/* * Driver for loading USB isight firmware * * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * The USB isight cameras in recent Apples are roughly compatible with the USB * video class specification, and can be driven by uvcvideo. However, they * need firmware to be loaded beforehand. After firmware loading, the device * detaches from the USB bus and reattaches with a new device ID. It can then * be claimed by the uvc driver. * * The firmware is non-free and must be extracted by the user. Tools to do this * are available at http://bersace03.free.fr/ift/ * * The isight firmware loading was reverse engineered by Johannes Berg * <johannes@sipsolutions.de>, and this driver is based on code by Ronald * Bultje <rbultje@ronald.bitfreak.net> */ #include <linux/usb.h> #include <linux/firmware.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/slab.h> static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05ac, 0x8300)}, {}, }; MODULE_DEVICE_TABLE(usb, id_table); static int isight_firmware_load(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); int llen, len, req, ret = 0; const struct firmware *firmware; unsigned char *buf = kmalloc(50, GFP_KERNEL); unsigned char data[4]; const u8 *ptr; if (!buf) return -ENOMEM; if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { printk(KERN_ERR "Unable to load isight firmware\n"); ret = -ENODEV; goto out; } ptr = firmware->data; buf[0] = 0x01; if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1, 300) != 1) { printk(KERN_ERR "Failed to initialise isight firmware loader\n"); ret = -ENODEV; goto out; } while (ptr+4 <= firmware->data+firmware->size) { memcpy(data, ptr, 4); len = (data[0] << 8 | data[1]); req = (data[2] << 8 | data[3]); ptr += 4; if (len == 0x8001) break; /* success */ else if (len == 0) continue; for (; len > 0; req += 50) { llen = min(len, 50); len -= llen; if (ptr+llen > firmware->data+firmware->size) { printk(KERN_ERR "Malformed isight firmware"); ret = -ENODEV; goto out; } memcpy(buf, ptr, llen); ptr += llen; if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0, buf, llen, 300) != llen) { printk(KERN_ERR "Failed to load isight firmware\n"); ret = -ENODEV; goto out; } } } buf[0] = 0x00; if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1, 300) != 1) { printk(KERN_ERR "isight firmware loading completion failed\n"); ret = -ENODEV; } out: kfree(buf); release_firmware(firmware); return ret; } MODULE_FIRMWARE("isight.fw"); static void isight_firmware_disconnect(struct usb_interface *intf) { } static struct usb_driver isight_firmware_driver = { .name = "isight_firmware", .probe = isight_firmware_load, .disconnect = isight_firmware_disconnect, .id_table = id_table, }; module_usb_driver(isight_firmware_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");