/* * Afatech AF9035 DVB USB driver * * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #ifndef AF9035_H #define AF9035_H #include "dvb_usb.h" #include "af9033.h" #include "tua9001.h" #include "fc0011.h" #include "fc0012.h" #include "mxl5007t.h" #include "tda18218.h" #include "fc2580.h" #include "it913x.h" struct reg_val { u32 reg; u8 val; }; struct reg_val_mask { u32 reg; u8 val; u8 mask; }; struct usb_req { u8 cmd; u8 mbox; u8 wlen; u8 *wbuf; u8 rlen; u8 *rbuf; }; struct state { #define BUF_LEN 64 u8 buf[BUF_LEN]; u8 seq; /* packet sequence number */ u8 prechip_version; u8 chip_version; u16 chip_type; u8 dual_mode:1; u16 eeprom_addr; struct af9033_config af9033_config[2]; }; static const u32 clock_lut_af9035[] = { 20480000, /* FPGA */ 16384000, /* 16.38 MHz */ 20480000, /* 20.48 MHz */ 36000000, /* 36.00 MHz */ 30000000, /* 30.00 MHz */ 26000000, /* 26.00 MHz */ 28000000, /* 28.00 MHz */ 32000000, /* 32.00 MHz */ 34000000, /* 34.00 MHz */ 24000000, /* 24.00 MHz */ 22000000, /* 22.00 MHz */ 12000000, /* 12.00 MHz */ }; static const u32 clock_lut_it9135[] = { 12000000, /* 12.00 MHz */ 20480000, /* 20.48 MHz */ 36000000, /* 36.00 MHz */ 30000000, /* 30.00 MHz */ 26000000, /* 26.00 MHz */ 28000000, /* 28.00 MHz */ 32000000, /* 32.00 MHz */ 34000000, /* 34.00 MHz */ 24000000, /* 24.00 MHz */ 22000000, /* 22.00 MHz */ }; #define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw" #define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw" #define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw" /* * eeprom is memory mapped as read only. Writing that memory mapped address * will not corrupt eeprom. * * eeprom has value 0x00 single mode and 0x03 for dual mode as far as I have * seen to this day. */ #define EEPROM_BASE_AF9035 0x42fd #define EEPROM_BASE_IT9135 0x499c #define EEPROM_SHIFT 0x10 #define EEPROM_IR_MODE 0x10 #define EEPROM_DUAL_MODE 0x29 #define EEPROM_2ND_DEMOD_ADDR 0x2a #define EEPROM_IR_TYPE 0x2c #define EEPROM_1_IF_L 0x30 #define EEPROM_1_IF_H 0x31 #define EEPROM_1_TUNER_ID 0x34 #define EEPROM_2_IF_L 0x40 #define EEPROM_2_IF_H 0x41 #define EEPROM_2_TUNER_ID 0x44 /* USB commands */ #define CMD_MEM_RD 0x00 #define CMD_MEM_WR 0x01 #define CMD_I2C_RD 0x02 #define CMD_I2C_WR 0x03 #define CMD_IR_GET 0x18 #define CMD_FW_DL 0x21 #define CMD_FW_QUERYINFO 0x22 #define CMD_FW_BOOT 0x23 #define CMD_FW_DL_BEGIN 0x24 #define CMD_FW_DL_END 0x25 #define CMD_FW_SCATTER_WR 0x29 #endif