = -ENOENT; goto probe_free_gpio; } host->base = ioremap(host->mem->start, resource_size(host->mem)); if (!host->base) { dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); ret = -EINVAL; goto probe_free_mem_region; } host->irq = platform_get_irq(pdev, 0); if (host->irq <= 0) { dev_err(&pdev->dev, "failed to get interrupt resource.\n"); ret = -EINVAL; goto probe_iounmap; } if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { dev_err(&pdev->dev, "failed to request mci interrupt.\n"); ret = -ENOENT; goto probe_iounmap; } /* We get spurious interrupts even when we have set the IMSK * register to ignore everything, so use disable_irq() to make * ensure we don't lock the system with un-serviceable requests. */ disable_irq(host->irq); host->irq_state = false; /* Depending on the dma state, get a DMA channel to use. */ if (s3cmci_host_usedma(host)) { host->dma = dma_request_chan(&pdev->dev, "rx-tx"); ret = PTR_ERR_OR_ZERO(host->dma); if (ret) { dev_err(&pdev->dev, "cannot get DMA channel.\n"); goto probe_free_irq; } } host->clk = clk_get(&pdev->dev, "sdi"); if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "failed to find clock source.\n"); ret = PTR_ERR(host->clk); host->clk = NULL; goto probe_free_dma; } ret = clk_prepare_enable(host->clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock source.\n"); goto clk_free; } host->clk_rate = clk_get_rate(host->clk); mmc->ops = &s3cmci_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; #ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; #else mmc->caps = MMC_CAP_4_BIT_DATA; #endif mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; if (host->pdata->ocr_avail) mmc->ocr_avail = host->pdata->ocr_avail; mmc->max_blk_count = 4095; mmc->max_blk_size = 4095; mmc->max_req_size = 4095 * 512; mmc->max_seg_size = mmc->max_req_size; mmc->max_segs = 128; dbg(host, dbg_debug, "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n", (host->is2440?"2440":""), host->base, host->irq, host->irq_cd, host->dma); ret = s3cmci_cpufreq_register(host); if (ret) { dev_err(&pdev->dev, "failed to register cpufreq\n"); goto free_dmabuf; } ret = mmc_add_host(mmc); if (ret) { dev_err(&pdev->dev, "failed to add mmc host.\n"); goto free_cpufreq; } s3cmci_debugfs_attach(host); platform_set_drvdata(pdev, mmc); dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc), s3cmci_host_usedma(host) ? "dma" : "pio", mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw"); return 0; free_cpufreq: s3cmci_cpufreq_deregister(host); free_dmabuf: clk_disable_unprepare(host->clk); clk_free: clk_put(host->clk); probe_free_dma: if (s3cmci_host_usedma(host)) dma_release_channel(host->dma); probe_free_irq: free_irq(host->irq, host); probe_iounmap: iounmap(host->base); probe_free_mem_region: release_mem_region(host->mem->start, resource_size(host->mem)); probe_free_gpio: if (!pdev->dev.of_node) for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) gpio_free(i); probe_free_host: mmc_free_host(mmc); probe_out: return ret; } static void s3cmci_shutdown(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct s3cmci_host *host = mmc_priv(mmc); if (host->irq_cd >= 0) free_irq(host->irq_cd, host); s3cmci_debugfs_remove(host); s3cmci_cpufreq_deregister(host); mmc_remove_host(mmc); clk_disable_unprepare(host->clk); } static int s3cmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct s3cmci_host *host = mmc_priv(mmc); int i; s3cmci_shutdown(pdev); clk_put(host->clk); tasklet_disable(&host->pio_tasklet); if (s3cmci_host_usedma(host)) dma_release_channel(host->dma); free_irq(host->irq, host); if (!pdev->dev.of_node) for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) gpio_free(i); iounmap(host->base); release_mem_region(host->mem->start, resource_size(host->mem)); mmc_free_host(mmc); return 0; } static const struct of_device_id s3cmci_dt_match[] = { { .compatible = "samsung,s3c2410-sdi", .data = (void *)0, }, { .compatible = "samsung,s3c2412-sdi", .data = (void *)1, }, { .compatible = "samsung,s3c2440-sdi", .data = (void *)1, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, s3cmci_dt_match); static const struct platform_device_id s3cmci_driver_ids[] = { { .name = "s3c2410-sdi", .driver_data = 0, }, { .name = "s3c2412-sdi", .driver_data = 1, }, { .name = "s3c2440-sdi", .driver_data = 1, }, { } }; MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids); static struct platform_driver s3cmci_driver = { .driver = { .name = "s3c-sdi", .of_match_table = s3cmci_dt_match, }, .id_table = s3cmci_driver_ids, .probe = s3cmci_probe, .remove = s3cmci_remove, .shutdown = s3cmci_shutdown, }; module_platform_driver(s3cmci_driver); MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Thomas Kleffel , Ben Dooks ");