/* * linux/arch/arm/mach-omap2/board-3430sdp.c * * Copyright (C) 2007 Texas Instruments * * Modified from mach-omap2/board-generic.c * * Initial code: Syed Mohammed Khasim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "board-flash.h" #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "hsmmc.h" #include "pm.h" #include "control.h" #include "common-board-devices.h" #define CONFIG_DISABLE_HFCLK 1 #define SDP3430_TS_GPIO_IRQ_SDPV1 3 #define SDP3430_TS_GPIO_IRQ_SDPV2 2 #define ENABLE_VAUX3_DEDICATED 0x03 #define ENABLE_VAUX3_DEV_GRP 0x20 #define TWL4030_MSECURE_GPIO 22 /* FIXME: These values need to be updated based on more profiling on 3430sdp*/ static struct cpuidle_params omap3_cpuidle_params_table[] = { /* C1 */ {1, 2, 2, 5}, /* C2 */ {1, 10, 10, 30}, /* C3 */ {1, 50, 50, 300}, /* C4 */ {1, 1500, 1800, 4000}, /* C5 */ {1, 2500, 7500, 12000}, /* C6 */ {1, 3000, 8500, 15000}, /* C7 */ {1, 10000, 30000, 300000}, }; static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), KEY(0, 2, KEY_A), KEY(0, 3, KEY_B), KEY(0, 4, KEY_C), KEY(1, 0, KEY_DOWN), KEY(1, 1, KEY_UP), KEY(1, 2, KEY_E), KEY(1, 3, KEY_F), KEY(1, 4, KEY_G), KEY(2, 0, KEY_ENTER), KEY(2, 1, KEY_I), KEY(2, 2, KEY_J), KEY(2, 3, KEY_K), KEY(2, 4, KEY_3), KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 3, KEY_P), KEY(3, 4, KEY_Q), KEY(4, 0, KEY_R), KEY(4, 1, KEY_4), KEY(4, 2, KEY_T), KEY(4, 3, KEY_U), KEY(4, 4, KEY_D), KEY(5, 0, KEY_V), KEY(5, 1, KEY_W), KEY(5, 2, KEY_L), KEY(5, 3, KEY_S), KEY(5, 4, KEY_H), 0 }; static struct matrix_keymap_data board_map_data = { .keymap = board_keymap, .keymap_size = ARRAY_SIZE(board_keymap), }; static struct twl4030_keypad_data sdp3430_kp_data = { .keymap_data = &board_map_data, .rows = 5, .cols = 6, .rep = 1, }; #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 static unsigned backlight_gpio; static unsigned enable_gpio; static int lcd_enabled; static int dvi_enabled; static void __init sdp3430_display_init(void) { int r; enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; r = gpio_request(enable_gpio, "LCD reset"); if (r) { printk(KERN_ERR "failed to get LCD reset GPIO\n"); goto err0; } r = gpio_request(backlight_gpio, "LCD Backlight"); if (r) { printk(KERN_ERR "failed to get LCD backlight GPIO\n"); goto err1; } gpio_direction_output(enable_gpio, 0); gpio_direction_output(backlight_gpio, 0); return; err1: gpio_free(enable_gpio); err0: return; } static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) { if (dvi_enabled) { printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); return -EINVAL; } gpio_direction_output(enable_gpio, 1); gpio_direction_output(backlight_gpio, 1); lcd_enabled = 1; return 0; } static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; gpio_direction_output(enable_gpio, 0); gpio_direction_output(backlight_gpio, 0); } static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) { if (lcd_enabled) { printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); return -EINVAL; } dvi_enabled = 1; return 0; } static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) { dvi_enabled = 0; } static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; } static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) { } static struct omap_dss_device sdp3430_lcd_device = { .name = "lcd", .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 16, .platform_enable = sdp3430_panel_enable_lcd, .platform_disable = sdp3430_panel_disable_lcd, }; static struct panel_generic_dpi_data dvi_panel = { .name = "generic", .platform_enable = sdp3430_panel_enable_dvi, .platform_disable = sdp3430_panel_disable_dvi, }; static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, .driver_name = "generic_dpi_panel", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; static struct omap_dss_device sdp3430_tv_device = { .name = "tv", .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, .platform_enable = sdp3430_panel_enable_tv, .platform_disable = sdp3430_panel_disable_tv, }; static struct omap_dss_device *sdp3430_dss_devices[] = { &sdp3430_lcd_device, &sdp3430_dvi_device, &sdp3430_tv_device, }; static struct omap_dss_board_info sdp3430_dss_data = { .num_devices = ARRAY_SIZE(sdp3430_dss_devices), .devices = sdp3430_dss_devices, .default_device = &sdp3430_lcd_device, }; static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; static void __init omap_3430sdp_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); } static int sdp3430_batt_table[] = { /* 0 C*/ 30800, 29500, 28300, 27100, 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, 11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, 8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, 5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, 4040, 3910, 3790, 3670, 3550 }; static struct twl4030_bci_platform_data sdp3430_bci_data = { .battery_tmp_tbl = sdp3430_batt_table, .tblsize = ARRAY_SIZE(sdp3430_batt_table), }; static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, /* 8 bits (default) requires S6.3 == ON, * so the SIM card isn't used; else 4 bits. */ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, }, { .mmc = 2, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, }, {} /* Terminator */ }; static int sdp3430_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ), * gpio + 1 is "mmc1_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; mmc[1].gpio_cd = gpio + 1; omap2_hsmmc_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ gpio_request(gpio + 7, "sub_lcd_en_bkl"); gpio_direction_output(gpio + 7, 0); /* gpio + 15 is "sub_lcd_nRST" (output) */ gpio_request(gpio + 15, "sub_lcd_nRST"); gpio_direction_output(gpio + 15, 0); return 0; } static struct twl4030_gpio_platform_data sdp3430_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(16) | BIT(17), .setup = sdp3430_twl_gpio_setup, }; static struct twl4030_usb_data sdp3430_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; static struct twl4030_madc_platform_data sdp3430_madc_data = { .irq_line = 1, }; /* regulator consumer mappings */ /* ads7846 on SPI */ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), }; static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), }; /* VPLL2 for digital video outputs */ static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; static struct regulator_consumer_supply sdp3430_vsim_supplies[] = { REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; /* * Apply all the fixed voltages since most versions of U-Boot * don't bother with that initialization. */ /* VAUX1 for mainboard (irda and sub-lcd) */ static struct regulator_init_data sdp3430_vaux1 = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, }; /* VAUX2 for camera module */ static struct regulator_init_data sdp3430_vaux2 = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, }; /* VAUX3 for LCD board */ static struct regulator_init_data sdp3430_vaux3 = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), .consumer_supplies = sdp3430_vaux3_supplies, }; /* VAUX4 for OMAP VDD_CSI2 (camera) */ static struct regulator_init_data sdp3430_vaux4 = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data sdp3430_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies), .consumer_supplies = sdp3430_vmmc1_supplies, }; /* VMMC2 for MMC2 card */ static struct regulator_init_data sdp3430_vmmc2 = { .constraints = { .min_uV = 1850000, .max_uV = 1850000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies), .consumer_supplies = sdp3430_vmmc2_supplies, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ static struct regulator_init_data sdp3430_vsim = { .constraints = { .min_uV = 1800000, .max_uV = 3000000, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies), .consumer_supplies = sdp3430_vsim_supplies, }; /* VDAC for DSS driving S-Video */ static struct regulator_init_data sdp3430_vdac = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies), .consumer_supplies = sdp3430_vdda_dac_supplies, }; static struct regulator_init_data sdp3430_vpll2 = { .constraints = { .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), .consumer_supplies = sdp3430_vpll2_supplies, }; static struct twl4030_codec_audio_data sdp3430_audio; static struct twl4030_codec_data sdp3430_codec = { .audio_mclk = 26000000, .audio = &sdp3430_audio, }; static struct twl4030_platform_data sdp3430_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .bci = &sdp3430_bci_data, .gpio = &sdp3430_gpio_data, .madc = &sdp3430_madc_data, .keypad = &sdp3430_kp_data, .usb = &sdp3430_usb_data, .codec = &sdp3430_codec, .vaux1 = &sdp3430_vaux1, .vaux2 = &sdp3430_vaux2, .vaux3 = &sdp3430_vaux3, .vaux4 = &sdp3430_vaux4, .vmmc1 = &sdp3430_vmmc1, .vmmc2 = &sdp3430_vmmc2, .vsim = &sdp3430_vsim, .vdac = &sdp3430_vdac, .vpll2 = &sdp3430_vpll2, }; static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ omap_register_i2c_bus(3, 400, NULL, 0); return 0; } #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 3, .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, }; static void __init board_smc91x_init(void) { if (omap_rev() > OMAP3430_REV_ES1_0) board_smc91x_data.gpio_irq = 6; else board_smc91x_data.gpio_irq = 29; gpmc_smc91x_init(&board_smc91x_data); } #else static inline void board_smc91x_init(void) { } #endif static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */ omap_mux_init_signal("sys_nirq", OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, .reset_gpio_port[1] = 61, .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; static struct omap_device_pad serial1_pads[] __initdata = { /* * Note that off output enable is an active low * signal. So setting this means pin is a * input enabled in off mode */ OMAP_MUX_STATIC("uart1_cts.uart1_cts", OMAP_PIN_INPUT | OMAP_PIN_OFF_INPUT_PULLDOWN | OMAP_OFFOUT_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart1_rts.uart1_rts", OMAP_PIN_OUTPUT | OMAP_OFF_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart1_rx.uart1_rx", OMAP_PIN_INPUT | OMAP_PIN_OFF_INPUT_PULLDOWN | OMAP_OFFOUT_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart1_tx.uart1_tx", OMAP_PIN_OUTPUT | OMAP_OFF_EN | OMAP_MUX_MODE0), }; static struct omap_device_pad serial2_pads[] __initdata = { OMAP_MUX_STATIC("uart2_cts.uart2_cts", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_INPUT_PULLDOWN | OMAP_OFFOUT_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart2_rts.uart2_rts", OMAP_PIN_OUTPUT | OMAP_OFF_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart2_rx.uart2_rx", OMAP_PIN_INPUT | OMAP_PIN_OFF_INPUT_PULLDOWN | OMAP_OFFOUT_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart2_tx.uart2_tx", OMAP_PIN_OUTPUT | OMAP_OFF_EN | OMAP_MUX_MODE0), }; static struct omap_device_pad serial3_pads[] __initdata = { OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", OMAP_PIN_INPUT_PULLDOWN | OMAP_PIN_OFF_INPUT_PULLDOWN | OMAP_OFFOUT_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", OMAP_PIN_OUTPUT | OMAP_OFF_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", OMAP_PIN_INPUT | OMAP_PIN_OFF_INPUT_PULLDOWN | OMAP_OFFOUT_EN | OMAP_MUX_MODE0), OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", OMAP_PIN_OUTPUT | OMAP_OFF_EN | OMAP_MUX_MODE0), }; static struct omap_board_data serial1_data = { .id = 0, .pads = serial1_pads, .pads_cnt = ARRAY_SIZE(serial1_pads), }; static struct omap_board_data serial2_data = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; static struct omap_board_data serial3_data = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; static inline void board_serial_init(void) { omap_serial_init_port(&serial1_data); omap_serial_init_port(&serial2_data); omap_serial_init_port(&serial3_data); } #else #define board_mux NULL static inline void board_serial_init(void) { omap_serial_init(); } #endif /* * SDP3430 V2 Board CS organization * Different from SDP3430 V1. Now 4 switches used to specify CS * * See also the Switch S8 settings in the comments. */ static char chip_sel_3430[][GPMC_CS_NUM] = { {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ }; static struct mtd_partition sdp_nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "Bootloader-NOR", .offset = 0, .size = SZ_256K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next sector */ { .name = "Params-NOR", .offset = MTDPART_OFS_APPEND, .size = SZ_256K, .mask_flags = 0, }, /* kernel */ { .name = "Kernel-NOR", .offset = MTDPART_OFS_APPEND, .size = SZ_2M, .mask_flags = 0 }, /* file system */ { .name = "Filesystem-NOR", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0 } }; static struct mtd_partition sdp_onenand_partitions[] = { { .name = "X-Loader-OneNAND", .offset = 0, .size = 4 * (64 * 2048), .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "U-Boot-OneNAND", .offset = MTDPART_OFS_APPEND, .size = 2 * (64 * 2048), .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "U-Boot Environment-OneNAND", .offset = MTDPART_OFS_APPEND, .size = 1 * (64 * 2048), }, { .name = "Kernel-OneNAND", .offset = MTDPART_OFS_APPEND, .size = 16 * (64 * 2048), }, { .name = "File System-OneNAND", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, }; static struct mtd_partition sdp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { .name = "X-Loader-NAND", .offset = 0, .size = 4 * (64 * 2048), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "U-Boot-NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ .size = 10 * (64 * 2048), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "Boot Env-NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ .size = 6 * (64 * 2048), }, { .name = "Kernel-NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ .size = 40 * (64 * 2048), }, { .name = "File System - NAND", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */ }, }; static struct flash_partitions sdp_flash_partitions[] = { { .parts = sdp_nor_partitions, .nr_parts = ARRAY_SIZE(sdp_nor_partitions), }, { .parts = sdp_onenand_partitions, .nr_parts = ARRAY_SIZE(sdp_onenand_partitions), }, { .parts = sdp_nand_partitions, .nr_parts = ARRAY_SIZE(sdp_nand_partitions), }, }; static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, .mode = MUSB_OTG, .power = 100, }; static void __init omap_3430sdp_init(void) { int gpio_pendown; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); usb_musb_init(&musb_board_data); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_3430sdp_init_early, .init_irq = omap_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap_timer, MACHINE_END