linux/arch/arm/boot/dts/sun9i-a80.dtsi

934 lines
24 KiB
Plaintext

/*
* Copyright 2014 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x1>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x3>;
};
cpu4: cpu@100 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0x100>;
};
cpu5: cpu@101 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0x101>;
};
cpu6: cpu@102 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0x102>;
};
cpu7: cpu@103 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0x103>;
};
};
memory {
/* 8GB max. with LPAE */
reg = <0 0x20000000 0x02 0>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <24000000>;
arm,cpu-registers-not-fw-configured;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
/*
* map 64 bit address range down to 32 bits,
* as the peripherals are all under 512MB.
*/
ranges = <0 0 0 0x20000000>;
/*
* This clock is actually configurable from the PRCM address
* space. The external 24M oscillator can be turned off, and
* the clock switched to an internal 16M RC oscillator. Under
* normal operation there's no reason to do this, and the
* default is to use the external good one, so just model this
* as a fixed clock. Also it is not entirely clear if the
* osc24M mux in the PRCM affects the entire clock tree, which
* would also throw all the PLL clock rates off, or just the
* downstream clocks in the PRCM.
*/
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
/*
* The 32k clock is from an external source, normally the
* AC100 codec/RTC chip. This serves as a placeholder for
* board dts files to specify the source.
*/
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clock-output-names = "osc32k";
};
usb_mod_clk: clk@00a08000 {
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun9i-a80-usb-mod-clk";
reg = <0x00a08000 0x4>;
clocks = <&ahb1_gates 1>;
clock-output-names = "usb0_ahb", "usb_ohci0",
"usb1_ahb", "usb_ohci1",
"usb2_ahb", "usb_ohci2";
};
usb_phy_clk: clk@00a08004 {
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun9i-a80-usb-phy-clk";
reg = <0x00a08004 0x4>;
clocks = <&ahb1_gates 1>;
clock-output-names = "usb_phy0", "usb_hsic1_480M",
"usb_phy1", "usb_hsic2_480M",
"usb_phy2", "usb_hsic_12M";
};
pll3: clk@06000008 {
/* placeholder until implemented */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-rate = <0>;
clock-output-names = "pll3";
};
pll4: clk@0600000c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
reg = <0x0600000c 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll4";
};
pll12: clk@0600002c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
reg = <0x0600002c 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll12";
};
gt_clk: clk@0600005c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x0600005c 0x4>;
clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
clock-output-names = "gt";
};
ahb0: clk@06000060 {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-ahb-clk";
reg = <0x06000060 0x4>;
clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
clock-output-names = "ahb0";
};
ahb1: clk@06000064 {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-ahb-clk";
reg = <0x06000064 0x4>;
clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
clock-output-names = "ahb1";
};
ahb2: clk@06000068 {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-ahb-clk";
reg = <0x06000068 0x4>;
clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
clock-output-names = "ahb2";
};
apb0: clk@06000070 {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-apb0-clk";
reg = <0x06000070 0x4>;
clocks = <&osc24M>, <&pll4>;
clock-output-names = "apb0";
};
apb1: clk@06000074 {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-apb1-clk";
reg = <0x06000074 0x4>;
clocks = <&osc24M>, <&pll4>;
clock-output-names = "apb1";
};
cci400_clk: clk@06000078 {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x06000078 0x4>;
clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
clock-output-names = "cci400";
};
mmc0_clk: clk@06000410 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-mmc-clk";
reg = <0x06000410 0x4>;
clocks = <&osc24M>, <&pll4>;
clock-output-names = "mmc0", "mmc0_output",
"mmc0_sample";
};
mmc1_clk: clk@06000414 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-mmc-clk";
reg = <0x06000414 0x4>;
clocks = <&osc24M>, <&pll4>;
clock-output-names = "mmc1", "mmc1_output",
"mmc1_sample";
};
mmc2_clk: clk@06000418 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-mmc-clk";
reg = <0x06000418 0x4>;
clocks = <&osc24M>, <&pll4>;
clock-output-names = "mmc2", "mmc2_output",
"mmc2_sample";
};
mmc3_clk: clk@0600041c {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-mmc-clk";
reg = <0x0600041c 0x4>;
clocks = <&osc24M>, <&pll4>;
clock-output-names = "mmc3", "mmc3_output",
"mmc3_sample";
};
ahb0_gates: clk@06000580 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
reg = <0x06000580 0x4>;
clocks = <&ahb0>;
clock-indices = <0>, <1>, <3>,
<5>, <8>, <12>,
<13>, <14>,
<15>, <16>, <18>,
<20>, <21>, <22>,
<23>;
clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
"ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
"ahb0_spi3";
};
ahb1_gates: clk@06000584 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
reg = <0x06000584 0x4>;
clocks = <&ahb1>;
clock-indices = <0>, <1>,
<17>, <21>,
<22>, <23>,
<24>;
clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
"ahb1_gmac", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_hstimer",
"ahb1_dma";
};
ahb2_gates: clk@06000588 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
reg = <0x06000588 0x4>;
clocks = <&ahb2>;
clock-indices = <0>, <1>,
<2>, <4>, <5>,
<7>, <8>, <11>;
clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
};
apb0_gates: clk@06000590 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-apb0-gates-clk";
reg = <0x06000590 0x4>;
clocks = <&apb0>;
clock-indices = <1>, <5>,
<11>, <12>, <13>,
<15>, <17>, <18>,
<19>;
clock-output-names = "apb0_spdif", "apb0_pio",
"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
"apb0_lradc", "apb0_gpadc", "apb0_twd",
"apb0_cirtx";
};
apb1_gates: clk@06000594 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-apb1-gates-clk";
reg = <0x06000594 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<16>, <17>,
<18>, <19>,
<20>, <21>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
"apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3",
"apb1_uart4", "apb1_uart5";
};
cpus_clk: clk@08001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
clock-output-names = "cpus";
};
ahbs: ahbs_clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
clock-mult = <1>;
clocks = <&cpus_clk>;
clock-output-names = "ahbs";
};
apbs: clk@0800141c {
compatible = "allwinner,sun8i-a23-apb0-clk";
reg = <0x0800141c 0x4>;
#clock-cells = <0>;
clocks = <&ahbs>;
clock-output-names = "apbs";
};
apbs_gates: clk@08001428 {
compatible = "allwinner,sun9i-a80-apbs-gates-clk";
reg = <0x08001428 0x4>;
#clock-cells = <1>;
clocks = <&apbs>;
clock-indices = <0>, <1>,
<2>, <3>,
<4>, <5>,
<6>, <7>,
<12>, <13>,
<16>, <17>,
<18>, <20>;
clock-output-names = "apbs_pio", "apbs_ir",
"apbs_timer", "apbs_rsb",
"apbs_uart", "apbs_1wire",
"apbs_i2c0", "apbs_i2c1",
"apbs_ps2_0", "apbs_ps2_1",
"apbs_dma", "apbs_i2s0",
"apbs_i2s1", "apbs_twd";
};
r_1wire_clk: clk@08001450 {
reg = <0x08001450 0x4>;
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "r_1wire";
};
r_ir_clk: clk@08001454 {
reg = <0x08001454 0x4>;
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "r_ir";
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/*
* map 64 bit address range down to 32 bits,
* as the peripherals are all under 512MB.
*/
ranges = <0 0 0 0x20000000>;
ehci0: usb@00a00000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a00000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_mod_clk 1>;
resets = <&usb_mod_clk 17>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
};
ohci0: usb@00a00400 {
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a00400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
resets = <&usb_mod_clk 17>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
};
usbphy1: phy@00a00800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a00800 0x4>;
clocks = <&usb_phy_clk 1>;
clock-names = "phy";
resets = <&usb_phy_clk 17>;
reset-names = "phy";
status = "disabled";
#phy-cells = <0>;
};
ehci1: usb@00a01000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a01000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_mod_clk 3>;
resets = <&usb_mod_clk 18>;
phys = <&usbphy2>;
phy-names = "usb";
status = "disabled";
};
usbphy2: phy@00a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
<&usb_phy_clk 3>;
clock-names = "hsic_480M", "hsic_12M", "phy";
resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
reset-names = "hsic", "phy";
status = "disabled";
#phy-cells = <0>;
/* usb1 is always used with HSIC */
phy_type = "hsic";
};
ehci2: usb@00a02000 {
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a02000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_mod_clk 5>;
resets = <&usb_mod_clk 19>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
};
ohci2: usb@00a02400 {
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a02400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
resets = <&usb_mod_clk 19>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
};
usbphy3: phy@00a02800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a02800 0x4>;
clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
<&usb_phy_clk 5>;
clock-names = "hsic_480M", "hsic_12M", "phy";
resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
reset-names = "hsic", "phy";
status = "disabled";
#phy-cells = <0>;
};
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
<&mmc0_clk 1>, <&mmc0_clk 2>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@01c10000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
<&mmc1_clk 1>, <&mmc1_clk 2>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@01c11000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
<&mmc2_clk 1>, <&mmc2_clk 2>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc3: mmc@01c12000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
<&mmc3_clk 1>, <&mmc3_clk 2>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 3>;
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc_config_clk: clk@01c13000 {
compatible = "allwinner,sun9i-a80-mmc-config-clk";
reg = <0x01c13000 0x10>;
clocks = <&ahb0_gates 8>;
clock-names = "ahb";
resets = <&ahb0_resets 8>;
reset-names = "ahb";
#clock-cells = <1>;
#reset-cells = <1>;
clock-output-names = "mmc0_config", "mmc1_config",
"mmc2_config", "mmc3_config";
};
gic: interrupt-controller@01c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
<0x01c42000 0x1000>,
<0x01c44000 0x2000>,
<0x01c46000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
ahb0_resets: reset@060005a0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x060005a0 0x4>;
};
ahb1_resets: reset@060005a4 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x060005a4 0x4>;
};
ahb2_resets: reset@060005a8 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x060005a8 0x4>;
};
apb0_resets: reset@060005b0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x060005b0 0x4>;
};
apb1_resets: reset@060005b4 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x060005b4 0x4>;
};
timer@06000c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x06000c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt: watchdog@06000ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x06000ca0 0x20>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
pio: pinctrl@06000800 {
compatible = "allwinner,sun9i-a80-pinctrl";
reg = <0x06000800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;
i2c3_pins_a: i2c3@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "i2c3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins: mmc0 {
allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
"PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc2_8bit_pins: mmc2_8bit {
allwinner,pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
"PC16";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PH12", "PH13";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_a: uart4@0 {
allwinner,pins = "PG12", "PG13", "PG14", "PG15";
allwinner,function = "uart4";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
uart0: serial@07000000 {
compatible = "snps,dw-apb-uart";
reg = <0x07000000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
resets = <&apb1_resets 16>;
status = "disabled";
};
uart1: serial@07000400 {
compatible = "snps,dw-apb-uart";
reg = <0x07000400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
resets = <&apb1_resets 17>;
status = "disabled";
};
uart2: serial@07000800 {
compatible = "snps,dw-apb-uart";
reg = <0x07000800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
resets = <&apb1_resets 18>;
status = "disabled";
};
uart3: serial@07000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x07000c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
resets = <&apb1_resets 19>;
status = "disabled";
};
uart4: serial@07001000 {
compatible = "snps,dw-apb-uart";
reg = <0x07001000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
resets = <&apb1_resets 20>;
status = "disabled";
};
uart5: serial@07001400 {
compatible = "snps,dw-apb-uart";
reg = <0x07001400 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
resets = <&apb1_resets 21>;
status = "disabled";
};
i2c0: i2c@07002800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002800 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
resets = <&apb1_resets 0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@07002c00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002c00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
resets = <&apb1_resets 1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@07003000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
resets = <&apb1_resets 2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c3: i2c@07003400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
resets = <&apb1_resets 3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c4: i2c@07003800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003800 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 4>;
resets = <&apb1_resets 4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
r_wdt: watchdog@08001000 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x08001000 0x20>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
apbs_rst: reset@080014b0 {
reg = <0x080014b0 0x4>;
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
nmi_intc: interrupt-controller@080015a0 {
compatible = "allwinner,sun9i-a80-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x080015a0 0xc>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
r_ir: ir@08002000 {
compatible = "allwinner,sun5i-a13-ir";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&r_ir_pins>;
clocks = <&apbs_gates 1>, <&r_ir_clk>;
clock-names = "apb", "ir";
resets = <&apbs_rst 1>;
reg = <0x08002000 0x40>;
status = "disabled";
};
r_uart: serial@08002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apbs_gates 4>;
resets = <&apbs_rst 4>;
status = "disabled";
};
r_pio: pinctrl@08002c00 {
compatible = "allwinner,sun9i-a80-r-pinctrl";
reg = <0x08002c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apbs_gates 0>;
resets = <&apbs_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
r_ir_pins: r_ir {
allwinner,pins = "PL6";
allwinner,function = "s_cir_rx";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
r_rsb_pins: r_rsb {
allwinner,pins = "PN0", "PN1";
allwinner,function = "s_rsb";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
r_rsb: i2c@08003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apbs_gates 3>;
clock-frequency = <3000000>;
resets = <&apbs_rst 3>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};