/* * Core pinctrl/GPIO driver for Intel GPIO controllers * * Copyright (C) 2015, Intel Corporation * Authors: Mathias Nyman * Mika Westerberg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef PINCTRL_INTEL_H #define PINCTRL_INTEL_H struct pinctrl_pin_desc; struct platform_device; struct device; /** * struct intel_pingroup - Description about group of pins * @name: Name of the groups * @pins: All pins in this group * @npins: Number of pins in this groups * @mode: Native mode in which the group is muxed out @pins */ struct intel_pingroup { const char *name; const unsigned *pins; size_t npins; unsigned short mode; }; /** * struct intel_function - Description about a function * @name: Name of the function * @groups: An array of groups for this function * @ngroups: Number of groups in @groups */ struct intel_function { const char *name; const char * const *groups; size_t ngroups; }; /** * struct intel_padgroup - Hardware pad group information * @reg_num: GPI_IS register number * @base: Starting pin of this group * @size: Size of this group (maximum is 32). * @padown_num: PAD_OWN register number (assigned by the core driver) * * If pad groups of a community are not the same size, use this structure * to specify them. */ struct intel_padgroup { unsigned reg_num; unsigned base; unsigned size; unsigned padown_num; }; /** * struct intel_community - Intel pin community description * @barno: MMIO BAR number where registers for this community reside * @padown_offset: Register offset of PAD_OWN register from @regs. If %0 * then there is no support for owner. * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then * locking is not supported. * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it * is assumed that the host owns the pin (rather than * ACPI). * @ie_offset: Register offset of GPI_IE from @regs. * @pin_base: Starting pin of pins in this community * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, * HOSTSW_OWN, GPI_IS, GPI_IE, etc. Used when @gpps is %NULL. * @gpp_num_padown_regs: Number of pad registers each pad group consumes at * minimum. Use %0 if the number of registers can be * determined by the size of the group. * @npins: Number of pins in this community * @features: Additional features supported by the hardware * @gpps: Pad groups if the controller has variable size pad groups * @ngpps: Number of pad groups in this community * @regs: Community specific common registers (reserved for core driver) * @pad_regs: Community specific pad registers (reserved for core driver) * * Most Intel GPIO host controllers this driver supports each pad group is * of equal size (except the last one). In that case the driver can just * fill in @gpp_size field and let the core driver to handle the rest. If * the controller has pad groups of variable size the client driver can * pass custom @gpps and @ngpps instead. */ struct intel_community { unsigned barno; unsigned padown_offset; unsigned padcfglock_offset; unsigned hostown_offset; unsigned ie_offset; unsigned pin_base; unsigned gpp_size; unsigned gpp_num_padown_regs; size_t npins; unsigned features; const struct intel_padgroup *gpps; size_t ngpps; /* Reserved for the core driver */ void __iomem *regs; void __iomem *pad_regs; }; /* Additional features supported by the hardware */ #define PINCTRL_FEATURE_DEBOUNCE BIT(0) #define PINCTRL_FEATURE_1K_PD BIT(1) #define PIN_GROUP(n, p, m) \ { \ .name = (n), \ .pins = (p), \ .npins = ARRAY_SIZE((p)), \ .mode = (m), \ } #define FUNCTION(n, g) \ { \ .name = (n), \ .groups = (g), \ .ngroups = ARRAY_SIZE((g)), \ } /** * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration * @uid: ACPI _UID for the probe driver use if needed * @pins: Array if pins this pinctrl controls * @npins: Number of pins in the array * @groups: Array of pin groups * @ngroups: Number of groups in the array * @functions: Array of functions * @nfunctions: Number of functions in the array * @communities: Array of communities this pinctrl handles * @ncommunities: Number of communities in the array * * The @communities is used as a template by the core driver. It will make * copy of all communities and fill in rest of the information. */ struct intel_pinctrl_soc_data { const char *uid; const struct pinctrl_pin_desc *pins; size_t npins; const struct intel_pingroup *groups; size_t ngroups; const struct intel_function *functions; size_t nfunctions; const struct intel_community *communities; size_t ncommunities; }; int intel_pinctrl_probe(struct platform_device *pdev, const struct intel_pinctrl_soc_data *soc_data); #ifdef CONFIG_PM_SLEEP int intel_pinctrl_suspend(struct device *dev); int intel_pinctrl_resume(struct device *dev); #endif #endif /* PINCTRL_INTEL_H */