..
accel
iio: accel: st_accel: inline per-sensor data
2016-11-19 12:25:36 +00:00
adc
iio: adc: Add support for STM32 ADC
2016-11-19 12:18:33 +00:00
amplifiers
spi: Updates for v4.4
2015-11-05 13:15:12 -08:00
buffer
iio: add resource managed triggered buffer init helpers
2016-09-04 15:42:46 +01:00
chemical
iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
2016-10-23 22:18:27 +01:00
common
Third set of IIO new device support, features and cleanup for the 4.10 cycle.
2016-11-16 17:20:40 +01:00
counter
iio: 104-quad-8: Fix active level mismatch for the preset enable option
2016-12-03 10:08:09 +00:00
dac
iio: dpot-dac: DAC driver based on a digital potentiometer
2016-11-13 13:07:15 +00:00
dummy
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
frequency
iio: frequency: ad9523: use unsigned int rather then bare unsigned
2016-04-17 10:31:03 +01:00
gyro
iio: gyro: st_gyro: inline per-sensor data
2016-11-12 15:38:09 +00:00
health
First round of IIO new device support, features and cleanups for the 4.8 cycle.
2016-06-09 09:15:58 -07:00
humidity
iio: si7020: Add devicetree support and trivial bindings
2016-11-01 18:49:53 +00:00
imu
iio: bmi160: Fix time needed to sleep after command execution
2016-12-30 10:52:00 +00:00
light
iio: tsl2583: make array large enough
2016-11-24 20:09:55 +00:00
magnetometer
iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor
2016-11-24 20:41:30 +00:00
orientation
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
2016-11-05 17:47:47 +00:00
potentiometer
iio: mcp4531: provide range of available raw values
2016-11-13 11:40:26 +00:00
potentiostat
iio: potentiostat: add LMP91000 support
2016-09-27 20:33:03 +01:00
pressure
iio: pressure: st_pressure: inline per-sensor data
2016-11-12 15:50:10 +00:00
proximity
iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management
2016-10-23 19:34:26 +01:00
temperature
iio: maxim_thermocouple: detect invalid storage size in read()
2016-11-13 10:08:32 +01:00
trigger
iio:trigger: Experimental kthread tight loop trigger (thread only)
2016-06-03 13:18:44 +01:00
Kconfig
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
Makefile
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
iio_core.h
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
iio_core_trigger.h
…
industrialio-buffer.c
iio: Use kmalloc_array() in iio_scan_mask_set()
2016-09-24 16:35:24 +01:00
industrialio-configfs.c
iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
2015-12-05 16:25:30 +00:00
industrialio-core.c
iio:core: add a callback to allow drivers to provide _available attributes
2016-11-13 11:40:25 +00:00
industrialio-event.c
iio: iio_push_event(): Don't crash if the event interface is not registered
2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
iio: core: fix ptr_ret.cocci warnings
2016-01-20 17:09:18 -08:00
industrialio-trigger.c
iio:trigger: Add helper function to verify that a trigger belongs to the same device
2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
iio: Support triggered events
2015-08-27 20:47:09 +01:00
inkern.c
iio: inkern: add helpers to query available values from channels
2016-11-13 11:40:26 +00:00
01d1f7a99e