/* * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ #include #include / { memory { reg = <0x10000000 0x40000000>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_usb_otg_vbus: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; }; reg_usb_h1_vbus: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 0>; enable-active-high; }; reg_audio: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "wm8962-supply"; gpio = <&gpio4 10 0>; enable-active-high; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; gpio-key,wakeup; linux,code = ; }; volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; gpio-key,wakeup; linux,code = ; }; volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; gpio-key,wakeup; linux,code = ; }; }; sound { compatible = "fsl,imx6q-sabresd-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; ssi-controller = <&ssi2>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "MICBIAS", "AMIC", "IN3R", "MICBIAS", "DMIC", "MICBIAS", "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; status = "okay"; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; red { gpios = <&gpio1 2 0>; default-state = "on"; }; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 9 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32"; spi-max-frequency = <20000000>; reg = <0>; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 25 0>; status = "okay"; }; &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clks 201>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; CPVDD-supply = <®_audio>; MICVDD-supply = <®_audio>; PLLVDD-supply = <®_audio>; SPKVDD1-supply = <®_audio>; SPKVDD2-supply = <®_audio>; gpio-cfg = < 0x0000 /* 0:Default */ 0x0000 /* 1:Default */ 0x0013 /* 2:FN_DMICCLK */ 0x0000 /* 3:Default */ 0x8014 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen2_reg: vgen2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio6>; interrupts = <7 2>; wakeup-gpios = <&gpio6 7 0>; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx6qdl-sabresd { pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 >; }; pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; }; gpio_leds { pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 >; }; }; }; &ldb { status = "okay"; lvds-channel@1 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; status = "okay"; display-timings { native-mode = <&timing0>; timing0: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; hback-porch = <220>; hfront-porch = <40>; vback-porch = <21>; vfront-porch = <7>; hsync-len = <60>; vsync-len = <10>; }; }; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 0>; status = "okay"; }; &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; status = "okay"; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; cd-gpios = <&gpio2 2 0>; wp-gpios = <&gpio2 3 0>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; cd-gpios = <&gpio2 0 0>; wp-gpios = <&gpio2 1 0>; status = "okay"; };