#! /bin/sh # # Turtle Beach MultiSound Driver Notes # -- Andrew Veliath <andrewtv@usa.net> # # Last update: September 10, 1998 # Corresponding msnd driver: 0.8.3 # # ** This file is a README (top part) and shell archive (bottom part). # The corresponding archived utility sources can be unpacked by # running `sh MultiSound' (the utilities are only needed for the # Pinnacle and Fiji cards). ** # # # -=-=- Getting Firmware -=-=- # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # See the section `Obtaining and Creating Firmware Files' in this # document for instructions on obtaining the necessary firmware # files. # # # Supported Features # ~~~~~~~~~~~~~~~~~~ # # Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is # not currently available) and mixer functionality (/dev/mixer) are # supported (memory mapped digital audio is not yet supported). # Digital transfers and monitoring can be done as well if you have # the digital daughterboard (see the section on using the S/PDIF port # for more information). # # Support for the Turtle Beach MultiSound Hurricane architecture is # composed of the following modules (these can also operate compiled # into the kernel): # # msnd - MultiSound base (requires soundcore) # # msnd_classic - Base audio/mixer support for Classic, Monetery and # Tahiti cards # # msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards # # # Important Notes - Read Before Using # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # The firmware files are not included (may change in future). You # must obtain these images from Turtle Beach (they are included in # the MultiSound Development Kits), and place them in /etc/sound for # example, and give the full paths in the Linux configuration. If # you are compiling in support for the MultiSound driver rather than # using it as a module, these firmware files must be accessible # during kernel compilation. # # Please note these files must be binary files, not assembler. See # the section later in this document for instructions to obtain these # files. # # # Configuring Card Resources # ~~~~~~~~~~~~~~~~~~~~~~~~~~ # # ** This section is very important, as your card may not work at all # or your machine may crash if you do not do this correctly. ** # # * Classic/Monterey/Tahiti # # These cards are configured through the driver msnd_classic. You must # know the io port, then the driver will select the irq and memory resources # on the card. It is up to you to know if these are free locations or now, # a conflict can lock the machine up. # # * Pinnacle/Fiji # # The Pinnacle and Fiji cards have an extra config port, either # 0x250, 0x260 or 0x270. This port can be disabled to have the card # configured strictly through PnP, however you lose the ability to # access the IDE controller and joystick devices on this card when # using PnP. The included pinnaclecfg program in this shell archive # can be used to configure the card in non-PnP mode, and in PnP mode # you can use isapnptools. These are described briefly here. # # pinnaclecfg is not required; you can use the msnd_pinnacle module # to fully configure the card as well. However, pinnaclecfg can be # used to change the resource values of a particular device after the # msnd_pinnacle module has been loaded. If you are compiling the # driver into the kernel, you must set these values during compile # time, however other peripheral resource values can be changed with # the pinnaclecfg program after the kernel is loaded. # # # *** PnP mode # # Use pnpdump to obtain a sample configuration if you can; I was able # to obtain one with the command `pnpdump 1 0x203' -- this may vary # for you (running pnpdump by itself did not work for me). Then, # edit this file and use isapnp to uncomment and set the card values. # Use these values when inserting the msnd_pinnacle module. Using # this method, you can set the resources for the DSP and the Kurzweil # synth (Pinnacle). Since Linux does not directly support PnP # devices, you may have difficulty when using the card in PnP mode # when it the driver is compiled into the kernel. Using non-PnP mode # is preferable in this case. # # Here is an example mypinnacle.conf for isapnp that sets the card to # io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil # synth to 0x330 and irq 9 (may need editing for your system): # # (READPORT 0x0203) # (CSN 2) # (IDENTIFY *) # # # DSP # (CONFIGURE BVJ0440/-1 (LD 0 # (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000)) # (ACT Y))) # # # Kurzweil Synth (Pinnacle Only) # (CONFIGURE BVJ0440/-1 (LD 1 # (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E))) # (ACT Y))) # # (WAITFORKEY) # # # *** Non-PnP mode # # The second way is by running the card in non-PnP mode. This # actually has some advantages in that you can access some other # devices on the card, such as the joystick and IDE controller. To # configure the card, unpack this shell archive and build the # pinnaclecfg program. Using this program, you can assign the # resource values to the card's devices, or disable the devices. As # an alternative to using pinnaclecfg, you can specify many of the # configuration values when loading the msnd_pinnacle module (or # during kernel configuration when compiling the driver into the # kernel). # # If you specify cfg=0x250 for the msnd_pinnacle module, it # automatically configure the card to the given io, irq and memory # values using that config port (the config port is jumper selectable # on the card to 0x250, 0x260 or 0x270). # # See the `msnd_pinnacle Additional Options' section below for more # information on these parameters (also, if you compile the driver # directly into the kernel, these extra parameters can be useful # here). # # # ** It is very easy to cause problems in your machine if you choose a # resource value which is incorrect. ** # # # Examples # ~~~~~~~~ # # * MultiSound Classic/Monterey/Tahiti: # # modprobe soundcore # insmod msnd # insmod msnd_classic io=0x290 irq=7 mem=0xd0000 # # * MultiSound Pinnacle in PnP mode: # # modprobe soundcore # insmod msnd # isapnp mypinnacle.conf # insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values # # * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port, # one of 0x250, 0x260 or 0x270): # # insmod soundcore # insmod msnd # insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 # # * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP # mode, add the following (assumes you did `isapnp mypinnacle.conf'): # # insmod sound # insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values # # * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP # mode, add the following. Note how we first configure the peripheral's # resources, _then_ install a Linux driver for it: # # insmod sound # pinnaclecfg 0x250 mpu 0x330 9 # insmod mpu401 io=0x330 irq=9 # # -- OR you can use the following sequence without pinnaclecfg in non-PnP mode: # # insmod soundcore # insmod msnd # insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9 # insmod sound # insmod mpu401 io=0x330 irq=9 # # * To setup the joystick port on the Pinnacle in non-PnP mode (though # you have to find the actual Linux joystick driver elsewhere), you # can use pinnaclecfg: # # pinnaclecfg 0x250 joystick 0x200 # # -- OR you can configure this using msnd_pinnacle with the following: # # insmod soundcore # insmod msnd # insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200 # # # msnd_classic, msnd_pinnacle Required Options # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # If the following options are not given, the module will not load. # Examine the kernel message log for informative error messages. # WARNING--probing isn't supported so try to make sure you have the # correct shared memory area, otherwise you may experience problems. # # io I/O base of DSP, e.g. io=0x210 # irq IRQ number, e.g. irq=5 # mem Shared memory area, e.g. mem=0xd8000 # # # msnd_classic, msnd_pinnacle Additional Options # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # fifosize The digital audio FIFOs, in kilobytes. If not # specified, the default will be used. Increasing # this value will reduce the chance of a FIFO # underflow at the expense of increasing overall # latency. For example, fifosize=512 will # allocate 512kB read and write FIFOs (1MB total). # While this may reduce dropouts, a heavy machine # load will undoubtedly starve the FIFO of data # and you will eventually get dropouts. One # option is to alter the scheduling priority of # the playback process, using `nice' or some form # of POSIX soft real-time scheduling. # # calibrate_signal Setting this to one calibrates the ADCs to the # signal, zero calibrates to the card (defaults # to zero). # # # msnd_pinnacle Additional Options # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # digital Specify digital=1 to enable the S/PDIF input # if you have the digital daughterboard # adapter. This will enable access to the # DIGITAL1 input for the soundcard in the mixer. # Some mixer programs might have trouble setting # the DIGITAL1 source as an input. If you have # trouble, you can try the setdigital.c program # at the bottom of this document. # # cfg Non-PnP configuration port for the Pinnacle # and Fiji (typically 0x250, 0x260 or 0x270, # depending on the jumper configuration). If # this option is omitted, then it is assumed # that the card is in PnP mode, and that the # specified DSP resource values are already # configured with PnP (i.e. it won't attempt to # do any sort of configuration). # # When the Pinnacle is in non-PnP mode, you can use the following # options to configure particular devices. If a full specification # for a device is not given, then the device is not configured. Note # that you still must use a Linux driver for any of these devices # once their resources are setup (such as the Linux joystick driver, # or the MPU401 driver from OSS for the Kurzweil synth). # # mpu_io I/O port of MPU (on-board Kurzweil synth) # mpu_irq IRQ of MPU (on-board Kurzweil synth) # ide_io0 First I/O port of IDE controller # ide_io1 Second I/O port of IDE controller # ide_irq IRQ IDE controller # joystick_io I/O port of joystick # # # Obtaining and Creating Firmware Files # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # For the Classic/Tahiti/Monterey # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # Download to /tmp and unzip the following file from Turtle Beach: # # ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip # # When unzipped, unzip the file named MsndFiles.zip. Then copy the # following firmware files to /etc/sound (note the file renaming): # # cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin # cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin # # When configuring the Linux kernel, specify /etc/sound/msndinit.bin and # /etc/sound/msndperm.bin for the two firmware files (Linux kernel # versions older than 2.2 do not ask for firmware paths, and are # hardcoded to /etc/sound). # # If you are compiling the driver into the kernel, these files must # be accessible during compilation, but will not be needed later. # The files must remain, however, if the driver is used as a module. # # # For the Pinnacle/Fiji # ~~~~~~~~~~~~~~~~~~~~~ # # Download to /tmp and unzip the following file from Turtle Beach (be # sure to use the entire URL; some have had trouble navigating to the # URL): # # ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip # # Unpack this shell archive, and run make in the created directory # (you need a C compiler and flex to build the utilities). This # should give you the executables conv, pinnaclecfg and setdigital. # conv is only used temporarily here to create the firmware files, # while pinnaclecfg is used to configure the Pinnacle or Fiji card in # non-PnP mode, and setdigital can be used to set the S/PDIF input on # the mixer (pinnaclecfg and setdigital should be copied to a # convenient place, possibly run during system initialization). # # To generating the firmware files with the `conv' program, we create # the binary firmware files by doing the following conversion # (assuming the archive unpacked into a directory named PINNDDK): # # ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin # ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin # # The conv (and conv.l) program is not needed after conversion and can # be safely deleted. Then, when configuring the Linux kernel, specify # /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two # firmware files (Linux kernel versions older than 2.2 do not ask for # firmware paths, and are hardcoded to /etc/sound). # # If you are compiling the driver into the kernel, these files must # be accessible during compilation, but will not be needed later. # The files must remain, however, if the driver is used as a module. # # # Using Digital I/O with the S/PDIF Port # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # If you have a Pinnacle or Fiji with the digital daughterboard and # want to set it as the input source, you can use this program if you # have trouble trying to do it with a mixer program (be sure to # insert the module with the digital=1 option, or say Y to the option # during compiled-in kernel operation). Upon selection of the S/PDIF # port, you should be able monitor and record from it. # # There is something to note about using the S/PDIF port. Digital # timing is taken from the digital signal, so if a signal is not # connected to the port and it is selected as recording input, you # will find PCM playback to be distorted in playback rate. Also, # attempting to record at a sampling rate other than the DAT rate may # be problematic (i.e. trying to record at 8000Hz when the DAT signal # is 44100Hz). If you have a problem with this, set the recording # input to analog if you need to record at a rate other than that of # the DAT rate. # # # -- Shell archive attached below, just run `sh MultiSound' to extract. # Contains Pinnacle/Fiji utilities to convert firmware, configure # in non-PnP mode, and select the DIGITAL1 input for the mixer. # # #!/bin/sh # This is a shell archive (produced by GNU sharutils 4.2). # To extract the files from this archive, save it to some FILE, remove # everything before the `!/bin/sh' line above, then type `sh FILE'. # # Made on 1998-12-04 10:07 EST by <andrewtv@ztransform.velsoft.com>. # Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'. # # Existing files will *not* be overwritten unless `-c' is specified. # # This shar contains: # length mode name # ------ ---------- ------------------------------------------ # 2046 -rw-rw-r-- MultiSound.d/setdigital.c # 10235 -rw-rw-r-- MultiSound.d/pinnaclecfg.c # 106 -rw-rw-r-- MultiSound.d/Makefile # 141 -rw-rw-r-- MultiSound.d/conv.l # 1472 -rw-rw-r-- MultiSound.d/msndreset.c # save_IFS="${IFS}" IFS="${IFS}:" gettext_dir=FAILED locale_dir=FAILED first_param="$1" for dir in $PATH do if test "$gettext_dir" = FAILED && test -f $dir/gettext \ && ($dir/gettext --version >/dev/null 2>&1) then set `$dir/gettext --version 2>&1` if test "$3" = GNU then gettext_dir=$dir fi fi if test "$locale_dir" = FAILED && test -f $dir/shar \ && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) then locale_dir=`$dir/shar --print-text-domain-dir` fi done IFS="$save_IFS" if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED then echo=echo else TEXTDOMAINDIR=$locale_dir export TEXTDOMAINDIR TEXTDOMAIN=sharutils export TEXTDOMAIN echo="$gettext_dir/gettext -s" fi touch -am 1231235999 $$.touch >/dev/null 2>&1 if test ! -f 1231235999 && test -f $$.touch; then shar_touch=touch else shar_touch=: echo $echo 'WARNING: not restoring timestamps. Consider getting and' $echo "installing GNU \`touch', distributed in GNU File Utilities..." echo fi rm -f 1231235999 $$.touch # if mkdir _sh01426; then $echo 'x -' 'creating lock directory' else $echo 'failed to create lock directory' exit 1 fi # ============= MultiSound.d/setdigital.c ============== if test ! -d 'MultiSound.d'; then $echo 'x -' 'creating directory' 'MultiSound.d' mkdir 'MultiSound.d' fi if test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then $echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)' else $echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)' sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' && /********************************************************************* X * X * setdigital.c - sets the DIGITAL1 input for a mixer X * X * Copyright (C) 1998 Andrew Veliath X * X * This program is free software; you can redistribute it and/or modify X * it under the terms of the GNU General Public License as published by X * the Free Software Foundation; either version 2 of the License, or X * (at your option) any later version. X * X * This program is distributed in the hope that it will be useful, X * but WITHOUT ANY WARRANTY; without even the implied warranty of X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the X * GNU General Public License for more details. X * X * You should have received a copy of the GNU General Public License X * along with this program; if not, write to the Free Software X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. X * X ********************************************************************/ X #include <stdio.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/soundcard.h> X int main(int argc, char *argv[]) { X int fd; X unsigned long recmask, recsrc; X X if (argc != 2) { X fprintf(stderr, "usage: setdigital <mixer device>\n"); X exit(1); X } X X if ((fd = open(argv[1], O_RDWR)) < 0) { X perror(argv[1]); X exit(1); X } X X if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) { X fprintf(stderr, "error: ioctl read recording mask failed\n"); X perror("ioctl"); X close(fd); X exit(1); X } X X if (!(recmask & SOUND_MASK_DIGITAL1)) { X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n"); X close(fd); X exit(1); X } X X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) { X fprintf(stderr, "error: ioctl read recording source failed\n"); X perror("ioctl"); X close(fd); X exit(1); X } X X recsrc |= SOUND_MASK_DIGITAL1; X X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) { X fprintf(stderr, "error: ioctl write recording source failed\n"); X perror("ioctl"); X close(fd); X exit(1); X } X X close(fd); X X return 0; } SHAR_EOF $shar_touch -am 1204092598 'MultiSound.d/setdigital.c' && chmod 0664 'MultiSound.d/setdigital.c' || $echo 'restore of' 'MultiSound.d/setdigital.c' 'failed' if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then md5sum -c << SHAR_EOF >/dev/null 2>&1 \ || $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed' e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.c SHAR_EOF else shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`" test 2046 -eq "$shar_count" || $echo 'MultiSound.d/setdigital.c:' 'original size' '2046,' 'current size' "$shar_count!" fi fi # ============= MultiSound.d/pinnaclecfg.c ============== if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then $echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)' else $echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)' sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' && /********************************************************************* X * X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration Program X * X * This is for NON-PnP mode only. For PnP mode, use isapnptools. X * X * This is Linux-specific, and must be run with root permissions. X * X * Part of the Turtle Beach MultiSound Sound Card Driver for Linux X * X * Copyright (C) 1998 Andrew Veliath X * X * This program is free software; you can redistribute it and/or modify X * it under the terms of the GNU General Public License as published by X * the Free Software Foundation; either version 2 of the License, or X * (at your option) any later version. X * X * This program is distributed in the hope that it will be useful, X * but WITHOUT ANY WARRANTY; without even the implied warranty of X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the X * GNU General Public License for more details. X * X * You should have received a copy of the GNU General Public License X * along with this program; if not, write to the Free Software X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. X * X ********************************************************************/ X #include <stdio.h> #include <stdlib.h> #include <string.h> #include <errno.h> #include <unistd.h> #include <asm/io.h> #include <asm/types.h> X #define IREG_LOGDEVICE 0x07 #define IREG_ACTIVATE 0x30 #define LD_ACTIVATE 0x01 #define LD_DISACTIVATE 0x00 #define IREG_EECONTROL 0x3F #define IREG_MEMBASEHI 0x40 #define IREG_MEMBASELO 0x41 #define IREG_MEMCONTROL 0x42 #define IREG_MEMRANGEHI 0x43 #define IREG_MEMRANGELO 0x44 #define MEMTYPE_8BIT 0x00 #define MEMTYPE_16BIT 0x02 #define MEMTYPE_RANGE 0x00 #define MEMTYPE_HIADDR 0x01 #define IREG_IO0_BASEHI 0x60 #define IREG_IO0_BASELO 0x61 #define IREG_IO1_BASEHI 0x62 #define IREG_IO1_BASELO 0x63 #define IREG_IRQ_NUMBER 0x70 #define IREG_IRQ_TYPE 0x71 #define IRQTYPE_HIGH 0x02 #define IRQTYPE_LOW 0x00 #define IRQTYPE_LEVEL 0x01 #define IRQTYPE_EDGE 0x00 X #define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF)) #define LOBYTE(w) ((BYTE)(w)) #define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8))) X typedef __u8 BYTE; typedef __u16 USHORT; typedef __u16 WORD; X static int config_port = -1; X static int msnd_write_cfg(int cfg, int reg, int value) { X outb(reg, cfg); X outb(value, cfg + 1); X if (value != inb(cfg + 1)) { X fprintf(stderr, "error: msnd_write_cfg: I/O error\n"); X return -EIO; X } X return 0; } X static int msnd_read_cfg(int cfg, int reg) { X outb(reg, cfg); X return inb(cfg + 1); } X static int msnd_write_cfg_io0(int cfg, int num, WORD io) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io))) X return -EIO; X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io))) X return -EIO; X return 0; } X static int msnd_read_cfg_io0(int cfg, int num, WORD *io) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO), X msnd_read_cfg(cfg, IREG_IO0_BASEHI)); X X return 0; } X static int msnd_write_cfg_io1(int cfg, int num, WORD io) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io))) X return -EIO; X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io))) X return -EIO; X return 0; } X static int msnd_read_cfg_io1(int cfg, int num, WORD *io) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO), X msnd_read_cfg(cfg, IREG_IO1_BASEHI)); X X return 0; } X static int msnd_write_cfg_irq(int cfg, int num, WORD irq) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq))) X return -EIO; X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE)) X return -EIO; X return 0; } X static int msnd_read_cfg_irq(int cfg, int num, WORD *irq) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER); X X return 0; } X static int msnd_write_cfg_mem(int cfg, int num, int mem) { X WORD wmem; X X mem >>= 8; X mem &= 0xfff; X wmem = (WORD)mem; X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem))) X return -EIO; X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem))) X return -EIO; X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT))) X return -EIO; X return 0; } X static int msnd_read_cfg_mem(int cfg, int num, int *mem) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X X *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO), X msnd_read_cfg(cfg, IREG_MEMBASEHI)); X *mem <<= 8; X X return 0; } X static int msnd_activate_logical(int cfg, int num) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE)) X return -EIO; X return 0; } X static int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_write_cfg_io0(cfg, num, io0)) X return -EIO; X if (msnd_write_cfg_io1(cfg, num, io1)) X return -EIO; X if (msnd_write_cfg_irq(cfg, num, irq)) X return -EIO; X if (msnd_write_cfg_mem(cfg, num, mem)) X return -EIO; X if (msnd_activate_logical(cfg, num)) X return -EIO; X return 0; } X static int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem) { X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) X return -EIO; X if (msnd_read_cfg_io0(cfg, num, io0)) X return -EIO; X if (msnd_read_cfg_io1(cfg, num, io1)) X return -EIO; X if (msnd_read_cfg_irq(cfg, num, irq)) X return -EIO; X if (msnd_read_cfg_mem(cfg, num, mem)) X return -EIO; X return 0; } X static void usage(void) { X fprintf(stderr, X "\n" X "pinnaclecfg 1.0\n" X "\n" X "usage: pinnaclecfg <config port> [device config]\n" X "\n" X "This is for use with the card in NON-PnP mode only.\n" X "\n" X "Available devices (not all available for Fiji):\n" X "\n" X " Device Description\n" X " -------------------------------------------------------------------\n" X " reset Reset all devices (i.e. disable)\n" X " show Display current device configurations\n" X "\n" X " dsp <io> <irq> <mem> Audio device\n" X " mpu <io> <irq> Internal Kurzweil synth\n" X " ide <io0> <io1> <irq> On-board IDE controller\n" X " joystick <io> Joystick port\n" X "\n"); X exit(1); } X static int cfg_reset(void) { X int i; X X for (i = 0; i < 4; ++i) X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0); X X return 0; } X static int cfg_show(void) { X int i; X int count = 0; X X for (i = 0; i < 4; ++i) { X WORD io0, io1, irq; X int mem; X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem); X switch (i) { X case 0: X if (io0 || irq || mem) { X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem); X ++count; X } X break; X case 1: X if (io0 || irq) { X printf("mpu 0x%x %d\n", io0, irq); X ++count; X } X break; X case 2: X if (io0 || io1 || irq) { X printf("ide 0x%x 0x%x %d\n", io0, io1, irq); X ++count; X } X break; X case 3: X if (io0) { X printf("joystick 0x%x\n", io0); X ++count; X } X break; X } X } X X if (count == 0) X fprintf(stderr, "no devices configured\n"); X X return 0; } X static int cfg_dsp(int argc, char *argv[]) { X int io, irq, mem; X X if (argc < 3 || X sscanf(argv[0], "0x%x", &io) != 1 || X sscanf(argv[1], "%d", &irq) != 1 || X sscanf(argv[2], "0x%x", &mem) != 1) X usage(); X X if (!(io == 0x290 || X io == 0x260 || X io == 0x250 || X io == 0x240 || X io == 0x230 || X io == 0x220 || X io == 0x210 || X io == 0x3e0)) { X fprintf(stderr, "error: io must be one of " X "210, 220, 230, 240, 250, 260, 290, or 3E0\n"); X usage(); X } X X if (!(irq == 5 || X irq == 7 || X irq == 9 || X irq == 10 || X irq == 11 || X irq == 12)) { X fprintf(stderr, "error: irq must be one of " X "5, 7, 9, 10, 11 or 12\n"); X usage(); X } X X if (!(mem == 0xb0000 || X mem == 0xc8000 || X mem == 0xd0000 || X mem == 0xd8000 || X mem == 0xe0000 || X mem == 0xe8000)) { X fprintf(stderr, "error: mem must be one of " X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n"); X usage(); X } X X return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem); } X static int cfg_mpu(int argc, char *argv[]) { X int io, irq; X X if (argc < 2 || X sscanf(argv[0], "0x%x", &io) != 1 || X sscanf(argv[1], "%d", &irq) != 1) X usage(); X X return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0); } X static int cfg_ide(int argc, char *argv[]) { X int io0, io1, irq; X X if (argc < 3 || X sscanf(argv[0], "0x%x", &io0) != 1 || X sscanf(argv[0], "0x%x", &io1) != 1 || X sscanf(argv[1], "%d", &irq) != 1) X usage(); X X return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0); } X static int cfg_joystick(int argc, char *argv[]) { X int io; X X if (argc < 1 || X sscanf(argv[0], "0x%x", &io) != 1) X usage(); X X return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0); } X int main(int argc, char *argv[]) { X char *device; X int rv = 0; X X --argc; ++argv; X X if (argc < 2) X usage(); X X sscanf(argv[0], "0x%x", &config_port); X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) { X fprintf(stderr, "error: <config port> must be 0x250, 0x260 or 0x270\n"); X exit(1); X } X if (ioperm(config_port, 2, 1)) { X perror("ioperm"); X fprintf(stderr, "note: pinnaclecfg must be run as root\n"); X exit(1); X } X device = argv[1]; X X argc -= 2; argv += 2; X X if (strcmp(device, "reset") == 0) X rv = cfg_reset(); X else if (strcmp(device, "show") == 0) X rv = cfg_show(); X else if (strcmp(device, "dsp") == 0) X rv = cfg_dsp(argc, argv); X else if (strcmp(device, "mpu") == 0) X rv = cfg_mpu(argc, argv); X else if (strcmp(device, "ide") == 0) X rv = cfg_ide(argc, argv); X else if (strcmp(device, "joystick") == 0) X rv = cfg_joystick(argc, argv); X else { X fprintf(stderr, "error: unknown device %s\n", device); X usage(); X } X X if (rv) X fprintf(stderr, "error: device configuration failed\n"); X X return 0; } SHAR_EOF $shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' && chmod 0664 'MultiSound.d/pinnaclecfg.c' || $echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed' if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then md5sum -c << SHAR_EOF >/dev/null 2>&1 \ || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed' 366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.c SHAR_EOF else shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`" test 10235 -eq "$shar_count" || $echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10235,' 'current size' "$shar_count!" fi fi # ============= MultiSound.d/Makefile ============== if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then $echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)' else $echo 'x -' extracting 'MultiSound.d/Makefile' '(text)' sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' && CC = gcc CFLAGS = -O PROGS = setdigital msndreset pinnaclecfg conv X all: $(PROGS) X clean: X rm -f $(PROGS) SHAR_EOF $shar_touch -am 1204092398 'MultiSound.d/Makefile' && chmod 0664 'MultiSound.d/Makefile' || $echo 'restore of' 'MultiSound.d/Makefile' 'failed' if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then md5sum -c << SHAR_EOF >/dev/null 2>&1 \ || $echo 'MultiSound.d/Makefile:' 'MD5 check failed' 76ca8bb44e3882edcf79c97df6c81845 MultiSound.d/Makefile SHAR_EOF else shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`" test 106 -eq "$shar_count" || $echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!" fi fi # ============= MultiSound.d/conv.l ============== if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then $echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)' else $echo 'x -' extracting 'MultiSound.d/conv.l' '(text)' sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' && %% [ \n\t,\r] \;.* DB [0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); } %% int yywrap() { return 1; } main() { yylex(); } SHAR_EOF $shar_touch -am 0828231798 'MultiSound.d/conv.l' && chmod 0664 'MultiSound.d/conv.l' || $echo 'restore of' 'MultiSound.d/conv.l' 'failed' if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then md5sum -c << SHAR_EOF >/dev/null 2>&1 \ || $echo 'MultiSound.d/conv.l:' 'MD5 check failed' d2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.l SHAR_EOF else shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`" test 141 -eq "$shar_count" || $echo 'MultiSound.d/conv.l:' 'original size' '141,' 'current size' "$shar_count!" fi fi # ============= MultiSound.d/msndreset.c ============== if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then $echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)' else $echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)' sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' && /********************************************************************* X * X * msndreset.c - resets the MultiSound card X * X * Copyright (C) 1998 Andrew Veliath X * X * This program is free software; you can redistribute it and/or modify X * it under the terms of the GNU General Public License as published by X * the Free Software Foundation; either version 2 of the License, or X * (at your option) any later version. X * X * This program is distributed in the hope that it will be useful, X * but WITHOUT ANY WARRANTY; without even the implied warranty of X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the X * GNU General Public License for more details. X * X * You should have received a copy of the GNU General Public License X * along with this program; if not, write to the Free Software X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. X * X ********************************************************************/ X #include <stdio.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/soundcard.h> X int main(int argc, char *argv[]) { X int fd; X X if (argc != 2) { X fprintf(stderr, "usage: msndreset <mixer device>\n"); X exit(1); X } X X if ((fd = open(argv[1], O_RDWR)) < 0) { X perror(argv[1]); X exit(1); X } X X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) { X fprintf(stderr, "error: msnd ioctl reset failed\n"); X perror("ioctl"); X close(fd); X exit(1); X } X X close(fd); X X return 0; } SHAR_EOF $shar_touch -am 1204100698 'MultiSound.d/msndreset.c' && chmod 0664 'MultiSound.d/msndreset.c' || $echo 'restore of' 'MultiSound.d/msndreset.c' 'failed' if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then md5sum -c << SHAR_EOF >/dev/null 2>&1 \ || $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed' c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.c SHAR_EOF else shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`" test 1472 -eq "$shar_count" || $echo 'MultiSound.d/msndreset.c:' 'original size' '1472,' 'current size' "$shar_count!" fi fi rm -fr _sh01426 exit 0