mirror of https://gitee.com/openkylin/linux.git
341 lines
9.6 KiB
C
341 lines
9.6 KiB
C
/*
|
|
* Copyright (c) 2010-2011 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef AR9003_EEPROM_H
|
|
#define AR9003_EEPROM_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
#define AR9300_EEP_VER 0xD000
|
|
#define AR9300_EEP_VER_MINOR_MASK 0xFFF
|
|
#define AR9300_EEP_MINOR_VER_1 0x1
|
|
#define AR9300_EEP_MINOR_VER AR9300_EEP_MINOR_VER_1
|
|
|
|
/* 16-bit offset location start of calibration struct */
|
|
#define AR9300_EEP_START_LOC 256
|
|
#define AR9300_NUM_5G_CAL_PIERS 8
|
|
#define AR9300_NUM_2G_CAL_PIERS 3
|
|
#define AR9300_NUM_5G_20_TARGET_POWERS 8
|
|
#define AR9300_NUM_5G_40_TARGET_POWERS 8
|
|
#define AR9300_NUM_2G_CCK_TARGET_POWERS 2
|
|
#define AR9300_NUM_2G_20_TARGET_POWERS 3
|
|
#define AR9300_NUM_2G_40_TARGET_POWERS 3
|
|
/* #define AR9300_NUM_CTLS 21 */
|
|
#define AR9300_NUM_CTLS_5G 9
|
|
#define AR9300_NUM_CTLS_2G 12
|
|
#define AR9300_NUM_BAND_EDGES_5G 8
|
|
#define AR9300_NUM_BAND_EDGES_2G 4
|
|
#define AR9300_EEPMISC_BIG_ENDIAN 0x01
|
|
#define AR9300_EEPMISC_WOW 0x02
|
|
#define AR9300_CUSTOMER_DATA_SIZE 20
|
|
|
|
#define AR9300_MAX_CHAINS 3
|
|
#define AR9300_ANT_16S 25
|
|
#define AR9300_FUTURE_MODAL_SZ 6
|
|
|
|
#define AR9300_PAPRD_RATE_MASK 0x01ffffff
|
|
#define AR9300_PAPRD_SCALE_1 0x0e000000
|
|
#define AR9300_PAPRD_SCALE_1_S 25
|
|
#define AR9300_PAPRD_SCALE_2 0x70000000
|
|
#define AR9300_PAPRD_SCALE_2_S 28
|
|
|
|
/* Delta from which to start power to pdadc table */
|
|
/* This offset is used in both open loop and closed loop power control
|
|
* schemes. In open loop power control, it is not really needed, but for
|
|
* the "sake of consistency" it was kept. For certain AP designs, this
|
|
* value is overwritten by the value in the flag "pwrTableOffset" just
|
|
* before writing the pdadc vs pwr into the chip registers.
|
|
*/
|
|
#define AR9300_PWR_TABLE_OFFSET 0
|
|
|
|
/* byte addressable */
|
|
#define AR9300_EEPROM_SIZE (16*1024)
|
|
|
|
#define AR9300_BASE_ADDR_4K 0xfff
|
|
#define AR9300_BASE_ADDR 0x3ff
|
|
#define AR9300_BASE_ADDR_512 0x1ff
|
|
|
|
#define AR9300_OTP_BASE 0x14000
|
|
#define AR9300_OTP_STATUS 0x15f18
|
|
#define AR9300_OTP_STATUS_TYPE 0x7
|
|
#define AR9300_OTP_STATUS_VALID 0x4
|
|
#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
|
|
#define AR9300_OTP_STATUS_SM_BUSY 0x1
|
|
#define AR9300_OTP_READ_DATA 0x15f1c
|
|
|
|
enum targetPowerHTRates {
|
|
HT_TARGET_RATE_0_8_16,
|
|
HT_TARGET_RATE_1_3_9_11_17_19,
|
|
HT_TARGET_RATE_4,
|
|
HT_TARGET_RATE_5,
|
|
HT_TARGET_RATE_6,
|
|
HT_TARGET_RATE_7,
|
|
HT_TARGET_RATE_12,
|
|
HT_TARGET_RATE_13,
|
|
HT_TARGET_RATE_14,
|
|
HT_TARGET_RATE_15,
|
|
HT_TARGET_RATE_20,
|
|
HT_TARGET_RATE_21,
|
|
HT_TARGET_RATE_22,
|
|
HT_TARGET_RATE_23
|
|
};
|
|
|
|
enum targetPowerLegacyRates {
|
|
LEGACY_TARGET_RATE_6_24,
|
|
LEGACY_TARGET_RATE_36,
|
|
LEGACY_TARGET_RATE_48,
|
|
LEGACY_TARGET_RATE_54
|
|
};
|
|
|
|
enum targetPowerCckRates {
|
|
LEGACY_TARGET_RATE_1L_5L,
|
|
LEGACY_TARGET_RATE_5S,
|
|
LEGACY_TARGET_RATE_11L,
|
|
LEGACY_TARGET_RATE_11S
|
|
};
|
|
|
|
enum ar9300_Rates {
|
|
ALL_TARGET_LEGACY_6_24,
|
|
ALL_TARGET_LEGACY_36,
|
|
ALL_TARGET_LEGACY_48,
|
|
ALL_TARGET_LEGACY_54,
|
|
ALL_TARGET_LEGACY_1L_5L,
|
|
ALL_TARGET_LEGACY_5S,
|
|
ALL_TARGET_LEGACY_11L,
|
|
ALL_TARGET_LEGACY_11S,
|
|
ALL_TARGET_HT20_0_8_16,
|
|
ALL_TARGET_HT20_1_3_9_11_17_19,
|
|
ALL_TARGET_HT20_4,
|
|
ALL_TARGET_HT20_5,
|
|
ALL_TARGET_HT20_6,
|
|
ALL_TARGET_HT20_7,
|
|
ALL_TARGET_HT20_12,
|
|
ALL_TARGET_HT20_13,
|
|
ALL_TARGET_HT20_14,
|
|
ALL_TARGET_HT20_15,
|
|
ALL_TARGET_HT20_20,
|
|
ALL_TARGET_HT20_21,
|
|
ALL_TARGET_HT20_22,
|
|
ALL_TARGET_HT20_23,
|
|
ALL_TARGET_HT40_0_8_16,
|
|
ALL_TARGET_HT40_1_3_9_11_17_19,
|
|
ALL_TARGET_HT40_4,
|
|
ALL_TARGET_HT40_5,
|
|
ALL_TARGET_HT40_6,
|
|
ALL_TARGET_HT40_7,
|
|
ALL_TARGET_HT40_12,
|
|
ALL_TARGET_HT40_13,
|
|
ALL_TARGET_HT40_14,
|
|
ALL_TARGET_HT40_15,
|
|
ALL_TARGET_HT40_20,
|
|
ALL_TARGET_HT40_21,
|
|
ALL_TARGET_HT40_22,
|
|
ALL_TARGET_HT40_23,
|
|
ar9300RateSize,
|
|
};
|
|
|
|
|
|
struct eepFlags {
|
|
u8 opFlags;
|
|
u8 eepMisc;
|
|
} __packed;
|
|
|
|
enum CompressAlgorithm {
|
|
_CompressNone = 0,
|
|
_CompressLzma,
|
|
_CompressPairs,
|
|
_CompressBlock,
|
|
_Compress4,
|
|
_Compress5,
|
|
_Compress6,
|
|
_Compress7,
|
|
};
|
|
|
|
struct ar9300_base_eep_hdr {
|
|
__le16 regDmn[2];
|
|
/* 4 bits tx and 4 bits rx */
|
|
u8 txrxMask;
|
|
struct eepFlags opCapFlags;
|
|
u8 rfSilent;
|
|
u8 blueToothOptions;
|
|
u8 deviceCap;
|
|
/* takes lower byte in eeprom location */
|
|
u8 deviceType;
|
|
/* offset in dB to be added to beginning
|
|
* of pdadc table in calibration
|
|
*/
|
|
int8_t pwrTableOffset;
|
|
u8 params_for_tuning_caps[2];
|
|
/*
|
|
* bit0 - enable tx temp comp
|
|
* bit1 - enable tx volt comp
|
|
* bit2 - enable fastClock - default to 1
|
|
* bit3 - enable doubling - default to 1
|
|
* bit4 - enable internal regulator - default to 1
|
|
*/
|
|
u8 featureEnable;
|
|
/* misc flags: bit0 - turn down drivestrength */
|
|
u8 miscConfiguration;
|
|
u8 eepromWriteEnableGpio;
|
|
u8 wlanDisableGpio;
|
|
u8 wlanLedGpio;
|
|
u8 rxBandSelectGpio;
|
|
u8 txrxgain;
|
|
/* SW controlled internal regulator fields */
|
|
__le32 swreg;
|
|
} __packed;
|
|
|
|
struct ar9300_modal_eep_header {
|
|
/* 4 idle, t1, t2, b (4 bits per setting) */
|
|
__le32 antCtrlCommon;
|
|
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
|
|
__le32 antCtrlCommon2;
|
|
/* 6 idle, t, r, rx1, rx12, b (2 bits each) */
|
|
__le16 antCtrlChain[AR9300_MAX_CHAINS];
|
|
/* 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
|
|
u8 xatten1DB[AR9300_MAX_CHAINS];
|
|
/* 3 xatten1_margin for merlin (0xa20c/b20c 16:12 */
|
|
u8 xatten1Margin[AR9300_MAX_CHAINS];
|
|
int8_t tempSlope;
|
|
int8_t voltSlope;
|
|
/* spur channels in usual fbin coding format */
|
|
u8 spurChans[AR_EEPROM_MODAL_SPURS];
|
|
/* 3 Check if the register is per chain */
|
|
int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS];
|
|
u8 reserved[11];
|
|
int8_t quick_drop;
|
|
u8 xpaBiasLvl;
|
|
u8 txFrameToDataStart;
|
|
u8 txFrameToPaOn;
|
|
u8 txClip;
|
|
int8_t antennaGain;
|
|
u8 switchSettling;
|
|
int8_t adcDesiredSize;
|
|
u8 txEndToXpaOff;
|
|
u8 txEndToRxOn;
|
|
u8 txFrameToXpaOn;
|
|
u8 thresh62;
|
|
__le32 papdRateMaskHt20;
|
|
__le32 papdRateMaskHt40;
|
|
__le16 switchcomspdt;
|
|
u8 futureModal[8];
|
|
} __packed;
|
|
|
|
struct ar9300_cal_data_per_freq_op_loop {
|
|
int8_t refPower;
|
|
/* pdadc voltage at power measurement */
|
|
u8 voltMeas;
|
|
/* pcdac used for power measurement */
|
|
u8 tempMeas;
|
|
/* range is -60 to -127 create a mapping equation 1db resolution */
|
|
int8_t rxNoisefloorCal;
|
|
/*range is same as noisefloor */
|
|
int8_t rxNoisefloorPower;
|
|
/* temp measured when noisefloor cal was performed */
|
|
u8 rxTempMeas;
|
|
} __packed;
|
|
|
|
struct cal_tgt_pow_legacy {
|
|
u8 tPow2x[4];
|
|
} __packed;
|
|
|
|
struct cal_tgt_pow_ht {
|
|
u8 tPow2x[14];
|
|
} __packed;
|
|
|
|
struct cal_ctl_data_2g {
|
|
u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
|
|
} __packed;
|
|
|
|
struct cal_ctl_data_5g {
|
|
u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
|
|
} __packed;
|
|
|
|
struct ar9300_BaseExtension_1 {
|
|
u8 ant_div_control;
|
|
u8 future[11];
|
|
int8_t quick_drop_low;
|
|
int8_t quick_drop_high;
|
|
} __packed;
|
|
|
|
struct ar9300_BaseExtension_2 {
|
|
int8_t tempSlopeLow;
|
|
int8_t tempSlopeHigh;
|
|
u8 xatten1DBLow[AR9300_MAX_CHAINS];
|
|
u8 xatten1MarginLow[AR9300_MAX_CHAINS];
|
|
u8 xatten1DBHigh[AR9300_MAX_CHAINS];
|
|
u8 xatten1MarginHigh[AR9300_MAX_CHAINS];
|
|
} __packed;
|
|
|
|
struct ar9300_eeprom {
|
|
u8 eepromVersion;
|
|
u8 templateVersion;
|
|
u8 macAddr[6];
|
|
u8 custData[AR9300_CUSTOMER_DATA_SIZE];
|
|
|
|
struct ar9300_base_eep_hdr baseEepHeader;
|
|
|
|
struct ar9300_modal_eep_header modalHeader2G;
|
|
struct ar9300_BaseExtension_1 base_ext1;
|
|
u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS];
|
|
struct ar9300_cal_data_per_freq_op_loop
|
|
calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS];
|
|
u8 calTarget_freqbin_Cck[AR9300_NUM_2G_CCK_TARGET_POWERS];
|
|
u8 calTarget_freqbin_2G[AR9300_NUM_2G_20_TARGET_POWERS];
|
|
u8 calTarget_freqbin_2GHT20[AR9300_NUM_2G_20_TARGET_POWERS];
|
|
u8 calTarget_freqbin_2GHT40[AR9300_NUM_2G_40_TARGET_POWERS];
|
|
struct cal_tgt_pow_legacy
|
|
calTargetPowerCck[AR9300_NUM_2G_CCK_TARGET_POWERS];
|
|
struct cal_tgt_pow_legacy
|
|
calTargetPower2G[AR9300_NUM_2G_20_TARGET_POWERS];
|
|
struct cal_tgt_pow_ht
|
|
calTargetPower2GHT20[AR9300_NUM_2G_20_TARGET_POWERS];
|
|
struct cal_tgt_pow_ht
|
|
calTargetPower2GHT40[AR9300_NUM_2G_40_TARGET_POWERS];
|
|
u8 ctlIndex_2G[AR9300_NUM_CTLS_2G];
|
|
u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G];
|
|
struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G];
|
|
struct ar9300_modal_eep_header modalHeader5G;
|
|
struct ar9300_BaseExtension_2 base_ext2;
|
|
u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS];
|
|
struct ar9300_cal_data_per_freq_op_loop
|
|
calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS];
|
|
u8 calTarget_freqbin_5G[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
u8 calTarget_freqbin_5GHT20[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
u8 calTarget_freqbin_5GHT40[AR9300_NUM_5G_40_TARGET_POWERS];
|
|
struct cal_tgt_pow_legacy
|
|
calTargetPower5G[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
struct cal_tgt_pow_ht
|
|
calTargetPower5GHT20[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
struct cal_tgt_pow_ht
|
|
calTargetPower5GHT40[AR9300_NUM_5G_40_TARGET_POWERS];
|
|
u8 ctlIndex_5G[AR9300_NUM_CTLS_5G];
|
|
u8 ctl_freqbin_5G[AR9300_NUM_CTLS_5G][AR9300_NUM_BAND_EDGES_5G];
|
|
struct cal_ctl_data_5g ctlPowerData_5G[AR9300_NUM_CTLS_5G];
|
|
} __packed;
|
|
|
|
s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah);
|
|
s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah);
|
|
|
|
u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz);
|
|
|
|
unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
|
|
struct ath9k_channel *chan);
|
|
|
|
void ar9003_hw_internal_regulator_apply(struct ath_hw *ah);
|
|
|
|
#endif
|