/* * Copyright 2008 Cisco Systems, Inc. All rights reserved. * Copyright 2007 Nuova Systems, Inc. All rights reserved. * * This program is free software; you may redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _FCPIO_H_ #define _FCPIO_H_ #include <linux/if_ether.h> /* * This header file includes all of the data structures used for * communication by the host driver to the fcp firmware. */ /* * Exchange and sequence id space allocated to the host driver */ #define FCPIO_HOST_EXCH_RANGE_START 0x1000 #define FCPIO_HOST_EXCH_RANGE_END 0x1fff #define FCPIO_HOST_SEQ_ID_RANGE_START 0x80 #define FCPIO_HOST_SEQ_ID_RANGE_END 0xff /* * Command entry type */ enum fcpio_type { /* * Initiator request types */ FCPIO_ICMND_16 = 0x1, FCPIO_ICMND_32, FCPIO_ICMND_CMPL, FCPIO_ITMF, FCPIO_ITMF_CMPL, /* * Target request types */ FCPIO_TCMND_16 = 0x11, FCPIO_TCMND_32, FCPIO_TDATA, FCPIO_TXRDY, FCPIO_TRSP, FCPIO_TDRSP_CMPL, FCPIO_TTMF, FCPIO_TTMF_ACK, FCPIO_TABORT, FCPIO_TABORT_CMPL, /* * Misc request types */ FCPIO_ACK = 0x20, FCPIO_RESET, FCPIO_RESET_CMPL, FCPIO_FLOGI_REG, FCPIO_FLOGI_REG_CMPL, FCPIO_ECHO, FCPIO_ECHO_CMPL, FCPIO_LUNMAP_CHNG, FCPIO_LUNMAP_REQ, FCPIO_LUNMAP_REQ_CMPL, FCPIO_FLOGI_FIP_REG, FCPIO_FLOGI_FIP_REG_CMPL, }; /* * Header status codes from the firmware */ enum fcpio_status { FCPIO_SUCCESS = 0, /* request was successful */ /* * If a request to the firmware is rejected, the original request * header will be returned with the status set to one of the following: */ FCPIO_INVALID_HEADER, /* header contains invalid data */ FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */ FCPIO_INVALID_PARAM, /* some parameter in request is invalid */ FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */ FCPIO_IO_NOT_FOUND, /* requested I/O was not found */ /* * Once a request is processed, the firmware will usually return * a cmpl message type. In cases where errors occurred, * the header status field would be filled in with one of the following: */ FCPIO_ABORTED = 0x41, /* request was aborted */ FCPIO_TIMEOUT, /* request was timed out */ FCPIO_SGL_INVALID, /* request was aborted due to sgl error */ FCPIO_MSS_INVALID, /* request was aborted due to mss error */ FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */ FCPIO_FW_ERR, /* request was terminated due to fw error */ FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */ FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */ FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */ FCPIO_CMND_REJECTED, /* request was invalid and rejected */ FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */ FCPIO_PATH_FAILED, /* i/o sent to current path failed */ FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */ }; /* * The header command tag. All host requests will use the "tag" field * to mark commands with a unique tag. When the firmware responds to * a host request, it will copy the tag field into the response. * * The only firmware requests that will use the rx_id/ox_id fields instead * of the tag field will be the target command and target task management * requests. These two requests do not have corresponding host requests * since they come directly from the FC initiator on the network. */ struct fcpio_tag { union { u32 req_id; struct { u16 rx_id; u16 ox_id; } ex_id; } u; }; static inline void fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id) { tag->u.req_id = id; } static inline void fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id) { *id = tag->u.req_id; } static inline void fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id) { tag->u.ex_id.rx_id = rx_id; tag->u.ex_id.ox_id = ox_id; } static inline void fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id) { *rx_id = tag->u.ex_id.rx_id; *ox_id = tag->u.ex_id.ox_id; } /* * The header for an fcpio request, whether from the firmware or from the * host driver */ struct fcpio_header { u8 type; /* enum fcpio_type */ u8 status; /* header status entry */ u16 _resvd; /* reserved */ struct fcpio_tag tag; /* header tag */ }; static inline void fcpio_header_enc(struct fcpio_header *hdr, u8 type, u8 status, struct fcpio_tag tag) { hdr->type = type; hdr->status = status; hdr->_resvd = 0; hdr->tag = tag; } static inline void fcpio_header_dec(struct fcpio_header *hdr, u8 *type, u8 *status, struct fcpio_tag *tag) { *type = hdr->type; *status = hdr->status; *tag = hdr->tag; } #define CDB_16 16 #define CDB_32 32 #define LUN_ADDRESS 8 /* * fcpio_icmnd_16: host -> firmware request * * used for sending out an initiator SCSI 16-byte command */ struct fcpio_icmnd_16 { u32 lunmap_id; /* index into lunmap table */ u8 special_req_flags; /* special exchange request flags */ u8 _resvd0[3]; /* reserved */ u32 sgl_cnt; /* scatter-gather list count */ u32 sense_len; /* sense buffer length */ u64 sgl_addr; /* scatter-gather list addr */ u64 sense_addr; /* sense buffer address */ u8 crn; /* SCSI Command Reference No. */ u8 pri_ta; /* SCSI Priority and Task attribute */ u8 _resvd1; /* reserved: should be 0 */ u8 flags; /* command flags */ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ u32 data_len; /* length of data expected */ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ u8 _resvd2; /* reserved */ u8 d_id[3]; /* FC vNIC only: Target D_ID */ u16 mss; /* FC vNIC only: max burst */ u16 _resvd3; /* reserved */ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */ }; /* * Special request flags */ #define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */ /* * Priority/Task Attribute settings */ #define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */ #define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */ #define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */ #define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */ #define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ /* * Command flags */ #define FCPIO_ICMND_RDDATA 0x02 /* read data */ #define FCPIO_ICMND_WRDATA 0x01 /* write data */ /* * fcpio_icmnd_32: host -> firmware request * * used for sending out an initiator SCSI 32-byte command */ struct fcpio_icmnd_32 { u32 lunmap_id; /* index into lunmap table */ u8 special_req_flags; /* special exchange request flags */ u8 _resvd0[3]; /* reserved */ u32 sgl_cnt; /* scatter-gather list count */ u32 sense_len; /* sense buffer length */ u64 sgl_addr; /* scatter-gather list addr */ u64 sense_addr; /* sense buffer address */ u8 crn; /* SCSI Command Reference No. */ u8 pri_ta; /* SCSI Priority and Task attribute */ u8 _resvd1; /* reserved: should be 0 */ u8 flags; /* command flags */ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ u32 data_len; /* length of data expected */ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ u8 _resvd2; /* reserved */ u8 d_id[3]; /* FC vNIC only: Target D_ID */ u16 mss; /* FC vNIC only: max burst */ u16 _resvd3; /* reserved */ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */ }; /* * fcpio_itmf: host -> firmware request * * used for requesting the firmware to abort a request and/or send out * a task management function * * The t_tag field is only needed when the request type is ABT_TASK. */ struct fcpio_itmf { u32 lunmap_id; /* index into lunmap table */ u32 tm_req; /* SCSI Task Management request */ u32 t_tag; /* header tag of fcpio to be aborted */ u32 _resvd; /* _reserved */ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ u8 _resvd1; /* reserved */ u8 d_id[3]; /* FC vNIC only: Target D_ID */ u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */ u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */ }; /* * Task Management request */ enum fcpio_itmf_tm_req_type { FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */ FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */ FCPIO_ITMF_ABT_TASK_SET, /* abort task set */ FCPIO_ITMF_CLR_TASK_SET, /* clear task set */ FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */ FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */ }; /* * fcpio_tdata: host -> firmware request * * used for requesting the firmware to send out a read data transfer for a * target command */ struct fcpio_tdata { u16 rx_id; /* FC rx_id of target command */ u16 flags; /* command flags */ u32 rel_offset; /* data sequence relative offset */ u32 sgl_cnt; /* scatter-gather list count */ u32 data_len; /* length of data expected to send */ u64 sgl_addr; /* scatter-gather list address */ }; /* * Command flags */ #define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */ /* * fcpio_txrdy: host -> firmware request * * used for requesting the firmware to send out a write data transfer for a * target command */ struct fcpio_txrdy { u16 rx_id; /* FC rx_id of target command */ u16 _resvd0; /* reserved */ u32 rel_offset; /* data sequence relative offset */ u32 sgl_cnt; /* scatter-gather list count */ u32 data_len; /* length of data expected to send */ u64 sgl_addr; /* scatter-gather list address */ }; /* * fcpio_trsp: host -> firmware request * * used for requesting the firmware to send out a response for a target * command */ struct fcpio_trsp { u16 rx_id; /* FC rx_id of target command */ u16 _resvd0; /* reserved */ u32 sense_len; /* sense data buffer length */ u64 sense_addr; /* sense data buffer address */ u16 _resvd1; /* reserved */ u8 flags; /* response request flags */ u8 scsi_status; /* SCSI status */ u32 residual; /* SCSI data residual value of I/O */ }; /* * resposnse request flags */ #define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */ #define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */ /* * fcpio_ttmf_ack: host -> firmware response * * used by the host to indicate to the firmware it has received and processed * the target tmf request */ struct fcpio_ttmf_ack { u16 rx_id; /* FC rx_id of target command */ u16 _resvd0; /* reserved */ u32 tmf_status; /* SCSI task management status */ }; /* * fcpio_tabort: host -> firmware request * * used by the host to request the firmware to abort a target request that was * received by the firmware */ struct fcpio_tabort { u16 rx_id; /* rx_id of the target request */ }; /* * fcpio_reset: host -> firmware request * * used by the host to signal a reset of the driver to the firmware * and to request firmware to clean up all outstanding I/O */ struct fcpio_reset { u32 _resvd; }; enum fcpio_flogi_reg_format_type { FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */ FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */ }; /* * fcpio_flogi_reg: host -> firmware request * * fc vnic only * used by the host to notify the firmware of the lif's s_id * and destination mac address format */ struct fcpio_flogi_reg { u8 format; u8 s_id[3]; /* FC vNIC only: Source S_ID */ u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */ u16 _resvd; u32 r_a_tov; /* R_A_TOV in msec */ u32 e_d_tov; /* E_D_TOV in msec */ }; /* * fcpio_echo: host -> firmware request * * sends a heartbeat echo request to the firmware */ struct fcpio_echo { u32 _resvd; }; /* * fcpio_lunmap_req: host -> firmware request * * scsi vnic only * sends a request to retrieve the lunmap table for scsi vnics */ struct fcpio_lunmap_req { u64 addr; /* address of the buffer */ u32 len; /* len of the buffer */ }; /* * fcpio_flogi_fip_reg: host -> firmware request * * fc vnic only * used by the host to notify the firmware of the lif's s_id * and destination mac address format */ struct fcpio_flogi_fip_reg { u8 _resvd0; u8 s_id[3]; /* FC vNIC only: Source S_ID */ u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */ u16 _resvd1; u32 r_a_tov; /* R_A_TOV in msec */ u32 e_d_tov; /* E_D_TOV in msec */ u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */ u16 _resvd2; }; /* * Basic structure for all fcpio structures that are sent from the host to the * firmware. They are 128 bytes per structure. */ #define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */ struct fcpio_host_req { struct fcpio_header hdr; union { /* * Defines space needed for request */ u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)]; /* * Initiator host requests */ struct fcpio_icmnd_16 icmnd_16; struct fcpio_icmnd_32 icmnd_32; struct fcpio_itmf itmf; /* * Target host requests */ struct fcpio_tdata tdata; struct fcpio_txrdy txrdy; struct fcpio_trsp trsp; struct fcpio_ttmf_ack ttmf_ack; struct fcpio_tabort tabort; /* * Misc requests */ struct fcpio_reset reset; struct fcpio_flogi_reg flogi_reg; struct fcpio_echo echo; struct fcpio_lunmap_req lunmap_req; struct fcpio_flogi_fip_reg flogi_fip_reg; } u; }; /* * fcpio_icmnd_cmpl: firmware -> host response * * used for sending the host a response to an initiator command */ struct fcpio_icmnd_cmpl { u8 _resvd0[6]; /* reserved */ u8 flags; /* response flags */ u8 scsi_status; /* SCSI status */ u32 residual; /* SCSI data residual length */ u32 sense_len; /* SCSI sense length */ }; /* * response flags */ #define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */ #define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */ /* * fcpio_itmf_cmpl: firmware -> host response * * used for sending the host a response for a itmf request */ struct fcpio_itmf_cmpl { u32 _resvd; /* reserved */ }; /* * fcpio_tcmnd_16: firmware -> host request * * used by the firmware to notify the host of an incoming target SCSI 16-Byte * request */ struct fcpio_tcmnd_16 { u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ u8 crn; /* SCSI Command Reference No. */ u8 pri_ta; /* SCSI Priority and Task attribute */ u8 _resvd2; /* reserved: should be 0 */ u8 flags; /* command flags */ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ u32 data_len; /* length of data expected */ u8 _resvd1; /* reserved */ u8 s_id[3]; /* FC vNIC only: Source S_ID */ }; /* * Priority/Task Attribute settings */ #define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */ #define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */ #define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */ #define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */ #define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ /* * Command flags */ #define FCPIO_TCMND_RDDATA 0x02 /* read data */ #define FCPIO_TCMND_WRDATA 0x01 /* write data */ /* * fcpio_tcmnd_32: firmware -> host request * * used by the firmware to notify the host of an incoming target SCSI 32-Byte * request */ struct fcpio_tcmnd_32 { u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ u8 crn; /* SCSI Command Reference No. */ u8 pri_ta; /* SCSI Priority and Task attribute */ u8 _resvd2; /* reserved: should be 0 */ u8 flags; /* command flags */ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ u32 data_len; /* length of data expected */ u8 _resvd0; /* reserved */ u8 s_id[3]; /* FC vNIC only: Source S_ID */ }; /* * fcpio_tdrsp_cmpl: firmware -> host response * * used by the firmware to notify the host of a response to a host target * command */ struct fcpio_tdrsp_cmpl { u16 rx_id; /* rx_id of the target request */ u16 _resvd0; /* reserved */ }; /* * fcpio_ttmf: firmware -> host request * * used by the firmware to notify the host of an incoming task management * function request */ struct fcpio_ttmf { u8 _resvd0; /* reserved */ u8 s_id[3]; /* FC vNIC only: Source S_ID */ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ u8 crn; /* SCSI Command Reference No. */ u8 _resvd2[3]; /* reserved */ u32 tmf_type; /* task management request type */ }; /* * Task Management request */ #define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */ #define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */ #define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */ #define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */ #define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */ /* * fcpio_tabort_cmpl: firmware -> host response * * used by the firmware to respond to a host's tabort request */ struct fcpio_tabort_cmpl { u16 rx_id; /* rx_id of the target request */ u16 _resvd0; /* reserved */ }; /* * fcpio_ack: firmware -> host response * * used by firmware to notify the host of the last work request received */ struct fcpio_ack { u16 request_out; /* last host entry received */ u16 _resvd; }; /* * fcpio_reset_cmpl: firmware -> host response * * use by firmware to respond to the host's reset request */ struct fcpio_reset_cmpl { u16 vnic_id; }; /* * fcpio_flogi_reg_cmpl: firmware -> host response * * fc vnic only * response to the fcpio_flogi_reg request */ struct fcpio_flogi_reg_cmpl { u32 _resvd; }; /* * fcpio_echo_cmpl: firmware -> host response * * response to the fcpio_echo request */ struct fcpio_echo_cmpl { u32 _resvd; }; /* * fcpio_lunmap_chng: firmware -> host notification * * scsi vnic only * notifies the host that the lunmap tables have changed */ struct fcpio_lunmap_chng { u32 _resvd; }; /* * fcpio_lunmap_req_cmpl: firmware -> host response * * scsi vnic only * response for lunmap table request from the host */ struct fcpio_lunmap_req_cmpl { u32 _resvd; }; /* * Basic structure for all fcpio structures that are sent from the firmware to * the host. They are 64 bytes per structure. */ #define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */ struct fcpio_fw_req { struct fcpio_header hdr; union { /* * Defines space needed for request */ u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)]; /* * Initiator firmware responses */ struct fcpio_icmnd_cmpl icmnd_cmpl; struct fcpio_itmf_cmpl itmf_cmpl; /* * Target firmware new requests */ struct fcpio_tcmnd_16 tcmnd_16; struct fcpio_tcmnd_32 tcmnd_32; /* * Target firmware responses */ struct fcpio_tdrsp_cmpl tdrsp_cmpl; struct fcpio_ttmf ttmf; struct fcpio_tabort_cmpl tabort_cmpl; /* * Firmware response to work received */ struct fcpio_ack ack; /* * Misc requests */ struct fcpio_reset_cmpl reset_cmpl; struct fcpio_flogi_reg_cmpl flogi_reg_cmpl; struct fcpio_echo_cmpl echo_cmpl; struct fcpio_lunmap_chng lunmap_chng; struct fcpio_lunmap_req_cmpl lunmap_req_cmpl; } u; }; /* * Access routines to encode and decode the color bit, which is the most * significant bit of the MSB of the structure */ static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color) { u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; if (color) *c |= 0x80; else *c &= ~0x80; } static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color) { u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; *color = *c >> 7; /* * Make sure color bit is read from desc *before* other fields * are read from desc. Hardware guarantees color bit is last * bit (byte) written. Adding the rmb() prevents the compiler * and/or CPU from reordering the reads which would potentially * result in reading stale values. */ rmb(); } /* * Lunmap table entry for scsi vnics */ #define FCPIO_LUNMAP_TABLE_SIZE 256 #define FCPIO_FLAGS_LUNMAP_VALID 0x80 #define FCPIO_FLAGS_BOOT 0x01 struct fcpio_lunmap_entry { u8 bus; u8 target; u8 lun; u8 path_cnt; u16 flags; u16 update_cnt; }; struct fcpio_lunmap_tbl { u32 update_cnt; struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE]; }; #endif /* _FCPIO_H_ */